-
Combine Influences of Nanoparticulate Hematite Thin Film Thickness, Roughness, and Weight on Its Photoelectrochemical Performance and Viscous/ Thermal Characteristics of Source Precursor
Authors:
Romy Loehnert,
Artur Braun,
Debajeet K. Bora
Abstract:
The objective of this work was to investigate the photoelectrochemical (PEC) performance of nanoparticulate hematite thin film photoelectrodes prepared by a soft-chemistry route. Two cost-effective thin film fabrication techniques were employed to deposit the hematite film. First, the film was deposited on conducting glass substrates by dip coating of the organic precursor containing fatty acid de…
▽ More
The objective of this work was to investigate the photoelectrochemical (PEC) performance of nanoparticulate hematite thin film photoelectrodes prepared by a soft-chemistry route. Two cost-effective thin film fabrication techniques were employed to deposit the hematite film. First, the film was deposited on conducting glass substrates by dip coating of the organic precursor containing fatty acid derivatives of iron salts. Process parameters such as the concentration of iron oleic acid derivative precursor solution, the thickness of the organic film, before annealing and the number of deposited layers along with their weight and roughness were studied. In the second approach, the influence of the spin coating process on film formation and respective photoelectrochemical (PEC) performance have been discussed. It was found that the PEC performance of spin-coated samples was lower than that of dip coated samples due to the effect of films rough and smooth characteristics. It is found that the rough surface of the photoelectrode is a prerequisite to achieving good photocurrent values. Here, three-layer samples with roughness between 600nm to 800nm and bulk thickness up to 700nm provided photocurrent densities of 0.6mA/cm2. In part 2 of the manuscript, we have elaborately discussed the roughness and smooth behavior of thin films using X-ray reflectometry technique. Followed by this, a detailed account of the viscous and thermal properties of the fatty acid derivatives of iron precursor have been discussed.
△ Less
Submitted 27 March, 2024;
originally announced March 2024.
-
X-ray reflectometric studies of nanoparticulate hematite films to decouple the rough and smooth behaviors of it and crystallographic and morphological properties concerning fatty acid chain length
Authors:
Debajeet K. Bora,
Romy Loehnart,
Artur Braun
Abstract:
In this study, the use of X-Ray reflectometry technique signifies the types of rough and smooth surfaces of hematite film prepared from different fatty acid derivatives of the iron salt. Followed by this, the film morphology and crystallographic properties concerning different fatty acid chain length have been discussed.
In this study, the use of X-Ray reflectometry technique signifies the types of rough and smooth surfaces of hematite film prepared from different fatty acid derivatives of the iron salt. Followed by this, the film morphology and crystallographic properties concerning different fatty acid chain length have been discussed.
△ Less
Submitted 27 March, 2024;
originally announced March 2024.
-
Performance limitation of Si Nanowire solar cells: Effects of nanowire length and surface defects
Authors:
Deepika Bora,
Shrestha Bhattacharya,
Nitin Kumar,
Aishik Basu Mallick,
Avriti Srivastava,
Mrinal Dutta,
Sanjay K. Srivastava,
P. Prathap,
C. M. S. Rauthan
Abstract:
In Si nanowire (SiNW) solar cells enhanced light confinement property in addition to decoupling of charge carrier collection and light absorption directions plays a significant role to resolve the draw backs of bulk Si solar cells. In this report we have studied the dependence of the phovoltaic properties of Si NW array solar cells on the SiNW length and enhanced surface defect states as a result…
▽ More
In Si nanowire (SiNW) solar cells enhanced light confinement property in addition to decoupling of charge carrier collection and light absorption directions plays a significant role to resolve the draw backs of bulk Si solar cells. In this report we have studied the dependence of the phovoltaic properties of Si NW array solar cells on the SiNW length and enhanced surface defect states as a result of enhanced surface area of the NWs. The SiNW arrays have been fabricated using metal catalyzed electroless etching (MCEE) technique. p-n junction has been produced by spin-on-dopant technique followed by thermal diffusion process. Front and rear electrodes have been deposited by e-beam evaporation techniques. SiNW lengths have been controlled from ~ 320 nm to 6.4 micro meter by controlling the parameters of MCEE technique. Photovoltaic properties of the solar cells have been characterized by measuring quantum efficiency and photocurrent density vs. voltage characteristics. Morphological studies have been carried out by using scanning electron microscopy. Reduction in light trap** capability comes at the benefit of reduced surface defects. The reduction of surface defects has been proved to be more advantageous in comparison to the decrement of light trap** capability. The major contribution to the changes in cell efficiency comes from the enhancement of short circuit current density with a very weak dependence on open circuit voltage. This work is beneficial for the production commercial Si solar cell where SiNW arrays could be used as a antireflection coating instead of using separate antireflection layers and thus could reduced the production cost.
△ Less
Submitted 16 September, 2019;
originally announced September 2019.
-
Plasma heating due to X-B mode conversion in a cylindrical ECR plasma system
Authors:
Vipin K. Yadav,
D. Bora
Abstract:
Extra Ordinary (X) mode conversion to Bernstein wave near Upper Hybrid Resonance (UHR) layer plays an important role in plasma heating through cyclotron resonance. Wave generation at UHR and parametric decay at high power has been observed during Electron Cyclotron Resonance (ECR) heating experiments in toroidal magnetic fusion devices. A small linear system with ECR and UHR layer within the sys…
▽ More
Extra Ordinary (X) mode conversion to Bernstein wave near Upper Hybrid Resonance (UHR) layer plays an important role in plasma heating through cyclotron resonance. Wave generation at UHR and parametric decay at high power has been observed during Electron Cyclotron Resonance (ECR) heating experiments in toroidal magnetic fusion devices. A small linear system with ECR and UHR layer within the system has been used to conduct experiments on X-B conversion and parametric decay process as a function of system parameters. Direct probing {\em in situ} is conducted and plasma heating is evidenced by soft x-ray emission measurement. Experiments are performed with hydrogen plasma produced with 160-800 W microwave power at 2.45 GHz of operating frequency at $10^{-3}$ mbar pressure. The axial magnetic field required for ECR is such that the resonant surface (B = 875 G) is situated at the geometrical axis of the plasma system. Experimental results will be presented in the paper.
△ Less
Submitted 6 November, 2004; v1 submitted 16 October, 2004;
originally announced October 2004.
