-
Impact of helium ion implantation dose and annealing on dense near-surface layers of NV centers
Authors:
A. Berzins,
H. Grube,
E. Sprugis,
G. Vaivars,
I. Fescenko
Abstract:
Implantation of diamonds with helium ions becomes a common method to create hundreds-nanometers-thick near-surface layers of NV centers for high-sensitivity sensing and imaging applications. However, optimal implantation dose and annealing temperature is still a matter of discussion. In this study, we irradiated HPHT diamonds with an initial nitrogen concentration of 100 ppm using different implan…
▽ More
Implantation of diamonds with helium ions becomes a common method to create hundreds-nanometers-thick near-surface layers of NV centers for high-sensitivity sensing and imaging applications. However, optimal implantation dose and annealing temperature is still a matter of discussion. In this study, we irradiated HPHT diamonds with an initial nitrogen concentration of 100 ppm using different implantation doses of helium ions to create 200-nm thick NV layers. We compare a previously considered optimal implantation dose of $\sim10^{12}$ to double and triple doses by measuring fluorescence intensity, contrast, and linewidth of magnetic resonances, as well as longitudinal and transversal relaxation times $T_1$ and $T_2$. From these direct measurements we also estimate concentrations of P1 and NV centers. In addition, we compare the three diamond samples that underwent three consequent annealing steps to quantify the impact of processing at 1100 $^{\circ}$C, which follows initial annealing at 800 $^{\circ}$C. By tripling the implantation dose we have increased the magnetic sensitivity of our sensors by $28\pm5$ %. By projecting our results to higher implantation doses we show that a further improvement of up to 70 % may be achieved. At the same time, additional annealing steps at 1100 $^{\circ}$C improve the sensitivity only by 6.6 $\pm$ 2.7 %.
△ Less
Submitted 29 April, 2022;
originally announced April 2022.
-
Tunable magnetic field source for magnetic field imaging microscopy
Authors:
Andris Berzins,
Hugo Grube,
Reinis Lazda,
Marc A. Hannig,
Janis Smits,
Ilja Fescenko
Abstract:
In this work we present a novel, compact, power efficient magnetic field source design for magnetic field imaging microscopy. The device is based on a pair of diametrically magnetized permanent magnet cylinders with electro-mechanical rotation control and ferrite field concentrators. A Hall probe and NV centers in diamond are used to demonstrate a proof of concept of a proposed magnetic field setu…
▽ More
In this work we present a novel, compact, power efficient magnetic field source design for magnetic field imaging microscopy. The device is based on a pair of diametrically magnetized permanent magnet cylinders with electro-mechanical rotation control and ferrite field concentrators. A Hall probe and NV centers in diamond are used to demonstrate a proof of concept of a proposed magnetic field setup and to characterise the homogeneity of the produced magnetic field on a micrometer scale. Numerical simulation results are compared with experimental results showing good agreement of the distribution of the magnetic field in the setup. As a result, a magnetic field source with a tunable field amplitude in the range from 1 mT to 222 mT is demonstrated, achieving a magnetic field homogeneity of 2 ppm/$μ$m or 0.5 $μ$T/$μ$m at 222 mT in a 25$\times$25 $μ$m field of view.
△ Less
Submitted 31 December, 2021;
originally announced December 2021.
-
NV microscopy of thermally controlled stresses caused by Cr$_2$O$_3$ thin films
Authors:
Andris Berzins,
Janis Smits,
Andrejs Petruhins,
Roberts Rimsa,
Gatis Mozolevskis,
Martins Zubkins,
Ilja Fescenko
Abstract:
Many modern applications, including quantum computing and quantum sensing, use substrate-film interfaces. Particularly, thin films of chromium or titanium and their oxides are commonly used to bind various structures, such as resonators, masks, or microwave antennas, to a diamond surface. Due to different thermal expansions of involved materials, such films and structures could produce significant…
▽ More
Many modern applications, including quantum computing and quantum sensing, use substrate-film interfaces. Particularly, thin films of chromium or titanium and their oxides are commonly used to bind various structures, such as resonators, masks, or microwave antennas, to a diamond surface. Due to different thermal expansions of involved materials, such films and structures could produce significant stresses, which need to be measured or predicted. In this paper, we demonstrate imaging of stresses in the top layer of diamond with deposited structures of Cr$_2$O$_3$ at temperatures 19$^{\circ}$C and 37$^{\circ}$C by using stress-sensitive optically detected magnetic resonances (ODMR) in NV centers. We also calculated stresses in the diamond-film interface by using finite-element analysis and correlated them to measured ODMR frequency shifts. As predicted by the simulation, the measured high-contrast frequency-shift patterns are only due to thermal stresses, whose spin-stress coupling constant along the NV axis is 21$\pm$1 MHz/GPa, that is in agreement with constants previously obtained from single NV centers in diamond cantilever. We demonstrate that NV microscopy is a convenient platform for optically detecting and quantifying spatial distributions of stresses in diamond-based photonic devices with micrometer precision and propose thin films as a means for local application of temperature-controlled stresses. Our results also show that thin film structures produce significant stresses in diamond substrates, which should be accounted for in NV-based applications.
△ Less
Submitted 9 February, 2023; v1 submitted 25 November, 2021;
originally announced November 2021.
-
Surface magnetic structure investigation of a nanolaminated Mn$_2$GaC thin film using a magnetic field microscope based on Nitrogen-Vacancy centers
Authors:
Andris Berzins,
Janis Smits,
Andrejs Petruhins,
Hugo Grube
Abstract:
This work presents a magnetic field imaging method based on color centers in diamond crystal applied to a thin film of a nanolaminated Mn$_2$GaC MAX phase. Magnetic properties of the surface related structures have been described around the first order transition at 214 K by performing measurements in the temperature range between 200 K and 235 K with the surface features fading out by increasing…
▽ More
This work presents a magnetic field imaging method based on color centers in diamond crystal applied to a thin film of a nanolaminated Mn$_2$GaC MAX phase. Magnetic properties of the surface related structures have been described around the first order transition at 214 K by performing measurements in the temperature range between 200 K and 235 K with the surface features fading out by increasing temperature above the transition temperature. The results presented here demonstrate how Nitrogen-Vacancy center based magnetic microscopy can supplement the traditionally used set of experimental techniques, giving additional information of microscopic scale magnetic field features, and allowing to investigate the temperature dependent magnetic behavior. The additional information acquired in this way is relevant to applications where surface magnetic properties are of essence.
△ Less
Submitted 11 November, 2020;
originally announced November 2020.
-
Characterization of microscopic ferromagnetic defects in thin films using magnetic microscope based on Nitrogen-Vacancy centres
Authors:
Andris Berzins,
Janis Smits,
Andrejs Petruhins
Abstract:
In this work we present results acquired by applying magnetic field imaging technique based on Nitrogen-Vacancy centres in diamond crystal for characterization of magnetic thin films defects. We used the constructed wide-field magnetic microscope for measurements of two kinds of magnetic defects in thin films. One family of defects under study was a result of non-optimal thin film growth condition…
▽ More
In this work we present results acquired by applying magnetic field imaging technique based on Nitrogen-Vacancy centres in diamond crystal for characterization of magnetic thin films defects. We used the constructed wide-field magnetic microscope for measurements of two kinds of magnetic defects in thin films. One family of defects under study was a result of non-optimal thin film growth conditions. The magnetic field maps of several regions of the thin films created under very similar conditions to previously published research revealed microscopic impurity islands of ferromagnetic defects, that potentially could disturb the magnetic properties of the surface. The second part of the measurements was dedicated to defects created post deposition - mechanical defects introduced in ferromagnetic thin films. In both cases, the measurements identify the magnetic field amplitude and distribution of the magnetic defects. In addition, the magnetic field maps were correlated with the corresponding optical images. As this method has great potential for quality control of different stages of magnetic thin film manufacturing process and it can rival other widely used measurement techniques, we also propose solutions for the optimization of the device in the perspective of high throughput.
△ Less
Submitted 30 October, 2020;
originally announced October 2020.
-
Investigation of temperature dependence of magnetic properties of Cr$_2$O$_3$ thin film structure using a magnetic field imaging technique based on Nitrogen-Vacancy centres in diamond crystal
Authors:
Andris Berzins,
Janis Smits,
Andrejs Petruhins,
Roberts Rimsa,
Martins Zubkins,
Gatis Mozolevskis
Abstract:
This work presents a magnetic field imaging method based on color centres in diamond crystal applied to thin film structure. To demonstrate the capacity of our device we have used it for characterization of magnetic properties in microscopic scale of Cr$_2$O$_3$ thin film structure above and below Néel temperature. The obtained measurement results clearly identify the detection of the magnetic pha…
▽ More
This work presents a magnetic field imaging method based on color centres in diamond crystal applied to thin film structure. To demonstrate the capacity of our device we have used it for characterization of magnetic properties in microscopic scale of Cr$_2$O$_3$ thin film structure above and below Néel temperature. The obtained measurement results clearly identify the detection of the magnetic phase transition of Cr$_2$O$_3$ thin film with an unexpected diamagnetic like behaviour at 19$^{\circ}$C (below the Néel temperature of Cr$_2$O$_3$). To have better insights in the magnetic fields created by the thin films we present simulations of the magnetic fields near the thin film surface. We also analysed the optically detected magnetic resonance (ODMR) profiles to be sure that the measured property is related only to the shift of the optically detected magnetic resonance. We demonstrate how Nitrogen-Vacancy centre based magnetometry can deliver a convenient platform for research of phase transition dynamics and spatial magnetic field distributions of thin films, that can rival other widely used measurement techniques.
△ Less
Submitted 17 December, 2021; v1 submitted 10 August, 2020;
originally announced August 2020.
-
Standardized Non-Intrusive Reduced Order Modeling Using Different Regression Models With Application to Complex Flow Problems
Authors:
Artūrs Bērziņš,
Jan Helmig,
Fabian Key,
Stefanie Elgeti
Abstract:
In recent years, numerical methods in industrial applications have evolved from a pure predictive tool towards a means for optimization and control. Since standard numerical analysis methods have become prohibitively costly in such multi-query settings, a variety of reduced order modeling (ROM) approaches have been advanced towards complex applications. In this context, the driving application for…
▽ More
In recent years, numerical methods in industrial applications have evolved from a pure predictive tool towards a means for optimization and control. Since standard numerical analysis methods have become prohibitively costly in such multi-query settings, a variety of reduced order modeling (ROM) approaches have been advanced towards complex applications. In this context, the driving application for this work is twin-screw extruders (TSEs): manufacturing devices with an important economic role in plastics processing. Modeling the flow through a TSE requires non-linear material models and coupling with the heat equation alongside intricate mesh deformations, which is a comparatively complex scenario. We investigate how a non-intrusive, data-driven ROM can be constructed for this application. We focus on the well-established proper orthogonal decomposition (POD) with regression albeit we introduce two adaptations: standardizing both the data and the error measures as well as -- inspired by our space-time simulations -- treating time as a discrete coordinate rather than a continuous parameter. We show that these steps make the POD-regression framework more interpretable, computationally efficient, and problem-independent. We proceed to compare the performance of three different regression models: Radial basis function (RBF) regression, Gaussian process regression (GPR), and artificial neural networks (ANNs). We find that GPR offers several advantages over an ANN, constituting a viable and computationally inexpensive non-intrusive ROM. Additionally, the framework is open-sourced to serve as a starting point for other practitioners and facilitate the use of ROM in general engineering workflows.
△ Less
Submitted 22 April, 2021; v1 submitted 24 June, 2020;
originally announced June 2020.
-
Spatial dynamics of laser-induced fluorescence in an intense laser beam: experiment and theory in alkali metal atoms
Authors:
Marcis Auzinsh,
Andris Berzins,
Ruvin Ferber,
Florian Gahbauer,
Uldis Kalnins
Abstract:
We have shown that it is possible to model accurately optical phenomena in intense laser fields by taking into account the intensity distribution over the laser beam. We developed a theoretical model that divided an intense laser beam into concentric regions, each with a Rabi frequency that corresponds to the intensity in that region, and solved a set of coupled optical Bloch equations for the den…
▽ More
We have shown that it is possible to model accurately optical phenomena in intense laser fields by taking into account the intensity distribution over the laser beam. We developed a theoretical model that divided an intense laser beam into concentric regions, each with a Rabi frequency that corresponds to the intensity in that region, and solved a set of coupled optical Bloch equations for the density matrix in each region. Experimentally obtained magneto-optical resonance curves for the $F_g=2\longrightarrow F_e=1$ transition of the $D_1$ line of $^{87}$Rb agreed very well with the theoretical model up to a laser intensity of around 200 mW/cm$^2$ for a transition whose saturation intensity is around 4.5 mW/cm$^2$. We have studied the spatial dependence of the fluorescence intensity in an intense laser beam experimentally and theoretically. An experiment was conducted whereby a broad, intense pump laser excited the $F_g=4\longrightarrow F_e=3$ transition of the $D_2$ line of cesium while a weak, narrow probe beam scanned the atoms within the pump beam and excited the $D_1$ line of cesium, whose fluorescence was recorded as a function of probe beam position. Experimentally obtained spatial profiles of the fluorescence intensity agreed qualitatively with the predictions of the model.
△ Less
Submitted 26 October, 2015;
originally announced October 2015.
-
Alignment-to-orientation conversion in a magnetic field at nonlinear excitation of the $D_2$ line of rubidium: experiment and theory
Authors:
M. Auzinsh,
A. Berzins,
R. Ferber,
F. Gahbauer,
L. Kalvans,
A. Mozers,
A. Spiss
Abstract:
We studied alignment-to-orientation conversion caused by excited-state level crossings in a nonzero magnetic field of both atomic rubidium isotopes. Experimental measurements were performed on the transitions of the $D_2$ line of rubidium. These measured signals were described by a theoretical model that takes into account all neighboring hyperfine transitions, the mixing of magnetic sublevels in…
▽ More
We studied alignment-to-orientation conversion caused by excited-state level crossings in a nonzero magnetic field of both atomic rubidium isotopes. Experimental measurements were performed on the transitions of the $D_2$ line of rubidium. These measured signals were described by a theoretical model that takes into account all neighboring hyperfine transitions, the mixing of magnetic sublevels in an external magnetic field, the coherence properties of the exciting laser radiation, and the Doppler effect. In the experiments laser induced fluorescence (LIF) components were observed at linearly polarized excitation and their difference was taken afterwards. By observing the two oppositely circularly polarized components we were able to see structures not visible in the difference graphs, which yields deeper insight into the processes responsible for these signals. We studied how these signals are dependent on laser power density and how they are affected when the exciting laser is tuned to different hyperfine transitions. The comparison between experiment and theory was carried out fulfilling the nonlinear absorption conditions.
△ Less
Submitted 11 March, 2015;
originally announced March 2015.
-
Relaxation mechanisms affecting magneto-optical resonances in an extremely thin cell: experiment and theory for the cesium D$_1$ line
Authors:
M. Auzinsh,
A. Berzins,
R. Ferber,
F. Gahbauer,
U. Kalnins,
L. Kalvans,
R. Rundans,
D. Sarkisyan
Abstract:
We have measured magneto-optical signals obtained by exciting the $D_1$ line of cesium atoms confined to an extremely thin cell (ETC), whose walls are separated by less than one micrometer, and developed an improved theoretical model to describe these signals with experimental precision. The theoretical model was based on the optical Bloch equations and included all neighboring hyperfine transitio…
▽ More
We have measured magneto-optical signals obtained by exciting the $D_1$ line of cesium atoms confined to an extremely thin cell (ETC), whose walls are separated by less than one micrometer, and developed an improved theoretical model to describe these signals with experimental precision. The theoretical model was based on the optical Bloch equations and included all neighboring hyperfine transitions, the mixing of the magnetic sublevels in an external magnetic field, and the Doppler effect, as in previous studies. However, in order to model the extreme conditions in the ETC more realistically, the model was extended to include a unified treatment of transit relaxation and wall collisions with relaxation rates that were obtained directly from the thermal velocities of the atoms and the length scales involved. Furthermore, the interaction of the atoms with different regions of the laser beam were modeled separately to account for the varying laser beam intensity over the beam profile as well as saturation effects that become important near the center of the beam at the relatively high laser intensities used during the experiments in order to obtain measurable signals. The model described the experimentally measured signals for laser intensities for magnetic fields up to 55~G and laser intensities up to 1~W/cm$^2$ with excellent agreement.
△ Less
Submitted 11 November, 2014;
originally announced November 2014.
-
Coherent and incoherent processes responsible for various characteristics of nonlinear magneto-optical signals in rubidium atoms
Authors:
Marcis Auzinsh,
Andris Berzins,
Ruvin Ferber,
Florian Gahbauer,
Linards Kalvans,
Arturs Mozers
Abstract:
We present the results of an investigation of the different physical processes that influence the shape of the nonlinear magneto-optical signals both at small magnetic field values (~ 100 mG) and at large magnetic field values (several tens of Gauss). We used a theoretical model that provided an accurate description of experimental signals for a wide range of experimental parameters. By turning va…
▽ More
We present the results of an investigation of the different physical processes that influence the shape of the nonlinear magneto-optical signals both at small magnetic field values (~ 100 mG) and at large magnetic field values (several tens of Gauss). We used a theoretical model that provided an accurate description of experimental signals for a wide range of experimental parameters. By turning various effects "on" or "off" inside this model, we investigated the origin of different features of the measured signals. We confirmed that the narrowest structures, with widths on the order of 100 mG, are related mostly to coherences among ground-state magnetic sublevels. The shape of the curves at other scales could be explained by taking into account the different velocity groups of atoms that come into and out of resonance with the exciting laser field. Coherent effects in the excited state can also play a role, although they mostly affect the polarization components of the fluorescence. The results of theoretical calculations are compared with experimental measurements of laser induced fluorescence from the D2 line of atomic rubidium as a function of magnetic field.
△ Less
Submitted 26 July, 2013; v1 submitted 12 April, 2013;
originally announced April 2013.
-
Enhancement of level-crossing resonances in rubidium atoms by frequency control of the exciting radiation field
Authors:
Marcis Auzinsh,
Andris Berzins,
Ruvin Ferber,
Florian Gahbauer,
Linards Kalvans,
Arturs Mozers,
Agris Spiss
Abstract:
We studied magneto-optical resonances caused by excited-state level crossings in a nonzero magnetic field. Experimental measurements were performed on the transitions of the $D_2$ line of rubidium. These measured signals were described by a theoretical model that takes into account all neighboring hyperfine transitions, the mixing of magnetic sublevels in an external magnetic field, the coherence…
▽ More
We studied magneto-optical resonances caused by excited-state level crossings in a nonzero magnetic field. Experimental measurements were performed on the transitions of the $D_2$ line of rubidium. These measured signals were described by a theoretical model that takes into account all neighboring hyperfine transitions, the mixing of magnetic sublevels in an external magnetic field, the coherence properties of the exciting laser radiation, and the Doppler effect. Good agreement between the experimental measurements and the theoretical model could be achieved over a wide range of laser power densities. We further showed that the contrasts of the level-crossing peaks can be sensitive to changes in the frequency of the exciting laser radiation as small as several tens of megahertz when the hyperfine splitting of the exciting state is larger than the Doppler broadening.
△ Less
Submitted 3 January, 2013;
originally announced January 2013.
-
Conversion of bright magneto-optical resonances into dark at fixed laser frequency for D2 excitation of atomic rubidium
Authors:
Marcis Auzinsh,
Andris Berzins,
Ruvin Ferber,
Florian Gahbauer,
Linards Kalvans,
Arturs Mozers,
Dmitrijs Opalevs
Abstract:
Nonlinear magneto-optical resonances on the hyperfine transitions belonging to the D2 line of rubidium were changed from bright to dark resonances by changing the laser power density of the single exciting laser field or by changing the vapor temperature in the cell. In one set of experiments atoms were excited by linearly polarized light from an extended cavity diode laser with polarization vecto…
▽ More
Nonlinear magneto-optical resonances on the hyperfine transitions belonging to the D2 line of rubidium were changed from bright to dark resonances by changing the laser power density of the single exciting laser field or by changing the vapor temperature in the cell. In one set of experiments atoms were excited by linearly polarized light from an extended cavity diode laser with polarization vector perpendicular to the light's propagation direction and magnetic field, and laser induced fluorescence (LIF) was observed along the direction of the magnetic field, which was scanned. A low-contrast bright resonance was observed at low laser power densities when the laser was tuned to the Fg=2 --> Fe=3 transition of Rb-87 and near to the Fg=3 --> Fe=4 transition of Rb-85. The bright resonance became dark as the laser power density was increased above 0.6mW/cm2 or 0.8 mW/cm2, respectively. When the Fg=2 --> Fe=3 transition of Rb-87 was excited with circularly polarized light in a second set of experiments, a bright resonance was observed, which became dark when the temperature was increased to around 50C. The experimental observations at room temperature could be reproduced with good agreement by calculations based on a theoretical model, although the theoretical model was not able to describe measurements at elevated temperatures, where reabsorption was thought to play a decisive role. The model was derived from the optical Bloch equations and included all nearby hyperfine components, averaging over the Doppler profile, mixing of magnetic sublevels in the external magnetic field, and a treatment of the coherence properties of the exciting radiation field.
△ Less
Submitted 28 November, 2011;
originally announced November 2011.
