Showing 1–17 of 17 results for author: Boller, K -

Hybrid integrated near UV lasers using the deep-UV Al2O3 platform

Authors: C. A. A. Franken, W. A. P. M. Hendriks, L. V. Winkler, M. Dijkstra, A. R. do Nascimento Jr, A. van Rees, M. R. S. Mardani, R. Dekker, J. van Kerkhof, P. J. M. van der Slot, S. M. García-Blanco, K. -J. Boller

Abstract: Hybrid integrated diode lasers have so far been realized using silicon, polymer, and silicon nitride (Si3N4) waveguide platforms for extending on-chip tunable light engines from the infrared throughout the visible range. Here we demonstrate the first hybrid integrated laser using the aluminum oxide (Al2O3) deep-UV capable waveguide platform. By permanently coupling low-loss Al2O3 frequency-tunable… ▽ More Hybrid integrated diode lasers have so far been realized using silicon, polymer, and silicon nitride (Si3N4) waveguide platforms for extending on-chip tunable light engines from the infrared throughout the visible range. Here we demonstrate the first hybrid integrated laser using the aluminum oxide (Al2O3) deep-UV capable waveguide platform. By permanently coupling low-loss Al2O3 frequency-tunable Vernier feedback circuits with GaN double-pass amplifiers in a hermetically sealed housing, we demonstrate the first extended cavity diode laser (ECDL) in the near UV. The laser shows a maximum fiber-coupled output power of 0.74 mW, corresponding to about 3.5 mW on chip, and tunes more than 4.4 nm in wavelength from 408.1 nm to 403.7 nm. Integrating stable, single-mode and tunable lasers into a deep-UV platform opens a new path for chip-integrated photonic applications. △ Less

Submitted 22 February, 2023; originally announced February 2023.

Comments: 14 pages, 3 figures

Integrated frequency comb laser with narrow intrinsic optical linewidth based on a dielectric waveguide feedback circuit

Authors: Jesse Mak, Albert van Rees, Youwen Fan, Edwin J. Klein, Dimitri Geskus, Peter J. M. van der Slot, Klaus. -J. Boller

Abstract: We present an integrated hybrid semiconductor-dielectric (InP-Si$_3$N$_4$) waveguide laser that generates frequency combs at a wavelength around 1.5 $μ$m with a record-low intrinsic optical linewidth of 34 kHz. This is achieved by extending the cavity photon lifetime using a low-loss dielectric waveguide circuit. In our experimental demonstration, the on-chip, effective optical path length of the… ▽ More We present an integrated hybrid semiconductor-dielectric (InP-Si$_3$N$_4$) waveguide laser that generates frequency combs at a wavelength around 1.5 $μ$m with a record-low intrinsic optical linewidth of 34 kHz. This is achieved by extending the cavity photon lifetime using a low-loss dielectric waveguide circuit. In our experimental demonstration, the on-chip, effective optical path length of the laser cavity is extended to 6 cm. The resulting linewidth narrowing shows the high potential of on-chip, highly coherent frequency combs with direct electrical pum**, based on hybrid and heterogeneous integrated circuits making use of low-loss dielectric waveguides. △ Less

Submitted 18 February, 2019; originally announced February 2019.

Journal ref: Optics Express, Vol. 27, Issue 9, pp. 13307-13318 (2019)

Cluster size dependence of high-order harmonic generation

Authors: Y. Tao, R. Hagmeijers, H. M. J. Bastiaens, S. J. Goh, P. J. M. van der Slot, S. G. Biedron, S. V. Milton, K. -J. Boller

Abstract: We investigate high-order harmonic generation (HHG) from noble gas clusters in a supersonic gas jet. To identify the contribution of harmonic generation from clusters versus that from gas monomers, we measure the high-order harmonic output over a broad range of the total atomic number density in the jet (from 3*10^16 cm^{-3} to 3x10^18 cm{-3}) at two different reservoir temperatures (303 K and 363… ▽ More We investigate high-order harmonic generation (HHG) from noble gas clusters in a supersonic gas jet. To identify the contribution of harmonic generation from clusters versus that from gas monomers, we measure the high-order harmonic output over a broad range of the total atomic number density in the jet (from 3*10^16 cm^{-3} to 3x10^18 cm{-3}) at two different reservoir temperatures (303 K and 363 K). For the firrst time in the evaluation of the harmonic yield in such measurements, the variation of the liquid mass fraction, g, versus pressure and temperature is taken into consideration, which we determine, reliably and consistently, to be below 20% within our range of experimental parameters. By comparing the measured harmonic yield from a thin jet with the calculated corresponding yield from monomers alone, we find an increased emission of the harmonics when the average cluster size is less than 3000. Using g, under the assumption that the emission from monomers and clusters add up coherently, we calculate the ratio of the average single-atom response of an atom within a cluster to that of a monomer and find an enhancement of around 10 for very small average cluster size (~200). We do not find any dependence of the cut-off frequency on the composition of the cluster jet. This implies that HHG in clusters is based on electrons that return to their parent ions and not to neighbouring ions in the cluster. To fully employ the enhanced average single-atom response found for small average cluster sizes (~200), the nozzle producing the cluster jet must provide a large liquid mass fraction at these small cluster sizes for increasing the harmonic yield. Moreover, cluster jets may allow for quasi-phase matching, as the higher mass of clusters allows for a higher density contrast in spatially structuring the nonlinear medium. △ Less

Submitted 2 May, 2017; v1 submitted 29 November, 2016; originally announced November 2016.

Comments: 16 pages, 6 figures

Programmable two-photon quantum interference in $10^3$ channels in opaque scattering media

Authors: Tom A. W. Wolterink, Ravitej Uppu, Georgios Ctistis, Willem L. Vos, Klaus -J. Boller, Pepijn W. H. Pinkse

Abstract: We investigate two-photon quantum interference in an opaque scattering medium that intrinsically supports $10^6$ transmission channels. By adaptive spatial phase-modulation of the incident wavefronts, the photons are directed at targeted speckle spots or output channels. From $10^3$ experimentally available coupled channels, we select two channels and enhance their transmission, to realize the equ… ▽ More We investigate two-photon quantum interference in an opaque scattering medium that intrinsically supports $10^6$ transmission channels. By adaptive spatial phase-modulation of the incident wavefronts, the photons are directed at targeted speckle spots or output channels. From $10^3$ experimentally available coupled channels, we select two channels and enhance their transmission, to realize the equivalent of a fully programmable $2\times2$ beam splitter. By sending pairs of single photons from a parametric down-conversion source through the opaque scattering medium, we observe two-photon quantum interference. The programmed beam splitter need not fulfill energy conservation over the two selected output channels and hence could be non-unitary. Consequently, we have the freedom to tune the quantum interference from bunching (Hong-Ou-Mandel-like) to antibunching. Our results establish opaque scattering media as a platform for high-dimensional quantum interference that is notably relevant for boson sampling and physical-key-based authentication. △ Less

Submitted 3 November, 2015; originally announced November 2015.

Journal ref: Phys. Rev. A 93, 053817 (2016)

Ultrafast, low-power, all-optical switching via birefringent phase-matched transverse mode conversion in integrated waveguides

Authors: Tim Hellwig, Jörn P. Ep**, Martin Schnack, Klaus. -J. Boller, Carsten Fallnich

Abstract: We demonstrate the potential of birefringence-based, all-optical, ultrafast conversion between the transverse modes in integrated optical waveguides by modelling the conversion process by numerically solving the multi-mode coupled nonlinear Schroedinger equations. The observed conversion is induced by a control beam and due to the Kerr effect, resulting in a transient index grating which coherentl… ▽ More We demonstrate the potential of birefringence-based, all-optical, ultrafast conversion between the transverse modes in integrated optical waveguides by modelling the conversion process by numerically solving the multi-mode coupled nonlinear Schroedinger equations. The observed conversion is induced by a control beam and due to the Kerr effect, resulting in a transient index grating which coherently scatters probe light from one transverse waveguide mode into another. We introduce birefringent phase matching to enable efficient all-optically induced mode conversion at different wavelengths of the control and probe beam. It is shown that tailoring the waveguide geometry can be exploited to explicitly minimize intermodal group delay as well as to maximize the nonlinear coefficient, under the constraint of a phase matching condition. The waveguide geometries investigated here, allow for mode conversion with over two orders of magnitude reduced control pulse energy compared to previous schemes and thereby promise nonlinear mode switching exceeding efficiencies of 90% at switching energies below 1 nJ. △ Less

Submitted 17 July, 2015; originally announced July 2015.

Journal ref: Optics Express, Vol. 23, Issue 15, pp. 19189-19201 (2015)

Single-shot fluctuations in waveguided high-harmonic generation

Authors: S. J. Goh, Y. Tao, P. J. M. van der Slot, H. J. M. Bastiaens, J. Herek, S. G. Biedron, M. B. Danailov, S. V. Milton, K. -J. Boller

Abstract: For exploring the application potential of coherent soft x-ray (SXR) and extreme ultraviolet radiation (XUV) provided by high-harmonic generation, it is important to characterize the central output parameters. Of specific importance are pulse-to-pulse (shot-to-shot) fluctuations of the high-harmonic output energy, fluctuations of the direction of the emission (pointing instabilities), and fluctuat… ▽ More For exploring the application potential of coherent soft x-ray (SXR) and extreme ultraviolet radiation (XUV) provided by high-harmonic generation, it is important to characterize the central output parameters. Of specific importance are pulse-to-pulse (shot-to-shot) fluctuations of the high-harmonic output energy, fluctuations of the direction of the emission (pointing instabilities), and fluctuations of the beam divergence and shape that reduce the spatial coherence. We present the first single-shot measurements of waveguided high-harmonic generation in a waveguided (capillary-based) geometry. Using a capillary waveguide filled with Argon gas as the nonlinear medium, we provide the first characterization of shot-to-shot fluctuations of the pulse energy, of the divergence and of the beam pointing. We record the strength of these fluctuations vs. two basic input parameters, which are the drive laser pulse energy and the gas pressure in the capillary waveguide. In correlation measurements between single-shot drive laser beam profiles and single-shot high-harmonic beam profiles we prove the absence of drive laser beam-pointing-induced fluctuations in the high-harmonic output. We attribute the main source of high-harmonic fluctuations to ionization-induced nonlinear mode mixing during propagation of the drive laser pulse inside the capillary waveguide. △ Less

Submitted 15 July, 2015; originally announced July 2015.

Programmable photonic signal processor chip for radiofrequency applications

Authors: Leimeng Zhuang, Chris G. H. Roeloffzen, Marcel Hoekman, Klaus -J. Boller, Arthur J. Lowery

Abstract: For the abstract, please see the submitted article. For the abstract, please see the submitted article. △ Less

Submitted 1 May, 2015; originally announced May 2015.

High precision wavelength estimation method for integrated optics

Authors: R. M. Oldenbeuving, H. Song, G. Schitter, M. Verhaegen, E. J. Klein, C. J. Lee, H. L. Offerhaus, K. -J. Boller

Abstract: A novel and simple approach to optical wavelength measurement is presented in this paper. The working principle is demonstrated using a tunable waveguide micro ring resonator and single photodiode. The initial calibration is done with a set of known wavelengths and resonator tunings. The combined spectral sensitivity function of the resonator and photodiode at each tuning voltage was modeled by a… ▽ More A novel and simple approach to optical wavelength measurement is presented in this paper. The working principle is demonstrated using a tunable waveguide micro ring resonator and single photodiode. The initial calibration is done with a set of known wavelengths and resonator tunings. The combined spectral sensitivity function of the resonator and photodiode at each tuning voltage was modeled by a neural network. For determining the unknown wavelengths, the resonator was tuned with a set of heating voltages and the corresponding photodiode signals are collected. The unknown wavelength was estimated, based on the collected photodiode signals, the calibrated neural networks, and an optimization algorithm. The wavelength estimate method provides a high spectral precision of about 8 pm (5*10^(-6) at 1550 nm) in the wavelength range between 1549 nm to 1553 nm. A higher precision of 5 pm (3*10^(-6)) is achieved in the range between 1550.3 nm to 1550.8 nm, which is a factor of five improved compared to a simple lookup of data. The importance of our approach is that it strongly simplifies the optical system and enables optical integration. The approach is also of general importance, because it may be applicable to all wavelength monitoring devices which show an adjustable wavelength response. △ Less

Submitted 10 June, 2013; v1 submitted 22 April, 2013; originally announced April 2013.

Comments: 11 pages, 10 figures

Map** individual electromagnetic field components inside a photonic crystal

Authors: T. Denis, B. Reijnders, J. H. H. Lee, P. J. M. van der Slot, W. L. Vos, K. -J. Boller

Abstract: We present a method to map the absolute electromagnetic field strength inside photonic crystals. We apply the method to map the electric field component Ez of a two-dimensional photonic crystal slab at microwave frequencies. The slab is placed between two mirrors to select Bloch standing waves and a subwavelength spherical scatterer is scanned inside the resulting resonator. The resonant Bloch fre… ▽ More We present a method to map the absolute electromagnetic field strength inside photonic crystals. We apply the method to map the electric field component Ez of a two-dimensional photonic crystal slab at microwave frequencies. The slab is placed between two mirrors to select Bloch standing waves and a subwavelength spherical scatterer is scanned inside the resulting resonator. The resonant Bloch frequencies shift depending on the electric field at the position of the scatterer. To map the electric field component Ez we measure the frequency shift in the reflection and transmission spectrum of the slab versus the scatterer position. Very good agreement is found between measurements and calculations without any adjustable parameters. △ Less

Submitted 9 July, 2012; originally announced July 2012.

Comments: 12 pages, 7 figures

Journal ref: Optics Express, Vol. 20, Issue 20, pp. 22902-22913 (2012)

25 kHz narrow spectral bandwidth of a wavelength tunable diode laser with a short waveguide-based external cavity

Authors: R. M. Oldenbeuving, E. J. Klein, H. L. Offerhaus, C. J. Lee, H. Song, K. -J. Boller

Abstract: We report on the spectral properties of a diode laser with a tunable external cavity in integrated optics. Even though the external cavity is short compared to other small-bandwidth external cavity lasers, the spectral bandwidth of this tunable laser is as small as 25 kHz (FWHM), at a side-mode suppression ratio (SMSR) of 50 dB. Our laser is also able to access preset wavelengths in as little as 2… ▽ More We report on the spectral properties of a diode laser with a tunable external cavity in integrated optics. Even though the external cavity is short compared to other small-bandwidth external cavity lasers, the spectral bandwidth of this tunable laser is as small as 25 kHz (FWHM), at a side-mode suppression ratio (SMSR) of 50 dB. Our laser is also able to access preset wavelengths in as little as 200 us and able to tune over the full telecom C-band (1530 nm - 1565 nm). △ Less

Submitted 2 April, 2012; originally announced April 2012.

Comments: 8 pages, 7 figures

Modeling of mode-locking in a laser with spatially separate gain media

Authors: R. M. Oldenbeuving, C. J. Lee, P. D. van Voorst, H. L. Offerhaus, K. -J. Boller

Abstract: We present a novel laser mode-locking scheme and discuss its unusual properties and feasibility using a theoretical model. A large set of single-frequency continuous-wave lasers oscillate by amplification in spatially separated gain media. They are mutually phase-locked by nonlinear feedback from a common saturable absorber. As a result, ultra short pulses are generated. The new scheme offers thre… ▽ More We present a novel laser mode-locking scheme and discuss its unusual properties and feasibility using a theoretical model. A large set of single-frequency continuous-wave lasers oscillate by amplification in spatially separated gain media. They are mutually phase-locked by nonlinear feedback from a common saturable absorber. As a result, ultra short pulses are generated. The new scheme offers three significant benefits: the light that is amplified in each medium is continuous wave, thereby avoiding issues related to group velocity dispersion and nonlinear effects that can perturb the pulse shape. The set of frequencies on which the laser oscillates, and therefore the pulse repetition rate, is controlled by the geometry of resonator-internal optical elements, not by the cavity length. Finally, the bandwidth of the laser can be controlled by switching gain modules on and off. This scheme offers a route to mode-locked lasers with high average output power, repetition rates that can be scaled into the THz range, and a bandwidth that can be dynamically controlled. The approach is particularly suited for implementation using semiconductor diode laser arrays. △ Less

Submitted 1 October, 2010; v1 submitted 27 August, 2010; originally announced August 2010.

Comments: 13 pages, 5 figures, submitted to Optics Express

Generation of stable ultra-relativistic attosecond electron bunches via the laser wakefield acceleration mechanism

Authors: M. J. H. Luttikhof, A. G. Khachatryan, F. A. van Goor, K. -J. Boller

Abstract: In recent experiments ultra-relativistic femtosecond electron bunches were generated by a Laser Wakefield Accelerator (LWFA) in different regimes. Here we predict that even attosecond bunches can be generated by an LWFA due to the fast betatron phase mixing within a femtosecond electron bunch. The attosecond bunches are stable outside the LWFA and can propagate in vacuum many tens of centimeter… ▽ More In recent experiments ultra-relativistic femtosecond electron bunches were generated by a Laser Wakefield Accelerator (LWFA) in different regimes. Here we predict that even attosecond bunches can be generated by an LWFA due to the fast betatron phase mixing within a femtosecond electron bunch. The attosecond bunches are stable outside the LWFA and can propagate in vacuum many tens of centimeter without significant change in their duration. Our calculations show that evidence for the formation of attosecond bunches can be found in the spectrum of coherent betatron radiation from LWFA's. △ Less

Submitted 18 June, 2009; originally announced June 2009.

Electron bunch injection at an angle into a laser wakefield

Authors: M. J. H. Luttikhof, A. G. Khachatryan, F. A. van Goor, K. -J. Boller

Abstract: External injection of electron bunches longer than the plasma wavelength in a laser wakefield accelerator can lead to the generation of femtosecond ultrarelativistic bunches with a couple of percent energy spread. Extensive study has been done on external electron bunch (e.g. one generated by a photo-cathode rf linac) injection in a laser wakefield for different configurations. In this paper we… ▽ More External injection of electron bunches longer than the plasma wavelength in a laser wakefield accelerator can lead to the generation of femtosecond ultrarelativistic bunches with a couple of percent energy spread. Extensive study has been done on external electron bunch (e.g. one generated by a photo-cathode rf linac) injection in a laser wakefield for different configurations. In this paper we investigate a new way of external injection where the electron bunch is injected at a small angle into the wakefield. This way one can avoid the ponderomotive scattering as well as the vacuum-plasma transition region, which tend to destroy the injected bunch. In our simulations, the effect of the laser pulse dynamics is also taken into account. It is shown that injection at an angle can provide compressed and accelerated electron bunches with less than 2% energy spread. Another advantage of this scheme is that it has less stringent requirements in terms of the size of the injected bunch and there is the potential to trap more charge. △ Less

Submitted 14 November, 2008; v1 submitted 21 October, 2008; originally announced October 2008.

Journal ref: Laser Part. Beams 27, 69 (2009)

Electromagnetic radiation from a laser wakefield accelerator

Authors: A. G. Khachatryan, F. A. van Goor, K. -J. Boller

Abstract: Coherent and incoherent electromagnetic radiation emitted from a laser wakefield accelerator is calculated based on Lienard-Wiechert potentials. It is found that at wavelengths longer than the bunch length, the radiation is coherent. The coherent radiation, which typically lies in the infrared range, shows features that reveal details of the acceleration process and properties of the electron bu… ▽ More Coherent and incoherent electromagnetic radiation emitted from a laser wakefield accelerator is calculated based on Lienard-Wiechert potentials. It is found that at wavelengths longer than the bunch length, the radiation is coherent. The coherent radiation, which typically lies in the infrared range, shows features that reveal details of the acceleration process and properties of the electron bunch, such as its duration, charge, energy, and offset with respect to the wakefield axis. The incoherent range of the spectrum, which extends to the X-ray frequency range, consists of rather broad peaks, which are caused by the acceleration. △ Less

Submitted 7 May, 2008; originally announced May 2008.

Comments: 14 pages, incl. 6 figures, submitted for publication

Dynamics of Femtosecond Electron Bunches

Authors: A. G. Khachatryan, A. Irman, F. A. van Goor, K. -J. Boller

Abstract: In the laser wakefield accelerator (LWFA) a short intense laser pulse, with a duration of the order of a plasma wave period, excites an unusually strong plasma wake wave (laser wakefield). Recent experiments on laser wakefield acceleration [Nature (London) 431, p.535, p.538, p.541 (2004)] demonstrated generation of ultra-short (with a duration of a few femtoseconds) relativistic electron bunches… ▽ More In the laser wakefield accelerator (LWFA) a short intense laser pulse, with a duration of the order of a plasma wave period, excites an unusually strong plasma wake wave (laser wakefield). Recent experiments on laser wakefield acceleration [Nature (London) 431, p.535, p.538, p.541 (2004)] demonstrated generation of ultra-short (with a duration of a few femtoseconds) relativistic electron bunches with relatively low energy spread of the order of a few percent. We have studied the dynamics of such bunches in vacuum and in laser wakefield. The results show strong bunch dynamics already on a few millimeters propagation distance in both cases. In vacuum, the bunch radius and emittance quickly grow. The latter worsens the focusability of the bunch. We found that when a femtosecond bunch is accelerated in a channel-guided laser wakefield, for realistic bunch lengths, the bunch length is approximately conserved. However, the spread in betatron frequencies leads to fast betatron phase mixing in the bunch envelope for on-axis injection. When bunch is injected in a laser wakefield off-axis, the bunch decoherence results in considerable increase in the normalized bunch emittance, and, in some cases, in increase in the energy spread, after acceleration. We also discuss a possible two-stage laser wakefield accelerator. △ Less

Submitted 21 August, 2007; originally announced August 2007.

Comments: 34 pages, incl. 11 figs. and 1 table, submitted for publication

Using ultra-short pulses to determine particle size and density distributions

Authors: Chris J. Lee, Peter J. M. van der Slot, Klaus. -J. Boller

Abstract: We analyze the time dependent response of strongly scattering media (SSM) to ultra-short pulses of light. A random walk technique is used to model the optical scattering of ultra-short pulses of light propagating through media with random shapes and various packing densities. The pulse spreading was found to be strongly dependent on the average particle size, particle size distribution, and the… ▽ More We analyze the time dependent response of strongly scattering media (SSM) to ultra-short pulses of light. A random walk technique is used to model the optical scattering of ultra-short pulses of light propagating through media with random shapes and various packing densities. The pulse spreading was found to be strongly dependent on the average particle size, particle size distribution, and the packing fraction. We also show that the intensity as a function of time-delay can be used to analyze the particle size distribution and packing fraction of an optically thick sample independently of the presence of absorption features. Finally, we propose an all new way to measure the shape of ultra-short pulses that have propagated through a SSM. △ Less

Submitted 1 August, 2007; originally announced August 2007.

Comments: 15 pages, 29 figures, accepted for publication in Optics Express will update with full reference when it is available

Ponderomotive scattering of an electron-bunch before injection into a laser wakefield

Authors: A. G. Khachatryan, M. J. H. Luttikhof, F. A. van Goor, K. -J. Boller

Abstract: For the purpose of laser wakefield acceleration, it turned out that also the injection of electron bunches longer than a plasma wavelength can generate accelerated femtosecond bunches with relatively low energy spread. This is of high interest because such injecting bunches can be provided, e.g., by state-of-the-art photo cathode RF guns. Here we point out that when an e-bunch is injected in the… ▽ More For the purpose of laser wakefield acceleration, it turned out that also the injection of electron bunches longer than a plasma wavelength can generate accelerated femtosecond bunches with relatively low energy spread. This is of high interest because such injecting bunches can be provided, e.g., by state-of-the-art photo cathode RF guns. Here we point out that when an e-bunch is injected in the wakefield it is important to take into account the ponderomotive scattering of the injecting bunch by the laser pulse in the vacuum region located in front of the plasma. At low energies of the injected bunch this scattering results in a significant drop of the collection efficiency. Larger collection efficiency can by reached with lower intensity laser pulses and relatively high injection energies. We also estimate the minimum trap** energy for the injected electrons and the length of the trapped bunch. △ Less

Submitted 7 July, 2006; originally announced July 2006.

Comments: 12 pages, 5 figures, submitted to Phys. Rev. E