-
Reversible single-pulse laser-induced phase change of Sb$_2$S$_3$ thin films: multi-physics modeling and experimental demonstrations
Authors:
Capucine Laprais,
Clément Zrounba,
Julien Bouvier,
Nicholas Blanchard,
Matthieu Bugnet,
Yael Gutiérrez,
Saul Vazquez-Miranda,
Shirly Espinoza,
Peter Thiesen,
Romain Bourrellier,
Aziz Benamrouche,
Nicolas Baboux,
Guillaume Saint-Girons,
Lotfi Berguiga,
Sébastien Cueff
Abstract:
Phase change materials (PCMs) have gained a tremendous interest as a means to actively tune nanophotonic devices through the large optical modulation produced by their amorphous to crystalline reversible transition. Recently, materials such as Sb$_2$S$_3$ emerged as particularly promising low loss PCMs, with both large refractive index modulations and transparency in the visible and NIR. Controlli…
▽ More
Phase change materials (PCMs) have gained a tremendous interest as a means to actively tune nanophotonic devices through the large optical modulation produced by their amorphous to crystalline reversible transition. Recently, materials such as Sb$_2$S$_3$ emerged as particularly promising low loss PCMs, with both large refractive index modulations and transparency in the visible and NIR. Controlling the local and reversible phase transition in this material is of major importance for future applications, and an appealing method to do so is to exploit pulsed lasers. Yet, the physics and limits involved in the optical switching of Sb$_2$S$_3$ are not yet well understood. Here, we investigate the reversible laser-induced phase transition of Sb$_2$S$_3$, focusing specifically on the mechanisms that drive the optically induced amorphization, with multi-physics considerations including the optical and thermal properties of the PCM and its environment. We theoretically and experimentally determine the laser energy threshold for reversibly changing the phase of the PCM, not only between fully amorphous and crystalline states but also between partially recrystallized states. We then reveal the non-negligible impact of the material's polycrystallinity and anisotropy on the power thresholds for optical switching. Finally, we address the challenges related to laser amorphization of thick Sb$_2$S$_3$ layers, as well as strategies to overcome them. These results enable a qualitative and quantitative understanding of the physics behind the optically-induced reversible change of phase in Sb$_2$S$_3$ layers.
△ Less
Submitted 3 May, 2024;
originally announced May 2024.
-
A simple method for programming and analyzing multilevel crystallization states in phase-change materials thin film
Authors:
Arnaud Taute,
Sadek Al-Jibouri,
Capucine Laprais,
Stéphane Monfray,
Julien Lumeau,
Antonin Moreau,
Xavier Letartre,
Nicolas Baboux,
Guillaume Saint-Girons,
Lotfi Berguiga,
Sébastien Cueff
Abstract:
We propose and demonstrate a simple method to accurately monitor and program arbitrary states of partial crystallization in phase-change materials (PCMs). The method relies both on the optical absorption in PCMs as well as on the physics of crystallization kinetics. Instead of raising temperature incrementally to increase the fraction of crystallized material, we leverage the time evolution of cry…
▽ More
We propose and demonstrate a simple method to accurately monitor and program arbitrary states of partial crystallization in phase-change materials (PCMs). The method relies both on the optical absorption in PCMs as well as on the physics of crystallization kinetics. Instead of raising temperature incrementally to increase the fraction of crystallized material, we leverage the time evolution of crystallization at constant temperatures and couple this to a real-time optical monitoring to precisely control the change of phase. We experimentally demonstrate this scheme by encoding a dozen of distinct states of crystallization in two different PCMs: GST and Sb2S3. We further exploit this time-crystallization for the in-situ analysis of phase change mechanisms and demonstrate that the physics of crystallization in Sb2S3 is fully described by the so-called Johnson-Mehl-Avrami-Kolmogorov formalism. The presented method not only paves the way towards real-time and model-free programming of non-volatile reconfigurable photonic integrated devices, but also provides crucial insights into the physics of crystallization in PCMs.
△ Less
Submitted 30 June, 2023;
originally announced June 2023.
-
Ultimate Phase Sensitivity in Surface Plasmon Resonance Sensors by Tuning Critical Coupling with Phase Change Materials
Authors:
Lotfi Berguiga,
Lydie Ferrier,
Cécile Jamois,
Taha Benyattou,
Xavier Letartre,
Sébastien Cueff
Abstract:
Plasmonic sensing is an established technology for real-time biomedical diagnostics and air-quality monitoring. While intensity and wavelength tracking are the most commonly used interrogation methods for Surface Plasmon Resonance (SPR), several works indicate the potential superiority of phase interrogation in detection sensitivity. Here, we theoretically and numerically establish the link betwee…
▽ More
Plasmonic sensing is an established technology for real-time biomedical diagnostics and air-quality monitoring. While intensity and wavelength tracking are the most commonly used interrogation methods for Surface Plasmon Resonance (SPR), several works indicate the potential superiority of phase interrogation in detection sensitivity. Here, we theoretically and numerically establish the link between ultra-high sensitivities in phase interrogation SPR sensors and the critical coupling condition. However, reaching this condition requires a technically infeasible angstrom-level precision in the metal layer thickness. We propose a robust solution to overcome this limitation by coupling the SPR with a phase-change material (PCM) thin film. By exploiting the multilevel reconfigurable phase states of PCM, we theoretically demonstrate ultra-high phase sensitivities with a limit of detection as low as $10^{-10}$ refractive index unit (RIU). Such a PCM-assisted SPR sensor platform paves the way for unprecedented sensitivity sensors for the detection of trace amounts of low molecular weight species in biomedical sensing and environmental monitoring.
△ Less
Submitted 16 September, 2021;
originally announced September 2021.
-
Reconfigurable Flat Optics with Programmable Reflection Amplitude Using Lithography-Free Phase-Change Materials Ultra Thin Films
Authors:
Sebastien Cueff,
Arnaud Taute,
Antoine Bourgade,
Julien Lumeau,
Stephane Monfray,
Qinghua Song,
Patrice Genevet,
Xavier Letartre,
Lotfi Berguiga
Abstract:
We experimentally demonstrate a very large dynamic optical reflection modulation from a simple unpatterned layered stack of phase-change materials ultrathin films. Specifically, we theoretically and experimentally demonstrate that properly designed deeply subwavelength GeSbTe (GST) films on a metallic mirror produce a dynamic modulation of light in the near-infrared from very strong reflection (R>…
▽ More
We experimentally demonstrate a very large dynamic optical reflection modulation from a simple unpatterned layered stack of phase-change materials ultrathin films. Specifically, we theoretically and experimentally demonstrate that properly designed deeply subwavelength GeSbTe (GST) films on a metallic mirror produce a dynamic modulation of light in the near-infrared from very strong reflection (R>80%) to perfect absorption (A > 99,97%) by simply switching the crystalline state of the phase-change material. While the amplitude of modulation can lead to an optical contrast up to 10^6, we can also actively "write" intermediate levels of reflection in between extreme values, corresponding to partial crystallization of the GST layer. We further explore several layered system designs and provide guidelines to tailor the wavelength efficiency range, the angle of operation and the degree of crystallization leading to perfect absorption.
△ Less
Submitted 5 September, 2020;
originally announced September 2020.
-
Realization of Bound state In the Continuum induced by vertical symmetry breaking in photonic lattice
Authors:
Raphael Mermet-Lyaudoz,
Florian Dubois,
Ngoc-Vu Hoang,
Emmanuel Drouard,
Lotfi Berguiga,
Christian Seassal,
Xavier Letartre,
Pierre Viktorovitch,
Hai Son Nguyen
Abstract:
We demonstrate experimentally a new type of Bound state In the Continuum (BIC) which is induced by the vertical symmetry breaking of a photonic crystal slab. Such BIC emerges from the hybridization between Bloch resonances of opposite parities once the vertical symmetry is broken, and is observed in the vicinity of the anticrossing point at the lower hybrid band of the energy-momentum diagram. All…
▽ More
We demonstrate experimentally a new type of Bound state In the Continuum (BIC) which is induced by the vertical symmetry breaking of a photonic crystal slab. Such BIC emerges from the hybridization between Bloch resonances of opposite parities once the vertical symmetry is broken, and is observed in the vicinity of the anticrossing point at the lower hybrid band of the energy-momentum diagram. All experimental results are nicely reproduced by numerical simulations, and in good agreement with an analytical model based on Friedrich-Wintgen framework. Together with the possibility of dispersion engineering by vertical symmetry breaking, our results open the way to tailor photonic states in the entire complex plane to study non-hermitian photonics.
△ Less
Submitted 9 May, 2019;
originally announced May 2019.
-
Super Bound States in the Continuum on Photonic Flatbands: Concept, Experimental Realization, and Optical Trap** Demonstration
Authors:
Ngoc Duc Le,
Paul Bouteyre,
Ali Kheir-Aldine,
Florian Dubois,
Sébastien Cueff,
Lotfi Berguiga,
Xavier Letartre,
Pierre Viktorovitch,
Taha Benyattou,
Hai Son Nguyen
Abstract:
In this work, we theoretically propose and experimentally demonstrate the formation of a super bound state in a continuum (BIC) on a photonic crystal flat band. This unique state simultaneously exhibits an enhanced quality factor and near-zero group velocity across an extended region of the Brillouin zone. It is achieved at the topological transition when a symmetry-protected BIC pinned at $k=0$ m…
▽ More
In this work, we theoretically propose and experimentally demonstrate the formation of a super bound state in a continuum (BIC) on a photonic crystal flat band. This unique state simultaneously exhibits an enhanced quality factor and near-zero group velocity across an extended region of the Brillouin zone. It is achieved at the topological transition when a symmetry-protected BIC pinned at $k=0$ merges with two Friedrich-Wintgen quasi-BICs, which arise from destructive interference between lossy photonic modes of opposite symmetries. As a proof-of-concept, we employ the super flat BIC to demonstrate three-dimensional optical trap** of individual particles. Our findings present a novel approach to engineering both the real and imaginary components of photonic states on a subwavelength scale for innovative optoelectronic devices.
△ Less
Submitted 23 March, 2024; v1 submitted 1 May, 2019;
originally announced May 2019.
-
Tamm plasmon Photonic Crystals : from Bandgap Engineering to Defect Cavity
Authors:
Lydie Ferrier,
Hai Son Nguyen,
Cécile Jamois,
Lotfi Berguiga,
Clémentine Symonds,
Joel Bellessa,
Taha Benyattou
Abstract:
We report for the first time the bandgap engineering of Tamm plasmon photonic crystals - Tamm plasmon structures of which the metalic layer is periodically patterned into lattice of subwavelength period. By adopting a double period design, we evidenced experimentally a complete photonic bandgap up to $150\,nm$ in the telecom range. Moreover, such design offers a great flexibility to tailor on-dema…
▽ More
We report for the first time the bandgap engineering of Tamm plasmon photonic crystals - Tamm plasmon structures of which the metalic layer is periodically patterned into lattice of subwavelength period. By adopting a double period design, we evidenced experimentally a complete photonic bandgap up to $150\,nm$ in the telecom range. Moreover, such design offers a great flexibility to tailor on-demand, and independently, the band-gap size from $30\,nm$ to $150\,nm$ and its spectral position within $50\,nm$. Finally, by implementing a defect cavity within the Tamm plasmon photonic crystal, an ultimate cavity of $1.6μm$ supporting a single highly confined Tamm mode is experimentally demonstrated. All experimental results are in perfect agreement with numerical calculations. Our results suggests the possibility to engineer novel band dispersion with surface modes of hybrid metalic/dielectric structures, thus open the way to Tamm plasmon towards applications in topological photonics, metamaterials and parity symmetry physics.
△ Less
Submitted 14 October, 2018;
originally announced October 2018.