-
Particle Identification at VAMOS++ with Machine Learning Techniques
Authors:
Y. Cho,
Y. H. Kim,
S. Choi,
J. Park,
S. Bae,
K. I. Hahn,
Y. Son,
A. Navin,
A. Lemasson,
M. Rejmund,
D. Ramos,
D. Ackermann,
A. Utepov,
C. Fourgeres,
J. C. Thomas,
J. Goupil,
G. Fremont,
G. de France,
Y. X. Watanabe,
Y. Hirayama,
S. Jeong,
T. Niwase,
H. Miyatake,
P. Schury,
M. Rosenbusch
, et al. (23 additional authors not shown)
Abstract:
Multi-nucleon transfer reaction between 136Xe beam and 198Pt target was performed using the VAMOS++ spectrometer at GANIL to study the structure of n-rich nuclei around N=126. Unambiguous charge state identification was obtained by combining two supervised machine learning methods, deep neural network (DNN) and positional correction using a gradient-boosting decision tree (GBDT). The new method re…
▽ More
Multi-nucleon transfer reaction between 136Xe beam and 198Pt target was performed using the VAMOS++ spectrometer at GANIL to study the structure of n-rich nuclei around N=126. Unambiguous charge state identification was obtained by combining two supervised machine learning methods, deep neural network (DNN) and positional correction using a gradient-boosting decision tree (GBDT). The new method reduced the complexity of the kinetic energy calibration and outperformed the conventional method, improving the charge state resolution by 8%
△ Less
Submitted 14 November, 2023; v1 submitted 13 November, 2023;
originally announced November 2023.
-
Silicon tracker array for RIB experiments at SAMURAI
Authors:
A. I. Stefanescu,
V. Panin,
L. Trache,
T. Motobayashi,
H. Otsu,
A. Saastamoinen,
T. Uesaka,
L. Stuhl,
J. Tanaka,
D. Tudor,
I. C. Stefanescu,
A. E. Spiridon,
K. Yoneda,
H. Baba,
M. Kurokawa,
Y. Togano,
Z. Halasz,
M. Sasano,
S. Ota,
Y. Kubota,
D. S. Ahn,
T. Kobayashi,
Z. Elekes,
N. Fukuda,
H. Takeda
, et al. (27 additional authors not shown)
Abstract:
This work describes a silicon tracker system developed for experiments with proton-rich radioactive ion beams at the SAMURAI superconducting spectrometer of RIBF at RIKEN. The system is designed for accurate angular reconstruction and atomic number identification of relativistic heavy ions and protons which are simultaneously produced in reactions motivated by studies of proton capture reactions o…
▽ More
This work describes a silicon tracker system developed for experiments with proton-rich radioactive ion beams at the SAMURAI superconducting spectrometer of RIBF at RIKEN. The system is designed for accurate angular reconstruction and atomic number identification of relativistic heavy ions and protons which are simultaneously produced in reactions motivated by studies of proton capture reactions of interest for nuclear astrophysics. The technical characteristics of the tracking array are described in detail as are its performance in two pilot experiments. The physics justification for such a system is also presented.
△ Less
Submitted 13 July, 2023;
originally announced July 2023.
-
Restoring Original Signal From Pile-up Signal using Deep Learning
Authors:
C. H. Kim,
S. Ahn,
K. Y. Chae,
J. Hooker,
G. V. Rogachev
Abstract:
Pile-up signals are frequently produced in experimental physics. They create inaccurate physics data with high uncertainty and cause various problems. Therefore, the correction to pile-up signals is crucially required. In this study, we implemented a deep learning method to restore the original signals from the pile-up signals. We showed that a deep learning model could accurately reconstruct the…
▽ More
Pile-up signals are frequently produced in experimental physics. They create inaccurate physics data with high uncertainty and cause various problems. Therefore, the correction to pile-up signals is crucially required. In this study, we implemented a deep learning method to restore the original signals from the pile-up signals. We showed that a deep learning model could accurately reconstruct the original signal waveforms from the pile-up waveforms. By substituting the pile-up signals with the original signals predicted by the model, the energy and timing resolutions of the data are notably enhanced. The model implementation significantly improved the quality of the particle identification plot and particle tracks. This method is applicable to similar problems, such as separating multiple signals or correcting pile-up signals with other types of noises and backgrounds.
△ Less
Submitted 24 April, 2023;
originally announced April 2023.
-
STCF Conceptual Design Report: Volume 1 -- Physics & Detector
Authors:
M. Achasov,
X. C. Ai,
R. Aliberti,
L. P. An,
Q. An,
X. Z. Bai,
Y. Bai,
O. Bakina,
A. Barnyakov,
V. Blinov,
V. Bobrovnikov,
D. Bodrov,
A. Bogomyagkov,
A. Bondar,
I. Boyko,
Z. H. Bu,
F. M. Cai,
H. Cai,
J. J. Cao,
Q. H. Cao,
Z. Cao,
Q. Chang,
K. T. Chao,
D. Y. Chen,
H. Chen
, et al. (413 additional authors not shown)
Abstract:
The Super $τ$-Charm facility (STCF) is an electron-positron collider proposed by the Chinese particle physics community. It is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of $0.5\times 10^{35}{\rm cm}^{-2}{\rm s}^{-1}$ or higher. The STCF will produce a data sample about a factor of 100 larger than that by the present $τ$-Charm factory -- the BEPCII,…
▽ More
The Super $τ$-Charm facility (STCF) is an electron-positron collider proposed by the Chinese particle physics community. It is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of $0.5\times 10^{35}{\rm cm}^{-2}{\rm s}^{-1}$ or higher. The STCF will produce a data sample about a factor of 100 larger than that by the present $τ$-Charm factory -- the BEPCII, providing a unique platform for exploring the asymmetry of matter-antimatter (charge-parity violation), in-depth studies of the internal structure of hadrons and the nature of non-perturbative strong interactions, as well as searching for exotic hadrons and physics beyond the Standard Model. The STCF project in China is under development with an extensive R\&D program. This document presents the physics opportunities at the STCF, describes conceptual designs of the STCF detector system, and discusses future plans for detector R\&D and physics case studies.
△ Less
Submitted 5 October, 2023; v1 submitted 28 March, 2023;
originally announced March 2023.
-
Simultaneously realizing thermal and electromagnetic cloaking by multi-physical null medium
Authors:
Yichao Liu,
Xiaomin Ma,
Kun Chao,
Fei Sun,
Zihao Chen,
**yuan Shan,
Hanchuan Chen,
Gang Zhao,
Shaojie Chen
Abstract:
Simultaneously manipulating multiple physical fields plays an important role in the increasingly complex integrated systems, aerospace equipment, biochemical productions, etc. For on-chip systems with high integration level (e.g., electronic/photonic chips and radio-frequency/microwave circuits), where both electromagnetic information/energy transporting and heat dissipation/recovery need to be co…
▽ More
Simultaneously manipulating multiple physical fields plays an important role in the increasingly complex integrated systems, aerospace equipment, biochemical productions, etc. For on-chip systems with high integration level (e.g., electronic/photonic chips and radio-frequency/microwave circuits), where both electromagnetic information/energy transporting and heat dissipation/recovery need to be considered, the precise and efficient control of the propagation of electromagnetic waves and heat fluxes simultaneously is particularly important. In this study, we propose a graphical designing method based on thermal-electromagnetic null medium to simultaneously control the propagation of electromagnetic waves and thermal fields according to the pre-designed paths. A thermal-electromagnetic cloak, which can create a cloaking effect on both electromagnetic waves and thermal fields simultaneously, is designed by thermal-electromagnetic surface transformation and verified by both numerical simulations and experimental measurements. The thermal-electromagnetic surface transformation proposed in this study provides a new methodology for simultaneous controlling on electromagnetic and temperature fields, which can be used to realize a series of novel thermal-electromagnetic devices such as thermal-electromagnetic shifter, splitter, bender, multiplexer and mode converter. The designed thermal-electromagnetic cloak opens up new ways to create a concealed region where any object within it does not create any disturbance to the external electromagnetic waves and temperature fields simultaneously, which may have significant applications in improving thermal-electromagnetic compatibility problem, protecting of thermal-electromagnetic sensitive components, and improving efficiency of energy usage for complex on-chip systems.
△ Less
Submitted 1 January, 2023;
originally announced February 2023.
-
Active thermal metasurfaces for remote heating/cooling by mimicking negative thermal conductivity
Authors:
Yichao Liu,
Kun Chao,
Fei Sun,
Shaojie Chen,
Hongtao Dai,
Hanchuan Chen
Abstract:
Remote temperature control can be obtained by a long-focus thermal lens that can focus heat fluxes into a spot far away from the back surface of the lens and create a virtual thermal source/sink in the background material, around which the temperature field distribution can be remotely controlled by changing the parameters of the thermal lens. However, due to the lack of negative thermal conductiv…
▽ More
Remote temperature control can be obtained by a long-focus thermal lens that can focus heat fluxes into a spot far away from the back surface of the lens and create a virtual thermal source/sink in the background material, around which the temperature field distribution can be remotely controlled by changing the parameters of the thermal lens. However, due to the lack of negative thermal conductivity, the existing thermal lenses have extremely short focal lengths and cannot be used to remotely control the temperature field around the virtual thermal source/sink. In this study, we theoretically propose a general approach to equivalently realize negative thermal conductivity by elaborately distributed active thermal metasurface (ATMS), then use the proposed ATMS to implement a novel thermal lens with long focal length designed by transformation thermodynamics, and experimentally verify the performance of the designed long-focus thermal lens with measured focal length f=19.8mm for remote heating/cooling. The proposed method expands the scope of the thermal conductivity and open up new ways to realize unprecedented thermal effects with effective negative thermal conductivity, such as "thermal surface plasmon polaritons", thermal superlens, thermal tunneling effect, and thermal invisible gateway.
△ Less
Submitted 14 November, 2022;
originally announced November 2022.
-
Use of Bayesian Optimization to Understand the Structure of Nuclei
Authors:
J. Hooker,
J. Kovoor,
K. L. Jones,
R. Kanungo,
M. Alcorta,
J. Allen,
C. Andreoiu,
L. Atar,
D. W. Bardayan,
S. S. Bhattacharjee,
D. Blankstein,
C. Burbadge,
S. Burcher,
W. N. Catford,
S. Cha,
K. Chae,
D. Connolly,
B. Davids,
N. Esker,
F. H. Garcia,
S. Gillespie,
R. Ghimire,
A. Gula,
G. Hackman,
S. Hallam
, et al. (19 additional authors not shown)
Abstract:
Monte Carlo simulations are widely used in nuclear physics to model experimental systems. In cases where there are significant unknown quantities, such as energies of states, an iterative process of simulating and fitting is often required to describe experimental data. We describe a Bayesian approach to fitting experimental data, designed for data from a $^{12}$Be(d,p) reaction measurement, using…
▽ More
Monte Carlo simulations are widely used in nuclear physics to model experimental systems. In cases where there are significant unknown quantities, such as energies of states, an iterative process of simulating and fitting is often required to describe experimental data. We describe a Bayesian approach to fitting experimental data, designed for data from a $^{12}$Be(d,p) reaction measurement, using simulations made with GEANT4. Q-values from the $^{12}$C(d,p) reaction to well-known states in $^{13}$C are compared with simulations using BayesOpt. The energies of the states were not included in the simulation to reproduce the situation for $^{13}$Be where the states are poorly known. Both cases had low statistics and significant resolution broadening owing to large proton energy losses in the solid deuterium target. Excitation energies of the lowest three excited states in $^{13}$C were extracted to better than 90 keV, paving a way for extracting information on $^{13}$Be.
△ Less
Submitted 9 December, 2021;
originally announced December 2021.
-
Möbius Strip Microlasers: a Testbed for Non-Euclidean Photonics
Authors:
Yalei Song,
Yann Monceaux,
Stefan Bittner,
Kimhong Chao,
Héctor M. Reynoso de la Cruz,
Clément Lafargue,
Dominique Decanini,
Barbara Dietz,
Joseph Zyss,
Alain Grigis,
Xavier Checoury,
Melanie Lebental
Abstract:
We report on experiments with Möbius strip microlasers which were fabricated with high optical quality by direct laser writing. A Möbius strip, i.e., a band with a half twist, exhibits the fascinating property that it has a single nonorientable surface and a single boundary. We provide evidence that, in contrast to conventional ring or disk resonators, a Möbius strip cavity cannot sustain whisperi…
▽ More
We report on experiments with Möbius strip microlasers which were fabricated with high optical quality by direct laser writing. A Möbius strip, i.e., a band with a half twist, exhibits the fascinating property that it has a single nonorientable surface and a single boundary. We provide evidence that, in contrast to conventional ring or disk resonators, a Möbius strip cavity cannot sustain whispering gallery modes (WGM). Comparison between experiments and 3D finite difference time domain (FDTD) simulations reveals that the resonances are localized on periodic geodesics.
△ Less
Submitted 30 November, 2021; v1 submitted 24 November, 2020;
originally announced November 2020.
-
Applying Machine Learning to Crowd-sourced Data from Earthquake Detective
Authors:
Omkar Ranadive,
Suzan van der Lee,
Vivian Tang,
Kevin Chao
Abstract:
Dynamically triggered earthquakes and tremor generate two classes of weak seismic signals whose detection, identification, and authentication traditionally call for laborious analyses. Machine learning (ML) has grown in recent years to be a powerful efficiency-boosting tool in geophysical analyses, including the detection of specific signals in time series. However, detecting weak signals that are…
▽ More
Dynamically triggered earthquakes and tremor generate two classes of weak seismic signals whose detection, identification, and authentication traditionally call for laborious analyses. Machine learning (ML) has grown in recent years to be a powerful efficiency-boosting tool in geophysical analyses, including the detection of specific signals in time series. However, detecting weak signals that are buried in noise challenges ML algorithms, in part because ubiquitous training data is not always available. Under these circumstances, ML can be as ineffective as human experts are inefficient. At this intersection of effectiveness and efficiency, we leverage a third tool that has grown in popularity over the past decade: Citizen science. Citizen science project Earthquake Detective leverages the eyes and ears of volunteers to detect and classify weak signals in seismograms from potentially dynamically triggered (PDT) events. Here, we present the Earthquake Detective data set - A crowd-sourced set of labels on PDT earthquakes and tremor. We apply Machine Learning to classify these PDT seismic events and explore the challenges faced in segregating and classifying such weak signals. We confirm that with an image- and wavelet-based algorithm, machine learning can detect signals from small earthquakes. In addition, we report that our ML algorithm can also detect signals from PDT tremor, which has not been previously demonstrated. The citizen science data set of classifications and ML code are available online.
△ Less
Submitted 15 June, 2022; v1 submitted 4 November, 2020;
originally announced November 2020.
-
Magnetic skyrmion artificial synapse for neuromorphic computing
Authors:
Kyung Mee Song,
Jae-Seung Jeong,
Biao Pan,
Xichao Zhang,
**g Xia,
Sun Kyung Cha,
Tae-Eon Park,
Kwangsu Kim,
Simone Finizio,
Joerg Raabe,
Joonyeon Chang,
Yan Zhou,
Weisheng Zhao,
Wang Kang,
Hyunsu Ju,
Seonghoon Woo
Abstract:
Since the experimental discovery of magnetic skyrmions achieved one decade ago, there have been significant efforts to bring the virtual particles into all-electrical fully functional devices, inspired by their fascinating physical and topological properties suitable for future low-power electronics. Here, we experimentally demonstrate such a device: electrically-operating skyrmion-based artificia…
▽ More
Since the experimental discovery of magnetic skyrmions achieved one decade ago, there have been significant efforts to bring the virtual particles into all-electrical fully functional devices, inspired by their fascinating physical and topological properties suitable for future low-power electronics. Here, we experimentally demonstrate such a device: electrically-operating skyrmion-based artificial synaptic device designed for neuromorphic computing. We present that controlled current-induced creation, motion, detection and deletion of skyrmions in ferrimagnetic multilayers can be harnessed in a single device at room temperature to imitate the behaviors of biological synapses. Using simulations, we demonstrate that such skyrmion-based synapses could be used to perform neuromorphic pattern-recognition computing using handwritten recognition data set, reaching to the accuracy of ~89 percents, comparable to the software-based training accuracy of ~94 percents. Chip-level simulation then highlights the potential of skyrmion synapse compared to existing technologies. Our findings experimentally illustrate the basic concepts of skyrmion-based fully functional electronic devices while providing a new building block in the emerging field of spintronics-based bio-inspired computing.
△ Less
Submitted 30 September, 2019; v1 submitted 1 July, 2019;
originally announced July 2019.
-
On the optical properties of Ag^{+15} ion-beam irradiated TiO_{2} and SnO_{2} thin films
Authors:
Hardeep Thakur,
Sanjeev Gautam,
P. Thakur,
K. K. Sharma,
Abhinav Pratap Singh,
Yogesh Kumar,
Ravi Kumar,
Keun Hwa Chae
Abstract:
The effects of 200-MeV Ag^{+15} ion irradiation on the optical properties of TiO_{2} and SnO_{2} thin films prepared by using the RF magnetron sputtering technique were investigated. These films were characterized by using UV-vis spectroscopy, and with increasing irradiation fluence, the transmittance for the TiO_{2} films was observed to increase systematically while that for SnO_{2} was observed…
▽ More
The effects of 200-MeV Ag^{+15} ion irradiation on the optical properties of TiO_{2} and SnO_{2} thin films prepared by using the RF magnetron sputtering technique were investigated. These films were characterized by using UV-vis spectroscopy, and with increasing irradiation fluence, the transmittance for the TiO_{2} films was observed to increase systematically while that for SnO_{2} was observed to decrease. Absorption spectra of the irradiated samples showed minor changes in the indirect bandgap from 3.44 to 3.59 eV with increasing irradiation fluence for TiO_{2} while significant changes in the direct bandgap from 3.92 to 3.6 eV were observed for SnO_{2}. The observed modifications in the optical properties of both the TiO_{2} and the SnO_{2} systems with irradiation can be attributed to controlled structural disorder/defects in the system.
△ Less
Submitted 12 December, 2012; v1 submitted 10 December, 2011;
originally announced December 2011.
-
Electronic and magnetic structure of carbon nanotubes using x-ray absorption and magnetic circular dichroism spectroscopy
Authors:
Sanjeev Gautama,
P. Thakur,
S. Augustine,
J. K. Kang,
J. -Y. Kim,
N. B. Brookes,
K. Asokan,
Keun Hwa Chae
Abstract:
Carbon nanotubes are a fraction of the size of transistors used in today's best microchips, as it could reduce power demands and heating in next electronics revolution. Present study investigates the electronic and magnetic structure of multi walled carbon nanotubes (MWCNT) synthesized by chemical vapor deposition technique using near edge x-ray absorption spectroscopy (NEXAFS) measurement at C K-…
▽ More
Carbon nanotubes are a fraction of the size of transistors used in today's best microchips, as it could reduce power demands and heating in next electronics revolution. Present study investigates the electronic and magnetic structure of multi walled carbon nanotubes (MWCNT) synthesized by chemical vapor deposition technique using near edge x-ray absorption spectroscopy (NEXAFS) measurement at C K-edge and x-ray magnetic circular dichroism (XMCD) at Co and Fe $L_{3,2}$ -edges. NEXAFS at C K-edge shows significant $π$-bonding, and Fe(Co) L-edge proves the presence of Co$^{2+}$ and Fe$^{2+}$ in octahedral symmetry, and embedded in C-matrix of MWCNT. Element specific hystersis loops and XMCD spectra clearly shows that these MWCNTs exhibits room temperature ferromagnetism. These measurements elucidated the electronic structure of CNTs and presence of magnetic interactions at room temperature.
△ Less
Submitted 23 November, 2011;
originally announced November 2011.
-
Diaphragm as an anatomic surrogate for lung tumor motion
Authors:
Laura I. Cervino,
Alvin. K. Y. Chao,
Ajay Sandhu,
Steve B. Jiang
Abstract:
Lung tumor motion due to respiration poses a challenge in the application of modern three-dimensional conformal radiotherapy. Direct tracking of the lung tumor during radiation therapy is very difficult without implanted fiducial markers. Indirect tracking relies on the correlation of the tumor's motion and the surrogate's motion. The present paper presents an analysis of the correlation between…
▽ More
Lung tumor motion due to respiration poses a challenge in the application of modern three-dimensional conformal radiotherapy. Direct tracking of the lung tumor during radiation therapy is very difficult without implanted fiducial markers. Indirect tracking relies on the correlation of the tumor's motion and the surrogate's motion. The present paper presents an analysis of the correlation between the tumor motion and the diaphragm motion in order to evaluate the potential use of diaphragm as a surrogate for tumor motion. We have analyzed the correlation between diaphragm motion and superior-inferior lung tumor motion in 32 fluoroscopic image sequences from 10 lung cancer patients. A simple linear model and a more complex linear model that accounts for phase delays between the two motions have been used. Results show that the diaphragm is a good surrogate for tumor motion prediction for most patients, resulting in an average correlation factor of 0.94 and 0.98 with each model respectively. The model that accounts for delays leads to an average localization prediction error of 0.8mm and an error at the 95% confidence level of 2.1mm. However, for one patient studied, the correlation is much weaker compared to other patients. This indicates that, before using diaphragm for lung tumor prediction, the correlation should be examined on a patient-by-patient basis.
△ Less
Submitted 20 April, 2009;
originally announced April 2009.
