-
Diamond molecular balance: Revolutionizing high-resolution mass spectrometry from MDa to TDa at room temperature
Authors:
Donggeun Lee,
Seung-Woo Jeon,
Chang-Hwan Yi,
Yang-Hee Kim,
Yeeun Choi,
Sang-Hun Lee,
**woong Cha,
Seung-Bo Shim,
Junho Suh,
Il-Young Kim,
Dongyeon Daniel Kang,
Hojoong Jung,
Cherlhyun Jeong,
Jae-pyoung Ahn,
Hee Chul Park,
Sang-Wook Han,
Chulki Kim
Abstract:
The significance of mass spectrometry lies in its unparalleled ability to accurately identify and quantify molecules in complex samples, providing invaluable insights into molecular structures and interactions. Here, we leverage diamond nanostructures as highly sensitive mass sensors by utilizing a self-excitation mechanism under an electron beam in a conventional scanning electron microscope (SEM…
▽ More
The significance of mass spectrometry lies in its unparalleled ability to accurately identify and quantify molecules in complex samples, providing invaluable insights into molecular structures and interactions. Here, we leverage diamond nanostructures as highly sensitive mass sensors by utilizing a self-excitation mechanism under an electron beam in a conventional scanning electron microscope (SEM). The diamond molecular balance (DMB) exhibits exceptional mass resolution of a few MDa and an extensive dynamic range from MDa to TDa, positioning itself as a forefront molecular balance operating at room temperature. Notably, the DMB measures the mass of a single bacteriophage T4, achieving a mass resolution of 4.7 MDa for an analyte at 184 MDa, while precisely determining their positional information on the device. These findings highlight the groundbreaking potential of the DMB as a revolutionary tool for mass analysis at room temperature.
△ Less
Submitted 6 June, 2024; v1 submitted 4 June, 2024;
originally announced June 2024.
-
A model of umbral oscillations inherited from subphotospheric fast-body modes
Authors:
Juhyung Kang,
Jongchul Chae,
Kyuhyoun Cho,
Soosang Kang,
Eun-Kyung Lim
Abstract:
Recently, complex horizontal patterns of umbral oscillations have been reported, but their physical nature and origin are still not fully understood. Here we show that the two-dimensional patterns of umbral oscillations of slow waves are inherited from the subphotospheric fast-body modes. Using a simple analytic model, we successfully reproduced the temporal evolution of oscillation patterns with…
▽ More
Recently, complex horizontal patterns of umbral oscillations have been reported, but their physical nature and origin are still not fully understood. Here we show that the two-dimensional patterns of umbral oscillations of slow waves are inherited from the subphotospheric fast-body modes. Using a simple analytic model, we successfully reproduced the temporal evolution of oscillation patterns with a finite number of fast-body modes. In this model, the radial apparent propagation of the pattern is associated with the appropriate combination of the amplitudes in radial modes. We also find that the oscillation patterns are dependent on the oscillation period. This result indicates that there is a cutoff radial mode, which is a unique characteristic of the model of fast-body modes. In principle, both internal and external sources can excite these fast-body modes and produce horizontal patterns of umbral oscillations.
△ Less
Submitted 2 June, 2024;
originally announced June 2024.
-
Enlightening the blind spot of the Michaelis-Menten rate law: The role of relaxation dynamics in molecular complex formation
Authors:
Junghun Chae,
Roktaek Lim,
Thomas L. P. Martin,
Cheol-Min Ghim,
Pan-Jun Kim
Abstract:
The century-long Michaelis-Menten rate law and its modifications in the modeling of biochemical rate processes stand on the assumption that the concentration of the complex of interacting molecules, at each moment, rapidly approaches an equilibrium (quasi-steady state) compared to the pace of molecular concentration changes. Yet, in the case of actively time-varying molecular concentrations with t…
▽ More
The century-long Michaelis-Menten rate law and its modifications in the modeling of biochemical rate processes stand on the assumption that the concentration of the complex of interacting molecules, at each moment, rapidly approaches an equilibrium (quasi-steady state) compared to the pace of molecular concentration changes. Yet, in the case of actively time-varying molecular concentrations with transient or oscillatory dynamics, the deviation of the complex profile from the quasi-steady state becomes relevant. A recent theoretical approach, known as the effective time-delay scheme (ETS), suggests that the delay by the relaxation time of molecular complex formation contributes to the substantial breakdown of the quasi-steady state assumption. Here, we systematically expand this ETS and inquire into the comprehensive roles of relaxation dynamics in complex formation. Through the modeling of rhythmic protein-protein and protein-DNA interactions and the mammalian circadian clock, our analysis reveals the effect of the relaxation dynamics beyond the time delay, which extends to the dampening of changes in the complex concentration with a reduction in the oscillation amplitude against the quasi-steady state. Interestingly, the combined effect of the time delay and amplitude reduction shapes both qualitative and quantitative oscillatory patterns such as the emergence and variability of the mammalian circadian rhythms. These findings highlight the drawback of the routine assumption of quasi-steady states and enhance the mechanistic understanding of rich time-varying biomolecular activities.
△ Less
Submitted 7 June, 2024; v1 submitted 18 March, 2024;
originally announced March 2024.
-
Optimal mesh generation for a non-iterative grid-converged solution of flow through a blade passage using deep reinforcement learning
Authors:
Innyoung Kim,
Jonghyun Chae,
Donghyun You
Abstract:
An automatic mesh generation method for optimal computational fluid dynamics (CFD) analysis of a blade passage is developed using deep reinforcement learning (DRL). Unlike conventional automation techniques, which require repetitive tuning of meshing parameters for each new geometry and flow condition, the method developed herein trains a mesh generator to determine optimal parameters across varyi…
▽ More
An automatic mesh generation method for optimal computational fluid dynamics (CFD) analysis of a blade passage is developed using deep reinforcement learning (DRL). Unlike conventional automation techniques, which require repetitive tuning of meshing parameters for each new geometry and flow condition, the method developed herein trains a mesh generator to determine optimal parameters across varying configurations in a non-iterative manner. Initially, parameters controlling mesh shape are optimized to maximize geometric mesh quality, as measured by the ratio of determinants of Jacobian matrices and skewness. Subsequently, resolution-controlling parameters are optimized by incorporating CFD results. Multi-agent reinforcement learning is employed, enabling 256 agents to construct meshes and perform CFD analyses across randomly assigned flow configurations in parallel, aiming for maximum simulation accuracy and computational efficiency within a multi-objective optimization framework. After training, the mesh generator is capable of producing meshes that yield converged solutions at desired computational costs for new configurations in a single simulation, thereby eliminating the need for iterative CFD procedures for grid convergence. The robustness and effectiveness of the method are investigated across various blade passage configurations, accommodating a range of blade geometries, including high-pressure and low-pressure turbine blades, axial compressor blades, and impulse rotor blades. Furthermore, the method is capable of identifying the optimal mesh resolution for diverse flow conditions, including complex phenomena like boundary layers, shock waves, and flow separation. The optimality is confirmed by comparing the accuracy and the efficiency achieved in a single attempt with those from the conventional iterative optimization method.
△ Less
Submitted 22 February, 2024;
originally announced February 2024.
-
High Resolution Imaging Spectroscopy of a Tiny Sigmoidal Mini-filament Eruption
Authors:
Jiasheng Wang,
Jeongwoo Lee,
Jongchul Chae,
Yan Xu,
Wenda Cao,
Haimin Wang
Abstract:
Minifilament (MF) eruption producing small jets and micro-flares is regarded as an important source for coronal heating and the solar wind transients through studies mostly based on coronal observations in the extreme ultraviolet (EUV) and X-ray wavelengths. In this study, we focus on the chromospheric plasma diagnostics of a tiny minifilament in quiet Sun located at [71'', 450''] on 2021--08--07…
▽ More
Minifilament (MF) eruption producing small jets and micro-flares is regarded as an important source for coronal heating and the solar wind transients through studies mostly based on coronal observations in the extreme ultraviolet (EUV) and X-ray wavelengths. In this study, we focus on the chromospheric plasma diagnostics of a tiny minifilament in quiet Sun located at [71'', 450''] on 2021--08--07 at 19:11 UT observed as part of the ninth encounter of the PSP campaign. Main data obtained are the high cadence, high resolution spectroscopy from the Fast Imaging Solar Spectrograph (FISS) and high-resolution magnetograms from the Near InfraRed Imaging Spectropolarimeter (NIRIS) on the 1.6~m Goode Solar Telescope (GST) at Big Bear Solar Observatory (BBSO). The mini-filament with size $\sim$1''$\times$5'' and a micro-flare are detected in both the H$α$ line center and SDO/AIA 193, 304~Å images. On the NIRIS magnetogram, we found that the cancellation of a magnetic bipole in the footpoints of the minifilament triggered its eruption in a sigmoidal shape. By inversion of the \ha\ and Ca {\sc ii} spectra under the embedded cloud model, we found a temperature increase of 3,800 K in the brightening region, associated with rising speed average of MF increased by 18~$km~s^{-1}$. This cool plasma is also found in the EUV images. We estimate the kinetic energy change of the rising filament as 1.5$\times$$10^{25}$~ergs, and thermal energy accumulation in the MF, 1.4$\times$$10^{25}$~ergs. From the photospheric magnetograms, we find the magnetic energy change is 1.6$\times$$10^{26}$~ergs across the PIL of converging opposite magnetic elements, which amounts to the energy release in the chromosphere in this smallest two-ribbon flare ever observed.
△ Less
Submitted 13 February, 2024;
originally announced February 2024.
-
Wafer-scale fabrication of 2D nanostructures via thermomechanical nanomolding
Authors:
Mehrdad T Kiani,
Quynh P Sam,
Yeon Sik Jung,
Hyeuk ** Han,
Judy J Cha
Abstract:
With shrinking dimensions in integrated circuits, sensors, and functional devices, there is a pressing need to develop nanofabrication techniques with simultaneous control of morphology, microstructure, and material composition over wafer length scales. Current techniques are largely unable to meet all these conditions, suffering from poor control of morphology and defect structure or requiring ex…
▽ More
With shrinking dimensions in integrated circuits, sensors, and functional devices, there is a pressing need to develop nanofabrication techniques with simultaneous control of morphology, microstructure, and material composition over wafer length scales. Current techniques are largely unable to meet all these conditions, suffering from poor control of morphology and defect structure or requiring extensive optimization or post-processing to achieve desired nanostructures. Recently, thermomechanical nanomolding (TMNM) has been shown to yield single-crystalline, high aspect ratio nanowires of metals, alloys, and intermetallics over wafer-scale distances. Here, we extend TMNM for wafer-scale fabrication of 2D nanostructures. Using Cu, we successfully nanomold Cu nanoribbons with widths < 50 nm, depths ~ 0.5-1 microns and lengths ~ 7 mm into Si trenches at conditions compatible with back end of line processing. Through SEM cross-section imaging and 4D-STEM grain orientation maps, we show that the grain size of the bulk feedstock is transferred to the nanomolded structures up to and including single crystal Cu. Based on the retained microstructures of molded 2D Cu, we discuss the deformation mechanism during molding for 2D TMNM.
△ Less
Submitted 16 June, 2023;
originally announced June 2023.
-
Single-particle-exact density functional theory
Authors:
Martin-Isbjörn Trappe,
Jun Hao Hue,
Jonah Huang Zi Chao,
Mikołaj Paraniak,
Djamila Hiller,
Jerzy Ciosłowski,
Berthold-Georg Englert
Abstract:
We introduce 'single-particle-exact density functional theory' (1pEx-DFT), a novel density functional approach that represents all single-particle contributions to the energy with exact functionals. Here, we parameterize interaction energy functionals by utilizing two new schemes for constructing density matrices from 'participation numbers' of the single-particle states of quantum many-body syste…
▽ More
We introduce 'single-particle-exact density functional theory' (1pEx-DFT), a novel density functional approach that represents all single-particle contributions to the energy with exact functionals. Here, we parameterize interaction energy functionals by utilizing two new schemes for constructing density matrices from 'participation numbers' of the single-particle states of quantum many-body systems. These participation numbers play the role of the variational variables akin to the particle densities in standard orbital-free density functional theory. We minimize the total energies with the help of evolutionary algorithms and obtain ground-state energies that are typically accurate at the one-percent level for our proof-of-principle simulations that comprise interacting Fermi gases as well as the electronic structure of atoms and ions, with and without relativistic corrections. We thereby illustrate the ingredients and practical features of 1pEx-DFT and reveal its potential of becoming an accurate, scalable, and transferable technology for simulating mesoscopic quantum many-body systems.
△ Less
Submitted 16 October, 2023; v1 submitted 4 May, 2023;
originally announced May 2023.
-
Axial Higgs Mode Detected by Quantum Pathway Interference in RTe3
Authors:
Yi** Wang,
Ioannis Petrides,
Grant McNamara,
Md Mofazzel Hosen,
Shiming Lei,
Yueh-Chun Wu,
James L. Hart,
Hongyan Lv,
Jun Yan,
Di Xiao,
Judy J. Cha,
Prineha Narang,
Leslie M. Schoop,
Kenneth S. Burch
Abstract:
The observation of the Higgs boson solidified the standard model of particle physics. However, explanations of anomalies (e.g. dark matter) rely on further symmetry breaking calling for an undiscovered axial Higgs mode. In condensed matter the Higgs was seen in magnetic, superconducting and charge density wave(CDW) systems. Uncovering a low energy mode's vector properties is challenging, requiring…
▽ More
The observation of the Higgs boson solidified the standard model of particle physics. However, explanations of anomalies (e.g. dark matter) rely on further symmetry breaking calling for an undiscovered axial Higgs mode. In condensed matter the Higgs was seen in magnetic, superconducting and charge density wave(CDW) systems. Uncovering a low energy mode's vector properties is challenging, requiring going beyond typical spectroscopic or scattering techniques. Here, we discover an axial Higgs mode in the CDW system RTe3 using the interference of quantum pathways. In RTe3 (R=La,Gd), the electronic ordering couples bands of equal or different angular momenta. As such, the Raman scattering tensor associated to the Higgs mode contains both symmetric and antisymmetric components, which can be excited via two distinct, but degenerate pathways. This leads to constructive or destructive interference of these pathways, depending on the choice of the incident and Raman scattered light polarization. The qualitative behavior of the Raman spectra is well-captured by an appropriate tight-binding model including an axial Higgs mode. The elucidation of the antisymmetric component provides direct evidence that the Higgs mode contains an axial vector representation (i.e. a pseudo-angular momentum) and hints the CDW in RTe3 is unconventional. Thus we provide a means for measuring collective modes quantum properties without resorting to extreme experimental conditions.
△ Less
Submitted 4 December, 2021;
originally announced December 2021.
-
Superconducting Nanoelectromechanical Transducer Resilient to Magnetic Fields
Authors:
**woong Cha,
Hak-Seong Kim,
Jihwan Kim,
Seung-Bo Shim,
Junho Suh
Abstract:
Nanoscale electromechanical coupling provides a unique route towards control of mechanical motions and microwave fields in superconducting cavity electromechanical devices. Though their successes in utilizing the optomechanical or electromechanical back-action effects for various purposes, aluminum imposes severe constraints on their operating conditions with its low superconducting critical tempe…
▽ More
Nanoscale electromechanical coupling provides a unique route towards control of mechanical motions and microwave fields in superconducting cavity electromechanical devices. Though their successes in utilizing the optomechanical or electromechanical back-action effects for various purposes, aluminum imposes severe constraints on their operating conditions with its low superconducting critical temperature (1.2 K) and magnetic field (0.01 T). To extend the potential of the devices, here we fabricate a superconducting electromechanical device employing niobium and demonstrate a set of cavity electromechanical dynamics including back-action cooling and amplification, and electromechanically induced reflection at 4.2 K and in strong magnetic fields up to 0.8 T. This device could be used to realize electromechanical microwave components for quantum technologies by integrating amplifiers, converters, and circulators on a single chip that can be installed at the 4K stage of dilution refrigerators. Moreover, with its ability to control and readout nanomechanical motions simultaneously, this niobium electromechanical transducer could provide powerful nanomechanical sensing platforms.
△ Less
Submitted 25 November, 2020; v1 submitted 12 November, 2020;
originally announced November 2020.
-
Spectrally-Selective Vanadium Dioxide Based Tunable Metafilm Emitter for Dynamic Radiative Cooling
Authors:
Sydney Taylor,
Ryan McBurney,
Linshuang Long,
Payam Sabbaghi,
Jeremy Chao,
Li** Wang
Abstract:
Dynamic radiative cooling with variable emissive power is experimentally demonstrated in this study by a wavelength-selective tunable metafilm emitter, which consists of an opaque aluminum film, a sputtered silicon spacer, and a thermochromic vanadium dioxide (VO2) layer fabricated by a furnace oxidation method. The temperature-dependent spectral emittance, experimentally obtained from spectral re…
▽ More
Dynamic radiative cooling with variable emissive power is experimentally demonstrated in this study by a wavelength-selective tunable metafilm emitter, which consists of an opaque aluminum film, a sputtered silicon spacer, and a thermochromic vanadium dioxide (VO2) layer fabricated by a furnace oxidation method. The temperature-dependent spectral emittance, experimentally obtained from spectral reflectance measurements, clearly shows a pronounced emission peak around 10 um wavelength when the VO2 experiences an insulator-to-metal phase transition near 65C. The tunable metafilm emitter achieves a significant total emittance increase from 0.14 at room temperature to 0.6 at 100C. Theoretical modeling based on thin-film optics indicates that the emission enhancement at high temperatures is realized by Fabry-Perot cavity resonance with the metallic VO2 film. Moreover, a calorimetry-based thermal vacuum experiment was conducted and the enhanced thermal emission of the fabricated tunable metafilm sample was experimentally demonstrated at temperatures higher than the phase transition temperature, compared to black, aluminum and doped silicon samples, whose emittance changes little near room temperatures. The developed tunable metafilm emitter with variable spectrally-selective emittance in the mid-infrared holds great promise for both terrestrial and extraterrestrial dynamic radiative cooling applications.
△ Less
Submitted 13 May, 2020;
originally announced May 2020.
-
Experimental realization of on-chip topological nanoelectromechanical metamaterials
Authors:
**woong Cha,
Kun Woo Kim,
Chiara Daraio
Abstract:
Topological mechanical metamaterials translate condensed matter phenomena, like non-reciprocity and robustness to defects, into classical platforms. At small scales, topological nanoelectromechanical metamaterials (NEMM) can enable the realization of on-chip acoustic components, like unidirectional waveguides and compact delay-lines for mobile devices. Here, we report the experimental realization…
▽ More
Topological mechanical metamaterials translate condensed matter phenomena, like non-reciprocity and robustness to defects, into classical platforms. At small scales, topological nanoelectromechanical metamaterials (NEMM) can enable the realization of on-chip acoustic components, like unidirectional waveguides and compact delay-lines for mobile devices. Here, we report the experimental realization of NEMM phononic topological insulators, consisting of two-dimensional arrays of free-standing silicon nitride (SiN) nanomembranes that operate at high frequencies (10-20 MHz). We experimentally demonstrate the presence of edge states, by characterizing their localization and Dirac cone-like frequency dispersion. Our topological waveguides also exhibit robustness to waveguide distortions and pseudospin-dependent transport. The suggested devices open wide opportunities to develop functional acoustic systems for high-frequency signal processing applications.
△ Less
Submitted 27 June, 2018;
originally announced June 2018.
-
Nonlinear nano-electromechanical lattices for high-frequency, tunable stress propagation
Authors:
**woong Cha,
Chiara Daraio
Abstract:
Active manipulation of mechanical waves at high frequencies opens opportunities in heat management, radio-frequency (RF) signal processing, and quantum technologies. Nanoelectromechanical systems (NEMS) are appropriate platforms for develo** these technologies, offering energy transducibility between different physical domains, for example, converting optical or electrical signals into mechanica…
▽ More
Active manipulation of mechanical waves at high frequencies opens opportunities in heat management, radio-frequency (RF) signal processing, and quantum technologies. Nanoelectromechanical systems (NEMS) are appropriate platforms for develo** these technologies, offering energy transducibility between different physical domains, for example, converting optical or electrical signals into mechanical vibrations and viceversa. Existing NEMS platforms, however, are mostly linear, passive, and not dynamically controllable. Here, we report the realization of active manipulation of frequency band dispersion in one-dimensional (1D) nonlinear nanoelectromechanical lattices (NEML) in the RF domain (10-30 MHz). Our NEML is comprised of a periodic arrangement of mechanically coupled free-standing nano-membranes, with circular clamped boundaries. This design forms a flexural phononic crystals with a well-defined band gaps, 1.8 MHz wide. The application a DC gate voltage creates voltage-dependent on-site potentials, which can significantly shift the frequency bands of the device. Dynamic modulation of the voltage triggers nonlinear effects, which induce the formation of phononic band gaps in the acoustic branch. These devices could be used in tunable filters, ultrasonic delay lines and transducers for implantable medical devices.
△ Less
Submitted 16 March, 2018;
originally announced March 2018.
-
Enhanced interlayer neutral excitons and trions in trilayer van der Waals heterostructures
Authors:
Chanyeol Choi,
Jiahui Huang,
Hung-Chieh Cheng,
Hyunseok Kim,
Abhinav Kumar Vinod,
Sang-Hoon Bae,
V. Ongun Ozcelik,
Roberto Grassi,
Jongjae Chae,
Shu-Wei Huang,
Xiangfeng Duan,
Kristen Kaasbjerg,
Tony Low,
Chee Wei Wong
Abstract:
Vertically stacked van der Waals heterostructures constitute a promising platform for providing tailored band alignment with enhanced excitonic systems. Here we report observations of neutral and charged interlayer excitons in trilayer WSe2-MoSe2-WSe2 van der Waals heterostructures and their dynamics. The addition of a WSe2 layer in the trilayer leads to significantly higher photoluminescence quan…
▽ More
Vertically stacked van der Waals heterostructures constitute a promising platform for providing tailored band alignment with enhanced excitonic systems. Here we report observations of neutral and charged interlayer excitons in trilayer WSe2-MoSe2-WSe2 van der Waals heterostructures and their dynamics. The addition of a WSe2 layer in the trilayer leads to significantly higher photoluminescence quantum yields and tunable spectral resonance compared to its bilayer heterostructures at cryogenic temperatures. The observed enhancement in the photoluminescence quantum yield is due to significantly larger electron-hole overlap and higher light absorbance in the trilayer heterostructure, supported via first-principle pseudopotential calculations based on spin-polarized density functional theory. We further uncover the temperature- and power-dependence, as well as time-resolved photoluminescence of the trilayer heterostructure interlayer neutral excitons and trions. Our study elucidates the prospects of manipulating light emission from interlayer excitons and designing atomic heterostructures from first-principles for optoelectronics.
△ Less
Submitted 16 September, 2018; v1 submitted 19 June, 2017;
originally announced June 2017.
-
A New Method to Determine the Temperature of CMEs Using a Coronagraph Filter System
Authors:
Kyuhyoun Cho,
Jongchul Chae,
Eun-kyung Lim,
Kyung-suk Cho,
Su-Chan Bong,
Heesu Yang
Abstract:
The coronagraph is an instrument enables the investigation of faint features in the vicinity of the Sun, particularly coronal mass ejections (CMEs). So far coronagraphic observations have been mainly used to determine the geometric and kinematic parameters of CMEs. Here, we introduce a new method for the determination of CME temperature using a two filter (4025 A and 3934 A) coronagraph system. Th…
▽ More
The coronagraph is an instrument enables the investigation of faint features in the vicinity of the Sun, particularly coronal mass ejections (CMEs). So far coronagraphic observations have been mainly used to determine the geometric and kinematic parameters of CMEs. Here, we introduce a new method for the determination of CME temperature using a two filter (4025 A and 3934 A) coronagraph system. The thermal motion of free electrons in CMEs broadens the absorption lines in the optical spectra that are produced by the Thomson scattering of visible light originating in the photosphere, which affects the intensity ratio at two different wavelengths. Thus the CME temperature can be inferred from the intensity ratio measured by the two filter coronagraph system. We demonstrate the method by invoking the graduated cylindrical shell (GCS) model for the 3 dimensional CME density distribution and discuss its significance.
△ Less
Submitted 22 March, 2016;
originally announced March 2016.
-
Controlling Gaussian and mean curvatures at microscale by sublimation and condensation of smectic liquid crystals
Authors:
Dae Seok Kim,
Yun Jeong Cha,
Mun Ho Kim,
Oleg D. Lavrentovich,
Dong Ki Yoon
Abstract:
Soft materials with layered structure such as membranes, block copolymers, and smectics exhibit intriguing morphologies with nontrivial curvatures. We report on restructuring the Gaussian and mean curvatures of smectic A films with free surface in the process of sintering, i.e. resha** at elevated temperatures. The pattern of alternating patches of negative, zero, and positive mean curvature of…
▽ More
Soft materials with layered structure such as membranes, block copolymers, and smectics exhibit intriguing morphologies with nontrivial curvatures. We report on restructuring the Gaussian and mean curvatures of smectic A films with free surface in the process of sintering, i.e. resha** at elevated temperatures. The pattern of alternating patches of negative, zero, and positive mean curvature of the air-smectic interface has a profound effect on the rate of sublimation. As a result of sublimation, condensation, and restructuring, initially equilibrium smectic films with negative and zero Gaussian curvature are transformed into structures with pronounced positive Gaussian curvature of layers packing, seldom seen in samples obtained by cooling from the isotropic melt. The observed relationship between the curvatures, bulk elastic behaviour, and interfacial geometries in sintering of smectic liquid crystals paves the way for new approaches to control soft morphologies at micron and submicron scales.
△ Less
Submitted 24 November, 2015;
originally announced November 2015.
-
Bi-photon spectral correlation measurements from a silicon nanowire in the quantum and classical regimes
Authors:
Iman Jizan,
L. G. Helt,
Chunle Xiong,
Matthew J. Collins,
Duk-Yong Choi,
Chang Joon Chae,
Marco Liscidini,
M. J. Steel,
Benjamin J. Eggleton,
Alex S. Clark
Abstract:
The growing requirement for photon pairs with specific spectral correlations in quantum optics experiments has created a demand for fast, high resolution and accurate source characterization. A promising tool for such characterization uses the classical stimulated process, in which an additional seed laser stimulates photon generation yielding much higher count rates, as recently demonstrated for…
▽ More
The growing requirement for photon pairs with specific spectral correlations in quantum optics experiments has created a demand for fast, high resolution and accurate source characterization. A promising tool for such characterization uses the classical stimulated process, in which an additional seed laser stimulates photon generation yielding much higher count rates, as recently demonstrated for a $χ^{(2)}$ integrated source in A.~Eckstein \emph{et al.}, Laser Photon. Rev. \textbf{8}, L76 (2014). In this work we extend these results to $χ^{(3)}$ sources, demonstrating spectral correlation measurements via stimulated four-wave mixing for the first time in a integrated optical waveguide, namely a silicon nanowire. We directly confirm the speed-up due to higher count rates and demonstrate that additional resolution can be gained when compared to traditional coincidence measurements. As pump pulse duration can influence the degree of spectral entanglement, all of our measurements are taken for two different pump pulse widths. This allows us to confirm that the classical stimulated process correctly captures the degree of spectral entanglement regardless of pump pulse duration, and cements its place as an essential characterization method for the development of future quantum integrated devices.
△ Less
Submitted 2 December, 2014;
originally announced December 2014.
-
Anomalous dynamics of the extremely compressed magnetosphere during 21 January 2005 magnetic storm
Authors:
A. V. Dmitriev,
A. V. Suvorova,
J. -K. Chao,
C. B. Wang,
L. Rastaetter,
M. I. Panasyuk,
L. L. Lazutin,
A. S. Kovtyukh,
I. S. Veselovsky,
I. N. Myagkova
Abstract:
Dynamics of the dayside magnetosphere and proton radiation belt was analyzed during unusual magnetic storm on 21 January 2005. We have found that during the storm from 1712 to 2400 UT, the subsolar magnetopause was continuously located inside geosynchronous orbit due to strong compression. The compression was found to be extremely strong from 1846 to 2035 UT when the dense plasma of fast erupting…
▽ More
Dynamics of the dayside magnetosphere and proton radiation belt was analyzed during unusual magnetic storm on 21 January 2005. We have found that during the storm from 1712 to 2400 UT, the subsolar magnetopause was continuously located inside geosynchronous orbit due to strong compression. The compression was found to be extremely strong from 1846 to 2035 UT when the dense plasma of fast erupting filament produced the solar wind dynamic pressure Pd peaked up to >100 nPa and, in the first time, the upstream solar wind was observed at geosynchronous orbit during almost 2 hours. Under the extreme compression, the outer magnetosphere at L > 5 was pushed inward and the outer radiation belt particles with energies of several tens of keV moved earthward, became adiabatically accelerated and accumulated in the inner magnetosphere at L < 4 that produced the intensified ring current with an exceptionally long lifetime. The observations were compared with predictions of various empirical and first principles models. All the models failed to predict the magnetospheric dynamics under the extreme compression when the minimal magnetopause distance was estimated to be ~3 Re. The inconsistencies between the model predictions and observations might result from distortions of plasma measurements by extreme heliospheric conditions consisting in very fast solar wind streams (~1000 km/s) and intense fluxes of solar energetic particles. We speculated that anomalous dynamics of the magnetosphere could be well described by the models if the He abundance in the solar wind was assumed to be >20%, which is well appropriate for erupting filaments and which is in agreement with the upper 27% threshold for the He/H ratio obtained from Cluster measurements.
△ Less
Submitted 4 February, 2014;
originally announced February 2014.
-
Dependence of geosynchronous relativistic electron enhancements on geomagnetic parameters
Authors:
A. V. Dmitriev,
J. -K. Chao
Abstract:
Relativistic electron fluxes observed in geosynchronous orbit by GOES-8 in 1997 to 2000 were considered as a complex function of geomagnetic indices PC, Kp, and Dst as well as parameters of the magnetosphere size, subsolar Rs and terminator Rf magnetopause distances. A geosynchronous relativistic electron enhancement (GREE) is determined as daily maximal electron flux exceeding the upper root mean…
▽ More
Relativistic electron fluxes observed in geosynchronous orbit by GOES-8 in 1997 to 2000 were considered as a complex function of geomagnetic indices PC, Kp, and Dst as well as parameters of the magnetosphere size, subsolar Rs and terminator Rf magnetopause distances. A geosynchronous relativistic electron enhancement (GREE) is determined as daily maximal electron flux exceeding the upper root mean square deviation (RMSD) threshold of about 1500 (cm2s sr)-1. Comparison analysis of the GREE dynamics and geomagnetic conditions on the rising phase of current solar cycle revealed suppression of the relativistic electron enhancements by substantially increased strong geomagnetic activity in the solar maximum. Statistical consideration of a relationship between the GREEs and the geomagnetic parameters showed that the most important parameters controlling the geosynchronous relativistic electron enhancements were 4-day averaged Kp index, PC index and magnetopause termination distance Rf delayed respectively on 3 and 14 hours. Relatively high averaging time for Kp was explained by cumulative effect of substorm energy release in a gradual mechanism accelerating the relativistic electrons in the magnetosphere. Very short time delay for PC index was interpreted as intensification of a fast acceleration mechanism producing the GREEs during severe geomagnetic storms. Substantial increase of the PC index (PC>5) was founded as a sufficient condition for GREE occurrence. The fast response of the geosynchronous relativistic electron fluxes on the magnetosphere compression was explained by drift losses of the energetic electrons at the magnetopause which approaches the Earth during geomagnetic storms.
△ Less
Submitted 4 February, 2014;
originally announced February 2014.
-
Ultrafast zero balance of the oscillator-strength sum rule in graphene
Authors:
Jaeseok Kim,
Seong Chu Lim,
Seung ** Chae,
Inhee Maeng,
Younghwan Choi,
Soonyoung Cha,
Young Hee Lee,
Hyunyong Choi
Abstract:
Oscillator-strength sum rule in light-induced transitions is one general form of quantum-mechanical identities. Although this sum rule is well established in equilibrium photo-physics, an experimental corroboration for the validation of the sum rule in a nonequilibrium regime has been a long-standing unexplored question. The simple band structure of graphene is an ideal system for investigating th…
▽ More
Oscillator-strength sum rule in light-induced transitions is one general form of quantum-mechanical identities. Although this sum rule is well established in equilibrium photo-physics, an experimental corroboration for the validation of the sum rule in a nonequilibrium regime has been a long-standing unexplored question. The simple band structure of graphene is an ideal system for investigating this question due to the linear Dirac-like energy dispersion. Here, we employed both ultrafast terahertz and optical spectroscopy to directly monitor the transient oscillator-strength balancing between quasi-free low-energy oscillators and high-energy Fermi-edge ones. Upon photo-excitation of hot Dirac fermions, we observed that the ultrafast depletion of high-energy oscillators precisely complements the increased terahertz absorption oscillators. Our results may provide an experimental priori to understand, for example, the intrinsic free-carrier dynamics to the high-energy photo-excitation, responsible for optoelectronic operation such as graphene-based phototransistor or solar-energy harvesting devices.
△ Less
Submitted 10 September, 2013;
originally announced September 2013.
-
Enhancement of electron energy to multi-GeV regime by a dual-stage laser-wakefield accelerator pumped by petawatt laser pulses
Authors:
Hyung Taek Kim,
Ki Hong Pae,
Hyuk ** Cha,
I Jong Kim,
Tae Jun Yu,
Jae Hee Sung,
Seong Ku Lee,
Tae Moon Jeong,
Jongmin Lee
Abstract:
Laser wakefield acceleration offers the promise of a compact electron accelerator for generating a multi-GeV electron beam using the huge field gradient induced by an intense laser pulse, compared to conventional rf accelerators. However, the energy and quality of the electron beam from the laser wakefield accelerator have been limited by the power of the driving laser pulses and interaction prope…
▽ More
Laser wakefield acceleration offers the promise of a compact electron accelerator for generating a multi-GeV electron beam using the huge field gradient induced by an intense laser pulse, compared to conventional rf accelerators. However, the energy and quality of the electron beam from the laser wakefield accelerator have been limited by the power of the driving laser pulses and interaction properties in the target medium. Recent progress in laser technology has resulted in the realization of a petawatt (PW) femtosecond laser, which offers new capabilities for research on laser wakefield acceleration. Here, we present a significant increase in laser-driven electron energy to the multi-GeV level by utilizing a 30-fs, 1-PW laser system. In particular, a dual-stage laser wakefield acceleration scheme (injector and accelerator scheme) was applied to boost electron energies to over 3 GeV with a single PW laser pulse. Three-dimensional particle-in-cell simulations corroborate the multi-GeV electron generation from the dual-stage laser wakefield accelerator driven by PW laser pulses.
△ Less
Submitted 17 September, 2013; v1 submitted 16 July, 2013;
originally announced July 2013.
-
A Predictive Model of Geosynchronous Magnetopause Crossings
Authors:
A. Dmitriev,
A. Suvorova,
J. -K. Chao
Abstract:
We have developed a model predicting whether or not the magnetopause crosses geosynchronous orbit at given location for given solar wind pressure Psw, Bz component of interplanetary magnetic field (IMF) and geomagnetic conditions characterized by 1-min SYM-H index. The model is based on more than 300 geosynchronous magnetopause crossings (GMCs) and about 6000 minutes when geosynchronous satellites…
▽ More
We have developed a model predicting whether or not the magnetopause crosses geosynchronous orbit at given location for given solar wind pressure Psw, Bz component of interplanetary magnetic field (IMF) and geomagnetic conditions characterized by 1-min SYM-H index. The model is based on more than 300 geosynchronous magnetopause crossings (GMCs) and about 6000 minutes when geosynchronous satellites of GOES and LANL series are located in the magnetosheath (so-called MSh intervals) in 1994 to 2001. Minimizing of the Psw required for GMCs and MSh intervals at various locations, Bz and SYM-H allows describing both an effect of magnetopause dawn-dusk asymmetry and saturation of Bz influence for very large southward IMF. The asymmetry is strong for large negative Bz and almost disappears when Bz is positive. We found that the larger amplitude of negative SYM-H the lower solar wind pressure is required for GMCs. We attribute this effect to a depletion of the dayside magnetic field by a storm-time intensification of the cross-tail current. It is also found that the magnitude of threshold for Bz saturation increases with SYM-H index such that for small negative and positive SYM-H the effect of saturation diminishes. This supports an idea that enhanced thermal pressure of the magnetospheric plasma and ring current particles during magnetic storms results in the saturation of magnetic effect of the IMF Bz at the dayside magnetopause. A noticeable advantage of the model prediction capabilities in comparison with other magnetopause models makes the model useful for space weather predictions. Supplement : a program-code of the GMC-model
△ Less
Submitted 29 May, 2013;
originally announced May 2013.
-
Geosynchronous magnetopause crossings: necessary conditions
Authors:
A. Suvorova,
A. Dmitriev,
J. -K. Chao,
M. Thomsen,
Y. -H. Yang
Abstract:
The experimental data on GOES magnetic measurements and plasma measurements on LANL geosynchronous satellites is used for selection of 169 case events containing 638 geosynchronous magnetopause crossings (GMCs) in 1995 to 2001. We study the necessary conditions for the geosynchronous magnetopause crossings using scatter plot of the GMCs in the coordinate space of Psw versus Bz. In such representat…
▽ More
The experimental data on GOES magnetic measurements and plasma measurements on LANL geosynchronous satellites is used for selection of 169 case events containing 638 geosynchronous magnetopause crossings (GMCs) in 1995 to 2001. We study the necessary conditions for the geosynchronous magnetopause crossings using scatter plot of the GMCs in the coordinate space of Psw versus Bz. In such representation the upstream solar wind conditions demonstrate sharp envelope boundary under which no GMCs are occurred. The boundary has two strait horizontal branches where Bz does not influence on the magnetopause location. The first branch is located in the range of Psw=21 nPa for large positive Bz and is associated with an asymptotic regime of the pressure balance. The second branch asymptotically approaches to the range of Psw=4.8 nPa under very strong negative Bz and it is associated with a regime of the Bz influence saturation. We suggest that the saturation is caused by relatively high contribution of the magnetosphere thermal pressure into the pressure balance on the magnetopause. The intermediate region of the boundary for the moderate negative and small positive IMF Bz can be well approximated by a hyperbolic tangent function. We interpret the envelope boundary as a range of necessary upstream solar wind conditions required for GMC in the point on the magnetopause located mostly close to the Earth ("perigee" point). We obtain that the dipole tilt angle and dawn-dusk asymmetry influence on the "perigee" point location. We find that the aGSM latitude of this point depends linearly on the dipole tilt angle with the slope about -0.5. The aGSM longitude of the "perigee" point decreases with IMF Bz with a rate of about 2 angular minutes per 1 nT. An empirical model predicting the magnetopause crossing of the geosynchronous orbit in the "perigee" point is proposed.
△ Less
Submitted 24 October, 2011; v1 submitted 29 September, 2011;
originally announced September 2011.
-
Conformal symmetry and non-relativistic second order fluid dynamics
Authors:
**gyi Chao,
Thomas Schaefer
Abstract:
We study the constraints imposed by conformal symmetry on the equations of fluid dynamics at second order in gradients of the hydrodynamic variables. At zeroth order conformal symmetry implies a constraint on the equation of state, E=2/3 P, where E is the energy density and P is the pressure. At first order, conformal symmetry implies that the bulk viscosity must vanish. We show that at second ord…
▽ More
We study the constraints imposed by conformal symmetry on the equations of fluid dynamics at second order in gradients of the hydrodynamic variables. At zeroth order conformal symmetry implies a constraint on the equation of state, E=2/3 P, where E is the energy density and P is the pressure. At first order, conformal symmetry implies that the bulk viscosity must vanish. We show that at second order conformal invariance requires that two-derivative terms in the stress tensor must be traceless, and that it determines the relaxation of dissipative stresses to the Navier-Stokes form. We verify these results by solving the Boltzmann equation at second order in the gradient expansion. We find that only a subset of the terms allowed by conformal symmetry appear.
△ Less
Submitted 24 August, 2011;
originally announced August 2011.
-
Vortex Rings from Sphagnum Moss Capsules
Authors:
Emily S. Chang,
Joan Edwards,
Jung Ha Cha,
Sam Strassman,
Clara Hard,
Dwight L. Whitaker
Abstract:
Long distance wind dispersal requires small spores with low terminal velocities, which can be held aloft by turbulent air currents until they are deposited in suitable habitats for colonization. The inherent difficulty in dispersing spores by wind is that spores easily carried by wind are also rapidly decelerated when moving through still air. Thus the height of spore release is critical in determ…
▽ More
Long distance wind dispersal requires small spores with low terminal velocities, which can be held aloft by turbulent air currents until they are deposited in suitable habitats for colonization. The inherent difficulty in dispersing spores by wind is that spores easily carried by wind are also rapidly decelerated when moving through still air. Thus the height of spore release is critical in determining their range of dispersal. Vascular plants with wind dispersed spores use the height of the plant to lift spores into sufficient wind currents for dispersal, however non-vascular plants such as Sphagnum cannot grow sufficiently tall. These fluid dynamics videos show how exploding capsules of {\em Sphagnum} moss generate vortex rings to carry spores to heights above 10 cm with an initial velocity of 16 m s$^{-1}$. In contrast spores launched ballistically at these speeds through still air would travel only 2-7 mm.
△ Less
Submitted 15 October, 2010;
originally announced October 2010.
-
Map** local optical densities of states in silicon photonic structures with nanoscale electron spectroscopy
Authors:
Judy J. Cha,
Zongfu Yu,
Eric Smith,
Martin Couillard,
Shanhui Fan,
David A. Muller
Abstract:
Relativistic electrons in a structured medium generate radiative losses such as Cherenkov and transition radiation that act as a virtual light source, coupling to the photonic densities of states. The effect is most pronounced when the imaginary part of the dielectric function is zero, a regime where in a non-retarded treatment no loss or coupling can occur. Maps of the resultant energy losses a…
▽ More
Relativistic electrons in a structured medium generate radiative losses such as Cherenkov and transition radiation that act as a virtual light source, coupling to the photonic densities of states. The effect is most pronounced when the imaginary part of the dielectric function is zero, a regime where in a non-retarded treatment no loss or coupling can occur. Maps of the resultant energy losses as a sub-5nm electron probe scans across finite waveguide structures reveal spatial distributions of optical modes in a spectral domain ranging from near-infrared to far ultraviolet.
△ Less
Submitted 18 February, 2010;
originally announced February 2010.