-
Prediction of Performance and Turbulence in ITER Burning Plasmas via Nonlinear Gyrokinetic Profile Prediction
Authors:
N. T. Howard,
P. Rodriguez-Fernandez,
C. Holland,
J. Candy
Abstract:
Burning plasma performance, transport, and the effect of hydrogen isotope on confinement has been predicted for ITER baseline scenario (IBS) conditions using nonlinear gyrokinetic profile predictions. Accelerated by surrogate modeling [P. Rodriguez-Fernandez NF 2022], high fidelity, nonlinear gyrokinetic simulations performed with the CGYRO code [J. Candy JCP 2016], were used to predict profiles o…
▽ More
Burning plasma performance, transport, and the effect of hydrogen isotope on confinement has been predicted for ITER baseline scenario (IBS) conditions using nonlinear gyrokinetic profile predictions. Accelerated by surrogate modeling [P. Rodriguez-Fernandez NF 2022], high fidelity, nonlinear gyrokinetic simulations performed with the CGYRO code [J. Candy JCP 2016], were used to predict profiles of Ti, Te, and ne while including the effects of alpha heating, auxiliary power, collisional energy exchange, and radiation losses. Predicted profiles and resulting energy confinement are found to produce fusion power and gain that are approximately consistent with mission goals (Pfusion = 500MW at Q=10) for the baseline scenario and exhibit energy confinement that is within 1 sigma of the H-mode energy confinement scaling. The power of the surrogate modeling technique is demonstrated through the prediction of alternative ITER scenarios with reduced computational cost. These scenarios include conditions with maximized fusion gain and an investigation of potential Resonant Magnetic Perturbation effects on performance with a minimal number of gyrokinetic profile iterations required. These predictions highlight the stiff ITG nature of the core turbulence predicted in the ITER baseline and demonstrate that Q>17 conditions may be accessible by reducing auxiliary input power while operating in IBS conditions. Prediction of full kinetic profiles allowed for the projection of hydrogen isotope effects around ITER baseline conditions. The gyrokinetic fuel ion species was varied from H, D, and 50/50 D-T and kinetic profiles were predicted. Results indicate that a weak or negligible isotope effect will be observed to arise from core turbulence in ITER baseline scenario conditions. The resulting energy confinement, turbulence, and density peaking, and the implications for ITER operations will be discussed.
△ Less
Submitted 25 April, 2024;
originally announced April 2024.
-
Core performance predictions in projected SPARC first-campaign plasmas with nonlinear CGYRO
Authors:
P. Rodriguez-Fernandez,
N. T. Howard,
A. Saltzman,
L. Shoji,
T. Body,
D. J. Battaglia,
J. W. Hughes,
J. Candy,
G. M. Staebler,
A. J. Creely
Abstract:
This work characterizes the core transport physics of SPARC early-campaign plasmas using the PORTALS-CGYRO framework. Empirical modeling of SPARC plasmas with L-mode confinement indicates an ample window of breakeven (Q>1) without the need of H-mode operation. Extensive modeling of multi-channel (electron energy, ion energy and electron particle) flux-matched conditions with the nonlinear CGYRO co…
▽ More
This work characterizes the core transport physics of SPARC early-campaign plasmas using the PORTALS-CGYRO framework. Empirical modeling of SPARC plasmas with L-mode confinement indicates an ample window of breakeven (Q>1) without the need of H-mode operation. Extensive modeling of multi-channel (electron energy, ion energy and electron particle) flux-matched conditions with the nonlinear CGYRO code for turbulent transport coupled to the macroscopic plasma evolution using PORTALS reveal that the maximum fusion performance to be attained will be highly dependent on the near-edge pressure. Stiff core transport conditions are found, particularly when fusion gain approaches unity, and predicted density peaking is found to be in line with empirical databases of particle source-free H-modes. Impurity optimization is identified as a potential avenue to increase fusion performance while enabling core-edge integration. Extensive validation of the quasilinear TGLF model builds confidence in reduced-model predictions. The implications of projecting L-mode performance to high-performance and burning-plasma devices is discussed, together with the importance of predicting edge conditions.
△ Less
Submitted 8 May, 2024; v1 submitted 22 March, 2024;
originally announced March 2024.
-
Enhancing predictive capabilities in fusion burning plasmas through surrogate-based optimization in core transport solvers
Authors:
P. Rodriguez-Fernandez,
N. T. Howard,
A. Saltzman,
S. Kantamneni,
J. Candy,
C. Holland,
M. Balandat,
S. Ament,
A. E. White
Abstract:
This work presents the PORTALS framework, which leverages surrogate modeling and optimization techniques to enable the prediction of core plasma profiles and performance with nonlinear gyrokinetic simulations at significantly reduced cost, with no loss of accuracy. The efficiency of PORTALS is benchmarked against standard methods, and its full potential is demonstrated on a unique, simultaneous 5-…
▽ More
This work presents the PORTALS framework, which leverages surrogate modeling and optimization techniques to enable the prediction of core plasma profiles and performance with nonlinear gyrokinetic simulations at significantly reduced cost, with no loss of accuracy. The efficiency of PORTALS is benchmarked against standard methods, and its full potential is demonstrated on a unique, simultaneous 5-channel (electron temperature, ion temperature, electron density, impurity density and angular rotation) prediction of steady-state profiles in a DIII-D ITER Similar Shape plasma with GPU-accelerated, nonlinear CGYRO. This paper also provides general guidelines for accurate performance predictions in burning plasmas and the impact of transport modeling in fusion pilot plants studies.
△ Less
Submitted 9 April, 2024; v1 submitted 19 December, 2023;
originally announced December 2023.
-
Stable Deuterium-Tritium burning plasmas with improved confinement in the presence of energetic-ion instabilities
Authors:
Jeronimo Garcia,
Yevgen Kazakov,
Rui Coelho,
Mykola Dreval,
Elena de la Luna,
Emilia R. Solano,
Ziga Stancar,
Jacobo Varela,
Matteo Baruzzo,
Emily Belli,
Phillip J. Bonofiglo,
Jeff Candy,
Costanza F. Maggi,
Joelle Mailloux,
Samuele Mazzi,
Jef Ongena,
Michal Poradzinski,
Juan R. Ruiz,
Sergei Sharapov,
David Zarzoso,
JET contributors
Abstract:
Providing stable and clean energy sources is a necessity for the increasing demands of humanity. Energy produced by fusion reactions, in particular in tokamaks, is a promising path towards that goal. However, there is little experience with plasmas under conditions close to those expected in future fusion reactors, because it requires the fusion of Deuterium (D) and Tritium (T), while most of the…
▽ More
Providing stable and clean energy sources is a necessity for the increasing demands of humanity. Energy produced by fusion reactions, in particular in tokamaks, is a promising path towards that goal. However, there is little experience with plasmas under conditions close to those expected in future fusion reactors, because it requires the fusion of Deuterium (D) and Tritium (T), while most of the experiments are currently performed in pure D. After more than 20 years, the Joint European Torus (JET) has carried out new D-T experiments with the aim of exploring the unique characteristics of burning D-T plasmas, such as the presence of highly energetic ions. A new stable, high confinement and impurity-free D-T regime, with strong reduction of energy losses with respect to D, has been found. Multiscale physics mechanisms critically determine the thermal confinement and the fusion power yield. These crucial achievements importantly contribute to the establishment of fusion energy generation as an alternative to fossil fuels.
△ Less
Submitted 17 January, 2024; v1 submitted 21 September, 2023;
originally announced September 2023.
-
Optimization and Portability of a Fusion OpenACC-based FORTRAN HPC Code from NVIDIA to AMD GPUs
Authors:
Igor Sfiligoi,
Emily A. Belli,
Jeff Candy,
Reuben D. Budiardja
Abstract:
NVIDIA has been the main provider of GPU hardware in HPC systems for over a decade. Most applications that benefit from GPUs have thus been developed and optimized for the NVIDIA software stack. Recent exascale HPC systems are, however, introducing GPUs from other vendors, e.g. with the AMD GPU-based OLCF Frontier system just becoming available. AMD GPUs cannot be directly accessed using the NVIDI…
▽ More
NVIDIA has been the main provider of GPU hardware in HPC systems for over a decade. Most applications that benefit from GPUs have thus been developed and optimized for the NVIDIA software stack. Recent exascale HPC systems are, however, introducing GPUs from other vendors, e.g. with the AMD GPU-based OLCF Frontier system just becoming available. AMD GPUs cannot be directly accessed using the NVIDIA software stack, and require a porting effort by the application developers. This paper provides an overview of our experience porting and optimizing the CGYRO code, a widely-used fusion simulation tool based on FORTRAN with OpenACC-based GPU acceleration. While the porting from the NVIDIA compilers was relatively straightforward using the CRAY compilers on the AMD systems, the performance optimization required more fine-tuning. In the optimization effort, we uncovered code sections that had performed well on NVIDIA GPUs, but were unexpectedly slow on AMD GPUs. After AMD-targeted code optimizations, performance on AMD GPUs has increased to meet our expectations. Modest speed improvements were also seen on NVIDIA GPUs, which was an unexpected benefit of this exercise.
△ Less
Submitted 17 May, 2023;
originally announced May 2023.
-
Flexible, integrated modeling of tokamak stability, transport, equilibrium, and pedestal physics
Authors:
B. C. Lyons,
J. McClenaghan,
T. Slendebroek,
O. Meneghini,
T. F. Neiser,
S. P. Smith,
D. B. Weisberg,
E. A. Belli,
J. Candy,
J. M. Hanson,
L. L. Lao,
N. C. Logan,
S. Saarelma,
O. Sauter,
P. B. Snyder,
G. M. Staebler,
K. E. Thome,
A. D. Turnbull
Abstract:
The STEP (Stability, Transport, Equilibrium, and Pedestal) integrated-modeling tool has been developed in OMFIT to predict stable, tokamak equilibria self-consistently with core-transport and pedestal calculations. STEP couples theory-based codes to integrate a variety of physics, including MHD stability, transport, equilibrium, pedestal formation, and current-drive, heating, and fueling. The inpu…
▽ More
The STEP (Stability, Transport, Equilibrium, and Pedestal) integrated-modeling tool has been developed in OMFIT to predict stable, tokamak equilibria self-consistently with core-transport and pedestal calculations. STEP couples theory-based codes to integrate a variety of physics, including MHD stability, transport, equilibrium, pedestal formation, and current-drive, heating, and fueling. The input/output of each code is interfaced with a centralized ITER-IMAS data structure, allowing codes to be run in any order and enabling open-loop, feedback, and optimization workflows. This paradigm simplifies the integration of new codes, making STEP highly extensible. STEP has been verified against a published benchmark of six different integrated models. Core-pedestal calculations with STEP have been successfully validated against individual DIII-D H-mode discharges and across more than 500 discharges of the $H_{98,y2}$ database, with a mean error in confinement time from experiment less than 19%. STEP has also reproduced results in less conventional DIII-D scenarios, including negative-central-shear and negative-triangularity plasmas. Predictive STEP modeling has been used to assess performance in several tokamak reactors. Simulations of a high-field, large-aspect-ratio reactor show significantly lower fusion power than predicted by a zero-dimensional study, demonstrating the limitations of scaling-law extrapolations. STEP predictions have found promising EXCITE scenarios, including a high-pressure, 80%-bootstrap-fraction plasma. ITER modeling with STEP has shown that pellet fueling enhances fusion gain in both the baseline and advanced-inductive scenarios. Finally, STEP predictions for the SPARC baseline scenario are in good agreement with published results from the physics basis.
△ Less
Submitted 12 May, 2023;
originally announced May 2023.
-
Elevating zero dimensional global scaling predictions to self-consistent theory-based simulations
Authors:
Tim Slendebroek,
Joseph McClenaghan,
Orso Meneghini,
Brendan C. Lyons,
Sterling P. Smith,
Tom F. Neiser,
Nan Shi,
Jeff Candy
Abstract:
We have developed an innovative workflow, STEP-0D, within the OMFIT integrated modelling framework. Through systematic validation against the International Tokamak Physics Activity (ITPA) global H-mode confinement database, we demonstrated that STEP-0D, on average, predicts the energy confinement time with a mean relative error (MRE) of less than 19%. Moreover, this workflow showed promising poten…
▽ More
We have developed an innovative workflow, STEP-0D, within the OMFIT integrated modelling framework. Through systematic validation against the International Tokamak Physics Activity (ITPA) global H-mode confinement database, we demonstrated that STEP-0D, on average, predicts the energy confinement time with a mean relative error (MRE) of less than 19%. Moreover, this workflow showed promising potential in predicting plasmas for proposed fusion reactors such as ARC, EU-DEMO, and CFETR, indicating moderate H-factors between 0.9 and 1.2. STEP-0D allows theory-based prediction of tokamak scenarios, beginning with zero-dimensional (0D) quantities. The workflow initiates with the PRO-create module, generating physically consistent plasma profiles and equilibrium using the same 0D quantities as the IPB98(y,2) confinement scaling. This sets the starting point for the STEP (Stability, Transport, Equilibrium, and Pedestal) module, which further iterates between theory-based physics models of equilibrium, core transport, and pedestal to yield a self-consistent solution. Given these attributes, STEP-0D not only improves the accuracy of predicting plasma performance but also provides a path towards a novel fusion power plant (FPP) design workflow. When integrated with engineering and costing models within an optimization, this new approach could eliminate the iterative reconciliation between plasma models of varying fidelity. This potential for a more efficient design process underpins STEP-0D's significant contribution to future fusion power plant development.
△ Less
Submitted 6 July, 2023; v1 submitted 12 May, 2023;
originally announced May 2023.
-
Comparing single-node and multi-node performance of an important fusion HPC code benchmark
Authors:
Emily A. Belli,
Jeff Candy,
Igor Sfiligoi,
Frank Würthwein
Abstract:
Fusion simulations have traditionally required the use of leadership scale High Performance Computing (HPC) resources in order to produce advances in physics. The impressive improvements in compute and memory capacity of many-GPU compute nodes are now allowing for some problems that once required a multi-node setup to be also solvable on a single node. When possible, the increased interconnect ban…
▽ More
Fusion simulations have traditionally required the use of leadership scale High Performance Computing (HPC) resources in order to produce advances in physics. The impressive improvements in compute and memory capacity of many-GPU compute nodes are now allowing for some problems that once required a multi-node setup to be also solvable on a single node. When possible, the increased interconnect bandwidth can result in order of magnitude higher science throughput, especially for communication-heavy applications. In this paper we analyze the performance of the fusion simulation tool CGYRO, an Eulerian gyrokinetic turbulence solver designed and optimized for collisional, electromagnetic, multiscale simulation, which is widely used in the fusion research community. Due to the nature of the problem, the application has to work on a large multi-dimensional computational mesh as a whole, requiring frequent exchange of large amounts of data between the compute processes. In particular, we show that the average-scale nl03 benchmark CGYRO simulation can be run at an acceptable speed on a single Google Cloud instance with 16 A100 GPUs, outperforming 8 NERSC Perlmutter Phase1 nodes, 16 ORNL Summit nodes and 256 NERSC Cori nodes. Moving from a multi-node to a single-node GPU setup we get comparable simulation times using less than half the number of GPUs. Larger benchmark problems, however, still require a multi-node HPC setup due to GPU memory capacity needs, since at the time of writing no vendor offers nodes with a sufficient GPU memory setup. The upcoming external NVSWITCH does however promise to deliver an almost equivalent solution for up to 256 NVIDIA GPUs.
△ Less
Submitted 19 May, 2022;
originally announced May 2022.
-
Interpreting Radial Correlation Doppler Reflectometry using Gyrokinetic Simulations
Authors:
J. Ruiz Ruiz,
F. I. Parra,
V. H. Hall-Chen,
N. Christen,
M. Barnes,
J. Candy,
J. Garcia,
C. Giroud,
W. Guttenfelder,
J. C. Hillesheim,
C. Holland,
N. T. Howard,
Y. Ren,
A. E. White,
JET contributors.
Abstract:
A linear response, local model for the DBS amplitude applied to gyrokinetic simulations shows that radial correlation Doppler reflectometry measurements (RCDR, Schirmer et al., Plasma Phys. Control. Fusion 49 1019 (2007)) are not sensitive to the average turbulence radial correlation length, but to a correlation length that depends on the binormal wavenumber $k_\perp$ selected by the Doppler backs…
▽ More
A linear response, local model for the DBS amplitude applied to gyrokinetic simulations shows that radial correlation Doppler reflectometry measurements (RCDR, Schirmer et al., Plasma Phys. Control. Fusion 49 1019 (2007)) are not sensitive to the average turbulence radial correlation length, but to a correlation length that depends on the binormal wavenumber $k_\perp$ selected by the Doppler backscattering (DBS) signal. Nonlinear gyrokinetic simulations show that the turbulence naturally exhibits a non-separable power law spectrum in wavenumber space, leading to a power law dependence of the radial correlation length with binormal wavenumber $l_r \sim C k_\perp^{-α} (α\approx 1)$ which agrees with the inverse proportionality relationship between the measured $l_r$ and $k_\perp $ in experiments (Fernandez-Marina et al., Nucl. Fusion 54 072001 (2014)). This offers the possibility of characterizing the eddy aspect ratio in the perpendicular plane to the magnetic field and motivates future use of a non-separable turbulent spectrum to quantitatively interpret RCDR and potentially other turbulence diagnostics. The radial correlation length is only measurable when the radial resolution at the cutoff location $W_n$ satisfies $W_n \ll l_r$, while the measurement becomes dominated by $W_n$ for $W_n \gg l_r$. This suggests that $l_r$ is likely inaccessible for electron-scale DBS measurements ($k_\perpρ_s > 1$). The effect of $W_n$ on ion-scale radial correlation lengths could be non-negligible.
△ Less
Submitted 17 January, 2022;
originally announced January 2022.
-
Fusion research using Azure A100 HPC instances
Authors:
Igor Sfiligoi,
Jeff Candy,
Devarajan Subramanian
Abstract:
Fusion simulations have in the past required the use of leadership scale HPC resources to produce advances in physics. One such package is CGYRO, a premier multi-scale plasma turbulence simulation code. CGYRO is a typical HPC application that would not fit into a single node, as it requires O(100 GB) of memory and O(100 TFLOPS) worth of compute for relevant simulations. When distributed across mul…
▽ More
Fusion simulations have in the past required the use of leadership scale HPC resources to produce advances in physics. One such package is CGYRO, a premier multi-scale plasma turbulence simulation code. CGYRO is a typical HPC application that would not fit into a single node, as it requires O(100 GB) of memory and O(100 TFLOPS) worth of compute for relevant simulations. When distributed across multiple nodes, CGYRO requires high-throughput and low-latency networking to effectively use the compute resources. While in the past such compute may have required hundreds, or even thousands of nodes, recent advances in hardware capabilities allow for just a couple of nodes to deliver the necessary compute power. This paper presents our experience running CGYRO on NVIDIA A100 GPUs on InfiniBand-connected HPC resources in the Microsoft Azure Cloud. A comparison to older generation CPU and GPU Azure resources as well as on-prem resources is also provided.
△ Less
Submitted 18 November, 2021;
originally announced November 2021.
-
Development of CFETR scenarios with self-consistent core-pedestal coupled simulations
Authors:
Zhao Deng,
L. L. Lao,
V. S. Chan,
R. Prater,
J. Li,
Jiale Chen,
X. Jian,
N. Shi,
O. Meneghini,
G. M. Staebler,
Y. Q. Liu,
A. D. Turnbull,
J. Candy,
S. P. Smith,
P. B. Snyder,
CFETR physics team
Abstract:
This paper develops two non-inductive steady state scenarios for larger size configuration of China Fusion Engineering Test Reactor (CFETR) with integrated modeling simulations. A self-consistent core-pedestal coupled workflow for CFETR is developed under integrated modeling framework OMFIT, which allows more accurate evaluation of CFETR performance. The workflow integrates equilibrium code EFIT,…
▽ More
This paper develops two non-inductive steady state scenarios for larger size configuration of China Fusion Engineering Test Reactor (CFETR) with integrated modeling simulations. A self-consistent core-pedestal coupled workflow for CFETR is developed under integrated modeling framework OMFIT, which allows more accurate evaluation of CFETR performance. The workflow integrates equilibrium code EFIT, transport codes ONETWO and TGYRO, and pedestal code EPED. A fully non-inductive baseline phase I scenario is developed with the workflow, which satisfies the minimum goal of Fusion Nuclear Science Facility. Compared with previous work, which proves the larger size and higher toroidal field CFETR configuration than has the advantages of reducing heating and current drive requirements, lowering divertor and wall power loads, allowing higher bootstrap current fraction and better confinement. A fully non-inductive high-performance phase II scenario is developed, which explores the alpha-particle dominated self-heating regime. Phase II scenario achieves the target of fusion power Pfus>1GW and fusion gain Qfus>20, and it largely reduces auxiliary heating and current drive power. Moreover, the large neutron production of phase II increases the energy generation power and tritium breeding rate.
△ Less
Submitted 27 July, 2019;
originally announced July 2019.
-
Kinetic fluid moments closure for a magnetized plasma with collisions
Authors:
R. E. Waltz,
F. D. Halpern,
Z. Deng,
J. Candy
Abstract:
A novel method aimed at a kinetic moments closure for a magnetized plasma with arbitrary collisionality is proposed. The intended first application is to a tokamak edge and scrape-off-layer plasma. The velocity distribution function for each species is expanded in 8 Gaussian Radial Basis Functions (GRBFs) which are essentially shifted Maxwellians at eight representative 3D-velocity points of drift…
▽ More
A novel method aimed at a kinetic moments closure for a magnetized plasma with arbitrary collisionality is proposed. The intended first application is to a tokamak edge and scrape-off-layer plasma. The velocity distribution function for each species is expanded in 8 Gaussian Radial Basis Functions (GRBFs) which are essentially shifted Maxwellians at eight representative 3D-velocity points of drift. The vector of 8 fluid moments (for particle density, 3 particle fluxes, total energy density, and 3 energy fluxes) has an 8x8 analytic linear matrix relation to the vector of 8 GRBF density weights in 3D real space. The 8 fluid moments with sources for each species are advanced in time while the 8 GRBF weighs are determined from the 8x8 inverse matrix. The two closure moments (for the stress tensor and the energy weighted stress tensor) are linearly determined from the GRBF weights. Most importantly the velocity moments of the nonlinear Coulomb Fokker-Planck collision operator [Rosenbluth et al, Phys. Rev 107, 1957] are evaluated from the GRBF weights. Generalization from 8 to 12, 16, 20 .., in an energy weighted moment hierarchy is straightforward. The electric field follows from a generalized vorticity (quasi-neutral current continuity) equation. A strong drift ordering approximation can be applied to eliminate any spuriously unstable high frequency cyclotron motions. A novel weak drift ordering two-time step scheme avoids the vorticity equation by following ion cyclotron motion in time to get the electric field with ion gyroaveraging. Inclusion of low-beta magnetic perturbations is straightforward.
△ Less
Submitted 8 January, 2019;
originally announced January 2019.
-
Fluid moments of the Landau collision operator
Authors:
Eero Hirvijoki,
Manasvi Lingam,
David Pfefferlé,
Luca Comisso,
Jeff Candy,
Amitava Bhattacharjee
Abstract:
One important problem in plasma physics is the lack of an accurate and complete description of Coulomb collisions in associated fluid models. To shed light on the problem, this Letter introduces an integral identity involving the multi-dimensional Hermite tensor polynomials and presents a method for computing exact expressions for the fluid moments of the nonlinear Landau collision operator. The p…
▽ More
One important problem in plasma physics is the lack of an accurate and complete description of Coulomb collisions in associated fluid models. To shed light on the problem, this Letter introduces an integral identity involving the multi-dimensional Hermite tensor polynomials and presents a method for computing exact expressions for the fluid moments of the nonlinear Landau collision operator. The proposed methodology provides a systematic and rigorous means of extending the validity of fluid models that have an underlying inverse-square force particle dynamics to weakly collisional and strong flow regimes.
△ Less
Submitted 24 May, 2016;
originally announced May 2016.
-
Turbulent momentum transport due to neoclassical flows
Authors:
Jungpyo Lee,
Michael Barnes,
Felix I Parra,
Emily Belli,
Jeff Candy
Abstract:
Intrinsic toroidal rotation in a tokamak can be driven by turbulent momentum transport due to neoclassical flow effects breaking a symmetry of turbulence. In this paper we categorize the contributions due to neoclassical effects to the turbulent momentum transport, and evaluate each contribution using gyrokinetic simulations. We find that the relative importance of each contribution changes with c…
▽ More
Intrinsic toroidal rotation in a tokamak can be driven by turbulent momentum transport due to neoclassical flow effects breaking a symmetry of turbulence. In this paper we categorize the contributions due to neoclassical effects to the turbulent momentum transport, and evaluate each contribution using gyrokinetic simulations. We find that the relative importance of each contribution changes with collisionality. For low collisionality, the dominant contributions come from neoclassical particle and parallel flows. For moderate collisionality, there are non- negligible contributions due to neoclassical poloidal electric field and poloidal gradients of density and temperature, which are not important for low collisionality.
△ Less
Submitted 2 June, 2015;
originally announced June 2015.
-
The Gaussian Radial Basis Function Method for Plasma Kinetic Theory
Authors:
Eero Hirvijoki,
Jeff Candy,
Emily Belli,
Ola Embréus
Abstract:
A fundamental macroscopic description of a magnetized plasma is the Vlasov equation supplemented by the nonlinear inverse-square force Fokker-Planck collision operator [Rosenbluth et al., Phys. Rev., 107, 1957]. The Vlasov part describes advection in a six-dimensional phase space whereas the collision operator involves friction and diffusion coefficients that are weighted velocity-space integrals…
▽ More
A fundamental macroscopic description of a magnetized plasma is the Vlasov equation supplemented by the nonlinear inverse-square force Fokker-Planck collision operator [Rosenbluth et al., Phys. Rev., 107, 1957]. The Vlasov part describes advection in a six-dimensional phase space whereas the collision operator involves friction and diffusion coefficients that are weighted velocity-space integrals of the particle distribution function. The Fokker-Planck collision operator is an integro-differential, bilinear operator, and numerical discretization of the operator is far from trivial. In this letter, we describe a new approach to discretize the entire kinetic system based on an expansion in Gaussian Radial Basis functions (RBFs). This approach is particularly well-suited to treat the collision operator because the friction and diffusion coefficients can be analytically calculated. Although the RBF method is known to be a powerful scheme for the interpolation of scattered multidimensional data, Gaussian RBFs also have a deep physical interpretation as local thermodynamic equilibria. In this letter we outline the general theory, highlight the connection to plasma fluid theories, and also give 2D and 3D numerical solutions of the nonlinear Fokker-Planck equation. A broad spectrum of applications for the new method is anticipated in both astrophysical and laboratory plasmas.
△ Less
Submitted 21 March, 2015;
originally announced March 2015.
-
Turbulent transport of impurities and their effect on energy confinement
Authors:
I. Pusztai,
A. Mollen,
T. Fulop,
J. Candy
Abstract:
By presenting linear and nonlinear gyrokinetic studies, based on a balanced neutral beam injection deuterium discharge from the DIII-D tokamak, we demonstrate that impurities alter the scaling of the transport on the charge and mass of the main species, and even more importantly, they can dramatically change the energy transport even in relatively small quantities. A poloidally varying equilibrium…
▽ More
By presenting linear and nonlinear gyrokinetic studies, based on a balanced neutral beam injection deuterium discharge from the DIII-D tokamak, we demonstrate that impurities alter the scaling of the transport on the charge and mass of the main species, and even more importantly, they can dramatically change the energy transport even in relatively small quantities. A poloidally varying equilibrium electrostatic potential can lead to a strong reduction or sign change of the impurity peaking factor due to the combined effect of the in-out impurity density asymmetry and the EXB drift of impurities. We present an approximate expression for the impurity peaking factor and demonstrate that impurity peaking is not significantly affected by impurity self-collisions.
△ Less
Submitted 29 November, 2012; v1 submitted 10 October, 2012;
originally announced October 2012.
-
An Enhanced Nonlinear Critical Gradient for Electron Turbulent Transport due to Reversed Magnetic Shear
Authors:
J. L. Peterson,
G. W. Hammett,
D. R. Mikkelsen,
H. Y. Yuh,
J. Candy,
W. Guttenfelder,
S. M. Kaye,
B. LeBlanc
Abstract:
The first nonlinear gyrokinetic simulations of electron internal transport barriers (e-ITBs) in the National Spherical Torus Experiment show that reversed magnetic shear can suppress thermal transport by increasing the nonlinear critical gradient for electron-temperature-gradient-driven turbulence to three times its linear critical value. An interesting feature of this turbulence is nonlinearly dr…
▽ More
The first nonlinear gyrokinetic simulations of electron internal transport barriers (e-ITBs) in the National Spherical Torus Experiment show that reversed magnetic shear can suppress thermal transport by increasing the nonlinear critical gradient for electron-temperature-gradient-driven turbulence to three times its linear critical value. An interesting feature of this turbulence is nonlinearly driven off-midplane radial streamers. This work reinforces the experimental observation that magnetic shear is likely an effective way of triggering and sustaining e-ITBs in magnetic fusion devices.
△ Less
Submitted 11 May, 2011;
originally announced May 2011.