Showing 1–5 of 5 results for author: Cao, H T

Continuous gravitational waves in the lab: recovering audio signals with a table-top optical microphone

Authors: James W. Gardner, Hannah Middleton, Changrong Liu, Andrew Melatos, Robin Evans, William Moran, Deeksha Beniwal, Huy Tuong Cao, Craig Ingram, Daniel Brown, Sebastian Ng

Abstract: Gravitational-wave observatories around the world are searching for continuous waves: persistent signals from sources such as spinning neutron stars. These searches use sophisticated statistical techniques to look for weak signals in noisy data. In this paper, we demonstrate these techniques using a table-top model gravitational-wave detector: a Michelson interferometer where sound is used as an a… ▽ More Gravitational-wave observatories around the world are searching for continuous waves: persistent signals from sources such as spinning neutron stars. These searches use sophisticated statistical techniques to look for weak signals in noisy data. In this paper, we demonstrate these techniques using a table-top model gravitational-wave detector: a Michelson interferometer where sound is used as an analog for gravitational waves. Using signal processing techniques from continuous-wave searches, we demonstrate the recovery of tones with constant and wandering frequencies. We also explore the use of the interferometer as a teaching tool for educators in physics and electrical engineering by using it as an "optical microphone" to capture music and speech. A range of filtering techniques used to recover signals from noisy data are detailed in the Supplementary Material. Here, we present highlights of our results using a combined notch plus Wiener filter and the statistical log minimum mean-square error (logMMSE) estimator. Using these techniques, we easily recover recordings of simple chords and drums, but complex music and speech are more challenging. This demonstration can be used by educators in undergraduate laboratories and can be adapted for communicating gravitational-wave and signal-processing topics to non-specialist audiences. △ Less

Submitted 10 January, 2022; originally announced January 2022.

Comments: 13 pages, 8 figures. Supplementary Material: 15 pages, 6 figures. To be published in the American Journal of Physics (accepted December 2021)

Piezo-deformable Mirrors for Active Mode Matching in Advanced LIGO

Authors: Varun Srivastava, Georgia Mansell, Camille Makarem, Minkyun Noh, Richard Abbott, Stefan Ballmer, GariLynn Billingsley, Aidan Brooks, Huy Tuong Cao, Peter Fritschel, Don Griffith, Wenxuan Jia, Marie Kasprzack, Myron MacInnis, Sebastian Ng, Luis Sanchez, Calum Torrie, Peter Veitch, Fabrice Matichard

Abstract: The detectors of the laser interferometer gravitational-wave observatory (LIGO) are broadly limited by the quantum noise and rely on the injection of squeezed states of light to achieve their full sensitivity. Squeezing improvement is limited by mode mismatch between the elements of the squeezer and the interferometer. In the current LIGO detectors, there is no way to actively mitigate this mode m… ▽ More The detectors of the laser interferometer gravitational-wave observatory (LIGO) are broadly limited by the quantum noise and rely on the injection of squeezed states of light to achieve their full sensitivity. Squeezing improvement is limited by mode mismatch between the elements of the squeezer and the interferometer. In the current LIGO detectors, there is no way to actively mitigate this mode mismatch. This paper presents a new deformable mirror for wavefront control that meets the active mode matching requirements of advanced LIGO. The active element is a piezo-electric transducer, which actuates on the radius of curvature of a 5 mm thick mirror via an axisymmetric flexure. The operating range of the deformable mirror is 120+-8 mD in vacuum, with an additional 200 mD adjustment range accessible out of vacuum. The scattering into higher-order modes is measured to be <0.2% over the nominal beam radius. These piezo-deformable mirrors meet the stringent noise and vacuum requirements of advanced LIGO and will be used for the next observing run (O4) to control the mode-matching between the squeezer and the interferometer. △ Less

Submitted 25 January, 2022; v1 submitted 1 October, 2021; originally announced October 2021.

Differential wavefront sensing and control using radio-frequency optical demodulation

Authors: Daniel D. Brown, Huy Tuong Cao, Alexei Ciobanu, Peter Veitch, David Ottaway

Abstract: Differential wavefront sensing is an essential technique for optimising the performance of many precision interferometric experiments. Perhaps the most extensive application of this is for alignment sensing using radio-frequency beats measured with quadrant photodiodes. Here we present a new technique that uses optical demodulation to measure such optical beats at significantly higher resolutions… ▽ More Differential wavefront sensing is an essential technique for optimising the performance of many precision interferometric experiments. Perhaps the most extensive application of this is for alignment sensing using radio-frequency beats measured with quadrant photodiodes. Here we present a new technique that uses optical demodulation to measure such optical beats at significantly higher resolutions using commercial laboratory equipment. We experimentally demonstrate that the images captured can be digitally processed to generate wavefront error signals and use these in a closed loop control system for correct wavefront errors for alignment and mode-matching a beam into an optical cavity to 99.9\%. This experiment paves the way for the correction of even higher order errors when paired with higher order wavefront actuators. Such a sensing scheme could find use in optimizing complex interferometers consisting of coupled cavities, such as those found in gravitational wave detectors, or simply just for sensing higher order wavefront errors in heterodyne interferometric table-top experiments. △ Less

Submitted 25 February, 2021; originally announced March 2021.

Point absorbers in Advanced LIGO

Authors: Aidan F. Brooks, Gabriele Vajente, Hiro Yamamoto, Rich Abbott, Carl Adams, Rana X. Adhikari, Alena Ananyeva, Stephen Appert, Koji Arai, Joseph S. Areeda, Yasmeen Asali, Stuart M. Aston, Corey Austin, Anne M. Baer, Matthew Ball, Stefan W. Ballmer, Sharan Banagiri, David Barker, Lisa Barsotti, Jeffrey Bartlett, Beverly K. Berger, Joseph Betzwieser, Dripta Bhattacharjee, Garilynn Billingsley, Sebastien Biscans , et al. (176 additional authors not shown)

Abstract: Small, highly absorbing points are randomly present on the surfaces of the main interferometer optics in Advanced LIGO. The resulting nano-meter scale thermo-elastic deformations and substrate lenses from these micron-scale absorbers significantly reduces the sensitivity of the interferometer directly though a reduction in the power-recycling gain and indirect interactions with the feedback contro… ▽ More Small, highly absorbing points are randomly present on the surfaces of the main interferometer optics in Advanced LIGO. The resulting nano-meter scale thermo-elastic deformations and substrate lenses from these micron-scale absorbers significantly reduces the sensitivity of the interferometer directly though a reduction in the power-recycling gain and indirect interactions with the feedback control system. We review the expected surface deformation from point absorbers and provide a pedagogical description of the impact on power build-up in second generation gravitational wave detectors (dual-recycled Fabry-Perot Michelson interferometers). This analysis predicts that the power-dependent reduction in interferometer performance will significantly degrade maximum stored power by up to 50% and hence, limit GW sensitivity, but suggests system wide corrections that can be implemented in current and future GW detectors. This is particularly pressing given that future GW detectors call for an order of magnitude more stored power than currently used in Advanced LIGO in Observing Run 3. We briefly review strategies to mitigate the effects of point absorbers in current and future GW wave detectors to maximize the success of these enterprises. △ Less

Submitted 25 March, 2021; v1 submitted 14 January, 2021; originally announced January 2021.

Comments: 49 pages, 16 figures. -V2: typographical errors in equations B9 and B10 were corrected (stray exponent of "h" was removed). Caption of Figure 9 was corrected to indicate that 40mW was used for absorption in the model, not 10mW as incorrectly indicated in V1

Report number: Report-no: P1900287

An optical lock-in camera for advanced gravitational wave interferometers

Authors: Huy Tuong Cao, Daniel D. Brown, Peter Veitch, David J. Ottaway

Abstract: Knowledge of the intensity and phase profiles of spectral components in a coherent optical field is critical for a wide range of high-precision optical applications. One of these is interferometric gravitational wave detectors, which rely on such fields for precise control of the experiment. Here we demonstrate a new device, an \textit{optical lock-in camera}, and highlight how they can be used wi… ▽ More Knowledge of the intensity and phase profiles of spectral components in a coherent optical field is critical for a wide range of high-precision optical applications. One of these is interferometric gravitational wave detectors, which rely on such fields for precise control of the experiment. Here we demonstrate a new device, an \textit{optical lock-in camera}, and highlight how they can be used within a gravitational wave interferometer to directly image fields at a higher spatial and temporal resolution than previously possible. This improvement is achieved using a Pockels cell as a fast optical switch which transforms each pixel on a sCMOS array into an optical lock-in amplifier. We demonstrate that the optical lock-in camera can image fields with 2~Mpx resolution at 10~Hz with a sensitivity of -62~dBc when averaged over 2s. △ Less

Submitted 10 July, 2019; originally announced July 2019.