-
Simulation tools, first results and experimental status of the MURAVES experiment
Authors:
Andrea Giammanco,
Yanwen Hong,
Marwa Al Moussawi,
Fabio Ambrosino,
Antonio Anastasio,
Samip Basnet,
Lorenzo Bonechi,
Massimo Bongi,
Diletta Borselli,
Alan Bross,
Antonio Caputo,
Roberto Ciaranfi,
Luigi Cimmino,
Vitaliano Ciulli,
Raffaello D'Alessandro,
Mariaelena D'Errico,
Catalin Frosin,
Flora Giudicepietro,
Sandro Gonzi,
Giovanni Macedonio,
Vincenzo Masone,
Massimo Orazi,
Andrea Paccagnella,
Rosario Peluso,
Anna Pla-Dalmau
, et al. (7 additional authors not shown)
Abstract:
The MUon RAdiography of VESuvius (MURAVES) project aims at the study of Mt. Vesuvius, an active and hazardous volcano near Naples, Italy, with the use of muons freely and abundantly produced by cosmic rays. In particular, the MURAVES experiment intends to perform muographic imaging of the internal structure of the summit of Mt. Vesuvius. The challenging measurement of the rock density distribution…
▽ More
The MUon RAdiography of VESuvius (MURAVES) project aims at the study of Mt. Vesuvius, an active and hazardous volcano near Naples, Italy, with the use of muons freely and abundantly produced by cosmic rays. In particular, the MURAVES experiment intends to perform muographic imaging of the internal structure of the summit of Mt. Vesuvius. The challenging measurement of the rock density distribution in its summit by muography, in conjunction with data from other geophysical techniques, can help model possible eruption dynamics. The MURAVES apparatus consists of an array of three independent and identical muon trackers, with a total sensitive area of 3 square meters. In each tracker, a sequence of 4 XY tracking planes made of plastic scintillators is complemented by a 60 cm thick lead wall inserted between the two downstream planes to improve rejection of background from low energy muons. The apparatus is currently acquiring data. This paper presents preliminary results from the analysis of the first data samples acquired with trackers pointing towards Mt. Vesuvius, including the first relative measurement of the density projection of two flanks of the volcano at three different altitudes; we also present the workflow of the simulation chain of the MURAVES experiment and its ongoing developments.
△ Less
Submitted 19 June, 2024; v1 submitted 22 November, 2023;
originally announced November 2023.
-
Development of the photo-diode subsystem for the HERD calorimeter double-readout
Authors:
O. Adriani,
M. Antonelli,
A. Basti,
E. Berti,
P. Betti,
G. Bigongiari,
L. Bonechi,
M. Bongi,
V. Bonvicini,
S. Bottai,
P. Brogi,
G. Castellini,
C. Checchia,
J. Casaus,
X. Cui,
Y. Dong,
R. D'Alessandro,
S. Detti,
F. Giovacchini,
N. Finetti,
P. Maestro,
P. S. Marrocchesi,
X. Liu,
J. Marin,
G. Martinez
, et al. (18 additional authors not shown)
Abstract:
The measurement of cosmic-ray individual spectra provides unique information regarding the origin and propagation of astro-particles. Due to the limited acceptance of current space experiments, protons and nuclei around the "knee" region ($\sim1\ PeV$) can only be observed by ground based experiments. Thanks to an innovative design, the High Energy cosmic-Radiation Detection (HERD) facility will a…
▽ More
The measurement of cosmic-ray individual spectra provides unique information regarding the origin and propagation of astro-particles. Due to the limited acceptance of current space experiments, protons and nuclei around the "knee" region ($\sim1\ PeV$) can only be observed by ground based experiments. Thanks to an innovative design, the High Energy cosmic-Radiation Detection (HERD) facility will allow direct observation up to this energy region: the instrument is mainly based on a 3D segmented, isotropic and homogeneous calorimeter which properly measures the energy of particles coming from each direction and it will be made of about 7500 LYSO cubic crystals. The read-out of the scintillation light is done with two independent systems: the first one based on wave-length shifting fibers coupled to Intensified scientific CMOS cameras, the second one is made of two photo-diodes with different active areas connected to a custom front-end electronics. This photo-diode system is designed to achieve a huge dynamic range, larger than $10^7$, while having a small power consumption, few mW per channel. Thanks to a good signal-to-noise ratio, the capability of a proper calibration, by using signals of both non-interacting and showering particles, is also guaranteed. In this paper, the current design and the performance obtained by several tests of the photo-diode read-out system are discussed.
△ Less
Submitted 8 August, 2022;
originally announced August 2022.
-
The MURAVES experiment: study of the Vesuvius Great Cone with Muon Radiography
Authors:
M. D'Errico,
F. Ambrosino,
A. Anastasio,
S. Basnet,
L. Bonechi,
M. Bongi,
A. Bross,
R. Ciaranfi,
L. Cimmino,
C. Ciulli,
R. D'Alessandro,
A. Giammanco,
F. Giudicepietro,
S. Gonzi,
R. Karnam,
G. Macedonio,
V. Masone,
N. Mori,
M. Moussawi,
M. Orazi,
G. Passeggio,
R. Peluso,
A. Pla-Dalmau,
C. Rendon,
A. Samalan
, et al. (6 additional authors not shown)
Abstract:
The MURAVES experiment aims at the muographic imaging of the internal structure of the summit of Mt. Vesuvius, exploiting muons produced by cosmic rays. Though presently quiescent, the volcano carries a dramatic hazard in its highly populated surroundings. The challenging measurement of the rock density distribution in its summit by muography, in conjunction with data from other geophysical techni…
▽ More
The MURAVES experiment aims at the muographic imaging of the internal structure of the summit of Mt. Vesuvius, exploiting muons produced by cosmic rays. Though presently quiescent, the volcano carries a dramatic hazard in its highly populated surroundings. The challenging measurement of the rock density distribution in its summit by muography, in conjunction with data from other geophysical techniques, can help the modeling of possible eruptive dynamics. The MURAVES apparatus consists of an array of three independent and identical muon trackers, with a total sensitive area of 3 square meters. In each tracker, a sequence of 4 XY tracking planes made of plastic scintillators is complemented by a 60 cm thick lead wall inserted between the two downstream planes to improve rejection of background from low energy muons. The apparatus is currently acquiring data. Preliminary results from the analysis of a first data sample are presented.
△ Less
Submitted 24 February, 2022;
originally announced February 2022.
-
The simulations chain of the MURAVES experiment
Authors:
M. Moussawi,
S. Basnet,
L. Bonechi,
L. Cimmino,
R. DÁlessandro,
M. DÉrrico,
A. Giammanco,
R. Karnam,
G. Macedonio,
C. Rendon,
A. Samalan,
G. Saracino,
M. Tytgat
Abstract:
The MUon RAdiography of VESuvius (MURAVES) project aims at the study of the summital cone of Mt. Vesuvius, an active and hazardous volcano near Naples, Italy. A detailed Monte Carlo simulation framework is necessary in order to investigate the effects of the experimental constraints and to perform comparisons with the actual observations. Our Monte Carlo setup combines a variety of Monte Carlo pro…
▽ More
The MUon RAdiography of VESuvius (MURAVES) project aims at the study of the summital cone of Mt. Vesuvius, an active and hazardous volcano near Naples, Italy. A detailed Monte Carlo simulation framework is necessary in order to investigate the effects of the experimental constraints and to perform comparisons with the actual observations. Our Monte Carlo setup combines a variety of Monte Carlo programs that address different aspects of cosmic muon simulation, from muon generation in the Earth's upper atmosphere to the response of the detector, including the interactions with the material of the volcano. We will elaborate on the rationale for our technical choices, including trade-off between speed and accuracy, and on the lessons learned, which are of general interest for similar use cases in muon radiography.
△ Less
Submitted 7 February, 2022;
originally announced February 2022.
-
BLEMAB European project: muon imaging technique applied to blast furnaces
Authors:
BLEMAB Collaboration,
L. Bonechi,
F. Ambrosino,
P. Andreetto,
G. Bonomi,
D. Borselli,
S. Bottai,
T. Buhles,
I. Calliari,
P. Checchia,
U. Chiarotti,
C. Cialdai,
R. Ciaranfi,
L. Cimmino,
V. Ciulli,
R. D'Alessandro,
M. D'Errico,
R. Ferretti,
F. Finke,
A. Franzen,
B. Glaser,
S. Gonzi,
Y. Liu,
A. Lorenzon,
V. Masone
, et al. (8 additional authors not shown)
Abstract:
The BLEMAB European project (BLast furnace stack density Estimation through online Muon ABsorption measurements), evolution of the previous MuBlast European project, is designed to investigate in detail the capability of muon radiography techniques applied to the imaging of a blast furnace's inner zone. In particular, the geometry and size of the so called cohesive zone, i.e. the spatial zone wher…
▽ More
The BLEMAB European project (BLast furnace stack density Estimation through online Muon ABsorption measurements), evolution of the previous MuBlast European project, is designed to investigate in detail the capability of muon radiography techniques applied to the imaging of a blast furnace's inner zone. In particular, the geometry and size of the so called cohesive zone, i.e. the spatial zone where the slowly downward moving material begins to soften and melt, that plays an important role in the performance of the blast furnace itself. Thanks to the high penetration power of the natural cosmic ray muon radiation, muon transmission radiography represents an appropriate non-invasive methodology for imaging large high-density structures such as blast furnaces, whose linear size can be up to a few tens of meters. A state-of-the-art muon tracking system, whose design profits from the long experience of our collaboration in this field, is currently under development and will be installed in 2022 at a blast furnace on the ArcelorMittal site in Bremen (Germany) for many months. Collected data will be exploited to monitor temporal variations of the average density distribution inside the furnace. Muon radiography results will also be compared with measurements obtained through an enhanced multipoint probe and standard blast furnace models.
△ Less
Submitted 19 January, 2022; v1 submitted 19 October, 2021;
originally announced October 2021.
-
The CaloCube calorimeter for high-energy cosmic-ray measurements in space: performance of a large-scale prototype
Authors:
O. Adriani,
A. Agnesi,
S. Albergo,
M. Antonelli,
L. Auditore,
A. Basti,
E. Berti,
G. Bigongiari,
L. Bonechi,
M. Bongi,
V. Bonvicini,
S. Bottai,
P. Brogi,
G. Castellini,
P. W. Cattaneo,
C. Checchia,
R. D Alessandro,
S. Detti,
M. Fasoli,
N. Finetti,
A. Italiano,
P. Maestro,
P. S. Marrocchesi,
N. Mori,
G. Orzan
, et al. (23 additional authors not shown)
Abstract:
The direct observation of high-energy cosmic rays, up to the PeV energy region, will increasingly rely on highly performing calorimeters, and the physics performance will be primarily determined by their geometrical acceptance and energy resolution. Thus, it is extremely important to optimize their geometrical design, granularity and absorption depth, with respect to the totalmass of the apparatus…
▽ More
The direct observation of high-energy cosmic rays, up to the PeV energy region, will increasingly rely on highly performing calorimeters, and the physics performance will be primarily determined by their geometrical acceptance and energy resolution. Thus, it is extremely important to optimize their geometrical design, granularity and absorption depth, with respect to the totalmass of the apparatus, which is amongst the most important constraints for a space mission. CaloCube is an homogeneous calorimeter whose basic geometry is cubic and isotropic, obtained by filling the cubic volume with small cubic scintillating crystals. In this way it is possible to detect particles arriving from every direction in space, thus maximizing the acceptance. This design summarizes a three-year R&D activity, aiming to both optimize and study the full-scale performance of the calorimeter, in the perspective of a cosmic-ray space mission, and investigate a viable technical design by means of the construction of several sizable prototypes. A large scale prototype, made of a mesh of 5x5x18 CsI(Tl) crystals, has been constructed and tested on high-energy particle beams at CERN SPS accelerator. In this paper we describe the CaloCube design and present the results relative to the response of the large scale prototype to electrons.
△ Less
Submitted 4 October, 2021;
originally announced October 2021.
-
End-to-end simulations of the MUon RAdiography of VESuvius experiment
Authors:
A. Samalan,
S. Basnet,
L. Bonechi,
L. Cimmino,
R. D. Alessandro,
M. D. Errico,
A. Giammanco,
R. Karnam,
G. Macedonio,
M. Moussawi,
C. Rendon,
G. Saracino,
M. Tytgat
Abstract:
The MUon RAdiography of VESuvius (MURAVES) project aims at the study of the summital cone of Mt. Vesuvius, an active volcano near Naples (Italy), by measuring its density profile through muon flux attenuation. Its data, combined with those from gravimetric and seismic measurement campaigns, will be used for better defining the volcanic plug at the bottom of the crater. We report on the development…
▽ More
The MUon RAdiography of VESuvius (MURAVES) project aims at the study of the summital cone of Mt. Vesuvius, an active volcano near Naples (Italy), by measuring its density profile through muon flux attenuation. Its data, combined with those from gravimetric and seismic measurement campaigns, will be used for better defining the volcanic plug at the bottom of the crater. We report on the development of an end-to-end simulation framework, in order to perform accurate investigations of the effects of the experimental constraints and to compare simulations, under various model hypotheses, with the actual observations. The detector simulation setup is developed using GEANT4 and a study of cosmic particle generators has been conducted to identify the most suitable one for our simulation framework. To mimic the real data, GEANT4 raw hits are converted to clusters through a simulated digitization: energy deposits are first summed per scintillator bar, and then converted to number of photoelectrons with a data-driven procedure. This is followed by the same clustering algorithm and same tracking code as in real data. We also report on the study of muon transport through rock using PUMAS and GEANT4. In this paper we elaborate on the rationale for our technical choices, including trade-off between speed and accuracy. The developments reported here are of general interest in muon radiography and can be applied in similar cases.
△ Less
Submitted 17 November, 2021; v1 submitted 29 September, 2021;
originally announced September 2021.
-
Performance of RHICf detector during operation in 2017
Authors:
O. Adriani,
E. Berti,
L. Bonechi,
R. D' Alessandro,
Y. Goto,
B. Hong,
Y. Itow,
K. Kasahara,
M. H. Kim,
H. Menjo,
I. Nakagawa,
T. Sako,
N. Sakurai,
K. Sato,
R. Seidl,
K. Tanida,
S. Torii,
A. Tricomi
Abstract:
In the RHIC forward (RHICf) experiment, an operation with pp collisions was performed at $\sqrt{s}\,=\,$510 GeV from 24-27 June 2017. The performances, energy and position resolutions, trigger efficiency, stability, and background during the operation, have been studied using data and simulations, which revealed that the requirements for production cross-section and transverse single-spin asymmetr…
▽ More
In the RHIC forward (RHICf) experiment, an operation with pp collisions was performed at $\sqrt{s}\,=\,$510 GeV from 24-27 June 2017. The performances, energy and position resolutions, trigger efficiency, stability, and background during the operation, have been studied using data and simulations, which revealed that the requirements for production cross-section and transverse single-spin asymmetry measurements of very forward photons, $π^0$s, and neutrons were satisfied. In this paper, we describe the details of these studies.
△ Less
Submitted 2 August, 2021;
originally announced August 2021.
-
Tracker-In-Calorimeter (TIC): a calorimetric approach to tracking gamma rays in space experiments
Authors:
O. Adriani,
G. Ambrosi,
P. Azzarello,
A. Basti,
E. Berti,
B. Bertucci,
G. Bigongiari,
L. Bonechi,
M. Bongi,
S. Bottai,
M. Brianzi,
P. Brogi,
G. Castellini,
E. Catanzani,
C. Checchia,
R. D'Alessandro,
S. Detti,
M. Duranti,
N. Finetti,
V. Formato,
M. Ionica,
P. Maestro,
F. Maletta,
P. S. Marrocchesi,
N. Mori
, et al. (11 additional authors not shown)
Abstract:
A multi-messenger, space-based cosmic ray detector for gamma rays and charged particles poses several design challenges due to the different instrumental requirements for the two kind of particles. Gamma-ray detection requires layers of high Z materials for photon conversion and a tracking device with a long lever arm to achieve the necessary angular resolution to separate point sources; on the co…
▽ More
A multi-messenger, space-based cosmic ray detector for gamma rays and charged particles poses several design challenges due to the different instrumental requirements for the two kind of particles. Gamma-ray detection requires layers of high Z materials for photon conversion and a tracking device with a long lever arm to achieve the necessary angular resolution to separate point sources; on the contrary, charge measurements for atomic nuclei requires a thin detector in order to avoid unwanted fragmentation, and a shallow instrument so to maximize the geometric factor. In this paper, a novel tracking approach for gamma rays which tries to reconcile these two conflicting requirements is presented. The proposal is based on the Tracker-In-Calorimeter (TIC) design that relies on a highly-segmented calorimeter to track the incident gamma ray by sampling the lateral development of the electromagnetic shower at different depths. The effectiveness of this approach has been studied with Monte Carlo simulations and has been validated with test beam data of a detector prototype.
△ Less
Submitted 22 October, 2020; v1 submitted 4 August, 2020;
originally announced August 2020.
-
Atmospheric muons as an imaging tool
Authors:
Lorenzo Bonechi,
Raffaello D'Alessandro,
Andrea Giammanco
Abstract:
Imaging methods based on the absorption or scattering of atmospheric muons, collectively named under the neologism "muography", exploit the abundant natural flux of muons produced from cosmic-ray interactions in the atmosphere. Recent years have seen a steep rise in the development of muography methods in a variety of innovative multidisciplinary approaches to study the interior of natural or man-…
▽ More
Imaging methods based on the absorption or scattering of atmospheric muons, collectively named under the neologism "muography", exploit the abundant natural flux of muons produced from cosmic-ray interactions in the atmosphere. Recent years have seen a steep rise in the development of muography methods in a variety of innovative multidisciplinary approaches to study the interior of natural or man-made structures, establishing synergies between usually disconnected academic disciplines such as particle physics, geology, and archaeology. Muography also bears promise of immediate societal impact through geotechnical investigations, nuclear waste surveys, homeland security, and natural hazard monitoring. Our aim is to provide an introduction to this vibrant research area, starting from the physical principles at the basis of the methods and reviewing several recent developments in the application of muography methods to specific use cases, without any pretence of exhaustiveness. We then describe the main detector technologies and imaging methods, including their combination with conventional techniques from other disciplines, where appropriate. Finally, we discuss critically some outstanding issues that affect a broad variety of applications, and the current state of the art in addressing them.
△ Less
Submitted 10 June, 2019;
originally announced June 2019.
-
The MIMA project. Design, construction and performances of a compact hodoscope for muon radiography applications in the context of Archaeology and geophysical prospections
Authors:
Guglielmo Baccani,
Lorenzo Bonechi,
Roberto Ciaranfi,
Luigi Cimmino,
Vitaliano Ciulli,
Raffaello D'Alessandro,
Barbara Melon,
Pasquale Noli,
Giulio Saracino,
Lorenzo Viliani
Abstract:
The Muon Imaging for Mining and Archaeology (MIMA) project aims at the development of a non-invasive technique for imaging dense structures or cavities, hidden in the underground or anyway surrounded by huge volumes of matter, based on Muon Absorption Radiography. Given its natural multidisciplinary, the final purpose is the validation of this methodology for applications in different fields, like…
▽ More
The Muon Imaging for Mining and Archaeology (MIMA) project aims at the development of a non-invasive technique for imaging dense structures or cavities, hidden in the underground or anyway surrounded by huge volumes of matter, based on Muon Absorption Radiography. Given its natural multidisciplinary, the final purpose is the validation of this methodology for applications in different fields, like Archaeology, Geology, mining, Civil Engineering and Civil Protection, in close cooperation with team in these fields. In this paper we report on the design, construction and performance of a compact and lightweight muon telescope designed mainly for archaeological investigation and geophysical prospections in general. The MIMA detector is also used currently as a test instrument to study different hardware solutions to optimize the global performance in these types of applications.
△ Less
Submitted 16 October, 2018; v1 submitted 29 June, 2018;
originally announced June 2018.
-
CaloCube: a novel calorimeter for high-energy cosmic rays in space
Authors:
P. W. Cattaneo,
O. Adriani,
S. Albergo,
L. Auditore,
A. Basti,
E. Berti,
G. Bigongiari,
L. Bonechi,
S. Bonechi,
M. Bongi,
V. Bonvicini,
S. Bottai,
P. Brogi,
G. Carotenuto,
G. Castellini,
R. ďAlessandro,
S. Detti,
M. Fasoli,
N. Finetti,
A. Italiano,
P. Lenzi,
P. Maestro,
P. S. Marrocchesi,
N. Mori,
M. Olmi
, et al. (21 additional authors not shown)
Abstract:
In order to extend the direct observation of high-energy cosmic rays up to the PeV region, highly performing calorimeters with large geometrical acceptance and high energy resolution are required. Within the constraint of the total mass of the apparatus, crucial for a space mission, the calorimeters must be optimized with respect to their geometrical acceptance, granularity and absorption depth. C…
▽ More
In order to extend the direct observation of high-energy cosmic rays up to the PeV region, highly performing calorimeters with large geometrical acceptance and high energy resolution are required. Within the constraint of the total mass of the apparatus, crucial for a space mission, the calorimeters must be optimized with respect to their geometrical acceptance, granularity and absorption depth. CaloCube is a homogeneous calorimeter with cubic geometry, to maximise the acceptance being sensitive to particles from every direction in space; granularity is obtained by relying on small cubic scintillating crystals as active elements. Different scintillating materials have been studied. The crystal sizes and spacing among them have been optimized with respect to the energy resolution. A prototype, based on CsI(Tl) cubic crystals, has been constructed and tested with particle beams. Some results of tests with different beams at CERN are presented.
△ Less
Submitted 23 May, 2017; v1 submitted 19 May, 2017;
originally announced May 2017.
-
Assessing the Feasibility of Interrogating Nuclear Waste Storage Silos using Cosmic-ray Muons
Authors:
F. Ambrosino,
L. Bonechi,
L. Cimmino,
R. D'Alessandro,
D. G. Ireland,
R. Kaiser,
D. F. Mahon,
N. Mori,
P. Noli,
G. Saracino,
C. Shearer,
L. Viliani,
G. Yang
Abstract:
Muon radiography is a fast growing field in applied scientific research. In recent years, many detector technologies and imaging techniques using the Coulomb scattering and absorption properties of cosmic-ray muons have been developed for the non-destructive assay of various structures across a wide range of applications. This work presents the first results that assess the feasibility of using mu…
▽ More
Muon radiography is a fast growing field in applied scientific research. In recent years, many detector technologies and imaging techniques using the Coulomb scattering and absorption properties of cosmic-ray muons have been developed for the non-destructive assay of various structures across a wide range of applications. This work presents the first results that assess the feasibility of using muons to interrogate waste silos within the UK Nuclear Industry. Two such approaches, using different techniques that exploit each of these properties, have previously been published, and show promising results from both simulation and experimental data for the detection of shielded high-Z materials and density variations from volcanic assay. Both detector systems are based on scintillator and photomultiplier technologies. Results from dedicated simulation studies using both these technologies and image reconstruction techniques are presented for an intermediate-sized nuclear waste storage facility filled with concrete and an array of uranium samples. Both results highlight the potential to identify uranium objects of varying thicknesses greater than 5cm within real-time durations of several weeks. Increased contributions from Coulomb scattering within the concrete of the structure hinder the ability of both approaches to resolve objects of 2cm dimensions even with increased statistics. These results are all dependent on both the position of the objects within the facility and the locations of the detectors. Results for differing thicknesses of concrete, which reflect the unknown composition of the structures under interrogation, are also presented alongside studies performed for a series of data collection durations. It is anticipated that with further research, muon radiography in one, or both of these forms, will play a key role in future industrial applications within the UK Nuclear Industry.
△ Less
Submitted 10 November, 2014;
originally announced November 2014.
-
Proposal; Precise measurements of very forward particle production at RHIC
Authors:
Y. Itow,
H. Menjo,
T. Sako,
N. Sakurai,
K. Kasahara,
T. Suzuki,
S. Torii,
O. Adriani,
L. Bonechi,
R. D'Alessandro,
G. Mitsuka,
A. Tricomi,
Y. Goto,
K. Tanida
Abstract:
We propose a new experiment Relativistic Heavy Ion Collider forward (RHICf) for the precise measurements of very forward particle production at RHIC. The proposal is to install the LHCf Arm2 detector in the North side of the ZDC installation slot at the PHENIX interaction point. By installing high-resolution electromagnetic calorimeters at this location we can measure the spectra of photons, neutr…
▽ More
We propose a new experiment Relativistic Heavy Ion Collider forward (RHICf) for the precise measurements of very forward particle production at RHIC. The proposal is to install the LHCf Arm2 detector in the North side of the ZDC installation slot at the PHENIX interaction point. By installing high-resolution electromagnetic calorimeters at this location we can measure the spectra of photons, neutrons and pi0 at pseudorapidity eta>6.
△ Less
Submitted 16 September, 2014;
originally announced September 2014.
-
The performance of the LHCf detector for hadronic showers
Authors:
K. Kawade,
O. Adriani,
L. Bonechi,
M. Bongi,
G. Castellini,
R. DAlessandro,
M. Del Prete,
M. Haguenauer,
Y. Itow,
K. Kasahara,
Y. Makino,
K. Masuda,
E. Matsubayashi,
H. Menjo,
G. Mitsuka,
Y. Muraki,
P. Papini,
A-L. Perrot,
S. Ricciarini,
T. Sako,
N. Sakurai,
Y. Shimizu,
T. Suzuki,
T. Tamura,
S. Torii
, et al. (2 additional authors not shown)
Abstract:
The Large Hadron Collider forward (LHCf) experiment has been designed to use the LHC to benchmark the hadronic interaction models used in cosmic-ray physics. The LHCf experiment measures neutral particles emitted in the very forward region of LHC collisions. In this paper, the performances of the LHCf detectors for hadronic showers was studied with MC simulations and beam tests. The detection effi…
▽ More
The Large Hadron Collider forward (LHCf) experiment has been designed to use the LHC to benchmark the hadronic interaction models used in cosmic-ray physics. The LHCf experiment measures neutral particles emitted in the very forward region of LHC collisions. In this paper, the performances of the LHCf detectors for hadronic showers was studied with MC simulations and beam tests. The detection efficiency for neutrons is from 60% to 70% above 500 GeV. The energy resolutions are about 40% and the position resolution is 0.1 to 1.3mm depend on the incident energy for neutrons. The energy scale determined by the MC simulations and the validity of the MC simulations were examined using 350 GeV proton beams at the CERN-SPS.
△ Less
Submitted 20 December, 2013;
originally announced December 2013.
-
NEUCAL, an innovative neutron detector for e/h discrimination: testbeam results
Authors:
G. Sguazzoni,
O. Adriani,
L. Bonechi,
M. Bongi,
S. Bottai,
M. Calamai,
G. Castellini,
R. D'Alessandro,
M. Grandi,
P. Papini,
S. Ricciarini,
P. Sona,
G. Sorichetti
Abstract:
An excellent hadron to electron discrimination is a crucial aspect of calorimeter-based experiments in astroparticle physics. Standard discrimination techniques require full shower development and fine granularity but in space detectors severe limitations exist due to constraints on dimensions, weight and power consumption. A possible approach is to exploit the different neutron yield of electroma…
▽ More
An excellent hadron to electron discrimination is a crucial aspect of calorimeter-based experiments in astroparticle physics. Standard discrimination techniques require full shower development and fine granularity but in space detectors severe limitations exist due to constraints on dimensions, weight and power consumption. A possible approach is to exploit the different neutron yield of electromagnetic and hadronic showers. NEUCAL is a light and compact innovative neutron detector, to be used as an auxiliary complement of electromagnetic calorimeters. This new approach to neutron counting relies on scintillation detectors which are sensitive to the moderation phase of the neutron component. The NEUCAL prototype has been placed after a conventional calorimeter and tested with high energy beams of pions and positrons. The comparison of experimental data with a detailed Geant4 simulation and the encouraging results obtained are presented.
△ Less
Submitted 13 August, 2010;
originally announced August 2010.
-
NEUCAL: a prototype detector for electron/hadron discrimination through neutron measurement
Authors:
L. Bonechi,
O. Adriani,
R. D'Alessandro,
P. Sona,
G. Sorichetti,
P. Spillantini,
S. Bottai,
M. Grandi,
P. Papini,
S. Ricciarini,
G. Sguazzoni,
E. Vannuccini,
A. Viciani,
G. Castellini
Abstract:
NEUCAL is a neutron detector which is currently under study to be used as a sub-detector complementing electromagnetic (e.m.) calorimeters for electron/hadron discrimination in cosmic rays at high energy. Its aim is to reveal the different yield of neutron production in e.m. and hadronic showers, not only by counting signals due to their absorption in some sensible detector after passive moderatio…
▽ More
NEUCAL is a neutron detector which is currently under study to be used as a sub-detector complementing electromagnetic (e.m.) calorimeters for electron/hadron discrimination in cosmic rays at high energy. Its aim is to reveal the different yield of neutron production in e.m. and hadronic showers, not only by counting signals due to their absorption in some sensible detector after passive moderation, but also looking for signals produced during the moderation phase. The basic idea and a test of a prototype detector are discussed in this paper. A first preliminary comparison of experimental data with simulation is also shown.
△ Less
Submitted 11 August, 2010;
originally announced August 2010.
