-
Fast Neutron Detection Efficiency of 6Li and 7Li Enriched CLYC Scintillators using an Am-Be source
Authors:
N. Blasi,
S. Brambilla,
F. Camera,
S. Ceruti,
A. Giaz,
L. Gini,
F. Groppi,
S. Manenti,
A. Mentana,
B. Million,
S. Riboldi
Abstract:
The fast neutrons produced by a calibrated 241Am-Be source were detected by two different Cs2LiYCl6:Ce (CLYC) scintillator detectors. The two cylindrical crystals (1"x1" in size) were enriched with more than 99% of 7Li (C7LYC) and with about 95% of 6Li (C6LYC), respectively. Both crystals can detect fast neutrons whereas only C6LYC can also detect thermal neutrons, due to the presence of 6Li. The…
▽ More
The fast neutrons produced by a calibrated 241Am-Be source were detected by two different Cs2LiYCl6:Ce (CLYC) scintillator detectors. The two cylindrical crystals (1"x1" in size) were enriched with more than 99% of 7Li (C7LYC) and with about 95% of 6Li (C6LYC), respectively. Both crystals can detect fast neutrons whereas only C6LYC can also detect thermal neutrons, due to the presence of 6Li. The measurement was performed at the L.A.S.A. Laboratory of INFN and University of Milano (Italy). To identify the neutron events, the Pulse-Shape-Discrimination technique was used. A value for the detection efficiency of the 241Am-Be emitted neutrons, with energy up to 10 MeV, was deduced.
△ Less
Submitted 27 July, 2018;
originally announced July 2018.
-
High energy Free Electron Laser for nuclear applications
Authors:
R. Brinkmann,
F. Camera,
I. Drebot,
V. Petrillo,
M. Rossetti Conti,
L. Serafini
Abstract:
The capability of Free-Electron Lasers to generate photon beams with record performances in the domain of MeV-class photon energy for nuclear photonics applications is here analyzed. We discuss possible nuclear FEL working points. Some typical situations are presented and simulated by means of the three-dimensional code GENESIS 1.3. The losses by spontaneous emission and by wakefield induced energ…
▽ More
The capability of Free-Electron Lasers to generate photon beams with record performances in the domain of MeV-class photon energy for nuclear photonics applications is here analyzed. We discuss possible nuclear FEL working points. Some typical situations are presented and simulated by means of the three-dimensional code GENESIS 1.3. The losses by spontaneous emission and by wakefield induced energy spread are then evaluated. The calculations show the possibility of generating FEL radiation at 1-4 MeV with less than 300 eV of bandwidth with not prohibitive set up requirements, achieving therefore regimes where no other kind of gamma ray sources could arrive.
△ Less
Submitted 2 April, 2018;
originally announced April 2018.
-
Characterization of Large Volume 3.5 x 8 inches LaBr3:Ce Detectors
Authors:
A. Giaz,
L. Pellegri,
S. Riboldi,
F. Camera,
N. Blasi,
C. Boiano,
A. Bracco,
S. Brambilla,
S. Ceruti,
S. Coelli,
F. C. L. Crespi,
M. Csatlòs,
S. Frega,
J. Gulyàs,
A. Krasznahorkay,
S. Lodetti,
B. Million,
A. Owens,
F. Quarati,
L. Stuhl,
O. Wieland
Abstract:
The properties of large volume cylindrical 3.5 x 8 inches (89 mm x 203 mm) LaBr3:Ce scintillation detectors coupled to the Hamamatsu R10233-100SEL photo-multiplier tube were investigated. These crystals are among the largest ones ever produced and still need to be fully characterized to determine how these detectors can be utilized and in which applications. We tested the detectors using monochrom…
▽ More
The properties of large volume cylindrical 3.5 x 8 inches (89 mm x 203 mm) LaBr3:Ce scintillation detectors coupled to the Hamamatsu R10233-100SEL photo-multiplier tube were investigated. These crystals are among the largest ones ever produced and still need to be fully characterized to determine how these detectors can be utilized and in which applications. We tested the detectors using monochromatic gamma-ray sources and in-beam reactions producing gamma rays up to 22.6 MeV; we acquired PMT signal pulses and calculated detector energy resolution and response linearity as a function of gamma-ray energy. Two different voltage dividers were coupled to the Hamamatsu R10233-100SEL PMT: the Hamamatsu E1198-26, based on straightforward resistive network design, and the LABRVD, specifically designed for our large volume LaBr3:Ce scintillation detectors, which also includes active semiconductor devices. Because of the extremely high light yield of LaBr3:Ce crystals we observed that, depending on the choice of PMT, voltage divider and applied voltage, some significant deviation from the ideally proportional response of the detector and some pulse shape deformation appear. In addition, crystal non-homogeneities and PMT gain drifts affect the (measured) energy resolution especially in case of high-energy gamma rays. We also measured the time resolution of detectors with different sizes (from 1x1 inches up to 3.5x8 inches), correlating the results with both the intrinsic properties of PMTs and GEANT simulations of the scintillation light collection process. The detector absolute full energy efficiency was measured and simulated up to gamma-rays of 30 MeV
△ Less
Submitted 28 August, 2013;
originally announced August 2013.
-
AGATA - Advanced Gamma Tracking Array
Authors:
S. Akkoyun,
A. Algora,
B. Alikhani,
F. Ameil,
G. de Angelis,
L. Arnold,
A. Astier,
A. Ataç,
Y. Aubert,
C. Aufranc,
A. Austin,
S. Aydin,
F. Azaiez,
S. Badoer,
D. L. Balabanski,
D. Barrientos,
G. Baulieu,
R. Baumann,
D. Bazzacco,
F. A. Beck,
T. Beck,
P. Bednarczyk,
M. Bellato,
M. A. Bentley,
G. Benzoni
, et al. (329 additional authors not shown)
Abstract:
The Advanced GAmma Tracking Array (AGATA) is a European project to develop and operate the next generation gamma-ray spectrometer. AGATA is based on the technique of gamma-ray energy tracking in electrically segmented high-purity germanium crystals. This technique requires the accurate determination of the energy, time and position of every interaction as a gamma ray deposits its energy within the…
▽ More
The Advanced GAmma Tracking Array (AGATA) is a European project to develop and operate the next generation gamma-ray spectrometer. AGATA is based on the technique of gamma-ray energy tracking in electrically segmented high-purity germanium crystals. This technique requires the accurate determination of the energy, time and position of every interaction as a gamma ray deposits its energy within the detector volume. Reconstruction of the full interaction path results in a detector with very high efficiency and excellent spectral response. The realization of gamma-ray tracking and AGATA is a result of many technical advances. These include the development of encapsulated highly-segmented germanium detectors assembled in a triple cluster detector cryostat, an electronics system with fast digital sampling and a data acquisition system to process the data at a high rate. The full characterization of the crystals was measured and compared with detector-response simulations. This enabled pulse-shape analysis algorithms, to extract energy, time and position, to be employed. In addition, tracking algorithms for event reconstruction were developed. The first phase of AGATA is now complete and operational in its first physics campaign. In the future AGATA will be moved between laboratories in Europe and operated in a series of campaigns to take advantage of the different beams and facilities available to maximize its science output. The paper reviews all the achievements made in the AGATA project including all the necessary infrastructure to operate and support the spectrometer.
△ Less
Submitted 17 September, 2012; v1 submitted 24 November, 2011;
originally announced November 2011.
