Showing 1–25 of 25 results for author: Bernauer, J C

Blinding for precision scattering experiments: The MUSE approach as a case study

Authors: J. C. Bernauer, E. W. Cline, H. Atac, W. J. Briscoe, A. Christopher Ndukwe, E. J. Downie, I. P. Fernando, T. Gautam, R. Gilman, R. Goldin, M. Kohl, I. Lavrukhin, W. Lin, W. Lorenzon, P. Mohanmurthy, S. J. Nazeer, M. Nicol, T. Patel, A. Prosnyakov, R. D. Ransome, R. Ratvasky, H. Reid, P. E. Reimer, G. Ron, T. Rostomyan , et al. (5 additional authors not shown)

Abstract: Human bias is capable of changing the analysis of measured data sufficiently to alter the results of an experiment. It is incumbent upon modern experiments, especially those investigating quantities considered contentious in the broader community, to blind their analysis in an effort to minimize bias. The choice of a blinding model is experiment specific, but should also aim to prevent accidental… ▽ More Human bias is capable of changing the analysis of measured data sufficiently to alter the results of an experiment. It is incumbent upon modern experiments, especially those investigating quantities considered contentious in the broader community, to blind their analysis in an effort to minimize bias. The choice of a blinding model is experiment specific, but should also aim to prevent accidental release of results before an analysis is finalized. In this paper, we discuss common threats to an unbiased analysis, as well as common quantities that can be blinded in different types of nuclear physics experiments. We use the Muon Scattering Experiment as an example, and detail the blinding scheme used therein. △ Less

Submitted 16 October, 2023; originally announced October 2023.

Comments: 6 pages, 3 figures

Two-Photon EXchange -- TPEX

Authors: R. Alarcon, R. Beck, J. C. Bernauer, M. Broering, E. Cline, B. Dongwi, I. Fernando, M. Finger, M. Finger Jr., I. Friščić, T. Gautam, D. K. Hasell, O. Hen, J. Holmes, T. Horn, E. Ihloff, R. Johnston, J. Kelsey, M. Kohl, T. Kutz, I. Lavrukhin, S. Lee, W. Lorenzon, F. Maas, H. Merkel , et al. (12 additional authors not shown)

Abstract: We propose a new measurement of the ratio of positron-proton to electron-proton, elastic scattering at DESY to determine the contributions beyond single-photon exchange, which are essential to the QED description of the most fundamental process in hadronic physics. A 20~cm long liquid hydrogen target together with the extracted beam from the DESY synchrotron would yield an average luminosity of… ▽ More We propose a new measurement of the ratio of positron-proton to electron-proton, elastic scattering at DESY to determine the contributions beyond single-photon exchange, which are essential to the QED description of the most fundamental process in hadronic physics. A 20~cm long liquid hydrogen target together with the extracted beam from the DESY synchrotron would yield an average luminosity of $2.12\times10^{35}$~cm$^{-2}\cdot$s$^{-1}\cdot$sr$^{-1}$ ($\sim200$ times the luminosity achieved by OLYMPUS). A commissioning run at 2 GeV followed by measurements at 3 GeV would provide new data up to $Q^2=4.6$~(GeV/$c$)$^2$ (twice the range of current measurements). Lead tungstate calorimeters would be used to detect the scattered leptons at polar angles of $30^\circ$, $50^\circ$, $70^\circ$, $90^\circ$, and $110^\circ$. The measurements could be scheduled to not interfere with the operation of PETRA. We present rate estimates and simulations for the planned measurements including background considerations. Initial measurements at the DESY test beam facility using prototype lead tungstate calorimeters in 2019, 2021, and 2022 were made to check the Monte Carlo simulations and the performance of the calorimeters. These tests also investigated different readout schemes (triggered and streaming). Various upgrades are possible to shorten the running time and to make higher beam energies and thus greater $Q^2$ ranges accessible. △ Less

Submitted 11 January, 2023; originally announced January 2023.

Comments: 45 pages, 43 figures, submitted to the DESY PRC

Design of the ECCE Detector for the Electron Ion Collider

Authors: J. K. Adkins, Y. Akiba, A. Albataineh, M. Amaryan, I. C. Arsene, C. Ayerbe Gayoso, J. Bae, X. Bai, M. D. Baker, M. Bashkanov, R. Bellwied, F. Benmokhtar, V. Berdnikov, J. C. Bernauer, F. Bock, W. Boeglin, M. Borysova, E. Brash, P. Brindza, W. J. Briscoe, M. Brooks, S. Bueltmann, M. H. S. Bukhari, A. Bylinkin, R. Capobianco , et al. (259 additional authors not shown)

Abstract: The EIC Comprehensive Chromodynamics Experiment (ECCE) detector has been designed to address the full scope of the proposed Electron Ion Collider (EIC) physics program as presented by the National Academy of Science and provide a deeper understanding of the quark-gluon structure of matter. To accomplish this, the ECCE detector offers nearly acceptance and energy coverage along with excellent track… ▽ More The EIC Comprehensive Chromodynamics Experiment (ECCE) detector has been designed to address the full scope of the proposed Electron Ion Collider (EIC) physics program as presented by the National Academy of Science and provide a deeper understanding of the quark-gluon structure of matter. To accomplish this, the ECCE detector offers nearly acceptance and energy coverage along with excellent tracking and particle identification. The ECCE detector was designed to be built within the budget envelope set out by the EIC project while simultaneously managing cost and schedule risks. This detector concept has been selected to be the basis for the EIC project detector. △ Less

Submitted 11 May, 2023; v1 submitted 6 September, 2022; originally announced September 2022.

Comments: 32 pages, 29 figures, 9 tables

Detector Requirements and Simulation Results for the EIC Exclusive, Diffractive and Tagging Physics Program using the ECCE Detector Concept

Authors: A. Bylinkin, C. T. Dean, S. Fegan, D. Gangadharan, K. Gates, S. J. D. Kay, I. Korover, W. B. Li, X. Li, R. Montgomery, D. Nguyen, G. Penman, J. R. Pybus, N. Santiesteban, R. Trotta, A. Usman, M. D. Baker, J. Frantz, D. I. Glazier, D. W. Higinbotham, T. Horn, J. Huang, G. Huber, R. Reed, J. Roche , et al. (258 additional authors not shown)

Abstract: This article presents a collection of simulation studies using the ECCE detector concept in the context of the EIC's exclusive, diffractive, and tagging physics program, which aims to further explore the rich quark-gluon structure of nucleons and nuclei. To successfully execute the program, ECCE proposed to utilize the detecter system close to the beamline to ensure exclusivity and tag ion beam/fr… ▽ More This article presents a collection of simulation studies using the ECCE detector concept in the context of the EIC's exclusive, diffractive, and tagging physics program, which aims to further explore the rich quark-gluon structure of nucleons and nuclei. To successfully execute the program, ECCE proposed to utilize the detecter system close to the beamline to ensure exclusivity and tag ion beam/fragments for a particular reaction of interest. Preliminary studies confirmed the proposed technology and design satisfy the requirements. The projected physics impact results are based on the projected detector performance from the simulation at 10 or 100 fb^-1 of integrated luminosity. Additionally, a few insights on the potential 2nd Interaction Region can (IR) were also documented which could serve as a guidepost for the future development of a second EIC detector. △ Less

Submitted 6 March, 2023; v1 submitted 30 August, 2022; originally announced August 2022.

Searching for New Physics with DarkLight at the ARIEL Electron-Linac

Authors: The DarkLight Collaboration, E. Cline, R. Corliss, J. C. Bernauer, R. Alarcon, R. Baartman, S. Benson, J. Bessuille, D. Ciarniello, A. Christopher, A. Colon, W. Deconinck, K. Dehmelt, A. Deshpande, J. Dilling, D. H. Dongwi, P. Fisher, T. Gautam, M. Gericke, D. Hasell, M. Hasinoff, E. Ihloff, R. Johnston, R. Kanungo, J. Kelsey , et al. (21 additional authors not shown)

Abstract: The search for a dark photon holds considerable interest in the physics community. Such a force carrier would begin to illuminate the dark sector. Many experiments have searched for such a particle, but so far it has proven elusive. In recent years the concept of a low mass dark photon has gained popularity in the physics community. Of particular recent interest is the $^8$Be and $^4$He anomaly, w… ▽ More The search for a dark photon holds considerable interest in the physics community. Such a force carrier would begin to illuminate the dark sector. Many experiments have searched for such a particle, but so far it has proven elusive. In recent years the concept of a low mass dark photon has gained popularity in the physics community. Of particular recent interest is the $^8$Be and $^4$He anomaly, which could be explained by a new fifth force carrier with a mass of 17 MeV/$c^2$. The proposed DarkLight experiment would search for this potential low mass force carrier at ARIEL in the 10-20 MeV e$^+$e$^-$ invariant mass range. This proceeding will focus on the experimental design and physics case of the DarkLight experiment. △ Less

Submitted 14 August, 2022; v1 submitted 8 August, 2022; originally announced August 2022.

Comments: 7 pages, 4 figures, to be submitted as part of the proceedings on "New Scientific Opportunities with the TRIUMF ARIEL e-linac"

Open Heavy Flavor Studies for the ECCE Detector at the Electron Ion Collider

Authors: X. Li, J. K. Adkins, Y. Akiba, A. Albataineh, M. Amaryan, I. C. Arsene, C. Ayerbe Gayoso, J. Bae, X. Bai, M. D. Baker, M. Bashkanov, R. Bellwied, F. Benmokhtar, V. Berdnikov, J. C. Bernauer, F. Bock, W. Boeglin, M. Borysova, E. Brash, P. Brindza, W. J. Briscoe, M. Brooks, S. Bueltmann, M. H. S. Bukhari, A. Bylinkin , et al. (262 additional authors not shown)

Abstract: The ECCE detector has been recommended as the selected reference detector for the future Electron-Ion Collider (EIC). A series of simulation studies have been carried out to validate the physics feasibility of the ECCE detector. In this paper, detailed studies of heavy flavor hadron and jet reconstruction and physics projections with the ECCE detector performance and different magnet options will… ▽ More The ECCE detector has been recommended as the selected reference detector for the future Electron-Ion Collider (EIC). A series of simulation studies have been carried out to validate the physics feasibility of the ECCE detector. In this paper, detailed studies of heavy flavor hadron and jet reconstruction and physics projections with the ECCE detector performance and different magnet options will be presented. The ECCE detector has enabled precise EIC heavy flavor hadron and jet measurements with a broad kinematic coverage. These proposed heavy flavor measurements will help systematically study the hadronization process in vacuum and nuclear medium especially in the underexplored kinematic region. △ Less

Submitted 23 July, 2022; v1 submitted 21 July, 2022; originally announced July 2022.

Comments: Open heavy flavor studies with the EIC reference detector design by the ECCE consortium. 11 pages, 11 figures, to be submitted to the Nuclear Instruments and Methods A

Report number: LANL report number: LA-UR-22-27181

Exclusive J/$ψ$ Detection and Physics with ECCE

Authors: X. Li, J. K. Adkins, Y. Akiba, A. Albataineh, M. Amaryan, I. C. Arsene, C. Ayerbe Gayoso, J. Bae, X. Bai, M. D. Baker, M. Bashkanov, R. Bellwied, F. Benmokhtar, V. Berdnikov, J. C. Bernauer, F. Bock, W. Boeglin, M. Borysova, E. Brash, P. Brindza, W. J. Briscoe, M. Brooks, S. Bueltmann, M. H. S. Bukhari, A. Bylinkin , et al. (262 additional authors not shown)

Abstract: Exclusive heavy quarkonium photoproduction is one of the most popular processes in EIC, which has a large cross section and a simple final state. Due to the gluonic nature of the exchange Pomeron, this process can be related to the gluon distributions in the nucleus. The momentum transfer dependence of this process is sensitive to the interaction sites, which provides a powerful tool to probe the… ▽ More Exclusive heavy quarkonium photoproduction is one of the most popular processes in EIC, which has a large cross section and a simple final state. Due to the gluonic nature of the exchange Pomeron, this process can be related to the gluon distributions in the nucleus. The momentum transfer dependence of this process is sensitive to the interaction sites, which provides a powerful tool to probe the spatial distribution of gluons in the nucleus. Recently the problem of the origin of hadron mass has received lots of attention in determining the anomaly contribution $M_{a}$. The trace anomaly is sensitive to the gluon condensate, and exclusive production of quarkonia such as J/$ψ$ and $Υ$ can serve as a sensitive probe to constrain it. In this paper, we present the performance of the ECCE detector for exclusive J/$ψ$ detection and the capability of this process to investigate the above physics opportunities with ECCE. △ Less

Submitted 21 July, 2022; originally announced July 2022.

Comments: 11 pages, 14 figures, 1 table

Design and Simulated Performance of Calorimetry Systems for the ECCE Detector at the Electron Ion Collider

Authors: F. Bock, N. Schmidt, P. K. Wang, N. Santiesteban, T. Horn, J. Huang, J. Lajoie, C. Munoz Camacho, J. K. Adkins, Y. Akiba, A. Albataineh, M. Amaryan, I. C. Arsene, C. Ayerbe Gayoso, J. Bae, X. Bai, M. D. Baker, M. Bashkanov, R. Bellwied, F. Benmokhtar, V. Berdnikov, J. C. Bernauer, W. Boeglin, M. Borysova, E. Brash , et al. (263 additional authors not shown)

Abstract: We describe the design and performance the calorimeter systems used in the ECCE detector design to achieve the overall performance specifications cost-effectively with careful consideration of appropriate technical and schedule risks. The calorimeter systems consist of three electromagnetic calorimeters, covering the combined pseudorapdity range from -3.7 to 3.8 and two hadronic calorimeters. Key… ▽ More We describe the design and performance the calorimeter systems used in the ECCE detector design to achieve the overall performance specifications cost-effectively with careful consideration of appropriate technical and schedule risks. The calorimeter systems consist of three electromagnetic calorimeters, covering the combined pseudorapdity range from -3.7 to 3.8 and two hadronic calorimeters. Key calorimeter performances which include energy and position resolutions, reconstruction efficiency, and particle identification will be presented. △ Less

Submitted 19 July, 2022; originally announced July 2022.

Comments: 19 pages, 22 figures, 5 tables

AI-assisted Optimization of the ECCE Tracking System at the Electron Ion Collider

Authors: C. Fanelli, Z. Papandreou, K. Suresh, J. K. Adkins, Y. Akiba, A. Albataineh, M. Amaryan, I. C. Arsene, C. Ayerbe Gayoso, J. Bae, X. Bai, M. D. Baker, M. Bashkanov, R. Bellwied, F. Benmokhtar, V. Berdnikov, J. C. Bernauer, F. Bock, W. Boeglin, M. Borysova, E. Brash, P. Brindza, W. J. Briscoe, M. Brooks, S. Bueltmann , et al. (258 additional authors not shown)

Abstract: The Electron-Ion Collider (EIC) is a cutting-edge accelerator facility that will study the nature of the "glue" that binds the building blocks of the visible matter in the universe. The proposed experiment will be realized at Brookhaven National Laboratory in approximately 10 years from now, with detector design and R&D currently ongoing. Notably, EIC is one of the first large-scale facilities to… ▽ More The Electron-Ion Collider (EIC) is a cutting-edge accelerator facility that will study the nature of the "glue" that binds the building blocks of the visible matter in the universe. The proposed experiment will be realized at Brookhaven National Laboratory in approximately 10 years from now, with detector design and R&D currently ongoing. Notably, EIC is one of the first large-scale facilities to leverage Artificial Intelligence (AI) already starting from the design and R&D phases. The EIC Comprehensive Chromodynamics Experiment (ECCE) is a consortium that proposed a detector design based on a 1.5T solenoid. The EIC detector proposal review concluded that the ECCE design will serve as the reference design for an EIC detector. Herein we describe a comprehensive optimization of the ECCE tracker using AI. The work required a complex parametrization of the simulated detector system. Our approach dealt with an optimization problem in a multidimensional design space driven by multiple objectives that encode the detector performance, while satisfying several mechanical constraints. We describe our strategy and show results obtained for the ECCE tracking system. The AI-assisted design is agnostic to the simulation framework and can be extended to other sub-detectors or to a system of sub-detectors to further optimize the performance of the EIC detector. △ Less

Submitted 19 May, 2022; v1 submitted 18 May, 2022; originally announced May 2022.

Comments: 16 pages, 18 figures, 2 appendices, 3 tables

Scientific Computing Plan for the ECCE Detector at the Electron Ion Collider

Authors: J. C. Bernauer, C. T. Dean, C. Fanelli, J. Huang, K. Kauder, D. Lawrence, J. D. Osborn, C. Paus, J. K. Adkins, Y. Akiba, A. Albataineh, M. Amaryan, I. C. Arsene, C. Ayerbe Gayoso, J. Bae, X. Bai, M. D. Baker, M. Bashkanov, R. Bellwied, F. Benmokhtar, V. Berdnikov, F. Bock, W. Boeglin, M. Borysova, E. Brash , et al. (256 additional authors not shown)

Abstract: The Electron Ion Collider (EIC) is the next generation of precision QCD facility to be built at Brookhaven National Laboratory in conjunction with Thomas Jefferson National Laboratory. There are a significant number of software and computing challenges that need to be overcome at the EIC. During the EIC detector proposal development period, the ECCE consortium began identifying and addressing thes… ▽ More The Electron Ion Collider (EIC) is the next generation of precision QCD facility to be built at Brookhaven National Laboratory in conjunction with Thomas Jefferson National Laboratory. There are a significant number of software and computing challenges that need to be overcome at the EIC. During the EIC detector proposal development period, the ECCE consortium began identifying and addressing these challenges in the process of producing a complete detector proposal based upon detailed detector and physics simulations. In this document, the software and computing efforts to produce this proposal are discussed; furthermore, the computing and software model and resources required for the future of ECCE are described. △ Less

Submitted 17 May, 2022; originally announced May 2022.

Journal ref: NIMA 1047, 167859 (2023)

Test of streaming and triggered readout schemes for the TPEX Lead Tungstate Calorimeter

Authors: I. Friščić, E. Cline, J. C. Bernauer, D. K. Hasell, R. Johnston, I. Lavrukhin, S. Lee, P. Moran, U. Schneekloth

Abstract: Tests of a prototype lead tungstate calorimeter were made over two weeks at the end of September, 2019, at the DESY II Test Beam Facility in Hamburg, Germany. The purpose of these tests was to gain experience with the construction, operation, and performance of a simple lead tungstate calorimeter, and also to compare a traditional triggered readout scheme with a streaming readout approach. These t… ▽ More Tests of a prototype lead tungstate calorimeter were made over two weeks at the end of September, 2019, at the DESY II Test Beam Facility in Hamburg, Germany. The purpose of these tests was to gain experience with the construction, operation, and performance of a simple lead tungstate calorimeter, and also to compare a traditional triggered readout scheme with a streaming readout approach. These tests are important for the proposed Two-Photon Exchange experiment at DESY and for work towards a future electromagnetic calorimeter that could be used in an Electron-Ion Collider detector. Details on the comparison of streaming and triggered readout schemes are presented here. △ Less

Submitted 26 June, 2023; v1 submitted 2 December, 2021; originally announced December 2021.

Comments: 13 pages, 13 figures

Journal ref: JINST 18 P09001 (2023)

Characterization of Muon and Electron Beams in the Paul Scherrer Institute PiM1 Channel for the MUSE Experiment

Authors: E. Cline, W. Lin, P. Roy, P. E. Reimer, K. E. Mesick, A. Akmal, A. Alie, H. Atac, A. Atencio, C. Ayerbe Gayoso, N. Benmouna, F. Benmokhtar, J. C. Bernauer, W. J. Briscoe, J. Campbell, D. Cohen, E. O. Cohen, C. Collicott, K. Deiters, S. Dogra, E. Downie, I. P. Fernando, A. Flannery, T. Gautam, D. Ghosal , et al. (35 additional authors not shown)

Abstract: The MUon Scattering Experiment, MUSE, at the Paul Scherrer Institute, Switzerland, investigates the proton charge radius puzzle, lepton universality, and two-photon exchange, via simultaneous measurements of elastic muon-proton and electron-proton scattering. The experiment uses the PiM1 secondary beam channel, which was designed for high precision pion scattering measurements. We review the prope… ▽ More The MUon Scattering Experiment, MUSE, at the Paul Scherrer Institute, Switzerland, investigates the proton charge radius puzzle, lepton universality, and two-photon exchange, via simultaneous measurements of elastic muon-proton and electron-proton scattering. The experiment uses the PiM1 secondary beam channel, which was designed for high precision pion scattering measurements. We review the properties of the beam line established for pions. We discuss the production processes that generate the electron and muon beams, and the simulations of these processes. Simulations of the $π$/$μ$/$e$ beams through the channel using TURTLE and G4beamline are compared. The G4beamline simulation is then compared to several experimental measurements of the channel, including the momentum dispersion at the IFP and target, the shape of the beam spot at the target, and timing measurements that allow the beam momenta to be determined. We conclude that the PiM1 channel can be used for high precision $π$, $μ$, and $e$ scattering. △ Less

Submitted 15 September, 2021; originally announced September 2021.

Comments: 20 pages, 18 figures

Operation and characterization of a windowless gas jet target in high-intensity electron beams

Authors: B. S. Schlimme, S. Aulenbacher, P. Brand, M. Littich, Y. Wang, P. Achenbach, M. Ball, J. C. Bernauer, M. Biroth, D. Bonaventura, D. Bosnar, S. Caiazza, M. Christmann, E. Cline, A. Denig, M. O. Distler, L. Doria, P. Eckert, A. Esser, I. Friščić, S. Gagneur, J. Geimer, S. Grieser, P. Gülker, P. Herrmann , et al. (32 additional authors not shown)

Abstract: A cryogenic supersonic gas jet target was developed for the MAGIX experiment at the high-intensity electron accelerator MESA. It will be operated as an internal, windowless target in the energy-recovering recirculation arc of the accelerator with different target gases, e.g., hydrogen, deuterium, helium, oxygen, argon, or xenon. Detailed studies have been carried out at the existing A1 multi-spect… ▽ More A cryogenic supersonic gas jet target was developed for the MAGIX experiment at the high-intensity electron accelerator MESA. It will be operated as an internal, windowless target in the energy-recovering recirculation arc of the accelerator with different target gases, e.g., hydrogen, deuterium, helium, oxygen, argon, or xenon. Detailed studies have been carried out at the existing A1 multi-spectrometer facility at the electron accelerator MAMI. This paper focuses on the developed handling procedures and diagnostic tools, and on the performance of the gas jet target under beam conditions. Considering the special features of this type of target, it proves to be well suited for a new generation of high-precision electron scattering experiments at high-intensity electron accelerators. △ Less

Submitted 16 July, 2021; v1 submitted 27 April, 2021; originally announced April 2021.

Science Requirements and Detector Concepts for the Electron-Ion Collider: EIC Yellow Report

Authors: R. Abdul Khalek, A. Accardi, J. Adam, D. Adamiak, W. Akers, M. Albaladejo, A. Al-bataineh, M. G. Alexeev, F. Ameli, P. Antonioli, N. Armesto, W. R. Armstrong, M. Arratia, J. Arrington, A. Asaturyan, M. Asai, E. C. Aschenauer, S. Aune, H. Avagyan, C. Ayerbe Gayoso, B. Azmoun, A. Bacchetta, M. D. Baker, F. Barbosa, L. Barion , et al. (390 additional authors not shown)

Abstract: This report describes the physics case, the resulting detector requirements, and the evolving detector concepts for the experimental program at the Electron-Ion Collider (EIC). The EIC will be a powerful new high-luminosity facility in the United States with the capability to collide high-energy electron beams with high-energy proton and ion beams, providing access to those regions in the nucleon… ▽ More This report describes the physics case, the resulting detector requirements, and the evolving detector concepts for the experimental program at the Electron-Ion Collider (EIC). The EIC will be a powerful new high-luminosity facility in the United States with the capability to collide high-energy electron beams with high-energy proton and ion beams, providing access to those regions in the nucleon and nuclei where their structure is dominated by gluons. Moreover, polarized beams in the EIC will give unprecedented access to the spatial and spin structure of the proton, neutron, and light ions. The studies leading to this document were commissioned and organized by the EIC User Group with the objective of advancing the state and detail of the physics program and develo** detector concepts that meet the emerging requirements in preparation for the realization of the EIC. The effort aims to provide the basis for further development of concepts for experimental equipment best suited for the science needs, including the importance of two complementary detectors and interaction regions. This report consists of three volumes. Volume I is an executive summary of our findings and developed concepts. In Volume II we describe studies of a wide range of physics measurements and the emerging requirements on detector acceptance and performance. Volume III discusses general-purpose detector concepts and the underlying technologies to meet the physics requirements. These considerations will form the basis for a world-class experimental program that aims to increase our understanding of the fundamental structure of all visible matter △ Less

Submitted 26 October, 2021; v1 submitted 8 March, 2021; originally announced March 2021.

Comments: 902 pages, 415 authors, 151 institutions

Report number: BNL-220990-2021-FORE, JLAB-PHY-21-3198, LA-UR-21-20953

Journal ref: Nucl. Phys. A 1026 (2022) 122447

Timing Detectors with SiPM read-out for the MUSE Experiment at PSI

Authors: Tigran Rostomyan, Ethan Cline, Ievgen Lavrukhin, Hamza Atac, Ariella Atencio, Jan C. Bernauer, William J. Briscoe, Dan Cohen, Erez O. Cohen, Cristina Collicott, Konrad Deiters, Shraddha Dogra, Evangeline Downie, Werner Erni, Ishara P. Fernando, Anne Flannery, Thir Gautam, Debdeep Ghosal, Ronald Gilman, Alexander Golossanov, Jack Hirschman, Minjung Kim, Michael Kohl, Bernd Krusche, Lin Li , et al. (18 additional authors not shown)

Abstract: The Muon Scattering Experiment at the Paul Scherrer Institut uses a mixed beam of electrons, muons, and pions, necessitating precise timing to identify the beam particles and reactions they cause. We describe the design and performance of three timing detectors using plastic scintillator read out with silicon photomultipliers that have been built for the experiment. The Beam Hodoscope, upstream of… ▽ More The Muon Scattering Experiment at the Paul Scherrer Institut uses a mixed beam of electrons, muons, and pions, necessitating precise timing to identify the beam particles and reactions they cause. We describe the design and performance of three timing detectors using plastic scintillator read out with silicon photomultipliers that have been built for the experiment. The Beam Hodoscope, upstream of the scattering target, counts the beam flux and precisely times beam particles both to identify species and provide a starting time for time-of-flight measurements. The Beam Monitor, downstream of the scattering target, counts the unscattered beam flux, helps identify background in scattering events, and precisely times beam particles for time-of-flight measurements. The Beam Focus Monitor, mounted on the target ladder under the liquid hydrogen target inside the target vacuum chamber, is used in dedicated runs to sample the beam spot at three points near the target center, where the beam should be focused. △ Less

Submitted 15 October, 2020; v1 submitted 23 July, 2020; originally announced July 2020.

Comments: Fixed typos, added references, and rephrased some sections to be clearer. Changed numbering of tables and figures in Appendix

Journal ref: Nucl. Instrum. Meth. A 986 (2021) 164801

Measurement of Moller Scattering at 2.5 MeV

Authors: C. S. Epstein, R. Johnston, S. Lee, J. C. Bernauer, R. Corliss, K. Dow, P. Fisher, I. Friscic, D. Hasell, R. G. Milner, P. Moran, S. G. Steadman, Y. Wang, J. Dodge, E. Ihloff, J. Kelsey, C. Vidal, C. M. Cooke

Abstract: Moller scattering is one of the most fundamental processes in QED. Understanding it to high precision is necessary for a variety of modern nuclear and particle physics experiments. In a recent calculation, existing soft-photon radiative corrections were combined with new hard-photon bremsstrahlung calculations to take into account the effect of photon emission at any photon energy, where the elect… ▽ More Moller scattering is one of the most fundamental processes in QED. Understanding it to high precision is necessary for a variety of modern nuclear and particle physics experiments. In a recent calculation, existing soft-photon radiative corrections were combined with new hard-photon bremsstrahlung calculations to take into account the effect of photon emission at any photon energy, where the electron mass was included at all steps. To test the calculation, an experiment was carried out using the 3 MV Van de Graaff electrostatic accelerator at the MIT High Voltage Research Laboratory. Momentum spectra at three scattering angles at an incident electron energy of 2.5 MeV are reported here, and compared to the simulated radiative Moller spectra, based on our previous calculation. Good agreement between the measurements and our calculation is observed in the momentum spectrum at the three angles. △ Less

Submitted 13 April, 2019; v1 submitted 21 March, 2019; originally announced March 2019.

Journal ref: Phys. Rev. D 102, 012006 (2020)

Design and Operation of a Windowless Gas Target Internal to a Solenoidal Magnet for Use with a Megawatt Electron Beam

Authors: S. Lee, R. Corliss, I. Friščić, R. Alarcon, S. Aulenbacher, J. Balewski, S. Benson, J. C. Bernauer, J. Bessuille, J. Boyce, J. Coleman, D. Douglas, C. S. Epstein, P. Fisher, S. Frierson, M. Garçon, J. Grames, D. Hasell, C. Hernandez-Garcia, E. Ihloff, R. Johnston, K. Jordan, R. Kazimi, J. Kelsey, M. Kohl , et al. (15 additional authors not shown)

Abstract: A windowless hydrogen gas target of nominal thickness $10^{19}$ cm$^{-2}$ is an essential component of the DarkLight experiment, which is designed to utilize the megawatt electron beam at an Energy Recovery Linac (ERL). The design of such a target is challenging because the pressure drops by many orders of magnitude between the central, high-density section of the target and the surrounding beamli… ▽ More A windowless hydrogen gas target of nominal thickness $10^{19}$ cm$^{-2}$ is an essential component of the DarkLight experiment, which is designed to utilize the megawatt electron beam at an Energy Recovery Linac (ERL). The design of such a target is challenging because the pressure drops by many orders of magnitude between the central, high-density section of the target and the surrounding beamline, resulting in laminar, transitional, and finally molecular flow regimes. The target system was assembled and operated at Jefferson Lab's Low Energy Recirculator Facility (LERF) in 2016, and subsequently underwent several revisions and calibration tests at MIT Bates in 2017. The system at dynamic equilibrium was simulated in COMSOL to provide a better understanding of its optimal operation at other working points. We have determined that a windowless gas target with sufficiently high density for DarkLight's experimental needs is feasible in an ERL environment. △ Less

Submitted 30 May, 2019; v1 submitted 6 March, 2019; originally announced March 2019.

Comments: 11 pages, 14 figures; v2: minor improvements; v3: author list updated; v4: minor revision

Journal ref: Nucl. Instrum. Methods Phys. Res. A, 939 (2019), pp. 46-54

A helical-shape scintillating fiber trigger and tracker system for the DarkLight experiment and beyond

Authors: Yimin Wang, Ross Corliss, Richard G. Milner, Christoph Tschalaer, Jan C. Bernauer

Abstract: The search for new physics beyond the Standard Model has interesting possibilities at low energies. For example, the recent 6.8$σ$ anomaly reported in the invariant mass of $e^+e^-$ pairs from $^8\text{Be}$ nuclear transitions and the discrepancy between predicted and measured values of muon g-2 give strong motivations for a protophobic fifth-force model. At low energies, the electromagnetic inter… ▽ More The search for new physics beyond the Standard Model has interesting possibilities at low energies. For example, the recent 6.8$σ$ anomaly reported in the invariant mass of $e^+e^-$ pairs from $^8\text{Be}$ nuclear transitions and the discrepancy between predicted and measured values of muon g-2 give strong motivations for a protophobic fifth-force model. At low energies, the electromagnetic interaction is well understood and produces straightforward final states, making it an excellent probe of such models. However, to achieve the required precision, an experiment must address the substantially higher rate of electromagnetic backgrounds. In this paper, we present the results of simulation studies of a trigger system, motivated by the DarkLight experiment, using helical-shape scintillating fibers in a solenoidal magnetic field to veto electron-proton elastic scattering and the associated radiative processes. We also assess the performance of a tracking detector for lepton final states using scintillating fibers in the same setup. △ Less

Submitted 25 March, 2019; v1 submitted 4 December, 2018; originally announced December 2018.

Letter of Intent: A New QCD facility at the M2 beam line of the CERN SPS (COMPASS++/AMBER)

Authors: B. Adams, C. A. Aidala, R. Akhunzyanov, G. D. Alexeev, M. G. Alexeev, A. Amoroso, V. Andrieux, N. V. Anfimov, V. Anosov, A. Antoshkin, K. Augsten, W. Augustyniak, C. D. R. Azevedo, A. Azhibekov, B. Badelek, F. Balestra, M. Ball, J. Barth, R. Beck, Y. Bedfer, J. Berenguer Antequera, J. C. Bernauer, J. Bernhard, M. Bodlak, P. Bordalo , et al. (242 additional authors not shown)

Abstract: A New QCD facility at the M2 beam line of the CERN SPS COMPASS++/AMBER A New QCD facility at the M2 beam line of the CERN SPS COMPASS++/AMBER △ Less

Submitted 25 January, 2019; v1 submitted 2 August, 2018; originally announced August 2018.

Comments: 91 pages, 51 figures

Report number: CERN-SPSC-2019-003 (SPSC-I-250)

A novel technique for determining luminosity in electron-scattering/positron-scattering experiments from multi-interaction events

Authors: A. Schmidt, C. O'Connor, J. C. Bernauer, R. Milner

Abstract: The OLYMPUS experiment measured the cross-section ratio of positron-proton elastic scattering relative to electron-proton elastic scattering to look for evidence of hard two-photon exchange. To make this measurement, the experiment alternated between electron beam and positron beam running modes, with the relative integrated luminosities of the two running modes providing the crucial normalization… ▽ More The OLYMPUS experiment measured the cross-section ratio of positron-proton elastic scattering relative to electron-proton elastic scattering to look for evidence of hard two-photon exchange. To make this measurement, the experiment alternated between electron beam and positron beam running modes, with the relative integrated luminosities of the two running modes providing the crucial normalization. For this reason, OLYMPUS had several redundant luminosity monitoring systems, including a pair of electromagnetic calorimeters positioned downstream from the target to detect symmetric Mø ller and Bhabha scattering from atomic electrons in the hydrogen gas target. Though this system was designed to monitor the rate of events with single Mø ller/Bhabha interactions, we found that a more accurate determination of relative luminosity could be made by additionally considering the rate of events with both a Mø ller/Bhabha interaction and a concurrent elastic $ep$ interaction. This method was improved by small corrections for the variance of the current within bunches in the storage ring and for the probability of three interactions occurring within a bunch. After accounting for systematic effects, we estimate that the method is accurate in determining the relative luminosity to within 0.36\%. This precise technique can be employed in future electron-proton and positron-proton scattering experiments to monitor relative luminosity between different running modes. △ Less

Submitted 22 September, 2017; v1 submitted 14 August, 2017; originally announced August 2017.

Journal ref: NIM A 877 pp. 112--117 (2018)

Measurement and tricubic interpolation of the magnetic field for the OLYMPUS experiment

Authors: J. C. Bernauer, J. Diefenbach, G. Elbakian, G. Gavrilov, N. Goerrissen, D. K. Hasel, B. S. Henderson, Y. Holler, G. Karyan, J. Ludwig, H. Marukyan, Y. Naryshkin, C. O'Connor, R. L. Russell, A. Schmidt, U. Schneekloth, K. Suvorov, D. Veretennikov

Abstract: The OLYMPUS experiment used a 0.3 T toroidal magnetic spectrometer to measure the momenta of outgoing charged particles. In order to accurately determine particle trajectories, knowledge of the magnetic field was needed throughout the spectrometer volume. For that purpose, the magnetic field was measured at over 36,000 positions using a three-dimensional Hall probe actuated by a system of translat… ▽ More The OLYMPUS experiment used a 0.3 T toroidal magnetic spectrometer to measure the momenta of outgoing charged particles. In order to accurately determine particle trajectories, knowledge of the magnetic field was needed throughout the spectrometer volume. For that purpose, the magnetic field was measured at over 36,000 positions using a three-dimensional Hall probe actuated by a system of translation tables. We used these field data to fit a numerical magnetic field model, which could be employed to calculate the magnetic field at any point in the spectrometer volume. Calculations with this model were computationally intensive; for analysis applications where speed was crucial, we pre-computed the magnetic field and its derivatives on an evenly spaced grid so that the field could be interpolated between grid points. We developed a spline-based interpolation scheme suitable for SIMD implementations, with a memory layout chosen to minimize space and optimize the cache behavior to quickly calculate field values. This scheme requires only one-eighth of the memory needed to store necessary coefficients compared with a previous scheme [1]. This method was accurate for the vast majority of the spectrometer volume, though special fits and representations were needed to improve the accuracy close to the magnet coils and along the toroid axis. △ Less

Submitted 21 March, 2016; originally announced March 2016.

Comments: 7 pages, 8 figures

Journal ref: Nucl. Instrum. Meth. A 823, 9-14 (2016)

The OLYMPUS Internal Hydrogen Target

Authors: J. C. Bernauer, V. Carassiti, G. Ciullo, B. S. Henderson, E. Ihloff, J. Kelsey, P. Lenisa, R. Milner, A. Schmidt, M. Statera

Abstract: An internal hydrogen target system was developed for the OLYMPUS experiment at DESY, in Hamburg, Germany. The target consisted of a long, thin-walled, tubular cell within an aluminum scattering chamber. Hydrogen entered at the center of the cell and exited through the ends, where it was removed from the beamline by a multistage pum** system. A cryogenic coldhead cooled the target cell to counter… ▽ More An internal hydrogen target system was developed for the OLYMPUS experiment at DESY, in Hamburg, Germany. The target consisted of a long, thin-walled, tubular cell within an aluminum scattering chamber. Hydrogen entered at the center of the cell and exited through the ends, where it was removed from the beamline by a multistage pum** system. A cryogenic coldhead cooled the target cell to counteract heating from the beam and increase the density of hydrogen in the target. A fixed collimator protected the cell from synchrotron radiation and the beam halo. A series of wakefield suppressors reduced heating from beam wakefields. The target system was installed within the DORIS storage ring and was successfully operated during the course of the OLYMPUS experiment in 2012. Information on the design, fabrication, and performance of the target system is reported. △ Less

Submitted 2 April, 2014; originally announced April 2014.

Comments: 9 pages, 13 figures

Journal ref: Nucl. Instrum. Meth. A 755, 20-27 (2014)

The OLYMPUS Experiment

Authors: R. Milner, D. K. Hasell, M. Kohl, U. Schneekloth, N. Akopov, R. Alarcon, V. A. Andreev, O. Ates, A. Avetisyan, D. Bayadilov, R. Beck, S. Belostotski, J. C. Bernauer, J. Bessuille, F. Brinker, B. Buck, J. R. Calarco, V. Carassiti, E. Cisbani, G. Ciullo, M. Contalbrigo, N. D'Ascenzo, R. De Leo, J. Diefenbach, T. W. Donnelly , et al. (48 additional authors not shown)

Abstract: The OLYMPUS experiment was designed to measure the ratio between the positron-proton and electron-proton elastic scattering cross sections, with the goal of determining the contribution of two-photon exchange to the elastic cross section. Two-photon exchange might resolve the discrepancy between measurements of the proton form factor ratio, $μ_p G^p_E/G^p_M$, made using polarization techniques and… ▽ More The OLYMPUS experiment was designed to measure the ratio between the positron-proton and electron-proton elastic scattering cross sections, with the goal of determining the contribution of two-photon exchange to the elastic cross section. Two-photon exchange might resolve the discrepancy between measurements of the proton form factor ratio, $μ_p G^p_E/G^p_M$, made using polarization techniques and those made in unpolarized experiments. OLYMPUS operated on the DORIS storage ring at DESY, alternating between 2.01~GeV electron and positron beams incident on an internal hydrogen gas target. The experiment used a toroidal magnetic spectrometer instrumented with drift chambers and time-of-flight detectors to measure rates for elastic scattering over the polar angular range of approximately $25^\circ$--$75^\circ$. Symmetric Møller/Bhabha calorimeters at $1.29^\circ$ and telescopes of GEM and MWPC detectors at $12^\circ$ served as luminosity monitors. A total luminosity of approximately 4.5~fb$^{-1}$ was collected over two running periods in 2012. This paper provides details on the accelerator, target, detectors, and operation of the experiment. △ Less

Submitted 5 December, 2013; originally announced December 2013.

Comments: 40 pages, 26 figures

Journal ref: Nuclear Inst. and Methods in Physics Research, A (2014) pp. 1-17

A Large-Scale FPGA-Based Trigger and Dead-Time Free DAQ System for the Kaos Spectrometer at MAMI

Authors: P. Achenbach, C. Ayerbe Gayoso, J. C. Bernauer, R. Böhm, D. Bosnar, L. Debenjak, M. O. Distler, A. Esser, I. Friščić, M. Gómez Rodríguez de la Paz, J. Hoffmann, M. Makek, H. Merkel, S. Minami, U. Müller, L. Nungesser, W. Ott, J. Pochodzalla, M. Potokar, I. Rusanov, T. R. Saito, S. Sánchez Majos, B. S. Schlimme, S. Širca, S. Voltz , et al. (2 additional authors not shown)

Abstract: The Kaos spectrometer is maintained by the A1 collaboration at the Mainz Microtron MAMI with a focus on the study of (e,e'K^+) coincidence reactions. For its electron-arm two vertical planes of fiber arrays, each comprising approximately 10 000 fibers, are operated close to zero degree scattering angle and in close proximity to the electron beam. A nearly dead-time free DAQ system to acquire timin… ▽ More The Kaos spectrometer is maintained by the A1 collaboration at the Mainz Microtron MAMI with a focus on the study of (e,e'K^+) coincidence reactions. For its electron-arm two vertical planes of fiber arrays, each comprising approximately 10 000 fibers, are operated close to zero degree scattering angle and in close proximity to the electron beam. A nearly dead-time free DAQ system to acquire timing and tracking information has been installed for this spectrometer arm. The signals of 144 multi-anode photomultipliers are collected by 96-channel front-end boards, digitized by double-threshold discriminators and the signal time is picked up by state-of-the-art F1 time-to-digital converter chips. In order to minimize background rates a sophisticated trigger logic was implemented in newly developed Vuprom modules. The trigger performs noise suppression, signal cluster finding, particle tracking, and coincidence timing, and can be expanded for kinematical matching (e'K^+) coincidences. The full system was designed to process more than 4 000 read-out channels and to cope with the high electron flux in the spectrometer and the high count rate requirement of the detectors. It was successfully in-beam tested at MAMI in 2009. △ Less

Submitted 1 May, 2011; originally announced May 2011.

Comments: Contributed to 17th IEEE Real Time Conference (RT10), Lisbon, 24-28 May 2010

Journal ref: IEEE Transactions on Nuclear Science, Vol. 58, No. 4, 2011, PAGE 1677

Particle tracking in kaon electroproduction with cathode-charge sampling in multi-wire proportional chambers

Authors: P. Achenbach, C. Ayerbe Gayoso, J. C. Bernauer, R. Böhm, D. Bosnar, M. Bösz, L. Debenjak, M. O. Distler, A. Esser, I. Friščić, M. Gómez Rodríguez de la Paz, M. Makek, H. Merkel, U. Müller, L. Nungesser, J. Pochodzalla, M. Potokar, S. Sánchez Majos, B. S. Schlimme, S. Širca, M. Weinriefer

Abstract: Wire chambers are routinely operated as tracking detectors in magnetic spectrometers at high-intensity continuous electron beams. Especially in experiments studying reactions with small cross-sections the reaction yield is limited by the background rate in the chambers. One way to determine the track of a charged particle through a multi-wire proportional chamber (MWPC) is the measurement of the c… ▽ More Wire chambers are routinely operated as tracking detectors in magnetic spectrometers at high-intensity continuous electron beams. Especially in experiments studying reactions with small cross-sections the reaction yield is limited by the background rate in the chambers. One way to determine the track of a charged particle through a multi-wire proportional chamber (MWPC) is the measurement of the charge distribution induced on its cathodes. In practical applications of this read-out method, the algorithm to relate the measured charge distribution to the avalanche position is an important factor for the achievable position resolution and for the track reconstruction efficiency. An algorithm was developed for operating two large-sized MWPCs in a strong background environment with multiple-particle tracks. Resulting efficiencies were determined as a function of the electron beam current and on the signal amplitudes. Because of the different energy-losses of pions, kaons, and protons in the momentum range of the spectrometer the efficiencies depend also on the particle species. △ Less

Submitted 21 April, 2011; originally announced April 2011.

Journal ref: Nucl.Instrum.Meth.A641:105-113,2011