-
Projected background and sensitivity of AMoRE-II
Authors:
A. Agrawal,
V. V. Alenkov,
P. Aryal,
J. Beyer,
B. Bhandari,
R. S. Boiko,
K. Boonin,
O. Buzanov,
C. R. Byeon,
N. Chanthima,
M. K. Cheoun,
J. S. Choe,
Seonho Choi,
S. Choudhury,
J. S. Chung,
F. A. Danevich,
M. Djamal,
D. Drung,
C. Enss,
A. Fleischmann,
A. M. Gangapshev,
L. Gastaldo,
Y. M. Gavrilyuk,
A. M. Gezhaev,
O. Gileva
, et al. (81 additional authors not shown)
Abstract:
AMoRE-II aims to search for neutrinoless double beta decay with an array of 423 Li$_2$$^{100}$MoO$_4$ crystals operating in the cryogenic system as the main phase of the Advanced Molybdenum-based Rare process Experiment (AMoRE). AMoRE has been planned to operate in three phases: AMoRE-pilot, AMoRE-I, and AMoRE-II. AMoRE-II is currently being installed at the Yemi Underground Laboratory, located ap…
▽ More
AMoRE-II aims to search for neutrinoless double beta decay with an array of 423 Li$_2$$^{100}$MoO$_4$ crystals operating in the cryogenic system as the main phase of the Advanced Molybdenum-based Rare process Experiment (AMoRE). AMoRE has been planned to operate in three phases: AMoRE-pilot, AMoRE-I, and AMoRE-II. AMoRE-II is currently being installed at the Yemi Underground Laboratory, located approximately 1000 meters deep in Jeongseon, Korea. The goal of AMoRE-II is to reach up to $T^{0νββ}_{1/2}$ $\sim$ 6 $\times$ 10$^{26}$ years, corresponding to an effective Majorana mass of 15 - 29 meV, covering all the inverted mass hierarchy regions. To achieve this, the background level of the experimental configurations and possible background sources of gamma and beta events should be well understood. We have intensively performed Monte Carlo simulations using the GEANT4 toolkit in all the experimental configurations with potential sources. We report the estimated background level that meets the 10$^{-4}$counts/(keV$\cdot$kg$\cdot$yr) requirement for AMoRE-II in the region of interest (ROI) and show the projected half-life sensitivity based on the simulation study.
△ Less
Submitted 13 June, 2024;
originally announced June 2024.
-
Wide-range resistivity characterization of semiconductors with terahertz time-domain spectroscopy
Authors:
Joshua Hennig,
Jens Klier,
Stefan Duran,
Kuei-Shen Hsu,
Jan Beyer,
Christian Röder,
Franziska C. Beyer,
Nadine Schüler,
Nico Vieweg,
Katja Dutzi,
Georg von Freymann,
Daniel Molter
Abstract:
Resistivity is one of the most important characteristics in the semiconductor industry. The most common way to measure resistivity is the four-point probe method, which requires physical contact with the material under test. Terahertz time domain spectroscopy, a fast and non-destructive measurement method, is already well established in the characterization of dielectrics. In this work, we demonst…
▽ More
Resistivity is one of the most important characteristics in the semiconductor industry. The most common way to measure resistivity is the four-point probe method, which requires physical contact with the material under test. Terahertz time domain spectroscopy, a fast and non-destructive measurement method, is already well established in the characterization of dielectrics. In this work, we demonstrate the potential of two Drude model-based approaches to extract resistivity values from terahertz time-domain spectroscopy measurements of silicon in a wide range from about 10$^{-3}$ $Ω$cm to 10$^{2}$ $Ω$cm. One method is an analytical approach and the other is an optimization approach. Four-point probe measurements are used as a reference. In addition, the spatial resistivity distribution is imaged by X-Y scanning of the samples to detect inhomogeneities in the do** distribution.
△ Less
Submitted 23 January, 2024;
originally announced January 2024.
-
Magnetic microcalorimeters for primary activity standardization within the EMPIR project PrimA-LTD
Authors:
Michael Müller,
Matias Rodrigues,
Jörn Beyer,
Martin Loidl,
Sebastian Kempf
Abstract:
The precision of existing decay data of radionuclides for activity determination is often a limitation for actual applications in science, society, and industry. For this reason, the EMPIR project PrimA-LTD aims to introduce an advanced primary activity standardization technique that is based on magnetic microcalorimeters (MMCs) and that will offer very low energy threshold of few eV and a decay s…
▽ More
The precision of existing decay data of radionuclides for activity determination is often a limitation for actual applications in science, society, and industry. For this reason, the EMPIR project PrimA-LTD aims to introduce an advanced primary activity standardization technique that is based on magnetic microcalorimeters (MMCs) and that will offer very low energy threshold of few eV and a decay scheme independent detection efficiency close to 100%. As a proof of concept, we developed two MMC-based detector types in order to standardize an $α$-decaying, a $β$-decaying and an electron capture decaying isotope. One detector type aims to introduce a reusable detector setup, while the other aims to provide highly accurate decay spectra by high resolution measurements with high statistics. We present the designs, fabrication status and first characterization measurements of both detectors types and outline next steps.
△ Less
Submitted 15 December, 2023; v1 submitted 26 October, 2023;
originally announced October 2023.
-
High precision measurement of the $^{99}$Tc $β$ spectrum
Authors:
Michael Paulsen,
Philipp Ranitzsch,
Martin Loidl,
Matias Rodrigues,
Karsten Kossert,
Xavier Mougeot,
Abilasha Singh,
Sylvain Leblond,
Jörn Beyer,
Lina Bockhorn,
Christian Enss,
Mathias Wegner,
Sebastian Kempf,
Ole Nähle
Abstract:
Highly precise measurements of the $^{99}$Tc beta spectrum were performed in two laboratories using metallic magnetic calorimeters. Independent sample preparations, evaluation methods and analyses yield consistent results and the spectrum could be measured down to less than 1 keV. Consistent beta spectra were also obtained via cross-evaluations of the experimental data sets. An additional independ…
▽ More
Highly precise measurements of the $^{99}$Tc beta spectrum were performed in two laboratories using metallic magnetic calorimeters. Independent sample preparations, evaluation methods and analyses yield consistent results and the spectrum could be measured down to less than 1 keV. Consistent beta spectra were also obtained via cross-evaluations of the experimental data sets. An additional independent measurement with silicon detectors in a $4π$ configuration confirms the spectrum shape above 25 keV. Detailed theoretical calculations were performed including nuclear structure and atomic effects. The spectrum shape was found to be sensitive to the effective value of the axial-vector coupling constant. Combining measurements and predictions, we extracted $Q_β=$295.82(16) keV and $g_A^{\text{eff}} = 1.530 (83)$. Furthermore, we derived the mean energy of the beta spectrum $\overline{E}_β$=98.45(20) keV, $\log f = -0.47660 (22)$ and $\log ft = 12.3478 (23)$.
△ Less
Submitted 4 October, 2023; v1 submitted 25 September, 2023;
originally announced September 2023.
-
Satellite design optimization for differential lift and drag applications
Authors:
C. Marianowski,
C. Traub,
M. Pfeiffer,
J. Beyer,
S. Fasoulas
Abstract:
Utilizing differential atmospheric forces in the Very Low Earth Orbits (VLEO) regime for the control of the relative motion within a satellite formation is a promising option as any thrusting device has tremendous effects on the mission capacity due to the limited weight and size restrictions of small satellites. One possible approach to increase the available control forces is to reduce the mass…
▽ More
Utilizing differential atmospheric forces in the Very Low Earth Orbits (VLEO) regime for the control of the relative motion within a satellite formation is a promising option as any thrusting device has tremendous effects on the mission capacity due to the limited weight and size restrictions of small satellites. One possible approach to increase the available control forces is to reduce the mass of the respective satellites as well as to increase the available surface area. However, satellites of these characteristics suffer from rapid orbital decay and consequently have a reduced service lifetime. Therefore, achieving higher control forces is in contradiction to achieving a minimum orbital decay of the satellites, which currently represents one of the biggest challenges in the VLEO regime. In this work, the geometry of a given reference satellite, a 3UCubeSat, is optimized under the consideration of different surface material properties for differential lift and drag control applications while simultaneously ensuring a sustained VLEO operation. Notably, not only the consideration of sustainability but also the optimization with regard to differential lift is new in literature. It was shown that the advantageous geometries strongly depend on the type of gas-surface interaction and thus, two different final designs, one for each extreme type, are presented. In both cases, improvements in all relevant parameters could be achieved solely via geometry adaptions.
△ Less
Submitted 29 March, 2023;
originally announced March 2023.
-
SQUID current sensors with an integrated thermally actuated input current limiter
Authors:
Rainer Körber,
Patryk Krzysteczko,
Monique Klemm,
Tianhao Liu,
Jan-Hendrik Storm,
Jörn Beyer
Abstract:
The development of SQUID current sensors with a thermally actuated input current limiter (TCL) integrated into the input circuit of the sensor is presented. The TCL is based on an unshunted Josephson Junction (JJ) series array, around which meanders a galvanically isolated, but tightly, thermally coupled, resistive heater element. By applying a current to the heater, the JJ critical currents can b…
▽ More
The development of SQUID current sensors with a thermally actuated input current limiter (TCL) integrated into the input circuit of the sensor is presented. The TCL is based on an unshunted Josephson Junction (JJ) series array, around which meanders a galvanically isolated, but tightly, thermally coupled, resistive heater element. By applying a current to the heater, the JJ critical currents can be reduced or completely suppressed, while the other on-chip SQUID circuit elements remain unaffected. The functional parameters of the TCL are determined by direct transport measurements and by static and dynamic flux coupling tests via the input circuit. In liquid Helium, a heater power, which reliably suppresses the critical current of the JJ array to zero, of $\sim$1.5 mW was needed, with the TCL normal state resistance being at 500 $Ω$. In this configuration, typical TCL switching times below 10 $μ$s were observed in the direct transport measurements.
The TCL can be used to temporarily or even permanently disable malfunctioning channels in multichannel SQUID magnetometer systems, when feedback into their otherwise superconducting input circuits is not possible. In doing so, significant signal distortions in neighbouring channels from screening currents in these input circuits are avoided. Furthermore, by completely suppressing and restoring the TCL critical current, dc offset currents in the superconducting input circuits can be prevented. This is relevant, for instance, in SQUID-based spin precession experiments on hyperpolarized noble gases, in which even dc currents of a few $μ$A in the input circuit can lead to significant magnetic field distortions in the adjacent sample region contributing to the transverse spin-spin relaxation rate $1/T_{2}$
△ Less
Submitted 27 February, 2023;
originally announced February 2023.
-
Spatially modulated superconductivity in the Kagome Hubbard model
Authors:
Tilman Schwemmer,
Hendrik Hohmann,
Matteo Dürrnagel,
Janik Potten,
Jacob Beyer,
Stephan Rachel,
Yi-Ming Wu,
Srinivas Raghu,
Tobias Müller,
Werner Hanke,
Ronny Thomale
Abstract:
We identify a superconducting order featuring spatial pair modulations on the kagome lattice subject to onsite Hubbard U and nearest neighbor V interactions. Within our functional renormalization group analysis, this state appears with a concomitant d-wave superconducting (SC) instability at zero lattice momentum, where it distinguishes itself through intra-unit cell modulations of the pairing fun…
▽ More
We identify a superconducting order featuring spatial pair modulations on the kagome lattice subject to onsite Hubbard U and nearest neighbor V interactions. Within our functional renormalization group analysis, this state appears with a concomitant d-wave superconducting (SC) instability at zero lattice momentum, where it distinguishes itself through intra-unit cell modulations of the pairing function thus breaking the discrete space group symmetry. The relative weight of the sublattice modulated superconductor (SMS) and d-wave SC is influenced by the absolute interaction strength and coupling ratio V /U . Parametrically adjacent to this domain at weak coupling, we find an intra-unit cell modulated vestigial charge density wave and an s-wave SC instability. Our study provides a microscopic setting and thorough description of this novel SMS arising within a translation symmetry broken background.
△ Less
Submitted 1 March, 2024; v1 submitted 16 February, 2023;
originally announced February 2023.
-
An ultra-low field SQUID magnetometer for measuring antiferromagnetic and weakly remanent magnetic materials at low temperatures
Authors:
Michael Paulsen,
Julian Lindner,
Bastian Klemke,
Jörn Beyer,
Michael Fechner,
Dennis Meier,
Klaus Kiefer
Abstract:
A novel setup for the measurement of magnetic fields external to certain antiferromagnets and generally weakly remanent magnetic materials is presented. The setup features a highly sensitive Super Conducting Quantum Interference Device (SQUID) magnetometer with a magnetic field resolution of approx. 10 fT, non-electric thermalization of the sample space for a temperature range of 1.5 - 65 K with a…
▽ More
A novel setup for the measurement of magnetic fields external to certain antiferromagnets and generally weakly remanent magnetic materials is presented. The setup features a highly sensitive Super Conducting Quantum Interference Device (SQUID) magnetometer with a magnetic field resolution of approx. 10 fT, non-electric thermalization of the sample space for a temperature range of 1.5 - 65 K with a non-electric sample movement drive and optical position encoding. To minimize magnetic susceptibility effects, the setup components are degaussed and realized with plastic materials in sample proximity. Running the setup in magnetically shielded rooms allows for a well-defined ultra low magnetic background field well below 150 nT in situ. The setup enables studies of inherently weak magnetic materials which cannot be measured with high field susceptibility setups, optical methods or neutron scattering techniques, giving new opportunities for the research on e.g. spin-spiral multiferroics, skyrmion materials and spin ices.
△ Less
Submitted 23 November, 2022;
originally announced November 2022.
-
The International Linear Collider: Report to Snowmass 2021
Authors:
Alexander Aryshev,
Ties Behnke,
Mikael Berggren,
James Brau,
Nathaniel Craig,
Ayres Freitas,
Frank Gaede,
Spencer Gessner,
Stefania Gori,
Christophe Grojean,
Sven Heinemeyer,
Daniel Jeans,
Katja Kruger,
Benno List,
Jenny List,
Zhen Liu,
Shinichiro Michizono,
David W. Miller,
Ian Moult,
Hitoshi Murayama,
Tatsuya Nakada,
Emilio Nanni,
Mihoko Nojiri,
Hasan Padamsee,
Maxim Perelstein
, et al. (487 additional authors not shown)
Abstract:
The International Linear Collider (ILC) is on the table now as a new global energy-frontier accelerator laboratory taking data in the 2030s. The ILC addresses key questions for our current understanding of particle physics. It is based on a proven accelerator technology. Its experiments will challenge the Standard Model of particle physics and will provide a new window to look beyond it. This docu…
▽ More
The International Linear Collider (ILC) is on the table now as a new global energy-frontier accelerator laboratory taking data in the 2030s. The ILC addresses key questions for our current understanding of particle physics. It is based on a proven accelerator technology. Its experiments will challenge the Standard Model of particle physics and will provide a new window to look beyond it. This document brings the story of the ILC up to date, emphasizing its strong physics motivation, its readiness for construction, and the opportunity it presents to the US and the global particle physics community.
△ Less
Submitted 16 January, 2023; v1 submitted 14 March, 2022;
originally announced March 2022.
-
Optimisation of VLEO Satellite Geometries for Drag Minimisation and Lifetime Extension
Authors:
Franziska Hild,
Constantin Traub,
Marcel Pfeiffer,
Julian Beyer,
Stefanos Fasoulas
Abstract:
The utilisation of the Very Low Earth Orbit (VLEO) region offers significant application specific, technological, operational, and cost benefits. However, attaining sustained and economically viable VLEO flight is challenging, primarily due to the significant, barely predictable and dynamically changing drag caused by the residual atmosphere, which leads to a rapid deterioration of any spacecraft'…
▽ More
The utilisation of the Very Low Earth Orbit (VLEO) region offers significant application specific, technological, operational, and cost benefits. However, attaining sustained and economically viable VLEO flight is challenging, primarily due to the significant, barely predictable and dynamically changing drag caused by the residual atmosphere, which leads to a rapid deterioration of any spacecraft's orbit unless mitigated by a combination of active and passive techniques. This article addresses one passive method by optimising satellite shapes in order to achieve a minimisation of the atmospheric drag force and thus extension of operational lifetime. Contrary to previous investigations in the field, a constant internal volume is maintained to account for the placement of satellite instruments and payload inside the structure. Moreover, the satellite geometry is not varied heuristically but optimised via a numerical 2D profile optimisation specifically developed for this purpose. From the resulting optimal satellite profiles, 3D satellite bodies are derived, which are then verified via the Direct Simulation Monte Carlo method within the open-source particle code PICLas. In addition, rather unconventional designs, i.e. ring geometries, which are based on the assumption of fully specular particle reflections, are proposed and assessed. The optimised satellite geometries offer pure passive lifetime extensions of up to 46 $\%$ compared to a GOCE like reference body, while the above-mentioned ring geometries achieve passive lifetime extensions of more than 3000 $\%$. Finally, the article presents design recommendations for VLEO satellites in dependence of different surface properties.
△ Less
Submitted 23 February, 2022;
originally announced February 2022.
-
Alpha backgrounds in the AMoRE-Pilot experiment
Authors:
V. Alenkov,
H. W. Bae,
J. Beyer,
R. S. Boiko,
K. Boonin,
O. Buzanov,
N. Chanthima,
M. K. Cheoun,
S. H. Choi,
F. A. Danevich,
M. Djamal,
D. Drung,
C. Enss,
A. Fleischmann,
A. Gangapshev,
L. Gastaldo,
Yu. M. Gavriljuk,
A. Gezhaev,
V. D. Grigoryeva,
V. Gurentsov,
D. H. Ha,
C. Ha,
E. J. Ha,
I. Hahn,
E. J. Jeon
, et al. (81 additional authors not shown)
Abstract:
The Advanced Mo-based Rare process Experiment (AMoRE)-Pilot experiment is an initial phase of the AMoRE search for neutrinoless double beta decay of $^{100}$Mo, with the purpose of investigating the level and sources of backgrounds. Searches for neutrinoless double beta decay generally require ultimately low backgrounds. Surface $α$ decays on the crystals themselves or nearby materials can deposit…
▽ More
The Advanced Mo-based Rare process Experiment (AMoRE)-Pilot experiment is an initial phase of the AMoRE search for neutrinoless double beta decay of $^{100}$Mo, with the purpose of investigating the level and sources of backgrounds. Searches for neutrinoless double beta decay generally require ultimately low backgrounds. Surface $α$ decays on the crystals themselves or nearby materials can deposit a continuum of energies that can be as high as the $Q$-value of the decay itself and may fall in the region of interest (ROI). To understand these background events, we studied backgrounds from radioactive contaminations internal to and on the surface of the crystals or nearby materials with Geant4-based Monte Carlo simulations. In this study, we report on the measured $α$ energy spectra fitted with the corresponding simulated spectra for six crystal detectors, where sources of background contributions could be identified through high energy $α$ peaks and continuum parts in the energy spectrum for both internal and surface contaminations. We determine the low-energy contributions from internal and surface $α$ contaminations by extrapolating from the $α$ background fitting model.
△ Less
Submitted 5 December, 2022; v1 submitted 16 July, 2021;
originally announced July 2021.
-
First Results from the AMoRE-Pilot neutrinoless double beta decay experiment
Authors:
V. Alenkov,
H. W. Bae,
J. Beyer,
R. S. Boiko,
K. Boonin,
O. Buzanov,
N. Chanthima,
M. K. Cheoun,
D. M. Chernyak,
J. S. Choe,
S. Choi,
F. A. Danevich,
M. Djamal,
D. Drung,
C. Enss,
A. Fleischmann,
A. M. Gangapshev,
L. Gastaldo,
Yu. M. Gavriljuk,
A. M. Gezhaev,
V. D. Grigoryeva,
V. I. Gurentsov,
O. Gylova,
C. Ha,
D. H. Ha
, et al. (84 additional authors not shown)
Abstract:
The Advanced Molybdenum-based Rare process Experiment (AMoRE) aims to search for neutrinoless double beta decay (0$νββ$) of $^{100}$Mo with $\sim$100 kg of $^{100}$Mo-enriched molybdenum embedded in cryogenic detectors with a dual heat and light readout. At the current, pilot stage of the AMoRE project we employ six calcium molybdate crystals with a total mass of 1.9 kg, produced from $^{48}$Ca-de…
▽ More
The Advanced Molybdenum-based Rare process Experiment (AMoRE) aims to search for neutrinoless double beta decay (0$νββ$) of $^{100}$Mo with $\sim$100 kg of $^{100}$Mo-enriched molybdenum embedded in cryogenic detectors with a dual heat and light readout. At the current, pilot stage of the AMoRE project we employ six calcium molybdate crystals with a total mass of 1.9 kg, produced from $^{48}$Ca-depleted calcium and $^{100}$Mo-enriched molybdenum ($^{48\textrm{depl}}$Ca$^{100}$MoO$_4$). The simultaneous detection of heat(phonon) and scintillation (photon) signals is realized with high resolution metallic magnetic calorimeter sensors that operate at milli-Kelvin temperatures. This stage of the project is carried out in the Yangyang underground laboratory at a depth of 700 m. We report first results from the AMoRE-Pilot $0νββ$ search with a 111 kg$\cdot$d live exposure of $^{48\textrm{depl}}$Ca$^{100}$MoO$_4$ crystals. No evidence for $0νββ$ decay of $^{100}$Mo is found, and a upper limit is set for the half-life of 0$νββ$ of $^{100}$Mo of $T^{0ν}_{1/2} > 9.5\times10^{22}$ y at 90% C.L.. This limit corresponds to an effective Majorana neutrino mass limit in the range $\langle m_{ββ}\rangle\le(1.2-2.1)$ eV.
△ Less
Submitted 7 May, 2019; v1 submitted 22 March, 2019;
originally announced March 2019.
-
TCAD simulations of pixel sensors for the ATLAS ITk upgrade and performance of annealed planar pixel modules
Authors:
Julien-Christopher Beyer,
Alessandro La Rosa,
Anna Macchiolo,
Richard Nisius,
Natascha Savic,
Reem Taibah
Abstract:
For the high luminosity phase of the Large Hadron Collider to start operation around 2026, a major upgrade of the ATLAS Inner Tracker (ITk) is in preparation. Thanks to their low power dissipation and high charge-collection efficiency after irradiation, thin planar pixel modules are the baseline option to instrument all, except for the innermost layer of the pixel detector. To optimise the sensor…
▽ More
For the high luminosity phase of the Large Hadron Collider to start operation around 2026, a major upgrade of the ATLAS Inner Tracker (ITk) is in preparation. Thanks to their low power dissipation and high charge-collection efficiency after irradiation, thin planar pixel modules are the baseline option to instrument all, except for the innermost layer of the pixel detector. To optimise the sensor layout for a pixel cell size of $50\times50\,μm^2$, TCAD simulations are being performed. Charge-collection efficiency, electronic noise and electrical-field properties are investigated. A radiation-damage model is employed in TCAD simulations to estimate the performance before- and after irradiation. The impact of storage time at room temperature for the ITk pixel detector during maintenance periods are estimated using sensors irradiated up to a fluence of 5$\times10^{15}\,$n$_\text{eq}$/cm$^2$. Pixel sensors of $100-150\,μm$ thickness, interconnected to FE-I4 read-out chips with pixel dimensions of $50\times250\,μm^2$, are characterised using the testbeam facilities at the CERN-SPS and DESY. The charge-collection and hit efficiencies are compared before and after annealing at room temperature for up to one year.
△ Less
Submitted 24 October, 2018;
originally announced October 2018.
-
Characterisation of novel thin n-in-p planar pixel modules for the ATLAS Inner Tracker upgrade
Authors:
Julien-Christopher Beyer,
Alessandro La Rosa,
Anna Macchiolo,
Natascha Savic,
Reem Taibah
Abstract:
In view of the high luminosity phase of the LHC (HL-LHC) to start operation around 2026, a major upgrade of the tracker system for the ATLAS experiment is in preparation. The expected neutron equivalent fluence of up to 2.4 * 1e16 1 MeV neq./cm2 at the innermost layer of the pixel detector poses the most severe challenge. Thanks to their low material budget and high charge collection efficiency af…
▽ More
In view of the high luminosity phase of the LHC (HL-LHC) to start operation around 2026, a major upgrade of the tracker system for the ATLAS experiment is in preparation. The expected neutron equivalent fluence of up to 2.4 * 1e16 1 MeV neq./cm2 at the innermost layer of the pixel detector poses the most severe challenge. Thanks to their low material budget and high charge collection efficiency after irradiation, modules made of thin planar pixel sensors are promising candidates to instrument these layers. To optimise the sensor layout for the decreased pixel cell size of 50 * 50 μm2, TCAD device simulations are being performed to investigate the charge collection efficiency before and after irradiation. In addition, sensors of 100-150 μm thickness, interconnected to FE-I4 read-out chips featuring the previous generation pixel cell size of 50 * 250 μm2, are characterised with testbeams at the CERN-SPS and DESY facilities. The performance of sensors with various designs, irradiated up to a fluence of 1 * 1e16 neq./cm2, is compared in terms of charge collection and hit efficiency. A replacement of the two innermost pixel layers is foreseen during the lifetime of HL-LHC. The replacement will require several months of intervention, during which the remaining detector modules cannot be cooled. They are kept at room temperature, thus inducing an annealing. The performance of irradiated modules will be investigated with testbeam campaigns and the method of accelerated annealing at higher temperatures.
△ Less
Submitted 9 January, 2018;
originally announced January 2018.
-
Performance of irradiated thin n-in-p planar pixel sensors for the ATLAS Inner Tracker upgrade
Authors:
Natascha Savic,
Julien-Christopher Beyer,
Bojan Hiti,
Alessandro La Rosa,
Gregor Kramberger,
Anna Macchiolo,
Igor Mandic,
Richard Nisius,
Martin Petek
Abstract:
The ATLAS collaboration will replace its tracking detector with new all silicon pixel and strip systems. This will allow to cope with the higher radiation and occupancy levels expected after the 5-fold increase in the luminosity of the LHC accelerator complex (HL-LHC). In the new tracking detector (ITk) pixel modules with increased granularity will implement to maintain the occupancy with a higher…
▽ More
The ATLAS collaboration will replace its tracking detector with new all silicon pixel and strip systems. This will allow to cope with the higher radiation and occupancy levels expected after the 5-fold increase in the luminosity of the LHC accelerator complex (HL-LHC). In the new tracking detector (ITk) pixel modules with increased granularity will implement to maintain the occupancy with a higher track density. In addition, both sensors and read-out chips composing the hybrid modules will be produced employing more radiation hard technologies with respect to the present pixel detector. Due to their outstanding performance in terms of radiation hardness, thin n-in-p sensors are promising candidates to instrument a section of the new pixel system. Recently produced and developed sensors of new designs will be presented. To test the sensors before interconnection to chips, a punch-through biasing structure has been implemented. Its design has been optimized to decrease the possible tracking efficiency losses observed. After irradiation, they were caused by the punch-through biasing structure. A sensor compatible with the ATLAS FE-I4 chip with a pixel size of 50x250 $\mathrmμ$m$^{2}$, subdivided into smaller pixel implants of 30x30 $\mathrmμ$m$^{2}$ size was designed to investigate the performance of the 50x50 $\mathrmμ$m$^{2}$ pixel cells foreseen for the HL-LHC. Results on sensor performance of 50x250 and 50x50 $\mathrmμ$m$^{2}$ pixel cells in terms of efficiency, charge collection and electric field properties are obtained with beam tests and the Transient Current Technique.
△ Less
Submitted 25 September, 2017;
originally announced September 2017.
-
Optimization of thin n-in-p planar pixel modules for the ATLAS upgrade at HL-LHC
Authors:
Anna Macchiolo,
Julien Beyer,
Alessandro La Rosa,
Richard Nisius,
Natascha Savic
Abstract:
The ATLAS experiment will undergo around the year 2025 a replacement of the tracker system in view of the high luminosity phase of the LHC (HL-LHC) with a new 5-layer pixel system. Thin planar pixel sensors are promising candidates to instrument the innermost region of the new pixel system, thanks to the reduced contribution to the material budget and their high charge collection efficiency after…
▽ More
The ATLAS experiment will undergo around the year 2025 a replacement of the tracker system in view of the high luminosity phase of the LHC (HL-LHC) with a new 5-layer pixel system. Thin planar pixel sensors are promising candidates to instrument the innermost region of the new pixel system, thanks to the reduced contribution to the material budget and their high charge collection efficiency after irradiation. The sensors of 50-150 $μ$m thickness, interconnected to FE-I4 read-out chips, have been characterized with radioactive sources and beam tests. In particular active edge sensors have been investigated. The performance of two different versions of edge designs are compared: the first with a bias ring, and the second one where only a floating guard ring has been implemented. The hit efficiency at the edge has also been studied after irradiation at a fluence of $10^{15}$ \neqcm. Highly segmented sensors will represent a challenge for the tracking in the forward region of the pixel system at HL-LHC. In order to reproduce the performance of 50x50 $μ$m$^2$ pixels at high pseudo-rapidity values, FE-I4 compatible planar pixel sensors have been studied before and after irradiation in beam tests at high incidence angles with respect to the short pixel direction. Results on the hit efficiency in this configuration are discussed for different sensor thicknesses.
△ Less
Submitted 12 January, 2017;
originally announced January 2017.
-
Characterization of Novel Thin N-in-P Planar Pixel Modules for the ATLAS Inner Tracker Upgrade
Authors:
Julien-Christopher Beyer,
Alessandro La Rosa,
Anna Macchiolo,
Richard Nisius,
Natascha Savic
Abstract:
The ATLAS experiment will undergo a major upgrade of the tracker system in view of the high luminosity phase of the LHC (HL-LHC) to start operation in 2026. The most severe challenges are to be faced by the innermost layers of the pixel detector which will have to withstand a radiation fluence of up to $1.4\times10^{16}\,$n$_\text{eq}$/cm$^{2}$. Thin planar pixel modules are promising candidates t…
▽ More
The ATLAS experiment will undergo a major upgrade of the tracker system in view of the high luminosity phase of the LHC (HL-LHC) to start operation in 2026. The most severe challenges are to be faced by the innermost layers of the pixel detector which will have to withstand a radiation fluence of up to $1.4\times10^{16}\,$n$_\text{eq}$/cm$^{2}$. Thin planar pixel modules are promising candidates to instrument these layers, thanks to the small material budget and their high charge collection efficiency after irradiation. Sensors of $100-200\,μ$m thickness, interconnected to FE-I4 read-out chips, are characterized with radioactive sources as well as testbeams at the CERN-SPS and DESY. The performance of sensors irradiated up to a fluence of $5\times 10^{15}\,$n$_\text{eq}$/cm$^{2}$ is compared in terms of charge collection and hit efficiency. Highly segmented sensors are a challenge for the tracking in the forward region of the pixel system at the HL-LHC. To reproduce the performance of $50$x$50\,μ$m$^2$ pixels at high pseudo-rapidities, FE-I4 compatible planar pixel sensors are studied before and after irradiation in beam tests at high incidence angle ($80^\circ$) with respect to the short pixel direction. Results on cluster shape and hit efficiency will be shown.
△ Less
Submitted 5 December, 2016;
originally announced December 2016.
-
Investigation of thin n-in-p planar pixel modules for the ATLAS upgrade
Authors:
N. Savic,
J. Beyer,
A. La Rosa,
A. Macchiolo,
R. Nisius
Abstract:
In view of the High Luminosity upgrade of the Large Hadron Collider (HL-LHC), planned to start around 2023-2025, the ATLAS experiment will undergo a replacement of the Inner Detector. A higher luminosity will imply higher irradiation levels and hence will demand more ra- diation hardness especially in the inner layers of the pixel system. The n-in-p silicon technology is a promising candidate to i…
▽ More
In view of the High Luminosity upgrade of the Large Hadron Collider (HL-LHC), planned to start around 2023-2025, the ATLAS experiment will undergo a replacement of the Inner Detector. A higher luminosity will imply higher irradiation levels and hence will demand more ra- diation hardness especially in the inner layers of the pixel system. The n-in-p silicon technology is a promising candidate to instrument this region, also thanks to its cost-effectiveness because it only requires a single sided processing in contrast to the n-in-n pixel technology presently employed in the LHC experiments. In addition, thin sensors were found to ensure radiation hardness at high fluences. An overview is given of recent results obtained with not irradiated and irradiated n-in-p planar pixel modules. The focus will be on n-in-p planar pixel sensors with an active thickness of 100 and 150 um recently produced at ADVACAM. To maximize the active area of the sensors, slim and active edges are implemented. The performance of these modules is investigated at beam tests and the results on edge efficiency will be shown.
△ Less
Submitted 28 November, 2016; v1 submitted 16 September, 2016;
originally announced September 2016.
-
A bright triggered twin-photon source in the solid state
Authors:
Tobias Heindel,
Alexander Thoma,
Martin von Helversen,
Marco Schmidt,
Alexander Schlehahn,
Manuel Gschrey,
Peter Schnauber,
Jan-Hindrik Schulze,
André Strittmatter,
Jörn Beyer,
Sven Rodt,
Alexander Carmele,
Andreas Knorr,
Stephan Reitzenstein
Abstract:
A non-classical light source emitting pairs of identical photons represents a versatile resource of interdisciplinary importance with applications in quantum optics and quantum biology. Emerging research fields, which benefit from such type of quantum light source, include quantum-optical spectroscopy or experiments on photoreceptor cells sensitive to photon statistics. To date, photon twins have…
▽ More
A non-classical light source emitting pairs of identical photons represents a versatile resource of interdisciplinary importance with applications in quantum optics and quantum biology. Emerging research fields, which benefit from such type of quantum light source, include quantum-optical spectroscopy or experiments on photoreceptor cells sensitive to photon statistics. To date, photon twins have mostly been generated using parametric downconversion sources, relying on Poissonian number distributions, or atoms, exhibiting low emission rates. Here, we propose and experimentally demonstrate the efficient, triggered generation of photon twins using the energy-degenerate biexciton-exciton radiative cascade of a single semiconductor quantum dot. Deterministically integrated within a microlens, this nanostructure emits highly-correlated photon pairs, degenerate in energy and polarization, at a rate of up to (234 $\pm$ 4) kHz. Furthermore, we verify a significant degree of photon-indistinguishability and directly observe twin-photon emission by employing photon-number-resolving detectors, which enables the reconstruction of the emitted photon number distribution.
△ Less
Submitted 11 January, 2017; v1 submitted 9 August, 2016;
originally announced August 2016.
-
Technical Design Report for the AMoRE $0νββ$ Decay Search Experiment
Authors:
V. Alenkov,
P. Aryal,
J. Beyer,
R. S. Boiko,
K. Boonin,
O. Buzanov,
N. Chanthima,
M. K. Cheoun D. M. Chernyak,
J. Choi,
S. Choi,
F. A. Danevich,
M. Djamal,
D. Drung,
C. Enss,
A. Fleischmann,
A. M. Gangapshev,
L. Gastaldo,
Yu. M. Gavriljuk,
A. M. Gezhaev,
V. I. Gurentsov,
D. H Ha,
I. S. Hahn,
J. H. Jang,
E. J. Jeon,
H. S. Jo
, et al. (65 additional authors not shown)
Abstract:
The AMoRE (Advanced Mo-based Rare process Experiment) project is a series of experiments that use advanced cryogenic techniques to search for the neutrinoless double-beta decay of \mohundred. The work is being carried out by an international collaboration of researchers from eight countries. These searches involve high precision measurements of radiation-induced temperature changes and scintillati…
▽ More
The AMoRE (Advanced Mo-based Rare process Experiment) project is a series of experiments that use advanced cryogenic techniques to search for the neutrinoless double-beta decay of \mohundred. The work is being carried out by an international collaboration of researchers from eight countries. These searches involve high precision measurements of radiation-induced temperature changes and scintillation light produced in ultra-pure \Mo[100]-enriched and \Ca[48]-depleted calcium molybdate ($\mathrm{^{48depl}Ca^{100}MoO_4}$) crystals that are located in a deep underground laboratory in Korea. The \mohundred nuclide was chosen for this \zeronubb decay search because of its high $Q$-value and favorable nuclear matrix element. Tests have demonstrated that \camo crystals produce the brightest scintillation light among all of the molybdate crystals, both at room and at cryogenic temperatures. $\mathrm{^{48depl}Ca^{100}MoO_4}$ crystals are being operated at milli-Kelvin temperatures and read out via specially developed metallic-magnetic-calorimeter (MMC) temperature sensors that have excellent energy resolution and relatively fast response times. The excellent energy resolution provides good discrimination of signal from backgrounds, and the fast response time is important for minimizing the irreducible background caused by random coincidence of two-neutrino double-beta decay events of \mohundred nuclei. Comparisons of the scintillating-light and phonon yields and pulse shape discrimination of the phonon signals will be used to provide redundant rejection of alpha-ray-induced backgrounds. An effective Majorana neutrino mass sensitivity that reaches the expected range of the inverted neutrino mass hierarchy, i.e., 20-50 meV, could be achieved with a 200~kg array of $\mathrm{^{48depl}Ca^{100}MoO_4}$ crystals operating for three years.
△ Less
Submitted 18 December, 2015;
originally announced December 2015.
-
Nanosecond-scale timing jitter in transition edge sensors at telecom and visible wavelengths
Authors:
Antia Lamas-Linares,
Brice Calkins,
Nathan A. Tomlin,
Thomas Gerrits,
Adriana E. Lita,
Joern Beyer,
Richard P. Mirin,
Sae Woo Nam
Abstract:
Transition edge sensors (TES) have the highest reported efficiencies (>98%) for detection of single photons in the visible and near infrared. Experiments in quantum information and foundations of physics that rely critically on this efficiency have started incorporating these detectors into con- ventional quantum optics setups. However, their range of applicability has been hindered by slow operat…
▽ More
Transition edge sensors (TES) have the highest reported efficiencies (>98%) for detection of single photons in the visible and near infrared. Experiments in quantum information and foundations of physics that rely critically on this efficiency have started incorporating these detectors into con- ventional quantum optics setups. However, their range of applicability has been hindered by slow operation both in recovery time and timing jitter. We show here how a conventional tungsten-TES can be operated with jitter times of < 4 ns, well within the timing resolution necessary for MHz clocking of experiments, and providing an important practical simplification for experiments that rely on the simultaneous closing of both efficiency and locality loopholes.
△ Less
Submitted 25 September, 2012;
originally announced September 2012.