Showing 1–19 of 19 results for author: Berg, B A

Flat, Uniformly Expanding Space in five Exercises

Authors: Bernd Albert Berg

Abstract: Exercises with solutions are presented which should allow advanced undergraduate students to understand properties of a flat, uniformly expanding space. No knowledge of general or special relativity is needed besides that the speed of light $c$ is a constant. The material could be used stand alone or would fit well at the end of a treatment of special relativity, Exercises with solutions are presented which should allow advanced undergraduate students to understand properties of a flat, uniformly expanding space. No knowledge of general or special relativity is needed besides that the speed of light $c$ is a constant. The material could be used stand alone or would fit well at the end of a treatment of special relativity, △ Less

Submitted 30 January, 2024; originally announced January 2024.

Comments: 8 pages, 3 figures

Warming or cooling from a random walk process in the temperature

Authors: Bernd Albert Berg

Abstract: A simple 3-parameter random walk model for monthly fluctuations $\triangle T$ of a temperature $T$ is introduced. Applied to a time range of 170 years, temperature fluctuations of the model produce for about 14\% of the runs warming that exceeds the observed global warming of the earth surface temperature from 1850 to 2019. On the other hand, there is a 50\% likelihood for runs of our model result… ▽ More A simple 3-parameter random walk model for monthly fluctuations $\triangle T$ of a temperature $T$ is introduced. Applied to a time range of 170 years, temperature fluctuations of the model produce for about 14\% of the runs warming that exceeds the observed global warming of the earth surface temperature from 1850 to 2019. On the other hand, there is a 50\% likelihood for runs of our model resulting in cooling. If a similar random walk process can be used as an effective model for fluctuations of the global earth surface temperature, effects due to internal and external forcing could be considerably over- or underestimated. △ Less

Submitted 1 February, 2020; originally announced February 2020.

Comments: 4 pages, 8 figures

A brief history of the introduction of generalized ensembles to Markov chain Monte Carlo simulations

Authors: Bernd A Berg

Abstract: The most efficient weights for Markov chain Monte Carlo calculations of physical observables are not necessarily those of the canonical ensemble. Generalized ensembles, which do not exist in nature but can be simulated on computers, lead often to a much faster convergence. In particular, they have been used for simulations of first order phase transitions and for simulations of complex systems in… ▽ More The most efficient weights for Markov chain Monte Carlo calculations of physical observables are not necessarily those of the canonical ensemble. Generalized ensembles, which do not exist in nature but can be simulated on computers, lead often to a much faster convergence. In particular, they have been used for simulations of first order phase transitions and for simulations of complex systems in which conflicting constraints lead to a rugged free energy landscape. Starting off with the Metropolis algorithm and Hastings' extension, I present a mini review which focuses on the explosive use of generalized ensembles in the early 1990s. Illustrations are given, which range from spin models to peptides. △ Less

Submitted 13 December, 2016; originally announced December 2016.

Comments: 15 pages, 9 figure, based on an invited talk given at the Conference on Phase Transitions and Critical Phenomena, Coventry, April 6-8, 2016

Least square fitting with one parameter less

Authors: Bernd A. Berg

Abstract: It is shown that whenever the multiplicative normalization of a fitting function is not known, least square fitting by $χ^2$ minimization can be performed with one parameter less than usual by converting the normalization parameter into a function of the remaining parameters and the data. It is shown that whenever the multiplicative normalization of a fitting function is not known, least square fitting by $χ^2$ minimization can be performed with one parameter less than usual by converting the normalization parameter into a function of the remaining parameters and the data. △ Less

Submitted 2 May, 2016; v1 submitted 28 May, 2015; originally announced May 2015.

Comments: 6 pages, 1 figure. Fortran code available on the Web. Erratum: The 4-parameter example suffered from a typo in two subroutines, which is now corrected

Journal ref: Comp. Phys. Comm. 200 (2016) 254-258

On the energy momentum dispersion in the lattice regularization

Authors: Bernd A. Berg, Zach McDargh

Abstract: For a free scalar boson field and for U(1) gauge theory finite volume (infrared) and other corrections to the energy-momentum dispersion in the lattice regularization are investigated calculating energy eigenstates from the fall off behavior of two-point correlation functions. For small lattices the squared dispersion energy defined by… ▽ More For a free scalar boson field and for U(1) gauge theory finite volume (infrared) and other corrections to the energy-momentum dispersion in the lattice regularization are investigated calculating energy eigenstates from the fall off behavior of two-point correlation functions. For small lattices the squared dispersion energy defined by $E_{\rm dis}^2=E_{\vec{k}}^2-E_0^2-4\sum_{i=1}^{d-1}\sin(k_i/2)^2$ is in both cases negative ($d$ is the Euclidean space-time dimension and $E_{\vec{k}}$ the energy of momentum $\vec{k}$ eigenstates). Observation of $E_{\rm dis}^2=0$ has been an accepted method to demonstrate the existence of a massless photon ($E_0=0$) in 4D lattice gauge theory, which we supplement here by a study of its finite size corrections. A surprise from the lattice regularization of the free field is that infrared corrections do {\it not} eliminate a difference between the groundstate energy $E_0$ and the mass parameter $M$ of the free scalar lattice action. Instead, the relation $E_0=\cosh^{-1} (1+M^2/2)$ is derived independently of the spatial lattice size. △ Less

Submitted 22 October, 2012; v1 submitted 2 July, 2012; originally announced July 2012.

Comments: 9 pages, 2 figures. Parts of the paper have been rewritten and expanded to clarify the results

Journal ref: JHEP 12 (2012) 042

Detection of a small shift in a broad distribution

Authors: Bernd A. Berg

Abstract: Statistical methods for the extraction of a small shift in broad data distributions are examined by means of Monte Carlo simulations. This work was originally motivated by the CERN neutrino beam to Gran Sasso (CNGS) experiment for which the OPERA detector collaboration reported a time shift in a broad distribution with an accuracy of $\pm 7.8\,$ns, while the fluctuation of the average time turns w… ▽ More Statistical methods for the extraction of a small shift in broad data distributions are examined by means of Monte Carlo simulations. This work was originally motivated by the CERN neutrino beam to Gran Sasso (CNGS) experiment for which the OPERA detector collaboration reported a time shift in a broad distribution with an accuracy of $\pm 7.8\,$ns, while the fluctuation of the average time turns with $\pm 23.8\,$ns out to be much larger. Although the physical result of a big shift has been withdrawn, statistical methods that make an identification in a broad distribution with such a small error possible remain of interest. △ Less

Submitted 5 September, 2014; v1 submitted 24 January, 2012; originally announced January 2012.

Comments: 13 pages, 21 figures, revised after referee report

Two exercises about neutrino departure times at CERN

Authors: Bernd A. Berg, Peter Hoeflich

Abstract: Two simple exercises are solved, which educators can use to awake interest of their students in subtleties of the CERN Neutrino beam to Grand Sasso (CNGS) experiment. The first one is about the statistical error of the average departure time of neutrinos from CERN. The second one about a hypothetical bias in the departure times. Two simple exercises are solved, which educators can use to awake interest of their students in subtleties of the CERN Neutrino beam to Grand Sasso (CNGS) experiment. The first one is about the statistical error of the average departure time of neutrinos from CERN. The second one about a hypothetical bias in the departure times. △ Less

Submitted 12 October, 2011; originally announced October 2011.

Comments: 2 pages, no figures

Display of probability densities for data from a continuous distribution

Authors: Bernd A. Berg

Abstract: Based on cumulative distribution functions, Fourier series expansion and Kolmogorov tests, we present a simple method to display probability densities for data drawn from a continuous distribution. It is often more efficient than using histograms. Based on cumulative distribution functions, Fourier series expansion and Kolmogorov tests, we present a simple method to display probability densities for data drawn from a continuous distribution. It is often more efficient than using histograms. △ Less

Submitted 3 May, 2011; originally announced May 2011.

Comments: 5 pages, 4 figures, presented at Computer Simulation Studies XXIV, Athens, GA, 2011

Journal ref: Physics Procedia 15 (2011) 17-21

Program package for multicanonical simulations of U(1) lattice gauge theory

Authors: Alexei Bazavov, Bernd A. Berg

Abstract: We document our Fortran 77 code for multicanonical simulations of 4D U(1) lattice gauge theory in the neighborhood of its phase transition. This includes programs and routines for canonical simulations using biased Metropolis heatbath updating and overrelaxation, determination of multicanonical weights via a Wang-Landau recursion, and multicanonical simulations with fixed weights supplemented by… ▽ More We document our Fortran 77 code for multicanonical simulations of 4D U(1) lattice gauge theory in the neighborhood of its phase transition. This includes programs and routines for canonical simulations using biased Metropolis heatbath updating and overrelaxation, determination of multicanonical weights via a Wang-Landau recursion, and multicanonical simulations with fixed weights supplemented by overrelaxation sweeps. Measurements are performed for the action, Polyakov loops and some of their structure factors. Many features of the code transcend the particular application and are expected to be useful for other lattice gauge theory models as well as for systems in statistical physics. △ Less

Submitted 23 March, 2009; originally announced March 2009.

Comments: 10 pages, 7 figures

Journal ref: Comput.Phys.Commun.180:2339-2347,2009

From Data to Probability Densities without Histograms

Authors: Bernd A. Berg, Robert C. Harris

Abstract: When one deals with data drawn from continuous variables, a histogram is often inadequate to display their probability density. It deals inefficiently with statistical noise, and binsizes are free parameters. In contrast to that, the empirical cumulative distribution function (obtained after sorting the data) is parameter free. But it is a step function, so that its differentiation does not give… ▽ More When one deals with data drawn from continuous variables, a histogram is often inadequate to display their probability density. It deals inefficiently with statistical noise, and binsizes are free parameters. In contrast to that, the empirical cumulative distribution function (obtained after sorting the data) is parameter free. But it is a step function, so that its differentiation does not give a smooth probability density. Based on Fourier series expansion and Kolmogorov tests, we introduce a simple method, which overcomes this problem. Error bars on the estimated probability density are calculated using a jackknife method. We give several examples and provide computer code reproducing them. You may want to look at the corresponding figures 4 to 9 first. △ Less

Submitted 22 December, 2007; originally announced December 2007.

Comments: 9 pages, 9 figures

Journal ref: Comp. Phys. Commun. 179 (2008) 443-448

Numerical calculation of the combinatorial entropy of partially ordered ice

Authors: Bernd A. Berg, Wei Yang

Abstract: Using a one-parameter case as an example, we demonstrate that multicanonical simulations allow for accurate estimates of the residual combinatorial entropy of partially ordered ice. For the considered case corrections to an (approximate) analytical formula are found to be small, never exceeding 0.5%. The method allows one as well to calculate combinatorial entropies for many other systems. Using a one-parameter case as an example, we demonstrate that multicanonical simulations allow for accurate estimates of the residual combinatorial entropy of partially ordered ice. For the considered case corrections to an (approximate) analytical formula are found to be small, never exceeding 0.5%. The method allows one as well to calculate combinatorial entropies for many other systems. △ Less

Submitted 20 September, 2007; v1 submitted 11 July, 2007; originally announced July 2007.

Comments: Extended version: 7 pages, 10 figures (v1 is letter-type version)

Journal ref: J. Chem. Phys. 127, 224502 (2007)

Heat Bath Efficiency with Metropolis-Type Updating

Authors: Alexei Bazavov, Bernd A. Berg

Abstract: We illustrate for 4D SU(2) and U(1) lattice gauge theory that sampling with a biased Metropolis scheme is essentially equivalent to using the heat bath algorithm. Only, the biased Metropolis method can also be applied when an efficient heat bath algorithm does not exist. We illustrate for 4D SU(2) and U(1) lattice gauge theory that sampling with a biased Metropolis scheme is essentially equivalent to using the heat bath algorithm. Only, the biased Metropolis method can also be applied when an efficient heat bath algorithm does not exist. △ Less

Submitted 26 April, 2005; v1 submitted 7 March, 2005; originally announced March 2005.

Comments: 5 pages, 4 figures. Revisions after referee reports

Journal ref: Phys.Rev. D71 (2005) 114506

Rugged Metropolis Sampling with Simultaneous Updating of Two Dynamical Variables

Authors: Bernd A. Berg, Huan-Xiang Zhou

Abstract: The Rugged Metropolis (RM) algorithm is a biased updating scheme, which aims at directly hitting the most likely configurations in a rugged free energy landscape. Details of the one-variable (RM$_1$) implementation of this algorithm are presented. This is followed by an extension to simultaneous updating of two dynamical variables (RM$_2$). In a test with Met-Enkephalin in vacuum RM$_2$ improves… ▽ More The Rugged Metropolis (RM) algorithm is a biased updating scheme, which aims at directly hitting the most likely configurations in a rugged free energy landscape. Details of the one-variable (RM$_1$) implementation of this algorithm are presented. This is followed by an extension to simultaneous updating of two dynamical variables (RM$_2$). In a test with Met-Enkephalin in vacuum RM$_2$ improves conventional Metropolis simulations by a factor of about four. Correlations between three or more dihedral angles appear to prevent larger improvements at low temperatures. We also investigate a multi-hit Metropolis scheme, which spends more CPU time on variables with large autocorrelation times. △ Less

Submitted 8 May, 2005; v1 submitted 3 February, 2005; originally announced February 2005.

Comments: 8 pages, 5 figures. Revisions after referee reports. Additional simulations for temperatures down to 220K

Journal ref: Phys. Rev. E 72, 016712 (2005)

Introduction to Markov Chain Monte Carlo Simulations and their Statistical Analysis

Authors: Bernd A. Berg

Abstract: This article is a tutorial on Markov chain Monte Carlo simulations and their statistical analysis. The theoretical concepts are illustrated through many numerical assignments from the author's book on the subject. Computer code (in Fortran) is available for all subjects covered and can be downloaded from the web. This article is a tutorial on Markov chain Monte Carlo simulations and their statistical analysis. The theoretical concepts are illustrated through many numerical assignments from the author's book on the subject. Computer code (in Fortran) is available for all subjects covered and can be downloaded from the web. △ Less

Submitted 19 October, 2004; originally announced October 2004.

Comments: Invited lectures given at the National University of Singapore

Journal ref: In Markov Chain Monte Carlo, W.S. Kendall et al. Editors, Lecture Notes Series, Institute for Mathematical Sciences, National University of Singapore, Vol.7, p.1 ff., World Scientific, 2005

Generalized Ensemble Simulations for Complex Systems

Authors: Bernd A. Berg

Abstract: The most efficient MC weights for the calculation of physical, canonical expectation values are not necessarily those of the canonical ensemble. The use of suitably generalized ensembles can lead to a much faster convergence of the simulation. Although not realized by nature, these ensembles can be implemented on computers. In recent years generalized ensembles have in particular been studied fo… ▽ More The most efficient MC weights for the calculation of physical, canonical expectation values are not necessarily those of the canonical ensemble. The use of suitably generalized ensembles can lead to a much faster convergence of the simulation. Although not realized by nature, these ensembles can be implemented on computers. In recent years generalized ensembles have in particular been studied for the simulation of complex systems. For these systems it is typical that conflicting constraints lead to free energy barriers, which fragment the configuration space. Examples of major interest are spin glasses and proteins. In my overview I first comment on the strengths and weaknesses of a few major approaches, multicanonical simulations, transition variable methods, and parallel tempering. Subsequently, two applications are presented: a new analysis of the Parisi overlap distribution for the 3d Edwards-Anderson Ising spin glass and the helix-coil transition of amino-acid homo-oligomers. △ Less

Submitted 5 June, 2002; v1 submitted 24 October, 2001; originally announced October 2001.

Comments: Plenary talk at the CCP 2001 conference, submitted to Comp. Phys. Commun., 7 pages, 3 figures, some typos eliminated

Journal ref: Comp. Phys. Commun 147 (2002) 52

Introduction to Multicanonical Monte Carlo Simulations

Authors: Bernd A. Berg

Abstract: Monte Carlo simulation with {\it a-priori} unknown weights have attracted recent attention and progress has been made in understanding (i) the technical feasibility of such simulations and (ii) classes of systems for which such simulations lead to major improvements over conventional Monte Carlo simulations. After briefly sketching the history of multicanonical calculations and their range of ap… ▽ More Monte Carlo simulation with {\it a-priori} unknown weights have attracted recent attention and progress has been made in understanding (i) the technical feasibility of such simulations and (ii) classes of systems for which such simulations lead to major improvements over conventional Monte Carlo simulations. After briefly sketching the history of multicanonical calculations and their range of application, a general introduction in the context of the statistical physics of the d-dimensional generalized Potts models is given. Multicanonical simulations yield canonical expectation values for a range of temperatures or any other parameter(s) for which appropriate weights can be constructed. We shall address in some details the question how the multicanonical weights are actually obtained. Subsequently miscellaneous topics related to the considered algorithms are reviewed. Then multicanonical studies of first order phase transitions are discussed and finally applications to complex systems such as spin glasses and proteins. △ Less

Submitted 15 September, 1999; originally announced September 1999.

Comments: Review, 24 pages

Journal ref: Fields Inst.Commun.26:1,2000

Configuration Space for Random Walk Dynamics

Authors: Bernd A. Berg, Ulrich H. E. Hansmann

Abstract: Applied to statistical physics models, the random cost algorithm enforces a Random Walk (RW) in energy (or possibly other thermodynamic quantities). The dynamics of this procedure is distinct from fixed weight updates. The probability for a configuration to be sampled depends on a number of unusual quantities, which are explained in this paper. This has been overlooked in recent literature, wher… ▽ More Applied to statistical physics models, the random cost algorithm enforces a Random Walk (RW) in energy (or possibly other thermodynamic quantities). The dynamics of this procedure is distinct from fixed weight updates. The probability for a configuration to be sampled depends on a number of unusual quantities, which are explained in this paper. This has been overlooked in recent literature, where the method is advertised for the calculation of canonical expectation values. We illustrate these points for the $2d$ Ising model. In addition, we proof a previously conjectured equation which relates microcanonical expectation values to the spectral density. △ Less

Submitted 10 June, 1998; v1 submitted 13 May, 1998; originally announced May 1998.

Comments: Various minor changes, appendix added, Fig. 2 dropped

Report number: MTU-PHY-H1

Could Spontaneous Transitions be Spontaneous?

Authors: Bernd A. Berg

Abstract: It is considered to re-formulate quantum theory as it appears: A theory of continuous and causal time evolution, interrupted by discontinuous and stochastic jumps. To develop the (missing) theory of jumps a heuristic-phenomenological approach is suggested. Relying on a global reduction process, a hypothesis is introduced postulating spontaneous collapse of superpositions of states which describe… ▽ More It is considered to re-formulate quantum theory as it appears: A theory of continuous and causal time evolution, interrupted by discontinuous and stochastic jumps. To develop the (missing) theory of jumps a heuristic-phenomenological approach is suggested. Relying on a global reduction process, a hypothesis is introduced postulating spontaneous collapse of superpositions of states which describe spontaneous absorption or emission. The collapse probability determines a mean collapse time $τ^c = b \hbar / \triangle E$, where $b$ is a dimensionless constant and $\triangle E$ is the difference in energy distribution between alternative branches. Ramsey atomic beam spectroscopy yields a lower bound on $b$ and avalanche photodiodes give an upper bound, such that $1.35\cdot 10^{11} < b < 3.8\cdot 10^{21}$. Ample opportunities for experimental improvements exist. △ Less

Submitted 18 July, 1998; v1 submitted 2 September, 1996; originally announced September 1996.

Comments: Version 3. Many minor revisons of version 2. Version 2 contained major revisions. 15 pages latex and 1 postscript figure in one file, uuencoded Z-compressed .tar file created by uufiles

Comment on "Monte Carlo Simulation of a First-Order Transition"

Authors: Bernd A. Berg, Ulrich H. E. Hansmann, Yuko Okamoto

Abstract: We comment on a recent article by Hao and Scheraga. We comment on a recent article by Hao and Scheraga. △ Less

Submitted 11 November, 1994; originally announced November 1994.

Comments: TEX 3 pages

Report number: NWU-6/94