-
Nanocryotron ripple counter integrated with a superconducting nanowire single-photon detector for megapixel arrays
Authors:
Matteo Castellani,
Owen Medeiros,
Reed A. Foster,
Alessandro Buzzi,
Marco Colangelo,
Joshua C. Bienfang,
Alessandro Restelli,
Karl K. Berggren
Abstract:
Decreasing the number of cables that bring heat into the cryostat is a critical issue for all cryoelectronic devices. Especially, arrays of superconducting nanowire single-photon detectors (SNSPDs) could require more than $10^6$ readout lines. Performing signal processing operations at low temperatures could be a solution. Nanocryotrons, superconducting nanowire three-terminal devices, are good ca…
▽ More
Decreasing the number of cables that bring heat into the cryostat is a critical issue for all cryoelectronic devices. Especially, arrays of superconducting nanowire single-photon detectors (SNSPDs) could require more than $10^6$ readout lines. Performing signal processing operations at low temperatures could be a solution. Nanocryotrons, superconducting nanowire three-terminal devices, are good candidates for integrating sensing and electronics on the same technological platform as SNSPDs in photon-counting applications. In this work, we demonstrated that it is possible to read out, process, encode, and store the output of SNSPDs using exclusively superconducting nanowires. In particular, we present the design and development of a nanocryotron ripple counter that detects input voltage spikes and converts the number of pulses to an $N$-digit value. The counting base can be tuned from 2 to higher values, enabling higher maximum counts without enlarging the circuit. As a proof-of-principle, we first experimentally demonstrated the building block of the counter, an integer-$N$ frequency divider with $N$ ranging from 2 to 5. Then, we demonstrated photon-counting operations at 405 nm and 1550 nm by coupling an SNSPD with a 2-digit nanocryotron counter partially integrated on-chip. The 2-digit counter could operate in either base 2 or base 3 with a bit error rate lower than $2 \times 10^{-4}$ and a count rate of $10^7\,$s$^{-1}$. We simulated circuit architectures for integrated readout of the counter state, and we evaluated the capabilities of reading out an SNSPD megapixel array that would collect up to $10^{12}$ counts per second. The results of this work, combined with our recent publications on a nanocryotron shift register and logic gates, pave the way for the development of nanocryotron processors, from which multiple superconducting platforms may benefit.
△ Less
Submitted 30 June, 2024; v1 submitted 23 April, 2023;
originally announced April 2023.
-
Impedance-matched differential superconducting nanowire detectors
Authors:
Marco Colangelo,
Boris Korzh,
Jason P. Allmaras,
Andrew D. Beyer,
Andrew S. Mueller,
Ryan M. Briggs,
Bruce Bumble,
Marcus Runyan,
Martin J. Stevens,
Adam N. McCaughan,
Di Zhu,
Stephen Smith,
Wolfgang Becker,
Lautaro Narváez,
Joshua C. Bienfang,
Simone Frasca,
Angel E. Velasco,
Cristián H. Peña,
Edward E. Ramirez,
Alexander B. Walter,
Ekkehart Schmidt,
Emma E. Wollman,
Maria Spiropulu,
Richard Mirin,
Sae Woo Nam
, et al. (2 additional authors not shown)
Abstract:
Superconducting nanowire single-photon detectors (SNSPDs) are the highest performing photon-counting technology in the near-infrared (NIR). Due to delay-line effects, large area SNSPDs typically trade-off timing resolution and detection efficiency. Here, we introduce a detector design based on transmission line engineering and differential readout for device-level signal conditioning, enabling a h…
▽ More
Superconducting nanowire single-photon detectors (SNSPDs) are the highest performing photon-counting technology in the near-infrared (NIR). Due to delay-line effects, large area SNSPDs typically trade-off timing resolution and detection efficiency. Here, we introduce a detector design based on transmission line engineering and differential readout for device-level signal conditioning, enabling a high system detection efficiency and a low detector jitter, simultaneously. To make our differential detectors compatible with single-ended time taggers, we also engineer analog differential-to-single-ended readout electronics, with minimal impact on the system timing resolution. Our niobium nitride differential SNSPDs achieve $47.3\,\% \pm 2.4\,\%$ system detection efficiency and sub-$10\,\mathrm{ps}$ system jitter at $775\,\mathrm{nm}$, while at $1550\,\mathrm{nm}$ they achieve $71.1\,\% \pm 3.7\,\%$ system detection efficiency and $13.1\,\mathrm{ps} \pm 0.4\,\mathrm{ps}$ system jitter. These detectors also achieve sub-100 ps timing response at one one-hundredth maximum level, $30.7\,\mathrm{ps} \pm 0.4\,\mathrm{ps}$ at $775\,\mathrm{nm}$ and $47.6\,\mathrm{ps} \pm 0.4\,\mathrm{ps}$ at $1550\,\mathrm{nm}$, enabling time-correlated single-photon counting with high dynamic range response functions. Furthermore, thanks to the differential impedance-matched design, our detectors exhibit delay-line imaging capabilities and photon-number resolution. The properties and high-performance metrics achieved by our system make it a versatile photon-detection solution for many scientific applications.
△ Less
Submitted 17 August, 2021;
originally announced August 2021.
-
A compact and tunable forward coupler based on high-impedance superconducting nanowires
Authors:
Marco Colangelo,
Di Zhu,
Daniel F. Santavicca,
Brenden A. Butters,
Joshua C. Bienfang,
Karl K. Berggren
Abstract:
Develo** compact, low-dissipation, cryogenic-compatible microwave electronics is essential for scaling up low-temperature quantum computing systems. In this paper, we demonstrate an ultra-compact microwave directional forward coupler based on high-impedance slow-wave superconducting-nanowire transmission lines. The coupling section of the fabricated device has a footprint of…
▽ More
Develo** compact, low-dissipation, cryogenic-compatible microwave electronics is essential for scaling up low-temperature quantum computing systems. In this paper, we demonstrate an ultra-compact microwave directional forward coupler based on high-impedance slow-wave superconducting-nanowire transmission lines. The coupling section of the fabricated device has a footprint of $416\,\mathrm{μm^2}$. At 4.753 GHz, the input signal couples equally to the through port and forward-coupling port (50:50) at $-6.7\,\mathrm{dB}$ with $-13.5\,\mathrm{dB}$ isolation. The coupling ratio can be controlled with DC bias current or temperature by exploiting the dependence of the kinetic inductance on these quantities. The material and fabrication-process are suitable for direct integration with superconducting circuits, providing a practical solution to the signal distribution bottlenecks in develo** large-scale quantum computers.
△ Less
Submitted 23 November, 2020;
originally announced November 2020.
-
Device-independent Randomness Expansion with Entangled Photons
Authors:
Lynden K. Shalm,
Yanbao Zhang,
Joshua C. Bienfang,
Collin Schlager,
Martin J. Stevens,
Michael D. Mazurek,
Carlos Abellán,
Waldimar Amaya,
Morgan W. Mitchell,
Mohammad A. Alhejji,
Honghao Fu,
Joel Ornstein,
Richard P. Mirin,
Sae Woo Nam,
Emanuel Knill
Abstract:
With the growing availability of experimental loophole-free Bell tests, it has become possible to implement a new class of device-independent random number generators whose output can be certified to be uniformly random without requiring a detailed model of the quantum devices used. However, all of these experiments require many input bits in order to certify a small number of output bits, and it…
▽ More
With the growing availability of experimental loophole-free Bell tests, it has become possible to implement a new class of device-independent random number generators whose output can be certified to be uniformly random without requiring a detailed model of the quantum devices used. However, all of these experiments require many input bits in order to certify a small number of output bits, and it is an outstanding challenge to develop a system that generates more randomness than is consumed. Here, we devise a device-independent spot-checking protocol that consumes only uniform bits without requiring any additional bits with a specific bias. Implemented with a photonic loophole-free Bell test, we can produce 24% more certified output bits (1,181,264,237) than consumed input bits (953,301,640). The experiment ran for 91.0 hours, creating randomness at an average rate of 3606 bits/s with a soundness error bounded by $5.7\times 10^{-7}$ in the presence of classical side information. Our system will allow for greater trust in public sources of randomness, such as randomness beacons, and may one day enable high-quality private sources of randomness as the device footprint shrinks.
△ Less
Submitted 20 October, 2021; v1 submitted 23 December, 2019;
originally announced December 2019.
-
Calibration of free-space and fiber-coupled single-photon detectors
Authors:
Thomas Gerrits,
Alan Migdall,
Joshua C. Bienfang,
John Lehman,
Sae Woo Nam,
Jolene Splett,
Igor Vayshenker,
Jack Wang
Abstract:
We measure the detection efficiency of single-photon detectors at wavelengths near 851 nm and 1533.6 nm. We investigate the spatial uniformity of one free-space-coupled single-photon avalanche diode and present a comparison between fusion-spliced and connectorized fiber-coupled single-photon detectors. We find that our expanded relative uncertainty for a single measurement of the detection efficie…
▽ More
We measure the detection efficiency of single-photon detectors at wavelengths near 851 nm and 1533.6 nm. We investigate the spatial uniformity of one free-space-coupled single-photon avalanche diode and present a comparison between fusion-spliced and connectorized fiber-coupled single-photon detectors. We find that our expanded relative uncertainty for a single measurement of the detection efficiency is as low as 0.70 % for fiber-coupled measurements at 1533.6 nm and as high as 1.78 % for our free-space characterization at 851.7 nm. The detection-efficiency determination includes corrections for afterpulsing, dark count, and count-rate effects of the single-photon detector with the detection efficiency interpolated to operation at a specified detected count rate.
△ Less
Submitted 5 June, 2019;
originally announced June 2019.
-
Harnessing high-dimensional hyperentanglement through a biphoton frequency comb
Authors:
Zhenda Xie,
Tian Zhong,
Sajan Shrestha,
XinAn Xu,
Junlin Liang,
Yan-Xiao Gong,
Joshua C. Bienfang,
Alessandro Restelli,
Jeffrey H. Shapiro,
Franco N. C. Wong,
Chee Wei Wong
Abstract:
Quantum entanglement is a fundamental resource for secure information processing and communications, where hyperentanglement or high-dimensional entanglement has been separately proposed towards high data capacity and error resilience. The continuous-variable nature of the energy-time entanglement makes it an ideal candidate for efficient high-dimensional coding with minimal limitations. Here we d…
▽ More
Quantum entanglement is a fundamental resource for secure information processing and communications, where hyperentanglement or high-dimensional entanglement has been separately proposed towards high data capacity and error resilience. The continuous-variable nature of the energy-time entanglement makes it an ideal candidate for efficient high-dimensional coding with minimal limitations. Here we demonstrate the first simultaneous high-dimensional hyperentanglement using a biphoton frequency comb to harness the full potential in both energy and time domain. The long-postulated Hong-Ou-Mandel quantum revival is exhibited, with up to 19 time-bins, 96.5% visibilities. We further witness the high-dimensional energy-time entanglement through Franson revivals, which is observed periodically at integer time-bins, with 97.8% visibility. This qudit state is observed to simultaneously violate the generalized Bell inequality by up to 10.95 deviations while observing recurrent Clauser-Horne-Shimony-Holt S-parameters up to 2.76. Our biphoton frequency comb provides a platform in photon-efficient quantum communications towards the ultimate channel capacity through energy-time-polarization high-dimensional encoding.
△ Less
Submitted 13 June, 2015;
originally announced June 2015.
