-
Temperature dependence of 7Li NMR relaxation rates in Li3InCl6, Li3YCl6, Li1.48Al0.48Ge1.52(PO4)3 and LiPS5Cl
Authors:
Darshan Chalise,
Carlos Juarez-Yescas,
Beniamin Zahiri,
Paul V. Braun,
David G. Cahill
Abstract:
Inorganic solid-state battery electrolytes show high ionic conductivities and enable the fabrication of all solid-state batteries. In this work, we present the temperature dependence of spin-lattice relaxation time (T1), spin-spin relaxation time (T2), and resonance linewidth of the 7Li nuclear magnetic resonance (NMR) for four solid-state battery electrolytes (Li3InCl6 (LIC), Li3YCl6 (LYC), Li1.4…
▽ More
Inorganic solid-state battery electrolytes show high ionic conductivities and enable the fabrication of all solid-state batteries. In this work, we present the temperature dependence of spin-lattice relaxation time (T1), spin-spin relaxation time (T2), and resonance linewidth of the 7Li nuclear magnetic resonance (NMR) for four solid-state battery electrolytes (Li3InCl6 (LIC), Li3YCl6 (LYC), Li1.48Al0.48Ge1.52(PO4)3 (LAGP) and LiPS5Cl (LPSC)) from 173 K to 403 K at a 7Li resonance frequency of 233 MHz, and from 253 K to 353 K at a 7Li resonance frequency of 291 MHz. Additionally, we measured the spin-lattice relaxation rates at an effective 7Li resonance frequency of 133 kHz using a spin-locking pulse sequence in the temperature range of 253 K to 353 K. In LPSC, the 7Li NMR relaxation is consistent with the Bloembergen-Pound-Purcell (BPP) theory of NMR relaxation of dipolar nuclei. In LIC, LYC and LAGP, the BPP theory does not describe the NMR relaxation rates for the temperature range and frequencies of our measurements. The presented NMR relaxation data assists in providing a complete picture of Li diffusion in the four solid-state battery electrolytes.
△ Less
Submitted 22 March, 2023;
originally announced March 2023.
-
Timescales of Cell Membrane Fusion Mediated by SARS-CoV2 Spike Protein and its Receptor ACE2
Authors:
Dominic Hayward,
Purushottam S Dubey,
Marie-Sousai Appavou,
Olaf Holderer,
Henrich Frielinghaus,
Sylvain Prevost,
Bela Farago,
Anna Sokolova,
Piotr Zolnierczuk,
Heiner von Buttlar,
Peter Braun,
Joachim Jakob Bugert,
Rosina Ehmann,
Sebastian Jaksch
Abstract:
In this manuscript we describe the investigation of the SARS-CoV2 membrane fusion timescale by means of small-angle neutron scattering (SANS) using hydrogen/deuterium contrast variation. After the successful production of virus-like vesicles and human-host-cell-like vesicles we were able to follow the fusion of the respective vesicles in real-time. This was done using deuterated and protonated pho…
▽ More
In this manuscript we describe the investigation of the SARS-CoV2 membrane fusion timescale by means of small-angle neutron scattering (SANS) using hydrogen/deuterium contrast variation. After the successful production of virus-like vesicles and human-host-cell-like vesicles we were able to follow the fusion of the respective vesicles in real-time. This was done using deuterated and protonated phospholipids in the vesicles in a neutron-contrast matched solvent. The vesicles were identical apart from either the presence or absence of the SARS-CoV2 spike protein. The human-host-cell-like vesicles were carrying an ACE2 receptor protein in all cases. In case of the absence of the spike protein a fusion over several hours was observed in agreement with literature, with a time constant of 4.5 h. In comparison, there was not time-evolution, but immediate fusion of the vesicles when the spike protein was present. Those two figures, fusion over several hours and fusion below 10 s corresponding to the absence or presence of the spike protein allow an upper-limit estimate for the fusion times of virus-like vesicles with the SARS-CoV2 spike protein of 10 s. This very fast fusion, when compared to the case without spike protein it is a factor of 2500, can also help to explain why infection with SARS-CoV2 can be so effective and fast. Studying spike protein variants using our method may explain differences in transmissibility between SARS-CoV2 strains. In addition, the model developed here can potentially be applied to any enveloped virus.
△ Less
Submitted 19 March, 2023;
originally announced March 2023.
-
Visualizing Energy Transfer Between Redox-Active Colloids
Authors:
Subing Qu,
Zihao Ou,
Yavuz Savsatli,
Lehan Yao,
Yu Cao,
Elena C. Montoto,
Hao Yu,
**gshu Hui,
Bo Li,
Julio A. N. T. Soares,
Lydia Kisley,
Brian Bailey,
Elizabeth A. Murphy,
Junsheng Liu,
Christopher M. Evans,
Charles M. Schroeder,
Joaquín Rodríguez-López,
Jeffrey S. Moore,
Qian Chen,
Paul V. Braun
Abstract:
Redox-based electrical conduction in nonconjugated polymers has been explored less than a decade, yet is already showing promise as a new concept for electrical energy transport. Here using monolayers and sub-monolayers of touching micron-sized redox active colloids (RAC) containing high densities of ethyl-viologen (EV) side groups, intercolloid redox-based electron transport was directly observed…
▽ More
Redox-based electrical conduction in nonconjugated polymers has been explored less than a decade, yet is already showing promise as a new concept for electrical energy transport. Here using monolayers and sub-monolayers of touching micron-sized redox active colloids (RAC) containing high densities of ethyl-viologen (EV) side groups, intercolloid redox-based electron transport was directly observed via fluorescence microscopy. This observation was enabled by the discovery that these RAC exhibit a highly non-linear electrofluorochromism which can be quantitatively coupled to the colloid redox state. By evaluating the quasi-Fickian nature of the charge transfer (CT) kinetics, the apparent CT diffusion coefficient DCT was extracted. Along with addressing more fundamental questions regarding energy transport in colloidal materials, this first real-time real-space imaging of energy transport within monolayers of redox-active colloids may provide insights into energy transfer in flow batteries, and enable design of new forms of conductive polymers for applications including organic electronics.
△ Less
Submitted 1 April, 2022;
originally announced April 2022.
-
Inducing tensile failure of claystone through thermal pressurization in a novel triaxial device
Authors:
Philipp Braun,
Pierre Delage,
Siavash Ghabezloo,
Baptiste Chabot,
Nathalie Conil,
Minh-Ngoc Vu
Abstract:
Complex coupled thermo-hydromechanical (THM) loading paths are expected to occur in clay rocks which serve as host formations for geological radioactive waste repositories. Exothermic waste packages heat the rock, causing thermal strains and temperature induced pore pressure build-up. The drifts are designed in such a way as to limit these effects. One has to anticipate failure and fracturing of t…
▽ More
Complex coupled thermo-hydromechanical (THM) loading paths are expected to occur in clay rocks which serve as host formations for geological radioactive waste repositories. Exothermic waste packages heat the rock, causing thermal strains and temperature induced pore pressure build-up. The drifts are designed in such a way as to limit these effects. One has to anticipate failure and fracturing of the material, should pore pressures exceed the tensile resistance of the rock. To characterise the behaviour of the Callovo-Oxfordian claystone (COx) under effective tension and to quantify the tensile failure criterion, a laboratory program is carried out in this work. THM loading paths which correspond to the expected in situ conditions are recreated in the laboratory. To this end, a special triaxial system was developed, which allows the independent control of radial and axial stresses, as well as of pore pressure and temperature of rock specimens. More importantly, the device allows one to maintain axial effective tension on a specimen. Saturated cylindrical claystone specimens were tested in undrained conditions under constrained lateral deformation and under nearly constant axial stress. The specimens were heated until the induced pore pressures created effective tensile stresses and ultimately fractured the material. The failure happened at average axial effective tensile stresses around 3.0 MPa. Fracturing under different lateral total stresses allows one to describe the failure with a Hoek-Brown or Fairhurst's generalized Griffith criterion. Measured axial extension strains are analysed based on a transversely isotropic thermo-poroelastic constitutive model, which is able to satisfactorily reproduce the observed behaviour.
△ Less
Submitted 18 March, 2022;
originally announced March 2022.
-
Thermal conductivity of intercalation, conversion, and alloying lithium-ion battery electrode materials as function of their state of charge
Authors:
Jungwoo Shin,
Sanghyeon Kim,
Hoonkee Park,
Ho Won Jang,
David G. Cahill,
Paul V. Braun
Abstract:
Upon insertion and extraction of lithium, materials important for electrochemical energy storage can undergo changes in thermal conductivity ($Λ$) and elastic modulus ($\it M$). These changes are attributed to evolution of the intrinsic thermal carrier lifetime and interatomic bonding strength associated with structural transitions of electrode materials with varying degrees of reversibility. Usin…
▽ More
Upon insertion and extraction of lithium, materials important for electrochemical energy storage can undergo changes in thermal conductivity ($Λ$) and elastic modulus ($\it M$). These changes are attributed to evolution of the intrinsic thermal carrier lifetime and interatomic bonding strength associated with structural transitions of electrode materials with varying degrees of reversibility. Using in situ time-domain thermoreflectance (TDTR) and picosecond acoustics, we systemically study $Λ$ and $\it M$ of conversion, intercalation and alloying electrode materials during cycling. The intercalation V$_{2}$O$_{5}$ and TiO$_{2}$ exhibit non-monotonic reversible $Λ$ and $\it M$ switching up to a factor of 1.8 ($Λ$) and 1.5 ($\it M$) as a function of lithium content. The conversion Fe$_{2}$O$_{3}$ and NiO undergo irreversible decays in $Λ$ and $\it M$ upon the first lithiation. The alloying Sb shows the largest and partially reversible order of the magnitude switching in $Λ$ between the delithiated (18 W m$^{-1}$ K$^{-1}$) and lithiated states (<1 W m$^{-1}$ K$^{-1}$). The irreversible $Λ$ is attributed to structural degradation and pulverization resulting from substantial volume changes during cycling. These findings provide new understandings of the thermal and mechanical property evolution of electrode materials during cycling of importance for battery design, and also point to pathways for forming materials with thermally switchable properties.
△ Less
Submitted 21 September, 2021; v1 submitted 30 June, 2021;
originally announced June 2021.
-
Thermo-poro-elastic behaviour of a transversely isotropic shale: Thermal expansion and pressurization
Authors:
Philipp Braun,
Siavash Ghabezloo,
Pierre Delage,
Jean Sulem,
Nathalie Conil
Abstract:
The Callovo-Oxfordian (COx) claystone is considered as a candidate host rock for a deep geological radioactive waste repository in France. Due to the exothermic waste packages, the rock is expected to be submitted to temperatures up to 90 °C. The temperature rise induces deformations of the host rock, together with an increase in pore pressures, involving complex thermo-hydro-mechanical (THM) coup…
▽ More
The Callovo-Oxfordian (COx) claystone is considered as a candidate host rock for a deep geological radioactive waste repository in France. Due to the exothermic waste packages, the rock is expected to be submitted to temperatures up to 90 °C. The temperature rise induces deformations of the host rock, together with an increase in pore pressures, involving complex thermo-hydro-mechanical (THM) couplings. This study aims to better characterize the THM response of the COx claystone to temperature changes in the laboratory. To this end, claystone specimens were tested in a temperature controlled, high pressure isotropic compression cell, under stress conditions close to the in-situ ones. Thermal loads were applied on the specimens along different heating and cooling paths. A temperature corrected strain gage system provided precise measurements of the anisotropic strain response of the specimens. Drained and undrained thermal expansion coefficients in both transversely isotropic directions were determined. The measurement of pore pressure changes in undrained condition yielded the thermal pressurization coefficient. All parameters were analysed for their compatibility within the thermo-poro-elastic framework, and their stress and temperature dependency was identified.
△ Less
Submitted 26 October, 2020; v1 submitted 20 April, 2020;
originally announced April 2020.
-
Transversely isotropic poroelastic behaviour of the Callovo-Oxfordian claystone: A set of stress-dependent parameters
Authors:
Philipp Braun,
Siavash Ghabezloo,
Pierre Delage,
Jean Sulem,
Nathalie Conil
Abstract:
In the framework of a deep geological radioactive waste disposal in France, the hydromechanical properties of the designated host rock, the Callovo-Oxfordian claystone (COx), are investigated in laboratory tests. Experiments presented in this study are carried out to determine several coefficients required within a transversely isotropic material model. They include isotropic compression tests, po…
▽ More
In the framework of a deep geological radioactive waste disposal in France, the hydromechanical properties of the designated host rock, the Callovo-Oxfordian claystone (COx), are investigated in laboratory tests. Experiments presented in this study are carried out to determine several coefficients required within a transversely isotropic material model. They include isotropic compression tests, pore pressure tests, and deviatoric loading tests parallel and perpendicular to the bedding plane. We emphasize the adapted experimental devices and testing procedures, necessary to detect small strains under high pressures, on a material, which is sensitive to water and has a very low permeability. In particular, we discovered a significant decrease of elastic stiffness with decreasing effective stress, which was observed to be reversible. In both isotropic and deviatoric tests, a notable anisotropic strain response was found. The Young modulus parallel to bedding was about 1.8 times higher than the one perpendicular to the bedding plane. A notably low Poisson ratio perpendicular to the bedding plane with values between 0.1 and 0.2 was evidenced. While the anisotropy of the back-calculated Biot coefficient was found to be low, a significant anisotropy of the Skempton coefficient was computed. The performed experiments provide an overdetermined set of material parameters at different stress levels. Using all determined parameters in a least square error regression scheme, seven independent elastic coefficients and their effective stress dependency are characterized. Parameters measured under isotropic loading are well represented by this set of coefficients, while the poroelastic framework with isotropic stress dependency is not sufficient to describe laboratory findings from triaxial loading.
△ Less
Submitted 26 October, 2020; v1 submitted 20 April, 2020;
originally announced April 2020.
-
Three-dimensional single gyroid photonic crystals with a mid-infrared bandgap
Authors:
Siying Peng,
Runyu Zhang,
Valerian H. Chen,
Emil T. Khabiboulline,
Paul Braun,
Harry A. Atwater
Abstract:
A gyroid structure is a distinct morphology that is triply periodic and consists of minimal isosurfaces containing no straight lines. We have designed and synthesized amorphous silicon (a-Si) mid-infrared gyroid photonic crystals that exhibit a complete bandgap in infrared spectroscopy measurements. Photonic crystals were synthesized by deposition of a-Si/Al2O3 coatings onto a sacrificial polymer…
▽ More
A gyroid structure is a distinct morphology that is triply periodic and consists of minimal isosurfaces containing no straight lines. We have designed and synthesized amorphous silicon (a-Si) mid-infrared gyroid photonic crystals that exhibit a complete bandgap in infrared spectroscopy measurements. Photonic crystals were synthesized by deposition of a-Si/Al2O3 coatings onto a sacrificial polymer scaffold defined by two-photon lithography. We observed a 100% reflectance at 7.5 \mum for single gyroids with a unit cell size of 4.5 \mum, in agreement with the photonic bandgap position predicted from full-wave electromagnetic simulations, whereas the observed reflection peak shifted to 8 um for a 5.5 \mum unit cell size. This approach represents a simulation-fabrication-characterization platform to realize three-dimensional gyroid photonic crystals with well-defined dimensions in real space and tailored properties in momentum space.
△ Less
Submitted 13 April, 2016;
originally announced April 2016.
-
Multifractality of river runoff and precipitation: Comparison of fluctuation analysis and wavelet methods
Authors:
Jan W. Kantelhardt,
Diego Rybski,
Stephan A. Zschiegner,
Peter Braun,
Eva Koscielny-Bunde,
Valerie Livina,
Shlomo Havlin,
Armin Bunde
Abstract:
We study the multifractal temporal scaling properties of river discharge and precipitation records. We compare the results for the multifractal detrended fluctuation analysis method with the results for the wavelet transform modulus maxima technique and obtain agreement within the error margins. In contrast to previous studies, we find non-universal behaviour: On long time scales, above a crosso…
▽ More
We study the multifractal temporal scaling properties of river discharge and precipitation records. We compare the results for the multifractal detrended fluctuation analysis method with the results for the wavelet transform modulus maxima technique and obtain agreement within the error margins. In contrast to previous studies, we find non-universal behaviour: On long time scales, above a crossover time scale of several months, the runoff records are described by fluctuation exponents varying from river to river in a wide range. Similar variations are observed for the precipitation records which exhibit weaker, but still significant multifractality. For all runoff records the type of multifractality is consistent with a modified version of the binomial multifractal model, while several precipitation records seem to require different models.
△ Less
Submitted 19 May, 2003;
originally announced May 2003.
-
Long-term persistence and multifractality of river runoff records: Detrended fluctuation studies
Authors:
Eva Koscielny-Bunde,
Jan W. Kantelhardt,
Peter Braun,
Armin Bunde,
Shlomo Havlin
Abstract:
We study temporal correlations and multifractal properties of long river discharge records from 41 hydrological stations around the globe. To detect long-term correlations and multifractal behaviour in the presence of trends, we apply several recently developed methods [detrended fluctuation analysis (DFA), wavelet analysis, and multifractal DFA] that can systematically detect and overcome nonst…
▽ More
We study temporal correlations and multifractal properties of long river discharge records from 41 hydrological stations around the globe. To detect long-term correlations and multifractal behaviour in the presence of trends, we apply several recently developed methods [detrended fluctuation analysis (DFA), wavelet analysis, and multifractal DFA] that can systematically detect and overcome nonstationarities in the data at all time scales. We find that above some crossover time that usually is several weeks, the daily runoffs are long-term correlated, being characterized by a correlation function C(s) that decays as C(s) ~ s^(gamma). The exponent gamma varies from river to river in a wide range between 0.1 and 0.9. The power-law decay of C(s) corresponds to a power-law increase of the related fluctuation function F_2(s) ~ s^H where H = 1-gamma/2. We also find that in most records, for large times, weak multifractality occurs. The Renyi exponent tau(q) for q between -10 and +10 can be fitted to the remarkably simple form tau(q) = -ln(a^q+b^q) /ln 2, with solely two parameters a and b between 0 and 1 with a+b >= 1. This type of multifractality is obtained from a generalization of the multiplicative cascade model.
△ Less
Submitted 23 January, 2004; v1 submitted 19 May, 2003;
originally announced May 2003.
-
Slow Decoherence of Superpositions of Macroscopically Distinct States
Authors:
Daniel Braun,
Petr A. Braun,
Fritz Haake
Abstract:
Linear superpositions of macroscopically distinct quantum states (sometimes also called Schrödinger cat states) are usually almost immediately reduced to a statistical mixture if exposed to the dephasing influence of a dissipative environment. Couplings to the environment with a certain symmetry can lead to slow decoherence, however. We give specific examples of slowly decohering Schrödinger cat…
▽ More
Linear superpositions of macroscopically distinct quantum states (sometimes also called Schrödinger cat states) are usually almost immediately reduced to a statistical mixture if exposed to the dephasing influence of a dissipative environment. Couplings to the environment with a certain symmetry can lead to slow decoherence, however. We give specific examples of slowly decohering Schrödinger cat states in a realistic quantum optical system and discuss how they might be constructed experimentally.
△ Less
Submitted 11 March, 1999;
originally announced March 1999.
-
Long-lived Quantum Coherence between Macroscopically Distinct States in Superradiance
Authors:
Daniel Braun,
Petr A. Braun,
Fritz Haake
Abstract:
The dephasing influence of a dissipative environment reduces linear superpositions of macroscopically distinct quantum states (sometimes also called Schrödinger cat states) usually almost immediately to a statistical mixture. This process is called decoherence. Couplings to the environment with a certain symmetry can lead to slow decoherence. In this Letter we show that the collective coupling o…
▽ More
The dephasing influence of a dissipative environment reduces linear superpositions of macroscopically distinct quantum states (sometimes also called Schrödinger cat states) usually almost immediately to a statistical mixture. This process is called decoherence. Couplings to the environment with a certain symmetry can lead to slow decoherence. In this Letter we show that the collective coupling of a large number of two-level atoms to an electromagnetic field mode in a cavity that leads to the phenomena of superradiance has such a symmetry, at least approximately. We construct superpositions of macroscopically distinct quantum states decohering only on a classical time scale and propose an experiment in which the extraordinarily slow decoherence should be observable.
△ Less
Submitted 11 March, 1999;
originally announced March 1999.
-
Semiclassical spin dam**: Superradiance revisited
Authors:
Petr A. Braun,
Daniel Braun,
Fritz Haake,
Joachim Weber
Abstract:
A well known description of superradiance from pointlike collections of many atoms involves the dissipative motion of a large spin. The pertinent ``superradiance master equation'' allows for a formally exact solution which we subject to a semiclassical evaluation. The clue is a saddle-point approximation for an inverse Laplace transform. All previous approximate treatments, disparate as they may…
▽ More
A well known description of superradiance from pointlike collections of many atoms involves the dissipative motion of a large spin. The pertinent ``superradiance master equation'' allows for a formally exact solution which we subject to a semiclassical evaluation. The clue is a saddle-point approximation for an inverse Laplace transform. All previous approximate treatments, disparate as they may appear, are encompassed in our systematic formulation. A byproduct is a hitherto unknown rigorous relation between coherences and probabilities. Our results allow for generalizations to spin dynamics with chaos in the classical limit.
△ Less
Submitted 27 March, 1998;
originally announced March 1998.