-
A Review of NEST Models, and Their Application to Improvement of Particle Identification in Liquid Xenon Experiments
Authors:
M. Szydagis,
J. Balajthy,
G. A. Block,
J. P. Brodsky,
E. Brown,
J. E. Cutter,
S. J. Farrell,
J. Huang,
E. S. Kozlova,
C. S. Liebenthal,
D. N. McKinsey,
K. McMichael,
M. Mooney,
J. Mueller,
K. Ni,
G. R. C. Rischbieter,
M. Tripathi,
C. D. Tunnell,
V. Velan,
M. D. Wyman,
Z. Zhao,
M. Zhong
Abstract:
This paper discusses microphysical simulation of interactions in liquid xenon, the active detector medium in many leading rare-event physics searches, and describes experimental observables useful to understanding detector performance. The scintillation and ionization yield distributions for signal and background are presented using the Noble Element Simulation Technique, or NEST, which is a toolk…
▽ More
This paper discusses microphysical simulation of interactions in liquid xenon, the active detector medium in many leading rare-event physics searches, and describes experimental observables useful to understanding detector performance. The scintillation and ionization yield distributions for signal and background are presented using the Noble Element Simulation Technique, or NEST, which is a toolkit based upon experimental data and simple, empirical formulae. NEST models of light and of charge production as a function of particle type, energy, and electric field are reviewed, as well as of energy resolution and final pulse areas. After vetting of NEST against raw data, with several specific examples pulled from XENON, ZEPLIN, LUX / LZ, and PandaX, we interpolate and extrapolate its models to draw new conclusions on the properties of future detectors (e.g., XLZD), in terms of the best possible discrimination of electronic recoil backgrounds from the potential nuclear recoil signal due to WIMP dark matter. We find that the oft-quoted value of a 99.5% discrimination is likely too conservative. NEST shows that another order of magnitude improvement (99.95% discrimination) may be achievable with a high photon detection efficiency (g1 about 15-20%) and reasonably achievable drift field of approximately 300 V/cm.
△ Less
Submitted 14 December, 2023; v1 submitted 19 November, 2022;
originally announced November 2022.
-
Milliwatt terahertz harmonic generation from topological insulator metamaterials
Authors:
Klaas-Jan Tielrooij,
Alessandro Principi,
David Saleta Reig,
Alexander Block,
Sebin Varghese,
Steffen Schreyeck,
Karl Brunner,
Grzegorz Karczewski,
Igor Ilyakov,
Oleksiy Ponomaryov,
Thales V. A. G. de Oliveira,
Min Chen,
Jan-Christoph Deinert,
Carmen Gomez Carbonell,
Sergio O. Valenzuela,
Laurens W. Molenkamp,
Tobias Kiessling,
Georgy V. Astakhov,
Sergey Kovalev
Abstract:
Achieving efficient, high-power harmonic generation in the terahertz spectral domain has technological applications, for example in sixth generation (6G) communication networks. Massless Dirac fermions possess extremely large terahertz nonlinear susceptibilities and harmonic conversion efficiencies. However, the observed maximum generated harmonic power is limited, because of saturation effects at…
▽ More
Achieving efficient, high-power harmonic generation in the terahertz spectral domain has technological applications, for example in sixth generation (6G) communication networks. Massless Dirac fermions possess extremely large terahertz nonlinear susceptibilities and harmonic conversion efficiencies. However, the observed maximum generated harmonic power is limited, because of saturation effects at increasing incident powers, as shown recently for graphene. Here, we demonstrate room-temperature terahertz harmonic generation in a Bi$_2$Se$_3$ topological insulator and topological-insulator-grating metamaterial structures with surface-selective terahertz field enhancement. We obtain a third-harmonic power approaching the milliwatt range for an incident power of 75 mW - an improvement by two orders of magnitude compared to a benchmarked graphene sample. We establish a framework in which this exceptional performance is the result of thermodynamic harmonic generation by the massless topological surface states, benefiting from ultrafast dissipation of electronic heat via surface-bulk Coulomb interactions. These results are an important step towards on-chip terahertz (opto)electronic applications.
△ Less
Submitted 1 November, 2022;
originally announced November 2022.
-
Retrospective clinical evaluation of a decision-support software for adaptive radiotherapy of Head & Neck cancer patients
Authors:
Sébastien A A Gros,
Anand P Santhanam,
Alec M Block,
Bahman Emami,
Brian H Lee,
Cara Joyce
Abstract:
Purpose: To evaluate the clinical need for automated decision-support platforms for Adaptive Radiotherapy Therapy (ART) of Head & Neck cancer (HNC) patients. Methods: We tested RTapp (SegAna), a new decision-support software for ART, to investigate 22 HNC patients data retrospectively. For each fraction, RTapp estimated the daily and cumulative doses received by targets and OARs from daily 3D imag…
▽ More
Purpose: To evaluate the clinical need for automated decision-support platforms for Adaptive Radiotherapy Therapy (ART) of Head & Neck cancer (HNC) patients. Methods: We tested RTapp (SegAna), a new decision-support software for ART, to investigate 22 HNC patients data retrospectively. For each fraction, RTapp estimated the daily and cumulative doses received by targets and OARs from daily 3D imaging in real-time. RTapp also included a prediction algorithm that analyzed dosimetric parameters (DP) trends against dosimetric endpoints (DE) to trigger adaptation up to 4 fractions ahead. Warning (V95<95%) and adaptation (V95<93%) DEs were set for PTVs. OAR adaptation DEs of +10% (DE10) were set for all Dmax and Dmean DPs. Any DE violation at end of treatment (EOT) triggered a DP trends review to determine the DE-crossing fraction Fx and evaluate the prediction model accuracy (difference between calculated and predicted DP values with 95% confidence intervals). Results: RTapp was able to address the needs of treatment adaptation. 15/22 studies (68%) violated PTV coverage or parotids Dmean at EOT. 9 PTVs had V95<95% (mean coverage decrease of -7.7+/-3.3 %) including 4 flagged for adaptation at median Fx=11.5 (range: 6-18). 15 parotids were flagged for exceeding Dmean constraints with median increase of +3.18 Gy (range: 0.18-6.31 Gy) at EOT, including 8 with DP>DE10. The differences between predicted and calculated PTV V95 and parotids Dmean was up to 7.6% (mean: -2.9+/-4.6 %) and 5 Gy (mean: 0.2+/-1.6 Gy), respectively. The most accurate predictions were obtained closest to Fx. For parotids, Fx ranged between fractions 1 to 23, the lack of specific trend demonstrated the need to verify treatment adaptation for every fraction. Conclusion: Integrated in an ART clinical workflow, RTapp can predict whether specific treatment would require adaptation up to 4 fractions ahead of time.
△ Less
Submitted 3 October, 2021;
originally announced October 2021.
-
Hot-Carrier Cooling in High-Quality Graphene is Intrinsically Limited by Optical Phonons
Authors:
Eva A. A. Pogna,
Xiaoyu Jia,
Alessandro Principi,
Alexander Block,
Luca Banszerus,
**can Zhang,
Xiaoting Liu,
Thibault Sohier,
Stiven Forti,
Karuppasamy Soundarapandian,
Bernat Terrés,
Jake D. Mehew,
Chiara Trovatello,
Camilla Coletti,
Frank H. L. Koppens,
Mischa Bonn,
Niek van Hulst,
Matthieu J. Verstraete,
Hailin Peng,
Zhongfan Liu,
Christoph Stampfer,
Giulio Cerullo,
Klaas-Jan Tielrooij
Abstract:
Many promising optoelectronic devices, such as broadband photodetectors, nonlinear frequency converters, and building blocks for data communication systems, exploit photoexcited charge carriers in graphene. For these systems, it is essential to understand, and eventually control, the cooling dynamics of the photoinduced hot-carrier distribution. There is, however, still an active debate on the dif…
▽ More
Many promising optoelectronic devices, such as broadband photodetectors, nonlinear frequency converters, and building blocks for data communication systems, exploit photoexcited charge carriers in graphene. For these systems, it is essential to understand, and eventually control, the cooling dynamics of the photoinduced hot-carrier distribution. There is, however, still an active debate on the different mechanisms that contribute to hot-carrier cooling. In particular, the intrinsic cooling mechanism that ultimately limits the cooling dynamics remains an open question. Here, we address this question by studying two technologically relevant systems, consisting of high-quality graphene with a mobility >10,000 cm$^2$V$^{-1}$s$^{-1}$ and environments that do not efficiently take up electronic heat from graphene: WSe$_2$-encapsulated graphene and suspended graphene. We study the cooling dynamics of these two high-quality graphene systems using ultrafast pump-probe spectroscopy at room temperature. Cooling via disorder-assisted acoustic phonon scattering and out-of-plane heat transfer to the environment is relatively inefficient in these systems, predicting a cooling time of tens of picoseconds. However, we observe much faster cooling, on a timescale of a few picoseconds. We attribute this to an intrinsic cooling mechanism, where carriers in the hot-carrier distribution with enough kinetic energy emit optical phonons. During phonon emission, the electronic system continuously re-thermalizes, re-creating carriers with enough energy to emit optical phonons. We develop an analytical model that explains the observed dynamics, where cooling is eventually limited by optical-to-acoustic phonon coupling. These fundamental insights into the intrinsic cooling mechanism of hot carriers in graphene will play a key role in guiding the development of graphene-based optoelectronic devices.
△ Less
Submitted 5 March, 2021;
originally announced March 2021.
-
A Comparison of Proton Stop** Power Measured with Proton CT and x-ray CT in Fresh Post-Mortem Porcine Structures
Authors:
Don F. DeJongh,
Ethan A. DeJongh,
Victor Rykalin,
Greg DeFillippo,
Mark Pankuch,
Andrew W. Best,
George Coutrakon,
Kirk L. Duffin,
Nicholas T. Karonis,
Caesar E. Ordoñez,
Christina Sarosiek,
Reinhard W. Schulte,
John R. Winans,
Alec M. Block,
Courtney L. Hentz,
James S. Welsh
Abstract:
Purpose: Currently, calculations of proton range in proton therapy patients are based on a conversion of CT Hounsfield Units of patient tissues into proton relative stop** power. Uncertainties in this conversion necessitate larger proximal and distal planned target volume margins. Proton CT can potentially reduce these uncertainties by directly measuring proton stop** power. We aim to demonstr…
▽ More
Purpose: Currently, calculations of proton range in proton therapy patients are based on a conversion of CT Hounsfield Units of patient tissues into proton relative stop** power. Uncertainties in this conversion necessitate larger proximal and distal planned target volume margins. Proton CT can potentially reduce these uncertainties by directly measuring proton stop** power. We aim to demonstrate proton CT imaging with complex porcine samples, to analyze in detail three-dimensional regions of interest, and to compare proton stop** powers directly measured by proton CT to those determined from x-ray CT scans.
Methods: We have used a prototype proton imaging system with single proton tracking to acquire proton radiography and proton CT images of a sample of porcine pectoral girdle and ribs, and a pig's head. We also acquired close in time x-ray CT scans of the same samples, and compared proton stop** power measurements from the two modalities. In the case of the pig's head, we obtained x-ray CT scans from two different scanners, and compared results from high-dose and low-dose settings.
Results: Comparing our reconstructed proton CT images with images derived from x-ray CT scans, we find agreement within 1% to 2% for soft tissues, and discrepancies of up to 6% for compact bone. We also observed large discrepancies, up to 40%, for cavitated regions with mixed content of air, soft tissue, and bone, such as sinus cavities or tympanic bullae.
Conclusions: Our images and findings from a clinically realistic proton CT scanner demonstrate the potential for proton CT to be used for low-dose treatment planning with reduced margins.
△ Less
Submitted 29 October, 2021; v1 submitted 11 December, 2020;
originally announced December 2020.
-
Observation of giant and tuneable thermal diffusivity of Dirac fluid at room temperature
Authors:
Alexander Block,
Alessandro Principi,
Niels C. H. Hesp,
Aron W. Cummings,
Matz Liebel,
Kenji Watanabe,
Takashi Taniguchi,
Stephan Roche,
Frank H. L. Koppens,
Niek F. van Hulst,
Klaas-Jan Tielrooij
Abstract:
Conducting materials typically exhibit either diffusive or ballistic charge transport. However, when electron-electron interactions dominate, a hydrodynamic regime with viscous charge flow emerges (1-13). More stringent conditions eventually yield a quantum-critical Dirac-fluid regime, where electronic heat can flow more efficiently than charge (14-22). Here we observe heat transport in graphene i…
▽ More
Conducting materials typically exhibit either diffusive or ballistic charge transport. However, when electron-electron interactions dominate, a hydrodynamic regime with viscous charge flow emerges (1-13). More stringent conditions eventually yield a quantum-critical Dirac-fluid regime, where electronic heat can flow more efficiently than charge (14-22). Here we observe heat transport in graphene in the diffusive and hydrodynamic regimes, and report a controllable transition to the Dirac-fluid regime at room temperature, using carrier temperature and carrier density as control knobs. We introduce the technique of spatiotemporal thermoelectric microscopy with femtosecond temporal and nanometre spatial resolution, which allows for tracking electronic heat spreading. In the diffusive regime, we find a thermal diffusivity of $\sim$2,000 cm$^2$/s, consistent with charge transport. Remarkably, during the hydrodynamic time window before momentum relaxation, we observe heat spreading corresponding to a giant diffusivity up to 70,000 cm$^2$/Vs, indicative of a Dirac fluid. These results are promising for applications such as nanoscale thermal management.
△ Less
Submitted 28 December, 2020; v1 submitted 10 August, 2020;
originally announced August 2020.
-
Tracking ultrafast hot-electron diffusion in space and time by ultrafast thermo-modulation microscopy
Authors:
Alexander Block,
Matz Liebel,
Renwen Yu,
Marat Spector,
Yonatan Sivan,
F. Javier García de Abajo,
Niek F. van Hulst
Abstract:
The ultrafast response of metals to light is governed by intriguing non-equilibrium dynamics involving the interplay of excited electrons and phonons. The coupling between them gives rise to nonlinear diffusion behavior on ultrashort timescales. Here, we use scanning ultrafast thermo-modulation microscopy to image the spatio-temporal hot-electron diffusion in a thin gold film. By tracking local tr…
▽ More
The ultrafast response of metals to light is governed by intriguing non-equilibrium dynamics involving the interplay of excited electrons and phonons. The coupling between them gives rise to nonlinear diffusion behavior on ultrashort timescales. Here, we use scanning ultrafast thermo-modulation microscopy to image the spatio-temporal hot-electron diffusion in a thin gold film. By tracking local transient reflectivity with 20 nm and 0.25 ps resolution, we reveal two distinct diffusion regimes, consisting of an initial rapid diffusion during the first few picoseconds after optical excitation, followed by about 100-fold slower diffusion at longer times. We simulate the thermo-optical response of the gold film with a comprehensive three-dimensional model, and identify the two regimes as hot-electron and phonon-limited thermal diffusion, respectively.
△ Less
Submitted 27 September, 2018;
originally announced September 2018.
-
Extreme Scale-out SuperMUC Phase 2 - lessons learned
Authors:
Nicolay Hammer,
Ferdinand Jamitzky,
Helmut Satzger,
Momme Allalen,
Alexander Block,
Anupam Karmakar,
Matthias Brehm,
Reinhold Bader,
Luigi Iapichino,
Antonio Ragagnin,
Vasilios Karakasis,
Dieter Kranzlmüller,
Arndt Bode,
Herbert Huber,
Martin Kühn,
Rui Machado,
Daniel Grünewald,
Philipp V. F. Edelmann,
Friedrich K. Röpke,
Markus Wittmann,
Thomas Zeiser,
Gerhard Wellein,
Gerald Mathias,
Magnus Schwörer,
Konstantin Lorenzen
, et al. (14 additional authors not shown)
Abstract:
In spring 2015, the Leibniz Supercomputing Centre (Leibniz-Rechenzentrum, LRZ), installed their new Peta-Scale System SuperMUC Phase2. Selected users were invited for a 28 day extreme scale-out block operation during which they were allowed to use the full system for their applications. The following projects participated in the extreme scale-out workshop: BQCD (Quantum Physics), SeisSol (Geophysi…
▽ More
In spring 2015, the Leibniz Supercomputing Centre (Leibniz-Rechenzentrum, LRZ), installed their new Peta-Scale System SuperMUC Phase2. Selected users were invited for a 28 day extreme scale-out block operation during which they were allowed to use the full system for their applications. The following projects participated in the extreme scale-out workshop: BQCD (Quantum Physics), SeisSol (Geophysics, Seismics), GPI-2/GASPI (Toolkit for HPC), Seven-League Hydro (Astrophysics), ILBDC (Lattice Boltzmann CFD), Iphigenie (Molecular Dynamic), FLASH (Astrophysics), GADGET (Cosmological Dynamics), PSC (Plasma Physics), waLBerla (Lattice Boltzmann CFD), Musubi (Lattice Boltzmann CFD), Vertex3D (Stellar Astrophysics), CIAO (Combustion CFD), and LS1-Mardyn (Material Science). The projects were allowed to use the machine exclusively during the 28 day period, which corresponds to a total of 63.4 million core-hours, of which 43.8 million core-hours were used by the applications, resulting in a utilization of 69%. The top 3 users were using 15.2, 6.4, and 4.7 million core-hours, respectively.
△ Less
Submitted 6 September, 2016;
originally announced September 2016.