-
Antiferromagnetic Switching in Mn$_2$Au Using a Novel Laser Induced Optical Torque on Ultrafast Timescales
Authors:
J. L. Ross,
P-I. Gavriloaea,
F. Freimuth,
T. Adamantopoulos,
Y. Mokrousov,
R. F. L. Evans,
R. Chantrell,
R. M. Otxoa,
O. Chubykalo-Fesenko
Abstract:
Efficient manipulation of the Néel vector in antiferromagnets can be induced by generation of spin orbit (SOT) or spin-transfer (STT) torques. Here we predict another possibility for antiferromagnetic domain switching by using a non-zero staggered field induced from optical laser excitation. We present results on the atomistic scale dynamic simulations from the application of a novel laser induced…
▽ More
Efficient manipulation of the Néel vector in antiferromagnets can be induced by generation of spin orbit (SOT) or spin-transfer (STT) torques. Here we predict another possibility for antiferromagnetic domain switching by using a non-zero staggered field induced from optical laser excitation. We present results on the atomistic scale dynamic simulations from the application of a novel laser induced torque using optical frequencies for all-optical switching (AOS) of the Néel vector in the antiferromagnet Mn$_2$Au. The driving mechanism takes advantage of the sizeable 'exchange enhancement' characteristic of antiferromagnets, allowing for small picosecond 90 and 180 degree precessional switching with laser fluences on the order of mJ/cm$^2$. The symmetry of these novel torques are highly dependent on the time-varying magnetisation direction, creating a sign change in the torque which greatly minimises the "over-shooting problem" common to SOT and STT. Lastly, we demonstrate the opportunity for this laser optical torque to deterministically switch single magnetic domains.
△ Less
Submitted 16 November, 2023; v1 submitted 31 October, 2023;
originally announced November 2023.
-
A device-independent approach to evaluate the heating performance during magnetic hyperthermia experiments: peak analysis and zigzag protocol
Authors:
Sergiu Ruta,
Yilian Fernández-Afonso,
Samuel E. Rannala,
M. Puerto Morales,
Sabino Veintemillas-Verdaguer,
Carlton Jones,
Lucía Gutiérre,
Roy W Chantrell,
David Serantes
Abstract:
Accurate knowledge of the heating performance of magnetic nanoparticles (MNPs) under AC fields is critical for the development of hyperthermia-mediated applications. Usually reported in terms of the specific loss power (SLP) obtained from the temperature variation ($Δ{T}$) vs. time (t) curve, such estimate is subjected to a huge uncertainty. Thus, very different SLP values are reported for the sam…
▽ More
Accurate knowledge of the heating performance of magnetic nanoparticles (MNPs) under AC fields is critical for the development of hyperthermia-mediated applications. Usually reported in terms of the specific loss power (SLP) obtained from the temperature variation ($Δ{T}$) vs. time (t) curve, such estimate is subjected to a huge uncertainty. Thus, very different SLP values are reported for the same particles when measured on different equipment/laboratories. This lack of control clearly hampers the further development of MNP-mediated heat-triggered technologies. Here we report a device-independent approach to calculate the SLP value of a suspension of MNPs: the SLP is obtained from the analysis of the peak at the field on/off switch of the $Δ{T}(t)$ curve. The measurement procedure, which itself constitutes a change of paradigm within the field, is based on fundamental physics considerations: specifically to guarantee the applicability of Newton's law of cooling, as i) it corresponds to the ideal scenario in which the temperature profiles of the system during heating and cooling are the same; and ii) it diminishes the role of coexistence of various heat dissipation channels. Such an approach is supported by theoretical and computational calculations to increase the reliability and reproducibility of SLP determination. This is experimentally confirmed, demonstrating a reduction in SLP variation across 3 different devices located in 3 different laboratories. Furthermore, the application of this peak analysis method (PAM) to a rapid succession of field on/off switches that result in a zigzag-like $Δ{T}(t)$, which we term the zigzag protocol, allows evaluating possible variations of the SLP values with time or temperature.
△ Less
Submitted 21 July, 2023;
originally announced July 2023.
-
Single-shot laser-induced switching of an exchange biased antiferromagnet
Authors:
Zongxia Guo,
Junlin Wang,
Gregory Malinowski,
Boyu Zhang,
Wei Zhang,
Hangtian Wang,
Chen Liu,
Yi Peng,
Pierre Vallobra,
Yongbing Xu,
Sarah Jenkins,
Roy W. Chantrell,
Richard F. L. Evans,
Stéphane Mangin,
Weisheng Zhao,
Michel Hehn
Abstract:
Ultrafast manipulation of magnetic order has challenged our understanding the fundamental and dynamic properties of magnetic materials. So far single shot magnetic switching has been limited to ferrimagnetic alloys and multilayers. In ferromagnetic (FM)/antiferromagnetic (AFM) bilayers, exchange bias (He) arises from the interfacial exchange coupling between the two layers and reflects the microsc…
▽ More
Ultrafast manipulation of magnetic order has challenged our understanding the fundamental and dynamic properties of magnetic materials. So far single shot magnetic switching has been limited to ferrimagnetic alloys and multilayers. In ferromagnetic (FM)/antiferromagnetic (AFM) bilayers, exchange bias (He) arises from the interfacial exchange coupling between the two layers and reflects the microscopic orientation of the antiferromagnet. Here we demonstrate the possibility of single shot switching of the antiferromagnet (change of the sign and amplitude of He) with a single femtosecond laser pulse in IrMn/CoGd bilayers. We demonstrate the switching for a wide range of fluences for different layer thicknesses and compositions. Atomistic simulations predict ultrafast switching and recovery of the AFM magnetization on a timescale of 2 ps. These results provide the fastest and the most energy-efficient method to set the exchange bias and pave the way to potential applications for ultrafast spintronic devices.
△ Less
Submitted 9 February, 2023;
originally announced February 2023.
-
Generalised form of the magnetic anisotropy field in micromagnetic and atomistic spin models
Authors:
Jack B. Collings,
Ricardo Rama-Eiroa,
Rubén M. Otxoa,
Richard F. L. Evans,
Roy W. Chantrell
Abstract:
We present a general approach to the derivation of the effective anisotropy field which determines the dynamical behaviour of magnetic spins according to the Landau-Lifshitz-Gilbert equation. The approach is based on the gradient in spherical polar coordinates with the final results being expressed in Cartesian coordinates as usually applied in atomistic and micromagnetic model calculations. The a…
▽ More
We present a general approach to the derivation of the effective anisotropy field which determines the dynamical behaviour of magnetic spins according to the Landau-Lifshitz-Gilbert equation. The approach is based on the gradient in spherical polar coordinates with the final results being expressed in Cartesian coordinates as usually applied in atomistic and micromagnetic model calculations. The approach is generally valid for all orders of anisotropies including higher order combinations of azimuthal and rotational anisotropies often found in functional magnetic materials such as permanent magnets and an emerging class of antiferromagnetic materials with applications in spintronics. Anisotropies are represented in terms of spherical harmonics which have the important property of rational temperature scaling. Effective field vectors are given for anisotropies up to sixth order, presenting a unified framework for implementing higher order magnetic anisotropies in numerical simulations.
△ Less
Submitted 19 January, 2023; v1 submitted 19 October, 2022;
originally announced October 2022.
-
Models of Advance Recording Systems: A Multi-timescale Micromagnetic code for granular thin film magnetic recording systems
Authors:
Samuel Ewan Rannala,
Andrea Meo,
Sergiu Ruta,
Wasan Pantasri,
Roy W. Chantrell,
Phanwadee Chureemart,
Jessada Chureemart
Abstract:
Micromagnetic modelling provides the ability to simulate large magnetic systems accurately without the computational cost limitation imposed by atomistic modelling. Through micromagnetic modelling it is possible to simulate systems consisting of thousands of grains over a time range of nanoseconds to years, depending upon the solver used. Here we present the creation and release of an open-source…
▽ More
Micromagnetic modelling provides the ability to simulate large magnetic systems accurately without the computational cost limitation imposed by atomistic modelling. Through micromagnetic modelling it is possible to simulate systems consisting of thousands of grains over a time range of nanoseconds to years, depending upon the solver used. Here we present the creation and release of an open-source multi-timescale micromagnetic code combining three key solvers: Landau-Lifshitz-Gilbert; Landau-Lifshitz-Bloch; Kinetic Monte Carlo. This code, called MARS (Models of Advanced Recording Systems), is capable of accurately simulating the magnetisation dynamics in large and structurally complex single- and multi-layered granular systems. The short timescale simulations are achieved for systems far from and close to the Curie point via the implemented Landau-Lifshitz-Gilbert and Landau-Lifshitz-Bloch solvers respectively. This enables read/write simulations for general perpendicular magnetic recording and also state of the art heat assisted magnetic recording (HAMR). The long timescale behaviour is simulated via the Kinetic Monte Carlo solver, enabling investigations into signal-to-noise ratio and data longevity. The combination of these solvers opens up the possibility of multi-timescale simulations within a single software package. For example the entire HAMR process from initial data writing and data read back to long term data storage is possible via a single simulation using MARS. The use of atomistic parameterisation for the material input of MARS enables highly accurate material descriptions which provide a bridge between atomistic simulation and real world experimentation. Thus MARS is capable of performing simulations for all aspects of recording media research and development. This ranges from material characterisation and optimisation to system design and implementation.
△ Less
Submitted 11 May, 2022;
originally announced May 2022.
-
Full-Spin-Wave-Scaled Finite Element Stochastic Micromagnetism: Mesh-Independent FUSSS LLG Simulations of Ferromagnetic Resonance and Reversal
Authors:
Harald Oezelt,
Luman Qu,
Alexander Kovacs,
Johann Fischbacher,
Markus Gusenbauer,
Roman Beigelbeck,
Dirk Praetorius,
Masao Yano,
Tetsuya Shoji,
Akira Kato,
Roy Chantrell,
Michael Winklhofer,
Gergely Zimanyi,
Thomas Schrefl
Abstract:
In this paper, we address the problem that standard stochastic Landau-Lifshitz-Gilbert (sLLG) simulations typically produce results that show unphysical mesh-size dependence. The root cause of this problem is that the effects of spin wave fluctuations are ignored in sLLG. We propose to represent the effect of these fluctuations by a "FUll-Spinwave-Scaled Stochastic LLG", or FUSSS LLG method. In FU…
▽ More
In this paper, we address the problem that standard stochastic Landau-Lifshitz-Gilbert (sLLG) simulations typically produce results that show unphysical mesh-size dependence. The root cause of this problem is that the effects of spin wave fluctuations are ignored in sLLG. We propose to represent the effect of these fluctuations by a "FUll-Spinwave-Scaled Stochastic LLG", or FUSSS LLG method. In FUSSS LLG, the intrinsic parameters of the sLLG simulations are first scaled by scaling factors that integrate out the spin wave fluctuations up to the mesh size, and the sLLG simulation is then performed with these scaled parameters. We developed FUSSS LLG by studying the Ferromagnetic Resonance (FMR) in Nd$_2$Fe$_{14}$B cubes. The nominal scaling greatly reduced the mesh size dependence relative to sLLG. We further discovered that adjusting one scaling exponent by less than 10% delivered fully mesh-size-independent results for the FMR peak. We then performed three tests and validations of our FUSSS LLG with this modified scaling. 1) We studied the same FMR but with magnetostatic fields included. 2) We simulated the total magnetization of the Nd$_2$Fe$_{14}$B cube. 3) We studied the effective, temperature- and swee** rate-dependent coercive field of the cubes. In all three cases we found that FUSSS LLG delivered essentially mesh-size-independent results, which tracked the theoretical expectations better than unscaled sLLG. Motivated by these successful validations, we propose that FUSSS LLG provides marked, qualitative progress towards accurate, high precision modeling of micromagnetics in hard, permanent magnets.
△ Less
Submitted 24 August, 2021;
originally announced August 2021.
-
Magnetisation dynamics of granular HAMR media by means of a multiscale model
Authors:
Andrea Meo,
Wasan Pantasri,
Wassana Daeng-am,
Samuel E. Rannala,
Sergiu I. Ruta,
Roy W. Chantrell,
Phanwadee Chureemart,
Jessada Chureemart
Abstract:
Heat assisted magnetic recording (HAMR) technology represents the most promising candidate to replace the current perpendicular recording paradigm to achieve higher storage densities. To better understand HAMR dynamics in granular media we need to describe accurately the magnetisation dynamics up to temperatures close to the Curie point. To this end we propose a multiscale approach based on the mi…
▽ More
Heat assisted magnetic recording (HAMR) technology represents the most promising candidate to replace the current perpendicular recording paradigm to achieve higher storage densities. To better understand HAMR dynamics in granular media we need to describe accurately the magnetisation dynamics up to temperatures close to the Curie point. To this end we propose a multiscale approach based on the micromagnetic Landau-Lifshitz-Bloch (LLB) equation of motion parametrised using atomistic calculations. The LLB formalism describes the magnetisation dynamics at finite temperature and allows to efficiently simulate large system sizes and long time scales. Atomistic simulations provide the required temperature dependent input quantities for the LLB equation, such as the equilibrium magnetisation and the anisotropy, and can be used to capture the detailed magnetisation dynamics. The multiscale approach makes possible to overcome the computational limitations of atomistic models in dealing with large systems, such as a recording track, while incorporating the basic physics of the HAMR process. We investigate the magnetisation dynamics of a single FePt grain as function of the properties of the temperature profile and applied field and test the micromagnetic results against atomistic calculations. Our results prove the appropriateness and potential of the approach proposed here where the granular model is able to reproduce the atomistic simulations and capture the main properties of a HAMR medium.
△ Less
Submitted 28 April, 2020;
originally announced April 2020.
-
Atomistic investigation of the temperature and size dependence of the energy barrier of CoFeB/MgO nanodots
Authors:
Andrea Meo,
Roman Chepulskyy,
Dmytro Apalkov,
Roy W. Chantrell,
Richard F. L. Evans
Abstract:
The balance between low power consumption and high efficiency in memory devices is a major limiting factor in the development of new technologies. Magnetic random access memories (MRAM) based on CoFeB/MgO magnetic tunnel junctions (MTJs) have been proposed as candidates to replace the current technology due to their non-volatility, high thermal stability and efficient operational performance. Unde…
▽ More
The balance between low power consumption and high efficiency in memory devices is a major limiting factor in the development of new technologies. Magnetic random access memories (MRAM) based on CoFeB/MgO magnetic tunnel junctions (MTJs) have been proposed as candidates to replace the current technology due to their non-volatility, high thermal stability and efficient operational performance. Understanding the size and temperature dependence of the energy barrier and the nature of the transition mechanism across the barrier between stable configurations is a key issue in the development of MRAM. Here we use an atomistic spin model to study the energy barrier to reversal in CoFeB/MgO nanodots to determine the effects of size, temperature and external field. We find that for practical device sizes in the 10-50 nm range the energy barrier has a complex behaviour characteristic of a transition from a coherent to domain wall driven reversal process. Such a transition region is not accessible to simple analytical estimates of the energy barrier preventing a unique theoretical calculation of the thermal stability. The atomistic simulations of the energy barrier give good agreement with experimental measurements for similar systems which are at the state of the art and can provide guidance to experiments identifying suitable materials and MTJ stacks with the desired thermal stability.
△ Less
Submitted 20 December, 2019;
originally announced December 2019.
-
Opportunities and challenges for spintronics in the microelectronic industry
Authors:
Bernard Dieny,
Ioan Lucian Prejbeanu,
Kevin Garello,
Pietro Gambardella,
Paulo Freitas,
Ronald Lehndorff,
Wolfgang Raberg,
Ursula Ebels,
Sergej O Demokritov,
Johan Akerman,
Alina Deac,
Philipp Pirro,
Christoph Adelmann,
Abdelmadjid Anane,
Andrii V Chumak,
Atsufumi Hiroata,
Stephane Mangin,
Mehmet Cengiz Onbasli,
Massimo d Aquino,
Guillaume Prenat,
Giovanni Finocchio,
Luis Lopez Diaz,
Roy Chantrell,
Oksana Chubykalo Fesenko,
Paolo Bortolotti
Abstract:
Spin-based electronics has evolved into a major field of research that broadly encompasses different classes of materials, magnetic systems, and devices. This review describes recent advances in spintronics that have the potential to impact key areas of information technology and microelectronics. We identify four main axes of research: nonvolatile memories, magnetic sensors, microwave devices, an…
▽ More
Spin-based electronics has evolved into a major field of research that broadly encompasses different classes of materials, magnetic systems, and devices. This review describes recent advances in spintronics that have the potential to impact key areas of information technology and microelectronics. We identify four main axes of research: nonvolatile memories, magnetic sensors, microwave devices, and beyond-CMOS logic. We discuss state-of-the-art developments in these areas as well as opportunities and challenges that will have to be met, both at the device and system level, in order to integrate novel spintronic functionalities and materials in mainstream microelectronic platforms.
△ Less
Submitted 28 August, 2019;
originally announced August 2019.
-
Atomistic modeling of magnetization reversal modes in $L1_{0}$ FePt nanodots with magnetically soft edges
Authors:
Jung-Wei Liao,
Unai Atxitia,
Richard F. L. Evans,
Roy W. Chantrell,
Chih-Huang Lai
Abstract:
Nanopatterned FePt nano-dots often exhibit low coercivity and a broad switching field distribution, which could arise due to edge damage during the patterning process causing a reduction in the $L1_{0}$ ordering required for a high magnetocrystalline anisotropy. Using an atomistic spin model, we study the magnetization reversal behavior of $L1_{0}$ FePt nanodots with soft magnetic edges. We show t…
▽ More
Nanopatterned FePt nano-dots often exhibit low coercivity and a broad switching field distribution, which could arise due to edge damage during the patterning process causing a reduction in the $L1_{0}$ ordering required for a high magnetocrystalline anisotropy. Using an atomistic spin model, we study the magnetization reversal behavior of $L1_{0}$ FePt nanodots with soft magnetic edges. We show that reversal is initiated by nucleation for the whole range of edge widths studied. For narrow soft edges the individual nucleation events dominate reversal; for wider edges, multiple nucleation at the edge creates a circular domain wall at the interface which precedes complete reversal. Our simulations compare well with available analytical theories. The increased edge width further reduces and saturates the required nucleation field. The nucleation field and the activation volume manipulate the thermally induced switching field distribution. By control of the properties of dot edges using proper patterning methods, it should be possible to realize exchange spring bit patterned media without additional soft layers.
△ Less
Submitted 18 November, 2014; v1 submitted 5 July, 2014;
originally announced July 2014.
-
Thermally induced error: density limit for magnetic data storage
Authors:
R. F. L. Evans,
R. W. Chantrell,
U. Nowak,
A. Lyberatos,
H-J. Richter
Abstract:
Magnetic data storage is pervasive in the preservation of digital information and the rapid pace of computer development requires ever more capacity. Increasing the storage density for magnetic hard disk drives requires a reduced bit size, previously thought to be limited by the thermal stability of the constituent magnetic grains. The limiting storage density in magnetic recording is investigated…
▽ More
Magnetic data storage is pervasive in the preservation of digital information and the rapid pace of computer development requires ever more capacity. Increasing the storage density for magnetic hard disk drives requires a reduced bit size, previously thought to be limited by the thermal stability of the constituent magnetic grains. The limiting storage density in magnetic recording is investigated treating the writing of bits as a thermodynamic process. A 'thermal writability' factor is introduced and it is shown that storage densities will be limited to 15 to 20 TBit/in^2 unless technology can move beyond the currently available write field magnitudes.
△ Less
Submitted 11 March, 2012; v1 submitted 2 November, 2011;
originally announced November 2011.
-
Rotation of easy axis in training effect and recovery of exchange bias in ferromagnet/antiferromagnet bilayers
Authors:
X. P. Qiu,
D. Z. Yang,
S. M. Zhou,
R. Chantrell,
K O'Grady,
U Nowak,
J. Du,
X. J. Bai
Abstract:
For ferromagnet/antiferromagnet bilayers, rotation of the easy axis has been \textit{for the first time} observed during measurements of training effect and the recovery of exchange bias using FeNi/FeMn system. These salient phenomena strongly suggest irreversible motion of antiferromagnet spins during subsequent measurements of hysteresis loops. It is found that the rotation of the easy axis ca…
▽ More
For ferromagnet/antiferromagnet bilayers, rotation of the easy axis has been \textit{for the first time} observed during measurements of training effect and the recovery of exchange bias using FeNi/FeMn system. These salient phenomena strongly suggest irreversible motion of antiferromagnet spins during subsequent measurements of hysteresis loops. It is found that the rotation of the easy axis can partly account for the training effect and the recovery of the exchange bias.
△ Less
Submitted 13 October, 2007;
originally announced October 2007.
-
Temperature dependent magnetic properties of FePt: effective spin Hamiltonian model
Authors:
O. N. Mryasov,
U. Nowak,
K. Y. Guslienko,
R. W. Chantrell
Abstract:
A model of magnetic interactions in the ordered ferromagnetic FePt is proposed on the basis of first-principles calculations of non-collinear magnetic configurations and shown to be capable of explaining recent measurements of magnetic anisotropy energy (MAE). The site (Fe,Pt) resolved contributions to the MAE have been distinguished with small Fe easy-plane and large Pt easy-axis terms. This mo…
▽ More
A model of magnetic interactions in the ordered ferromagnetic FePt is proposed on the basis of first-principles calculations of non-collinear magnetic configurations and shown to be capable of explaining recent measurements of magnetic anisotropy energy (MAE). The site (Fe,Pt) resolved contributions to the MAE have been distinguished with small Fe easy-plane and large Pt easy-axis terms. This model has been tested against available experimental data on the temperature dependence of MAE showing scaling of uniaxial MAE (K$_{1}$(T)) with magnetization (M(T)) $K_{1}(T) \sim M(T)^γ$ characterized by the unusual exponent of $γ= 2.1$. It is shown that this unusual behavior of the FePt can be quantitatively explained within the proposed model and originates from an effective anisotropic exchange mediated by the induced Pt moment. The latter is expected to be a common feature of 3d-5d(4d) alloys having 5d/4d elements with large spin-orbit coupling and exchange enhanced Stoner susceptibility.
△ Less
Submitted 2 November, 2004;
originally announced November 2004.
