Showing 1–38 of 38 results for author: Cha, S

Pursuing equitable access to vaccines for the next epidemic

Authors: Hsin-Ju Chou, **g-Yuan Ko, Sung-Po Chao

Abstract: To mitigate the pandemic stemming from COVID-19, numerous nations have initiated extensive vaccination campaigns for their citizens since late 2020. While affluent countries have predominantly received vaccine allocations, fewer doses have been dispatched to nations with lower average incomes. This unequal distribution not only widens the disparity between wealthy and impoverished regions but also… ▽ More To mitigate the pandemic stemming from COVID-19, numerous nations have initiated extensive vaccination campaigns for their citizens since late 2020. While affluent countries have predominantly received vaccine allocations, fewer doses have been dispatched to nations with lower average incomes. This unequal distribution not only widens the disparity between wealthy and impoverished regions but also prolongs the pandemic, evident in the emergence of new viral variants. Our research delves into the correlation between the duration of the pandemic and the timing of vaccine distribution between two countries with migratory ties. By using a pair of coupled Susceptible- Infected-Recovered-Deceased (SIRD) models incorporating vaccination data, we demonstrate that timely sharing of vaccines benefits both nations, regardless of the presence of viral variants. This underscores that in the realm of vaccine distribution, self-interest and altruism are not mutually exclusive. △ Less

Submitted 28 March, 2024; v1 submitted 10 November, 2023; originally announced November 2023.

Comments: v.2: 14 pages, 7 sets of figures (English rephrasing, figures reploting, refrerence added)

Demonstration of chronometric leveling using transportable optical clocks beyond laser coherence limit

Authors: Yi Yuan, Kaifeng Cui, Daoxin Liu, **bo Yuan, Jian Cao, Dehao Wang, Sijia Chao, Hualin Shu, Xueren Haung

Abstract: Optical clock network requires the establishment of optical frequency transmission link between multiple optical clocks, utilizing narrow linewidth lasers. Despite achieving link noise levels of 10${^{-20}}$, the final accuracy is limited by the phase noise of the clock laser. Correlation spectroscopy is developed to transmit frequency information between two optical clocks directly, enabling opti… ▽ More Optical clock network requires the establishment of optical frequency transmission link between multiple optical clocks, utilizing narrow linewidth lasers. Despite achieving link noise levels of 10${^{-20}}$, the final accuracy is limited by the phase noise of the clock laser. Correlation spectroscopy is developed to transmit frequency information between two optical clocks directly, enabling optical clock comparison beyond the phase noise limit of clock lasers, and significantly enhancing the measurement accuracy or shorten the measurement time. In this letter, two compact transportable ${^{40}}$Ca${^+}$ clocks are employed to accomplish the correlation spectroscopy comparison, demonstrating an 10 cm level measurement accuracy of chronometric leveling using a mediocre clock laser with linewidth of 200 Hz. The relative frequency instability reaches $6.0\times10{^{-15}}/\sqrt{τ/s}$, which is about 20 times better than the result with Rabi spectroscopy using the same clock laser. This research greatly reduces the harsh requirements on the performance of the clock laser, so that an ordinary stable-laser can also be employed in the construction of optical clock network, which is essential for the field applications, especially for the chronometric leveling. △ Less

Submitted 12 October, 2023; originally announced October 2023.

Highly-Sensitive Resonance-Enhanced Organic Photodetectors for Shortwave Infrared Sensing

Authors: Hoang Mai Luong, Chokchai Kaiyasuan, Ahra Yi, Sangmin Chae, Brian Minki Kim, Patchareepond Panoy, Hyo Jung Kim, Vinich Promarak, Yasuo Miyata, Hidenori Nakayama, Thuc-Quyen Nguyen

Abstract: Shortwave infrared (SWIR) has various applications, including night vision, remote sensing, and medical imaging. SWIR organic photodetectors (OPDs) offer advantages such as flexibility, cost-effectiveness, and tunable properties, however, lower sensitivity and limited spectral coverage compared to inorganic counterparts are major drawbacks. Here, we propose a simple yet effective and widely applic… ▽ More Shortwave infrared (SWIR) has various applications, including night vision, remote sensing, and medical imaging. SWIR organic photodetectors (OPDs) offer advantages such as flexibility, cost-effectiveness, and tunable properties, however, lower sensitivity and limited spectral coverage compared to inorganic counterparts are major drawbacks. Here, we propose a simple yet effective and widely applicable strategy to extend the wavelength detection range of OPD to a longer wavelength, using resonant optical microcavity. We demonstrate a proof-of-concept in PTB7-Th:COTIC-4F blend system, achieving external quantum efficiency (EQE) > 50 % over a broad spectrum 450 - 1100 nm with a peak specific detectivity (D*) of 1.1E13 Jones at 1100 nm, while cut-off bandwidth, speed, and linearity are preserved. By employing a novel small-molecule acceptor IR6, a record high EQE = 35 % and D* = 4.1E12 Jones are obtained at 1150 nm. This research emphasizes the importance of optical design in optoelectronic devices, presenting a considerably simpler method to expand the photodetection range compared to a traditional approach that involves develo** absorbers with narrow optical gaps. △ Less

Submitted 13 September, 2023; originally announced September 2023.

In-plane anisotropy in biaxial ReS2 crystals probed by nano-optical imaging of waveguide modes

Authors: Fabian Mooshammer, Sanghoon Chae, Shuai Zhang, Yinming Shao, Siyuan Qiu, Anjaly Rajendran, Aaron J. Sternbach, Daniel J. Rizzo, Xiaoyang Zhu, P. James Schuck, James C. Hone, D. N. Basov

Abstract: Near-field imaging has emerged as a reliable probe of the dielectric function of van der Waals crystals. In principle, analyzing the propagation patterns of subwavelength waveguide modes (WMs) allows for extraction of the full dielectric tensor. Yet previous studies have mostly been restricted to high-symmetry materials or narrowband probing. Here, we resolve in-plane anisotropic WMs in thin rheni… ▽ More Near-field imaging has emerged as a reliable probe of the dielectric function of van der Waals crystals. In principle, analyzing the propagation patterns of subwavelength waveguide modes (WMs) allows for extraction of the full dielectric tensor. Yet previous studies have mostly been restricted to high-symmetry materials or narrowband probing. Here, we resolve in-plane anisotropic WMs in thin rhenium disulfide (ReS2) crystals across a wide range of near-infrared frequencies. By tracing the evolution of these modes as a function of crystallographic direction, polarization of the electric field and sample thickness, we have determined the anisotropic dielectric tensor including the elusive out-of-plane response. The excitonic absorption at ~1.5 eV manifests itself as a clear backbending feature in the WM dispersion and a reduction of the quality factors as fully supported by numerical calculations. Our results extend the sensitivity of near-field microscopy towards biaxial anisotropy and provide key insights into the optoelectronic properties of ReS2. △ Less

Submitted 6 February, 2023; originally announced February 2023.

Comments: This document is the Accepted Manuscript version of a Published Work that appeared in final form in ACS Photonics (copyright ©American Chemical Society) after peer review and technical editing by the publisher. To access the final edited and published work see https://pubs.acs.org/doi/10.1021/acsphotonics.1c01841

Journal ref: ACS Photonics 9, 443-451 (2022)

Gate-tunable quantum pathways of high harmonic generation in graphene

Authors: Soonyoung Cha, Minjeong Kim, Youngjae Kim, Shinyoung Choi, Sejong Kang, Hoon Kim, Sangho Yoon, Gunho Moon, Taeho Kim, Ye Won Lee, Gil Young Cho, Moon Jeong Park, Cheol-Joo Kim, B. J. Kim, JaeDong Lee, Moon-Ho Jo, Jonghwan Kim

Abstract: Under strong laser fields, electrons in solids radiate high-harmonic fields by travelling through quantum pathways in Bloch bands in the sub-laser-cycle timescales. Understanding these pathways in the momentum space through the high-harmonic radiation can enable an all-optical ultrafast probe to observe coherent lightwave-driven processes and measure electronic structures as recently demonstrated… ▽ More Under strong laser fields, electrons in solids radiate high-harmonic fields by travelling through quantum pathways in Bloch bands in the sub-laser-cycle timescales. Understanding these pathways in the momentum space through the high-harmonic radiation can enable an all-optical ultrafast probe to observe coherent lightwave-driven processes and measure electronic structures as recently demonstrated for semiconductors. However, such demonstration has been largely limited for semimetals because the absence of the bandgap hinders an experimental characterization of the exact pathways. In this study, by combining electrostatic control of chemical potentials with HHG measurement, we resolve quantum pathways of massless Dirac fermions in graphene under strong laser fields. Electrical modulation of HHG reveals quantum interference between the multi-photon interband excitation channels. As the light-matter interaction deviates beyond the perturbative regime, elliptically polarized laser fields efficiently drive massless Dirac fermions via an intricate coupling between the interband and intraband transitions, which is corroborated by our theoretical calculations. Our findings pave the way for strong-laser-field tomography of Dirac electrons in various quantum semimetals and their ultrafast electronics with a gate control. △ Less

Submitted 16 October, 2022; originally announced October 2022.

Comments: 33 pages, 4 figures, Soonyoung Cha and Minjeong Kim contributed equally to this work, To whom correspondence should be addressed: jonghwankim@postech

2D material platform for overcoming the amplitude-phase tradeoff in ring modulators

Authors: Ipshita Datta, Andres Gil-Molina, Sang Hoon Chae, James Hone, Michal Lipson

Abstract: Compact, high-speed electro-optic phase modulators play a vital role in various large-scale applications including phased arrays, quantum and neural networks, and optical communication links. Conventional phase modulators suffer from a fundamental tradeoff between device length and optical loss that limits their scaling capabilities. High-finesse ring resonators have been traditionally used as com… ▽ More Compact, high-speed electro-optic phase modulators play a vital role in various large-scale applications including phased arrays, quantum and neural networks, and optical communication links. Conventional phase modulators suffer from a fundamental tradeoff between device length and optical loss that limits their scaling capabilities. High-finesse ring resonators have been traditionally used as compact intensity modulators, but their use for phase modulation have been limited due to the high insertion loss associated with the phase change. Here, we show that high-finesse resonators can achieve a strong phase change with low insertion loss by simultaneous modulation of the real and imaginary parts of the refractive index, to the same extent i.e. $\frac{Δn}{Δk} \sim 1$. To implement this strategy, we utilize a hybrid platform that combines a low-loss SiN ring resonator with electro-absorptive graphene (Gr) and electro-refractive WSe$_2$. We achieve a phase modulation efficiency ($V_{\fracπ{2}} \cdot L_{\fracπ{2}}$) of 0.045 V $\cdot$ cm with an insertion loss (IL$_{\fracπ{2}}$) of 4.7 dB for a phase change of $\fracπ{2}$ radians, in a 25 $μ$m long Gr-Al$_2$O$_3$-WSe$_2$ capacitor embedded on a SiN ring of 50 $μ$m radius. We find that our Gr-Al$_2$O$_3$-WSe$_2$ capacitor can support an electro-optic bandwidth of 14.9 $\pm$ 0.1 GHz. We further show that the $V_{\fracπ{2}} \cdot L_{\fracπ{2}}$ of our SiN-2D platform is at least an order of magnitude lower than that of electro-optic phase modulators based on silicon, III-V on silicon, graphene on silicon and lithium niobate. This SiN-2D hybrid platform provides the impetus to design compact and high-speed reconfigurable circuits with graphene and transition metal dichalcogenide (TMD) monolayers that can enable large-scale photonic systems. △ Less

Submitted 1 December, 2022; v1 submitted 17 September, 2022; originally announced September 2022.

Calculation of magnetic forces and torques on the Kibble coil

Authors: Stephan Schlamminger, Lorenz Keck, Frank Seifert, Leon S. Chao, Darine Haddad, Shisong Li

Abstract: Analytically the forces and torques on a coil in a field of magnetic flux density can be calculated one of two ways. The line integral can be conducted along the coil's wire, summing up the differential force contribution. For each differential line segment, the force is obtained as a cross product with the magnetic flux density. Alternatively, the coil's energy in the field is the current times t… ▽ More Analytically the forces and torques on a coil in a field of magnetic flux density can be calculated one of two ways. The line integral can be conducted along the coil's wire, summing up the differential force contribution. For each differential line segment, the force is obtained as a cross product with the magnetic flux density. Alternatively, the coil's energy in the field is the current times the flux threading the coil. Hence, the energy is obtained by executing a surface integral over the coil's open surface. Here, a dot product of the differential surface element with the magnetic flux density is executed under the integral sign. The forces and torques can then be obtained from the negative derivative of the energy with respect to the appropriate coordinate. For yoke-based Kibble balances, the latter method is much simpler since most of the flux is contained in the inner yoke of the magnet and can be written as a simple equation. Here, we use this method to provide simple equations and their results for finding the torques and forces that act on a coil in a yoke-based magnet system. We further introduce a simple method that allows the calculation of the position and orientation difference between the coil and the magnet from three measurements. △ Less

Submitted 19 September, 2022; v1 submitted 25 August, 2022; originally announced August 2022.

Comments: 16 pages, 15 figures, accepted for publication by Metrologia

Atomically imprinted graphene plasmonic cavities

Authors: Brian S. Y. Kim, Aaron J. Sternbach, Min Sup Choi, Zhiyuan Sun, Francesco L. Ruta, Yinming Shao, Alexander S. McLeod, Lin Xiong, Yinan Dong, Anjaly Rajendran, Song Liu, Ankur Nipane, Sang Hoon Chae, Amirali Zangiabadi, Xiaodong Xu, Andrew J. Millis, P. James Schuck, Cory. R. Dean, James C. Hone, D. N. Basov

Abstract: Plasmon polaritons in van der Waals (vdW) materials hold promise for next-generation photonics. The ability to deterministically imprint spatial patterns of high carrier density in cavities and circuitry with nanoscale features underlies future progress in nonlinear nanophotonics and strong light-matter interactions. Here, we demonstrate a general strategy to atomically imprint low-loss graphene p… ▽ More Plasmon polaritons in van der Waals (vdW) materials hold promise for next-generation photonics. The ability to deterministically imprint spatial patterns of high carrier density in cavities and circuitry with nanoscale features underlies future progress in nonlinear nanophotonics and strong light-matter interactions. Here, we demonstrate a general strategy to atomically imprint low-loss graphene plasmonic structures using oxidation-activated charge transfer (OCT). We cover graphene with a monolayer of WSe$_2$, which is subsequently oxidized into high work-function WOx to activate charge transfer. Nano-infrared imaging reveals low-loss plasmon polaritons at the WOx/graphene interface. We insert WSe$_2$ spacers to precisely control the OCT-induced carrier density and achieve a near-intrinsic quality factor of plasmons. Finally, we imprint canonical plasmonic cavities exhibiting laterally abrupt do** profiles with single-digit nanoscale precision via programmable OCT. Specifically, we demonstrate technologically appealing but elusive plasmonic whispering-gallery resonators based on free-standing graphene encapsulated in WOx. Our results open avenues for novel quantum photonic architectures incorporating two-dimensional materials. △ Less

Submitted 25 June, 2022; originally announced June 2022.

Comments: 17 pages, 4 figures

Infrared Plasmons Propagate through a Hyperbolic Nodal Metal

Authors: Yinming Shao, Aaron J. Sternbach, Brian S. Y. Kim, Andrey A. Rikhter, Xinyi Xu, Umberto De Giovannini, Ran **g, Sang Hoon Chae, Zhiyuan Sun, Seng Huat Lee, Yanglin Zhu, Zhiqiang Mao, J. Hone, Raquel Queiroz, A. J. Millis, P. James Schuck, A. Rubio, M. M. Fogler, D. N. Basov

Abstract: Metals are canonical plasmonic media at infrared and optical wavelengths, allowing one to guide and manipulate light at the nano-scale. A special form of optical waveguiding is afforded by highly anisotropic crystals revealing the opposite signs of the dielectric functions along orthogonal directions. These media are classified as hyperbolic and include crystalline insulators, semiconductors and a… ▽ More Metals are canonical plasmonic media at infrared and optical wavelengths, allowing one to guide and manipulate light at the nano-scale. A special form of optical waveguiding is afforded by highly anisotropic crystals revealing the opposite signs of the dielectric functions along orthogonal directions. These media are classified as hyperbolic and include crystalline insulators, semiconductors and artificial metamaterials. Layered anisotropic metals are also anticipated to support hyperbolic waveguiding. Yet this behavior remains elusive, primarily because interband losses arrest the propagation of infrared modes. Here, we report on the observation of propagating hyperbolic waves in a prototypical layered nodal-line semimetal ZrSiSe. The observed waveguiding originates from polaritonic hybridization between near-infrared light and nodal-line plasmons. Unique nodal electronic structures simultaneously suppress interband loss and boost the plasmonic response, ultimately enabling the propagation of infrared modes through the bulk of the crystal. △ Less

Submitted 3 June, 2022; originally announced June 2022.

Journal ref: Sci. Adv. 8, eadd6169 (2022)

Unzip** hBN with ultrashort mid-infrared pulses

Authors: Cecilia Y. Chen, Jared S. Ginsberg, Samuel L. Moore, M. Mehdi Jadidi, Rishi Maiti, Baichang Li, Sang Hoon Chae, Anjaly Rajendran, Gauri N. Patwardhan, Kenji Watanabe, Takashi Taniguchi, James Hone, D. N. Basov, Alexander L. Gaeta

Abstract: Manipulating the nanostructure of materials is critical for numerous applications in electronics, magnetics, and photonics. However, conventional methods such as lithography and laser-writing require cleanroom facilities or leave residue. Here, we describe a new approach to create atomically sharp line defects in hexagonal boron nitride (hBN) at room temperature by direct optical phonon excitation… ▽ More Manipulating the nanostructure of materials is critical for numerous applications in electronics, magnetics, and photonics. However, conventional methods such as lithography and laser-writing require cleanroom facilities or leave residue. Here, we describe a new approach to create atomically sharp line defects in hexagonal boron nitride (hBN) at room temperature by direct optical phonon excitation in the mid-infrared (mid-IR). We term this phenomenon "unzip**" to describe the rapid formation and growth of a <30-nm-wide crack from a point within the laser-driven region. The formation of these features is attributed to large atomic displacements and high local bond strain from driving the crystal at a natural resonance. This process is distinguished by (i) occurring only under resonant phonon excitation, (ii) producing highly sub-wavelength features, and (iii) sensitivity to crystal orientation and pump laser polarization. Its cleanliness, directionality, and sharpness enable applications in in-situ flake cleaving and phonon-wave-coupling via free space optical excitation. △ Less

Submitted 24 May, 2022; originally announced May 2022.

Comments: 11 pages, 4 figures

Use of Bayesian Optimization to Understand the Structure of Nuclei

Authors: J. Hooker, J. Kovoor, K. L. Jones, R. Kanungo, M. Alcorta, J. Allen, C. Andreoiu, L. Atar, D. W. Bardayan, S. S. Bhattacharjee, D. Blankstein, C. Burbadge, S. Burcher, W. N. Catford, S. Cha, K. Chae, D. Connolly, B. Davids, N. Esker, F. H. Garcia, S. Gillespie, R. Ghimire, A. Gula, G. Hackman, S. Hallam , et al. (19 additional authors not shown)

Abstract: Monte Carlo simulations are widely used in nuclear physics to model experimental systems. In cases where there are significant unknown quantities, such as energies of states, an iterative process of simulating and fitting is often required to describe experimental data. We describe a Bayesian approach to fitting experimental data, designed for data from a $^{12}$Be(d,p) reaction measurement, using… ▽ More Monte Carlo simulations are widely used in nuclear physics to model experimental systems. In cases where there are significant unknown quantities, such as energies of states, an iterative process of simulating and fitting is often required to describe experimental data. We describe a Bayesian approach to fitting experimental data, designed for data from a $^{12}$Be(d,p) reaction measurement, using simulations made with GEANT4. Q-values from the $^{12}$C(d,p) reaction to well-known states in $^{13}$C are compared with simulations using BayesOpt. The energies of the states were not included in the simulation to reproduce the situation for $^{13}$Be where the states are poorly known. Both cases had low statistics and significant resolution broadening owing to large proton energy losses in the solid deuterium target. Excitation energies of the lowest three excited states in $^{13}$C were extracted to better than 90 keV, paving a way for extracting information on $^{13}$Be. △ Less

Submitted 9 December, 2021; originally announced December 2021.

Comments: 8 pages, 6 figures

Phonon-Enhanced Nonlinearities in Hexagonal Boron Nitride

Authors: Jared S. Ginsberg, M. Mehdi Jadidi, ** Zhang, Cecilia Y. Chen, Nicolas Tancogne-Dejean, Sang Hoon Chae, Gauri N. Patwardhan, Lede Xian, Kenji Watanabe, Takashi Taniguchi, James Hone, Angel Rubio, Alexander L. Gaeta

Abstract: We investigate optical nonlinearities that are induced and enhanced due to the strong phonon resonance in hexagonal boron nitride. We predict and observe large sub-picosecond duration signals due to four-wave mixing (FWM) during resonant excitation. The resulting FWM signal allows for time-resolved observation of the crystal motion. In addition, we observe enhancements of third-harmonic generation… ▽ More We investigate optical nonlinearities that are induced and enhanced due to the strong phonon resonance in hexagonal boron nitride. We predict and observe large sub-picosecond duration signals due to four-wave mixing (FWM) during resonant excitation. The resulting FWM signal allows for time-resolved observation of the crystal motion. In addition, we observe enhancements of third-harmonic generation with resonant pum** at the hBN transverse optical phonon. Phonon-induced nonlinear enhancements are also predicted to yield large increases in high-harmonic efficiencies. △ Less

Submitted 17 July, 2023; v1 submitted 26 July, 2021; originally announced July 2021.

Comments: 9 pages, 5 figures

Evaluation of the systematic shifts of a ${}^{40}\textrm{Ca}^+-{}^{27}\textrm{Al}^+$ optical clock

Authors: Kaifeng Cui, Sijia Chao, Chenglong Sun, Shaomao Wang, ** Zhang, Yuanfei Wei, **bo Yuan, Jian Cao, Hualin Shu, Xueren Huang

Abstract: Quantum-logic-based ${}^{27}\textrm{Al}^+$ optical clock has been demonstrated in several schemes as there are different choices of the auxiliary ion species. In this paper, we present the first detailed evaluation of the systematic shift and the total uncertainty of an ${}^{27}\textrm{Al}^+$ optical clock sympathetically cooled by a ${}^{40}\textrm{Ca}^+$ ion. The total systematic uncertainty of… ▽ More Quantum-logic-based ${}^{27}\textrm{Al}^+$ optical clock has been demonstrated in several schemes as there are different choices of the auxiliary ion species. In this paper, we present the first detailed evaluation of the systematic shift and the total uncertainty of an ${}^{27}\textrm{Al}^+$ optical clock sympathetically cooled by a ${}^{40}\textrm{Ca}^+$ ion. The total systematic uncertainty of the ${}^{40}\textrm{Ca}^+ - {}^{27}\textrm{Al}^+$ quantum logic clock has been estimated to be $7.9 \times 10^{-18}$, which was mainly limited by the uncertainty of the quadratic Zeeman shift. By comparing the frequency of two counter-propagating clock beams on the same ion, we measured the frequency stability to be $3.7 \times 10^{-14} /\sqrtτ$. △ Less

Submitted 4 August, 2022; v1 submitted 10 December, 2020; originally announced December 2020.

Comments: 8 pages, 3 figures, 3 tables

Journal ref: Eur. Phys. J. D 76, 140 (2022)

Simplified model on the timing of easing the lockdown

Authors: Sung-Po Chao

Abstract: Lockdown procedures have been proven successful in mitigating the spread of the viruses in this COVID-19 pandemic, but they also have devastating impact on the economy. We use a modified Susceptible-Infectious-Recovered-Deceased model with time dependent infection rate to simulate how the infection is spread under lockdown. The economic cost due to the loss of workforce and incurred medical expens… ▽ More Lockdown procedures have been proven successful in mitigating the spread of the viruses in this COVID-19 pandemic, but they also have devastating impact on the economy. We use a modified Susceptible-Infectious-Recovered-Deceased model with time dependent infection rate to simulate how the infection is spread under lockdown. The economic cost due to the loss of workforce and incurred medical expenses is evaluated with a simple model. We find the best strategy, meaning the smallest economic cost for the entire course of the pandemic, is to keep the strict lockdown as long as possible. △ Less

Submitted 17 September, 2020; v1 submitted 28 July, 2020; originally announced July 2020.

Comments: 10 pages, 10 figures

Estimation of Infection Rate and Prediction of Initial Infected Individuals of COVID-19

Authors: Seo Yoon Chae, Kyoung-Eun Lee, Hyun Min Lee, Nam Jun, Quang Ahn Le, Biseko Juma Mafwele, Tae Ho Lee, Doo Hwan Kim, Jae Woo Lee

Abstract: We consider the pandemic spreading of COVID-19 for some selected countries after the outbreak of the coronavirus in Wuhan City, China. We estimated the infection rate and the initial infected individuals of COVID-19 by using the officially reported data at the early stage of the epidemic for the susceptible (S), infectable (I), quarantined (Q), and the cofirmed recovered (Rk) population model, so… ▽ More We consider the pandemic spreading of COVID-19 for some selected countries after the outbreak of the coronavirus in Wuhan City, China. We estimated the infection rate and the initial infected individuals of COVID-19 by using the officially reported data at the early stage of the epidemic for the susceptible (S), infectable (I), quarantined (Q), and the cofirmed recovered (Rk) population model, so called SIQRk model. In the reported data we know the quarantined cases and the recovered cases. We can not know the recovered cases from the asymptomatic cases. In the SIQRk model we can estimated the model parameters and the initial infecting cases (confirmed ans asymtomatic cases) from the data fits. We obtained the infection rate in the range between 0.233 and 0.462, the basic reproduction number Ro in the range between 1.8 and 3.5, and the initial number of infected individuals in the range betwee 10 and 8409 for some selected countries. By using fitting parameters we estimated the maximum time of the infection for Germany when the government are performing the quarantine policy. The disease is undergoing to the calm state about six months after first patients were identified. △ Less

Submitted 27 April, 2020; originally announced April 2020.

Comments: 12 pages, 2 figures

Magnet system for the Quantum Electro-Mechanical Metrology Suite

Authors: Rafael R. Marangoni, Darine Haddad, Frank Seifert, Leon S. Chao, David B. Newell, Stephan Schlamminger

Abstract: The design of the permanent magnet system for the new Quantum Electro-Mechanical Metrology Suite (QEMMS) is described. The QEMMS, developed at the National Institute of Standards and Technology (NIST), consists of a Kibble balance, a programmable Josephson voltage standard, and a quantum Hall resistance standard. It will be used to measure masses up to $100\,\mathrm{g}$ with relative uncertainties… ▽ More The design of the permanent magnet system for the new Quantum Electro-Mechanical Metrology Suite (QEMMS) is described. The QEMMS, developed at the National Institute of Standards and Technology (NIST), consists of a Kibble balance, a programmable Josephson voltage standard, and a quantum Hall resistance standard. It will be used to measure masses up to $100\,\mathrm{g}$ with relative uncertainties below $2\times 10^{-8}$. The magnet system is based on the design of the NIST-4 magnet system with significant changes to adopt to a smaller Kibble balance and to overcome known practical limitations. Analytical models are provided to describe the coil-current effect and model the forces required to split the magnet in two parts to install the coil. Both models are compared to simulation results obtained with finite element analysis and measurement results. Other aspects, such as the coil design and flatness of $Bl$ profile are considered. △ Less

Submitted 26 December, 2019; v1 submitted 10 December, 2019; originally announced December 2019.

Comments: 9 pages, 12 figures, published in IEEE Trans. Instrum. Meas

Magnetic skyrmion artificial synapse for neuromorphic computing

Authors: Kyung Mee Song, Jae-Seung Jeong, Biao Pan, Xichao Zhang, **g Xia, Sun Kyung Cha, Tae-Eon Park, Kwangsu Kim, Simone Finizio, Joerg Raabe, Joonyeon Chang, Yan Zhou, Weisheng Zhao, Wang Kang, Hyunsu Ju, Seonghoon Woo

Abstract: Since the experimental discovery of magnetic skyrmions achieved one decade ago, there have been significant efforts to bring the virtual particles into all-electrical fully functional devices, inspired by their fascinating physical and topological properties suitable for future low-power electronics. Here, we experimentally demonstrate such a device: electrically-operating skyrmion-based artificia… ▽ More Since the experimental discovery of magnetic skyrmions achieved one decade ago, there have been significant efforts to bring the virtual particles into all-electrical fully functional devices, inspired by their fascinating physical and topological properties suitable for future low-power electronics. Here, we experimentally demonstrate such a device: electrically-operating skyrmion-based artificial synaptic device designed for neuromorphic computing. We present that controlled current-induced creation, motion, detection and deletion of skyrmions in ferrimagnetic multilayers can be harnessed in a single device at room temperature to imitate the behaviors of biological synapses. Using simulations, we demonstrate that such skyrmion-based synapses could be used to perform neuromorphic pattern-recognition computing using handwritten recognition data set, reaching to the accuracy of ~89 percents, comparable to the software-based training accuracy of ~94 percents. Chip-level simulation then highlights the potential of skyrmion synapse compared to existing technologies. Our findings experimentally illustrate the basic concepts of skyrmion-based fully functional electronic devices while providing a new building block in the emerging field of spintronics-based bio-inspired computing. △ Less

Submitted 30 September, 2019; v1 submitted 1 July, 2019; originally announced July 2019.

Comments: 11 pages, 4 figures

Journal ref: Nature Electronics 3, 148 (2020)

Low-loss composite photonic platform based on 2D semiconductor monolayers

Authors: Ipshita Datta, Sang Hoon Chae, Gaurang R. Bhatt, Mohammad A. Tadayon, Baichang Li, Yiling Yu, Chibeom Park, Jiwoong Park, Linyou Cao, D. N. Basov, James Hone, Michal Lipson

Abstract: Two dimensional materials such as graphene and transition metal dichalcogenides (TMDs) are promising for optical modulation, detection, and light emission since their material properties can be tuned on-demand via electrostatic do**. The optical properties of TMDs have been shown to change drastically with do** in the wavelength range near the excitonic resonances. However, little is known abo… ▽ More Two dimensional materials such as graphene and transition metal dichalcogenides (TMDs) are promising for optical modulation, detection, and light emission since their material properties can be tuned on-demand via electrostatic do**. The optical properties of TMDs have been shown to change drastically with do** in the wavelength range near the excitonic resonances. However, little is known about the effect of do** on the optical properties of TMDs away from these resonances, where the material is transparent and therefore could be leveraged in photonic circuits. Here, we probe the electro-optic response of monolayer TMDs at near infrared (NIR) wavelengths (i.e. deep in the transparency regime), by integrating them on silicon nitride (SiN) photonic structures to induce strong light$-$matter interaction with the monolayer. We dope the monolayer to carrier densities of ($7.2 \pm 0.8$) $\times$ $10^{13} \textrm{cm}^{-2}$, by electrically gating the TMD using an ionic liquid. We show strong electro-refractive response in monolayer tungsten disulphide (WS$_2$) at NIR wavelengths by measuring a large change in the real part of refractive index $Δ$n = $0.53$, with only a minimal change in the imaginary part $Δ$k = $0.004$. The do** induced phase change ($Δ$n), compared to the induced absorption ($Δ$k) measured for WS$_2$ ($Δ$n/$Δ$k $\sim 125$), a key metric for photonics, is an order of magnitude higher than the $Δ$n/$Δ$k for bulk materials like silicon ($Δ$n/$Δ$k $\sim 10$), making it ideal for various photonic applications. We further utilize this strong tunable effect to demonstrate an electrostatically gated SiN-WS$_2$ phase modulator using a WS$_2$-HfO$_2$ (Hafnia)-ITO (Indium Tin Oxide) capacitive configuration, that achieves a phase modulation efficiency (V$_π$L) of 0.8 V $\cdot$ cm with a RC limited bandwidth of 0.3 GHz. △ Less

Submitted 2 June, 2019; originally announced June 2019.

A pseudo-capacitive chalcogenide-based electrode with dense 1-dimensional nanoarrays for enhanced energy density in asymmetric supercapacitors

Authors: Young-Woo Lee, Byung-Sung Kima, Jong Hong, Juwon Lee, Sangyeon Pak, Hyeon-Sik Jang, Dongmok Whang, SeungNam Cha, Jung Inn Sohn, Jong Min Kim

Abstract: To achieve the further development of supercapacitors (SCs), which have intensively received attention as a next-generation energy storage system, the rational design of active electrode materials with electrochemically more favorable structure is one of the most important factors to improve the SC performance with high specific energy and power density. We propose and successfully grow copper sul… ▽ More To achieve the further development of supercapacitors (SCs), which have intensively received attention as a next-generation energy storage system, the rational design of active electrode materials with electrochemically more favorable structure is one of the most important factors to improve the SC performance with high specific energy and power density. We propose and successfully grow copper sulfide (CuS) nanowires (NWs) as a chalcogenide-based electrode material directly on a Cu mesh current collector using the combination of a facile liquid-solid chemical oxidation process and an anion exchange reaction. We found that the as-prepared CuS NWs have well-arrayed structures with nanosized crystal grains, a high aspect ratio and density, as well as a good mechanical and electrical contact to the Cu mesh. The obtained CuS NW based electrodes, with additional binder- and conductive material-free, exhibit a much higher areal capacitance of 378.0 mF/cm2 and excellent cyclability of an approximately 90.2 percentage retention during 2000 charge/discharge cycles due to their unique structural, electrical, and electrochemical properties. Furthermore, for practical SC applications, an asymmetric supercapacitor is fabricated using active carbon as an anode and CuS NWs as a cathode, and exhibits the good capacitance retention of 91% during 2000 charge/discharge processes and the excellent volumetric energy density of 1.11 mW h/cm3 compared to other reported pseudo-capacitive SCs. △ Less

Submitted 15 May, 2019; originally announced May 2019.

Comments: 18 pages, 4 figures

Measurement of the Planck constant at the National Institute of Standards and Technology from 2015 to 2017

Authors: D. Haddad, F. Seifert, L. S. Chao, A. Possolo, D. B. Newell, J. R. Pratt, C. J. Williams, S. Schlamminger

Abstract: Researchers at the National Institute of Standards and Technology(NIST) have measured the value of the Planck constant to be $h =6.626\,069\,934(89)\times 10^{-34}\,$J$\,$s (relative standard uncertainty $13\times 10^{-9}$). The result is based on over 10$\,$000 weighings of masses with nominal values ranging from 0.5$\,$kg to 2$\,$kg with the Kibble balance NIST-4. The uncertainty has been reduce… ▽ More Researchers at the National Institute of Standards and Technology(NIST) have measured the value of the Planck constant to be $h =6.626\,069\,934(89)\times 10^{-34}\,$J$\,$s (relative standard uncertainty $13\times 10^{-9}$). The result is based on over 10$\,$000 weighings of masses with nominal values ranging from 0.5$\,$kg to 2$\,$kg with the Kibble balance NIST-4. The uncertainty has been reduced by more than twofold relative to a previous determination because of three factors: (1) a much larger data set than previously available, allowing a more realistic, and smaller, Type A evaluation; (2) a more comprehensive measurement of the back action of the weighing current on the magnet by weighing masses up to 2$\,$kg, decreasing the uncertainty associated with magnet non-linearity; (3) a rigorous investigation of the dependence of the geometric factor on the coil velocity reducing the uncertainty assigned to time-dependent leakage of current in the coil. △ Less

Submitted 8 August, 2017; originally announced August 2017.

Comments: 11 pages 5 figures, published in metrologia

Journal ref: Metrologia 54 (2017) 633-641; http://iopscience.iop.org/article/10.1088/1681-7575/aa7bf2

Evaluation of blackbody radiation shift with temperature associated fractional uncertainty at 10E-18 level for 40Ca+ ion optical clock

Authors: ** Zhang, Jian Cao, Hua-lin Shu, **-bo Yuan, Juan-juan Shang, Kai-feng Cui, Si-jia Chao, Shao-mao Wang, Dao-xin Liu, Xue-ren Huang

Abstract: In this paper, blackbody radiation (BBR) temperature rise seen by the $^{40}$Ca$^+$ ion confined in a miniature Paul trap and its uncertainty have been evaluated via finite-element method (FEM) modelling. The FEM model was validated by comparing with thermal camera measurements, which were calibrated by PT1000 resistance thermometer, at several points on a dummy trap. The input modelling parameter… ▽ More In this paper, blackbody radiation (BBR) temperature rise seen by the $^{40}$Ca$^+$ ion confined in a miniature Paul trap and its uncertainty have been evaluated via finite-element method (FEM) modelling. The FEM model was validated by comparing with thermal camera measurements, which were calibrated by PT1000 resistance thermometer, at several points on a dummy trap. The input modelling parameters were analyzed carefully in detail, and their contributions to the uncertainty of environment temperature were evaluated on the validated FEM model. The result shows that the temperature rise seen by $^{40}$Ca$^+$ ion is 1.72 K with an uncertainty of 0.46 K. It results in a contribution of 2.2 mHz to the systematic uncertainty of $^{40}$Ca$^+$ ion optical clock, corresponding to a fractional uncertainty 5.4$\times$10$^{-18}$. This is much smaller than the uncertainty caused by the BBR shift coefficient, which is evaluated to be 4.8 mHz and at 10$^{-17}$ level in fractional frequency units. △ Less

Submitted 17 September, 2016; originally announced September 2016.

Comments: Submitted to Journal of Physics B

Journal ref: J. Phys. B 50 015002 (2017)

A transportable 40Ca+ single-ion clock with $7.7\times 10^{-17}$ systematic uncertainty

Authors: Jian Cao, ** Zhang, Junjuan Shang, Kaifeng Cui, **bo Yuan, Sijia Chao, Shaomao Wang, Hualin Shu, Xueren Huang

Abstract: A transportable optical clock refer to the $4s^2S_{1/2}-3d^2D_{5/2}$ electric quadrupole transition at 729 nm of single $^{40}Ca^+$ trapped in mini Paul trap has been developed. The physical system of $^{40}Ca^+$ optical clock is re-engineered from a bulky and complex setup to an integration of two subsystems: a compact single ion unit including ion trap** and detection modules, and a compact la… ▽ More A transportable optical clock refer to the $4s^2S_{1/2}-3d^2D_{5/2}$ electric quadrupole transition at 729 nm of single $^{40}Ca^+$ trapped in mini Paul trap has been developed. The physical system of $^{40}Ca^+$ optical clock is re-engineered from a bulky and complex setup to an integration of two subsystems: a compact single ion unit including ion trap** and detection modules, and a compact laser unit including laser sources, beam distributor and frequency reference modules. Apart from the electronics, the whole equipment has been constructed within a volume of 0.54 $m^3$. The systematic fractional uncertainty has been evaluated to be $7.7\times 10^{-17}$, and the Allan deviation fits to be $2.3\times {10}^{-14}/\sqrtτ$ by clock self-comparison with a probe pulse time 20 ms. △ Less

Submitted 13 July, 2016; originally announced July 2016.

Journal ref: App. Phys. B 123(4): 112, 2021

GodunovSPH with shear viscosity : implementation and tests

Authors: Seung-Hoon Cha, Matt A. Wood

Abstract: The acceleration and energy dissipation terms due to the shear viscosity have been implemented and tested in GodunovSPH. The double summation method has been employed to avoid the well known numerical noise of the second derivative in particle based codes. The plane Couette flow with various initial and boundary conditions have been used as tests, and the numerical and analytical results show a go… ▽ More The acceleration and energy dissipation terms due to the shear viscosity have been implemented and tested in GodunovSPH. The double summation method has been employed to avoid the well known numerical noise of the second derivative in particle based codes. The plane Couette flow with various initial and boundary conditions have been used as tests, and the numerical and analytical results show a good agreement. Not only the viscosity--only calculation, but the full hydrodynamics simulations have been performed, and they show expected results as well. The very low kinematic viscosity simulations show a turbulent pattern when the Reynolds number exceeds $\sim$$10^2$. The critical value of the Reynolds number at the transition point of the laminar and turbulent flows coincides with the previous works approximately. A smoothed dynamic viscosity has been suggested to describe the individual kinematic viscosity of particles. The infinitely extended Couette flow which has two layers of different viscosities has been simulated to check the smoothed dynamic viscosity, and the result agrees well with the analytic solution. In order to compare the standard SPH and GodunovSPH, the two layers test has been performed again with a density contrast. GodunovSPH shows less dispersion than the standard SPH, but there is no significant difference in the results. The results of the viscous ring evolution has also been presented as well, and the numerical results agrees with the analytic solution. △ Less

Submitted 22 February, 2016; originally announced February 2016.

Comments: Accepted in MNRAS

Technology for the next gravitational wave detectors

Authors: Valery P. Mitrofanov, Shiuh Chao, Huang-Wei Pan, Ling-Chi Kuo, Garrett Cole, Jerome Degallaix, Benno Willke

Abstract: This paper reviews some of the key enabling technologies for advanced and future laser interferometer gravitational wave detectors, which must combine test masses with the lowest possible optical and acoustic losses, with high stability lasers and various techniques for suppressing noise. Sect. 1 of this paper presents a review of the acoustic properties of test masses. Sect. 2 reviews the technol… ▽ More This paper reviews some of the key enabling technologies for advanced and future laser interferometer gravitational wave detectors, which must combine test masses with the lowest possible optical and acoustic losses, with high stability lasers and various techniques for suppressing noise. Sect. 1 of this paper presents a review of the acoustic properties of test masses. Sect. 2 reviews the technology of the amorphous dielectric coatings which are currently universally used for the mirrors in advanced laser interferometers, but for which lower acoustic loss would be very advantageous. In sect. 3 a new generation of crystalline optical coatings that offer a substantial reduction in thermal noise is reviewed. The optical properties of test masses are reviewed in sect. 4, with special focus on the properties of silicon, an important candidate material for future detectors. Sect. 5 of this paper presents the very low noise, high stability laser technology that underpins all advanced and next generation laser interferometers. △ Less

Submitted 16 February, 2016; originally announced February 2016.

Journal ref: Sci China-Phys Mech Astron, 2015, 58(12): 120404

Calibration of the Advanced LIGO detectors for the discovery of the binary black-hole merger GW150914

Authors: The LIGO Scientific Collaboration, B. P. Abbott, R. Abbott, T. D. Abbott, M. R. Abernathy, K. Ackley, C. Adams, P. Addesso, R. X. Adhikari, V. B. Adya, C. Affeldt, N. Aggarwal, O. D. Aguiar, A. Ain, P. Ajith, B. Allen, P. A. Altin, D. V. Amariutei, S. B. Anderson, W. G. Anderson, K. Arai, M. C. Araya, C. C. Arceneaux, J. S. Areeda, K. G. Arun , et al. (702 additional authors not shown)

Abstract: In Advanced LIGO, detection and astrophysical source parameter estimation of the binary black hole merger GW150914 requires a calibrated estimate of the gravitational-wave strain sensed by the detectors. Producing an estimate from each detector's differential arm length control loop readout signals requires applying time domain filters, which are designed from a frequency domain model of the detec… ▽ More In Advanced LIGO, detection and astrophysical source parameter estimation of the binary black hole merger GW150914 requires a calibrated estimate of the gravitational-wave strain sensed by the detectors. Producing an estimate from each detector's differential arm length control loop readout signals requires applying time domain filters, which are designed from a frequency domain model of the detector's gravitational-wave response. The gravitational-wave response model is determined by the detector's opto-mechanical response and the properties of its feedback control system. The measurements used to validate the model and characterize its uncertainty are derived primarily from a dedicated photon radiation pressure actuator, with cross-checks provided by optical and radio frequency references. We describe how the gravitational-wave readout signal is calibrated into equivalent gravitational-wave-induced strain and how the statistical uncertainties and systematic errors are assessed. Detector data collected over 38 calendar days, from September 12 to October 20, 2015, contain the event GW150914 and approximately 16 of coincident data used to estimate the event false alarm probability. The calibration uncertainty is less than 10% in magnitude and 10 degrees in phase across the relevant frequency band 20 Hz to 1 kHz. △ Less

Submitted 28 February, 2017; v1 submitted 11 February, 2016; originally announced February 2016.

Comments: 15 pages, 10 figures

Journal ref: Phys. Rev. D 95, 062003 (2017)

Towards thermal noise free optomechanics

Authors: Michael Page, Yiqiu Ma, Chunnong Zhao, David Blair, Li Ju, Huang-Wei Pan, Shiuh Chao, Valery Mitrofanov, Hamed Sadeghian

Abstract: Thermal noise generally greatly exceeds quantum noise in optomechanical devices unless the mechanical frequency is very high or the thermodynamic temperature is very low. This paper addresses the design concept for a novel optomechanical device capable of ultrahigh quality factors in the audio frequency band with negligible thermal noise. The proposed system consists of a minimally supported milli… ▽ More Thermal noise generally greatly exceeds quantum noise in optomechanical devices unless the mechanical frequency is very high or the thermodynamic temperature is very low. This paper addresses the design concept for a novel optomechanical device capable of ultrahigh quality factors in the audio frequency band with negligible thermal noise. The proposed system consists of a minimally supported millimeter scale pendulum mounted in a Double End-Mirror Sloshing (DEMS) cavity that is topologically equivalent to a Membrane-in-the-Middle (MIM) cavity. The radiation pressure inside the high-finesse cavity allows for high optical stiffness, cancellation of terms which lead to unwanted negative dam** and suppression of quantum radiation pressure noise. We solve for the optical spring dynamics of the system using the Hamiltonian, find the noise spectral density and show that stable optical trap** is possible. We also assess various loss mechanisms, one of the most important being the acceleration loss due to the optical spring. We show that practical devices, starting from a centre-of-mass pendulum frequency of 0.1 Hz, could achieve a maximum quality factor of $10^{14}$ with optical spring stiffened frequency 1-10 kHz. Small resonators of mass 1 $μ$g or less could achieve a Q-factor of $10^{11}$ at a frequency of 100 kHz. Applications for such devices include white light cavities for improvement of gravitational wave detectors, or sensors able to operate near the quantum limit. △ Less

Submitted 22 August, 2016; v1 submitted 11 February, 2016; originally announced February 2016.

Comments: 13 pages, 11 figures. Third revision: Uploaded revised version upon considerations of the referees selected at Journal of Physics D: Applied Physics. PACS Numbers: 42.50.Pq, 42.50.Lc

First measurements of the flux integral with the NIST-4 watt balance

Authors: D. Haddad, F. Seifert, L. S. Chao, A. Cao, G. Sineriz, J. R. Pratt, D. B. Newell, S. Schlamminger

Abstract: In early 2014, construction of a new watt balance, named NIST-4, has started at the National Institute of Standards and Technology (NIST). In a watt balance, the gravitational force of an unknown mass is compensated by an electromagnetic force produced by a coil in a magnet system. The electromagnetic force depends on the current in the coil and the magnetic flux integral. Most watt balances featu… ▽ More In early 2014, construction of a new watt balance, named NIST-4, has started at the National Institute of Standards and Technology (NIST). In a watt balance, the gravitational force of an unknown mass is compensated by an electromagnetic force produced by a coil in a magnet system. The electromagnetic force depends on the current in the coil and the magnetic flux integral. Most watt balances feature an additional calibration mode, referred to as velocity mode, which allows one to measure the magnetic flux integral to high precision. In this article we describe first measurements of the flux integral in the new watt balance. We introduce measurement and data analysis techniques to assess the quality of the measurements and the adverse effects of vibrations on the instrument. △ Less

Submitted 16 March, 2015; originally announced March 2015.

Comments: 7 pages, 8 figures, accepted for publication in IEEE Trans. Instrum. Meas. This Journal can be found online at http://ieeexplore.ieee.org/xpl/RecentIssue.jsp?punumber=19

A summary of the Planck constant measurements using a watt balance with a superconducting solenoid at NIST

Authors: S. Schlamminger, R. L. Steiner, D. Haddad, D. B. Newell, F. Seifert, L. S. Chao, R. Liu, E. R. Williams, J. R. Pratt

Abstract: Researchers at the National Institute of Standards and Technology have been using a watt balance, NIST-3, to measure the Planck constant $h$ for over ten years. Two recently published values disagree by more than one standard uncertainty. The motivation for the present manuscript is twofold. First, we correct the latest published number to take into account a recently discovered systematic error i… ▽ More Researchers at the National Institute of Standards and Technology have been using a watt balance, NIST-3, to measure the Planck constant $h$ for over ten years. Two recently published values disagree by more than one standard uncertainty. The motivation for the present manuscript is twofold. First, we correct the latest published number to take into account a recently discovered systematic error in mass dissemination at the Bureau International des Poids et Mesures (BIPM). Second, we provide guidance on how to combine the two numbers into one final result. In order to adequately reflect the discrepancy, we added an additional systematic uncertainty to the published uncertainty budgets. The final value of $h$ measured with NIST-3 is $h = 6.626\,069\,36(37)\times 10^{-34}\,\mbox{J\,s}$. This result is $77(57) \times 10^{-9}$ fractionally higher than $h_{\mathrm{90}}$. Each number in parentheses gives the value of the standard uncertainty in the last two digits of the respective value and $h_{\mathrm{90}}$ is the conventional value of the Planck constant given by $h_{\mathrm{90}}\equiv 4 /( K_{\mathrm{J-90}}^2 R_{\mathrm{K-90}})$, where $K_{\mathrm{J-90}}$ and $R_{\mathrm{K-90}}$ denote the conventional values of the Josephson and von Klitzing constants, respectively. △ Less

Submitted 27 January, 2015; originally announced January 2015.

Comments: 3 pages 2 figures. Accepted by metrologia. Link to the Journal Homepage: http://iopscience.iop.org/0026-1394

A determination of the local acceleration of gravity for the NIST-4 watt balance

Authors: E. J. Leaman, D. Haddad, F. Seifert, L. S. Chao, A. Cao, J. R. Pratt, S. Schlamminger, D. B. Newell

Abstract: A new watt balance is being constructed at the National Institute of Standards and Technology (NIST) in preparation for the redefinition of the International System of Units and the realization of mass through an exact value of the Planck constant. The total relative uncertainty goal for this instrument of a few parts in $10^{8}$ requires that the local acceleration due to gravity be known at the… ▽ More A new watt balance is being constructed at the National Institute of Standards and Technology (NIST) in preparation for the redefinition of the International System of Units and the realization of mass through an exact value of the Planck constant. The total relative uncertainty goal for this instrument of a few parts in $10^{8}$ requires that the local acceleration due to gravity be known at the location of a test mass with a relative uncertainty on the order of only a few parts in $10^{9}$. To make this determination, both the horizontal and vertical gradients of gravity must be known such that gravity may be tied from an absolute reference in the laboratory to the precise mass location. We describe the procedures used to model and measure gravity variations throughout the laboratory and give our results. △ Less

Submitted 12 December, 2014; originally announced December 2014.

Comments: 7 pages, 10 figures, accepted for publication in IEEE Trans. Instrum. Meas. It will appear at http://ieeexplore.ieee.org/xpl/RecentIssue.jsp?punumber=19

A LEGO Watt Balance: An apparatus to determine a mass based on the new SI

Authors: L. S. Chao, S. Schlamminger, D. B. Newell, J. R. Pratt, F. Seifert, X. Zhang, G. Sineriz, M. Liu, D. Haddad

Abstract: A global effort to redefine our International System of Units (SI) is underway and the change to the new system is expected to occur in 2018. Within the newly redefined SI, the present base units will still exist but be derived from fixed numerical values of seven reference constants. More specifically, the unit of mass, the kilogram, will be realized through a fixed value of the Planck constant… ▽ More A global effort to redefine our International System of Units (SI) is underway and the change to the new system is expected to occur in 2018. Within the newly redefined SI, the present base units will still exist but be derived from fixed numerical values of seven reference constants. More specifically, the unit of mass, the kilogram, will be realized through a fixed value of the Planck constant $h$. For instance, a watt balance can be used to realize the kilogram unit of mass within a few parts in $10^8$. Such a balance has been designed and constructed at the National Institute of Standards and Technology. For educational outreach and to demonstrate the principle, we have constructed a LEGO tabletop watt balance capable of measuring a gram size mass to 1 % relative uncertainty. This article presents the design, construction, and performance of the LEGO watt balance and its ability to determine $h$ △ Less

Submitted 7 August, 2015; v1 submitted 4 December, 2014; originally announced December 2014.

Comments: Edited parts list, alternative circuit diagram. 12 pages, 7 figures. Also included is a partlist to build your own LEGO watt balance. The article has been submitted to American Journal of Physics. After it is published, it will be found at http://scitation.aip.org/content/aapt/journal/ajp

Determination of the Planck constant using a watt balance with a superconducting magnet system at the National Institute of Standards and Technology

Authors: Stephan Schlamminger, Darine Haddad, Frank Seifert, Leon S Chao, David B Newell, Ruimin Liu, Richard L Steiner, Jon R Pratt

Abstract: For the past two years, measurements have been performed with a watt balance at the National Institute of Standards and Technology (NIST) to determine the Planck constant. A detailed analysis of these measurements and their uncertainties has led to the value $h=6.626\,069\,79(30)\times 10^{-34}\,$J$\,$s. The relative standard uncertainty is $ 45\times 10^{-9}$. This result is $141\times 10^{-9}$ f… ▽ More For the past two years, measurements have been performed with a watt balance at the National Institute of Standards and Technology (NIST) to determine the Planck constant. A detailed analysis of these measurements and their uncertainties has led to the value $h=6.626\,069\,79(30)\times 10^{-34}\,$J$\,$s. The relative standard uncertainty is $ 45\times 10^{-9}$. This result is $141\times 10^{-9}$ fractionally higher than $h_{90}$. Here $h_{90}$ is the conventional value of the Planck constant given by $h_{90}\equiv 4 /( K_{\mathrm{J-90}}^2R_{\mathrm{K-90}})$, where $K_{\mathrm{J-90}}$ and $R_{\mathrm{K-90}}$ denote the conventional values of the Josephson and von Klitzing constants, respectively. △ Less

Submitted 24 April, 2014; v1 submitted 31 January, 2014; originally announced January 2014.

Comments: 22 pages, 8 figures, published in metrologia

Journal ref: Metrologia 51, S15 (2014)

Ultrafast zero balance of the oscillator-strength sum rule in graphene

Authors: Jaeseok Kim, Seong Chu Lim, Seung ** Chae, Inhee Maeng, Younghwan Choi, Soonyoung Cha, Young Hee Lee, Hyunyong Choi

Abstract: Oscillator-strength sum rule in light-induced transitions is one general form of quantum-mechanical identities. Although this sum rule is well established in equilibrium photo-physics, an experimental corroboration for the validation of the sum rule in a nonequilibrium regime has been a long-standing unexplored question. The simple band structure of graphene is an ideal system for investigating th… ▽ More Oscillator-strength sum rule in light-induced transitions is one general form of quantum-mechanical identities. Although this sum rule is well established in equilibrium photo-physics, an experimental corroboration for the validation of the sum rule in a nonequilibrium regime has been a long-standing unexplored question. The simple band structure of graphene is an ideal system for investigating this question due to the linear Dirac-like energy dispersion. Here, we employed both ultrafast terahertz and optical spectroscopy to directly monitor the transient oscillator-strength balancing between quasi-free low-energy oscillators and high-energy Fermi-edge ones. Upon photo-excitation of hot Dirac fermions, we observed that the ultrafast depletion of high-energy oscillators precisely complements the increased terahertz absorption oscillators. Our results may provide an experimental priori to understand, for example, the intrinsic free-carrier dynamics to the high-energy photo-excitation, responsible for optoelectronic operation such as graphene-based phototransistor or solar-energy harvesting devices. △ Less

Submitted 10 September, 2013; originally announced September 2013.

SuperB Technical Design Report

Authors: SuperB Collaboration, M. Baszczyk, P. Dorosz, J. Kolodziej, W. Kucewicz, M. Sapor, A. Jeremie, E. Grauges Pous, G. E. Bruno, G. De Robertis, D. Diacono, G. Donvito, P. Fusco, F. Gargano, F. Giordano, F. Loddo, F. Loparco, G. P. Maggi, V. Manzari, M. N. Mazziotta, E. Nappi, A. Palano, B. Santeramo, I. Sgura, L. Silvestris , et al. (384 additional authors not shown)

Abstract: In this Technical Design Report (TDR) we describe the SuperB detector that was to be installed on the SuperB e+e- high luminosity collider. The SuperB asymmetric collider, which was to be constructed on the Tor Vergata campus near the INFN Frascati National Laboratory, was designed to operate both at the Upsilon(4S) center-of-mass energy with a luminosity of 10^{36} cm^{-2}s^{-1} and at the tau/ch… ▽ More In this Technical Design Report (TDR) we describe the SuperB detector that was to be installed on the SuperB e+e- high luminosity collider. The SuperB asymmetric collider, which was to be constructed on the Tor Vergata campus near the INFN Frascati National Laboratory, was designed to operate both at the Upsilon(4S) center-of-mass energy with a luminosity of 10^{36} cm^{-2}s^{-1} and at the tau/charm production threshold with a luminosity of 10^{35} cm^{-2}s^{-1}. This high luminosity, producing a data sample about a factor 100 larger than present B Factories, would allow investigation of new physics effects in rare decays, CP Violation and Lepton Flavour Violation. This document details the detector design presented in the Conceptual Design Report (CDR) in 2007. The R&D and engineering studies performed to arrive at the full detector design are described, and an updated cost estimate is presented. A combination of a more realistic cost estimates and the unavailability of funds due of the global economic climate led to a formal cancelation of the project on Nov 27, 2012. △ Less

Submitted 24 June, 2013; originally announced June 2013.

Comments: 495 pages

Report number: INFN-13-01/PI, LAL 13-01, SLAC-R-1003

High quality factor mg-scale silicon mechanical resonators for 3-mode optoacoustic parametric amplifiers

Authors: Francis Achilles Torres, Phillip Meng, Li Ju, Chunnong Zhao, David Gerald Blair, Kai-Yu Liu, Shiuh Chao, Mariusz Martyniuk, Isabelle Roch-Jeune, Raffaele Flaminio, Christophe Michel

Abstract: Milligram-scale resonators have been shown to be suitable for the creation of 3-mode optoacoustic parametric amplifiers, based on a phenomena first predicted for advanced gravitational-wave detectors. To achieve practical optoacoustic parametric amplification, high quality factor resonators are required. We present millimetre-scale silicon resonators designed to exhibit a torsional vibration mode… ▽ More Milligram-scale resonators have been shown to be suitable for the creation of 3-mode optoacoustic parametric amplifiers, based on a phenomena first predicted for advanced gravitational-wave detectors. To achieve practical optoacoustic parametric amplification, high quality factor resonators are required. We present millimetre-scale silicon resonators designed to exhibit a torsional vibration mode with a frequency in the 10^5 - 10^6 Hz range, for observation of 3-mode optoacoustic interactions in a compact table-top system. Our design incorporates an isolation stage and minimizes the acoustic loss from optical coating. We observe a quality factor of 7.5 x 10^5 for a mode frequency of 401.5 kHz, at room temperature and pressure of 10^-3 Pa. We confirmed the mode shape by map** the amplitude response across the resonator and comparing to finite element modelling. This study contributes towards the development of 3-mode optoacoustic parametric amplifiers for use in novel high-sensitivity signal transducers and quantum measurement experiments. △ Less

Submitted 24 March, 2013; originally announced March 2013.

Comments: 6 pages, 4 figures, 2 tables

Pseudo-Degeneracy in Handbell Modes

Authors: Sungdo Cha, John Buschert, Daniel King

Abstract: The vibrational modes of handbells exist in nearly-degenerate pairs which have been split by nonuniformities in the bell. The possibility of intentionally re-combining a pair into pseudo-degeneracy was explored by adding mass to various locations on a C4 handbell. Depending on the location and mass added to the bell, the modes can be shifted in position and frequency as observed by a real-time h… ▽ More The vibrational modes of handbells exist in nearly-degenerate pairs which have been split by nonuniformities in the bell. The possibility of intentionally re-combining a pair into pseudo-degeneracy was explored by adding mass to various locations on a C4 handbell. Depending on the location and mass added to the bell, the modes can be shifted in position and frequency as observed by a real-time holographic interferometry system. By moving and varying the added mass, one pair of modes was successfully brought into a pseudo-degeneracy. △ Less

Submitted 4 April, 2010; originally announced April 2010.

Comments: 10 Pages, 10 Figures

Grou** in the stock markets of Japan and Korea

Authors: Woo-Sung Jung, Okyu Kwon, Taisei Kaizoji, Seungbyung Chae, Hie-Tae Moon

Abstract: We investigated the temporally evolving network structures of the Japanese and Korean stock markets through the minimum spanning trees composed of listed stocks. We tested the validity of conventional grou** by industrial categories, and found a common trend of decrease for Japan and Korea. This phenomenon supports the increasing external effects on the markets due to the globalization of both… ▽ More We investigated the temporally evolving network structures of the Japanese and Korean stock markets through the minimum spanning trees composed of listed stocks. We tested the validity of conventional grou** by industrial categories, and found a common trend of decrease for Japan and Korea. This phenomenon supports the increasing external effects on the markets due to the globalization of both countries. At last the Korean market are grouped with the MSCI Korea Index, a good reference for foreigners' trading, in the early 2000s \cite{Jung2006}. In the Japanese market, this tendency is strengthened more and more by burst of the bubble in 1990's. △ Less

Submitted 27 November, 2005; originally announced November 2005.

Comments: 12 pages

Dynamics of the return distribution in the Korean financial market

Authors: Jae-Suk Yang, Seungbyung Chae, Woo-Sung Jung, Hie-Tae Moon

Abstract: In this paper, we studied the dynamics of the log-return distribution of the Korean Composition Stock Price Index (KOSPI) from 1992 to 2004. Based on the microscopic spin model, we found that while the index during the late 1990s showed a power-law distribution, the distribution in the early 2000s was exponential. This change in distribution shape was caused by the duration and velocity, among o… ▽ More In this paper, we studied the dynamics of the log-return distribution of the Korean Composition Stock Price Index (KOSPI) from 1992 to 2004. Based on the microscopic spin model, we found that while the index during the late 1990s showed a power-law distribution, the distribution in the early 2000s was exponential. This change in distribution shape was caused by the duration and velocity, among other parameters, of the information that flowed into the market. △ Less

Submitted 16 November, 2005; v1 submitted 14 November, 2005; originally announced November 2005.

Comments: 10 pages, 4 figures

Journal ref: Physica A 363 (2006) 377-382

Characteristics of the Korean stock market correlations

Authors: Woo-Sung Jung, Seungbyung Chae, Jae-Suk Yang, Hie-Tae Moon

Abstract: In this study, we establish a network structure of the Korean stock market, one of the emerging markets, with its minimum spanning tree through the correlation matrix. Base on this analysis, it is found that the Korean stock market doesn't form the clusters of the business sectors or of the industry categories. When the MSCI (Morgan Stanley Capital International Inc.) index is exploited, we foun… ▽ More In this study, we establish a network structure of the Korean stock market, one of the emerging markets, with its minimum spanning tree through the correlation matrix. Base on this analysis, it is found that the Korean stock market doesn't form the clusters of the business sectors or of the industry categories. When the MSCI (Morgan Stanley Capital International Inc.) index is exploited, we found that the clusters of the Korean stock market is formed. This finding implicates that the Korean market, in this context, is characteristically different form the mature markets. △ Less

Submitted 15 June, 2005; v1 submitted 1 April, 2005; originally announced April 2005.

Comments: 11 pages, 3 figures, revised on June 2005

Journal ref: Physica A 361 pp.263-271 (2006).