Showing 1–10 of 10 results for author: Caspi, S

A Strategic Approach to Advance Magnet Technology for Next Generation Colliders

Authors: G. Ambrosio, K. Amm, M. Anerella, G. Apollinari, D. Arbelaez, B. Auchmann, S. Balachandran, M. Baldini, A. Ballarino, S. Barua, E. Barzi, A. Baskys, C. Bird, J. Boerme, E. Bosque, L. Brouwer, S. Caspi, N. Cheggour, G. Chlachidze, L. Cooley, D. Davis, D. Dietderich, J. DiMarco, L. English, L. Garcia Fajardo , et al. (52 additional authors not shown)

Abstract: Colliders are built on a foundation of superconducting magnet technology that provides strong dipole magnets to maintain the beam orbit and strong focusing magnets to enable the extraordinary luminosity required to probe physics at the energy frontier. The dipole magnet strength plays a critical role in dictating the energy reach of a collider, and the superconducting magnets are arguably the domi… ▽ More Colliders are built on a foundation of superconducting magnet technology that provides strong dipole magnets to maintain the beam orbit and strong focusing magnets to enable the extraordinary luminosity required to probe physics at the energy frontier. The dipole magnet strength plays a critical role in dictating the energy reach of a collider, and the superconducting magnets are arguably the dominant cost driver for future collider facilities. As the community considers opportunities to explore new energy frontiers, the importance of advanced magnet technology - both in terms of magnet performance and in the magnet technology's potential for cost reduction - is evident, as the technology status is essential for informed decisions on targets for physics reach and facility feasibility. △ Less

Submitted 26 March, 2022; originally announced March 2022.

Comments: contribution to Snowmass 2021

Modeling heat transfer from quench protection heaters to superconducting cables in Nb3Sn magnets

Authors: T. Salmi, D. Arbelaez, S. Caspi, H. Felice, S. Prestemon, G. Chlachidze, H. H. J. ten Kate

Abstract: We use a recently developed quench protection heater modeling tool for an analysis of heater delays in superconducting high-field Nb3Sn accelerator magnets. The results suggest that the calculated delays are consistent with experimental data, and show how the heater delay depends on the main heater design parameters. We use a recently developed quench protection heater modeling tool for an analysis of heater delays in superconducting high-field Nb3Sn accelerator magnets. The results suggest that the calculated delays are consistent with experimental data, and show how the heater delay depends on the main heater design parameters. △ Less

Submitted 16 January, 2014; originally announced January 2014.

Comments: 8 pages, Contribution to WAMSDO 2013: Workshop on Accelerator Magnet, Superconductor, Design and Optimization; 15 - 16 Jan 2013, CERN, Geneva, Switzerland

Journal ref: CERN Yellow Report CERN-2013-006, pp.30-37

Conceptual Design of the International Axion Observatory (IAXO)

Authors: E. Armengaud, F. T. Avignone, M. Betz, P. Brax, P. Brun, G. Cantatore, J. M. Carmona, G. P. Carosi, F. Caspers, S. Caspi, S. A. Cetin, D. Chelouche, F. E. Christensen, A. Dael, T. Dafni, M. Davenport, A. V. Derbin, K. Desch, A. Diago, B. Döbrich, I. Dratchnev, A. Dudarev, C. Eleftheriadis, G. Fanourakis, E. Ferrer-Ribas , et al. (63 additional authors not shown)

Abstract: The International Axion Observatory (IAXO) will be a forth generation axion helioscope. As its primary physics goal, IAXO will look for axions or axion-like particles (ALPs) originating in the Sun via the Primakoff conversion of the solar plasma photons. In terms of signal-to-noise ratio, IAXO will be about 4-5 orders of magnitude more sensitive than CAST, currently the most powerful axion heliosc… ▽ More The International Axion Observatory (IAXO) will be a forth generation axion helioscope. As its primary physics goal, IAXO will look for axions or axion-like particles (ALPs) originating in the Sun via the Primakoff conversion of the solar plasma photons. In terms of signal-to-noise ratio, IAXO will be about 4-5 orders of magnitude more sensitive than CAST, currently the most powerful axion helioscope, reaching sensitivity to axion-photon couplings down to a few $\times 10^{-12}$ GeV$^{-1}$ and thus probing a large fraction of the currently unexplored axion and ALP parameter space. IAXO will also be sensitive to solar axions produced by mechanisms mediated by the axion-electron coupling $g_{ae}$ with sensitivity $-$for the first time$-$ to values of $g_{ae}$ not previously excluded by astrophysics. With several other possible physics cases, IAXO has the potential to serve as a multi-purpose facility for generic axion and ALP research in the next decade. In this paper we present the conceptual design of IAXO, which follows the layout of an enhanced axion helioscope, based on a purpose-built 20m-long 8-coils toroidal superconducting magnet. All the eight 60cm-diameter magnet bores are equipped with focusing x-ray optics, able to focus the signal photons into $\sim 0.2$ cm$^2$ spots that are imaged by ultra-low-background Micromegas x-ray detectors. The magnet is built into a structure with elevation and azimuth drives that will allow for solar tracking for $\sim$12 h each day. △ Less

Submitted 14 January, 2014; originally announced January 2014.

Comments: 47 pages, submitted to JINST

Journal ref: JINST 9 (2014) T05002

IAXO - The International Axion Observatory

Authors: J. K. Vogel, F. T. Avignone, G. Cantatore, J. M. Carmona, S. Caspi, S. A. Cetin, F. E. Christensen, A. Dael, T. Dafni, M. Davenport, A. V. Derbin, K. Desch, A. Diago, A. Dudarev, C. Eleftheriadis, G. Fanourakis, E. Ferrer-Ribas, J. Galan, J. A. Garcia, J. G. Garza, T. Geralis, B. Gimeno, I. Giomataris, S. Gninenko, H. Gomez , et al. (39 additional authors not shown)

Abstract: The International Axion Observatory (IAXO) is a next generation axion helioscope aiming at a sensitivity to the axion-photon coupling of a few 10^{-12} GeV^{-1}, i.e. 1-1.5 orders of magnitude beyond sensitivities achieved by the currently most sensitive axion helioscope, the CERN Axion Solar Telescope (CAST). Crucial factors in improving the sensitivity for IAXO are the increase of the magnetic f… ▽ More The International Axion Observatory (IAXO) is a next generation axion helioscope aiming at a sensitivity to the axion-photon coupling of a few 10^{-12} GeV^{-1}, i.e. 1-1.5 orders of magnitude beyond sensitivities achieved by the currently most sensitive axion helioscope, the CERN Axion Solar Telescope (CAST). Crucial factors in improving the sensitivity for IAXO are the increase of the magnetic field volume together with the extensive use of x-ray focusing optics and low background detectors, innovations already successfully tested at CAST. Electron-coupled axions invoked to explain the white dwarf cooling, relic axions, and a large variety of more generic axion-like particles (ALPs) along with other novel excitations at the low-energy frontier of elementary particle physics could provide additional physics motivation for IAXO. △ Less

Submitted 13 February, 2013; originally announced February 2013.

Comments: 6 pages, 1 figure, Contribution to the 8th Patras Workshop on Axions, WIMPs and WISPs, Chicago, IL, USA, 2012

LBNL high field core program

Authors: S. Caspi

Abstract: The LBNL Superconducting Magnet Group mission is to develop and establish the technologies associated with high field superconducting magnets in order to provide cost-effective options for the next-generation high-energy physics accelerators. The research effort is part of the group core program and the development is part of the LARP program discussed elsewhere at this workshop. The LBNL Superconducting Magnet Group mission is to develop and establish the technologies associated with high field superconducting magnets in order to provide cost-effective options for the next-generation high-energy physics accelerators. The research effort is part of the group core program and the development is part of the LARP program discussed elsewhere at this workshop. △ Less

Submitted 9 August, 2011; originally announced August 2011.

Comments: 4 pages, contribution to the EuCARD-AccNet-EuroLumi Workshop: The High-Energy Large Hadron Collider, Malta, 14 -- 16 Oct 2010

Journal ref: CERN Yellow Report CERN-2011-003, pp. 37-40

A Cost-Effective Design for a Neutrino Factory

Authors: J. S. Berg, S. A. Bogacz, S. Caspi, J. Cobb, R. C. Fernow, J. C. Gallardo, S. Kahn, H. Kirk, D. Neuffer, R. B. Palmer, K. Paul, H. Witte, M. Zisman

Abstract: There have been active efforts in the U.S., Europe, and Japan on the design of a Neutrino Factory. This type of facility produces intense beams of neutrinos from the decay of muons in a high energy storage ring. In the U.S., a second detailed Feasibility Study (FS2) for a Neutrino Factory was completed in 2001. Since that report was published, new ideas in bunching, cooling and acceleration of m… ▽ More There have been active efforts in the U.S., Europe, and Japan on the design of a Neutrino Factory. This type of facility produces intense beams of neutrinos from the decay of muons in a high energy storage ring. In the U.S., a second detailed Feasibility Study (FS2) for a Neutrino Factory was completed in 2001. Since that report was published, new ideas in bunching, cooling and acceleration of muon beams have been developed. We have incorporated these ideas into a new facility design, which we designate as Study 2B (ST2B), that should lead to significant cost savings over the FS2 design. △ Less

Submitted 10 November, 2005; originally announced November 2005.

Comments: 46 pages, 38 figures; to be submitted to Physical Review Special Topics: Accelerators and Beams

Report number: BNL-75054-2005-JA; MUC-NOTES-327

Journal ref: Phys.Rev.ST Accel.Beams 9:011001,2006

DNA - Nanoelectronics: Realization of a Single Electron Tunneling Transistor and a Quantum Bit Element

Authors: Eshel Ben-Jacob, Ziv Hermon, Shay Caspi

Abstract: Based on the understanding that chemical bonds can act as tunnel junctions in the Coulomb blockade regime, and on the technical ability to coat a DNA strand with metal, we suggest that DNA can be used to built logical devices. We discuss two explicit examples: a Single Electron Tunneling Transistor (SET) and a Quantum Bit Element. These devices would be literally in the nano-meter scale and woul… ▽ More Based on the understanding that chemical bonds can act as tunnel junctions in the Coulomb blockade regime, and on the technical ability to coat a DNA strand with metal, we suggest that DNA can be used to built logical devices. We discuss two explicit examples: a Single Electron Tunneling Transistor (SET) and a Quantum Bit Element. These devices would be literally in the nano-meter scale and would be able to operate at room temperature. In addition they would be identical to each other, highly stable and would have a self assembly property. △ Less

Submitted 30 August, 1998; originally announced August 1998.

Comments: 3 pages, RevTex, 4 PostScript figures

Do Topological Charge Solitons Participate in DNA Activity?

Authors: Ziv Hermon, Shay Caspi, Eshel Ben-Jacob

Abstract: We present a novel electromagnetic model of DNA molecules, in which the P-bonds act as tunnel junctions and the H-bonds as capacitors. Excess charge in the model gives rise to two coupled modified sine-Gordon equations, which admit topological solitonic excitations. We study the dynamics of the solitons, their effect on the DNA transport properties, and comment about their role in the DNA functi… ▽ More We present a novel electromagnetic model of DNA molecules, in which the P-bonds act as tunnel junctions and the H-bonds as capacitors. Excess charge in the model gives rise to two coupled modified sine-Gordon equations, which admit topological solitonic excitations. We study the dynamics of the solitons, their effect on the DNA transport properties, and comment about their role in the DNA functioning. We propose specific experiments in order to test our predictions. △ Less

Submitted 15 December, 1997; originally announced December 1997.

Comments: 5 pages, RevTex, 3 PostScript + 1 encapsulated PostScript figures

Muon Collider Design

Authors: R. Palmer, A. Sessler, A. Skrinsky, A. Tollestrup, A. Baltz, S. Caspi, P. Chen, W-H. Cheng, Y. Cho, D. Cline, E. Courant, R. Fernow, J. Gallardo, A. Garren, H. Gordon, M. Green, R. Gupta, A. Hershcovitch, C. Johnstone, S. Kahn, H. Kirk, T. Kycia, Y. Lee, D. Lissauer, A. Luccio , et al. (34 additional authors not shown)

Abstract: Muon Colliders have unique technical and physics advantages and disadvantages when compared with both hadron and electron machines. They should thus be regarded as complementary. Parameters are given of 4 TeV and 0.5 TeV high luminosity μ^+ μ^- colliders, and of a 0.5 TeV lower luminosity demonstration machine. We discuss the various systems in such muon colliders, starting from the proton accel… ▽ More Muon Colliders have unique technical and physics advantages and disadvantages when compared with both hadron and electron machines. They should thus be regarded as complementary. Parameters are given of 4 TeV and 0.5 TeV high luminosity μ^+ μ^- colliders, and of a 0.5 TeV lower luminosity demonstration machine. We discuss the various systems in such muon colliders, starting from the proton accelerator needed to generate the muons and proceeding through muon cooling, acceleration and storage in a collider ring. Detector background, polarization, and nonstandard operating conditions are discussed. △ Less

Submitted 9 April, 1996; originally announced April 1996.

Comments: 42 pages TeX file (aipproc style), 25 postscript figures. Submitted to the Proceedings of the Symposium on Physics Potential and Development of $μ^+ μ^-$ Colliders, San Francisco, CA Dec 13-15, 1995. Edited by D. Cline and D. Sanders

Report number: BNL# 62949

Journal ref: Nucl.Phys.Proc.Suppl.51A:61-84,1996

Beam Dynamics problems in a muon collider

Authors: R. B. Palmer, J. C. Gallardo, R. C. Fernow, H. Kirk, I. Stumer, Y. Y. Lee, M. Syphers, Y. Torun, D. Winn, D. Neuffer, Y. Cho, J. Norem, N. Mokhov, R. Noble, A. Tollestrup, R. Scanlan, S. Caspi, O. Napoly

Abstract: We discuss the various beam dynamics problems in muon collider systems, starting from the proton accelerator needed to generate the muon beams and proceeding through the muon storage ring. We discuss the various beam dynamics problems in muon collider systems, starting from the proton accelerator needed to generate the muon beams and proceeding through the muon storage ring. △ Less

Submitted 30 March, 1995; originally announced March 1995.

Comments: Latex, 11 pages, submitted to ICFA Beam Dynamics Newsletter

Journal ref: ICFA Beam Dyn.Newslett.8:27-33,1995