Showing 1–10 of 10 results for author: Buller, G S

Optical quantum super-resolution imaging and hypothesis testing

Authors: Ugo Zanforlin, Cosmo Lupo, Peter W. R. Connolly, Pieter Kok, Gerald S. Buller, Zixin Huang

Abstract: Estimating the angular separation between two incoherent thermal sources is a challenging task for direct imaging, especially when it is smaller than or comparable to the Rayleigh length. In addition, the task of discriminating whether there are one or two sources followed by detecting the faint emission of a secondary source in the proximity of a much brighter one is in itself a severe challenge… ▽ More Estimating the angular separation between two incoherent thermal sources is a challenging task for direct imaging, especially when it is smaller than or comparable to the Rayleigh length. In addition, the task of discriminating whether there are one or two sources followed by detecting the faint emission of a secondary source in the proximity of a much brighter one is in itself a severe challenge for direct imaging. Here, we experimentally demonstrate two tasks for superresolution imaging based on quantum state discrimination and quantum imaging techniques. We show that one can significantly reduce the probability of error for detecting the presence of a weak secondary source, especially when the two sources have small angular separations. In this work, we reduce the experimental complexity down to a single two-mode interferometer: we show that (1) this simple set-up is sufficient for the state discrimination task, and (2) if the two sources are of equal brightness, then this measurement can super-resolve their angular separation, saturating the quantum Cramér-Rao bound. By using a collection baseline of 5.3~mm, we resolve the angular separation of two sources that are placed 15~$μ$m apart at a distance of 1.0~m with an accuracy of $1.7\%$--this is between 2 to 3 orders of magnitudes more accurate than shot-noise limited direct imaging. △ Less

Submitted 18 February, 2022; originally announced February 2022.

Comments: 17 pages, 16 figures

Real-time 3D reconstruction from single-photon lidar data using plug-and-play point cloud denoisers

Authors: Julián Tachella, Yoann Altmann, Nicolas Mellado, Aongus McCarthy, Rachael Tobin, Gerald S. Buller, Jean-Yves Tourneret, Stephen McLaughlin

Abstract: Single-photon lidar has emerged as a prime candidate technology for depth imaging through challenging environments. Until now, a major limitation has been the significant amount of time required for the analysis of the recorded data. Here we show a new computational framework for real-time three-dimensional (3D) scene reconstruction from single-photon data. By combining statistical models with hig… ▽ More Single-photon lidar has emerged as a prime candidate technology for depth imaging through challenging environments. Until now, a major limitation has been the significant amount of time required for the analysis of the recorded data. Here we show a new computational framework for real-time three-dimensional (3D) scene reconstruction from single-photon data. By combining statistical models with highly scalable computational tools from the computer graphics community, we demonstrate 3D reconstruction of complex outdoor scenes with processing times of the order of 20 ms, where the lidar data was acquired in broad daylight from distances up to 320 metres. The proposed method can handle an unknown number of surfaces in each pixel, allowing for target detection and imaging through cluttered scenes. This enables robust, real-time target reconstruction of complex moving scenes, paving the way for single-photon lidar at video rates for practical 3D imaging applications. △ Less

Submitted 4 October, 2019; v1 submitted 16 May, 2019; originally announced May 2019.

Long-range depth imaging using a single-photon detector array and non-local data fusion

Authors: Susan Chan, Abderrahim Halimi, Feng Zhu, Istvan Gyongy, Robert K. Henderson, Richard Bowman, Steve McLaughlin, Gerald S. Buller, Jonathan Leach

Abstract: The ability to measure and record high-resolution depth images at long stand-off distances is important for a wide range of applications, including connected and automotive vehicles, defense and security, and agriculture and mining. In LIDAR (light detection and ranging) applications, single-photon sensitive detection is an emerging approach, offering high sensitivity to light and picosecond tempo… ▽ More The ability to measure and record high-resolution depth images at long stand-off distances is important for a wide range of applications, including connected and automotive vehicles, defense and security, and agriculture and mining. In LIDAR (light detection and ranging) applications, single-photon sensitive detection is an emerging approach, offering high sensitivity to light and picosecond temporal resolution, and consequently excellent surface-to-surface resolution. The use of large format CMOS single-photon detector arrays provides high spatial resolution and allows the timing information to be acquired simultaneously across many pixels. In this work, we combine state-of-the-art single-photon detector array technology with non-local data fusion to generate high resolution three-dimensional depth information of long-range targets. The system is based on a visible pulsed illumination system at 670~nm and a 240~$\times$ 320 pixel array sensor, achieving sub-centimeter precision in all three spatial dimensions at a distance of 150 meters. The non-local data fusion combines information from an optical image with sparse sampling of the single-photon array data, providing accurate depth information at low signature regions of the target. △ Less

Submitted 11 December, 2018; originally announced December 2018.

Robust Bayesian target detection algorithm for depth imaging from sparse single-photon data

Authors: Yoann Altmann, Ximing Ren, Aongus McCarthy, Gerald S. Buller, Steve McLaughlin

Abstract: This paper presents a new Bayesian model and associated algorithm for depth and intensity profiling using full waveforms from time-correlated single-photon counting (TCSPC) measurements in the limit of very low photon counts (i.e., typically less than 20 photons per pixel). The model represents each Lidar waveform as an unknown constant background level, which is combined in the presence of a targ… ▽ More This paper presents a new Bayesian model and associated algorithm for depth and intensity profiling using full waveforms from time-correlated single-photon counting (TCSPC) measurements in the limit of very low photon counts (i.e., typically less than 20 photons per pixel). The model represents each Lidar waveform as an unknown constant background level, which is combined in the presence of a target, to a known impulse response weighted by the target intensity and finally corrupted by Poisson noise. The joint target detection and depth imaging problem is expressed as a pixel-wise model selection and estimation problem which is solved using Bayesian inference. Prior knowledge about the problem is embedded in a hierarchical model that describes the dependence structure between the model parameters while accounting for their constraints. In particular, Markov random fields (MRFs) are used to model the joint distribution of the background levels and of the target presence labels, which are both expected to exhibit significant spatial correlations. An adaptive Markov chain Monte Carlo algorithm including reversible-jump updates is then proposed to compute the Bayesian estimates of interest. This algorithm is equipped with a stochastic optimization adaptation mechanism that automatically adjusts the parameters of the MRFs by maximum marginal likelihood estimation. Finally, the benefits of the proposed methodology are demonstrated through a series of experiments using real data. △ Less

Submitted 13 October, 2016; v1 submitted 21 January, 2016; originally announced January 2016.

Comments: arXiv admin note: text overlap with arXiv:1507.02511

Experimental demonstration of quantum digital signatures using phase-encoded coherent states of light

Authors: Patrick J. Clarke, Robert J. Collins, Vedran Dunjko, Erika Andersson, John Jeffers, Gerald S. Buller

Abstract: Digital signatures are frequently used in data transfer to prevent impersonation, repudiation and message tampering. Currently used classical digital signature schemes rely on public key encryption techniques, where the complexity of so-called "one-way" mathematical functions is used to provide security over sufficiently long timescales. No mathematical proofs are known for the long-term security… ▽ More Digital signatures are frequently used in data transfer to prevent impersonation, repudiation and message tampering. Currently used classical digital signature schemes rely on public key encryption techniques, where the complexity of so-called "one-way" mathematical functions is used to provide security over sufficiently long timescales. No mathematical proofs are known for the long-term security of such techniques. Quantum digital signatures offer a means of sending a message which cannot be forged or repudiated, with security verified by information-theoretical limits and quantum mechanics. Here we demonstrate an experimental system which distributes quantum signatures from one sender to two receivers and enables message sending ensured against forging and repudiation. Additionally, we analyse the security of the system in some typical scenarios. The system is based on the interference of phase encoded coherent states of light and our implementation utilises polarisation maintaining optical fibre and photons with a wavelength of 850 nm. △ Less

Submitted 4 June, 2013; originally announced June 2013.

Comments: Final version submitted for publication. Some slight changes were made to the structure of the text and figures before publication. Includes Supplementary Information

Journal ref: Nat. Commun. 3:1174 (2012)

Optimising the use of detector arrays for measuring intensity correlations of photon pairs

Authors: Daniel S. Tasca, Matthew P. Edgar, Frauke Izdebski, Gerald S. Buller, Miles J. Padgett

Abstract: Intensity correlation measurements form the basis of many experiments based on spontaneous parametric down-conversion. In the most common situation, two single-photon avalanche diodes and coincidence electronics are used in the detection of the photon pairs, and the coincidence count distributions are measured by making use of some scanning procedure. Here we analyse the measurement of intensity c… ▽ More Intensity correlation measurements form the basis of many experiments based on spontaneous parametric down-conversion. In the most common situation, two single-photon avalanche diodes and coincidence electronics are used in the detection of the photon pairs, and the coincidence count distributions are measured by making use of some scanning procedure. Here we analyse the measurement of intensity correlations using multi-element detector arrays. By considering the detector parameters such as the detection and noise probabilities, we found that the mean number of detected photons that maximises the visibility of the two photon correlations is approximately equal to the mean number of noise events in the detector array. We provide expressions predicting the strength of the measured intensity correlations as a function of the detector parameters and on the mean number of detected photons. We experimentally test our predictions by measuring far-field intensity correlations of spontaneous parametric down-conversion with an electron multiplying CCD camera, finding excellent agreement with the theoretical analysis. △ Less

Submitted 12 July, 2013; v1 submitted 29 May, 2013; originally announced May 2013.

Comments: Some typos corrected, references added. 12 pages, 5 figures, revtex4; comments welcome

Journal ref: Phys. Rev. A 88, 013816 (2013)

Singlet oxygen luminescence detection with a fiber-coupled superconducting nanowire single-photon detector

Authors: Nathan R. Gemmell, Aongus McCarthy, Baochang Liu, Michael G. Tanner, Sander N. Dorenbos, Valery Zwiller, Michael S. Patterson, Gerald S. Buller, Brian C. Wilson, Robert H. Hadfield

Abstract: Direct monitoring of singlet oxygen (1O2) luminescence is a particularly challenging infrared photodetection problem. 1O2, an excited state of the oxygen molecule, is a crucial intermediate in many biological processes. We employ a low noise superconducting nanowire single-photon detector to record 1O2 luminescence at 1270 nm wavelength from a model photosensitizer (Rose Bengal) in solution. Narro… ▽ More Direct monitoring of singlet oxygen (1O2) luminescence is a particularly challenging infrared photodetection problem. 1O2, an excited state of the oxygen molecule, is a crucial intermediate in many biological processes. We employ a low noise superconducting nanowire single-photon detector to record 1O2 luminescence at 1270 nm wavelength from a model photosensitizer (Rose Bengal) in solution. Narrow band spectral filtering and chemical quenching is used to verify the 1O2 signal, and lifetime evolution with the addition of protein is studied. Furthermore, we demonstrate the detection of 1O2 luminescence through a single optical fiber, a marked advance for dose monitoring in clinical treatments such as photodynamic therapy. △ Less

Submitted 26 February, 2013; originally announced February 2013.

Comments: 11 pages, 4 figures

Journal ref: Optics Express, Vol. 21, Issue 4, pp. 5005-5013 (2013)

Imaging high-dimensional spatial entanglement with a camera

Authors: Matthew P. Edgar, Daniel S. Tasca, Frauke Izdebski, Ryan E. Warburton, Jonathan Leach, Megan Agnew, Gerald S. Buller, Robert W. Boyd, Miles J. Padgett

Abstract: The light produced by parametric down-conversion shows strong spatial entanglement that leads to violations of EPR criteria for separability. Historically, such studies have been performed by scanning a single-element, single-photon detector across a detection plane. Here we show that modern electron-multiplying charge-coupled device cameras can measure correlations in both position and momentum a… ▽ More The light produced by parametric down-conversion shows strong spatial entanglement that leads to violations of EPR criteria for separability. Historically, such studies have been performed by scanning a single-element, single-photon detector across a detection plane. Here we show that modern electron-multiplying charge-coupled device cameras can measure correlations in both position and momentum across a multi-pixel field of view. This capability allows us to observe entanglement of around 2,500 spatial states and demonstrate Einstein-Podolsky-Rosen type correlations by more than two orders of magnitude. More generally, our work shows that cameras can lead to important new capabilities in quantum optics and quantum information science. △ Less

Submitted 9 August, 2012; v1 submitted 5 April, 2012; originally announced April 2012.

Comments: 5 pages, 4 figures

Journal ref: Nat. Commun. 3:984 (2012)

Experimental high-dimensional two-photon entanglement and violations of generalised Bell inequalities

Authors: Adetunmise C. Dada, Jonathan Leach, Gerald S. Buller, Miles J. Padgett, Erika Andersson

Abstract: Quantum entanglement plays a vital role in many quantum information and communication tasks. Entangled states of higher dimensional systems are of great interest due to the extended possibilities they provide. For example, they allow the realisation of new types of quantum information schemes that can offer higher information-density coding and greater resilience to errors than can be achieved wit… ▽ More Quantum entanglement plays a vital role in many quantum information and communication tasks. Entangled states of higher dimensional systems are of great interest due to the extended possibilities they provide. For example, they allow the realisation of new types of quantum information schemes that can offer higher information-density coding and greater resilience to errors than can be achieved with entangled two-dimensional systems. Closing the detection loophole in Bell test experiments is also more experimentally feasible when higher dimensional entangled systems are used. We have measured previously untested correlations between two photons to experimentally demonstrate high-dimensional entangled states. We obtain violations of Bell-type inequalities generalised to d-dimensional systems with up to d = 12. Furthermore, the violations are strong enough to indicate genuine 11-dimensional entanglement. Our experiments use photons entangled in orbital angular momentum (OAM), generated through spontaneous parametric down-conversion (SPDC), and manipulated using computer controlled holograms. △ Less

Submitted 19 December, 2011; v1 submitted 27 April, 2011; originally announced April 2011.

Journal ref: Nature Physics 7, 677-680 (2011)

Design, fabrication and characterisation of InGaAs/InP single-photon avalanche diode detectors

Authors: Ryan E. Warburton, Sara Pellegrini, Lionel Tan, Jo Shien Ng, Andrey Krysa, Kris Groom, John P. R. David, Sergio Cova, Gerald S. Buller

Abstract: This paper demonstrates the performance of planar geometry InGaAs/InP avalanche diodes, specifically designed and fabricated for Geiger-mode operation at wavelengths around 1550nm, in terms of dark count rate, single-photon detection efficiency, afterpulsing and photon-timing jitter. This paper demonstrates the performance of planar geometry InGaAs/InP avalanche diodes, specifically designed and fabricated for Geiger-mode operation at wavelengths around 1550nm, in terms of dark count rate, single-photon detection efficiency, afterpulsing and photon-timing jitter. △ Less

Submitted 8 May, 2006; originally announced May 2006.

Comments: Presented at CLEO QELS, Long Beach, California (May 2006)