-
Reduced-order models of wall shear stress patterns in the left atrial appendage from a data-augmented atrial database
Authors:
Jorge Dueñas-Pamplona,
Sergio Rodríguez-Aparicio,
Alejandro Gonzalo,
Savannah F. Bifulco,
Francisco Castro,
Conrado Ferrera,
Óscar Flores,
Patrick M. Boyle,
José Sierra-Pallares,
Javier García García,
Juan C. del Álamo
Abstract:
Background: Atrial fibrillation (AF) is the most common sustained cardiac arrhythmia, affecting over 1% of the population. It is usually triggered by irregular electrical impulses that cause the atria to contract irregularly and ineffectively. It increases blood stasis and the risk of thrombus formation within the left atrial appendage (LAA) and aggravates adverse atrial remodeling. Despite recent…
▽ More
Background: Atrial fibrillation (AF) is the most common sustained cardiac arrhythmia, affecting over 1% of the population. It is usually triggered by irregular electrical impulses that cause the atria to contract irregularly and ineffectively. It increases blood stasis and the risk of thrombus formation within the left atrial appendage (LAA) and aggravates adverse atrial remodeling. Despite recent efforts, LAA flow patterns representative of AF conditions and their association with LAA stasis remain poorly characterized.
Aim: To develop reduced-order data-driven models of LAA flow patterns during atrial remodeling in order to uncover flow disturbances concurrent with LAA stasis that could add granularity to clinical decision criteria.
Methods: We combined a geometric data augmentation process with projection of results from 180 CFD atrial simulations on a universal LAA coordinate (ULAAC) system. The projection approach enhances data visualization and facilitates direct comparison between different anatomical and functional states. ULAAC projections were used as input for a proper orthogonal decomposition (POD) algorithm to build reduced-order models of hemodynamic metrics, extracting flow characteristics associated with AF and non-AF anatomies.
Results: We verified that the ULAAC system provides an adequate representation to visualize data distributions on the LAA surface and to build POD-based reduced-order models. These models revealed significant differences in LAA flow patterns for atrial geometries that underwent adverse atrial remodeling and experienced elevated blood stasis. Together with anatomical morphing-based patient-specific data augmentation, this approach could facilitate data-driven analyses to identify flow features associated with thrombosis risk due to atrial remodeling.
△ Less
Submitted 8 April, 2024; v1 submitted 9 October, 2023;
originally announced October 2023.
-
CompF2: Theoretical Calculations and Simulation Topical Group Report
Authors:
Peter Boyle,
Kevin Pedro,
Ji Qiang
Abstract:
This report summarizes the work of the Computational Frontier topical group on theoretical calculations and simulation for Snowmass 2021. We discuss the challenges, potential solutions, and needs facing six diverse but related topical areas that span the subject of theoretical calculations and simulation in high energy physics (HEP): cosmic calculations, particle accelerator modeling, detector sim…
▽ More
This report summarizes the work of the Computational Frontier topical group on theoretical calculations and simulation for Snowmass 2021. We discuss the challenges, potential solutions, and needs facing six diverse but related topical areas that span the subject of theoretical calculations and simulation in high energy physics (HEP): cosmic calculations, particle accelerator modeling, detector simulation, event generators, perturbative calculations, and lattice QCD (quantum chromodynamics). The challenges arise from the next generations of HEP experiments, which will include more complex instruments, provide larger data volumes, and perform more precise measurements. Calculations and simulations will need to keep up with these increased requirements. The other aspect of the challenge is the evolution of computing landscape away from general-purpose computing on CPUs and toward special-purpose accelerators and coprocessors such as GPUs and FPGAs. These newer devices can provide substantial improvements for certain categories of algorithms, at the expense of more specialized programming and memory and data access patterns.
△ Less
Submitted 16 September, 2022;
originally announced September 2022.
-
Lattice QCD and the Computational Frontier
Authors:
Peter Boyle,
Dennis Bollweg,
Richard Brower,
Norman Christ,
Carleton DeTar,
Robert Edwards,
Steven Gottlieb,
Taku Izubuchi,
Balint Joo,
Fabian Joswig,
Chulwoo Jung,
Christopher Kelly,
Andreas Kronfeld,
Meifeng Lin,
James Osborn,
Antonin Portelli,
James Richings,
Azusa Yamaguchi
Abstract:
The search for new physics requires a joint experimental and theoretical effort. Lattice QCD is already an essential tool for obtaining precise model-free theoretical predictions of the hadronic processes underlying many key experimental searches, such as those involving heavy flavor physics, the anomalous magnetic moment of the muon, nucleon-neutrino scattering, and rare, second-order electroweak…
▽ More
The search for new physics requires a joint experimental and theoretical effort. Lattice QCD is already an essential tool for obtaining precise model-free theoretical predictions of the hadronic processes underlying many key experimental searches, such as those involving heavy flavor physics, the anomalous magnetic moment of the muon, nucleon-neutrino scattering, and rare, second-order electroweak processes. As experimental measurements become more precise over the next decade, lattice QCD will play an increasing role in providing the needed matching theoretical precision. Achieving the needed precision requires simulations with lattices with substantially increased resolution. As we push to finer lattice spacing we encounter an array of new challenges. They include algorithmic and software-engineering challenges, challenges in computer technology and design, and challenges in maintaining the necessary human resources. In this white paper we describe those challenges and discuss ways they are being dealt with. Overcoming them is key to supporting the community effort required to deliver the needed theoretical support for experiments in the coming decade.
△ Less
Submitted 31 March, 2022;
originally announced April 2022.
-
Retinal vessel segmentation by probing adaptive to lighting variations
Authors:
Guillaume Noyel,
Christine Vartin,
Peter Boyle,
Laurent Kodjikian
Abstract:
We introduce a novel method to extract the vessels in eye fun-dus images which is adaptive to lighting variations. In the Logarithmic Image Processing framework, a 3-segment probe detects the vessels by probing the topographic surface of an image from below. A map of contrasts between the probe and the image allows to detect the vessels by a threshold. In a lowly contrasted image, results show tha…
▽ More
We introduce a novel method to extract the vessels in eye fun-dus images which is adaptive to lighting variations. In the Logarithmic Image Processing framework, a 3-segment probe detects the vessels by probing the topographic surface of an image from below. A map of contrasts between the probe and the image allows to detect the vessels by a threshold. In a lowly contrasted image, results show that our method better extract the vessels than another state-of the-art method. In a highly contrasted image database (DRIVE) with a reference , ours has an accuracy of 0.9454 which is similar or better than three state-of-the-art methods and below three others. The three best methods have a higher accuracy than a manual segmentation by another expert. Importantly, our method automatically adapts to the lighting conditions of the image acquisition.
△ Less
Submitted 29 April, 2020;
originally announced April 2020.
-
Registration of retinal images from Public Health by minimising an error between vessels using an affine model with radial distortions
Authors:
Guillaume Noyel,
R Thomas,
S Iles,
G Bhakta,
A Crowder,
D. Owens,
P. Boyle
Abstract:
In order to estimate a registration model of eye fundus images made of an affinity and two radial distortions, we introduce an estimation criterion based on an error between the vessels. In [1], we estimated this model by minimising the error between characteristics points. In this paper, the detected vessels are selected using the circle and ellipse equations of the overlap area boundaries deduce…
▽ More
In order to estimate a registration model of eye fundus images made of an affinity and two radial distortions, we introduce an estimation criterion based on an error between the vessels. In [1], we estimated this model by minimising the error between characteristics points. In this paper, the detected vessels are selected using the circle and ellipse equations of the overlap area boundaries deduced from our model. Our method successfully registers 96 % of the 271 pairs in a Public Health dataset acquired mostly with different cameras. This is better than our previous method [1] and better than three other state-of-the-art methods. On a publicly available dataset, ours still better register the images than the reference method.
△ Less
Submitted 17 April, 2019;
originally announced April 2019.
-
Multigrid for Wilson Clover Fermions in Grid
Authors:
Daniel Richtmann,
Peter A. Boyle,
Tilo Wettig
Abstract:
With the ever-growing number of computing architectures, performance portability is an important aspect of (Lattice QCD) software. The Grid library provides a good framework for writing such code, as it thoroughly separates hardware-specific code from algorithmic functionality and already supports many modern architectures. We describe the implementation of a multigrid solver for Wilson clover fer…
▽ More
With the ever-growing number of computing architectures, performance portability is an important aspect of (Lattice QCD) software. The Grid library provides a good framework for writing such code, as it thoroughly separates hardware-specific code from algorithmic functionality and already supports many modern architectures. We describe the implementation of a multigrid solver for Wilson clover fermions in Grid by the RQCD group. We present the features included in our implementation, discuss initial optimization efforts, and compare the performance with another multigrid implementation.
△ Less
Submitted 18 April, 2019;
originally announced April 2019.
-
Universal atrial coordinates applied to visualisation, registration and construction of patient specific meshes
Authors:
Caroline H Roney,
Ali Pashaei,
Marianna Meo,
Remi Dubois,
Patrick M Boyle,
Natalia A Trayanova,
Hubert Cochet,
Steven A Niederer,
Edward J Vigmond
Abstract:
Integrating spatial information about atrial physiology and anatomy in a single patient from multimodal datasets, as well as generalizing these data across patients, requires a common coordinate system. In the atria, this is challenging due to the complexity and variability of the anatomy. We aimed to develop and validate a universal atrial coordinate system for the following applications: combina…
▽ More
Integrating spatial information about atrial physiology and anatomy in a single patient from multimodal datasets, as well as generalizing these data across patients, requires a common coordinate system. In the atria, this is challenging due to the complexity and variability of the anatomy. We aimed to develop and validate a universal atrial coordinate system for the following applications: combination and assessment of multimodal data; comparison of spatial data across patients; 2D visualization; and construction of patient specific geometries to test mechanistic hypotheses. Left and right atrial LGE-MRI data were segmented and meshed. Two coordinates were calculated for each atrium by solving Laplace's equation, with boundary conditions assigned using five landmark points. The coordinate system was used to map spatial information between atrial meshes, including atrial anatomic structures and fibre directions from a reference geometry. Average error in point transfer from a source mesh to a destination mesh and back again was less than 6% of the average mesh element edge length. Scalar map** from electroanatomic to MRI geometries was compared to an affine registration technique (mean difference in bipolar voltage: <10% of voltage range). Patient specific meshes were constructed using UACs and phase singularity density maps from arrhythmia simulations were visualised in 2D. We have developed a universal atrial coordinate system allowing automatic registration of imaging and electroanatomic map** data, 2D visualisation, and patient specific model creation, using just five landmark points.
△ Less
Submitted 15 October, 2018;
originally announced October 2018.
-
Machines and Algorithms
Authors:
Peter A Boyle
Abstract:
I discuss the evolution of computer architectures with a focus on QCD and with reference to the interplay between architecture, engineering, data motion and algorithms. New architectures are discussed and recent performance results are displayed. I also review recent progress in multilevel solver and integation algorithms.
I discuss the evolution of computer architectures with a focus on QCD and with reference to the interplay between architecture, engineering, data motion and algorithms. New architectures are discussed and recent performance results are displayed. I also review recent progress in multilevel solver and integation algorithms.
△ Less
Submitted 1 February, 2017;
originally announced February 2017.
-
Equilibrium reconstruction with 3D eddy currents in the Lithium Tokamak eXperiment
Authors:
C. Hansen,
D. P. Boyle,
J. C. Schmitt,
R. Majeski
Abstract:
Axisymmetric free-boundary equilibrium reconstructions of tokamak plasmas in the Lithium Tokamak eXperiment (LTX) are performed using the PSI-Tri equilibrium code. Reconstructions in LTX are complicated by the presence of long-lived non-axisymmetric eddy currents generated by vacuum vessel and first wall structures. To account for this effect, reconstructions are performed with additional toroidal…
▽ More
Axisymmetric free-boundary equilibrium reconstructions of tokamak plasmas in the Lithium Tokamak eXperiment (LTX) are performed using the PSI-Tri equilibrium code. Reconstructions in LTX are complicated by the presence of long-lived non-axisymmetric eddy currents generated by vacuum vessel and first wall structures. To account for this effect, reconstructions are performed with additional toroidal current sources in these conducting regions. The source distributions are fixed poloidally, but their scale is adjusted as part of the full reconstruction. Eddy distributions are computed by toroidally averaging currents, generated by coupling to vacuum field coils, from a simplified 3D filament model of important conducting structures. The full 3D eddy current fields are also used to enable the inclusion of local magnetic field measurements, which have strong 3D eddy current pick-up, as reconstruction constraints. Using this method, equilibrium reconstruction yields good agreement with all available diagnostic signals. An accompanying field perturbation produced by 3D eddy currents on the plasma surface with primarily n=2, m=1 character is also predicted for these equilibria.
△ Less
Submitted 20 January, 2017;
originally announced January 2017.
-
Silicon photomultiplier-based Compton Telescope for Safety and Security (SCoTSS)
Authors:
Laurel E. Sinclair,
Patrick R. B. Saull,
David S. Hanna,
Henry C. J. Seywerd,
Audrey M. L. MacLeod,
Patrick J. Boyle
Abstract:
A Compton gamma imager has been developed for use in consequence management operations and in security investigations. The imager uses solid inorganic scintillator, known for robust performance in field survey conditions. The design was constrained in overall size by the requirement that it be person transportable and operable from a variety of platforms. In order to introduce minimal dead materia…
▽ More
A Compton gamma imager has been developed for use in consequence management operations and in security investigations. The imager uses solid inorganic scintillator, known for robust performance in field survey conditions. The design was constrained in overall size by the requirement that it be person transportable and operable from a variety of platforms. In order to introduce minimal dead material in the path of the incoming and scattered gamma rays, custom silicon photomultipliers (SiPMs), with a thin glass substrate, were used to collect the scintillation light from the scatter layers. To move them out of the path of the gamma rays, preamplification electronics for the silicon photomultipliers were located a distance from the imager. This imager, the Silicon photomultiplier Compton Telescope for Safety and Security (SCoTSS) is able to provide a one-degree image resolution in a plus-minus 45 degree field of view for a 10 mCi point source 40 m distant, within about one minute, for gamma-ray energies ranging from 344 keV to 1274 keV. Here, we present a comprehensive performance study of the SCoTSS imager.
△ Less
Submitted 8 January, 2016;
originally announced January 2016.
-
A Directional Gamma-Ray Detector Based on Scintillator Plates
Authors:
D. Hanna,
L. Sagnières,
P. Boyle,
A. M. L. MacLeod
Abstract:
A simple device for determining the azimuthal location of a source of gamma radiation, using ideas from astrophysical gamma-ray burst detection, is described. A compact and robust detector built from eight identical modules, each comprising a plate of CsI(Tl) scintillator coupled to a photomultiplier tube, can locate a point source of gamma rays with degree-scale precision by comparing the count r…
▽ More
A simple device for determining the azimuthal location of a source of gamma radiation, using ideas from astrophysical gamma-ray burst detection, is described. A compact and robust detector built from eight identical modules, each comprising a plate of CsI(Tl) scintillator coupled to a photomultiplier tube, can locate a point source of gamma rays with degree-scale precision by comparing the count rates in the different modules. Sensitivity to uniform environmental background is minimal.
△ Less
Submitted 17 June, 2015;
originally announced June 2015.
-
Development of a Compton imager based on bars of scintillator
Authors:
A. M. L. MacLeod,
P. J. Boyle,
D. S. Hanna,
P. R. B. Saull,
L. E. Sinclair,
H. C. J. Seywerd
Abstract:
We have developed a compact Compton gamma-ray imager with a large field of view and a low channel-count that is capable of quickly localizing gamma-ray sources in the few hundred keV - several MeV range. The two detector planes (scatter and absorber) employ bars of NaI(Tl) read out by photomultiplier tubes (PMTs) located at each end. The long-range imaging performance has been tested from 392 keV…
▽ More
We have developed a compact Compton gamma-ray imager with a large field of view and a low channel-count that is capable of quickly localizing gamma-ray sources in the few hundred keV - several MeV range. The two detector planes (scatter and absorber) employ bars of NaI(Tl) read out by photomultiplier tubes (PMTs) located at each end. The long-range imaging performance has been tested from 392 keV to 1274 keV. An angular resolution measure of 2.72 +/- 0.06 degrees and an efficiency of (1.79 +/- 0.04) x 10^(-3) at 662 keV is obtained. A Cs-137 (662 keV) source equivalent to a 10 mCi source 40 m away can be located in 60 seconds with an uncertainty of about a degree. No significant degradation in imaging performance is observed for source angles up to 40 degrees off axis.
△ Less
Submitted 16 June, 2015;
originally announced June 2015.
-
Quantum beat spectroscopy: stimulated emission probe of hyperfine quantum beats in the atomic Cs 8p $^{2}P_{3/2}$ level
Authors:
S. B. Bayram,
P. Arndt,
O. I. Popov,
C. Guney,
W. P. Boyle,
M. D. Havey,
J. McFarland
Abstract:
Measurements of hyperfine polarization quantum beats are used determine the magnetic dipole (A) and electric quadrupole (B) coupling constants in the excited atomic Cs 8p level. The experimental approach is a novel combination of pulsed optical pum** and time-delayed stimulated emission probing of the excited level. From the measured evolution of the atomic linear polarization degree as a functi…
▽ More
Measurements of hyperfine polarization quantum beats are used determine the magnetic dipole (A) and electric quadrupole (B) coupling constants in the excited atomic Cs 8p level. The experimental approach is a novel combination of pulsed optical pum** and time-delayed stimulated emission probing of the excited level. From the measured evolution of the atomic linear polarization degree as a function of probe delay time, we determine the hyperfine coupling constants A = 7.42(6) MHz and B = 0.14(29) MHz.
△ Less
Submitted 20 October, 2014; v1 submitted 1 September, 2014;
originally announced September 2014.
-
First demonstration of a Compton gamma imager based on silicon photomultipliers
Authors:
P. R. B. Saull,
L. E. Sinclair,
H. C. J. Seywerd,
D. S. Hanna,
P. J. Boyle,
A. M. L. MacLeod
Abstract:
We are develo** a rugged and person-transportable Compton gamma imager for use in security investigations of radioactive materials, and for radiological incident remediation. The imager is composed of layers of scintillator with light collection for the forward layers provided by silicon photomultipliers and for the rear layer by photomultiplier tubes. As a first step, we have developed a 1/5th-…
▽ More
We are develo** a rugged and person-transportable Compton gamma imager for use in security investigations of radioactive materials, and for radiological incident remediation. The imager is composed of layers of scintillator with light collection for the forward layers provided by silicon photomultipliers and for the rear layer by photomultiplier tubes. As a first step, we have developed a 1/5th-scale demonstration unit of the final imager. We present the imaging performance of this demonstration unit for Cs-137 at angles of up to 30 degrees off-axis. Results are also presented for Sn-113 and Na-22. This represents the first demonstration of the use of silicon photomultipliers as an embedded component for light collection in a Compton gamma imager.
△ Less
Submitted 3 July, 2012;
originally announced July 2012.
