Showing 1–50 of 65 results for author: Berger, J

Performance of a modular ton-scale pixel-readout liquid argon time projection chamber

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, T. Alves, H. Amar, P. Amedo, J. Anderson, D. A. Andrade , et al. (1340 additional authors not shown)

Abstract: The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmi… ▽ More The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmic ray events collected in the spring of 2021. We use this sample to demonstrate the imaging performance of the charge and light readout systems as well as the signal correlations between the two. We also report argon purity and detector uniformity measurements, and provide comparisons to detector simulations. △ Less

Submitted 5 March, 2024; originally announced March 2024.

Comments: 47 pages, 41 figures

Report number: FERMILAB-PUB-24-0073-LBNF

Do** Liquid Argon with Xenon in ProtoDUNE Single-Phase: Effects on Scintillation Light

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, H. Amar Es-sghir, P. Amedo, J. Anderson, D. A. Andrade, C. Andreopoulos , et al. (1300 additional authors not shown)

Abstract: Do** of liquid argon TPCs (LArTPCs) with a small concentration of xenon is a technique for light-shifting and facilitates the detection of the liquid argon scintillation light. In this paper, we present the results of the first do** test ever performed in a kiloton-scale LArTPC. From February to May 2020, we carried out this special run in the single-phase DUNE Far Detector prototype (ProtoDUN… ▽ More Do** of liquid argon TPCs (LArTPCs) with a small concentration of xenon is a technique for light-shifting and facilitates the detection of the liquid argon scintillation light. In this paper, we present the results of the first do** test ever performed in a kiloton-scale LArTPC. From February to May 2020, we carried out this special run in the single-phase DUNE Far Detector prototype (ProtoDUNE-SP) at CERN, featuring 770 t of total liquid argon mass with 410 t of fiducial mass. The goal of the run was to measure the light and charge response of the detector to the addition of xenon, up to a concentration of 18.8 ppm. The main purpose was to test the possibility for reduction of non-uniformities in light collection, caused by deployment of photon detectors only within the anode planes. Light collection was analysed as a function of the xenon concentration, by using the pre-existing photon detection system (PDS) of ProtoDUNE-SP and an additional smaller set-up installed specifically for this run. In this paper we first summarize our current understanding of the argon-xenon energy transfer process and the impact of the presence of nitrogen in argon with and without xenon dopant. We then describe the key elements of ProtoDUNE-SP and the injection method deployed. Two dedicated photon detectors were able to collect the light produced by xenon and the total light. The ratio of these components was measured to be about 0.65 as 18.8 ppm of xenon were injected. We performed studies of the collection efficiency as a function of the distance between tracks and light detectors, demonstrating enhanced uniformity of response for the anode-mounted PDS. We also show that xenon do** can substantially recover light losses due to contamination of the liquid argon by nitrogen. △ Less

Submitted 9 February, 2024; v1 submitted 2 February, 2024; originally announced February 2024.

Comments: 35 pages, 20 figures

Report number: CERN-EP-2024-024; FERMILAB-PUB-23-0819-LBNF

The DUNE Far Detector Vertical Drift Technology, Technical Design Report

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, H. Amar, P. Amedo, J. Anderson, D. A. Andrade, C. Andreopoulos , et al. (1304 additional authors not shown)

Abstract: DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precisi… ▽ More DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precision measurements of the PMNS matrix parameters, including the CP-violating phase. It will also stand ready to observe supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model. The DUNE far detector implements liquid argon time-projection chamber (LArTPC) technology, and combines the many tens-of-kiloton fiducial mass necessary for rare event searches with the sub-centimeter spatial resolution required to image those events with high precision. The addition of a photon detection system enhances physics capabilities for all DUNE physics drivers and opens prospects for further physics explorations. Given its size, the far detector will be implemented as a set of modules, with LArTPC designs that differ from one another as newer technologies arise. In the vertical drift LArTPC design, a horizontal cathode bisects the detector, creating two stacked drift volumes in which ionization charges drift towards anodes at either the top or bottom. The anodes are composed of perforated PCB layers with conductive strips, enabling reconstruction in 3D. Light-trap-style photon detection modules are placed both on the cryostat's side walls and on the central cathode where they are optically powered. This Technical Design Report describes in detail the technical implementations of each subsystem of this LArTPC that, together with the other far detector modules and the near detector, will enable DUNE to achieve its physics goals. △ Less

Submitted 5 December, 2023; originally announced December 2023.

Comments: 425 pages; 281 figures Central editing team: A. Heavey, S. Kettell, A. Marchionni, S. Palestini, S. Rajogopalan, R. J. Wilson

Report number: Fermilab Report no: TM-2813-LBNF

2023 Astrophotonics Roadmap: pathways to realizing multi-functional integrated astrophotonic instruments

Authors: Nemanja Jovanovic, Pradip Gatkine, Narsireddy Anugu, Rodrigo Amezcua-Correa, Ritoban Basu Thakur, Charles Beichman, Chad Bender, Jean-Philippe Berger, Azzurra Bigioli, Joss Bland-Hawthorn, Guillaume Bourdarot, Charles M. Bradford, Ronald Broeke, Julia Bryant, Kevin Bundy, Ross Cheriton, Nick Cvetojevic, Momen Diab, Scott A. Diddams, Aline N. Dinkelaker, Jeroen Duis, Stephen Eikenberry, Simon Ellis, Akira Endo, Donald F. Figer , et al. (55 additional authors not shown)

Abstract: Photonics offer numerous functionalities that can be used to realize astrophotonic instruments. The most spectacular example to date is the ESO Gravity instrument at the Very Large Telescope in Chile. Integrated astrophotonic devices stand to offer critical advantages for instrument development, including extreme miniaturization, as well as integration, superior thermal and mechanical stabilizatio… ▽ More Photonics offer numerous functionalities that can be used to realize astrophotonic instruments. The most spectacular example to date is the ESO Gravity instrument at the Very Large Telescope in Chile. Integrated astrophotonic devices stand to offer critical advantages for instrument development, including extreme miniaturization, as well as integration, superior thermal and mechanical stabilization owing to the small footprint, and high replicability offering cost savings. Numerous astrophotonic technologies have been developed to address shortcomings of conventional instruments to date, including for example the development of photonic lanterns, complex aperiodic fiber Bragg gratings, complex beam combiners to enable long baseline interferometry, and laser frequency combs for high precision spectral calibration of spectrometers. Despite these successes, the facility implementation of photonic solutions in astronomical instrumentation is currently limited because of (1) low throughputs from coupling to fibers, coupling fibers to chips, propagation and bend losses, device losses, etc, (2) difficulties with scaling to large channel count devices needed for large bandwidths and high resolutions, and (3) efficient integration of photonics with detectors, to name a few. In this roadmap, we identify 24 areas that need further development. We outline the challenges and advances needed across those areas covering design tools, simulation capabilities, fabrication processes, the need for entirely new components, integration and hybridization and the characterization of devices. To realize these advances the astrophotonics community will have to work cooperatively with industrial partners who have more advanced manufacturing capabilities. With the advances described herein, multi-functional instruments will be realized leading to novel observing capabilities for both ground and space platforms. △ Less

Submitted 1 November, 2023; originally announced November 2023.

Comments: 191 pages, 47 figures. This is the version of the article before peer review or editing, as submitted by an author to J. Phys. Photonics. IOP Publishing Ltd is not responsible for any errors or omissions in this version of the manuscript or any version derived from it. The Version of Record is available online at https://iopscience.iop.org/article/10.1088/2515-7647/ace869/meta

Journal ref: J. Phys. Photonics 5 042501 (2023)

Implicit Adaptive Mesh Refinement for Dispersive Tsunami Propagation

Authors: Marsha J. Berger, Randall J. LeVeque

Abstract: We present an algorithm to solve the dispersive depth-averaged Serre-Green-Naghdi (SGN) equations using patch-based adaptive mesh refinement. These equations require adding additional higher derivative terms to the nonlinear shallow water equations. This has been implemented as a new component of the open source GeoClaw software that is widely used for modeling tsunamis, storm surge, and related h… ▽ More We present an algorithm to solve the dispersive depth-averaged Serre-Green-Naghdi (SGN) equations using patch-based adaptive mesh refinement. These equations require adding additional higher derivative terms to the nonlinear shallow water equations. This has been implemented as a new component of the open source GeoClaw software that is widely used for modeling tsunamis, storm surge, and related hazards, improving its accuracy on shorter wavelength phenomena. We use a formulation that requires solving an elliptic system of equations at each time step, making the method implicit. The adaptive algorithm allows different time steps on different refinement levels, and solves the implicit equations level by level. Computational examples are presented to illustrate the stability and accuracy on a radially symmetric test case and two realistic tsunami modeling problems, including a hypothetical asteroid impact creating a short wavelength tsunami for which dispersive terms are necessary. △ Less

Submitted 19 March, 2024; v1 submitted 11 July, 2023; originally announced July 2023.

Comments: 25 pages, 16 figures, submitted for publication (revised)

MSC Class: 65M50; 65M08; 86A15

Highly-parallelized simulation of a pixelated LArTPC on a GPU

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, C. Alt, A. Alton, R. Alvarez, P. Amedo, J. Anderson , et al. (1282 additional authors not shown)

Abstract: The rapid development of general-purpose computing on graphics processing units (GPGPU) is allowing the implementation of highly-parallelized Monte Carlo simulation chains for particle physics experiments. This technique is particularly suitable for the simulation of a pixelated charge readout for time projection chambers, given the large number of channels that this technology employs. Here we pr… ▽ More The rapid development of general-purpose computing on graphics processing units (GPGPU) is allowing the implementation of highly-parallelized Monte Carlo simulation chains for particle physics experiments. This technique is particularly suitable for the simulation of a pixelated charge readout for time projection chambers, given the large number of channels that this technology employs. Here we present the first implementation of a full microphysical simulator of a liquid argon time projection chamber (LArTPC) equipped with light readout and pixelated charge readout, developed for the DUNE Near Detector. The software is implemented with an end-to-end set of GPU-optimized algorithms. The algorithms have been written in Python and translated into CUDA kernels using Numba, a just-in-time compiler for a subset of Python and NumPy instructions. The GPU implementation achieves a speed up of four orders of magnitude compared with the equivalent CPU version. The simulation of the current induced on $10^3$ pixels takes around 1 ms on the GPU, compared with approximately 10 s on the CPU. The results of the simulation are compared against data from a pixel-readout LArTPC prototype. △ Less

Submitted 28 February, 2023; v1 submitted 19 December, 2022; originally announced December 2022.

Comments: 26 pages, 15 figures

Report number: FERMILAB-PUB-22-926-LBNF

Trion emission from frozen p-n junctions in networks of electrolyte-gated (6,5) single-walled carbon nanotubes

Authors: Abdurrahman AliEl Yumin, Nicolas F. Zorn, Felix J. Berger, Daniel Heimfarth, Jana Zaumseil

Abstract: We demonstrate exciton and charged exciton (trion) electroluminescence from frozen p-n junctions in networks of polymer-sorted, semiconducting (6,5) single-walled carbon nanotubes. Electrolyte-gating with an ionic liquid was employed to achieve injection and accumulation of high densities of holes and electrons in the nanotube network at low applied voltages. Static p-n junctions were formed by co… ▽ More We demonstrate exciton and charged exciton (trion) electroluminescence from frozen p-n junctions in networks of polymer-sorted, semiconducting (6,5) single-walled carbon nanotubes. Electrolyte-gating with an ionic liquid was employed to achieve injection and accumulation of high densities of holes and electrons in the nanotube network at low applied voltages. Static p-n junctions were formed by cooling the devices below the melting point of the ionic liquid while in the ambipolar regime. These frozen junctions showed diode-like rectification and enabled the investigation of electron-hole recombination and near-infrared electroluminescence under controlled conditions. The contributions of exciton and red-shifted trion emission to the electroluminescence spectra were influenced by the initial parameters of the p-n junction formation (balanced or unbalanced) and the applied lateral bias, but did not depend on temperature (30-200 K). The tilted potential profile along the fixed junction and consequently the number of excess carriers within the recombination zone were found to predominantly determine the emission intensity and observed trion to exciton ratio. △ Less

Submitted 16 December, 2022; originally announced December 2022.

Journal ref: Carbon 2023, 202, 547-553

Identification and reconstruction of low-energy electrons in the ProtoDUNE-SP detector

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, C. Alt, A. Alton, R. Alvarez, P. Amedo, J. Anderson , et al. (1235 additional authors not shown)

Abstract: Measurements of electrons from $ν_e$ interactions are crucial for the Deep Underground Neutrino Experiment (DUNE) neutrino oscillation program, as well as searches for physics beyond the standard model, supernova neutrino detection, and solar neutrino measurements. This article describes the selection and reconstruction of low-energy (Michel) electrons in the ProtoDUNE-SP detector. ProtoDUNE-SP is… ▽ More Measurements of electrons from $ν_e$ interactions are crucial for the Deep Underground Neutrino Experiment (DUNE) neutrino oscillation program, as well as searches for physics beyond the standard model, supernova neutrino detection, and solar neutrino measurements. This article describes the selection and reconstruction of low-energy (Michel) electrons in the ProtoDUNE-SP detector. ProtoDUNE-SP is one of the prototypes for the DUNE far detector, built and operated at CERN as a charged particle test beam experiment. A sample of low-energy electrons produced by the decay of cosmic muons is selected with a purity of 95%. This sample is used to calibrate the low-energy electron energy scale with two techniques. An electron energy calibration based on a cosmic ray muon sample uses calibration constants derived from measured and simulated cosmic ray muon events. Another calibration technique makes use of the theoretically well-understood Michel electron energy spectrum to convert reconstructed charge to electron energy. In addition, the effects of detector response to low-energy electron energy scale and its resolution including readout electronics threshold effects are quantified. Finally, the relation between the theoretical and reconstructed low-energy electron energy spectrum is derived and the energy resolution is characterized. The low-energy electron selection presented here accounts for about 75% of the total electron deposited energy. After the addition of lost energy using a Monte Carlo simulation, the energy resolution improves from about 40% to 25% at 50~MeV. These results are used to validate the expected capabilities of the DUNE far detector to reconstruct low-energy electrons. △ Less

Submitted 31 May, 2023; v1 submitted 2 November, 2022; originally announced November 2022.

Comments: 19 pages, 10 figures

Report number: FERMILAB-PUB-22-784, CERN-EP-DRAFT-MISC-2022-008

Journal ref: Phys. Rev. D 107, 092012 (2023)

Reconstruction of interactions in the ProtoDUNE-SP detector with Pandora

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, F. Akbar, B. Ali-Mohammadzadeh, K. Allison, S. Alonso Monsalve, M. AlRashed, C. Alt, A. Alton, R. Alvarez, P. Amedo , et al. (1203 additional authors not shown)

Abstract: The Pandora Software Development Kit and algorithm libraries provide pattern-recognition logic essential to the reconstruction of particle interactions in liquid argon time projection chamber detectors. Pandora is the primary event reconstruction software used at ProtoDUNE-SP, a prototype for the Deep Underground Neutrino Experiment far detector. ProtoDUNE-SP, located at CERN, is exposed to a char… ▽ More The Pandora Software Development Kit and algorithm libraries provide pattern-recognition logic essential to the reconstruction of particle interactions in liquid argon time projection chamber detectors. Pandora is the primary event reconstruction software used at ProtoDUNE-SP, a prototype for the Deep Underground Neutrino Experiment far detector. ProtoDUNE-SP, located at CERN, is exposed to a charged-particle test beam. This paper gives an overview of the Pandora reconstruction algorithms and how they have been tailored for use at ProtoDUNE-SP. In complex events with numerous cosmic-ray and beam background particles, the simulated reconstruction and identification efficiency for triggered test-beam particles is above 80% for the majority of particle type and beam momentum combinations. Specifically, simulated 1 GeV/$c$ charged pions and protons are correctly reconstructed and identified with efficiencies of 86.1$\pm0.6$% and 84.1$\pm0.6$%, respectively. The efficiencies measured for test-beam data are shown to be within 5% of those predicted by the simulation. △ Less

Submitted 17 July, 2023; v1 submitted 29 June, 2022; originally announced June 2022.

Comments: 39 pages, 20 figures. Accepted version. Published version available in Eur. Phys. J. C 83, 618 (2023) https://doi.org/10.1140/epjc/s10052-023-11733-2

Report number: FERMILAB-PUB-22-488-AD-ESH-LBNF-ND-SCD, CERN-EP-DRAFT-MISC-2022-007

Journal ref: Eur. Phys. J. C 83, 618 (2023)

Laboratory constraints on ultralight axion-like particles from precision atomic spectroscopy

Authors: Joshua Berger, Amit Bhoonah

Abstract: Ultralight bosonic dark matter has come under increasing scrutiny as a dark matter candidate that has the potential to resolve puzzles in astronomical observation. We demonstrate that high-precision measurements of time variation in the frequency ratios of atomic transitions achieves leading sensitivity to ultralight axion-like particle dark matter at low masses. These bounds are the first laborat… ▽ More Ultralight bosonic dark matter has come under increasing scrutiny as a dark matter candidate that has the potential to resolve puzzles in astronomical observation. We demonstrate that high-precision measurements of time variation in the frequency ratios of atomic transitions achieves leading sensitivity to ultralight axion-like particle dark matter at low masses. These bounds are the first laboratory-based bounds on this class of dark matter models. We propose further measurements that could enhance sensitivity to ultralight axion-like particles. △ Less

Submitted 6 December, 2023; v1 submitted 13 June, 2022; originally announced June 2022.

Comments: Major revision compared to previous version. New focus on axions

Absolute Quantification of sp$^{3}$ Defects in Semiconducting Single-Wall Carbon Nanotubes by Raman Spectroscopy

Authors: Finn L. Sebastian, Nicolas F. Zorn, Simon Settele, Sebastian Lindenthal, Felix J. Berger, Christoph Bendel, Han Li, Benjamin S. Flavel, Jana Zaumseil

Abstract: The functionalization of semiconducting single-wall carbon nanotubes (SWCNTs) with luminescent sp$^{3}$ defects creates red-shifted emission features in the near-infrared and boosts their photoluminescence quantum yields (PLQYs). While multiple synthetic routes for the selective introduction of sp$^{3}$ defects have been developed, a convenient metric to precisely quantify the number of defects on… ▽ More The functionalization of semiconducting single-wall carbon nanotubes (SWCNTs) with luminescent sp$^{3}$ defects creates red-shifted emission features in the near-infrared and boosts their photoluminescence quantum yields (PLQYs). While multiple synthetic routes for the selective introduction of sp$^{3}$ defects have been developed, a convenient metric to precisely quantify the number of defects on a SWCNT lattice is not available. Here, we present a direct and simple quantification protocol based on a linear correlation of the integrated Raman D/G$^{+}$ signal ratios and defect densities as extracted from PLQY measurements. Corroborated by a statistical analysis of single-nanotube emission spectra at cryogenic temperature, this method enables the quantitative evaluation of sp$^{3}$ defect densities in (6,5) SWCNTs with an error of $\pm$ 3 defects per micrometer and the determination of oscillator strengths for different defect types. The developed protocol requires only standard Raman spectroscopy and is independent of the defect configuration, dispersion solvent and nanotube length. △ Less

Submitted 15 April, 2022; originally announced April 2022.

Journal ref: J. Phys. Chem. Lett. 2022, 13, 3542-3548

Separation of track- and shower-like energy deposits in ProtoDUNE-SP using a convolutional neural network

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, B. Ali-Mohammadzadeh, T. Alion, K. Allison, S. Alonso Monsalve, M. AlRashed, C. Alt, A. Alton, R. Alvarez, P. Amedo, J. Anderson , et al. (1204 additional authors not shown)

Abstract: Liquid argon time projection chamber detector technology provides high spatial and calorimetric resolutions on the charged particles traversing liquid argon. As a result, the technology has been used in a number of recent neutrino experiments, and is the technology of choice for the Deep Underground Neutrino Experiment (DUNE). In order to perform high precision measurements of neutrinos in the det… ▽ More Liquid argon time projection chamber detector technology provides high spatial and calorimetric resolutions on the charged particles traversing liquid argon. As a result, the technology has been used in a number of recent neutrino experiments, and is the technology of choice for the Deep Underground Neutrino Experiment (DUNE). In order to perform high precision measurements of neutrinos in the detector, final state particles need to be effectively identified, and their energy accurately reconstructed. This article proposes an algorithm based on a convolutional neural network to perform the classification of energy deposits and reconstructed particles as track-like or arising from electromagnetic cascades. Results from testing the algorithm on data from ProtoDUNE-SP, a prototype of the DUNE far detector, are presented. The network identifies track- and shower-like particles, as well as Michel electrons, with high efficiency. The performance of the algorithm is consistent between data and simulation. △ Less

Submitted 30 June, 2022; v1 submitted 31 March, 2022; originally announced March 2022.

Comments: 31 pages, 15 figures

Report number: FERMILAB-PUB-22-240-AD-ESH-LBNF-ND-SCD, CERN-EP-2022-077

Journal ref: Eur.Phys.J.C 82 (2022) 10, 903

Scintillation light detection in the 6-m drift-length ProtoDUNE Dual Phase liquid argon TPC

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, B. Ali-Mohammadzadeh, T. Alion, K. Allison, S. Alonso Monsalve, M. AlRashed, C. Alt, A. Alton, R. Alvarez, P. Amedo, J. Anderson , et al. (1202 additional authors not shown)

Abstract: DUNE is a dual-site experiment for long-baseline neutrino oscillation studies, neutrino astrophysics and nucleon decay searches. ProtoDUNE Dual Phase (DP) is a 6x6x6m3 liquid argon time-projection-chamber (LArTPC) that recorded cosmic-muon data at the CERN Neutrino Platform in 2019-2020 as a prototype of the DUNE Far Detector. Charged particles propagating through the LArTPC produce ionization and… ▽ More DUNE is a dual-site experiment for long-baseline neutrino oscillation studies, neutrino astrophysics and nucleon decay searches. ProtoDUNE Dual Phase (DP) is a 6x6x6m3 liquid argon time-projection-chamber (LArTPC) that recorded cosmic-muon data at the CERN Neutrino Platform in 2019-2020 as a prototype of the DUNE Far Detector. Charged particles propagating through the LArTPC produce ionization and scintillation light. The scintillation light signal in these detectors can provide the trigger for non-beam events. In addition, it adds precise timing capabilities and improves the calorimetry measurements. In ProtoDUNE-DP, scintillation and electroluminescence light produced by cosmic muons in the LArTPC is collected by photomultiplier tubes placed up to 7 m away from the ionizing track. In this paper, the ProtoDUNE-DP photon detection system performance is evaluated with a particular focus on the different wavelength shifters, such as PEN and TPB, and the use of Xe-doped LAr, considering its future use in giant LArTPCs. The scintillation light production and propagation processes are analyzed and a comparison of simulation to data is performed, improving understanding of the liquid argon properties △ Less

Submitted 3 June, 2022; v1 submitted 30 March, 2022; originally announced March 2022.

Comments: 31 pages, 29 figures

Report number: CERN-EP-DRAFT-MISC-2022-003; FERMILAB-PUB-22-242-LBNF

Low-Energy Physics in Neutrino LArTPCs

Authors: D. Caratelli, W. Foreman, A. Friedland, S. Gardiner, I. Gil-Botella, G. Karagiorgi, M. Kirby, G. Lehmann Miotto, B. R. Littlejohn, M. Mooney, J. Reichenbacher, A. Sousa, K. Scholberg, J. Yu, T. Yang, S. Andringa, J. Asaadi, T. J. C. Bezerra, F. Capozzi, F. Cavanna, E. Church, A. Himmel, T. Junk, J. Klein, I. Lepetic , et al. (264 additional authors not shown)

Abstract: In this white paper, we outline some of the scientific opportunities and challenges related to detection and reconstruction of low-energy (less than 100 MeV) signatures in liquid argon time-projection chamber (LArTPC) detectors. Key takeaways are summarized as follows. 1) LArTPCs have unique sensitivity to a range of physics and astrophysics signatures via detection of event features at and below… ▽ More In this white paper, we outline some of the scientific opportunities and challenges related to detection and reconstruction of low-energy (less than 100 MeV) signatures in liquid argon time-projection chamber (LArTPC) detectors. Key takeaways are summarized as follows. 1) LArTPCs have unique sensitivity to a range of physics and astrophysics signatures via detection of event features at and below the few tens of MeV range. 2) Low-energy signatures are an integral part of GeV-scale accelerator neutrino interaction final states, and their reconstruction can enhance the oscillation physics sensitivities of LArTPC experiments. 3) BSM signals from accelerator and natural sources also generate diverse signatures in the low-energy range, and reconstruction of these signatures can increase the breadth of BSM scenarios accessible in LArTPC-based searches. 4) Neutrino interaction cross sections and other nuclear physics processes in argon relevant to sub-hundred-MeV LArTPC signatures are poorly understood. Improved theory and experimental measurements are needed. Pion decay-at-rest sources and charged particle and neutron test beams are ideal facilities for experimentally improving this understanding. 5) There are specific calibration needs in the low-energy range, as well as specific needs for control and understanding of radiological and cosmogenic backgrounds. 6) Novel ideas for future LArTPC technology that enhance low-energy capabilities should be explored. These include novel charge enhancement and readout systems, enhanced photon detection, low radioactivity argon, and xenon do**. 7) Low-energy signatures, whether steady-state or part of a supernova burst or larger GeV-scale event topology, have specific triggering, DAQ and reconstruction requirements that must be addressed outside the scope of conventional GeV-scale data collection and analysis pathways. △ Less

Submitted 1 March, 2022; originally announced March 2022.

Comments: Contribution to Snowmass 2021

Estimation of the thermal properties of an historic building wall by combining Modal Identification Method and Optimal Experiment Design

Authors: Julien Berger, Benjamin Kadoch

Abstract: The estimation of wall thermal properties by \emph{in situ} measurement enables to increase the reliability of the model predictions for building energy efficiency. Nevertheless, retrieving the unknown parameters has an important computational cost. Indeed, several computations of the heat transfer problem are required to identify these thermal properties. To handle this drawback, an innovative ap… ▽ More The estimation of wall thermal properties by \emph{in situ} measurement enables to increase the reliability of the model predictions for building energy efficiency. Nevertheless, retrieving the unknown parameters has an important computational cost. Indeed, several computations of the heat transfer problem are required to identify these thermal properties. To handle this drawback, an innovative approach is investigated. The first step is to search the optimal experiment design among the sequence of observation of several months. A reduced sequence of observations of three days is identified which guarantees to estimate the parameter with the maximum accuracy. Moreover, the inverse problem is only solved for this short sequence. To decrease further the computational efforts, a reduced order model based on the modal identification method is employed. This \emph{a posteriori} model reduction method approximates the solution with a lower degree of freedom. The whole methodology is illustrated to estimate the thermal diffusivity of an historical building that has been monitored with temperature sensors for several months. The computational efforts is cut by five. The estimated parameter improves the reliability of the predictions of the wall thermal efficiency. △ Less

Submitted 17 November, 2021; originally announced November 2021.

Searching an optimal experiment observation sequence to estimate the thermal properties of a multilayer wall under real climate conditions

Authors: Ainagul Jumabekova, Julien Berger, Aurélie Foucquier, George S. Dulikravich

Abstract: The \emph{in situ} estimation of the thermal properties of existing building wall materials is a computationally expensive procedure. Its cost is highly proportional to the duration of measurements. To decrease the computational cost a methodology using a D-optimum criterion to select an optimal experiment duration is proposed. This criterion allows to accurately estimate the thermal properties of… ▽ More The \emph{in situ} estimation of the thermal properties of existing building wall materials is a computationally expensive procedure. Its cost is highly proportional to the duration of measurements. To decrease the computational cost a methodology using a D-optimum criterion to select an optimal experiment duration is proposed. This criterion allows to accurately estimate the thermal properties of the wall using a reduced measurement plan. The methodology is applied to estimate the thermal conductivity of the three-layer wall of a historical building in France. Three different experiment sequences (one, three and seven days) and three spatial distributions of the thermal conductivity are investigated. Then using the optimal duration of observations the thermal conductivity is estimated using the hybrid optimization method. Results show a significant reduction of computational time; and reliable simulation of physical phenomena using the estimated values. △ Less

Submitted 17 November, 2021; originally announced November 2021.

An efficient sensitivity analysis for energy performance of a building envelope: a continuous derivative based approach

Authors: Ainagul Jumabekova, Julien Berger, Aurélie Foucquier

Abstract: Within the framework of building energy assessment, this article proposes to use a derivative based sensitivity analysis of heat transfer models in a building envelope. Two, global and local, estimators are obtained at low computational cost, to evaluate the influence of the parameters on the model outputs. Ranking of these estimators values allows to reduce the number of model unknown parameters… ▽ More Within the framework of building energy assessment, this article proposes to use a derivative based sensitivity analysis of heat transfer models in a building envelope. Two, global and local, estimators are obtained at low computational cost, to evaluate the influence of the parameters on the model outputs. Ranking of these estimators values allows to reduce the number of model unknown parameters by excluding non-significant parameters. A comparison with variance and regression-based methods is carried out and the results highlight the satisfactory accuracy of the continuous-based approach. Moreover, for the carried investigations the approach is $100$ times faster compared to the variance-based methods. A case study applies the method to a real-world building wall. The sensitivity of the thermal loads to local or global variations of the wall thermal is investigated. Additionally, a case study of wall with window is analyzed. △ Less

Submitted 17 November, 2021; originally announced November 2021.

An efficient two-dimensional heat transfer model for building envelopes

Authors: Julien Berger, Suelen Gasparin, Walter Mazuroski, Nathan Mendes

Abstract: A two-dimensional model is proposed for energy efficiency assessment through the simulation of heat transfer in building envelopes, considering the influence of the surrounding environment. The model is based on the \DF ~approach that provides an explicit scheme with a relaxed stability condition. The model is first validated using an analytical solution and then compared to three other standard s… ▽ More A two-dimensional model is proposed for energy efficiency assessment through the simulation of heat transfer in building envelopes, considering the influence of the surrounding environment. The model is based on the \DF ~approach that provides an explicit scheme with a relaxed stability condition. The model is first validated using an analytical solution and then compared to three other standard schemes. Results show that the proposed model offers a good compromise in terms of high accuracy and reduced computational efforts. Then, a more complex case study is investigated, considering non-uniform shading effects due to the neighboring buildings. In addition, the surface heat transfer coefficient varies with wind velocity and height, which imposes an addition non-uniform boundary condition. After showing the reliability of the model prediction, a comparison over almost $120$ cities in France is carried out between the two- and the one-dimensional approaches of the current building simulation programs. Important discrepancies are observed for regions with high magnitudes of solar radiation and wind velocity. Last, a sensitivity analysis is carried out using a derivative-based approach. It enables to assess the variability of the solution according to the modeling of the two-dimensional boundary conditions. Moreover, the proposed model computes efficiently the solution and its sensitivity to the modeling of the urban environment. △ Less

Submitted 17 November, 2021; originally announced November 2021.

Dimensionless formulation and similarity to assess the main phenomena of heat and mass transfer in building porous material

Authors: Julien Berger, Clemence Legros, Madina Abdykarim

Abstract: Within the environmental context, several tools based on simulations have been proposed to analyze the physical phenomena of heat and mass transfer in porous materials. However, it is still an open challenge to propose tools that do not require to perform computations to catch the dominant processes. Thus, this article proposes to explore advantages of using a dimensionless analysis by scaling the… ▽ More Within the environmental context, several tools based on simulations have been proposed to analyze the physical phenomena of heat and mass transfer in porous materials. However, it is still an open challenge to propose tools that do not require to perform computations to catch the dominant processes. Thus, this article proposes to explore advantages of using a dimensionless analysis by scaling the governing equations of heat and mass transfer. Proposed methodology introduces dimensionless numbers and their nonlinear distortions. The relevant investigation enables to enhance the preponderant phenomena to \emph{(i)} compare different categories of materials, \emph{(ii)} evaluate the competition between heat and mass transfer for each material or \emph{(iii)} describe the transfer in multi-layered wall configurations. It also permits to define hygrothermal kinetic, geometric and dynamic similarities among different physical materials. Equivalent systems can be characterized in the framework of experimental or wall designs. Three cases are presented for similarity studies in terms of \emph{(i)} equivalent material length, \emph{(ii)} time of heat and mass transfer and \emph{(iii)} experimental configurations. All these advantages are illustrated in the given article considering $49$ building materials separated in $7$ categories. △ Less

Submitted 17 November, 2021; originally announced November 2021.

Towards Adaptive Simulations of Dispersive Tsunami Propagation from an Asteroid Impact

Authors: Marsha J. Berger, Randall J. LeVeque

Abstract: The long-term goal of this work is the development of high-fidelity simulation tools for dispersive tsunami propagation. A dispersive model is especially important for short wavelength phenomena such as an asteroid impact into the ocean, and is also important in modeling other events where the simpler shallow water equations are insufficient. Adaptive simulations are crucial to bridge the scales f… ▽ More The long-term goal of this work is the development of high-fidelity simulation tools for dispersive tsunami propagation. A dispersive model is especially important for short wavelength phenomena such as an asteroid impact into the ocean, and is also important in modeling other events where the simpler shallow water equations are insufficient. Adaptive simulations are crucial to bridge the scales from deep ocean to inundation, but have difficulties with the implicit system of equations that results from dispersive models. We propose a fractional step scheme that advances the solution on separate patches with different spatial resolutions and time steps. We show a simulation with 7 levels of adaptive meshes and onshore inundation resulting from a simulated asteroid impact off the coast of Washington. Finally, we discuss a number of open research questions that need to be resolved for high quality simulations. △ Less

Submitted 29 September, 2021; originally announced October 2021.

Comments: 16 pages, 5 figures, submitted to Proc. International Congress of Mathematicians, 2022

MSC Class: 65M50; 76B15

Low exposure long-baseline neutrino oscillation sensitivity of the DUNE experiment

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, D. Adams, M. Adinolfi, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, B. Ali-Mohammadzadeh, T. Alion, K. Allison, S. Alonso Monsalve, M. AlRashed, C. Alt, A. Alton, P. Amedo, J. Anderson, C. Andreopoulos, M. Andreotti , et al. (1132 additional authors not shown)

Abstract: The Deep Underground Neutrino Experiment (DUNE) will produce world-leading neutrino oscillation measurements over the lifetime of the experiment. In this work, we explore DUNE's sensitivity to observe charge-parity violation (CPV) in the neutrino sector, and to resolve the mass ordering, for exposures of up to 100 kiloton-megawatt-years (kt-MW-yr). The analysis includes detailed uncertainties on t… ▽ More The Deep Underground Neutrino Experiment (DUNE) will produce world-leading neutrino oscillation measurements over the lifetime of the experiment. In this work, we explore DUNE's sensitivity to observe charge-parity violation (CPV) in the neutrino sector, and to resolve the mass ordering, for exposures of up to 100 kiloton-megawatt-years (kt-MW-yr). The analysis includes detailed uncertainties on the flux prediction, the neutrino interaction model, and detector effects. We demonstrate that DUNE will be able to unambiguously resolve the neutrino mass ordering at a 3$σ$ (5$σ$) level, with a 66 (100) kt-MW-yr far detector exposure, and has the ability to make strong statements at significantly shorter exposures depending on the true value of other oscillation parameters. We also show that DUNE has the potential to make a robust measurement of CPV at a 3$σ$ level with a 100 kt-MW-yr exposure for the maximally CP-violating values $δ_{\rm CP}} = \pmπ/2$. Additionally, the dependence of DUNE's sensitivity on the exposure taken in neutrino-enhanced and antineutrino-enhanced running is discussed. An equal fraction of exposure taken in each beam mode is found to be close to optimal when considered over the entire space of interest. △ Less

Submitted 3 September, 2021; originally announced September 2021.

Report number: FERMILAB-PUB-21-391-ND

Design, construction and operation of the ProtoDUNE-SP Liquid Argon TPC

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, D. Adams, M. Adinolfi, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Ali-Mohammadzadeh, T. Alion, K. Allison, S. Alonso Monsalve, M. Alrashed, C. Alt, A. Alton, P. Amedo, J. Anderson, C. Andreopoulos, M. Andreotti, M. P. Andrews , et al. (1158 additional authors not shown)

Abstract: The ProtoDUNE-SP detector is a single-phase liquid argon time projection chamber (LArTPC) that was constructed and operated in the CERN North Area at the end of the H4 beamline. This detector is a prototype for the first far detector module of the Deep Underground Neutrino Experiment (DUNE), which will be constructed at the Sandford Underground Research Facility (SURF) in Lead, South Dakota, USA.… ▽ More The ProtoDUNE-SP detector is a single-phase liquid argon time projection chamber (LArTPC) that was constructed and operated in the CERN North Area at the end of the H4 beamline. This detector is a prototype for the first far detector module of the Deep Underground Neutrino Experiment (DUNE), which will be constructed at the Sandford Underground Research Facility (SURF) in Lead, South Dakota, USA. The ProtoDUNE-SP detector incorporates full-size components as designed for DUNE and has an active volume of $7\times 6\times 7.2$~m$^3$. The H4 beam delivers incident particles with well-measured momenta and high-purity particle identification. ProtoDUNE-SP's successful operation between 2018 and 2020 demonstrates the effectiveness of the single-phase far detector design. This paper describes the design, construction, assembly and operation of the detector components. △ Less

Submitted 23 September, 2021; v1 submitted 4 August, 2021; originally announced August 2021.

Calibration technique for suppressing residual etalon artifacts in slit-averaged Raman spectroscopy

Authors: Christine Massie, Keren Chen, Andrew J. Berger

Abstract: Back-illuminated charged-coupled device (BI-CCD) arrays increase quantum efficiency but also amplify etaloning, a multiplicative, wavelength-dependent fixed-pattern effect. When spectral data from hundreds of BI-CCD rows are combined, the averaged spectrum will generally appear etalon-free. This can mask substantial etaloning at the row level, even if the BI-CCD has been treated to suppress the ef… ▽ More Back-illuminated charged-coupled device (BI-CCD) arrays increase quantum efficiency but also amplify etaloning, a multiplicative, wavelength-dependent fixed-pattern effect. When spectral data from hundreds of BI-CCD rows are combined, the averaged spectrum will generally appear etalon-free. This can mask substantial etaloning at the row level, even if the BI-CCD has been treated to suppress the effect. This Note compares two methods of etalon correction, one with simple averaging and one with row-by-row calibration using a fluorescence standard. Two BI-CCD arrays, both roughened by the supplier to reduce etaloning, were used to acquire Raman spectra of murine bone specimens. For one array, etaloning was the dominant source of noise under the exposure conditions chosen, even for the averaged spectrum across all rows; near-infrared-excited Raman peaks were noticeably affected. In this case, row-by-row calibration improved the spectral quality of the average spectrum. The other CCD's performance was shot-noise limited and therefore received no benefit from the extra calibration. The different results highlight the importance of checking for and correcting row-level fixed pattern when measuring weak Raman signals in the presence of a large fluorescence background. △ Less

Submitted 23 July, 2021; originally announced July 2021.

Charge Transport in and Electroluminescence from sp$^{3}$-Functionalized Carbon Nanotube Networks

Authors: Nicolas F. Zorn, Felix J. Berger, Jana Zaumseil

Abstract: The controlled covalent functionalization of semiconducting single-walled carbon nanotubes (SWCNTs) with luminescent sp$^{3}$ defects leads to additional narrow and tunable photoluminescence features in the near-infrared and even enables single-photon emission at room temperature, thus strongly expanding their application potential. However, the successful integration of sp$^{3}$-functionalized SW… ▽ More The controlled covalent functionalization of semiconducting single-walled carbon nanotubes (SWCNTs) with luminescent sp$^{3}$ defects leads to additional narrow and tunable photoluminescence features in the near-infrared and even enables single-photon emission at room temperature, thus strongly expanding their application potential. However, the successful integration of sp$^{3}$-functionalized SWCNTs in optoelectronic devices with efficient defect state electroluminescence not only requires control over their emission properties but also a detailed understanding of the impact of functionalization on their electrical performance, especially in dense networks. Here, we demonstrate ambipolar, light-emitting field-effect transistors based on networks of pristine and functionalized polymer-sorted (6,5) SWCNTs. We investigate the influence of sp$^{3}$ defects on charge transport by employing electroluminescence and (charge-modulated) photoluminescence spectroscopy combined with temperature-dependent current-voltage measurements. We find that sp$^{3}$-functionalized SWCNTs actively participate in charge transport within the network as mobile carriers efficiently sample the sp$^{3}$ defects, which act as shallow trap states. While both hole and electron mobilities decrease with increasing degree of functionalization, the transistors remain fully operational, showing electroluminescence from the defect states that can be tuned by the defect density. △ Less

Submitted 30 May, 2021; originally announced May 2021.

Comments: ACS Nano 2021

Charge Transfer from Photoexcited Semiconducting Single-Walled Carbon Nanotubes to Wide-Bandgap Wrap** Polymer

Authors: Zhuoran Kuang, Felix J. Berger, Jose Luis Pérez Lustres, Nikolaus Wollscheid, Han Li, Jan Lüttgens, Merve Balcı Leinen, Benjamin S. Flavel, Jana Zaumseil, Tiago Buckup

Abstract: As narrow optical bandgap materials, semiconducting single-walled carbon nanotubes (SWCNTs) are rarely regarded as charge donors in photoinduced charge-transfer (PCT) reactions. However, the unique band structure and unusual exciton dynamics of SWCNTs add more possibilities to the classical PCT mechanism.In this work, we demonstrate PCT from photoexcited semiconducting (6,5) SWCNTs to a wide-bandg… ▽ More As narrow optical bandgap materials, semiconducting single-walled carbon nanotubes (SWCNTs) are rarely regarded as charge donors in photoinduced charge-transfer (PCT) reactions. However, the unique band structure and unusual exciton dynamics of SWCNTs add more possibilities to the classical PCT mechanism.In this work, we demonstrate PCT from photoexcited semiconducting (6,5) SWCNTs to a wide-bandgap wrap** poly-[(9,9-dioctylfluorenyl-2,7-diyl)-alt-(6,6')-(2,2'-bipyridine)] (PFO-BPy) via femtosecond transient absorption spectroscopy. By monitoring the spectral dynamics of the SWCNT polaron, we show that charge transfer from photoexcited SWCNTs to PFO-BPy can be driven not only by the energetically favorable E33 transition but also by the energetically unfavorable E22 excitation under high pump fluence. This unusual PCT from narrow-bandgap SWCNTs toward a wide-bandgap polymer originates from the up-converted high-energy excitonic state (E33 or higher) that is promoted by the Auger recombination of excitons and charge carriers in SWCNTs. These insights provide new pathways for charge separation in SWCNT-based photodetectors and photovoltaic cells. △ Less

Submitted 5 May, 2021; originally announced May 2021.

Journal ref: J. Phys. Chem. C 2021, 125, 8125-8136

Synthetic Control over the Binding Configuration of Luminescent sp3-Defects in Single-Walled Carbon Nanotubes

Authors: S. Settele, F. J. Berger, S. Lindenthal, S. Zhao, A. A. El Yumin, N. F. Zorn, A. Asyuda, M. Zharnikov, A. Högele, J. Zaumseil

Abstract: The controlled functionalization of single-walled carbon nanotubes with luminescent sp3-defects has created the potential to employ them as quantum-light sources in the near-infrared. For that, it is crucial to control their spectral diversity. The emission wavelength is determined by the binding configuration of the defects rather than the molecular structure of the attached groups. However, curr… ▽ More The controlled functionalization of single-walled carbon nanotubes with luminescent sp3-defects has created the potential to employ them as quantum-light sources in the near-infrared. For that, it is crucial to control their spectral diversity. The emission wavelength is determined by the binding configuration of the defects rather than the molecular structure of the attached groups. However, current functionalization methods produce a variety of binding configurations and thus emission wavelengths. We introduce a simple reaction protocol for the creation of only one type of luminescent defect in polymer-sorted (6,5) nanotubes, which is more red-shifted and exhibits longer photoluminescence lifetimes than the commonly obtained binding configurations. We demonstrate single-photon emission at room temperature and expand this functionalization to other polymer-wrapped nanotubes with emission further in the near-infrared. As the selectivity of the reaction with various aniline derivatives depends on the presence of an organic base we propose nucleophilic addition as the reaction mechanism. △ Less

Submitted 5 May, 2021; originally announced May 2021.

Journal ref: Nat. Commun. 2021, 12, 2119

A New Assessment Statement for the Trinity Nuclear Test, 75 Years Later

Authors: H. D. Selby, S. K. Hanson, D. Meininger, W. J. Oldham, W. S. Kinman, J. L. Miller, S. D. Reilly, A. M. Wende, J. L. Berger, J. Inglis, A. D. Pollington, C. R. Waidmann, R. A. Meade, K. L. Buescher, J. R. Gattiker, S. A. Vander Wiel, P. W. Marcy

Abstract: New measurement and assessment techniques have been applied to the radiochemical re-evaluation of the Trinity Event. Thirteen trinitite samples were dissolved and analyzed using a combination of traditional decay counting methods and the mass spectrometry techniques. The resulting data were assessed using advanced simulation tools to afford a final yield determination of $24.8 \pm 2$ kilotons TNT… ▽ More New measurement and assessment techniques have been applied to the radiochemical re-evaluation of the Trinity Event. Thirteen trinitite samples were dissolved and analyzed using a combination of traditional decay counting methods and the mass spectrometry techniques. The resulting data were assessed using advanced simulation tools to afford a final yield determination of $24.8 \pm 2$ kilotons TNT equivalent, substantially higher than the previous DOE released value of 21 kilotons. This article is intended to complement the work of Susan Hanson and Warren Oldham, seen elsewhere in this issue. △ Less

Submitted 10 March, 2021; originally announced March 2021.

Report number: LA-UR-21-20675

A flexible anatomical set of mechanical models for the organ of Corti

Authors: Jorge Berger, Jacob Rubinstein

Abstract: We built a flexible platform to study the mechanical operation of the organ of Corti (OoC) in the transduction of basilar membrane (BM) vibrations to oscillations of an inner hair cell bundle (IHB). The anatomical components that we consider are the outer hair cells (OHCs), the outer hair cell bundles, Deiters cells, Hensen cells, the IHB and various sections of the reticular lamina. In each of th… ▽ More We built a flexible platform to study the mechanical operation of the organ of Corti (OoC) in the transduction of basilar membrane (BM) vibrations to oscillations of an inner hair cell bundle (IHB). The anatomical components that we consider are the outer hair cells (OHCs), the outer hair cell bundles, Deiters cells, Hensen cells, the IHB and various sections of the reticular lamina. In each of the components we apply Newton's equations of motion. The components are coupled to each other and are further coupled to the endolymph fluid motion in the subtectorial gap. This allows us to obtain the forces acting on the IHB, and thus study its motion as a function of the parameters of the different components. Some of the components include a nonlinear mechanical response. We found that slight bending of the apical ends of the OHCs can have a significant impact on the passage of motion from the BM to the IHB, including critical oscillator behaviour. In particular, our model implies that the components of the OoC could cooperate to enhance frequency selectivity, amplitude compression and signal to noise ratio in the passage from the BM to the IHB. Since the model is modular, it is easy to modify the assumptions and parameters for each component. △ Less

Submitted 10 February, 2021; originally announced February 2021.

Comments: A similar version was posted in bioRxiv

Journal ref: R. Soc. Open Sci. 8 (2021) 210016

Revealing the internal luminescence quantum efficiency of perovskite films via accurate quantification of photon recycling

Authors: Paul Fassl, Vincent Lami, Felix J. Berger, Lukas M. Falk, Jana Zaumseil, Bryce S. Richards, Ian A. Howard, Yana Vaynzof, Ulrich W. Paetzold

Abstract: The internal luminescence quantum efficiency ($Q_\mathrm{i}^\mathrm{lum}$) provides an excellent assessment of the optoelectronic quality of semiconductors. To determine $Q_\mathrm{i}^\mathrm{lum}$ of perovskite films from the experimentally accessible external luminescence quantum efficiency ($Q_\mathrm{e}^\mathrm{lum}$) it is essential to account for photon recycling, and this requires knowledge… ▽ More The internal luminescence quantum efficiency ($Q_\mathrm{i}^\mathrm{lum}$) provides an excellent assessment of the optoelectronic quality of semiconductors. To determine $Q_\mathrm{i}^\mathrm{lum}$ of perovskite films from the experimentally accessible external luminescence quantum efficiency ($Q_\mathrm{e}^\mathrm{lum}$) it is essential to account for photon recycling, and this requires knowledge of the photon escape probability ($p_\mathrm{e}$). Here, we establish an analysis procedure based on a curve fitting model that accurately determines $p_\mathrm{e}$ of perovskite films from photoluminescence (PL) spectra measured with a confocal microscope and an integrating sphere setup. We show that scattering-induced outcoupling of initially-trapped PL explains commonly observed red-shifted and broadened PL spectral shapes and leads to $p_\mathrm{e}$ being more than 10% higher in absolute terms compared to earlier assumptions. Applying our model to CH$_3$NH$_3$PbI$_3$ films with exceptionally high $Q_\mathrm{e}^\mathrm{lum}$ up to 47.4% sets a real benchmark for $Q_\mathrm{i}^\mathrm{lum}$ at $78.0 \pm 0.5\%$, revealing there is beyond a factor of two more scope for reducing non-radiative recombination than previously thought. △ Less

Submitted 24 October, 2020; originally announced October 2020.

Journal ref: Matter 4 (2021) 1391-1412

Potential energy surfaces without unphysical discontinuities: the Coulomb-hole plus screened exchange approach

Authors: J. Arjan Berger, Pierre-François Loos, Pina Romaniello

Abstract: In this work we show the advantages of using the Coulomb-hole plus screened-exchange (COHSEX) approach in the calculation of potential energy surfaces. In particular, we demonstrate that, unlike perturbative $GW$ and partial self-consistent $GW$ approaches, such as eigenvalue-self-consistent $GW$ and quasi-particle self-consistent $GW$, the COHSEX approach yields smooth potential energy surfaces w… ▽ More In this work we show the advantages of using the Coulomb-hole plus screened-exchange (COHSEX) approach in the calculation of potential energy surfaces. In particular, we demonstrate that, unlike perturbative $GW$ and partial self-consistent $GW$ approaches, such as eigenvalue-self-consistent $GW$ and quasi-particle self-consistent $GW$, the COHSEX approach yields smooth potential energy surfaces without irregularities and discontinuities. Moreover, we show that the ground-state potential energy surfaces (PES) obtained from the Bethe-Salpeter equation, within the adiabatic connection fluctuation dissipation theorem, built with quasi-particle energies obtained from perturbative COHSEX on top of Hartree-Fock (BSE@COHSEX@HF) yield very accurate results for diatomic molecules close to their equilibrium distance. When self-consistent COHSEX quasi-particle energies and orbitals are used to build the BSE equation the results become independent of the starting point. We show that self-consistency worsens the total energies but improves the equilibrium distances with respect to BSE@COHSEX@HF. This is mainly due to changes in the screening inside the BSE. △ Less

Submitted 16 November, 2020; v1 submitted 27 August, 2020; originally announced August 2020.

Journal ref: J. Chem. Theory Comput. 17, 191 (2021)

Supernova Neutrino Burst Detection with the Deep Underground Neutrino Experiment

Authors: DUNE collaboration, B. Abi, R. Acciarri, M. A. Acero, G. Adamov, D. Adams, M. Adinolfi, Z. Ahmad, J. Ahmed, T. Alion, S. Alonso Monsalve, C. Alt, J. Anderson, C. Andreopoulos, M. P. Andrews, F. Andrianala, S. Andringa, A. Ankowski, M. Antonova, S. Antusch, A. Aranda-Fernandez, A. Ariga, L. O. Arnold, M. A. Arroyave, J. Asaadi , et al. (949 additional authors not shown)

Abstract: The Deep Underground Neutrino Experiment (DUNE), a 40-kton underground liquid argon time projection chamber experiment, will be sensitive to the electron-neutrino flavor component of the burst of neutrinos expected from the next Galactic core-collapse supernova. Such an observation will bring unique insight into the astrophysics of core collapse as well as into the properties of neutrinos. The gen… ▽ More The Deep Underground Neutrino Experiment (DUNE), a 40-kton underground liquid argon time projection chamber experiment, will be sensitive to the electron-neutrino flavor component of the burst of neutrinos expected from the next Galactic core-collapse supernova. Such an observation will bring unique insight into the astrophysics of core collapse as well as into the properties of neutrinos. The general capabilities of DUNE for neutrino detection in the relevant few- to few-tens-of-MeV neutrino energy range will be described. As an example, DUNE's ability to constrain the $ν_e$ spectral parameters of the neutrino burst will be considered. △ Less

Submitted 29 May, 2021; v1 submitted 15 August, 2020; originally announced August 2020.

Comments: 29 pages, 17 figures; paper based on DUNE Technical Design Report. arXiv admin note: substantial text overlap with arXiv:2002.03005

Report number: FERMILAB-PUB-20-380-LBNF

First results on ProtoDUNE-SP liquid argon time projection chamber performance from a beam test at the CERN Neutrino Platform

Authors: DUNE Collaboration, B. Abi, A. Abed Abud, R. Acciarri, M. A. Acero, G. Adamov, M. Adamowski, D. Adams, P. Adrien, M. Adinolfi, Z. Ahmad, J. Ahmed, T. Alion, S. Alonso Monsalve, C. Alt, J. Anderson, C. Andreopoulos, M. P. Andrews, F. Andrianala, S. Andringa, A. Ankowski, M. Antonova, S. Antusch, A. Aranda-Fernandez, A. Ariga , et al. (970 additional authors not shown)

Abstract: The ProtoDUNE-SP detector is a single-phase liquid argon time projection chamber with an active volume of $7.2\times 6.0\times 6.9$ m$^3$. It is installed at the CERN Neutrino Platform in a specially-constructed beam that delivers charged pions, kaons, protons, muons and electrons with momenta in the range 0.3 GeV$/c$ to 7 GeV/$c$. Beam line instrumentation provides accurate momentum measurements… ▽ More The ProtoDUNE-SP detector is a single-phase liquid argon time projection chamber with an active volume of $7.2\times 6.0\times 6.9$ m$^3$. It is installed at the CERN Neutrino Platform in a specially-constructed beam that delivers charged pions, kaons, protons, muons and electrons with momenta in the range 0.3 GeV$/c$ to 7 GeV/$c$. Beam line instrumentation provides accurate momentum measurements and particle identification. The ProtoDUNE-SP detector is a prototype for the first far detector module of the Deep Underground Neutrino Experiment, and it incorporates full-size components as designed for that module. This paper describes the beam line, the time projection chamber, the photon detectors, the cosmic-ray tagger, the signal processing and particle reconstruction. It presents the first results on ProtoDUNE-SP's performance, including noise and gain measurements, $dE/dx$ calibration for muons, protons, pions and electrons, drift electron lifetime measurements, and photon detector noise, signal sensitivity and time resolution measurements. The measured values meet or exceed the specifications for the DUNE far detector, in several cases by large margins. ProtoDUNE-SP's successful operation starting in 2018 and its production of large samples of high-quality data demonstrate the effectiveness of the single-phase far detector design. △ Less

Submitted 3 June, 2021; v1 submitted 13 July, 2020; originally announced July 2020.

Comments: 93 pages, 70 figures

Report number: FERMILAB-PUB-20-059-AD-ESH-LBNF-ND-SCD, CERN-EP-2020-125

Journal ref: JINST 15 (2020) P12004

Mathematical model for the thermal enhancement of radiation response: Thermodynamic approach

Authors: Adriana M. De Mendoza, Soňa Michlíková, Johann Berger, Jens Karschau, Leoni A. Kunz-Schughart, Damian D. McLeod

Abstract: Radiotherapy can effectively kill malignant cells, but the doses required to cure cancer patients may inflict severe collateral damage to adjacent healthy tissues. Hyperthermia (HT) is a promising option to improve the outcome of radiation treatment (RT) and is increasingly applied in hospital. However, the synergistic effect of simultaneous thermoradiotherapy is not well understood yet, while its… ▽ More Radiotherapy can effectively kill malignant cells, but the doses required to cure cancer patients may inflict severe collateral damage to adjacent healthy tissues. Hyperthermia (HT) is a promising option to improve the outcome of radiation treatment (RT) and is increasingly applied in hospital. However, the synergistic effect of simultaneous thermoradiotherapy is not well understood yet, while its mathematical modelling is essential for treatment planning. To better understand this synergy, we propose a theoretical model in which the thermal enhancement ratio (TER) is explained by the fraction of cells being radiosensitised by the infliction of sublethal damage through mild HT. Further damage finally kills the cell or inhibits its proliferation in a non-reversible process. We suggest the TER to be proportional to the energy invested in the sensitisation, which is modelled as a simple rate process. Assuming protein denaturation as the main driver of HT-induced sublethal damage and considering the temperature dependence of the heat capacity of cellular proteins, the sensitisation rates were found to depend exponentially on temperature; in agreement with previous empirical observations. Our predictions well reproduce experimental data from in-vitro and in-vivo studies, explaining the thermal modulation of cellular radioresponse for simultaneous thermoradiotherapy. △ Less

Submitted 10 September, 2020; v1 submitted 1 July, 2020; originally announced July 2020.

Comments: 12 pages, 3 figures, 2 table, 60 references

Neutrino interaction classification with a convolutional neural network in the DUNE far detector

Authors: DUNE Collaboration, B. Abi, R. Acciarri, M. A. Acero, G. Adamov, D. Adams, M. Adinolfi, Z. Ahmad, J. Ahmed, T. Alion, S. Alonso Monsalve, C. Alt, J. Anderson, C. Andreopoulos, M. P. Andrews, F. Andrianala, S. Andringa, A. Ankowski, M. Antonova, S. Antusch, A. Aranda-Fernandez, A. Ariga, L. O. Arnold, M. A. Arroyave, J. Asaadi , et al. (951 additional authors not shown)

Abstract: The Deep Underground Neutrino Experiment is a next-generation neutrino oscillation experiment that aims to measure $CP$-violation in the neutrino sector as part of a wider physics program. A deep learning approach based on a convolutional neural network has been developed to provide highly efficient and pure selections of electron neutrino and muon neutrino charged-current interactions. The electr… ▽ More The Deep Underground Neutrino Experiment is a next-generation neutrino oscillation experiment that aims to measure $CP$-violation in the neutrino sector as part of a wider physics program. A deep learning approach based on a convolutional neural network has been developed to provide highly efficient and pure selections of electron neutrino and muon neutrino charged-current interactions. The electron neutrino (antineutrino) selection efficiency peaks at 90% (94%) and exceeds 85% (90%) for reconstructed neutrino energies between 2-5 GeV. The muon neutrino (antineutrino) event selection is found to have a maximum efficiency of 96% (97%) and exceeds 90% (95%) efficiency for reconstructed neutrino energies above 2 GeV. When considering all electron neutrino and antineutrino interactions as signal, a selection purity of 90% is achieved. These event selections are critical to maximize the sensitivity of the experiment to $CP$-violating effects. △ Less

Submitted 10 November, 2020; v1 submitted 26 June, 2020; originally announced June 2020.

Comments: 39 pages, 11 figures

Journal ref: Phys. Rev. D 102, 092003 (2020)

Clifford boundary conditions: a simple direct-sum evaluation of Madelung constants

Authors: Nicolas Tavernier, Gian Luigi Bendazzoli, Véronique Brumas, Stefano Evangelisti, J. A. Berger

Abstract: We propose a simple direct-sum method for the efficient evaluation of lattice sums in periodic solids. It consists of two main principles: i) the creation of a supercell that has the topology of a Clifford torus, which is a flat, finite and border-less manifold; ii) the renormalization of the distance between two points on the Clifford torus by defining it as the Euclidean distance in the embeddin… ▽ More We propose a simple direct-sum method for the efficient evaluation of lattice sums in periodic solids. It consists of two main principles: i) the creation of a supercell that has the topology of a Clifford torus, which is a flat, finite and border-less manifold; ii) the renormalization of the distance between two points on the Clifford torus by defining it as the Euclidean distance in the embedding space of the Clifford torus. Our approach does not require any integral transformations nor any renormalization of the charges. We illustrate our approach by applying it to the calculation of the Madelung constants of ionic crystals. We show that the convergence towards the system of infinite size is monotonic, which allows for a straightforward extrapolation of the Madelung constant. We are able to recover the Madelung constants with a remarkable accuracy, and at an almost negligible computational cost, i.e., a few seconds on a laptop computer. △ Less

Submitted 21 July, 2020; v1 submitted 1 June, 2020; originally announced June 2020.

Comments: 6 pages, 2 figures

Deep Underground Neutrino Experiment (DUNE), Far Detector Technical Design Report, Volume IV: Far Detector Single-phase Technology

Authors: B. Abi, R. Acciarri, Mario A. Acero, G. Adamov, D. Adams, M. Adinolfi, Z. Ahmad, J. Ahmed, T. Alion, S. Alonso Monsalve, C. Alt, J. Anderson, C. Andreopoulos, M. P. Andrews, F. Andrianala, S. Andringa, A. Ankowski, J. Anthony, M. Antonova, S. Antusch, A. Aranda Fernandez, A. Ariga, L. O. Arnold, M. A. Arroyave, J. Asaadi , et al. (941 additional authors not shown)

Abstract: The preponderance of matter over antimatter in the early universe, the dynamics of the supernovae that produced the heavy elements necessary for life, and whether protons eventually decay -- these mysteries at the forefront of particle physics and astrophysics are key to understanding the early evolution of our universe, its current state, and its eventual fate. DUNE is an international world-clas… ▽ More The preponderance of matter over antimatter in the early universe, the dynamics of the supernovae that produced the heavy elements necessary for life, and whether protons eventually decay -- these mysteries at the forefront of particle physics and astrophysics are key to understanding the early evolution of our universe, its current state, and its eventual fate. DUNE is an international world-class experiment dedicated to addressing these questions as it searches for leptonic charge-parity symmetry violation, stands ready to capture supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model. Central to achieving DUNE's physics program is a far detector that combines the many tens-of-kiloton fiducial mass necessary for rare event searches with sub-centimeter spatial resolution in its ability to image those events, allowing identification of the physics signatures among the numerous backgrounds. In the single-phase liquid argon time-projection chamber (LArTPC) technology, ionization charges drift horizontally in the liquid argon under the influence of an electric field towards a vertical anode, where they are read out with fine granularity. A photon detection system supplements the TPC, directly enhancing physics capabilities for all three DUNE physics drivers and opening up prospects for further physics explorations. The DUNE far detector technical design report (TDR) describes the DUNE physics program and the technical designs of the single- and dual-phase DUNE liquid argon TPC far detector modules. Volume IV presents an overview of the basic operating principles of a single-phase LArTPC, followed by a description of the DUNE implementation. Each of the subsystems is described in detail, connecting the high-level design requirements and decisions to the overriding physics goals of DUNE. △ Less

Submitted 8 September, 2020; v1 submitted 7 February, 2020; originally announced February 2020.

Comments: Minor corrections made for JINST submission, 673 pages, 312 figures (corrected errors in author list)

Report number: FERMILAB-PUB-20-027-ND

Deep Underground Neutrino Experiment (DUNE), Far Detector Technical Design Report, Volume III: DUNE Far Detector Technical Coordination

Authors: B. Abi, R. Acciarri, Mario A. Acero, G. Adamov, D. Adams, M. Adinolfi, Z. Ahmad, J. Ahmed, T. Alion, S. Alonso Monsalve, C. Alt, J. Anderson, C. Andreopoulos, M. P. Andrews, F. Andrianala, S. Andringa, A. Ankowski, J. Anthony, M. Antonova, S. Antusch, A. Aranda Fernandez, A. Ariga, L. O. Arnold, M. A. Arroyave, J. Asaadi , et al. (941 additional authors not shown)

Abstract: The preponderance of matter over antimatter in the early universe, the dynamics of the supernovae that produced the heavy elements necessary for life, and whether protons eventually decay -- these mysteries at the forefront of particle physics and astrophysics are key to understanding the early evolution of our universe, its current state, and its eventual fate. The Deep Underground Neutrino Exper… ▽ More The preponderance of matter over antimatter in the early universe, the dynamics of the supernovae that produced the heavy elements necessary for life, and whether protons eventually decay -- these mysteries at the forefront of particle physics and astrophysics are key to understanding the early evolution of our universe, its current state, and its eventual fate. The Deep Underground Neutrino Experiment (DUNE) is an international world-class experiment dedicated to addressing these questions as it searches for leptonic charge-parity symmetry violation, stands ready to capture supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model. The DUNE far detector technical design report (TDR) describes the DUNE physics program and the technical designs of the single- and dual-phase DUNE liquid argon TPC far detector modules. Volume III of this TDR describes how the activities required to design, construct, fabricate, install, and commission the DUNE far detector modules are organized and managed. This volume details the organizational structures that will carry out and/or oversee the planned far detector activities safely, successfully, on time, and on budget. It presents overviews of the facilities, supporting infrastructure, and detectors for context, and it outlines the project-related functions and methodologies used by the DUNE technical coordination organization, focusing on the areas of integration engineering, technical reviews, quality assurance and control, and safety oversight. Because of its more advanced stage of development, functional examples presented in this volume focus primarily on the single-phase (SP) detector module. △ Less

Submitted 8 September, 2020; v1 submitted 7 February, 2020; originally announced February 2020.

Comments: Minor corrections made for JINST submission, 209 pages, 55 figures (updated typos in Table A.5; corrected errors in author list)

Report number: FERMILAB-PUB-20-026-ND

Deep Underground Neutrino Experiment (DUNE), Far Detector Technical Design Report, Volume II: DUNE Physics

Authors: B. Abi, R. Acciarri, Mario A. Acero, G. Adamov, D. Adams, M. Adinolfi, Z. Ahmad, J. Ahmed, T. Alion, S. Alonso Monsalve, C. Alt, J. Anderson, C. Andreopoulos, M. P. Andrews, F. Andrianala, S. Andringa, A. Ankowski, J. Anthony, M. Antonova, S. Antusch, A. Aranda Fernandez, A. Ariga, L. O. Arnold, M. A. Arroyave, J. Asaadi , et al. (941 additional authors not shown)

Abstract: The preponderance of matter over antimatter in the early universe, the dynamics of the supernovae that produced the heavy elements necessary for life, and whether protons eventually decay -- these mysteries at the forefront of particle physics and astrophysics are key to understanding the early evolution of our universe, its current state, and its eventual fate. DUNE is an international world-clas… ▽ More The preponderance of matter over antimatter in the early universe, the dynamics of the supernovae that produced the heavy elements necessary for life, and whether protons eventually decay -- these mysteries at the forefront of particle physics and astrophysics are key to understanding the early evolution of our universe, its current state, and its eventual fate. DUNE is an international world-class experiment dedicated to addressing these questions as it searches for leptonic charge-parity symmetry violation, stands ready to capture supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model. The DUNE far detector technical design report (TDR) describes the DUNE physics program and the technical designs of the single- and dual-phase DUNE liquid argon TPC far detector modules. Volume II of this TDR, DUNE Physics, describes the array of identified scientific opportunities and key goals. Crucially, we also report our best current understanding of the capability of DUNE to realize these goals, along with the detailed arguments and investigations on which this understanding is based. This TDR volume documents the scientific basis underlying the conception and design of the LBNF/DUNE experimental configurations. As a result, the description of DUNE's experimental capabilities constitutes the bulk of the document. Key linkages between requirements for successful execution of the physics program and primary specifications of the experimental configurations are drawn and summarized. This document also serves a wider purpose as a statement on the scientific potential of DUNE as a central component within a global program of frontier theoretical and experimental particle physics research. Thus, the presentation also aims to serve as a resource for the particle physics community at large. △ Less

Submitted 25 March, 2020; v1 submitted 7 February, 2020; originally announced February 2020.

Comments: 357 pages, 165 figures (updated typos in Table 6.1 and corrected errors in author list)

Report number: FERMILAB-PUB-20-025-ND

Deep Underground Neutrino Experiment (DUNE), Far Detector Technical Design Report, Volume I: Introduction to DUNE

Authors: B. Abi, R. Acciarri, Mario A. Acero, G. Adamov, D. Adams, M. Adinolfi, Z. Ahmad, J. Ahmed, T. Alion, S. Alonso Monsalve, C. Alt, J. Anderson, C. Andreopoulos, M. P. Andrews, F. Andrianala, S. Andringa, A. Ankowski, J. Anthony, M. Antonova, S. Antusch, A. Aranda Fernandez, A. Ariga, L. O. Arnold, M. A. Arroyave, J. Asaadi , et al. (941 additional authors not shown)

Abstract: The preponderance of matter over antimatter in the early universe, the dynamics of the supernovae that produced the heavy elements necessary for life, and whether protons eventually decay -- these mysteries at the forefront of particle physics and astrophysics are key to understanding the early evolution of our universe, its current state, and its eventual fate. The Deep Underground Neutrino Exper… ▽ More The preponderance of matter over antimatter in the early universe, the dynamics of the supernovae that produced the heavy elements necessary for life, and whether protons eventually decay -- these mysteries at the forefront of particle physics and astrophysics are key to understanding the early evolution of our universe, its current state, and its eventual fate. The Deep Underground Neutrino Experiment (DUNE) is an international world-class experiment dedicated to addressing these questions as it searches for leptonic charge-parity symmetry violation, stands ready to capture supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model. The DUNE far detector technical design report (TDR) describes the DUNE physics program and the technical designs of the single- and dual-phase DUNE liquid argon TPC far detector modules. This TDR is intended to justify the technical choices for the far detector that flow down from the high-level physics goals through requirements at all levels of the Project. Volume I contains an executive summary that introduces the DUNE science program, the far detector and the strategy for its modular designs, and the organization and management of the Project. The remainder of Volume I provides more detail on the science program that drives the choice of detector technologies and on the technologies themselves. It also introduces the designs for the DUNE near detector and the DUNE computing model, for which DUNE is planning design reports. Volume II of this TDR describes DUNE's physics program in detail. Volume III describes the technical coordination required for the far detector design, construction, installation, and integration, and its organizational structure. Volume IV describes the single-phase far detector technology. A planned Volume V will describe the dual-phase technology. △ Less

Submitted 8 September, 2020; v1 submitted 7 February, 2020; originally announced February 2020.

Comments: Minor corrections made for JINST submission; 244 pages, 114 figures

Report number: FERMILAB-PUB-20-024-ND

Probing Mobile Charge Carriers in Semiconducting Carbon Nanotube Networks by Charge Modulation Spectroscopy

Authors: Nicolas F. Zorn, Francesca Scuratti, Felix J. Berger, Andrea Perinot, Daniel Heimfarth, Mario Caironi, Jana Zaumseil

Abstract: Solution-processed networks of semiconducting, single-walled carbon nanotubes (SWCNTs) have attracted considerable attention as materials for next-generation electronic devices and circuits. However, the impact of the SWCNT network composition on charge transport on a microscopic level remains an open and complex question. Here, we use charge-modulated absorption and photoluminescence spectroscopy… ▽ More Solution-processed networks of semiconducting, single-walled carbon nanotubes (SWCNTs) have attracted considerable attention as materials for next-generation electronic devices and circuits. However, the impact of the SWCNT network composition on charge transport on a microscopic level remains an open and complex question. Here, we use charge-modulated absorption and photoluminescence spectroscopy to probe exclusively the mobile charge carriers in monochiral (6,5) and mixed SWCNT network field-effect transistors. Ground state bleaching and charge-induced trion absorption features, as well as exciton quenching are observed depending on applied voltage and modulation frequency. Through correlation of the modulated mobile carrier density and the optical response of the nanotubes, we find that charge transport in mixed SWCNT networks depends strongly on the diameter and thus bandgap of the individual species. Mobile charges are preferentially transported by small bandgap SWCNTs especially at low gate voltages, whereas large bandgap species only start to participate at higher carrier concentrations. Our results demonstrate the excellent suitability of modulation spectroscopy to investigate charge transport in nanotube network transistors and highlight the importance of SWCNT network composition for their performance. △ Less

Submitted 4 February, 2020; originally announced February 2020.

Comments: ACS Nano 2020

An efficient numerical method for a long-term simulation of heat and mass transfer: the case of an insulated rammed earth wall

Authors: Madina Abdykarim, Julien Berger, Denys Dutykh, Amen Agbossou

Abstract: Innovative numerical scheme studied in this work enables to overcome two main limitations of Building Performance Simulation (BPS) programs as high computational cost and the choice of a very fine numerical grid. The method, called Super-Time-Step** (STS), is novel to the state-of-the-art of building simulations, but has already proved to be sufficiently efficient in recent studies from anisotro… ▽ More Innovative numerical scheme studied in this work enables to overcome two main limitations of Building Performance Simulation (BPS) programs as high computational cost and the choice of a very fine numerical grid. The method, called Super-Time-Step** (STS), is novel to the state-of-the-art of building simulations, but has already proved to be sufficiently efficient in recent studies from anisotropic heat conduction in astrophysics (Meyer et al. 2014). The given research is focused on employment of this adopted numerical method to model drying of a rammed earth wall with an additional insulation layer. The results show considerable advantage of the STS method compared to standard Euler explicit scheme. It is possible to choose at least 100 times bigger time-steps to maintain high accuracy and to cut computational cost by more than 92% in the same time. △ Less

Submitted 17 September, 2019; originally announced September 2019.

Comments: 10 pages, 6 figures, 4 tables, 14 references. Other author's papers can be downloaded at http://www.denys-dutykh.com/

Journal ref: Building Simulation conference, Rome, Italy, 2 - 4 September, 2019

Brightening of Long, Polymer-Wrapped Carbon Nanotubes by sp$^{3}$ Functionalization in Organic Solvents

Authors: Felix J. Berger, Jan Lüttgens, Tim Nowack, Tobias Kutsch, Sebastian Lindenthal, Lucas Kistner, Christine C. Müller, Lukas M. Bongartz, Victoria A. Lumsargis, Yuriy Zakharko, Jana Zaumseil

Abstract: The functionalization of semiconducting single-walled carbon nanotubes (SWNTs) with sp$^{3}$ defects that act as luminescent exciton traps is a powerful means to enhance their photoluminescence quantum yield (PLQY) and to add optical properties. However, the synthetic methods employed to introduce these defects are so far limited to aqueous dispersions of surfactant-coated SWNTs, often with short… ▽ More The functionalization of semiconducting single-walled carbon nanotubes (SWNTs) with sp$^{3}$ defects that act as luminescent exciton traps is a powerful means to enhance their photoluminescence quantum yield (PLQY) and to add optical properties. However, the synthetic methods employed to introduce these defects are so far limited to aqueous dispersions of surfactant-coated SWNTs, often with short tube lengths, residual metallic nanotubes and poor film formation properties. In contrast to that, dispersions of polymer-wrapped SWNTs in organic solvents feature unrivaled purity, higher PLQY and are easily processed into thin films for device applications. Here, we introduce a simple and scalable phase-transfer method to solubilize diazonium salts in organic nonhalogenated solvents for the controlled reaction with polymer-wrapped SWNTs to create luminescent aryl defects. Absolute PLQY measurements are applied to reliably quantify the defect-induced brightening. The optimization of defect density and trap depth results in PLQYs of up to 4 % with 90 % of photons emitted through the defect channel. We further reveal the strong impact of initial SWNT quality and length on the relative brightening by sp$^{3}$ defects. The efficient and simple production of large quantities of defect-tailored polymer-sorted SWNTs enables aerosol-jet printing and spin-coating of thin films with bright and nearly reabsorption-free defect emission, which are desired for carbon nanotube-based near-infrared light-emitting devices. △ Less

Submitted 6 August, 2019; originally announced August 2019.

Journal ref: published ACS Nano 2019

Accurate optical spectra of solids from pure time-dependent density-functional theory

Authors: Sarah Cavo, J. A. Berger, Pina Romaniello

Abstract: We present accurate optical spectra of semiconductors and insulators within a pure Kohn-Sham time-dependent density-functional approach. In particular, we show that the onset of the absorption is well reproduced when comparing to experiment. No empirical information nor a theory beyond Kohn-Sham density-functional theory, such as $GW$, is invoked to correct the Kohn-Sham gap. Our approach relies o… ▽ More We present accurate optical spectra of semiconductors and insulators within a pure Kohn-Sham time-dependent density-functional approach. In particular, we show that the onset of the absorption is well reproduced when comparing to experiment. No empirical information nor a theory beyond Kohn-Sham density-functional theory, such as $GW$, is invoked to correct the Kohn-Sham gap. Our approach relies on the link between the exchange-correlation kernel of time-dependent density functional theory and the derivative discontinuity of ground-state density-functional theory. We show explicitly how to relate these two quantities. We illustrate the accuracy and simplicity of our approach by applying it to various semiconductors (Si, GaP, GaAs) and wide-gap insulators (C, LiF, Ar). △ Less

Submitted 20 February, 2020; v1 submitted 2 August, 2019; originally announced August 2019.

Comments: 7 pages, 6 figures

Journal ref: Phys. Rev. B 101, 115109 (2020)

On the comparison of three numerical methods applied to building simulation: finite-differences, RC circuit approximation and a spectral method

Authors: Julien Berger, Suelen Gasparin, Denys Dutykh, Nathan Mendes

Abstract: Predictions of physical phenomena in buildings are carried out by using physical models formulated as a mathematical problem and solved by means of numerical methods, aiming at evaluating, for instance, the building thermal or hygrothermal performance by calculating distributions and fluxes of heat and moisture transfer. Therefore, the choice of the numerical method is crucial since it is a compro… ▽ More Predictions of physical phenomena in buildings are carried out by using physical models formulated as a mathematical problem and solved by means of numerical methods, aiming at evaluating, for instance, the building thermal or hygrothermal performance by calculating distributions and fluxes of heat and moisture transfer. Therefore, the choice of the numerical method is crucial since it is a compromise among (i) the solution accuracy, (ii) the computational cost to obtain the solution and (iii) the complexity of the method implementation. An efficient numerical method enables to compute an accurate solution with a minimum computational run time (CPU). On that account, this article brings an investigation on the performance of three numerical methods. The first one is the standard and widely used finite-difference approach, while the second one is the so-called RC approach, which is a particular method brought to the building physics area by means of an analogy of electric circuits. The third numerical method is the spectral one, which has been recently proposed to solve nonlinear diffusive problems in building physics. The three methods are evaluated in terms of accuracy on the assessment of the dependent variable (temperature or vapor pressure) or of density of fluxes for three different cases: i) heat diffusion through a concrete slab, ii) moisture diffusion through an aerated concrete slab and iii) heat diffusion using measured temperatures as boundary conditions. Results highlight the spectral approach as the most accurate method. The RC based model with a few number of resistances does not provide accurate results for temperature and vapor pressure distributions neither to flux densities nor conduction loads. △ Less

Submitted 29 May, 2019; originally announced May 2019.

Comments: 35 pages, 19 figures, 2 tables, 42 references. Other author's papers can be downloaded at http://www.denys-dutykh.com/

Journal ref: Building Simulation (2020), Vol. 13, pp. 1-18

A new model for simulating heat, air and moisture transport in porous building materials

Authors: Julien Berger, Denys Dutykh, Nathan Mendes, Bolatbek Rysbaiuly

Abstract: This work presents a detailed mathematical model combined with an innovative efficient numerical model to predict heat, air and moisture transfer through porous building materials. The model considers the transient effects of air transport and its impact on the heat and moisture transfer. The achievement of the mathematical model is detailed in the continuity of Luikov's work. A system composed of… ▽ More This work presents a detailed mathematical model combined with an innovative efficient numerical model to predict heat, air and moisture transfer through porous building materials. The model considers the transient effects of air transport and its impact on the heat and moisture transfer. The achievement of the mathematical model is detailed in the continuity of Luikov's work. A system composed of two advection-diffusion differential equations plus one exclusively diffusion equation is derived. The main issue to take into account the transient air transfer arises in the very small characteristic time of the transfer, implying very fine discretisation. To circumvent these difficulties, the numerical model is based on the Du Fort-Frankel explicit and unconditionally stable scheme for the exclusively diffusion equation. It is combined with a two-step Runge-Kutta scheme in time with the Scharfetter-Gummel numerical scheme in space for the coupled advection-diffusion equations. At the end, the numerical model enables to relax the stability condition, and, therefore, to save important computational efforts. A validation case is considered to evaluate the efficiency of the model for a nonlinear problem. Results highlight a very accurate solution computed about 16 times faster than standard approaches. After this numerical validation, the reliability of the mathematical model is evaluated by comparing the numerical predictions to experimental observations. The latter is measured within a multi-layered wall submitted to a sudden increase of vapor pressure on the inner side and driven climate boundary conditions on the outer side. A very satisfactory agreement is noted between the numerical predictions and experimental observations indicating an overall good reliability of the proposed model. △ Less

Submitted 7 March, 2019; originally announced March 2019.

Comments: 46 pages, 12 figures, 3 tables, 46 references. Other author's papers can be downloaded at http://www.denys-dutykh.com/

Journal ref: International Journal of Heat and Mass Transfer (2019), Vol. 134, pp.1041-1060

An efficient numerical model for liquid water uptake in porous material and its parameter estimation

Authors: Ainagul Jumabekova, Julien Berger, Denys Dutykh, Hervé Le Meur, Aurélie Foucquier, Mickaël Pailha, Christophe Ménézo

Abstract: The goal of this study is to propose an efficient numerical model for the predictions of capillary adsorption phenomena in a porous material. The Scharfetter-Gummel numerical scheme is proposed to solve an advection-diffusion equation with gravity flux. Its advantages such as accuracy, relaxed stability condition, and reduced computational cost are discussed along with the study of linear and nonl… ▽ More The goal of this study is to propose an efficient numerical model for the predictions of capillary adsorption phenomena in a porous material. The Scharfetter-Gummel numerical scheme is proposed to solve an advection-diffusion equation with gravity flux. Its advantages such as accuracy, relaxed stability condition, and reduced computational cost are discussed along with the study of linear and nonlinear cases. The reliability of the numerical model is evaluated by comparing the numerical predictions with experimental observations of liquid uptake in bricks. A parameter estimation problem is solved to adjust the uncertain coefficients of moisture diffusivity and hydraulic conductivity. △ Less

Submitted 27 February, 2019; originally announced March 2019.

Comments: 41 pages, 19 figures, 3 tables, 35 references. Other author's papers can be downloaded at http://www.denys-dutykh.com/

Journal ref: Numerical Heat Transfer, Part A: Applications (2019), Vol. 75, Issue 2, pp. 110-136

The principle underlying antiaromaticity

Authors: Raphael J. F. Berger, Alexandre Viel

Abstract: Aromaticity is one of the most widely used chemical concepts. Current definitions are purely phenomenological and relate symmetry, reactive stability and the occurence of molecular diamagnetic response currents. The antithetical concept of antiaromaticity provides a connection between the contrary properties of structural instability or distortion out of higher symmetry, a small HOMO-LUMO gap, and… ▽ More Aromaticity is one of the most widely used chemical concepts. Current definitions are purely phenomenological and relate symmetry, reactive stability and the occurence of molecular diamagnetic response currents. The antithetical concept of antiaromaticity provides a connection between the contrary properties of structural instability or distortion out of higher symmetry, a small HOMO-LUMO gap, and paramagnetic response currents. We reveal the principle that is underlying antiaromaticity in showing an intimate and strict symmetry induced relation between these properties. This principle can be proven and is formulated like: First order (and related) Jahn-Teller distorted molecules out of non-isometric point groups are prone to paramagnetic current susceptibility parallel to the main axis of symmetry. We show by the exemplary cases of cyclobutadiene, cylcooctatetraene, pentalene and manganese trifluoride how this principle works and discuss this new perspective on antiaromaticity. △ Less

Submitted 22 February, 2019; v1 submitted 21 November, 2018; originally announced November 2018.

Journal ref: Zeitschrift für Naturforschung B, Volume 75: Issue 4, 2020, 327--393

Detection of the gravitational redshift in the orbit of the star S2 near the Galactic centre massive black hole

Authors: GRAVITY Collaboration, R. Abuter, A. Amorim, N. Anugu, M. Bauböck, M. Benisty, J. P. Berger, N. Blind, H. Bonnet, W. Brandner, A. Buron, C. Collin, F. Chapron, Y. Clénet, V. Coudé du Foresto, P. T. de Zeeuw, C. Deen, F. Delplancke-Ströbele, R. Dembet, J. Dexter, G. Duvert, A. Eckart, F. Eisenhauer, G. Finger, N. M. Förster Schreiber , et al. (73 additional authors not shown)

Abstract: The highly elliptical, 16-year-period orbit of the star S2 around the massive black hole candidate Sgr A* is a sensitive probe of the gravitational field in the Galactic centre. Near pericentre at 120 AU, ~1400 Schwarzschild radii, the star has an orbital speed of ~7650 km/s, such that the first-order effects of Special and General Relativity have now become detectable with current capabilities. O… ▽ More The highly elliptical, 16-year-period orbit of the star S2 around the massive black hole candidate Sgr A* is a sensitive probe of the gravitational field in the Galactic centre. Near pericentre at 120 AU, ~1400 Schwarzschild radii, the star has an orbital speed of ~7650 km/s, such that the first-order effects of Special and General Relativity have now become detectable with current capabilities. Over the past 26 years, we have monitored the radial velocity and motion on the sky of S2, mainly with the SINFONI and NACO adaptive optics instruments on the ESO Very Large Telescope, and since 2016 and leading up to the pericentre approach in May 2018, with the four-telescope interferometric beam-combiner instrument GRAVITY. From data up to and including pericentre, we robustly detect the combined gravitational redshift and relativistic transverse Doppler effect for S2 of z ~ 200 km/s / c with different statistical analysis methods. When parameterising the post-Newtonian contribution from these effects by a factor f, with f = 0 and f = 1 corresponding to the Newtonian and general relativistic limits, respectively, we find from posterior fitting with different weighting schemes f = 0.90 +/- 0.09 (stat) +\- 0.15 (sys). The S2 data are inconsistent with pure Newtonian dynamics. △ Less

Submitted 24 July, 2018; originally announced July 2018.

Comments: Accepted for publication in A&A Letters, 29 June 2018, 10 pages, 6 figures, corresponding author: F. Eisenhauer <[email protected]>

Journal ref: A&A 615, L15 (2018)

Unphysical Discontinuities in GW Methods

Authors: Mickaël Véril, Pina Romaniello, J. A. Berger, Pierre-François Loos

Abstract: We report unphysical irregularities and discontinuities in some key experimentally-measurable quantities computed within the GW approximation of many-body perturbation theory applied to molecular systems. In particular, we show that the solution obtained with partially self-consistent GW schemes depends on the algorithm one uses to solve self-consistently the quasi-particle (QP) equation. The main… ▽ More We report unphysical irregularities and discontinuities in some key experimentally-measurable quantities computed within the GW approximation of many-body perturbation theory applied to molecular systems. In particular, we show that the solution obtained with partially self-consistent GW schemes depends on the algorithm one uses to solve self-consistently the quasi-particle (QP) equation. The main observation of the present study is that each branch of the self-energy is associated with a distinct QP solution, and that each switch between solutions implies a significant discontinuity in the quasiparticle energy as a function of the internuclear distance. Moreover, we clearly observe "ripple" effects, i.e., a discontinuity in one of the QP energies induces (smaller) discontinuities in the other QP energies. Going from one branch to another implies a transfer of weight between two solutions of the QP equation. The case of occupied, virtual and frontier orbitals are separately discussed on distinct diatomics. In particular, we show that multisolution behavior in frontier orbitals is more likely if the HOMO-LUMO gap is small. △ Less

Submitted 7 September, 2018; v1 submitted 19 July, 2018; originally announced July 2018.

Comments: 7 pages, 5 figures

Journal ref: J. Chem. Theory Comput. 14, 5220 (2018)

On the solution of coupled heat and moisture transport in porous material

Authors: Julien Berger, Suelen Gasparin, Denys Dutykh, Nathan Mendes

Abstract: Comparisons of experimental observation of heat and moisture transfer through porous building materials with numerical results have been presented in numerous studies reported in literature. However, some discrepancies have been observed, highlighting underestimation of sorption process and overestimation of desorption process. Some studies intend to explain the discrepancies by analysing the impo… ▽ More Comparisons of experimental observation of heat and moisture transfer through porous building materials with numerical results have been presented in numerous studies reported in literature. However, some discrepancies have been observed, highlighting underestimation of sorption process and overestimation of desorption process. Some studies intend to explain the discrepancies by analysing the importance of hysteresis effects as well as carrying out sensitivity analyses on the input parameters as convective transfer coefficients. This article intends to investigate the accuracy and efficiency of the coupled solution by adding advective transfer of both heat and moisture in the physical model. In addition, the efficient Scharfetter and Gummel numerical scheme is proposed to solve the system of advection-diffusion equations, which has the advantages of being well-balanced and asymptotically preserving. Moreover, the scheme is particularly efficient in terms of accuracy and reduction of computational time when using large spatial discretisation parameters. Several linear and non-linear cases are studied to validate the method and highlight its specific features. At the end, an experimental benchmark from the literature is considered. The numerical results are compared to the experimental data for a pure diffusive model and also for the proposed model. The latter presents better agreement with the experimental data. The influence of the hysteresis effects on the moisture capacity is also studied, by adding a third differential equation. △ Less

Submitted 14 May, 2018; v1 submitted 20 April, 2018; originally announced May 2018.

Comments: 51 pages, 21 figures, 3 tables, 44 references. Other author's publications can be downloaded at http://www.denys-dutykh.com/

Journal ref: Transport in Porous Media (2018) Vol. 121, pp. 665-702