-
Towards the reproducible fabrication of conductive ferroelectric domain walls into lithium niobate bulk single crystals
Authors:
Julius Ratzenberger,
Iuliia Kiseleva,
Boris Koppitz,
Elke Beyreuther,
Manuel Zahn,
Joshua Gössel,
Peter A. Hegarty,
Zeeshan H. Amber,
Michael Rüsing,
Lukas M. Eng
Abstract:
Ferroelectric domain walls (DWs) are promising structures for assembling future nano-electronic circuit elements on a larger scale, since reporting domain wall currents of up to 1 mA per single DW. One key requirement hereto is their reproducible manufacturing by gaining preparative control over domain size and domain wall conductivity (DWC). To date, most works on DWC have focused on exploring th…
▽ More
Ferroelectric domain walls (DWs) are promising structures for assembling future nano-electronic circuit elements on a larger scale, since reporting domain wall currents of up to 1 mA per single DW. One key requirement hereto is their reproducible manufacturing by gaining preparative control over domain size and domain wall conductivity (DWC). To date, most works on DWC have focused on exploring the fundamental electrical properties of individual DWs within single shot experiments, with emphasis on quantifying the origins for DWC. Very few reports exist when it comes to compare the DWC properties between two separate DWs, and literally nothing exists where issues of reproducibility in DWC devices have been addressed. To fill this gap while facing the challenge of finding guidelines achieving predictable DWC performance, we report on a procedure that allows us to reproducibly prepare single hexagonal domains of a predefined diameter into uniaxial ferroelectric (FE) lithium niobate (LN) single crystals of 200 and 300 micrometers thickness, respectively. We show that the domain diameter can be controlled with an error of a few percent. As-grown DWs are then subjected to a standard procedure of current-controlled high-voltage DWC enhancement, repetitively reaching a DWC increase of 6 orders of magnitude. While all resulting DWs show significantly enhanced DWC values, subtle features in their individual current-voltage (I-V) characteristics hint towards different 3D shapes into the bulk, with variations probably reflecting local heterogeneities by defects, DW pinning, and surface-near DW inclination, which seem to have a larger impact than expected.
△ Less
Submitted 13 May, 2024;
originally announced May 2024.
-
Comparative study of photo-induced electronic transport along ferroelectric domain walls in lithium niobate single crystals
Authors:
Lili Ding,
Elke Beyreuther,
Boris Koppitz,
Konrad Kempf,
Jianhua Ren,
Wei** Chen,
Michael Rüsing,
Yue Zheng,
Lukas M. Eng
Abstract:
Ferroelectric domain wall conductivity (DWC) is an intriguing functional property, that can be controlled through external stimuli such as electric and mechanical fields. Optical-field control, as a non-invasive flexible handle, has rarely been applied so far, but significantly expands the possibility for both tuning and probing DWC. On the one hand, as known from Second-Harmonic, Raman, and CARS…
▽ More
Ferroelectric domain wall conductivity (DWC) is an intriguing functional property, that can be controlled through external stimuli such as electric and mechanical fields. Optical-field control, as a non-invasive flexible handle, has rarely been applied so far, but significantly expands the possibility for both tuning and probing DWC. On the one hand, as known from Second-Harmonic, Raman, and CARS micro-spectroscopy, the optical in-and-out approach delivers parameters on the DW distribution, the DW inclination, and probes the DW vibrational modes; on the other hand, photons might be applied also to directly generate charge carriers within the DW, hence acting as a functional and spectrally tunable probe to deduce the integral or local absorption properties and bandgaps of conductive DWs. Here, we report on such an optoelectronic approach by investigating the photo-induced DWC (PI-DWC) in DWs of the model system lithium niobate, a material that is well known for hosting conductive DWs. We compare three different crystals containing different numbers of domain walls: (A) none, (B) one, and (C) many conductive DWs. All samples are inspected for their current-voltage (I-V) behavior (i) in darkness, and (ii) for different illumination wavelengths swept from 500 nm down to 310 nm. All samples show their maximum PI-DWC at 310 nm, i.e., at the optical bandgap of lithium niobate; moreover, sample (C) reaches PI-DWCs of several $μ$A. Interestingly, a noticeable PI-DWC is also observed for sub-bandgap illumination, i.e., wavelengths as high as 500 nm, hinting towards the existence and decisive role of electronic in-gap states that contribute to the electronic transport along DWs. Finally, conductive atomic force microscopy (c-AFM) investigations under illumination proved that the PI-DWC is confined to the DW area, and does not originate from photo-induced bulk conductivity.
△ Less
Submitted 27 February, 2024;
originally announced February 2024.
-
Hall mobilities and sheet carrier densities in a single LiNbO$_3$ conductive ferroelectric domain wall
Authors:
Henrik Beccard,
Elke Beyreuther,
Benjamin Kirbus,
Samuel D. Seddon,
Michael Rüsing,
Lukas M. Eng
Abstract:
For the last decade, conductive domain walls (CDWs) in single crystals of the uniaxial model ferroelectric lithium niobate (LiNbO$_3$, LNO) have shown to reach resistances more than 10 orders of magnitude lower as compared to the surrounding bulk, with charge carriers being firmly confined to sheets of a few nanometers in width. LNO thus currently witnesses an increased attention since bearing the…
▽ More
For the last decade, conductive domain walls (CDWs) in single crystals of the uniaxial model ferroelectric lithium niobate (LiNbO$_3$, LNO) have shown to reach resistances more than 10 orders of magnitude lower as compared to the surrounding bulk, with charge carriers being firmly confined to sheets of a few nanometers in width. LNO thus currently witnesses an increased attention since bearing the potential for variably designing room-temperature nanoelectronic circuits and devices based on such CDWs. In this context, the reliable determination of the fundamental transport parameters of LNO CDWs, in particular the 2D charge carrier density $n_{2D}$ and the Hall mobility $μ_{H}$ of the majority carriers, are of highest interest. In this contribution, we present and apply a robust and easy-to-prepare Hall-effect measurement setup by adapting the standard 4-probe van-der-Pauw method to contact a single, hexagonally-shaped domain wall that fully penetrates the 200-$μ$m-thick LNO bulk single crystal. We then determine $n_{2D}$ and $μ_{H}$ for a set of external magnetic fields $B$ and prove the expected cosine-like angular dependence of the Hall voltage. Lastly, we present photo-Hall measurements of one and the same DW, by determining the impact of super-bandgap illumination on the 2D charge carrier density $n_{2D}$.
△ Less
Submitted 6 November, 2023; v1 submitted 31 July, 2023;
originally announced August 2023.
-
R2D2 -- An equivalent-circuit model that quantitatively describes domain wall conductivity in ferroelectric LiNbO$_3$
Authors:
Manuel Zahn,
Elke Beyreuther,
Iuliia Kiseleva,
Ahmed Samir Lotfy,
Conor J. McCluskey,
Jesi R. Maguire,
Ahmet Suna,
Michael Rüsing,
J. Marty Gregg,
Lukas M. Eng
Abstract:
Ferroelectric domain wall (DW) conductivity (DWC) can be attributed to two separate mechanisms: (a) the injection/ejection of charge carriers across the Schottky barrier formed at the (metal-) electrode-DW junction and (b) the transport of those charge carriers along the DW. Current-voltage (IU) characteristics, recorded at variable temperatures from LiNbO$_3$ (LNO) DWs, are clearly able to differ…
▽ More
Ferroelectric domain wall (DW) conductivity (DWC) can be attributed to two separate mechanisms: (a) the injection/ejection of charge carriers across the Schottky barrier formed at the (metal-) electrode-DW junction and (b) the transport of those charge carriers along the DW. Current-voltage (IU) characteristics, recorded at variable temperatures from LiNbO$_3$ (LNO) DWs, are clearly able to differentiate between these two contributions. Practically, they allow us here to directly quantify the physical parameters relevant for the two mechanisms (a) and (b) mentioned above. These are, e.g., the resistance of the DW, the saturation current, the ideality factor, and the Schottky barrier height of the electrode/DW junction. Furthermore, the activation energies needed to initiate the thermally-activated electronic transport along the DWs, can be extracted. In addition, we show that electronic transport along LiNbO$_3$ DWs can be elegantly viewed and interpreted in an adapted semiconductor picture based on a double-diode/double-resistor equivalent circuit model, the R2D2 model. Finally, our R2D2 model was checked for its universality by fitting the DWC data not only to z-cut LNO bulk DWs, but equally to z-cut thin-film LNO DWs, and DWC from x-cut DWs as reported in literature.
△ Less
Submitted 19 November, 2023; v1 submitted 19 July, 2023;
originally announced July 2023.
-
Large Hall electron mobilities in head-to-head BaTiO$_3$-domain walls
Authors:
Henrik Beccard,
Benjamin Kirbus,
Elke Beyreuther,
Michael Rüsing,
Petr Bednyakov,
Jirka Hlinka,
Lukas M. Eng
Abstract:
Strongly charged head-to-head (H2H) domain walls (DWs) that are purposely engineered along the [110] crystallographic orientation into ferroelectric BaTiO$_3$ single crystals have been proposed as novel 2-dimensional electron gases (2DEGs) due to their significant domain wall conductivity (DWC). Here, we quantify these 2DEG properties through dedicated Hall-transport measurements in van-der-Pauw 4…
▽ More
Strongly charged head-to-head (H2H) domain walls (DWs) that are purposely engineered along the [110] crystallographic orientation into ferroelectric BaTiO$_3$ single crystals have been proposed as novel 2-dimensional electron gases (2DEGs) due to their significant domain wall conductivity (DWC). Here, we quantify these 2DEG properties through dedicated Hall-transport measurements in van-der-Pauw 4-point geometry at room temperature, finding the electron mobility to reach around 400~cm$^2$(Vs)$^{-1}$, while the 2-dimensional charge density amounts to ~7$\times$10$^3$cm$^{-2}$. We underline the necessity to take account of thermal and geometrical-misalignment offset voltages by evaluating the Hall resistance under magnetic-field sweeps, since otherwise dramatic errors of several hundred percent in the derived mobility and charge density values can occur. Apart from the specific characterization of the conducting BaTiO$_3$ DW, we propose the method as an easy and fast way to quantitatively characterize ferroic conducting DWs, complementary to previously proposed scanning-probe-based Hall-potential analyses.
△ Less
Submitted 24 April, 2022;
originally announced April 2022.
-
Does FLASH deplete Oxygen? Experimental Evaluation for Photons, Protons and Carbon Ions
Authors:
Jeannette Jansen,
Jan Knoll,
Elke Beyreuther,
Jörg Pawelke,
Raphael Skuza,
Rachel Hanley,
Stephan Brons,
Francesca Pagliari,
Joao Seco
Abstract:
Purpose: To investigate experimentally, if FLASH irradiation depletes oxygen within water for different radiation types such as photons, protons and carbon ions.
Methods: This study presents measurements of the oxygen consumption in sealed, 3D printed water phantoms during irradiation with X-rays, protons and carbon ions at varying dose rates up to 340 Gy/s. The oxygen measurement was performed…
▽ More
Purpose: To investigate experimentally, if FLASH irradiation depletes oxygen within water for different radiation types such as photons, protons and carbon ions.
Methods: This study presents measurements of the oxygen consumption in sealed, 3D printed water phantoms during irradiation with X-rays, protons and carbon ions at varying dose rates up to 340 Gy/s. The oxygen measurement was performed using an optical sensor allowing for non-invasive measurements.
Results: Oxygen consumption in water only depends on dose, dose rate and linear energy transfer (LET) of the irradiation. The total amount of oxygen depleted per 10 Gy was found to be 0.04 - 0.18 % atm for 225 kV photons, 0.04 - 0.25 % atm for 224 MeV protons and 0.09 - 0.17 % atm for carbon ions. consumption depends on dose rate by an inverse power law and saturates for higher dose rates because of self-interactions of radicals. Higher dose rates yield lower oxygen consumption. No total depletion of oxygen was found for clinical doses.
Conclusions: FLASH irradiation does consume oxygen, but not enough to deplete all the oxygen present. For higher dose rates, less oxygen was consumed than at standard radiotherapy dose rates. No total depletion was found for any of the analyzed radiation types for 10 Gy dose delivery using FLASH.
△ Less
Submitted 1 March, 2021; v1 submitted 25 February, 2021;
originally announced February 2021.
-
Optical-Field Driven Charge-Transfer Modulations near Composite Nanostructures
Authors:
Kwang ** Lee,
Elke Beyreuther,
Sohail A. Jalil,
Sang Jun Kim,
Lukas Eng,
Chunlei Guo,
Pascal Andre
Abstract:
Optical activation of material properties illustrates the potentials held by tuning light-matter interactions with impacts ranging from basic science to technological applications. Here, we demonstrate for the first time that composite nanostructures providing nonlocal environments can be engineered to optically trigger photoinduced charge transfer dynamic (CTD) modulations in the solid state. The…
▽ More
Optical activation of material properties illustrates the potentials held by tuning light-matter interactions with impacts ranging from basic science to technological applications. Here, we demonstrate for the first time that composite nanostructures providing nonlocal environments can be engineered to optically trigger photoinduced charge transfer dynamic (CTD) modulations in the solid state. The nanostructures herein explored lead to unprecedented out-of-phase behaviour between charge separation and recombination dynamics, along with linear CTD variations with the optical-field amplitude. Using transient absorption spectroscopy, up to 270 % increase in charge separation rate is obtained in organic semiconductor thin films. We provide evidences that composite nanostructures allow for surface photovoltages to be created, which kinetics vary with the composite architecture and last beyond optical pulse temporal characteristics. Furthermore, by generalizing Marcus theory framework, we explain why CTD modulations can only be unveiled when optic field effects are enhanced by nonlocal image dipole interactions. Demonstrating that composite nanostructures can be designed to use optical fields as CTD remote actuators opens the path for their use in practical and original applications ranging from photochemistry to optoelectronics.
△ Less
Submitted 16 November, 2020; v1 submitted 23 March, 2020;
originally announced March 2020.
-
Spectral and spatial sha** of laser-driven proton beams using a pulsed high-field magnet beamline
Authors:
Florian-Emanuel Brack,
Florian Kroll,
Lennart Gaus,
Constantin Bernert,
Elke Beyreuther,
Thomas E. Cowan,
Leonhard Karsch,
Stephan Kraft,
Leoni A. Kunz-Schughart,
Elisabeth Lessmann,
Josefine Metzkes-Ng,
Lieselotte Obst-Hübl,
Jörg Pawelke,
Martin Rehwald,
Hans-Peter Schlenvoigt,
Ulrich Schramm,
Manfred Sobiella,
Emília Rita Szabó,
Tim Ziegler,
Karl Zeil
Abstract:
Intense laser-driven proton pulses, inherently broadband and highly divergent, pose a challenge to established beamline concepts on the path to application-adapted irradiation field formation, particularly for 3D. Here we experimentally show the successful implementation of a highly efficient (50% transmission) and tuneable dual pulsed solenoid setup to generate a homogeneous (8.5% uniformity late…
▽ More
Intense laser-driven proton pulses, inherently broadband and highly divergent, pose a challenge to established beamline concepts on the path to application-adapted irradiation field formation, particularly for 3D. Here we experimentally show the successful implementation of a highly efficient (50% transmission) and tuneable dual pulsed solenoid setup to generate a homogeneous (8.5% uniformity laterally and in depth) volumetric dose distribution (cylindrical volume of 5 mm diameter and depth) at a single pulse dose of 0.7 Gy via multi-energy slice selection from the broad input spectrum. The experiments have been conducted at the Petawatt beam of the Dresden Laser Acceleration Source Draco and were aided by a predictive simulation model verified by proton transport studies. With the characterised beamline we investigated manipulation and matching of lateral and depth dose profiles to various desired applications and targets. Using a specifically adapted dose profile, we successfully performed first proof-of-concept laser-driven proton irradiation studies of volumetric in-vivo normal tissue (zebrafish embryos) and in-vitro tumour tissue (SAS spheroids) samples.
△ Less
Submitted 6 April, 2020; v1 submitted 18 October, 2019;
originally announced October 2019.
