-
Holographic Volumetric Additive Manufacturing
Authors:
Maria I. Álvarez-Castaño,
Andreas Gejl Madsen,
Jorge Madrid-Wolff,
Antoine Boniface,
Jesper Glückstad,
Christophe Moser
Abstract:
3D printing has revolutionized the manufacturing of volumetric components and structures in many areas. Different technologies have been developed including light-induced techniques based on the photopolymerization of liquid resins. In particular, a recently introduced method, so-called Tomographic Volumetric AM (VAM), allows the fabrication of mesoscale objects within tens of seconds without the…
▽ More
3D printing has revolutionized the manufacturing of volumetric components and structures in many areas. Different technologies have been developed including light-induced techniques based on the photopolymerization of liquid resins. In particular, a recently introduced method, so-called Tomographic Volumetric AM (VAM), allows the fabrication of mesoscale objects within tens of seconds without the need for support structures. This method works by projecting thousands of amplitude patterns, computed via a reverse tomography algorithm, into a resin from different angles to produce the desired three-dimensional shape when the resin reaches the polymerization threshold. To date, only amplitude modulation of the patterns has been reported. Here, we show that holographic phase modulation unlocks new capabilities for VAM printing. Specifically, the effective light projection efficiency is improved by at least a factor of 10 over amplitude coding; the resolution can reach the light diffraction limit; and phase encoding allows to control ballistic photons in scattering media, which potentially increases the volume of 3D objects that can be printed in opaque and non-absorbing resins. The approach uses CGH to convert phase, encoded on a 2D modulator to the desired intensity projections by light propagation in a photosensitive resin container. We demonstrate the potential of holographic phase coding using simulations and experiments, the latter by implementing a volumetric printer using a DMD, as the 2D phase modulator in a Fourier configuration. Specifically, we use Lee holograms to encode phase onto a binary DMD. Combining tiled holograms with PSF sha** mitigates the speckle noise typically associated with computer-generated holograms and speed-up their computation. We use these holographic projections to fabricate millimetric 3D objects in less than a minute with a resolution down to 164 um.
△ Less
Submitted 24 January, 2024;
originally announced January 2024.
-
Single-Photon-Assisted Two-Photon Polymerization
Authors:
Buse Unlu,
Maria Isabel Álvarez-Castaño,
Antoine Boniface,
Ye Pu,
Christophe Moser
Abstract:
Light-based additive manufacturing (AM) has revolutionized the fabrication of complex three-dimensional (3D) objects offering a cost-effective and high-speed alternative to traditional machining. One-photon polymerization is a key process in this advancement, standing out for rapid printing time, albeit with limited resolution. Two-photon polymerization (2PP) empowers AM with unprecedented resolut…
▽ More
Light-based additive manufacturing (AM) has revolutionized the fabrication of complex three-dimensional (3D) objects offering a cost-effective and high-speed alternative to traditional machining. One-photon polymerization is a key process in this advancement, standing out for rapid printing time, albeit with limited resolution. Two-photon polymerization (2PP) empowers AM with unprecedented resolution but is accompanied by a tradeoff of prolonged printing times. We propose combining the single-photon absorption (1PA) and 2PP to benefit from the dual capabilities, allowing for faster printing while maintaining high resolution and improved depth sectioning, respectively. In this study, we employ a blue light source to pre-excite a photocurable resin by 1PA followed by a precisely focused femtosecond (fs) beam to provide the missing energy necessary to reach the polymerization threshold to solidify the resin through two-photon absorption. First, we investigate the impact of pre-sensitization by blue light illumination on 2PP and demonstrate one order of magnitude faster printing time for a voxel size of 150 nm as compared to the same voxel size printed by 2PP only. Then, we build a custom 2PP printer utilizing blue light sensitization in a light-sheet mode and demonstrate successful 3D prints.
△ Less
Submitted 22 January, 2024;
originally announced January 2024.
-
Light focusing and additive manufacturing through highly scattering media using upconversion nanoparticles
Authors:
Qianyi Zhang,
Antoine Boniface,
Virendra K. Parashar,
Martin A. M. Gijs,
Christophe Moser
Abstract:
Light-based additive manufacturing holds great potential in the field of bioprinting due to its exceptional spatial resolution, enabling the reconstruction of intricate tissue structures. However, printing through biological tissues is severely limited due to the strong optical scattering within the tissues. The propagation of light is scrambled to form random speckle patterns, making it impossibl…
▽ More
Light-based additive manufacturing holds great potential in the field of bioprinting due to its exceptional spatial resolution, enabling the reconstruction of intricate tissue structures. However, printing through biological tissues is severely limited due to the strong optical scattering within the tissues. The propagation of light is scrambled to form random speckle patterns, making it impossible to print features at the diffraction-limited size with conventional printing approaches. The poor tissue penetration depth of ultra-violet or blue light, which is commonly used to trigger photopolymerization, further limits the fabrication of high cell-density tissue constructs. Recently, several strategies based on wavefront sha** have been developed to manipulate the light and refocus it inside scattering media to a diffraction-limited spot. In this study, we present a high-resolution additive manufacturing technique using upconversion nanoparticles and a wavefront sha** method that does not require measurement from an invasive detector, i.e., it is a non-invasive technique. Upconversion nanoparticles convert near-infrared light to ultraviolet and visible light. The ultraviolet light serves as a light source for photopolymerization and the visible light as a guide star for digital light sha**. The incident light pattern is manipulated using the feedback information of the guide star to focus light through the tissue. In this way, we experimentally demonstrate that near-infrared light can be non-invasively focused through a strongly scattering medium. By exploiting the optical memory effect, we further demonstrate micro-meter resolution additive manufacturing through highly scattering media such as a 300-μm-thick chicken breast. This study provides a proof of concept of high-resolution additive manufacturing through turbid media with potential application in tissue engineering.
△ Less
Submitted 30 October, 2023;
originally announced October 2023.
-
Multi-photon polymerization using upconversion nanoparticles for tunable feature-size printing
Authors:
Qianyi Zhang,
Antoine Boniface,
Virendra K. Parashar,
Martin A. M. Gijs,
Christophe Moser
Abstract:
The recent development of light-based 3D printing technologies has marked a turning point in additive manufacturing. Through photopolymerization, liquid resins can be solidified into complex objects. Usually, the polymerization is triggered by exciting a photoinitiator with ultraviolet (UV) or blue light. In two-photon printing (TPP), the excitation is done through the non-linear absorption of two…
▽ More
The recent development of light-based 3D printing technologies has marked a turning point in additive manufacturing. Through photopolymerization, liquid resins can be solidified into complex objects. Usually, the polymerization is triggered by exciting a photoinitiator with ultraviolet (UV) or blue light. In two-photon printing (TPP), the excitation is done through the non-linear absorption of two photons; it enables printing 100-nm voxels but requires expensive femtosecond lasers which strongly limits their broad dissemination. Upconversion nanoparticles (UCNPs) have recently been proposed as an alternative to TPP for photopolymerization but using continuous-wave lasers. UCNPs convert near-infrared (NIR) into visible/UV light to initiate the polymerization locally as in TPP. Here we provide a study of this multi-photon mechanism and demonstrate how the non-linearity impacts the printing process. In particular, we report on the possibility of fine-tuning the size of the printed voxel by adjusting the NIR excitation intensity. Using gelatin-based hydrogel, we are able to vary the transverse voxel size from 1.3 to 2.8 μm and the axial size from 7.7 to 59 μm by adjusting the NIR power without changing the degree of polymerization. This work opens up new opportunities for speeding up the fabrication while preserving the minimum feature size with cheap light sources.
△ Less
Submitted 2 November, 2022;
originally announced November 2022.
-
Volumetric Helical Additive Manufacturing
Authors:
Antoine Boniface,
Florian Maitre,
Jorge Madrid-Wolff,
Christophe Moser
Abstract:
3D printing has revolutionized the manufacturing of volumetric components and structures for various fields. Thanks to the advent of photocurable resins, several fully volumetric light-based techniques have been recently developed to overcome the current limitations of 3D printing. Although fast, this new generation of printers cannot fabricate objects whose size typically exceeds the centimeter w…
▽ More
3D printing has revolutionized the manufacturing of volumetric components and structures for various fields. Thanks to the advent of photocurable resins, several fully volumetric light-based techniques have been recently developed to overcome the current limitations of 3D printing. Although fast, this new generation of printers cannot fabricate objects whose size typically exceeds the centimeter without severely affecting the final resolution. Based on tomographic volumetric additive manufacturing, we propose a method for volumetric helical additive manufacturing (VHAM) multi-cm scale structures without magnifying the projected patterns. It consists of illuminating the photoresist while the latter follows a helical motion. This movement allows for increasing the height of the printable object. Additionally, we off-center the modulator used for projecting the light patterns to double the object's lateral size. We demonstrate experimentally the interest in using these two tricks for printing larger objects (up to 3 cm x 3 cm x 5 cm) while maintaining high resolution (< 200 um) and short print time (< 10 min).
△ Less
Submitted 26 October, 2022;
originally announced October 2022.
-
Physics-based neural network for non-invasive control of coherent light in scattering media
Authors:
Alexandra d'Arco,
Fei Xia,
Antoine Boniface,
Jonathan Dong,
Sylvain Gigan
Abstract:
Optical imaging through complex media, such as biological tissues or fog, is challenging due to light scattering. In the multiple scattering regime, wavefront sha** provides an effective method to retrieve information; it relies on measuring how the propagation of different optical wavefronts are impacted by scattering. Based on this principle, several wavefront sha** techniques were successfu…
▽ More
Optical imaging through complex media, such as biological tissues or fog, is challenging due to light scattering. In the multiple scattering regime, wavefront sha** provides an effective method to retrieve information; it relies on measuring how the propagation of different optical wavefronts are impacted by scattering. Based on this principle, several wavefront sha** techniques were successfully developed, but most of them are highly invasive and limited to proof-of-principle experiments. Here, we propose to use a neural network approach to non-invasively characterize and control light scattering inside the medium and also to retrieve information of hidden objects buried within it. Unlike most of the recently-proposed approaches, the architecture of our neural network with its layers, connected nodes and activation functions has a true physical meaning as it mimics the propagation of light in our optical system. It is trained with an experimentally-measured input/output dataset built from a series of incident light patterns and corresponding camera snapshots. We apply our physics-based neural network to a fluorescence microscope in epi-configuration and demonstrate its performance through numerical simulations and experiments. This flexible method can include physical priors and we show that it can be applied to other systems as, for example, non-linear or coherent contrast mechanisms.
△ Less
Submitted 1 June, 2022;
originally announced June 2022.
-
Non-invasive chemically selective energy delivery and focusing inside a scattering medium guided by Raman scattering
Authors:
Bingxin Tian,
Bernhard Rauer,
Antoine Boniface,
Jun Han,
Sylvain Gigan,
Hilton B. de Aguiar,
Hilton de Aguiar
Abstract:
Raman scattering is a chemically selective probing mechanism with diverse applications in industry and clinical settings. Yet, most samples are optically opaque limiting the applicability of Raman probing at depth. Here, we demonstrate chemically selective energy deposition behind a scattering medium by combining prior information on the chemical's spectrum with the measurement of a spectrally res…
▽ More
Raman scattering is a chemically selective probing mechanism with diverse applications in industry and clinical settings. Yet, most samples are optically opaque limiting the applicability of Raman probing at depth. Here, we demonstrate chemically selective energy deposition behind a scattering medium by combining prior information on the chemical's spectrum with the measurement of a spectrally resolved Raman speckle as a feedback mechanism for wavefront sha**. We demonstrate unprecedented six-fold signal enhancement in an epi-geometry, realizing targeted energy deposition and focusing on selected Raman active particles.
△ Less
Submitted 21 February, 2022;
originally announced February 2022.
-
Tomographic Volumetric Additive Manufacturing of Silicon Oxycarbide Ceramics
Authors:
Max Kollep,
Georgia Konstantinou,
Jorge Madrid-Wolff,
Antoine Boniface,
Pradeep Vallachira Warriam Sasikumar,
Gurdial Blugan,
Paul Delrot,
Damien Loterie,
Christophe Moser
Abstract:
Ceramics are highly technical materials with properties of interest for multiple industries. Precisely because of their high chemical, thermal, and mechanical resistance, ceramics are difficult to mold into complex shapes. A possibility to make convoluted ceramic parts is to use preceramic polymers (PCP) in liquid form. The PCP resin is first solidified in a desired geometry and then transformed i…
▽ More
Ceramics are highly technical materials with properties of interest for multiple industries. Precisely because of their high chemical, thermal, and mechanical resistance, ceramics are difficult to mold into complex shapes. A possibility to make convoluted ceramic parts is to use preceramic polymers (PCP) in liquid form. The PCP resin is first solidified in a desired geometry and then transformed into ceramic compounds through a pyrolysis step that preserves the shape. Light-based additive manufacturing (AM) is a promising route to achieve solidification of the PCP resin. Different approaches, such as stereolithography, have already been proposed but they all rely on a layer-by-layer printing process which sets limitations on the printing speed and object geometry. Here, we report on the fabrication of complex 3D centimeter-scale ceramic parts by using tomographic volumetric printing which is fast, high resolution and offers a lot of freedom in terms of geometrical design compared to state-of-the-art AM techniques. First, we formulated a photosensitive preceramic resin that was solidified by projecting light patterns from multiple angles. Then, the obtained 3D printed parts were converted into ceramics by pyrolyzing them in a furnace. We demonstrate the strength of this approach through the fabrication of dense microcomponents exhibiting overhangs and hollow geometries without the need of supporting structures, and characterize their resistance to high heat and harsh chemical treatments.
△ Less
Submitted 26 September, 2021;
originally announced September 2021.
-
Large field-of-view non-invasive imaging through scattering layers using fluctuating random illumination
Authors:
Lei Zhu,
Fernando Soldevila,
Claudio Moretti,
Alexandra d'Arco,
Antoine Boniface,
Xiaopeng Shao,
Hilton B. de Aguiar,
Sylvain Gigan
Abstract:
On-invasive optical imaging techniques are essential diagnostic tools in many fields. Although various recent methods have been proposed to utilize and control light in multiple scattering media, non-invasive optical imaging through and inside scattering layers across a large field of view remains elusive due to the physical limits set by the optical memory effect, especially without wavefront sha…
▽ More
On-invasive optical imaging techniques are essential diagnostic tools in many fields. Although various recent methods have been proposed to utilize and control light in multiple scattering media, non-invasive optical imaging through and inside scattering layers across a large field of view remains elusive due to the physical limits set by the optical memory effect, especially without wavefront sha** techniques. Here, we demonstrate an approach that enables non-invasive fluorescence imaging behind scattering layers with field-of-views extending well beyond the optical memory effect. The method consists in demixing the speckle patterns emitted by a fluorescent object under variable unknown random illumination, using matrix factorization and a novel fingerprint-based reconstruction. Experimental validation shows the efficiency and robustness of the method with various fluorescent samples, covering a field of view up to three times the optical memory effect range. Our non-invasive imaging technique is simple, neither requires a spatial light modulator nor a guide star, and can be generalized to a wide range of incoherent contrast mechanisms and illumination schemes.
△ Less
Submitted 16 July, 2021;
originally announced July 2021.
-
Light-based Volumetric Additive Manufacturing in Scattering Resins
Authors:
Jorge Madrid-Wolff,
Antoine Boniface,
Damien Loterie,
Paul Delrot,
Christophe Moser
Abstract:
3D printing has revolutionized the manufacturing of volumetric components and structures for use in various fields. Owing to the advent of photo-curable resins, several fully volumetric light-based techniques have been recently developed to push further the resolution and speed limitations of 3D printing. However, these new approaches only work with homogeneous and relatively transparent resins so…
▽ More
3D printing has revolutionized the manufacturing of volumetric components and structures for use in various fields. Owing to the advent of photo-curable resins, several fully volumetric light-based techniques have been recently developed to push further the resolution and speed limitations of 3D printing. However, these new approaches only work with homogeneous and relatively transparent resins so that the incident light patterns used for photo-polymerization are not impacted along their propagation through the material. Herein, we describe a strategy to print in scattering materials. It consists of characterizing how light is distorted by the curable resin and then applying a digital correction to the light patterns to counteract the effect of scattering. Using a tomographic volumetric printer, we experimentally demonstrate the importance of taking light scattering into account when computing the projected patterns and show that our applied correction significantly improves printability, even when the object size exceeds the scattering mean free path of light.
△ Less
Submitted 31 May, 2021;
originally announced May 2021.
-
Spectrally-resolved point-spread-function engineering using a complex medium
Authors:
Antoine Boniface,
Mickaël Mounaix,
Baptiste Blochet,
Hilton B. de Aguiar,
Fabien Quéré,
Sylvain Gigan
Abstract:
Propagation of an ultrashort pulse of light through strongly scattering media generates an intricate spatio-spectral speckle that can be described by means of the multi-spectral transmission matrix (MSTM). In conjunction with a spatial light modulator, the MSTM enables the manipulation of the pulse leaving the medium; in particular focusing it at any desired spatial position and/or time. Here, we…
▽ More
Propagation of an ultrashort pulse of light through strongly scattering media generates an intricate spatio-spectral speckle that can be described by means of the multi-spectral transmission matrix (MSTM). In conjunction with a spatial light modulator, the MSTM enables the manipulation of the pulse leaving the medium; in particular focusing it at any desired spatial position and/or time. Here, we demonstrate how to engineer the point-spread-function of the focused beam both spatially and spectrally, from the measured MSTM. It consists in numerically filtering the spatial content at each wavelength of the matrix prior to focusing. We experimentally report on the versatility of the technique through several examples, in particular as an alternative to simultaneous spatial and temporal focusing, with potential applications in multiphoton microscopy.
△ Less
Submitted 17 July, 2020;
originally announced July 2020.
-
Non-invasive focusing and imaging in scattering media with a fluorescence-based transmission matrix
Authors:
Antoine Boniface,
Jonathan Dong,
Sylvain Gigan
Abstract:
In biological microscopy, light scattering represents the main limitation to image at depth. Recently, a set of wavefront sha** techniques has been developed in order to manipulate coherent light in strongly disordered materials. The Transmission Matrix approach has shown its capability to inverse the effect of scattering and efficiently focus light. In practice, the matrix is usually measured u…
▽ More
In biological microscopy, light scattering represents the main limitation to image at depth. Recently, a set of wavefront sha** techniques has been developed in order to manipulate coherent light in strongly disordered materials. The Transmission Matrix approach has shown its capability to inverse the effect of scattering and efficiently focus light. In practice, the matrix is usually measured using an invasive detector or low-resolution acoustic guide stars. Here, we introduce a non-invasive and all-optical strategy based on linear fluorescence to reconstruct the transmission matrices, to and from a fluorescent object placed inside a scattering medium. It consists in demixing the incoherent patterns emitted by the object using low-rank factorizations and phase retrieval algorithms. We experimentally demonstrate the efficiency of this method through robust and selective focusing. Additionally, from the same measurements, it is possible to exploit memory effect correlations to image and reconstruct extended objects. This approach opens up a new route towards imaging in scattering media with linear or non-linear contrast mechanisms.
△ Less
Submitted 9 March, 2020;
originally announced March 2020.
-
Non-invasive light focusing in scattering media using speckle variance optimization
Authors:
Antoine Boniface,
Baptiste Blochet,
Jonathan Dong,
Sylvain Gigan
Abstract:
Optical imaging deep inside scattering media remains a fundamental problem in bio-imaging. While wavefront sha** has been shown to allow focusing of coherent light at depth, achieving it non-invasively remains a challenge. Various feedback mechanisms, in particular acoustic or non-linear fluorescence-based, have been put forward for this purpose. Non-invasive focusing at depth on fluorescent obj…
▽ More
Optical imaging deep inside scattering media remains a fundamental problem in bio-imaging. While wavefront sha** has been shown to allow focusing of coherent light at depth, achieving it non-invasively remains a challenge. Various feedback mechanisms, in particular acoustic or non-linear fluorescence-based, have been put forward for this purpose. Non-invasive focusing at depth on fluorescent objects with linear excitation is, however, still unresolved. Here we report a simple method for focusing inside a scattering medium in an epi-detection geometry with a linear signal: optimizing the spatial variance of low contrast speckle patterns emitted by a set of fluorescent sources. Experimentally, we demonstrate robust and efficient focusing of scattered light on a single source, and show that this variance optimization method is formally equivalent to previous optimization strategies based on two-photon fluorescence. Our technique should generalize to a large variety of incoherent contrast mechanisms and holds interesting prospects for deep bio-imaging.
△ Less
Submitted 4 June, 2019;
originally announced June 2019.
-
Transmission-matrix-based point-spread-function engineering through a complex medium
Authors:
Antoine Boniface,
Mickael Mounaix,
Baptiste Blochet,
Rafael Piestun,
Sylvain Gigan
Abstract:
We report a method to design at will the spatial profile of transmitted coherent light after propagation through a scattering sample. We compute an operator based on the experimentally measured transmission matrix, obtained by numerically adding an arbitrary mask in the Fourier domain prior to focusing. We demonstrate the strength of the technique through several examples: propagating Bessel beams…
▽ More
We report a method to design at will the spatial profile of transmitted coherent light after propagation through a scattering sample. We compute an operator based on the experimentally measured transmission matrix, obtained by numerically adding an arbitrary mask in the Fourier domain prior to focusing. We demonstrate the strength of the technique through several examples: propagating Bessel beams, thus generating foci smaller than the diffraction limited speckle grain, donut beams, and helical beams. We characterize the 3D profile of the achieved foci and analyze the fundamental limitations of the technique. Our approach generalizes Fourier optics concepts for random media, and opens in particular interesting perspectives for super-resolution imaging through turbid media.
△ Less
Submitted 1 September, 2016;
originally announced September 2016.