-
Acoustic and optical variations during rapid downward motion episodes in the deep north-western Mediterranean Sea
Authors:
H. van Haren,
I. Taupier-Letage,
J. A. Aguilar,
A. Albert,
M. Anghinolfi,
G. Anton,
S. Anvar,
M. Ardid,
A. C. Assis Jesus,
T. Astraatmadja,
J. -J. Aubert,
R. Auer,
B. Baret,
S. Basa,
M. Bazzotti,
V. Bertin,
S. Biagi,
C. Bigongiari,
M. Bou-Cabof,
M. C. Bouwhuis,
A. Brown,
J. Brunner,
J. Busto,
F. Camarena,
A. Capone
, et al. (116 additional authors not shown)
Abstract:
An Acoustic Doppler Current Profiler (ADCP) was moored at the deep-sea site of the ANTARES neutrino telescope near Toulon, France, thus providing a unique opportunity to compare high-resolution acoustic and optical observations between 70 and 170 m above the sea bed at 2475 m. The ADCP measured downward vertical currents of magnitudes up to 0.03 m s-1 in late winter and early spring 2006. In the s…
▽ More
An Acoustic Doppler Current Profiler (ADCP) was moored at the deep-sea site of the ANTARES neutrino telescope near Toulon, France, thus providing a unique opportunity to compare high-resolution acoustic and optical observations between 70 and 170 m above the sea bed at 2475 m. The ADCP measured downward vertical currents of magnitudes up to 0.03 m s-1 in late winter and early spring 2006. In the same period, observations were made of enhanced levels of acoustic reflection, interpreted as suspended particles including zooplankton, by a factor of about 10 and of horizontal currents reaching 0.35 m s-1. These observations coincided with high light levels detected by the telescope, interpreted as increased bioluminescence. During winter 2006 deep dense-water formation occurred in the Ligurian subbasin, thus providing a possible explanation for these observations. However, the 10-20 days quasi-periodic episodes of high levels of acoustic reflection, light and large vertical currents continuing into the summer are not direct evidence of this process. It is hypothesized that the main process allowing for suspended material to be moved vertically later in the year is local advection, linked with topographic boundary current instabilities along the rim of the 'Northern Current'.
△ Less
Submitted 28 November, 2011;
originally announced November 2011.
-
A Layer Correlation technique for pion energy calibration at the 2004 ATLAS Combined Beam Test
Authors:
E. Abat,
J. M. Abdallah,
T. N. Addy,
P. Adragna,
M. Aharrouche,
A. Ahmad,
T. P. A. Akesson,
M. Aleksa,
C. Alexa,
K. Anderson,
A. Andreazza,
F. Anghinolfi,
A. Antonaki,
G. Arabidze,
E. Arik,
T. Atkinson,
J. Baines,
O. K. Baker,
D. Banfi,
S. Baron,
A. J. Barr,
R. Beccherle,
H. P. Beck,
B. Belhorma,
P. J. Bell
, et al. (460 additional authors not shown)
Abstract:
A new method for calibrating the hadron response of a segmented calorimeter is developed and successfully applied to beam test data. It is based on a principal component analysis of energy deposits in the calorimeter layers, exploiting longitudinal shower development information to improve the measured energy resolution. Corrections for invisible hadronic energy and energy lost in dead material in…
▽ More
A new method for calibrating the hadron response of a segmented calorimeter is developed and successfully applied to beam test data. It is based on a principal component analysis of energy deposits in the calorimeter layers, exploiting longitudinal shower development information to improve the measured energy resolution. Corrections for invisible hadronic energy and energy lost in dead material in front of and between the calorimeters of the ATLAS experiment were calculated with simulated Geant4 Monte Carlo events and used to reconstruct the energy of pions im**ing on the calorimeters during the 2004 Barrel Combined Beam Test at the CERN H8 area. For pion beams with energies between 20 GeV and 180 GeV, the particle energy is reconstructed within 3% and the energy resolution is improved by between 11% and 25% compared to the resolution at the electromagnetic scale.
△ Less
Submitted 12 May, 2011; v1 submitted 20 December, 2010;
originally announced December 2010.
-
The Evolution of FTK, a Real-Time Tracker for Hadron Collider Experiments
Authors:
A. Annovi,
M. Beretta,
P. Laurelli,
E. Bossini,
V. Cavasinni,
F. Crescioli,
M. Dell'Orso,
P. Giannetti,
M. Piendibene,
G. Punzi,
F. Sarri,
I. Vivarelli,
G. Volpi,
L. Sartori,
A. Boveia,
E. Brubaker,
F. Canelli,
M. Dunford,
A. Kapliy,
Y. K. Kim,
C. Melachrinos,
M. Shochet,
J. Tuggle,
H. DeBerg,
A. McCarn
, et al. (8 additional authors not shown)
Abstract:
We describe the architecture evolution of the highly-parallel dedicated processor FTK, which is driven by the simulation of LHC events at high luminosity (1034 cm-2 s-1). FTK is able to provide precise on-line track reconstruction for future hadronic collider experiments. The processor, organized in a two-tiered pipelined architecture, execute very fast algorithms based on the use of a large ban…
▽ More
We describe the architecture evolution of the highly-parallel dedicated processor FTK, which is driven by the simulation of LHC events at high luminosity (1034 cm-2 s-1). FTK is able to provide precise on-line track reconstruction for future hadronic collider experiments. The processor, organized in a two-tiered pipelined architecture, execute very fast algorithms based on the use of a large bank of pre-stored patterns of trajectory points (first tier) in combination with full resolution track fitting to refine pattern recognition and to determine off-line quality track parameters. We describe here how the high luminosity simulation results have produced a new organization of the hardware inside the FTK processor core.
△ Less
Submitted 20 November, 2009;
originally announced November 2009.
-
Development of FTK architecture: a fast hardware track trigger for the ATLAS detector
Authors:
A. Annovi,
M. Beretta,
E. Bossini,
A. Boveia,
E. Brubaker,
F. Canelli,
V. Cavasinni,
F. Crescioli,
H. DeBerg,
M. Dell'Orso,
M. Dunford,
M. Franklin,
P. Giannetti,
A. Kapliy,
Y. K. Kim,
N. Kimura,
P. Laurelli,
A. McCarn,
C. Melachrinos,
C. Mills,
M. Neubauer,
J. Proudfoot,
M. Piendibene,
G. Punzi,
F. Sarri
, et al. (8 additional authors not shown)
Abstract:
The Fast Tracker (FTK) is a proposed upgrade to the ATLAS trigger system that will operate at full Level-1 output rates and provide high quality tracks reconstructed over the entire detector by the start of processing in Level-2. FTK solves the combinatorial challenge inherent to tracking by exploiting the massive parallelism of Associative Memories (AM) that can compare inner detector hits to m…
▽ More
The Fast Tracker (FTK) is a proposed upgrade to the ATLAS trigger system that will operate at full Level-1 output rates and provide high quality tracks reconstructed over the entire detector by the start of processing in Level-2. FTK solves the combinatorial challenge inherent to tracking by exploiting the massive parallelism of Associative Memories (AM) that can compare inner detector hits to millions of pre-calculated patterns simultaneously. The tracking problem within matched patterns is further simplified by using pre-computed linearized fitting constants and leveraging fast DSP's in modern commercial FPGA's. Overall, FTK is able to compute the helix parameters for all tracks in an event and apply quality cuts in approximately one millisecond. By employing a pipelined architecture, FTK is able to continuously operate at Level-1 rates without deadtime. The system design is defined and studied using ATLAS full simulation. Reconstruction quality is evaluated for single muon events with zero pileup, as well as WH events at the LHC design luminosity. FTK results are compared with the tracking capability of an offline algorithm.
△ Less
Submitted 6 October, 2009;
originally announced October 2009.
-
A PMT-Block test bench
Authors:
P. Adragna,
A. Antonaki,
I. Boudagov,
V. Cavasinni,
D. Costanzo,
T. Del Prete,
A. Dotti,
D. Fassouliotis,
V. Giakoumopoulou,
N. Giokaris,
C. Guicheney,
E. Karali,
J. Khubua,
M. Lebessi,
A. Lupi,
A. Manoussakis,
E. Mazzoni,
I. Minashvili,
M. Morphi,
G. F. Pagani,
R. Paoletti,
D. Rizzi,
C. Roda,
F. Sarri,
Ath. Staveris-Polykalas
, et al. (8 additional authors not shown)
Abstract:
The front-end electronics of the ATLAS hadronic calorimeter (Tile Cal) is housed in a unit, called {\it PMT-Block}. The PMT-Block is a compact instrument comprising a light mixer, a PMT together with its divider and a {\it 3-in-1} card, which provides sha**, amplification and integration for the signals. This instrument needs to be qualified before being assembled on the detector. A PMT-Block…
▽ More
The front-end electronics of the ATLAS hadronic calorimeter (Tile Cal) is housed in a unit, called {\it PMT-Block}. The PMT-Block is a compact instrument comprising a light mixer, a PMT together with its divider and a {\it 3-in-1} card, which provides sha**, amplification and integration for the signals. This instrument needs to be qualified before being assembled on the detector. A PMT-Block test bench has been developed for this purpose. This test bench is a system which allows fast, albeit accurate enough, measurements of the main properties of a complete PMT-Block. The system, both hardware and software, and the protocol used for the PMT-Blocks characterisation are described in detail in this report. The results obtained in the test of about 10000 PMT-Blocks needed for the instrumentation of the ATLAS (LHC-CERN) hadronic Tile Calorimeter are also reported.
△ Less
Submitted 8 May, 2006;
originally announced May 2006.