-
Microscale Morphology Driven Thermal Transport in Fiber Reinforced Polymer Composites
Authors:
Sabarinathan P Subramaniyan,
Jonathan D Boehnlein,
Pavana Prabhakar
Abstract:
Fiber-reinforced polymer composite (FRPC) materials are used extensively in various industries, such as aerospace, automobiles, and electronics packaging, due to their remarkable specific strength and desirable properties, such as enhanced durability and corrosion resistance. The evolution of thermal properties in FRPCs is crucial for advancing thermal management systems, optimizing material perfo…
▽ More
Fiber-reinforced polymer composite (FRPC) materials are used extensively in various industries, such as aerospace, automobiles, and electronics packaging, due to their remarkable specific strength and desirable properties, such as enhanced durability and corrosion resistance. The evolution of thermal properties in FRPCs is crucial for advancing thermal management systems, optimizing material performance, and enhancing energy efficiency across these diverse sectors. Despite significant research efforts to develop new materials with improved thermal properties and reduced thermal degradation, there is a lack of understanding of the thermal transport phenomena considering the influence of microscale reinforcement morphology in these composites. In the current study, we performed experimental investigations complemented by computations to determine the thermal transport properties and associated phenomena in epoxy and carbon fiber-reinforced epoxy composites. The experimental findings were utilized as input data for numerical analysis to examine the impact of fiber morphology and volume fraction in thermal transport phenomena. Our results revealed that composites incorporating non-circular fibers manifested higher thermal conductivity than traditional circular fibers in the transverse direction. This can be attributed to increased interconnected heat flow pathways facilitated by the increased surface area of non-circular fibers with the same cross-sectional areas, resulting in efficient heat transfer.
△ Less
Submitted 26 March, 2024;
originally announced March 2024.
-
Design and Construction of the MicroBooNE Detector
Authors:
MicroBooNE Collaboration,
R. Acciarri,
C. Adams,
R. An,
A. Aparicio,
S. Aponte,
J. Asaadi,
M. Auger,
N. Ayoub,
L. Bagby,
B. Baller,
R. Barger,
G. Barr,
M. Bass,
F. Bay,
K. Biery,
M. Bishai,
A. Blake,
V. Bocean,
D. Boehnlein,
V. D. Bogert,
T. Bolton,
L. Bugel,
C. Callahan,
L. Camilleri
, et al. (215 additional authors not shown)
Abstract:
This paper describes the design and construction of the MicroBooNE liquid argon time projection chamber and associated systems. MicroBooNE is the first phase of the Short Baseline Neutrino program, located at Fermilab, and will utilize the capabilities of liquid argon detectors to examine a rich assortment of physics topics. In this document details of design specifications, assembly procedures, a…
▽ More
This paper describes the design and construction of the MicroBooNE liquid argon time projection chamber and associated systems. MicroBooNE is the first phase of the Short Baseline Neutrino program, located at Fermilab, and will utilize the capabilities of liquid argon detectors to examine a rich assortment of physics topics. In this document details of design specifications, assembly procedures, and acceptance tests are reported.
△ Less
Submitted 17 January, 2017; v1 submitted 17 December, 2016;
originally announced December 2016.
-
The NuMI Neutrino Beam
Authors:
P. Adamson,
K. Anderson,
M. Andrews,
R. Andrews,
I. Anghel,
D. Augustine,
A. Aurisano,
S. Avvakumov,
D. S. Ayres,
B. Baller,
B. Barish,
G. Barr,
W. L. Barrett,
R. H. Bernstein,
J. Biggs,
M. Bishai,
A. Blake,
V. Bocean,
G. J. Bock,
D. J. Boehnlein,
D. Bogert,
K. Bourkland,
S. V. Cao,
C. M. Castromonte,
S. Childress
, et al. (165 additional authors not shown)
Abstract:
This paper describes the hardware and operations of the Neutrinos at the Main Injector (NuMI) beam at Fermilab. It elaborates on the design considerations for the beam as a whole and for individual elements. The most important design details of individual components are described. Beam monitoring systems and procedures, including the tuning and alignment of the beam and NuMI long-term performance,…
▽ More
This paper describes the hardware and operations of the Neutrinos at the Main Injector (NuMI) beam at Fermilab. It elaborates on the design considerations for the beam as a whole and for individual elements. The most important design details of individual components are described. Beam monitoring systems and procedures, including the tuning and alignment of the beam and NuMI long-term performance, are also discussed.
△ Less
Submitted 29 July, 2015; v1 submitted 23 July, 2015;
originally announced July 2015.
-
Radionuclides in the Cooling Water Systems for the NuMi Beamline and the Antiproton Production Target Station at Fermilab
Authors:
Hiroshi Matsumura,
Akihiro Toyoda,
Kotaro Bessho,
Shun Sekimoto,
Hiroshi Yashima,
Yoshimi Kasugai,
Norihiro Matsuda,
Yukio Sakamoto,
Hiroshi Nakashima,
Koji Oishi,
David Boehnlein,
Gary Lauten,
Anthony Leveling,
Nikolai Mokhov,
Kamran Vaziri
Abstract:
At the 120-GeV proton accelerator facilities of Fermilab, USA, water samples were collected from the cooling water systems for the target, magnetic horn1, magnetic horn2, decay pipe, and hadron absorber at the NuMI beamline as well as from the cooling water systems for the collection lens, pulse magnet and collimator, and beam absorber at the antiproton production target station, just after the sh…
▽ More
At the 120-GeV proton accelerator facilities of Fermilab, USA, water samples were collected from the cooling water systems for the target, magnetic horn1, magnetic horn2, decay pipe, and hadron absorber at the NuMI beamline as well as from the cooling water systems for the collection lens, pulse magnet and collimator, and beam absorber at the antiproton production target station, just after the shutdown of the accelerators for a maintenance period. Specific activities of γ -emitting radionuclides and 3H in these samples were determined using high-purity germanium detectors and a liquid scintillation counter. The cooling water contained various radionuclides depending on both major and minor materials in contact with the water. The activity of the radionuclides depended on the presence of a deionizer. Specific activities of 3H were used to estimate the residual rates of 7Be. The estimated residual rates of 7Be in the cooling water were approximately 5% for systems without deionizers and less than 0.1% for systems with deionizers, although the deionizers function to remove 7Be from the cooling water.
△ Less
Submitted 29 August, 2014;
originally announced September 2014.
-
Design, Calibration, and Performance of the MINERvA Detector
Authors:
L. Aliaga,
L. Bagby,
B. Baldin,
A. Baumbaugh,
A. Bodek,
R. Bradford,
W. K. Brooks,
D. Boehnlein,
S. Boyd,
H. Budd,
A. Butkevich,
D. A. Martinez Caicedo,
C. M. Castromonte,
M. E. Christy,
J. Chvojka,
H. da Motta,
D. S. Damiani,
I. Danko,
M. Datta,
R. DeMaat,
J. Devan,
E. Draeger,
S. A. Dytman,
G. A. Diaz,
B. Eberly
, et al. (80 additional authors not shown)
Abstract:
The MINERvA experiment is designed to perform precision studies of neutrino-nucleus scattering using $ν_μ$ and ${\barν}_μ$ neutrinos incident at 1-20 GeV in the NuMI beam at Fermilab. This article presents a detailed description of the \minerva detector and describes the {\em ex situ} and {\em in situ} techniques employed to characterize the detector and monitor its performance. The detector is co…
▽ More
The MINERvA experiment is designed to perform precision studies of neutrino-nucleus scattering using $ν_μ$ and ${\barν}_μ$ neutrinos incident at 1-20 GeV in the NuMI beam at Fermilab. This article presents a detailed description of the \minerva detector and describes the {\em ex situ} and {\em in situ} techniques employed to characterize the detector and monitor its performance. The detector is comprised of a finely-segmented scintillator-based inner tracking region surrounded by electromagnetic and hadronic sampling calorimetry. The upstream portion of the detector includes planes of graphite, iron and lead interleaved between tracking planes to facilitate the study of nuclear effects in neutrino interactions. Observations concerning the detector response over sustained periods of running are reported. The detector design and methods of operation have relevance to future neutrino experiments in which segmented scintillator tracking is utilized.
△ Less
Submitted 22 May, 2013;
originally announced May 2013.
-
Studies of muon-induced radioactivity at NuMI
Authors:
David J. Boehnlein
Abstract:
The JASMIN Collaboration has studied the production of radionuclides by muons in the muon alcoves of the NuMI beamline at Fermilab. Samples of aluminum and copper are exposed to the muon field and counted on HpGe detectors when removed to determine their content of radioactive isotopes. We compare the results to MARS simulations and discuss the radiological implications for neutrino factories and…
▽ More
The JASMIN Collaboration has studied the production of radionuclides by muons in the muon alcoves of the NuMI beamline at Fermilab. Samples of aluminum and copper are exposed to the muon field and counted on HpGe detectors when removed to determine their content of radioactive isotopes. We compare the results to MARS simulations and discuss the radiological implications for neutrino factories and muon colliders.
△ Less
Submitted 28 June, 2012;
originally announced June 2012.
-
Shielding experiments by the JASMIN collaboration at Fermilab (II) - Radioactivity measurement induced by secondary particles from the anti-proton production target
Authors:
Hiroshi Yashima,
Norihiro Matsuda,
Yoshimi Kasugai,
Hiroshi Matsumura,
Hiroshi Iwase,
Norikazu Kinoshita,
David Boehnlein,
Gary Lauten,
Anthony Leveling,
Nikolai Mokhov,
Kamran Vaziri,
Koji Oishi,
Hiroshi Nakashima,
Yukio Sakamoto
Abstract:
The JASMIN Collaboration has performed an experiment to conduct measurements of nuclear reaction rates around the anti-proton production (Pbar) target at the Fermi National Accelerator Laboratory (FNAL). At the Pbar target station, the target, consisting an Inconel 600 cylinder, was irradiated by a 120 GeV/c proton beam from the FNAL Main Injector. The beam intensity was 3.6 x 10**12 protons per s…
▽ More
The JASMIN Collaboration has performed an experiment to conduct measurements of nuclear reaction rates around the anti-proton production (Pbar) target at the Fermi National Accelerator Laboratory (FNAL). At the Pbar target station, the target, consisting an Inconel 600 cylinder, was irradiated by a 120 GeV/c proton beam from the FNAL Main Injector. The beam intensity was 3.6 x 10**12 protons per second. Samples of Al, Nb, Cu, and Au were placed near the target to investigate the spatial and energy distribution of secondary particles emitted from it. After irradiation, the induced activities of the samples were measured by studying their gamma ray spectra using HPGe detectors. The production rates of 30 nuclides induced in Al, Nb, Cu, Au samples were obtained. These rates increase for samples placed in a forward (small angle) position relative to the target. The angular dependence of these reaction rates becomes larger for increasing threshold energy. These experimental results are compared with Monte Carlo calculations. The calculated results generally agree with the experimental results to within a factor of 2 to 3.
△ Less
Submitted 16 February, 2012;
originally announced February 2012.
-
JASMIN: Japanese-American study of muon interactions and neutron detection
Authors:
Hiroshi Nakashima,
N. V. Mokhov,
Yoshimi Kasugai,
Norihiro Matsuda,
Yosuke Iwamoto,
Yukio Sakamoto,
Anthony F. Leveling,
David J. Boehnlein,
Kamran Vaziri,
Hiroshi Matsumura,
Masayuki Hagiwara,
Hiroshi Iwase,
Syuichi Ban,
Hideo Hirayama,
Takashi Nakamura,
Koji Oishi,
Nobuhiro Shigyo,
Hiroyuki Arakawa,
Tsuyoshi Kajimoto,
Kenji Ishibashi,
Hiroshi Yashima,
Shun Sekimoto,
Norikazu Kinoshita,
Hee-Seock Lee,
Koji Niita
Abstract:
Experimental studies of shielding and radiation effects at Fermi National Accelerator Laboratory (FNAL) have been carried out under collaboration between FNAL and Japan, aiming at benchmarking of simulation codes and study of irradiation effects for upgrade and design of new high-energy accelerator facilities. The purposes of this collaboration are (1) acquisition of shielding data in a proton bea…
▽ More
Experimental studies of shielding and radiation effects at Fermi National Accelerator Laboratory (FNAL) have been carried out under collaboration between FNAL and Japan, aiming at benchmarking of simulation codes and study of irradiation effects for upgrade and design of new high-energy accelerator facilities. The purposes of this collaboration are (1) acquisition of shielding data in a proton beam energy domain above 100 GeV; (2) further evaluation of predictive accuracy of the PHITS and MARS codes; (3) modification of physics models and data in these codes if needed; (4) establishment of irradiation field for radiation effect tests; and (5) development of a code module for improved description of radiation effects. A series of experiments has been performed at the Pbar target station and NuMI facility, using irradiation of targets with 120 GeV protons for antiproton and neutrino production, as well as the M-test beam line (M-test) for measuring nuclear data and detector responses. Various nuclear and shielding data have been measured by activation methods with chemical separation techniques as well as by other detectors such as a Bonner ball counter. Analyses with the experimental data are in progress for benchmarking the PHITS and MARS15 codes. In this presentation recent activities and results are reviewed.
△ Less
Submitted 9 February, 2012;
originally announced February 2012.
-
Neutron energy spectrum from 120 GeV protons on a thick copper target
Authors:
Nobuhiro Shigyo,
Toshiya Sanami,
Tsuyoshi Kajimoto,
Yosuke Iwamoto,
Masayuki Hagiwara,
Kiwamu Saito,
Kenji Ishibashi,
Hiroshi Nakashima,
Yukio Sakamoto,
Hee-Seock Lee,
Erik Ramberg,
Aria A. Meyhoefer,
Rick Coleman,
Doug Jensen,
Anthony F. Leveling,
David J. Boehnlein,
Nikolai V. Mokhov
Abstract:
Neutron energy spectrum from 120 GeV protons on a thick copper target was measured at the Meson Test Beam Facility (MTBF) at Fermi National Accelerator Laboratory. The data allows for evaluation of neutron production process implemented in theoretical simulation codes. It also helps exploring the reasons for some disagreement between calculation results and shielding benchmark data taken at high e…
▽ More
Neutron energy spectrum from 120 GeV protons on a thick copper target was measured at the Meson Test Beam Facility (MTBF) at Fermi National Accelerator Laboratory. The data allows for evaluation of neutron production process implemented in theoretical simulation codes. It also helps exploring the reasons for some disagreement between calculation results and shielding benchmark data taken at high energy accelerator facilities, since it is evaluated separately from neutron transport. The experiment was carried out using a 120 GeV proton beam of 3E5 protons/spill. Since the spill duration was 4 seconds, proton-induced events were counted pulse by pulse. The intensity was maintained using diffusers and collimators installed in the beam line to MTBF. The protons hit a copper block target the size of which is 5cm x 5cm x 60 cm long. The neutrons produced in the target were measured using NE213 liquid scintillator detectors, placed about 5.5 m away from the target at 30^{\circ} and 5 m 90^{\circ} with respect to the proton beam axis. The neutron energy was determined by time-of-flight technique using timing difference between the NE213 and a plastic scintillator located just before the target. Neutron detection efficiency of NE213 was determined on basis of experimental data from the high energy neutron beam line at Los Alamos National Laboratory. The neutron spectrum was compared with the results of multi-particle transport codes to validate the implemented theoretical models. The apparatus would be applied to future measurements to obtain a systematic data set for secondary particle production on various target materials.
△ Less
Submitted 7 February, 2012;
originally announced February 2012.
