-
WKB Across Caustics: The Screened-WKB Method
Authors:
Oscar P. Bruno,
Martin D. Maas
Abstract:
We present a new methodology, based on the WKB approximation and Fast Fourier Transforms, for the evaluation of wave propagation through inhomogeneous media. This method can accurately resolve fields containing caustics, while still enjoying the computational advantages of the WKB approximation, namely, the ability to resolve arbitrarily high-frequency problems in computing times which are orders-…
▽ More
We present a new methodology, based on the WKB approximation and Fast Fourier Transforms, for the evaluation of wave propagation through inhomogeneous media. This method can accurately resolve fields containing caustics, while still enjoying the computational advantages of the WKB approximation, namely, the ability to resolve arbitrarily high-frequency problems in computing times which are orders-of-magnitude shorter than those required by other algorithms presently available. For example, the proposed approach can simulate with high accuracy (with errors such as e.g. 0.1\%--0.001\%) the propagation of 5 cm radar signals across two-dimensional configurations resembling atmospheric ducting conditions, spanning hundreds of kilometers and millions of wavelengths in electrical size, in computing times of a few minutes in a single CPU core. [Preliminary version]
△ Less
Submitted 3 March, 2024; v1 submitted 10 January, 2023;
originally announced January 2023.
-
Parallel inverse-problem solver for time-domain optical tomography with perfect parallel scaling
Authors:
E. L. Gaggioli,
O. P. Bruno
Abstract:
This paper presents an efficient parallel radiative transfer-based inverse-problem solver for time-domain optical tomography. The radiative transfer equation provides a physically accurate model for the transport of photons in biological tissue, but the high computational cost associated with its solution has hindered its use in time-domain optical-tomography and other areas. In this paper this pr…
▽ More
This paper presents an efficient parallel radiative transfer-based inverse-problem solver for time-domain optical tomography. The radiative transfer equation provides a physically accurate model for the transport of photons in biological tissue, but the high computational cost associated with its solution has hindered its use in time-domain optical-tomography and other areas. In this paper this problem is tackled by means of a number of computational and modeling innovations, including 1) A spatial parallel-decomposition strategy with perfect parallel scaling for the forward and inverse problems of optical tomography on parallel computer systems; and, 2) A Multiple Staggered Source method (MSS) that solves the inverse transport problem at a computational cost that is independent of the number of sources employed, and which significantly accelerates the reconstruction of the optical parameters: a six-fold MSS acceleration factor is demonstrated in this paper. Finally, this contribution presents 3) An intuitive derivation of the adjoint-based formulation for evaluation of functional gradients, including the highly-relevant general Fresnel boundary conditions -- thus, in particular, generalizing results previously available for vacuum boundary conditions. Solutions of large and realistic 2D inverse problems are presented in this paper, which were produced on a 256-core computer system. The combined parallel/MSS acceleration approach reduced the required computing times by several orders of magnitude, from months to a few hours.
△ Less
Submitted 15 February, 2022;
originally announced February 2022.
-
Vector potential-based MHD solver for non-periodic flows using Fourier continuation expansions
Authors:
Mauro Fontana,
Pablo D. Mininni,
Oscar P. Bruno,
Pablo Dmitruk
Abstract:
A high-order method to evolve in time electromagnetic and velocity fields in conducting fluids with non-periodic boundaries is presented. The method has a small overhead compared with fast FFT-based pseudospectral methods in periodic domains. It uses the magnetic vector potential formulation for accurately enforcing the null divergence of the magnetic field, and allowing for different boundary con…
▽ More
A high-order method to evolve in time electromagnetic and velocity fields in conducting fluids with non-periodic boundaries is presented. The method has a small overhead compared with fast FFT-based pseudospectral methods in periodic domains. It uses the magnetic vector potential formulation for accurately enforcing the null divergence of the magnetic field, and allowing for different boundary conditions including perfectly conducting walls or vacuum surroundings, two cases relevant for many astrophysical, geophysical, and industrial flows. A spectral Fourier continuation method is used to accurately represent all fields and their spatial derivatives, allowing also for efficient solution of Poisson equations with different boundaries. A study of conducting flows at different Reynolds and Hartmann numbers, and with different boundary conditions, is presented to study convergence of the method and the accuracy of the solenoidal and boundary conditions.
△ Less
Submitted 2 February, 2022; v1 submitted 14 July, 2021;
originally announced July 2021.
-
A Windowed Green Function method for elastic scattering problems on a half-space
Authors:
Oscar P. Bruno,
Tao Yin
Abstract:
This paper presents a windowed Green function (WGF) method for the numerical solution of problems of elastic scattering by "locally-rough surfaces" (i.e., local perturbations of a half space), under either Dirichlet or Neumann boundary conditions, and in both two and three spatial dimensions. The proposed WGF method relies on an integral-equation formulation based on the free-space Green function,…
▽ More
This paper presents a windowed Green function (WGF) method for the numerical solution of problems of elastic scattering by "locally-rough surfaces" (i.e., local perturbations of a half space), under either Dirichlet or Neumann boundary conditions, and in both two and three spatial dimensions. The proposed WGF method relies on an integral-equation formulation based on the free-space Green function, together with smooth operator windowing (based on a "slow-rise" windowing function) and efficient high-order singular-integration methods. The approach avoids the evaluation of the expensive layer Green function for elastic problems on a half-space, and it yields uniformly fast convergence for all incident angles. Numerical experiments for both two and three dimensional problems are presented, demonstrating the accuracy and super-algebraically fast convergence of the proposed method as the window-size grows.
△ Less
Submitted 29 May, 2020;
originally announced June 2020.
-
Fourier continuation method for incompressible fluids with boundaries
Authors:
M. Fontana,
Oscar P. Bruno,
Pablo D. Mininni,
Pablo Dmitruk
Abstract:
We present a Fourier Continuation-based parallel pseudospectral method for incompressible fluids in cuboid non-periodic domains. The method produces dispersionless and dissipationless derivatives with fast spectral convergence inside the domain, and with very high order convergence at the boundaries. Incompressibility is imposed by solving a Poisson equation for the pressure. Being Fourier-based,…
▽ More
We present a Fourier Continuation-based parallel pseudospectral method for incompressible fluids in cuboid non-periodic domains. The method produces dispersionless and dissipationless derivatives with fast spectral convergence inside the domain, and with very high order convergence at the boundaries. Incompressibility is imposed by solving a Poisson equation for the pressure. Being Fourier-based, the method allows for fast computation of spectral transforms. It is compatible with uniform grids (although refined or nested meshes can also be implemented), which in turn allows for explicit time integration at sufficiently high Reynolds numbers. Using a new parallel code named SPECTER we illustrate the method with two problems: channel flow, and plane Rayleigh-Bénard convection under the Boussinesq approximation. In both cases the method yields results compatible with previous studies using other high-order numerical methods, with mild requirements on the time step for stability.
△ Less
Submitted 13 July, 2020; v1 submitted 4 February, 2020;
originally announced February 2020.
-
Biophysical characterization of membrane phase transition profiles for the discrimination of Outer Membrane Vesicles (OMVs) from Escherichia coli grown at different temperatures
Authors:
Angelo Sarra,
Antonella Celluzzi,
Stefania Paola Bruno,
Caterina Ricci,
Simona Sennato,
Maria Grazia Ortore,
Stefano Casciardi,
Paolo Postorino,
Federico Bordi,
Andrea Masotti
Abstract:
Dynamic Light Scattering (DLS), Small Angle X-ray Scattering (SAXS) and Transmission Electron Microscopy (TEM) are physical techniques widely employed to characterize the morphology and the structure of vesicles such as liposomes or human extracellular vesicles (exosomes). Bacterial extracellular vesicles are similar in size to human exosomes, although their function and membrane properties have n…
▽ More
Dynamic Light Scattering (DLS), Small Angle X-ray Scattering (SAXS) and Transmission Electron Microscopy (TEM) are physical techniques widely employed to characterize the morphology and the structure of vesicles such as liposomes or human extracellular vesicles (exosomes). Bacterial extracellular vesicles are similar in size to human exosomes, although their function and membrane properties have not been elucidated in such detail as in the case of exosomes. Here, we applied the above cited techniques, in synergy with the thermodynamic characterization of the vesicles lipid membrane using a turbidimetric technique to the study of vesicles produced by Gram-negative bacteria (Outer Membrane Vesicles, OMVs) grown at different temperatures. This study demonstrated that our combined approach is useful to discriminate vesicles of different origin or coming from bacteria cultured under different experimental conditions. We envisage that in a near future the techniques employed in our work will be further implemented to discriminate complex mixtures of bacterial vesicles, thus showing great promises for biomedical or diagnostic applications.
△ Less
Submitted 28 November, 2019;
originally announced November 2019.
-
Micro Fresnel Mirror Array with Individual Mirror Control
Authors:
Binal Poyyathuruthy Bruno,
Robert Schütze,
Ruediger Grunwald,
Ulrike Wallrabe
Abstract:
We present the design and fabrication of a miniaturized array of piezoelectrically actuated high speed Fresnel mirrors with individual mirror control. These Fresnel mirrors can be used to generate propagation invariant and self-healing interference patterns. The mirrors are actuated using piezobimorph actuators, and the consequent change of the tilting angle of the mirrors changes the fringe spaci…
▽ More
We present the design and fabrication of a miniaturized array of piezoelectrically actuated high speed Fresnel mirrors with individual mirror control. These Fresnel mirrors can be used to generate propagation invariant and self-healing interference patterns. The mirrors are actuated using piezobimorph actuators, and the consequent change of the tilting angle of the mirrors changes the fringe spacing of the interference pattern generated. The array consists of four Fresnel mirrors each having an area of 2x2 mm2 arranged in a 2x2 configuration. The device, optimized using FEM simulations, is able to achieve maximum mirror deflections of 15 mrad, and has a resonance frequency of 28 kHz.
△ Less
Submitted 27 January, 2020; v1 submitted 22 November, 2019;
originally announced November 2019.
-
Regularized integral equation methods for elastic scattering problems in three dimensions
Authors:
Oscar P. Bruno,
Tao Yin
Abstract:
This paper presents novel methodologies for the numerical simulation of scattering of elastic waves by both closed and open surfaces in three-dimensional space. The proposed approach utilizes new integral formulations as well as an extension to the elastic context of the efficient high-order singular-integration methods~\cite{BG18} introduced recently for the acoustic case. In order to obtain form…
▽ More
This paper presents novel methodologies for the numerical simulation of scattering of elastic waves by both closed and open surfaces in three-dimensional space. The proposed approach utilizes new integral formulations as well as an extension to the elastic context of the efficient high-order singular-integration methods~\cite{BG18} introduced recently for the acoustic case. In order to obtain formulations leading to iterative solvers (GMRES) which converge in small numbers of iterations we investigate, theoretically and computationally, the character of the spectra of various operators associated with the elastic-wave Calderón relation---including some of their possible compositions and combinations. In particular, by relying on the fact that the eigenvalues of the composite operator $NS$ are bounded away from zero and infinity, new uniquely-solvable, low-GMRES-iteration integral formulation for the closed-surface case are presented. The introduction of corresponding low-GMRES-iteration equations for the open-surface equations additionally requires, for both spectral quality as well as accuracy and efficiency, use of weighted versions of the classical integral operators to match the singularity of the unknown density at edges. Several numerical examples demonstrate the accuracy and efficiency of the proposed methodology.
△ Less
Submitted 27 September, 2019;
originally announced September 2019.
-
Transient Propagation and Scattering of Quasi-Rayleigh Waves in Plates: Quantitative comparison between Pulsed TV-Holography Measurements and FC(Gram) elastodynamic simulations
Authors:
Faisal Amlani,
Oscar P. Bruno,
José Carlos López-Vázquez,
Cristina Trillo,
Ángel F. Doval,
José L. Fernández,
Pablo Rodríguez-Gómez
Abstract:
We study the scattering of transient, high-frequency, narrow-band quasi-Rayleigh elastic waves by through-thickness holes in aluminum plates, in the framework of ultrasonic nondestructive testing (NDT) based on full-field optical detection. Sequences of the instantaneous two-dimensional (2-D) out-of-plane displacement scattering maps are measured with a self-developed PTVH system. The correspondin…
▽ More
We study the scattering of transient, high-frequency, narrow-band quasi-Rayleigh elastic waves by through-thickness holes in aluminum plates, in the framework of ultrasonic nondestructive testing (NDT) based on full-field optical detection. Sequences of the instantaneous two-dimensional (2-D) out-of-plane displacement scattering maps are measured with a self-developed PTVH system. The corresponding simulated sequences are obtained by means of an FC(Gram) elastodynamic solver introduced recently, which implements a full three-dimensional (3D) vector formulation of the direct linear-elasticity scattering problem. A detailed quantitative comparison between these experimental and numerical sequences, which is presented here for the first time, shows very good agreement both in the amplitude and the phase of the acoustic field in the forward, lateral and backscattering areas. It is thus suggested that the combination of the PTVH system and the FC(Gram) elastodynamic solver provides an effective ultrasonic inspection tool for plate-like structures, with a significant potential for ultrasonic NDT applications.
△ Less
Submitted 27 May, 2019; v1 submitted 13 May, 2019;
originally announced May 2019.
-
Majorana's stellar representation for the local polarization of harmonic electromagnetic and gravitational waves
Authors:
Patrick Bruno
Abstract:
The local polarization of electromagnetic (EMW) and gravitational waves (GW) is discussed from an operational point of view, in which all the relevant mathematical framework is constructed in terms of measurements of the power absorbed by a local detector. The intrinsic dependence of the observations upon the nature of the detector is emphasized. In particular, the benefit of using a dual-symmetri…
▽ More
The local polarization of electromagnetic (EMW) and gravitational waves (GW) is discussed from an operational point of view, in which all the relevant mathematical framework is constructed in terms of measurements of the power absorbed by a local detector. The intrinsic dependence of the observations upon the nature of the detector is emphasized. In particular, the benefit of using a dual-symmetric detector, equally sensitive to the electric and magnetic fields of the EMW (resp. gravito-electric and gravito-magnetic tensor in the GW case) is pointed out. The Majorana stellar representation of the polarization is introduced, and its physical interpretation is highlighted. Finally, expressions for the energy density, linear momentum density, helicity and spin density of the wave in terms of the Majorana representation are presented.
△ Less
Submitted 20 March, 2019;
originally announced March 2019.
-
Weighted integral solvers for elastic scattering by open arcs in two dimensions
Authors:
Oscar P. Bruno,
Liwei Xu,
Tao Yin
Abstract:
We present a novel approach for the numerical solution of problems of elastic scattering by open arcs in two dimensions. Our methodology relies on the composition of weighted versions of the classical operators associated with Dirichlet and Neumann boundary conditions in conjunction with a certain "open-arc elastic Calderón relation" whose validity is demonstrated in this paper on the basis of num…
▽ More
We present a novel approach for the numerical solution of problems of elastic scattering by open arcs in two dimensions. Our methodology relies on the composition of weighted versions of the classical operators associated with Dirichlet and Neumann boundary conditions in conjunction with a certain "open-arc elastic Calderón relation" whose validity is demonstrated in this paper on the basis of numerical experiments, but whose rigorous mathematical proof is left for future work. Using this Calderón relation in conjunction with spectrally accurate quadrature rules and the Krylov-subspace linear algebra solver GMRES, the proposed overall open-arc elastic solver produces results of high accuracy in small number of iterations---for low and high frequencies alike. A variety of numerical examples in this paper demonstrate the accuracy and efficiency of the proposed methodology.
△ Less
Submitted 22 February, 2019;
originally announced February 2019.
-
Multiphysics simulation of the aspherical deformation of piezo-glass membrane lenses including hysteresis, fabrication and non-linear effects
Authors:
Florian Lemke,
Yasmina Frey,
Binal P Bruno,
Katrin Philipp,
Nektarios Koukourakis,
Jürgen Czarske,
Ulrike Wallrabe,
Matthias C Wapler
Abstract:
In this paper we present and verify the non-linear simulation of an aspherical adaptive lens based on a piezo-glass sandwich membrane with combined bending and buckling actuation. To predict the full non-linear piezoelectric behavior, we measured the non-linear charge coefficient, hysteresis and creep effects of the piezo material and inserted them into the FEM model using a virtual electric field…
▽ More
In this paper we present and verify the non-linear simulation of an aspherical adaptive lens based on a piezo-glass sandwich membrane with combined bending and buckling actuation. To predict the full non-linear piezoelectric behavior, we measured the non-linear charge coefficient, hysteresis and creep effects of the piezo material and inserted them into the FEM model using a virtual electric field. We further included and discussed the fabrication parameters -- glue layers and thermal stress -- and their variations. To verify our simulations, we fabricated and measured a set of lenses with different geometries, where we found good agreement and show that their qualitative behavior is also well described by a simple analytical model. We finally discuss the effects of the geometry on the electric response and find, e.g., an increased focal power range from $\pm 4.5$ to $\pm 9\, \mathrm{m}^{-1}$ when changing the aperture from $14$ to $10\, \mathrm{mm}$.
△ Less
Submitted 17 May, 2019; v1 submitted 28 November, 2018;
originally announced February 2019.
-
High-order, Dispersionless "Fast-Hybrid" Wave Equation Solver. Part I: $\mathcal{O}(1)$ Sampling Cost via Incident-Field Windowing and Recentering
Authors:
Thomas G. Anderson,
Oscar P. Bruno,
Mark Lyon
Abstract:
This paper proposes a frequency/time hybrid integral-equation method for the time dependent wave equation in two and three-dimensional spatial domains. Relying on Fourier Transformation in time, the method utilizes a fixed (time-independent) number of frequency-domain integral-equation solutions to evaluate, with superalgebraically-small errors, time domain solutions for arbitrarily long times. Th…
▽ More
This paper proposes a frequency/time hybrid integral-equation method for the time dependent wave equation in two and three-dimensional spatial domains. Relying on Fourier Transformation in time, the method utilizes a fixed (time-independent) number of frequency-domain integral-equation solutions to evaluate, with superalgebraically-small errors, time domain solutions for arbitrarily long times. The approach relies on two main elements, namely, 1) A smooth time-windowing methodology that enables accurate band-limited representations for arbitrarily-long time signals, and 2) A novel Fourier transform approach which, in a time-parallel manner and without causing spurious periodicity effects, delivers numerically dispersionless spectrally-accurate solutions. A similar hybrid technique can be obtained on the basis of Laplace transforms instead of Fourier transforms, but we do not consider the Laplace-based method in the present contribution. The algorithm can handle dispersive media, it can tackle complex physical structures, it enables parallelization in time in a straightforward manner, and it allows for time lea**---that is, solution sampling at any given time $T$ at $\mathcal{O}(1)$-bounded sampling cost, for arbitrarily large values of $T$, and without requirement of evaluation of the solution at intermediate times. The proposed frequency-time hybridization strategy, which generalizes to any linear partial differential equation in the time domain for which frequency-domain solutions can be obtained (including e.g. the time-domain Maxwell equations), and which is applicable in a wide range of scientific and engineering contexts, provides significant advantages over other available alternatives such as volumetric discretization, time-domain integral equations, and convolution-quadrature approaches.
△ Less
Submitted 2 January, 2020; v1 submitted 7 July, 2018;
originally announced July 2018.
-
A Chebyshev-based rectangular-polar integral solver for scattering by general geometries described by non-overlap** patches
Authors:
Oscar P. Bruno,
Emmanuel Garza
Abstract:
This paper introduces a high-order-accurate strategy for integration of singular kernels and edge-singular integral densities that appear in the context of boundary integral equation formulations of the problem of acoustic scattering. In particular, the proposed method is designed for use in conjunction with geometry descriptions given by a set of arbitrary non-overlap** logically-quadrilateral…
▽ More
This paper introduces a high-order-accurate strategy for integration of singular kernels and edge-singular integral densities that appear in the context of boundary integral equation formulations of the problem of acoustic scattering. In particular, the proposed method is designed for use in conjunction with geometry descriptions given by a set of arbitrary non-overlap** logically-quadrilateral patches---which makes the algorithm particularly well suited for treatment of CAD-generated geometries. Fejér's first quadrature rule is incorporated in the algorithm, to provide a spectrally accurate method for evaluation of contributions from far integration regions, while highly-accurate precomputations of singular and near-singular integrals over certain "surface patches" together with two-dimensional Chebyshev transforms and suitable surface-varying "rectangular-polar" changes of variables, are used to obtain the contributions for singular and near-singular interactions. The overall integration method is then used in conjunction with the linear-algebra solver GMRES to produce solutions for sound-soft open- and closed-surface scattering obstacles, including an application to an aircraft described by means of a CAD representation. The approach is robust, fast, and highly accurate: use of a few points per wavelength suffices for the algorithm to produce far-field accuracies of a fraction of a percent, and slight increases in the discretization densities give rise to significant accuracy improvements.
△ Less
Submitted 4 July, 2018;
originally announced July 2018.
-
Properties of piezoceramic materials in high electric field actuator applications
Authors:
Binal P Bruno,
Ahmed Raouf Fahmy,
Moritz Stürmer,
Ulrike Wallrabe,
Matthias C Wapler
Abstract:
In this paper, we compare the performance of 8 PZT ceramics and one PMN-PT material for typical bending actuator applications. This includes the measurement of non-linear transverse charge coefficient at high electric field strength and related quantities such as the Young's modulus, relative permittivity, coercive field and their temperature dependencies, and the Curie temperature. Most materials…
▽ More
In this paper, we compare the performance of 8 PZT ceramics and one PMN-PT material for typical bending actuator applications. This includes the measurement of non-linear transverse charge coefficient at high electric field strength and related quantities such as the Young's modulus, relative permittivity, coercive field and their temperature dependencies, and the Curie temperature. Most materials show much higher strains than what is expected from the datasheet values. We further study the operating region for fields against the polarization direction in different operating cycles and demonstrate a long-term stable quick re-poling method which increases the operating range of negative-only cycles from 50% of Ec to 75% of the coercive field.
△ Less
Submitted 7 February, 2019; v1 submitted 31 March, 2018;
originally announced April 2018.
-
Windowed Green Function method for the Helmholtz equation in presence of multiply layered media
Authors:
Oscar P. Bruno,
Carlos Pérez-Arancibia
Abstract:
This paper presents a new methodology for the solution of problems of two- and three-dimensional acoustic scattering (and, in particular, two-dimensional electromagnetic scattering) by obstacles and defects in presence an arbitrary number of penetrable layers. Relying on use of certain slow-rise windowing functions, the proposed Windowed Green Function approach (WGF) efficiently evaluates oscillat…
▽ More
This paper presents a new methodology for the solution of problems of two- and three-dimensional acoustic scattering (and, in particular, two-dimensional electromagnetic scattering) by obstacles and defects in presence an arbitrary number of penetrable layers. Relying on use of certain slow-rise windowing functions, the proposed Windowed Green Function approach (WGF) efficiently evaluates oscillatory integrals over unbounded domains, with high accuracy, without recourse to the highly expensive Sommerfeld integrals that have typically been used to account for the effect of underlying planar multi-layer structures. The proposed methodology, whose theoretical basis was presented in the recent contribution (SIAM J. Appl. Math. 76(5), p. 1871, 2016), is fast, accurate, flexible, and easy to implement. Our numerical experiments demonstrate that the numerical errors resulting from the proposed approach decrease faster than any negative power of the window size. In a number of examples considered in this paper the proposed method is up to thousands of times faster, for a given accuracy, than corresponding methods based on use of Sommerfeld integrals.
△ Less
Submitted 2 March, 2017;
originally announced March 2017.
-
Rapidly convergent quasi-periodic Green functions for scattering by arrays of cylinders---including Wood anomalies
Authors:
Oscar P. Bruno,
Agustin G. Fernandez-Lado
Abstract:
This paper presents a full-spectrum Green function methodology (which is valid, in particular, at and around Wood-anomaly frequencies) for evaluation of scattering by periodic arrays of cylinders of arbitrary cross section-with application to wire gratings, particle arrays and reflectarrays and, indeed, general arrays of conducting or dielectric bounded obstacles under both TE and TM polarized ill…
▽ More
This paper presents a full-spectrum Green function methodology (which is valid, in particular, at and around Wood-anomaly frequencies) for evaluation of scattering by periodic arrays of cylinders of arbitrary cross section-with application to wire gratings, particle arrays and reflectarrays and, indeed, general arrays of conducting or dielectric bounded obstacles under both TE and TM polarized illumination. The proposed method, which, for definiteness is demonstrated here for arrays of perfectly conducting particles under TE polarization, is based on use of the shifted Green-function method introduced in the recent contribution (Bruno and Delourme, Jour. Computat. Phys. pp. 262--290 (2014)). A certain infinite term arises at Wood anomalies for the cylinder-array problems considered here that is not present in the previous rough-surface case. As shown in this paper, these infinite terms can be treated via an application of ideas related to the Woodbury-Sherman-Morrison formulae. The resulting approach, which is applicable to general arrays of obstacles even at and around Wood-anomaly frequencies, exhibits fast convergence and high accuracies. For example, a few hundreds of milliseconds suffice for the proposed approach to evaluate solutions throughout the resonance region (wavelengths comparable to the period and cylinder sizes) with full single-precision accuracy.
△ Less
Submitted 26 October, 2016;
originally announced October 2016.
-
High-order integral equation methods for problems of scattering by bumps and cavities on half-planes
Authors:
Carlos Pérez-Arancibia,
Oscar P. Bruno
Abstract:
This paper presents high-order integral equation methods for evaluation of electromagnetic wave scattering by dielectric bumps and dielectric cavities on perfectly conducting or dielectric half-planes. In detail, the algorithms introduced in this paper apply to eight classical scattering problems, namely: scattering by a dielectric bump on a perfectly conducting or a dielectric half-plane, and sca…
▽ More
This paper presents high-order integral equation methods for evaluation of electromagnetic wave scattering by dielectric bumps and dielectric cavities on perfectly conducting or dielectric half-planes. In detail, the algorithms introduced in this paper apply to eight classical scattering problems, namely: scattering by a dielectric bump on a perfectly conducting or a dielectric half-plane, and scattering by a filled, overfilled or void dielectric cavity on a perfectly conducting or a dielectric half-plane. In all cases field representations based on single-layer potentials for appropriately chosen Green functions are used. The numerical far fields and near fields exhibit excellent convergence as discretizations are refined--even at and around points where singular fields and infinite currents exist.
△ Less
Submitted 16 May, 2014;
originally announced May 2014.
-
AtmoHEAD 2013 workshop / Atmospheric Monitoring for High-Energy Astroparticle Detectors
Authors:
K. Bernlöhr,
G. Bellassai,
O. Blanch,
M. Bourgeat,
P. Bruno,
M. Buscemi,
C. Cassardo,
P. M. Chadwick,
R. Chalme-Calvet,
F. Chouza,
M. Cilmo,
M. Coco,
J. Colombi,
M. Compin,
M. K. Daniel,
R. De Los Reyes,
J. Ebr,
R. D'Elia,
C. Deil,
A. Etchegoyen,
M. Doro,
S. Ferrarese,
M. Fiorini,
LL. Font,
D. Garrido
, et al. (48 additional authors not shown)
Abstract:
A 3-day international workshop on atmospheric monitoring and calibration for high-energy astroparticle detectors, with a view towards next-generation facilities. The atmosphere is an integral component of many high-energy astroparticle detectors. Imaging atmospheric Cherenkov telescopes and cosmic-ray extensive air shower detectors are the two instruments driving the rapidly evolving fields of ver…
▽ More
A 3-day international workshop on atmospheric monitoring and calibration for high-energy astroparticle detectors, with a view towards next-generation facilities. The atmosphere is an integral component of many high-energy astroparticle detectors. Imaging atmospheric Cherenkov telescopes and cosmic-ray extensive air shower detectors are the two instruments driving the rapidly evolving fields of very-high- and ultra-high-energy astrophysics. In these instruments, the atmosphere is used as a giant calorimeter where cosmic rays and gamma rays deposit their energy and initiate EASs; it is also the medium through which the resulting Cherenkov light propagates. Uncertainties in real-time atmospheric conditions and in the fixed atmospheric models typically dominate all other systematic errors. With the improved sensitivity of upgraded IACTs such as H.E.S.S.-II and MAGIC-II and future facilities like the Cherenkov Telescope Array (CTA) and JEM-EUSO, statistical uncertainties are expected to be significantly reduced, leaving the atmosphere as the limiting factor in the determination of astroparticle spectra. Varying weather conditions necessitate the development of suitable atmospheric monitoring to be integrated in the overall instrument calibration, including Monte Carlo simulations. With expertise distributed across multiple collaborations and scientific domains, an interdisciplinary workshop is being convened to advance progress on this critical and timely topic.
△ Less
Submitted 19 March, 2014;
originally announced March 2014.
-
The Site of the ASTRI SST-2M Telescope Prototype
Authors:
Maria Concetta Maccarone,
Giuseppe Leto,
Pietro Bruno,
Mauro Fiorini,
Alessandro Grillo,
Alberto Segreto,
Luca Stringhetti
Abstract:
ASTRI is a Flagship Project financed by the Italian Ministry of Education, University and Research, and led by the Italian National Institute of Astrophysics, INAF. Primary goal of the ASTRI project is the design and production of an end-to-end prototype of Small Size Telescope for the CTA (Cherenkov Telescope Array) in a dual-mirror configuration (SST-2M) equipped with a camera at the focal plane…
▽ More
ASTRI is a Flagship Project financed by the Italian Ministry of Education, University and Research, and led by the Italian National Institute of Astrophysics, INAF. Primary goal of the ASTRI project is the design and production of an end-to-end prototype of Small Size Telescope for the CTA (Cherenkov Telescope Array) in a dual-mirror configuration (SST-2M) equipped with a camera at the focal plane composed by an array of Silicon Photo-Multipliers and devoted to the investigation of the highest gamma-ray energy band. The ASTRI SST-2M prototype will be placed at the INAF M.G. Fracastoro observing station in Serra La Nave on the Etna Mountain near Catania, Italy. After the verification tests, devoted to probe the technological solutions adopted, the ASTRI SST-2M prototype will perform scientific observations on the Crab Nebula and on some of the brightest TeV sources. Here we present the Serra La Nave site, its meteorological and weather conditions, the sky darkness and visibility, and the complex of auxiliary instrumentation that will be used on site to support the calibration and science verification phase as well as the regular data reconstruction and analysis of the ASTRI SST-2M prototype.
△ Less
Submitted 19 July, 2013;
originally announced July 2013.
-
The dual-mirror Small Size Telescope for the Cherenkov Telescope Array
Authors:
G. Pareschi,
G. Agnetta,
L. A. Antonelli,
D. Bastieri,
G. Bellassai,
M. Belluso,
C. Bigongiari,
S. Billotta,
B. Biondo,
G. Bonanno,
G. Bonnoli,
P. Bruno,
A. Bulgarelli,
R. Canestrari,
M. Capalbi,
P. Caraveo,
A. Carosi,
E. Cascone,
O. Catalano,
M. Cereda,
P. Conconi,
V. Conforti,
G. Cusumano,
V. De Caprio,
A. De Luca
, et al. (89 additional authors not shown)
Abstract:
In this paper, the development of the dual mirror Small Size Telescopes (SST) for the Cherenkov Telescope Array (CTA) is reviewed. Up to 70 SST, with a primary mirror diameter of 4 m, will be produced and installed at the CTA southern site. These will allow investigation of the gamma-ray sky at the highest energies accessible to CTA, in the range from about 1 TeV to 300 TeV. The telescope presente…
▽ More
In this paper, the development of the dual mirror Small Size Telescopes (SST) for the Cherenkov Telescope Array (CTA) is reviewed. Up to 70 SST, with a primary mirror diameter of 4 m, will be produced and installed at the CTA southern site. These will allow investigation of the gamma-ray sky at the highest energies accessible to CTA, in the range from about 1 TeV to 300 TeV. The telescope presented in this contribution is characterized by two major innovations: the use of a dual mirror Schwarzschild-Couder configuration and of an innovative camera using as sensors either multi-anode photomultipliers (MAPM) or silicon photomultipliers (SiPM). The reduced plate-scale of the telescope, achieved with the dual-mirror optics, allows the camera to be compact (40 cm in diameter), and low-cost. The camera, which has about 2000 pixels of size 6x6 mm^2, covers a field of view of 10°. The dual mirror telescopes and their cameras are being developed by three consortia, ASTRI (Astrofisica con Specchi a Tecnologia Replicante Italiana, Italy/INAF), GATE (Gamma-ray Telescope Elements, France/Paris Observ.) and CHEC (Compact High Energy Camera, universities in UK, US and Japan) which are merging their efforts in order to finalize an end-to-end design that will be constructed for CTA. A number of prototype structures and cameras are being developed in order to investigate various alternative designs. In this contribution, these designs are presented, along with the technological solutions under study.
△ Less
Submitted 18 July, 2013;
originally announced July 2013.
-
Comment on "Space-Time Crystals of Trapped Ions": And Yet it Moves Not !
Authors:
Patrick Bruno
Abstract:
A Comment on "Space-Time Crystals of Trapped ions", by Tongcang Li et al. (PRL 109, 163001 (2012); arXiv:1206.4772
A Comment on "Space-Time Crystals of Trapped ions", by Tongcang Li et al. (PRL 109, 163001 (2012); arXiv:1206.4772
△ Less
Submitted 20 November, 2012;
originally announced November 2012.
