Showing 1–7 of 7 results for author: Becoulet, M

The JOREK non-linear extended MHD code and applications to large-scale instabilities and their control in magnetically confined fusion plasmas

Authors: M Hoelzl, GTA Huijsmans, SJP Pamela, M Becoulet, E Nardon, FJ Artola, B Nkonga, CV Atanasiu, V Bandaru, A Bhole, D Bonfiglio, A Cathey, O Czarny, A Dvornova, T Feher, A Fil, E Franck, S Futatani, M Gruca, H Guillard, JW Haverkort, I Holod, D Hu, SK Kim, SQ Korving , et al. (28 additional authors not shown)

Abstract: JOREK is a massively parallel fully implicit non-linear extended MHD code for realistic tokamak X-point plasmas. It has become a widely used versatile code for studying large-scale plasma instabilities and their control developed in an international community. This article gives a comprehensive overview of the physics models implemented, numerical methods applied for solving the equations and phys… ▽ More JOREK is a massively parallel fully implicit non-linear extended MHD code for realistic tokamak X-point plasmas. It has become a widely used versatile code for studying large-scale plasma instabilities and their control developed in an international community. This article gives a comprehensive overview of the physics models implemented, numerical methods applied for solving the equations and physics studies performed with the code. A dedicated section highlights some of the verification work done for the code. A hierarchy of different physics models is available including a free boundary and resistive wall extension and hybrid kinetic-fluid models. The code allows for flux-surface aligned iso-parametric finite element grids in single and double X-point plasmas which can be extended to the true physical walls and uses a robust fully implicit time step**. Particular focus is laid on plasma edge and scrape-off layer (SOL) physics as well as disruption related phenomena. Among the key results obtained with JOREK regarding plasma edge and SOL, are deep insights into the dynamics of edge localized modes (ELMs), ELM cycles, and ELM control by resonant magnetic perturbations, pellet injection, as well as by vertical magnetic kicks. Also ELM free regimes, detachment physics, the generation and transport of impurities during an ELM, and electrostatic turbulence in the pedestal region are investigated. Regarding disruptions, the focus is on the dynamics of the thermal quench and current quench triggered by massive gas injection (MGI) and shattered pellet injection (SPI), runaway electron (RE) dynamics as well as the RE interaction with MHD modes, and vertical displacement events (VDEs). Also the seeding and suppression of tearing modes (TMs), the dynamics of naturally occurring thermal quenches triggered by locked modes, and radiative collapses are being studied. △ Less

Submitted 21 April, 2021; v1 submitted 18 November, 2020; originally announced November 2020.

Comments: Comprehensive review published as special topic article in Nuclear Fusion

Non-linear modeling of the threshold between ELM mitigation and ELM suppression by Resonant Magnetic Perturbations in ASDEX Upgrade

Authors: François Orain, M. Hoelzl, F. Mink, M. Willensdorfer, M. Bécoulet, M. Dunne, S. Günter, G. T. A. Huijsmans, K. Lackner, S. Pamela, W. Suttrop, E. Viezzer

Abstract: The interaction between Edge Localized Modes (ELMs) and Resonant Magnetic Perturbations (RMPs) is modeled with the magnetohydrodynamic code JOREK using experimental parameters from ASDEX Upgrade discharges. The ELM mitigation or suppression is optimal when the amplification of both tearing and peeling-kink responses result in a better RMP penetration. The ELM mitigation or suppression is not only… ▽ More The interaction between Edge Localized Modes (ELMs) and Resonant Magnetic Perturbations (RMPs) is modeled with the magnetohydrodynamic code JOREK using experimental parameters from ASDEX Upgrade discharges. The ELM mitigation or suppression is optimal when the amplification of both tearing and peeling-kink responses result in a better RMP penetration. The ELM mitigation or suppression is not only due to the reduction of the pressure gradient, but predominantly arises from the toroidal coupling between the ELMs and the RMP-induced mode at the plasma edge, forcing the edge modes to saturate at a low level. The bifurcation from ELM mitigation to ELM suppression is observed when the RMP amplitude is increased. ELM mitigation is characterized by rotating modes at the edge, while the mode locking to RMPs is induced by the resonant braking of the electron perpendicular flow in the ELM suppression regime. △ Less

Submitted 3 June, 2019; v1 submitted 1 February, 2019; originally announced February 2019.

Journal ref: Physics of Plasmas 26, 042503 (2019)

Mechanics of ELM control coil induced alpha particle transport

Authors: Konsta Särkimäki, Jari Varje, Marina Bécoulet, Yueqiang Liu, Taina Kurki-Suonio

Abstract: Using the orbit-following code ASCOT, we model alpha particle transport in ITER under the influence of ELM control coils (ECCs), toroidal field ripple, and test blanket modules, with emphasis on how the plasma response (PR) modifies the transport mechanisms and fast ion loads on the divertor. We found that while PR shields the plasma by healing broken flux surfaces, it also opens a new loss channe… ▽ More Using the orbit-following code ASCOT, we model alpha particle transport in ITER under the influence of ELM control coils (ECCs), toroidal field ripple, and test blanket modules, with emphasis on how the plasma response (PR) modifies the transport mechanisms and fast ion loads on the divertor. We found that while PR shields the plasma by healing broken flux surfaces, it also opens a new loss channel for marginally trapped particles: PR causes strong toroidal variation of the poloidal field near the X-point which leads to de-localisation of banana tips and collisionless transport. The reduction in passing particle losses and the increase in marginally trapped particle losses shift divertor loads from targets to the dome and under-the-dome structures. The plasma response was calculated by both MARS-F and JOREK codes. The new transport mechanism was stronger for PR calculated by JOREK which, unlike MARS-F, explicitly includes the X-point. △ Less

Submitted 13 September, 2017; originally announced September 2017.

Non-linear modeling of the plasma response to RMPs in ASDEX Upgrade

Authors: F. Orain, M. Hoelzl, E. Viezzer, M. Dunne, M. Becoulet, P. Cahyna, G. T. A. Huijsmans, J. Morales, M. Willensdorfer, W. Suttrop, A. Kirk, S. Pamela, E. Strumberger, S. Guenter, A. Lessig, the ASDEX Upgrade Team, the EUROfusion MST1 Team

Abstract: The plasma response to Resonant Magnetic Perturbations (RMPs) in ASDEX Upgrade is modeled with the non-linear resistive MHD code JOREK, using input profiles that match those of the experiments as closely as possible. The RMP configuration for which Edge Localized Modes are best mitigated in experiments is related to the largest edge kink response observed near the X-point in modeling. On the edge… ▽ More The plasma response to Resonant Magnetic Perturbations (RMPs) in ASDEX Upgrade is modeled with the non-linear resistive MHD code JOREK, using input profiles that match those of the experiments as closely as possible. The RMP configuration for which Edge Localized Modes are best mitigated in experiments is related to the largest edge kink response observed near the X-point in modeling. On the edge resonant surfaces $q = m/n$, the coupling between the m + 2 kink component and the m resonant component is found to induce the amplification of the resonant magnetic perturbation. The ergodicity and the 3D-displacement near the X-point induced by the resonant amplification can only partly explain the density pumpout observed in experiments. △ Less

Submitted 24 February, 2016; originally announced February 2016.

Comments: Submitted to Nuclear Fusion 18 pages (19 pages with Arxiv's compilation formatting), 13 figures

Modelling of spatial structure of divertor footprints caused by edge-localized modes mitigated by magnetic perturbations

Authors: Pavel Cahyna, Marina Becoulet, Guido T. A. Huijsmans, Francois Orain, Jorge Morales, Andrew Kirk, Andrew J. Thornton, Stanislas Pamela, Radomir Panek, Matthias Hoelzl

Abstract: Resonant magnetic perturbations (RMPs) can mitigate the edge-localized modes (ELMs), i.e. cause a change of the ELM character towards smaller energy loss and higher frequency. During mitigation a change of the spatial structure of ELM loads on divertor was observed on DIII-D and MAST: the power is deposited predominantly in the footprint structures formed by the magnetic perturbation. In the prese… ▽ More Resonant magnetic perturbations (RMPs) can mitigate the edge-localized modes (ELMs), i.e. cause a change of the ELM character towards smaller energy loss and higher frequency. During mitigation a change of the spatial structure of ELM loads on divertor was observed on DIII-D and MAST: the power is deposited predominantly in the footprint structures formed by the magnetic perturbation. In the present contribution we develop a theory explaining this effect, based on the idea that part of the ELM loss is caused by parallel transport in the homoclinic tangle formed by the magnetic perturbation of the ELM. The modified tangle resulting from the combination of the ELM perturbation and the applied RMP has the expected property of bringing open field lines in the same areas as the tangle from the RMP alone. We show that this explanation is consistent with features of the mitigated ELMs on MAST. We in addition validated our theory by an analysis of simulations of mitigated ELMs using the code JOREK. We produced detailed laminar plots of field lines on the divertor in the JOREK runs with an ELM, an applied RMP, and an ELM mitigated by the presence of the RMP. The results for an ELM clearly show a high-n rotating footprint structure appearing during the nonlinear stage of the ELM, which is not present in the early stage of the ELM. The results for a n=2 RMP from the ELM control coils show the expected n=2 footprint structure. The results for the mitigated ELM show a similar structure, modulated by a higher n perturbation of the ELM, consistent with our theory. △ Less

Submitted 12 January, 2016; originally announced January 2016.

Comments: 13 pages, presented at the 25th IAEA Fusion Energy Conference, St. Petersburg, Russian Federation, October 13-18, 2014, paper TH/P6-1

Current understanding of the processes underlying the triggering of and energy loss associated with type I ELMs

Authors: A. Kirk, D. Dunai, M. Dunne, G. Huijsmans, S. Pamela, M. Becoulet, J. R. Harrison, J. Hillesheim, C. Roach, S. Saarelma

Abstract: The type I ELMy H-mode is the baseline operating scenario for ITER. While it is known that the type I ELM ultimately results from the peeling-ballooning instability, there is growing experimental evidence that a mode grows up before the ELM crash that may modify the edge plasma, which then leads to the ELM event due to the peeling-ballooning mode. The triggered mode results in the release of a lar… ▽ More The type I ELMy H-mode is the baseline operating scenario for ITER. While it is known that the type I ELM ultimately results from the peeling-ballooning instability, there is growing experimental evidence that a mode grows up before the ELM crash that may modify the edge plasma, which then leads to the ELM event due to the peeling-ballooning mode. The triggered mode results in the release of a large number of particles and energy from the core plasma but the precise mechanism by which these losses occur is still not fully understood and hence makes predictions for future devices uncertain. Our current understanding of the processes that trigger type I ELMs and the size of the resultant energy loss are reviewed and compared to experimental data and ideas for further development are discussed. △ Less

Submitted 16 December, 2013; originally announced December 2013.

Comments: 35 pages, 9 figures

Journal ref: Nuclear Fusion, Vol.54, No.11, November 2014, pp.114012

Towards understanding edge localised mode mitigation by resonant magnetic perturbations in MAST

Authors: I. T. Chapman, A. Kirk, C. J. Ham, J. R. Harrison, Y. Q. Liu, S. Saarelma, R. Scannell, A. J. Thornton, M. Becoulet, F. Orain, W. A. Cooper, S. Pamela, MAST Team

Abstract: Type-I Edge Localised Modes (ELMs) have been mitigated in MAST through the application of n = 3, 4 and 6 resonant magnetic perturbations (RMPs). For each toroidal mode number of the non-axisymmetric applied fields, the frequency of the ELMs has been increased significantly, and the peak heat flux on the divertor plates reduced commensurately. This increase in ELM frequency occurs despite a signifi… ▽ More Type-I Edge Localised Modes (ELMs) have been mitigated in MAST through the application of n = 3, 4 and 6 resonant magnetic perturbations (RMPs). For each toroidal mode number of the non-axisymmetric applied fields, the frequency of the ELMs has been increased significantly, and the peak heat flux on the divertor plates reduced commensurately. This increase in ELM frequency occurs despite a significant drop in the edge pressure gradient, which would be expected to stabilise the peeling-ballooning modes thought to be responsible for type-I ELMs. Various mechanisms which could cause a destabilisation of the peeling-ballooning modes are presented, including pedestal widening, plasma rotation braking, three dimensional corrugation of the plasma boundary and the existence of radially extended lobe structures near to the X-point. This leads to a model aimed at resolving the apparent dichotomy of ELM control, that is to say ELM suppression occurring due to the pedestal pressure reduction below the peeling-ballooning stability boundary, whilst the reduction in pressure can also lead to ELM mitigation, which is ostensibly a destabilisation of peeling-ballooning modes. In the case of ELM mitigation, the pedestal broadening, 3d corrugation or lobes near the X-point degrade ballooning stability so much that the pedestal recovers rapidly to cross the new stability boundary at lower pressure more frequently, whilst in the case of suppression, the plasma parameters are such that the particle transport reduces the edge pressure below the stability boundary which is only mildly affected by negligible rotation braking, small edge corrugation or short, broad lobe structures. △ Less

Submitted 16 May, 2013; originally announced May 2013.

Comments: 23 pages, 12 figures. Copyright (2013) United Kingdom Atomic Energy Authority. This article may be downloaded for personal use only. Any other use requires prior permission of the author and the American Institute of Physics

Journal ref: Phys. Plasmas 20, 056101 (2013)