-
Using graph neural networks to reconstruct charged pion showers in the CMS High Granularity Calorimeter
Authors:
M. Aamir,
B. Acar,
G. Adamov,
T. Adams,
C. Adloff,
S. Afanasiev,
C. Agrawal,
C. Agrawal,
A. Ahmad,
H. A. Ahmed,
S. Akbar,
N. Akchurin,
B. Akgul,
B. Akgun,
R. O. Akpinar,
E. Aktas,
A. AlKadhim,
V. Alexakhin,
J. Alimena,
J. Alison,
A. Alpana,
W. Alshehri,
P. Alvarez Dominguez,
M. Alyari,
C. Amendola
, et al. (550 additional authors not shown)
Abstract:
A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadr…
▽ More
A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadronic section. The shower reconstruction method is based on graph neural networks and it makes use of a dynamic reduction network architecture. It is shown that the algorithm is able to capture and mitigate the main effects that normally hinder the reconstruction of hadronic showers using classical reconstruction methods, by compensating for fluctuations in the multiplicity, energy, and spatial distributions of the shower's constituents. The performance of the algorithm is evaluated using test beam data collected in 2018 prototype of the CMS HGCAL accompanied by a section of the CALICE AHCAL prototype. The capability of the method to mitigate the impact of energy leakage from the calorimeter is also demonstrated.
△ Less
Submitted 30 June, 2024; v1 submitted 17 June, 2024;
originally announced June 2024.
-
Performance of the CMS High Granularity Calorimeter prototype to charged pion beams of 20$-$300 GeV/c
Authors:
B. Acar,
G. Adamov,
C. Adloff,
S. Afanasiev,
N. Akchurin,
B. Akgün,
M. Alhusseini,
J. Alison,
J. P. Figueiredo de sa Sousa de Almeida,
P. G. Dias de Almeida,
A. Alpana,
M. Alyari,
I. Andreev,
U. Aras,
P. Aspell,
I. O. Atakisi,
O. Bach,
A. Baden,
G. Bakas,
A. Bakshi,
S. Banerjee,
P. DeBarbaro,
P. Bargassa,
D. Barney,
F. Beaudette
, et al. (435 additional authors not shown)
Abstract:
The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimeter (HGCAL). The electromagnetic section of the HGCAL is based on silicon sensors interspersed between lead and copper (or copper tungsten) absorbers. The hadronic section uses layers of stainless steel as an absorbing med…
▽ More
The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimeter (HGCAL). The electromagnetic section of the HGCAL is based on silicon sensors interspersed between lead and copper (or copper tungsten) absorbers. The hadronic section uses layers of stainless steel as an absorbing medium and silicon sensors as an active medium in the regions of high radiation exposure, and scintillator tiles directly readout by silicon photomultipliers in the remaining regions. As part of the development of the detector and its readout electronic components, a section of a silicon-based HGCAL prototype detector along with a section of the CALICE AHCAL prototype was exposed to muons, electrons and charged pions in beam test experiments at the H2 beamline at the CERN SPS in October 2018. The AHCAL uses the same technology as foreseen for the HGCAL but with much finer longitudinal segmentation. The performance of the calorimeters in terms of energy response and resolution, longitudinal and transverse shower profiles is studied using negatively charged pions, and is compared to GEANT4 predictions. This is the first report summarizing results of hadronic showers measured by the HGCAL prototype using beam test data.
△ Less
Submitted 27 May, 2023; v1 submitted 9 November, 2022;
originally announced November 2022.
-
Vertex finding in neutrino-nucleus interaction: A Model Architecture Comparison
Authors:
F. Akbar,
A. Ghosh,
S. Young,
S. Akhter,
Z. Ahmad Dar,
V. Ansari,
M. V. Ascencio,
M. Sajjad Athar,
A. Bodek,
J. L. Bonilla,
A. Bravar,
H. Budd,
G. Caceres,
T. Cai,
M. F. Carneiro,
G. A. Díaz,
J. Felix,
L. Fields,
A. Filkins,
R. Fine,
P. K. Gaura,
R. Gran,
D. A. Harris,
D. Jena,
S. Jena
, et al. (26 additional authors not shown)
Abstract:
We compare different neural network architectures for Machine Learning (ML) algorithms designed to identify the neutrino interaction vertex position in the MINERvA detector. The architectures developed and optimized by hand are compared with the architectures developed in an automated way using the package "Multi-node Evolutionary Neural Networks for Deep Learning" (MENNDL), developed at Oak Ridge…
▽ More
We compare different neural network architectures for Machine Learning (ML) algorithms designed to identify the neutrino interaction vertex position in the MINERvA detector. The architectures developed and optimized by hand are compared with the architectures developed in an automated way using the package "Multi-node Evolutionary Neural Networks for Deep Learning" (MENNDL), developed at Oak Ridge National Laboratory (ORNL). The two architectures resulted in a similar performance which suggests that the systematics associated with the optimized network architecture are small. Furthermore, we find that while the domain expert hand-tuned network was the best performer, the differences were negligible and the auto-generated networks performed well. There is always a trade-off between human, and computer resources for network optimization and this work suggests that automated optimization, assuming resources are available, provides a compelling way to save significant expert time.
△ Less
Submitted 7 January, 2022;
originally announced January 2022.
-
Response of a CMS HGCAL silicon-pad electromagnetic calorimeter prototype to 20-300 GeV positrons
Authors:
B. Acar,
G. Adamov,
C. Adloff,
S. Afanasiev,
N. Akchurin,
B. Akgün,
F. Alam Khan,
M. Alhusseini,
J. Alison,
A. Alpana,
G. Altopp,
M. Alyari,
S. An,
S. Anagul,
I. Andreev,
P. Aspell,
I. O. Atakisi,
O. Bach,
A. Baden,
G. Bakas,
A. Bakshi,
S. Bannerjee,
P. Bargassa,
D. Barney,
F. Beaudette
, et al. (364 additional authors not shown)
Abstract:
The Compact Muon Solenoid Collaboration is designing a new high-granularity endcap calorimeter, HGCAL, to be installed later this decade. As part of this development work, a prototype system was built, with an electromagnetic section consisting of 14 double-sided structures, providing 28 sampling layers. Each sampling layer has an hexagonal module, where a multipad large-area silicon sensor is glu…
▽ More
The Compact Muon Solenoid Collaboration is designing a new high-granularity endcap calorimeter, HGCAL, to be installed later this decade. As part of this development work, a prototype system was built, with an electromagnetic section consisting of 14 double-sided structures, providing 28 sampling layers. Each sampling layer has an hexagonal module, where a multipad large-area silicon sensor is glued between an electronics circuit board and a metal baseplate. The sensor pads of approximately 1 cm$^2$ are wire-bonded to the circuit board and are readout by custom integrated circuits. The prototype was extensively tested with beams at CERN's Super Proton Synchrotron in 2018. Based on the data collected with beams of positrons, with energies ranging from 20 to 300 GeV, measurements of the energy resolution and linearity, the position and angular resolutions, and the shower shapes are presented and compared to a detailed Geant4 simulation.
△ Less
Submitted 31 March, 2022; v1 submitted 12 November, 2021;
originally announced November 2021.
-
Construction and commissioning of CMS CE prototype silicon modules
Authors:
B. Acar,
G. Adamov,
C. Adloff,
S. Afanasiev,
N. Akchurin,
B. Akgün,
M. Alhusseini,
J. Alison,
G. Altopp,
M. Alyari,
S. An,
S. Anagul,
I. Andreev,
M. Andrews,
P. Aspell,
I. A. Atakisi,
O. Bach,
A. Baden,
G. Bakas,
A. Bakshi,
P. Bargassa,
D. Barney,
E. Becheva,
P. Behera,
A. Belloni
, et al. (307 additional authors not shown)
Abstract:
As part of its HL-LHC upgrade program, the CMS Collaboration is develo** a High Granularity Calorimeter (CE) to replace the existing endcap calorimeters. The CE is a sampling calorimeter with unprecedented transverse and longitudinal readout for both electromagnetic (CE-E) and hadronic (CE-H) compartments. The calorimeter will be built with $\sim$30,000 hexagonal silicon modules. Prototype modul…
▽ More
As part of its HL-LHC upgrade program, the CMS Collaboration is develo** a High Granularity Calorimeter (CE) to replace the existing endcap calorimeters. The CE is a sampling calorimeter with unprecedented transverse and longitudinal readout for both electromagnetic (CE-E) and hadronic (CE-H) compartments. The calorimeter will be built with $\sim$30,000 hexagonal silicon modules. Prototype modules have been constructed with 6-inch hexagonal silicon sensors with cell areas of 1.1~$cm^2$, and the SKIROC2-CMS readout ASIC. Beam tests of different sampling configurations were conducted with the prototype modules at DESY and CERN in 2017 and 2018. This paper describes the construction and commissioning of the CE calorimeter prototype, the silicon modules used in the construction, their basic performance, and the methods used for their calibration.
△ Less
Submitted 10 December, 2020;
originally announced December 2020.
-
The DAQ system of the 12,000 Channel CMS High Granularity Calorimeter Prototype
Authors:
B. Acar,
G. Adamov,
C. Adloff,
S. Afanasiev,
N. Akchurin,
B. Akgün,
M. Alhusseini,
J. Alison,
G. Altopp,
M. Alyari,
S. An,
S. Anagul,
I. Andreev,
M. Andrews,
P. Aspell,
I. A. Atakisi,
O. Bach,
A. Baden,
G. Bakas,
A. Bakshi,
P. Bargassa,
D. Barney,
E. Becheva,
P. Behera,
A. Belloni
, et al. (307 additional authors not shown)
Abstract:
The CMS experiment at the CERN LHC will be upgraded to accommodate the 5-fold increase in the instantaneous luminosity expected at the High-Luminosity LHC (HL-LHC). Concomitant with this increase will be an increase in the number of interactions in each bunch crossing and a significant increase in the total ionising dose and fluence. One part of this upgrade is the replacement of the current endca…
▽ More
The CMS experiment at the CERN LHC will be upgraded to accommodate the 5-fold increase in the instantaneous luminosity expected at the High-Luminosity LHC (HL-LHC). Concomitant with this increase will be an increase in the number of interactions in each bunch crossing and a significant increase in the total ionising dose and fluence. One part of this upgrade is the replacement of the current endcap calorimeters with a high granularity sampling calorimeter equipped with silicon sensors, designed to manage the high collision rates. As part of the development of this calorimeter, a series of beam tests have been conducted with different sampling configurations using prototype segmented silicon detectors. In the most recent of these tests, conducted in late 2018 at the CERN SPS, the performance of a prototype calorimeter equipped with ${\approx}12,000\rm{~channels}$ of silicon sensors was studied with beams of high-energy electrons, pions and muons. This paper describes the custom-built scalable data acquisition system that was built with readily available FPGA mezzanines and low-cost Raspberry PI computers.
△ Less
Submitted 8 December, 2020; v1 submitted 7 December, 2020;
originally announced December 2020.
-
Measurement of $K^{+}$ production in charged-current $ν_μ$ interactions
Authors:
C. M. Marshall,
L. Aliaga,
O. Altinok,
L. Bellantoni,
A. Bercellie,
M. Betancourt,
A. Bodek,
A. Bravar,
H. Budd,
T. Cai,
M. F. Carneiro,
J. Chvojka,
H. da Motta,
J. Devan,
S. A. Dytman,
G. A. Díaz,
B. Eberly,
E. Endress,
J. Felix,
L. Fields,
A. Filkins,
R. Fine,
A. M. Gago,
R. Galindo,
H. Gallagher
, et al. (57 additional authors not shown)
Abstract:
Production of K^{+} mesons in charged-current ν_μ interactions on plastic scintillator (CH) is measured using MINERvA exposed to the low-energy NuMI beam at Fermilab. Timing information is used to isolate a sample of 885 charged-current events containing a stop** K^{+} which decays at rest. The differential cross section in K^{+} kinetic energy, dσ/dT_{K}, is observed to be relatively flat betwe…
▽ More
Production of K^{+} mesons in charged-current ν_μ interactions on plastic scintillator (CH) is measured using MINERvA exposed to the low-energy NuMI beam at Fermilab. Timing information is used to isolate a sample of 885 charged-current events containing a stop** K^{+} which decays at rest. The differential cross section in K^{+} kinetic energy, dσ/dT_{K}, is observed to be relatively flat between 0 and 500 MeV. Its shape is in good agreement with the prediction by the \textsc{genie} neutrino event generator when final-state interactions are included, however the data rate is lower than the prediction by 15\%.
△ Less
Submitted 25 July, 2016; v1 submitted 13 April, 2016;
originally announced April 2016.
-
Evidence for neutral-current diffractive neutral pion production from hydrogen in neutrino interactions on hydrocarbon
Authors:
MINERvA Collaboration,
J. Wolcott,
L. Aliaga,
O. Altinok,
A. Bercellie,
M. Betancourt,
A. Bodek,
A. Bravar,
H. Budd,
T. Cai,
M. F. Carneiro,
J. Chvojka,
H. da Motta,
J. Devan,
S. A. Dytman,
G. A. Díaz,
B. Eberly,
E. Endress,
J. Felix,
L. Fields,
R. Fine,
R. Galindo,
H. Gallagher,
T. Golan,
R. Gran
, et al. (46 additional authors not shown)
Abstract:
The MINERvA experiment observes an excess of events containing electromagnetic showers relative to the expectation from Monte Carlo simulations in neutral-current neutrino interactions with mean beam energy of 4.5 GeV on a hydrocarbon target. The excess is characterized and found to be consistent with neutral-current neutral pion production with a broad energy distribution peaking at 7 GeV and a t…
▽ More
The MINERvA experiment observes an excess of events containing electromagnetic showers relative to the expectation from Monte Carlo simulations in neutral-current neutrino interactions with mean beam energy of 4.5 GeV on a hydrocarbon target. The excess is characterized and found to be consistent with neutral-current neutral pion production with a broad energy distribution peaking at 7 GeV and a total cross section of 0.26 +- 0.02 (stat) +- 0.08 (sys) x 10^{-39} cm^{2}. The angular distribution, electromagnetic shower energy, and spatial distribution of the energy depositions of the excess are consistent with expectations from neutrino neutral-current diffractive neutral pion production from hydrogen in the hydrocarbon target. These data comprise the first direct experimental observation and constraint for a reaction that poses an important background process in neutrino oscillation experiments searching for muon neutrino to electron neutrino oscillations.
△ Less
Submitted 28 July, 2016; v1 submitted 6 April, 2016;
originally announced April 2016.
-
Measurement of Neutrino Flux from Neutrino-Electron Elastic Scattering
Authors:
MINERvA Collaboration,
J. Park,
L. Aliaga,
O. Altinok,
L. Bellantoni,
A. Bercellie,
M. Betancourt,
A. Bodek,
A. Bravar,
H. Budd,
T. Cai,
M. F. Carneiro,
M. E. Christy,
J. Chvojka,
H. da Motta,
S. A. Dytman,
G. A. Diaz,
B. Eberly,
J. Felix,
L. Fields,
R. Fine,
A. M. Gago,
R. Galindo,
A. Ghosh,
T. Golan
, et al. (44 additional authors not shown)
Abstract:
Muon-neutrino elastic scattering on electrons is an observable neutrino process whose cross section is precisely known. Consequently a measurement of this process in an accelerator-based $ν_μ$ beam can improve the knowledge of the absolute neutrino flux im**ing upon the detector; typically this knowledge is limited to $\sim$ 10% due to uncertainties in hadron production and focusing. We have iso…
▽ More
Muon-neutrino elastic scattering on electrons is an observable neutrino process whose cross section is precisely known. Consequently a measurement of this process in an accelerator-based $ν_μ$ beam can improve the knowledge of the absolute neutrino flux im**ing upon the detector; typically this knowledge is limited to $\sim$ 10% due to uncertainties in hadron production and focusing. We have isolated a sample of 135 $\pm$ 17 neutrino-electron elastic scattering candidates in the segmented scintillator detector of MINERvA, after subtracting backgrounds and correcting for efficiency. We show how this sample can be used to reduce the total uncertainty on the NuMI $ν_μ$ flux from 9% to 6%. Our measurement provides a flux constraint that is useful to other experiments using the NuMI beam, and this technique is applicable to future neutrino beams operating at multi-GeV energies.
△ Less
Submitted 15 June, 2016; v1 submitted 23 December, 2015;
originally announced December 2015.
-
MINERvA neutrino detector response measured with test beam data
Authors:
MINERvA Collaboration,
L. Aliaga,
O. Altinok,
C. Araujo Del Castillo,
L. Bagby,
L. Bellantoni,
W. F. Bergan,
A. Bodek,
R. Bradford,
A. Bravar,
H. Budd,
A. Butkevich,
D. A. Martinez Caicedo,
M. F. Carneiro,
M. E. Christy,
J. Chvojka,
H. da Motta,
J. Devan,
G. A. Diaz,
S. A. Dytman,
B. Eberly,
J. Felix,
L. Fields,
R. Fine,
R. Flight
, et al. (63 additional authors not shown)
Abstract:
The MINERvA collaboration operated a scaled-down replica of the solid scintillator tracking and sampling calorimeter regions of the MINERvA detector in a hadron test beam at the Fermilab Test Beam Facility. This article reports measurements with samples of protons, pions, and electrons from 0.35 to 2.0 GeV/c momentum. The calorimetric response to protons, pions, and electrons are obtained from the…
▽ More
The MINERvA collaboration operated a scaled-down replica of the solid scintillator tracking and sampling calorimeter regions of the MINERvA detector in a hadron test beam at the Fermilab Test Beam Facility. This article reports measurements with samples of protons, pions, and electrons from 0.35 to 2.0 GeV/c momentum. The calorimetric response to protons, pions, and electrons are obtained from these data. A measurement of the parameter in Birks' law and an estimate of the tracking efficiency are extracted from the proton sample. Overall the data are well described by a Geant4-based Monte Carlo simulation of the detector and particle interactions with agreements better than 4%, though some features of the data are not precisely modeled. These measurements are used to tune the MINERvA detector simulation and evaluate systematic uncertainties in support of the MINERvA neutrino cross section measurement program.
△ Less
Submitted 7 April, 2015; v1 submitted 26 January, 2015;
originally announced January 2015.
-
Design, Calibration, and Performance of the MINERvA Detector
Authors:
L. Aliaga,
L. Bagby,
B. Baldin,
A. Baumbaugh,
A. Bodek,
R. Bradford,
W. K. Brooks,
D. Boehnlein,
S. Boyd,
H. Budd,
A. Butkevich,
D. A. Martinez Caicedo,
C. M. Castromonte,
M. E. Christy,
J. Chvojka,
H. da Motta,
D. S. Damiani,
I. Danko,
M. Datta,
R. DeMaat,
J. Devan,
E. Draeger,
S. A. Dytman,
G. A. Diaz,
B. Eberly
, et al. (80 additional authors not shown)
Abstract:
The MINERvA experiment is designed to perform precision studies of neutrino-nucleus scattering using $ν_μ$ and ${\barν}_μ$ neutrinos incident at 1-20 GeV in the NuMI beam at Fermilab. This article presents a detailed description of the \minerva detector and describes the {\em ex situ} and {\em in situ} techniques employed to characterize the detector and monitor its performance. The detector is co…
▽ More
The MINERvA experiment is designed to perform precision studies of neutrino-nucleus scattering using $ν_μ$ and ${\barν}_μ$ neutrinos incident at 1-20 GeV in the NuMI beam at Fermilab. This article presents a detailed description of the \minerva detector and describes the {\em ex situ} and {\em in situ} techniques employed to characterize the detector and monitor its performance. The detector is comprised of a finely-segmented scintillator-based inner tracking region surrounded by electromagnetic and hadronic sampling calorimetry. The upstream portion of the detector includes planes of graphite, iron and lead interleaved between tracking planes to facilitate the study of nuclear effects in neutrino interactions. Observations concerning the detector response over sustained periods of running are reported. The detector design and methods of operation have relevance to future neutrino experiments in which segmented scintillator tracking is utilized.
△ Less
Submitted 22 May, 2013;
originally announced May 2013.
-
The T2K ND280 Off-Axis Pi-Zero Detector
Authors:
S. Assylbekov,
B. E. Berger,
H. Berns,
D. Beznosko,
A. Bodek,
R. Bradford,
N. Buchanan,
H. Budd,
Y. Caffari,
K. Connolly,
I. Danko,
R. Das,
S. Davis,
M. Day,
S. Dytman,
M. Dziomba,
R. Flight,
D. Forbush,
K. Gilje,
D. Hansen,
J. Hignight,
J. Imber,
R. A. Johnson,
C. K. Jung,
V. Kravtsov
, et al. (31 additional authors not shown)
Abstract:
The Pi-Zero detector (PØD) is one of the subdetectors that makes up the off-axis near detector for the Tokai-to-Kamioka (T2K) long baseline neutrino experiment. The primary goal for the PØD is to measure the relevant cross sections for neutrino interactions that generate pi-zero's, especially the cross section for neutral current pi-zero interactions, which are one of the dominant sources of backg…
▽ More
The Pi-Zero detector (PØD) is one of the subdetectors that makes up the off-axis near detector for the Tokai-to-Kamioka (T2K) long baseline neutrino experiment. The primary goal for the PØD is to measure the relevant cross sections for neutrino interactions that generate pi-zero's, especially the cross section for neutral current pi-zero interactions, which are one of the dominant sources of background to the electron neutrino appearance signal in T2K. The PØD is composed of layers of plastic scintillator alternating with water bags and brass sheets or lead sheets and is one of the first detectors to use Multi-Pixel Photon Counters (MPPCs) on a large scale.
△ Less
Submitted 28 June, 2012; v1 submitted 21 November, 2011;
originally announced November 2011.
-
The T2K Experiment
Authors:
T2K Collaboration,
K. Abe,
N. Abgrall,
H. Aihara,
Y. Ajima,
J. B. Albert,
D. Allan,
P. -A. Amaudruz,
C. Andreopoulos,
B. Andrieu,
M. D. Anerella,
C. Angelsen,
S. Aoki,
O. Araoka,
J. Argyriades,
A. Ariga,
T. Ariga,
S. Assylbekov,
J. P. A. M. de André,
D. Autiero,
A. Badertscher,
O. Ballester,
M. Barbi,
G. J. Barker,
P. Baron
, et al. (499 additional authors not shown)
Abstract:
The T2K experiment is a long-baseline neutrino oscillation experiment. Its main goal is to measure the last unknown lepton sector mixing angle θ_{13} by observing ν_e appearance in a ν_μ beam. It also aims to make a precision measurement of the known oscillation parameters, Δm^{2}_{23} and sin^{2} 2θ_{23}, via ν_μ disappearance studies. Other goals of the experiment include various neutrino cross…
▽ More
The T2K experiment is a long-baseline neutrino oscillation experiment. Its main goal is to measure the last unknown lepton sector mixing angle θ_{13} by observing ν_e appearance in a ν_μ beam. It also aims to make a precision measurement of the known oscillation parameters, Δm^{2}_{23} and sin^{2} 2θ_{23}, via ν_μ disappearance studies. Other goals of the experiment include various neutrino cross section measurements and sterile neutrino searches. The experiment uses an intense proton beam generated by the J-PARC accelerator in Tokai, Japan, and is composed of a neutrino beamline, a near detector complex (ND280), and a far detector (Super-Kamiokande) located 295 km away from J-PARC. This paper provides a comprehensive review of the instrumentation aspect of the T2K experiment and a summary of the vital information for each subsystem.
△ Less
Submitted 8 June, 2011; v1 submitted 6 June, 2011;
originally announced June 2011.
-
A simple event weighting technique for optimizing the measurement of the forward-backward asymmetry of Drell-Yan dilepton pairs at hadron colliders
Authors:
Arie Bodek
Abstract:
We describe a simple technique for optimizing the extraction of the forward-backward asymmetry ($A_{fb}$) of Drell-Yan lepton pairs ($e^+e^-$,$ μ^+μ^-$) produced in $\bar{p}p$ and $pp$ collisions at hadron colliders. The method employs simple event weights which are functions of the rapidity and $cosθ$ decay angle of the lepton pair. It yields the best estimate of the acceptance corrected parton l…
▽ More
We describe a simple technique for optimizing the extraction of the forward-backward asymmetry ($A_{fb}$) of Drell-Yan lepton pairs ($e^+e^-$,$ μ^+μ^-$) produced in $\bar{p}p$ and $pp$ collisions at hadron colliders. The method employs simple event weights which are functions of the rapidity and $cosθ$ decay angle of the lepton pair. It yields the best estimate of the acceptance corrected parton level ($\bar{q}q$) forward backward asymmetry as a function of final state dilepton mass ($M_{\ell\ell}$). Typically, when compared to the simple count method, the technique reduces the statistical errors by 20% for $\bar{p}p$, and 40% for $pp$ collisions, respectively. The technique can be used to search for new high mass and large width Z' bosons which may be best detected through the observation of deviations from the Standard Model expectation for the forward-backward asymmetry. In addition, we derive expressions for the QCD angular coefficients for Drell-Yan events.
△ Less
Submitted 12 July, 2010; v1 submitted 15 November, 2009;
originally announced November 2009.
-
A Study of an Acrylic Cerenkov Radiation Detector
Authors:
B. Porter,
P. Auchincloss,
P. de Barbaro,
A. Bodek,
H. Budd
Abstract:
An experiment investigating the angle of Cerenkov light emitted by 3-MeV electrons traversing an acrylic detector has been developed for use in the advanced physics laboratory course at the University of Rochester. In addition to exploring the experimental phenomena of Cerenkov radiation and total internal reflection, the experiment introduces students to several experimental techniques used in…
▽ More
An experiment investigating the angle of Cerenkov light emitted by 3-MeV electrons traversing an acrylic detector has been developed for use in the advanced physics laboratory course at the University of Rochester. In addition to exploring the experimental phenomena of Cerenkov radiation and total internal reflection, the experiment introduces students to several experimental techniques used in actual high energy and nuclear physics experiments, as well as to analysis techniques involving Poisson statistics. [to be published in Am. J. Phys. 67 (Oct/Nov 1999).]
△ Less
Submitted 24 August, 1999;
originally announced August 1999.