-
Nanosecond pulsed barrier discharge in argon for various frequencies and theoretical analysis of 2p states density ratios for E/N determination
Authors:
Lukáš Kusýn,
Aleksandar P. Jovanović,
Detlef Loffhagen,
Markus M. Becker,
Tomáš Hoder
Abstract:
Nanosecond pulsed barrier discharges in atmospheric pressure argon are simulated using spatially one- and two-dimensional fluid-Poisson models using the reaction kinetics model presented by Stankov et al. [1], which considers all ten argon 2p states (Paschen notation) separately. The very first (single) discharge and repetitive discharges with frequencies from 5kHz to 100kHz are considered and a s…
▽ More
Nanosecond pulsed barrier discharges in atmospheric pressure argon are simulated using spatially one- and two-dimensional fluid-Poisson models using the reaction kinetics model presented by Stankov et al. [1], which considers all ten argon 2p states (Paschen notation) separately. The very first (single) discharge and repetitive discharges with frequencies from 5kHz to 100kHz are considered and a semi-automated procedure is utilized to find appropriate 2p states for electric field determination using an intensity ratio method. The proposed method is based on a time-dependent collisional-radiative model enabling a sub-nanosecond plasma diagnostics, it links the 2p state density ratios to the reduced electric field strength E/N by quantifying the excitation rate coefficients and by computing 2p states effective lifetimes from the fluid model simulation. The semi-automated procedure identifies several candidates for determination of E/N from given temporal profiles of the 2p state densities. Different approaches for effective lifetime determination are tested and applied also to measured data. The influence of radial and axial 2p state density integration on the intensity ratio method is discussed. The above mentioned models and procedures result in a flexible theory-based methodology applicable for development of new diagnostic techniques.
△ Less
Submitted 14 June, 2024;
originally announced June 2024.
-
Circularly Polarized Luminescence Without External Magnetic Fields from Individual CsPbBr3 Perovskite Quantum Dots
Authors:
Virginia Oddi,
Chenglian Zhu,
Michael A. Becker,
Yesim Sahin,
Dmitry N. Dirin,
Taehee Kim,
Rainer F. Mahrt,
Jacky Even,
Gabriele Rainò,
Maksym V. Kovalenko,
Thilo Stöferle
Abstract:
Lead halide perovskite quantum dots (QDs), the latest generation of colloidal QD family, exhibit outstanding optical properties which are now exploited as both classical and quantum light sources. Most of their rather exceptional properties are related to the peculiar exciton fine-structure of band-edge states which can support unique bright triplet excitons. The degeneracy of the bright triplet e…
▽ More
Lead halide perovskite quantum dots (QDs), the latest generation of colloidal QD family, exhibit outstanding optical properties which are now exploited as both classical and quantum light sources. Most of their rather exceptional properties are related to the peculiar exciton fine-structure of band-edge states which can support unique bright triplet excitons. The degeneracy of the bright triplet excitons is lifted with energetic splitting in the order of millielectronvolts, which can be resolved by the photoluminescence (PL) measurements of single QDs at cryogenic temperatures. Each bright exciton fine-structure-state (FSS) exhibits a dominantly linear polarization, in line with several theoretical models based on the sole crystal field, exchange interaction and shape anisotropy. Here, we show that in addition to a high degree of linear polarization, the individual exciton FSS can exhibit a non-negligible degree of circular polarization even without external magnetic fields by investigating the four Stokes parameters of the exciton fine-structure in individual CsPbBr3 QDs through Stokes polarimetric measurements. We observe a degree of circular polarization up to ~38%, which could not be detected by using the conventional polarimetric technique. In addition, we found a consistent transition from left- to right-hand circular polarization within the fine-structure triplet manifold, which was observed in magnetic field dependent experiments. Our optical investigation provides deeper insights into the nature of the exciton fine-structures and thereby drives the yet-incomplete understanding of the unique photophysical properties of this novel class of QDs, potentially opening new scenarios in chiral quantum optics.
△ Less
Submitted 2 April, 2024;
originally announced April 2024.
-
Probabilistic Photonic Computing with Chaotic Light
Authors:
Frank Brückerhoff-Plückelmann,
Hendrik Borras,
Bernhard Klein,
Akhil Varri,
Marlon Becker,
Jelle Dijkstra,
Martin Brückerhoff,
C. David Wright,
Martin Salinga,
Harish Bhaskaran,
Benjamin Risse,
Holger Fröning,
Wolfram Pernice
Abstract:
Biological neural networks effortlessly tackle complex computational problems and excel at predicting outcomes from noisy, incomplete data, a task that poses significant challenges to traditional processors. Artificial neural networks (ANNs), inspired by these biological counterparts, have emerged as powerful tools for deciphering intricate data patterns and making predictions. However, convention…
▽ More
Biological neural networks effortlessly tackle complex computational problems and excel at predicting outcomes from noisy, incomplete data, a task that poses significant challenges to traditional processors. Artificial neural networks (ANNs), inspired by these biological counterparts, have emerged as powerful tools for deciphering intricate data patterns and making predictions. However, conventional ANNs can be viewed as "point estimates" that do not capture the uncertainty of prediction, which is an inherently probabilistic process. In contrast, treating an ANN as a probabilistic model derived via Bayesian inference poses significant challenges for conventional deterministic computing architectures. Here, we use chaotic light in combination with incoherent photonic data processing to enable high-speed probabilistic computation and uncertainty quantification. Since both the chaotic light source and the photonic crossbar support multiple independent computational wavelength channels, we sample from the output distributions in parallel at a sampling rate of 70.4 GS/s, limited only by the electronic interface. We exploit the photonic probabilistic architecture to simultaneously perform image classification and uncertainty prediction via a Bayesian neural network. Our prototype demonstrates the seamless cointegration of a physical entropy source and a computational architecture that enables ultrafast probabilistic computation by parallel sampling.
△ Less
Submitted 31 January, 2024;
originally announced January 2024.
-
Enhanced Measurement of Neutral Atom Qubits with Machine Learning
Authors:
L. Phuttitarn,
B. M. Becker,
R. Chinnarasu,
T. M. Graham,
M. Saffman
Abstract:
We demonstrate qubit state measurements assisted by a supervised convolutional neural network (CNN) in a neutral atom quantum processor. We present two CNN architectures for analyzing neutral atom qubit readout data: a compact 5-layer single-qubit CNN architecture and a 6-layer multi-qubit CNN architecture. We benchmark both architectures against a conventional Gaussian threshold analysis method.…
▽ More
We demonstrate qubit state measurements assisted by a supervised convolutional neural network (CNN) in a neutral atom quantum processor. We present two CNN architectures for analyzing neutral atom qubit readout data: a compact 5-layer single-qubit CNN architecture and a 6-layer multi-qubit CNN architecture. We benchmark both architectures against a conventional Gaussian threshold analysis method. In a sparse array (9 μm atom separation) which experiences negligible crosstalk, we observed up to 32% and 56% error reduction for the multi-qubit and single-qubit architectures respectively, as compared to the benchmark. In a tightly spaced array (5 μm atom separation), which suffers from readout crosstalk, we observed up to 43% and 32% error reduction in the multi-qubit and single-qubit CNN architectures respectively, as compared to the benchmark. By examining the correlation between the predicted states of neighboring qubits, we found that the multi-qubit CNN architecture reduces the crosstalk correlation up to 78.5%. This work demonstrates a proof of concept for a CNN network to be implemented as a real-time readout processing method on a neutral atom quantum computer, enabling faster readout time and improved fidelity.
△ Less
Submitted 1 May, 2024; v1 submitted 20 November, 2023;
originally announced November 2023.
-
Towards a Machine-Learned Poisson Solver for Low-Temperature Plasma Simulations in Complex Geometries
Authors:
Ihda Chaerony Siffa,
Markus M. Becker,
Klaus-Dieter Weltmann,
Jan Trieschmann
Abstract:
Poisson's equation plays an important role in modeling many physical systems. In electrostatic self-consistent low-temperature plasma (LTP) simulations, Poisson's equation is solved at each simulation time step, which can amount to a significant computational cost for the entire simulation. In this paper, we describe the development of a generic machine-learned Poisson solver specifically designed…
▽ More
Poisson's equation plays an important role in modeling many physical systems. In electrostatic self-consistent low-temperature plasma (LTP) simulations, Poisson's equation is solved at each simulation time step, which can amount to a significant computational cost for the entire simulation. In this paper, we describe the development of a generic machine-learned Poisson solver specifically designed for the requirements of LTP simulations in complex 2D reactor geometries on structured Cartesian grids. Here, the reactor geometries can consist of inner electrodes and dielectric materials as often found in LTP simulations. The approach leverages a hybrid CNN-transformer network architecture in combination with a weighted multiterm loss function. We train the network using highly-randomized synthetic data to ensure the generalizability of the learned solver to unseen reactor geometries. The results demonstrate that the learned solver is able to produce quantitatively and qualitatively accurate solutions. Furthermore, it generalizes well on new reactor geometries such as reference geometries found in the literature. To increase the numerical accuracy of the solutions required in LTP simulations, we employ a conventional iterative solver to refine the raw predictions, especially to recover the high-frequency features not resolved by the initial prediction. With this, the proposed learned Poisson solver provides the required accuracy and is potentially faster than a pure GPU-based conventional iterative solver. This opens up new possibilities for develo** a generic and high-performing learned Poisson solver for LTP systems in complex geometries.
△ Less
Submitted 13 June, 2023;
originally announced June 2023.
-
The LHCb upgrade I
Authors:
LHCb collaboration,
R. Aaij,
A. S. W. Abdelmotteleb,
C. Abellan Beteta,
F. Abudinén,
C. Achard,
T. Ackernley,
B. Adeva,
M. Adinolfi,
P. Adlarson,
H. Afsharnia,
C. Agapopoulou,
C. A. Aidala,
Z. Ajaltouni,
S. Akar,
K. Akiba,
P. Albicocco,
J. Albrecht,
F. Alessio,
M. Alexander,
A. Alfonso Albero,
Z. Aliouche,
P. Alvarez Cartelle,
R. Amalric,
S. Amato
, et al. (1298 additional authors not shown)
Abstract:
The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their select…
▽ More
The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their selection in real time. The experiment's tracking system has been completely upgraded with a new pixel vertex detector, a silicon tracker upstream of the dipole magnet and three scintillating fibre tracking stations downstream of the magnet. The whole photon detection system of the RICH detectors has been renewed and the readout electronics of the calorimeter and muon systems have been fully overhauled. The first stage of the all-software trigger is implemented on a GPU farm. The output of the trigger provides a combination of totally reconstructed physics objects, such as tracks and vertices, ready for final analysis, and of entire events which need further offline reprocessing. This scheme required a complete revision of the computing model and rewriting of the experiment's software.
△ Less
Submitted 17 May, 2023;
originally announced May 2023.
-
Spin-charge correlations in finite one-dimensional multi-band Fermi systems
Authors:
J. M. Becker,
G. M. Koutentakis,
P. Schmelcher
Abstract:
We investigate spin-charge separation of a spin-1/2 Fermi system confined in a triple well where multiple bands are occupied. We assume that our finite fermionic system is close to fully spin polarized while being doped by a hole and an impurity fermion with opposite spin. Our setup involves ferromagnetic couplings among the particles in different bands, leading to the development of strong spin-t…
▽ More
We investigate spin-charge separation of a spin-1/2 Fermi system confined in a triple well where multiple bands are occupied. We assume that our finite fermionic system is close to fully spin polarized while being doped by a hole and an impurity fermion with opposite spin. Our setup involves ferromagnetic couplings among the particles in different bands, leading to the development of strong spin-transport correlations in an intermediate interaction regime. Interactions are then strong enough to lift the degeneracy among singlet and triplet spin configurations in the well of the spin impurity but not strong enough to prohibit hole-induced magnetic excitations to the singlet state. Despite the strong spin-hole correlations, the system exhibits spin-charge deconfinement allowing for long-range entanglement of the spatial and spin degrees of freedom.
△ Less
Submitted 14 November, 2023; v1 submitted 16 May, 2023;
originally announced May 2023.
-
Catalog of Ultraviolet Bright Stars (CUBS): Strategies for UV occultation measurements, planetary illumination modeling, and sky map analyses using hybrid IUE-Kurucz spectra
Authors:
M. A. Velez,
K. D. Retherford,
V. Hue,
J. A. Kammer,
T. M. Becker,
G. R. Gladstone,
M. W. Davis,
T. K. Greathouse,
P. M. Molyneux,
S. M. Brooks,
U. Raut,
M. H. Versteeg
Abstract:
Ultraviolet spectroscopy is a powerful method to study planetary surface composition through reflectance measurements and atmospheric composition through stellar/solar occultations, transits of other planetary bodies, and direct imaging of airglow and auroral emissions. The next generation of ultraviolet spectrographs (UVS) on board ESA's JUICE (Jupiter Icy Moons Explorer) and NASA's Europa Clippe…
▽ More
Ultraviolet spectroscopy is a powerful method to study planetary surface composition through reflectance measurements and atmospheric composition through stellar/solar occultations, transits of other planetary bodies, and direct imaging of airglow and auroral emissions. The next generation of ultraviolet spectrographs (UVS) on board ESA's JUICE (Jupiter Icy Moons Explorer) and NASA's Europa Clipper missions will perform such measurements of Jupiter and its moons in the early 2030's. This work presents a compilation of a detailed UV stellar catalog, named CUBS, of targets with high intensity in the 50-210 nm wavelength range with applications relevant to planetary spectroscopy. These applications include: 1) Planning and simulating occultations, including calibration measurements; 2) Modeling starlight illumination of dark, nightside planetary surfaces primarily lit by the sky; and 3) Studying the origin of diffuse galactic UV light as mapped by existing datasets from Juno-UVS and others. CUBS includes information drawn from resources such as the International Ultraviolet Explorer (IUE) catalog and SIMBAD. We have constructed model spectra at 0.1 nm resolution for almost 90,000 targets using Kurucz models and, when available, IUE spectra. CUBS also includes robust checks for agreement between the Kurucz models and the IUE data. We also present a tool for which our catalog can be used to identify the best candidates for stellar occultation observations, with applications for any UV instrument. We report on our methods for producing CUBS and discuss plans for its implementation during ongoing and upcoming planetary missions.
△ Less
Submitted 7 March, 2023;
originally announced March 2023.
-
Probing Ganymede's atmosphere with HST Ly$α$ images in transit of Jupiter
Authors:
Lorenz Roth,
Gregorio Marchesini,
Tracy M. Becker,
H. Jens Hoeijmakers,
Philippa M. Molyneux,
Kurt D. Retherford,
Joachim Saur,
Shane R. Carberry Mogan,
Jamey R. Szalay
Abstract:
We report results from far-ultraviolet observations by the Hubble Space Telescope of Jupiter's largest moon Ganymede transiting across the planet's dayside hemisphere. {Within} a targeted campaign on 9 September 2021 two exposures were taken during one transit passage to probe for attenuation of Jupiter's hydrogen Lyman-$α$ dayglow above the moon limb. The background dayglow is slightly attenuated…
▽ More
We report results from far-ultraviolet observations by the Hubble Space Telescope of Jupiter's largest moon Ganymede transiting across the planet's dayside hemisphere. {Within} a targeted campaign on 9 September 2021 two exposures were taken during one transit passage to probe for attenuation of Jupiter's hydrogen Lyman-$α$ dayglow above the moon limb. The background dayglow is slightly attenuated over an extended region around Ganymede, with stronger attenuation in the second exposure when Ganymede was near the planet's center. In the first exposure when the moon was closer to Jupiter's limb, the effects from the Ganymede corona are hardly detectable, likely because the Jovian Lyman-$α$ dayglow is spectrally broader and less intense at this viewing geometry. The obtained vertical H column densities of around $(1-2)\times 10^{12}$~cm$^{-2}$ are consistent with previous results. Constraining angular variability around Ganymede's disk, we derive an upper limit on a local H$_2$O column density of $(2-3)\times 10^{16}$~cm$^{-2}$, such as could arise from outgassing plumes in regions near the observed moon limb.
△ Less
Submitted 13 January, 2023;
originally announced January 2023.
-
Formation mechanisms of striations in a filamentary dielectric barrier discharge in atmospheric pressure argon
Authors:
Aleksandar P. Jovanović,
Tomáš Hoder,
Hans Höft,
Detlef Loffhagen,
Markus M. Becker
Abstract:
Formation mechanisms of striations along the discharge channel of a single-filament dielectric barrier discharge (DBD) in argon at atmospheric pressure are investigated by means of a time-dependent, spatially two-dimensional fluid-Poisson model. The model is applied to a one-sided DBD arrangement with a 1.5 mm gap using a sinusoidal high voltage at the powered metal electrode. The discharge condit…
▽ More
Formation mechanisms of striations along the discharge channel of a single-filament dielectric barrier discharge (DBD) in argon at atmospheric pressure are investigated by means of a time-dependent, spatially two-dimensional fluid-Poisson model. The model is applied to a one-sided DBD arrangement with a 1.5 mm gap using a sinusoidal high voltage at the powered metal electrode. The discharge conditions are chosen to mimic experimental conditions for which striations have been observed. It is found that the striations form in both half-periods during the transient glow phase, which follows the streamer breakdown phase. The modelling results show that the distinct striated structures feature local spatial maxima and minima in charged and excited particle densities, which are more pronounced during the positive polarity. Their formation is explained by a repetitive stepwise ionisation of metastable argon atoms and ionisation of excimers, causing a disturbance of the spatial distribution of charge carriers along the discharge channel. The results emphasise the importance of excited states and stepwise ionisation processes on the formation of repetitive ionisation waves, eventually leading to striations along the discharge channel.
△ Less
Submitted 12 March, 2023; v1 submitted 15 December, 2022;
originally announced December 2022.
-
Introduction and verification of FEDM, an open-source FEniCS-based discharge modelling code
Authors:
Aleksandar P. Jovanović,
Detlef Loffhagen,
Markus M. Becker
Abstract:
This paper introduces the FEDM (Finite Element Discharge Modelling) code, which was developed using the open-source computing platform FEniCS (https://fenicsproject.org). Building on FEniCS, the FEDM code utilises the finite element method to solve partial differential equations. It extends FEniCS with features that allow the automated implementation and numerical solution of fully-coupled fluid-P…
▽ More
This paper introduces the FEDM (Finite Element Discharge Modelling) code, which was developed using the open-source computing platform FEniCS (https://fenicsproject.org). Building on FEniCS, the FEDM code utilises the finite element method to solve partial differential equations. It extends FEniCS with features that allow the automated implementation and numerical solution of fully-coupled fluid-Poisson models including an arbitrary number of particle balance equations. The code is verified using the method of exact solutions and benchmarking. The physically based examples of a time-of-flight experiment, a positive streamer discharge in atmospheric-pressure air and a low-pressure glow discharge in argon are used as rigorous test cases for the developed modelling code and to illustrate its capabilities. The performance of the code is compared to the commercial software package COMSOL Multiphysics\textsuperscript{\textregistered} and a comparable parallel speed-up is obtained. It is shown that the iterative solver implemented by FEDM performs particularly well on high-performance compute clusters.
△ Less
Submitted 20 February, 2023; v1 submitted 2 December, 2022;
originally announced December 2022.
-
Ferroelectricity and resistive switching in BaTiO$_3$ thin films with liquid electrolyte top contact for bioelectronic devices
Authors:
Maximilian T. Becker,
Poppy Oldroyd,
Nives Strkalj,
Moritz L. Müller,
George G. Malliaras,
Judith L. MacManus-Driscoll
Abstract:
We investigate ferroelectric- and resistive switching behavior in 18-nm-thick epitaxial BaTiO$_3$ (BTO) films in a model electrolyte-ferroelectric-semiconductor (EFS) configuration. The system is explored for its potential as a ferroelectric microelectrode in bioelectronics. The BTO films are grown by pulsed laser deposition (PLD) on semiconducting Nb-doped (0.5 wt\%) SrTiO$_{3}$ (Nb:STO) single c…
▽ More
We investigate ferroelectric- and resistive switching behavior in 18-nm-thick epitaxial BaTiO$_3$ (BTO) films in a model electrolyte-ferroelectric-semiconductor (EFS) configuration. The system is explored for its potential as a ferroelectric microelectrode in bioelectronics. The BTO films are grown by pulsed laser deposition (PLD) on semiconducting Nb-doped (0.5 wt\%) SrTiO$_{3}$ (Nb:STO) single crystal substrates. The ferroelectric properties of the bare BTO films are demonstrated by piezoresponse force microscopy (PFM) measurements. Cyclic voltammetry (CV) measurements in EFS configuration, with phosphate buffered saline (PBS) acting as the liquid electrolyte top contact, indicate characteristic ferroelectric switching peaks in the bipolar current-voltage loop. The ferroelectric nature of the observed switching peaks is confirmed by analyzing the current response of the EFS devices to unipolar voltage signals. Moreover, electrochemical impedance spectroscopy (EIS) measurements indicate bipolar resisitive switching behavior of the EFS devices, which is controlled by the remanent polarization state of the BTO layer. Our results represent a constitutive step towards the realization of neuroprosthetic implants and hybrid neurocomputational systems based on ferroelectric microelectrodes.
△ Less
Submitted 16 September, 2022;
originally announced September 2022.
-
2022 Review of Data-Driven Plasma Science
Authors:
Rushil Anirudh,
Rick Archibald,
M. Salman Asif,
Markus M. Becker,
Sadruddin Benkadda,
Peer-Timo Bremer,
Rick H. S. Budé,
C. S. Chang,
Lei Chen,
R. M. Churchill,
Jonathan Citrin,
Jim A Gaffney,
Ana Gainaru,
Walter Gekelman,
Tom Gibbs,
Satoshi Hamaguchi,
Christian Hill,
Kelli Humbird,
Sören Jalas,
Satoru Kawaguchi,
Gon-Ho Kim,
Manuel Kirchen,
Scott Klasky,
John L. Kline,
Karl Krushelnick
, et al. (38 additional authors not shown)
Abstract:
Data science and technology offer transformative tools and methods to science. This review article highlights latest development and progress in the interdisciplinary field of data-driven plasma science (DDPS). A large amount of data and machine learning algorithms go hand in hand. Most plasma data, whether experimental, observational or computational, are generated or collected by machines today.…
▽ More
Data science and technology offer transformative tools and methods to science. This review article highlights latest development and progress in the interdisciplinary field of data-driven plasma science (DDPS). A large amount of data and machine learning algorithms go hand in hand. Most plasma data, whether experimental, observational or computational, are generated or collected by machines today. It is now becoming impractical for humans to analyze all the data manually. Therefore, it is imperative to train machines to analyze and interpret (eventually) such data as intelligently as humans but far more efficiently in quantity. Despite the recent impressive progress in applications of data science to plasma science and technology, the emerging field of DDPS is still in its infancy. Fueled by some of the most challenging problems such as fusion energy, plasma processing of materials, and fundamental understanding of the universe through observable plasma phenomena, it is expected that DDPS continues to benefit significantly from the interdisciplinary marriage between plasma science and data science into the foreseeable future.
△ Less
Submitted 31 May, 2022;
originally announced May 2022.
-
The Forward Physics Facility at the High-Luminosity LHC
Authors:
Jonathan L. Feng,
Felix Kling,
Mary Hall Reno,
Juan Rojo,
Dennis Soldin,
Luis A. Anchordoqui,
Jamie Boyd,
Ahmed Ismail,
Lucian Harland-Lang,
Kevin J. Kelly,
Vishvas Pandey,
Sebastian Trojanowski,
Yu-Dai Tsai,
Jean-Marco Alameddine,
Takeshi Araki,
Akitaka Ariga,
Tomoko Ariga,
Kento Asai,
Alessandro Bacchetta,
Kincso Balazs,
Alan J. Barr,
Michele Battistin,
Jianming Bian,
Caterina Bertone,
Weidong Bai
, et al. (211 additional authors not shown)
Abstract:
High energy collisions at the High-Luminosity Large Hadron Collider (LHC) produce a large number of particles along the beam collision axis, outside of the acceptance of existing LHC experiments. The proposed Forward Physics Facility (FPF), to be located several hundred meters from the ATLAS interaction point and shielded by concrete and rock, will host a suite of experiments to probe Standard Mod…
▽ More
High energy collisions at the High-Luminosity Large Hadron Collider (LHC) produce a large number of particles along the beam collision axis, outside of the acceptance of existing LHC experiments. The proposed Forward Physics Facility (FPF), to be located several hundred meters from the ATLAS interaction point and shielded by concrete and rock, will host a suite of experiments to probe Standard Model (SM) processes and search for physics beyond the Standard Model (BSM). In this report, we review the status of the civil engineering plans and the experiments to explore the diverse physics signals that can be uniquely probed in the forward region. FPF experiments will be sensitive to a broad range of BSM physics through searches for new particle scattering or decay signatures and deviations from SM expectations in high statistics analyses with TeV neutrinos in this low-background environment. High statistics neutrino detection will also provide valuable data for fundamental topics in perturbative and non-perturbative QCD and in weak interactions. Experiments at the FPF will enable synergies between forward particle production at the LHC and astroparticle physics to be exploited. We report here on these physics topics, on infrastructure, detector, and simulation studies, and on future directions to realize the FPF's physics potential.
△ Less
Submitted 9 March, 2022;
originally announced March 2022.
-
Automated Fluid Model Generation and Numerical Analysis of Dielectric Barrier Discharges Using Comsol
Authors:
A. P. Jovanović,
M. N. Stankov,
D. Loffhagen,
M. M. Becker
Abstract:
MCPlas is introduced as a powerful tool for automated fluid model generation with application to the analysis of dielectric barrier discharges operating in different regimes. MCPlas consists of a number of MATLAB\textsuperscript{\textregistered} scripts and uses the COMSOL Multiphysics\textsuperscript{\textregistered} module LiveLink\textsuperscript{\texttrademark} for MATLAB\textsuperscript{\text…
▽ More
MCPlas is introduced as a powerful tool for automated fluid model generation with application to the analysis of dielectric barrier discharges operating in different regimes. MCPlas consists of a number of MATLAB\textsuperscript{\textregistered} scripts and uses the COMSOL Multiphysics\textsuperscript{\textregistered} module LiveLink\textsuperscript{\texttrademark} for MATLAB\textsuperscript{\textregistered} to build up equation-based COMSOL Multiphysics\textsuperscript{\textregistered} models from scratch. The present contribution highlights how MCPlas is used to implement time-dependent models for non-thermal plasmas in spatially one-dimensional and axisymmetric two-dimensional geometries and stresses out the benefit of automation of the modelling procedure. The modelling codes generated by MCPlas are used to study diffuse and filamentary dielectric barrier discharges in argon at sub-atmospheric and atmospheric pressure, respectively. The seamless transition between different levels of model complexity with respect to the considered model geometry is demonstrated. The presented investigation of a single-filament dielectric barrier discharge interacting with a dielectric surface shows that complex phenomena of high technological relevance can be tackled by using plasma models implemented in COMSOL Multiphysics\textsuperscript{\textregistered} via MCPlas.
△ Less
Submitted 19 January, 2022;
originally announced January 2022.
-
Thermal tuning of a fiber-integrated Fabry-Pérot cavity
Authors:
Clemens Singer,
Alexander Goetz,
Adarsh S. Prasad,
Martin Becker,
Manfred Rothhardt,
Sarah M. Skoff
Abstract:
Here, we present the thermal tuning capability of an alignment-free fiber-integrated Fabry-Pérot cavity.The two mirrors are made of fiber Bragg gratings that can be individually temperature stabilized and tuned. We show the temperature tuning of the resonance wavelength of the cavity without any degradation of the finesse and the tuning of the individual stop bands of the fiber Bragg gratings. Thi…
▽ More
Here, we present the thermal tuning capability of an alignment-free fiber-integrated Fabry-Pérot cavity.The two mirrors are made of fiber Bragg gratings that can be individually temperature stabilized and tuned. We show the temperature tuning of the resonance wavelength of the cavity without any degradation of the finesse and the tuning of the individual stop bands of the fiber Bragg gratings. This not only permits for the cavity's finesse to be optimized post-fabrication but also makes this cavity applicable as a narrowband filter with a FWHM spectral width of 0.07 (0.02) pm and a suppression of more than -15 dB that can be wavelength tuned. Further, in the field of quantum optics, where strong light-matter interactions are desirable, quantum emitters can be coupled to such a cavity and the cavity effect can be reversibly omitted and re-established. This is particularly useful when working with solid-state quantum emitters where such a reference measurement is often not possible once an emitter has been permanently deposited inside a cavity.
△ Less
Submitted 25 May, 2021;
originally announced May 2021.
-
Extracellular electrical stimulation by ferroelectric displacement current in the switching regime
Authors:
M. Becker
Abstract:
We analyze the extracellular stimulation current and the charge injection capacitity (CIC) of microelectrodes coated with an insulating layer to prevent toxic electrochemical effects in bioelectronic applications. We show for a microelectrode coated with an insulating ferroelectric layer, that the ferroelectric polarization current contributes to the extracellular stimulation current. Depending on…
▽ More
We analyze the extracellular stimulation current and the charge injection capacitity (CIC) of microelectrodes coated with an insulating layer to prevent toxic electrochemical effects in bioelectronic applications. We show for a microelectrode coated with an insulating ferroelectric layer, that the ferroelectric polarization current contributes to the extracellular stimulation current. Depending on the remanent polarization $P_{\rm r}$ of the ferroelectric, the polarization current in the switching regime can increase the CIC by up to two orders of magnitude as compared to the commonly used extracellular capacitive stimulation with microelectrodes that are coated with a dielectric layer.
△ Less
Submitted 9 March, 2021;
originally announced March 2021.
-
The Future Of The Arecibo Observatory: The Next Generation Arecibo Telescope
Authors:
D. Anish Roshi,
N. Aponte,
E. Araya,
H. Arce,
L. A. Baker,
W. Baan,
T. M. Becker,
J. K. Breakall,
R. G. Brown,
C. G. M. Brum,
M. Busch,
D. B. Campbell,
T. Cohen,
F. Cordova,
J. S. Deneva,
M. Devogele,
T. Dolch,
F. O. Fernandez-Rodriguez,
T. Ghosh,
P. F. Goldsmith,
L. I. Gurvits,
M. Haynes,
C. Heiles,
J. W. T. Hessel,
D. Hickson
, et al. (49 additional authors not shown)
Abstract:
The Arecibo Observatory (AO) is a multidisciplinary research and education facility that is recognized worldwide as a leading facility in astronomy, planetary, and atmospheric and space sciences. AO's cornerstone research instrument was the 305-m William E. Gordon telescope. On December 1, 2020, the 305-m telescope collapsed and was irreparably damaged. In the three weeks following the collapse, A…
▽ More
The Arecibo Observatory (AO) is a multidisciplinary research and education facility that is recognized worldwide as a leading facility in astronomy, planetary, and atmospheric and space sciences. AO's cornerstone research instrument was the 305-m William E. Gordon telescope. On December 1, 2020, the 305-m telescope collapsed and was irreparably damaged. In the three weeks following the collapse, AO's scientific and engineering staff and the AO users community initiated extensive discussions on the future of the observatory. The community is in overwhelming agreement that there is a need to build an enhanced, next-generation radar-radio telescope at the AO site. From these discussions, we established the set of science requirements the new facility should enable. These requirements can be summarized briefly as: 5 MW of continuous wave transmitter power at 2 - 6 GHz, 10 MW of peak transmitter power at 430 MHz (also at 220MHz under consideration), zenith angle coverage 0 to 48 deg, frequency coverage 0.2 to 30 GHz and increased Field-of-View. These requirements determine the unique specifications of the proposed new instrument. The telescope design concept we suggest consists of a compact array of fixed dishes on a tiltable, plate-like structure with a collecting area equivalent to a 300m dish. This concept, referred to as the Next Generation Arecibo Telescope (NGAT), meets all of the desired specifications and provides significant new science capabilities to all three research groups at AO. This whitepaper presents a sample of the wide variety of the science that can be achieved with the NGAT, the details of the telescope design concept and the need for the new telescope to be located at the AO site. We also discuss other AO science activities that interlock with the NGAT in the white paper.
△ Less
Submitted 1 April, 2021; v1 submitted 1 March, 2021;
originally announced March 2021.
-
Photoluminescence of nitrogen-vacancy and silicon-vacancy color centers in phosphorus-doped diamond at room and higher temperatures
Authors:
F. Sledz,
S. Piccolomo,
A. M. Flatae,
S. Lagomarsino,
R. Rechenberg,
M. F. Becker,
S. Sciortino,
N. Gelli,
I. A. Khramtsov,
D. Yu. Fedyanin,
G. Speranza,
L. Giuntini,
M. Agio
Abstract:
Phosphorus-doped diamond is relevant for applications in sensing, optoelectronics and quantum photonics, since the unique optical properties of color centers in diamond can be combined with the n-type conductivity attained by the inclusion of phosphorus. Here, we investigate the photoluminescence signal of the nitrogen-vacancy and silicon-vacancy color centers in phosphorus-doped diamond as a func…
▽ More
Phosphorus-doped diamond is relevant for applications in sensing, optoelectronics and quantum photonics, since the unique optical properties of color centers in diamond can be combined with the n-type conductivity attained by the inclusion of phosphorus. Here, we investigate the photoluminescence signal of the nitrogen-vacancy and silicon-vacancy color centers in phosphorus-doped diamond as a function of temperature starting from ambient conditions up to about 100$^\circ$ Celsius, focusing on the zero-phonon line (ZPL). We find that the wavelength and width of the ZPL of the two color centers exhibit a comparable dependence on temperature, despite the strong difference in the photoluminescence spectra. Moreover, the temperature sensitivity of the ZPL of the silicon-vacancy center is not significantly affected by phosphorus-do**, as we infer by comparison with silicon-vacancy centers in electronic-grade single-crystal diamond.
△ Less
Submitted 14 January, 2021;
originally announced January 2021.
-
Impact of natural disasters on consumer behavior: case of the 2017 El Nino phenomenon in Peru
Authors:
Hugo Alatrista-Salas,
Vincent Gauthier,
Miguel Nunez-del-Prado,
Monique Becker
Abstract:
El Nino is an extreme weather event featuring unusual warming of surface waters in the eastern equatorial Pacific Ocean. This phenomenon is characterized by heavy rains and floods that negatively affect the economic activities of the impacted areas. Understanding how this phenomenon influences consumption behavior at different granularity levels is essential for recommending strategies to normaliz…
▽ More
El Nino is an extreme weather event featuring unusual warming of surface waters in the eastern equatorial Pacific Ocean. This phenomenon is characterized by heavy rains and floods that negatively affect the economic activities of the impacted areas. Understanding how this phenomenon influences consumption behavior at different granularity levels is essential for recommending strategies to normalize the situation. With this aim, we performed a multi-scale analysis of data associated with bank transactions involving credit and debit cards. Our findings can be summarized into two main results: Coarse-grained analysis reveals the presence of the El Niño phenomenon and the recovery time in a given territory, while fine-grained analysis demonstrates a change in individuals' purchasing patterns and in merchant relevance as a consequence of the climatic event. The results also indicate that society successfully withstood the natural disaster owing to the economic structure built over time. In this study, we present a new method that may be useful for better characterizing future extreme events.
△ Less
Submitted 11 August, 2020;
originally announced August 2020.
-
Nanofiber-based high-Q microresonator for cryogenic applications
Authors:
Johanna Hütner,
Thomas Hoinkes,
Martin Becker,
Manfred Rothhardt,
Arno Rauschenbeutel,
Sarah M. Skoff
Abstract:
We demonstrate a cryo-compatible, fully fiber-integrated, alignment-free optical microresonator. The compatibility with low temperatures expands its possible applications to the wide field of solid-state quantum optics, where a cryogenic environment is often a requirement. At a temperature of 4.6 K we obtain a quality factor of $\mathbf{(9.9 \pm 0.7) \times 10^6}$. In conjunction with the small mo…
▽ More
We demonstrate a cryo-compatible, fully fiber-integrated, alignment-free optical microresonator. The compatibility with low temperatures expands its possible applications to the wide field of solid-state quantum optics, where a cryogenic environment is often a requirement. At a temperature of 4.6 K we obtain a quality factor of $\mathbf{(9.9 \pm 0.7) \times 10^6}$. In conjunction with the small mode volume provided by the nanofiber, this cavity can be either used in the coherent dynamics or the fast cavity regime, where it can provide a Purcell factor of up to 15. Our resonator is therefore suitable for significantly enhancing the coupling between light and a large variety of different quantum emitters and due to its proven performance over a wide temperature range, also lends itself for the implementation of quantum hybrid systems.
△ Less
Submitted 4 January, 2020;
originally announced January 2020.
-
Silicon-vacancy color centers in phosphorus-doped diamond
Authors:
Assegid Mengistu Flatae,
Stefano Lagomarsino,
Florian Sledz,
Navid Soltani,
Shannon S. Nicley,
Ken Haenen,
Robert Rechenberg,
Michael F. Becker,
Silvio Sciortino,
Nicla Gelli,
Lorenzo Giuntini,
Francesco Taccetti,
Mario Agio
Abstract:
The controlled creation of color centers in phosphorus-doped (n-type) diamond can facilitate the electronics integration of quantum photonics devices, such as single-photon sources operating upon electrical injection. Silicon vacancy (SiV) color centers are promising candidates, but so far the conditions for single-photon emission in phosphorus-doped diamond have not been investigated. In this stu…
▽ More
The controlled creation of color centers in phosphorus-doped (n-type) diamond can facilitate the electronics integration of quantum photonics devices, such as single-photon sources operating upon electrical injection. Silicon vacancy (SiV) color centers are promising candidates, but so far the conditions for single-photon emission in phosphorus-doped diamond have not been investigated. In this study, we create SiV color centers in diamond samples with different phosphorus concentrations and show that the fluorescence background due to do**, nitrogen-impurities and ion implantation induced defects can be significantly suppressed. Single-photon emitters in phosphorus-doped diamond are obtained at the low Si-ion implantation fluences.
△ Less
Submitted 19 December, 2019;
originally announced December 2019.
-
The BGOOD experimental setup at ELSA
Authors:
S. Alef,
P. Bauer,
D. Bayadilov,
R. Beck,
M. Becker,
A. Bella,
J. Bieling,
S. Boese,
A. Braghieri,
K. -Th. Brinkmann,
P. Cole,
R. Di Salvo,
D. Elsner,
A. Fantini,
O. Freyermuth,
F. Frommberger,
G. Gervino,
F. Ghio,
S. Goertz,
A. Gridnev,
E. Gutz,
D. Hammann,
J. Hannappel,
W. Hillert,
O. Jahn
, et al. (36 additional authors not shown)
Abstract:
The BGOOD experiment at the ELSA facility in Bonn has been commissioned within the framework of an international collaboration. The experiment pursues a systematic investigation of non-strange and strange meson photoproduction, in particular $t$-channel processes at low momentum transfer. The setup uniquely combines a central almost $4π$ acceptance BGO crystal calorimeter with a large aperture for…
▽ More
The BGOOD experiment at the ELSA facility in Bonn has been commissioned within the framework of an international collaboration. The experiment pursues a systematic investigation of non-strange and strange meson photoproduction, in particular $t$-channel processes at low momentum transfer. The setup uniquely combines a central almost $4π$ acceptance BGO crystal calorimeter with a large aperture forward magnetic spectrometer providing excellent detection of both neutral and charged particles, complementary to other setups such as Crystal Barrel, Crystal Ball, LEPS and CLAS.
△ Less
Submitted 18 February, 2020; v1 submitted 24 October, 2019;
originally announced October 2019.
-
Revisiting Effects of Nitrogen Incorporation and Graphitization on Conductivity of Ultra-nano-crystalline Diamond Films
Authors:
Tanvi Nikhar,
Robert Rechenberg,
Michael Becker,
Sergey V. Baryshev
Abstract:
Detailed structural and electrical properties of ultra-nano-crystalline diamond (UNCD) films grown in H$_\text{2}$/CH$_\text{4}$/N$_\text{2}$ plasma were systematically studied as a function of deposition temperature ($T_d$) and nitrogen content ($\%$ N$_2$) to thoroughly evaluate their effects on conductivity. $T_d$ was scanned from 1000 to 1300 K for N$_2$ fixed at 0, 5, 10 and 20 $\%$. It was f…
▽ More
Detailed structural and electrical properties of ultra-nano-crystalline diamond (UNCD) films grown in H$_\text{2}$/CH$_\text{4}$/N$_\text{2}$ plasma were systematically studied as a function of deposition temperature ($T_d$) and nitrogen content ($\%$ N$_2$) to thoroughly evaluate their effects on conductivity. $T_d$ was scanned from 1000 to 1300 K for N$_2$ fixed at 0, 5, 10 and 20 $\%$. It was found that even the films grown in the synthetic gas mixture with no nitrogen could be made as conductive as 1$-$10$^{-2}$ $Ω$ cm with overall resistivity of all the films tuned over 4 orders of magnitude through varying growth parameters. On a set of 27 samples, Raman spectroscopy and scanning electron microscopy show a progressive and highly reproducible film material phase transformation, from ultra-nano-crystalline diamond to nano-crystalline graphite as deposition temperature increases. The rate of this transformation is heavily dependent on N$_2$ content. Addition of nitrogen greatly increases the amount of $sp^2$ bonded carbon in the films thus enhancing the physical connectivity in the GB network that have high electronic density of states. However, addition of nitrogen greatly slows down crystallization of $sp^2$ phase in the GBs. Therefore, proper balance between GB connectivity and crystallinity is the key in conductivity engineering of (N)UNCD.
△ Less
Submitted 21 October, 2019;
originally announced October 2019.
-
Plasma-MDS, a metadata schema for plasma science with examples from plasma technology
Authors:
Steffen Franke,
Lucian Paulet,
Jan Schäfer,
Deborah O'Connell,
Markus M. Becker
Abstract:
A metadata schema, named Plasma-MDS, is introduced to support research data management in plasma science. Plasma-MDS is suitable to facilitate the publication of research data following the FAIR principles in domain-specific repositories and with this the reuse of research data for data driven plasma science. In accordance with common features in plasma science and technology, the metadata schema…
▽ More
A metadata schema, named Plasma-MDS, is introduced to support research data management in plasma science. Plasma-MDS is suitable to facilitate the publication of research data following the FAIR principles in domain-specific repositories and with this the reuse of research data for data driven plasma science. In accordance with common features in plasma science and technology, the metadata schema bases on the concept to separately describe the source generating the plasma, the medium in which the plasma is operated in, the target the plasma is acting on, and the diagnostics used for investigation of the process under consideration. These four basic schema elements are supplemented by a schema element with various attributes for description of the resources, i.e. the digital data obtained by the applied diagnostic procedures. The metadata schema is first applied for the annotation of datasets published in INPTDAT -- the interdisciplinary data platform for plasma technology.
△ Less
Submitted 18 December, 2020; v1 submitted 17 July, 2019;
originally announced July 2019.
-
Electrostatic accelerated electrons within symmetric capacitors during field emission condition events exert bidirectional propellant-less thrust
Authors:
Ankur S. Bhatt,
F. M. Becker
Abstract:
During internal discharge (electrical breakdown by field emission transmission) thin symmetric capacitors accelerate slightly towards the anode; an anomaly that does not appear obvious using standard physics. Various thicknesses of discharging capacitors have been used to demonstrate and better characterize this phenomenon. It was observed that it is possible to reverse the force by adding conduct…
▽ More
During internal discharge (electrical breakdown by field emission transmission) thin symmetric capacitors accelerate slightly towards the anode; an anomaly that does not appear obvious using standard physics. Various thicknesses of discharging capacitors have been used to demonstrate and better characterize this phenomenon. It was observed that it is possible to reverse the force by adding conductive materials in the immediate proximity of the cathode when physically separated from the anode (thus not galvanically connected). Conversely, the addition of conductive materials in the area surrounding the anode did not alter the original force observed. The data gathered seems to confirm a phenomenon that could be exploited for propulsion purposes, in particular for fuel-less applications in a vacuum. The results could be correlated to an external cause which appear to be influenced by the particles' acceleration. Overall, the preliminary results are encouraging for practical engineering purposes.
△ Less
Submitted 17 June, 2019; v1 submitted 10 October, 2018;
originally announced October 2018.
-
Towards an integrated modeling of the plasma-solid interface
Authors:
M Bonitz,
A Filinov,
J W Abraham,
K Balzer,
H Kählert,
E Pehlke,
FX Bronold,
M Pamperin,
M M Becker,
D Loffhagen,
H Fehske
Abstract:
Solids facing a plasma are a common situation in many astrophysical systems and laboratory setups. Moreover, many plasma technology applications rely on the control of the plasma-surface interaction. However, presently often a fundamental understanding of them is missing, so most technological applications are being developed via trial and error. In the majority of plasma simulations surface proce…
▽ More
Solids facing a plasma are a common situation in many astrophysical systems and laboratory setups. Moreover, many plasma technology applications rely on the control of the plasma-surface interaction. However, presently often a fundamental understanding of them is missing, so most technological applications are being developed via trial and error. In the majority of plasma simulations surface processes are either neglected or treated via phenomenological parameters such as sticking coefficients, sputter rates or secondary electron emission coefficients. However, those parameters are known only in some cases and with very limited accuracy. Similarly, while surface physics simulations have often studied the impact of single ions or neutrals, so far, the influence of a plasma medium and correlations between successive impacts have not been taken into account. Such an approach cannot have predictive power. In this paper we discuss in some detail the physical processes a the plasma-solid interface which brings us to the necessity of coupled plasma-solid simulations. We briefly summarize relevant theoretical methods from solid state and surface physics that are suitable to contribute to such an approach and identify four methods. The first are mesoscopic simulations such as kinetic Monte Carlo (KMC) and molecular dynamics (MD) that are able to treat complex processes on large scales but neglect electronic effects. The second are quantum kinetic methods based on the quantum Boltzmann equation that give access to a more accurate treatment of surface processes using simplifying models for the solid. The third approach are ab initio simulations of surface process that are based on density functional theory (DFT) and time-dependent DFT. The fourths are nonequilibrium Green functions that able to treat correlation effects in the material and at the interface.
△ Less
Submitted 7 September, 2018;
originally announced September 2018.
-
Two-color Multiphoton Emission from Nanotips
Authors:
Wayne Cheng-Wei Huang,
Maria Becker,
Joshua Beck,
Herman Batelaan
Abstract:
Two-color multiphoton emission from polycrystalline tungsten nanotips has been demonstrated using two-color laser fields. The two-color photoemission is assisted by a three-photon multicolor quantum channel, which leads to a twofold increase in quantum efficiency. Weak-field control of two-color multiphoton emission was achieved by changing the efficiency of the quantum channel with pulse delay. T…
▽ More
Two-color multiphoton emission from polycrystalline tungsten nanotips has been demonstrated using two-color laser fields. The two-color photoemission is assisted by a three-photon multicolor quantum channel, which leads to a twofold increase in quantum efficiency. Weak-field control of two-color multiphoton emission was achieved by changing the efficiency of the quantum channel with pulse delay. The result of this study complements two-color tunneling photoemission in strong fields, and has potential applications for nanowire-based photonic devices. Moreover, the demonstrated two-color multiphoton emission may be important for realizing ultrafast spin-polarized electron sources via optically injected spin current.
△ Less
Submitted 5 January, 2017;
originally announced January 2017.
-
MixedTrails: Bayesian hypothesis comparison on heterogeneous sequential data
Authors:
Martin Becker,
Florian Lemmerich,
Philipp Singer,
Markus Strohmaier,
Andreas Hotho
Abstract:
Sequential traces of user data are frequently observed online and offline, e.g., as sequences of visited websites or as sequences of locations captured by GPS. However, understanding factors explaining the production of sequence data is a challenging task, especially since the data generation is often not homogeneous. For example, navigation behavior might change in different phases of browsing a…
▽ More
Sequential traces of user data are frequently observed online and offline, e.g., as sequences of visited websites or as sequences of locations captured by GPS. However, understanding factors explaining the production of sequence data is a challenging task, especially since the data generation is often not homogeneous. For example, navigation behavior might change in different phases of browsing a website, or movement behavior may vary between groups of users. In this work, we tackle this task and propose MixedTrails, a Bayesian approach for comparing the plausibility of hypotheses regarding the generative processes of heterogeneous sequence data. Each hypothesis is derived from existing literature, theory or intuition and represents a belief about transition probabilities between a set of states that can vary between groups of observed transitions. For example, when trying to understand human movement in a city and given some observed data, a hypothesis assuming tourists to be more likely to move towards points of interests than locals, can be shown to be more plausible than a hypothesis assuming the opposite. Our approach incorporates such hypotheses as Bayesian priors in a generative mixed transition Markov chain model, and compares their plausibility utilizing Bayes factors. We discuss analytical and approximate inference methods for calculating the marginal likelihoods for Bayes factors, give guidance on interpreting the results, and illustrate our approach with several experiments on synthetic and empirical data from Wikipedia and Flickr. Thus, this work enables a novel kind of analysis for studying sequential data in many application areas.
△ Less
Submitted 11 July, 2017; v1 submitted 21 December, 2016;
originally announced December 2016.
-
Advanced fluid modelling and PIC/MCC simulations of low-pressure ccrf discharges
Authors:
Markus M. Becker,
Hanno Kählert,
Anbang Sun,
Michael Bonitz,
Detlef Loffhagen
Abstract:
Comparative studies of capacitively coupled radio-frequency discharges in helium and argon at pressures between 10 and 80 Pa are presented applying two different fluid modelling approaches as well as two independently developed particle-in-cell/Monte Carlo collision (PIC/MCC) codes. The focus is on the analysis of the range of applicability of a recently proposed fluid model including an improved…
▽ More
Comparative studies of capacitively coupled radio-frequency discharges in helium and argon at pressures between 10 and 80 Pa are presented applying two different fluid modelling approaches as well as two independently developed particle-in-cell/Monte Carlo collision (PIC/MCC) codes. The focus is on the analysis of the range of applicability of a recently proposed fluid model including an improved drift-diffusion approximation for the electron component as well as its comparison with fluid modelling results using the classical drift-diffusion approximation and benchmark results obtained by PIC/MCC simulations. Main features of this time- and space-dependent fluid model are given. It is found that the novel approach shows generally quite good agreement with the macroscopic properties derived by the kinetic simulations and is largely able to characterize qualitatively and quantitatively the discharge behaviour even at conditions when the classical fluid modelling approach fails. Furthermore, the excellent agreement between the two PIC/MCC simulation codes using the velocity Verlet method for the integration of the equations of motion verifies their accuracy and applicability.
△ Less
Submitted 31 January, 2017; v1 submitted 16 August, 2016;
originally announced August 2016.
-
"What's (the) Matter?", A Show on Elementary Particle Physics with 28 Demonstration Experiments
Authors:
Herbi K. Dreiner,
Max Becker,
Mikolaj Borzyszkowski,
Maxim Braun,
Alexander Faßbender,
Julia Hampel,
Maike Hansen,
Dustin Hebecker,
Timo Heepenstrick,
Sascha Heinz,
Katharina Hortmanns,
Christian Jost,
Michael Kortmann,
Matthias U. Kruckow,
Till Leuteritz,
Claudia Lütz,
Philip Mahlberg,
Johannes Müllers,
Toby Opferkuch,
Ewald Paul,
Peter Pauli,
Merlin Rossbach,
Steffen Schaepe,
Tobias Schiffer,
Jan F. Schmidt
, et al. (4 additional authors not shown)
Abstract:
We present the screenplay of a physics show on particle physics, by the Physikshow of Bonn University. The show is addressed at non-physicists aged 14+ and communicates basic concepts of elementary particle physics including the discovery of the Higgs boson in an entertaining fashion. It is also demonstrates a successful outreach activity heavily relying on the university physics students. This pa…
▽ More
We present the screenplay of a physics show on particle physics, by the Physikshow of Bonn University. The show is addressed at non-physicists aged 14+ and communicates basic concepts of elementary particle physics including the discovery of the Higgs boson in an entertaining fashion. It is also demonstrates a successful outreach activity heavily relying on the university physics students. This paper is addressed at anybody interested in particle physics and/or show physics. This paper is also addressed at fellow physicists working in outreach, maybe the experiments and our choice of simple explanations will be helpful. Furthermore, we are very interested in related activities elsewhere, in particular also demonstration experiments relevant to particle physics, as often little of this work is published.
Our show involves 28 live demonstration experiments. These are presented in an extensive appendix, including photos and technical details. The show is set up as a quest, where 2 students from Bonn with the aid of a caretaker travel back in time to understand the fundamental nature of matter. They visit Rutherford and Geiger in Manchester around 1911, who recount their famous experiment on the nucleus and show how particle detectors work. They travel forward in time to meet Lawrence at Berkeley around 1950, teaching them about the how and why of accelerators. Next, they visit Wu at DESY, Hamburg, around 1980, who explains the strong force. They end up in the LHC tunnel at CERN, Geneva, Switzerland in 2012. Two experimentalists tell them about colliders and our heroes watch live as the Higgs boson is produced and decays. The show was presented in English at Oxford University and University College London, as well as Padua University and ICTP Trieste. It was 1st performed in German at the Deutsche Museum, Bonn (5/'14). The show has eleven speaking parts and involves in total 20 people.
△ Less
Submitted 17 August, 2016; v1 submitted 25 July, 2016;
originally announced July 2016.
-
Participatory Patterns in an International Air Quality Monitoring Initiative
Authors:
Alina Sîrbu,
Martin Becker,
Saverio Caminiti,
Bernard De Baets,
Bart Elen,
Louise Francis,
Pietro Gravino,
Andreas Hotho,
Stefano Ingarra,
Vittorio Loreto,
Andrea Molino,
Juergen Mueller,
Jan Peters,
Ferdinando Ricchiuti,
Fabio Saracino,
Vito D. P. Servedio,
Gerd Stumme,
Jan Theunis,
Francesca Tria,
Joris Van den Bossche
Abstract:
The issue of sustainability is at the top of the political and societal agenda, being considered of extreme importance and urgency. Human individual action impacts the environment both locally (e.g., local air/water quality, noise disturbance) and globally (e.g., climate change, resource use). Urban environments represent a crucial example, with an increasing realization that the most effective wa…
▽ More
The issue of sustainability is at the top of the political and societal agenda, being considered of extreme importance and urgency. Human individual action impacts the environment both locally (e.g., local air/water quality, noise disturbance) and globally (e.g., climate change, resource use). Urban environments represent a crucial example, with an increasing realization that the most effective way of producing a change is involving the citizens themselves in monitoring campaigns (a citizen science bottom-up approach). This is possible by develo** novel technologies and IT infrastructures enabling large citizen participation. Here, in the wider framework of one of the first such projects, we show results from an international competition where citizens were involved in mobile air pollution monitoring using low cost sensing devices, combined with a web-based game to monitor perceived levels of pollution. Measures of shift in perceptions over the course of the campaign are provided, together with insights into participatory patterns emerging from this study. Interesting effects related to inertia and to direct involvement in measurement activities rather than indirect information exposure are also highlighted, indicating that direct involvement can enhance learning and environmental awareness. In the future, this could result in better adoption of policies towards decreasing pollution.
△ Less
Submitted 26 March, 2015;
originally announced March 2015.
-
A survey on Human Mobility and its applications
Authors:
Fereshteh Asgari,
Vincent Gauthier,
Monique Becker
Abstract:
Human Mobility has attracted attentions from different fields of studies such as epidemic modeling, traffic engineering, traffic prediction and urban planning. In this survey we review major characteristics of human mobility studies including from trajectory-based studies to studies using graph and network theory. In trajectory-based studies statistical measures such as jump length distribution an…
▽ More
Human Mobility has attracted attentions from different fields of studies such as epidemic modeling, traffic engineering, traffic prediction and urban planning. In this survey we review major characteristics of human mobility studies including from trajectory-based studies to studies using graph and network theory. In trajectory-based studies statistical measures such as jump length distribution and radius of gyration are analyzed in order to investigate how people move in their daily life, and if it is possible to model this individual movements and make prediction based on them. Using graph in mobility studies, helps to investigate the dynamic behavior of the system, such as diffusion and flow in the network and makes it easier to estimate how much one part of the network influences another by using metrics like centrality measures. We aim to study population flow in transportation networks using mobility data to derive models and patterns, and to develop new applications in predicting phenomena such as congestion. Human Mobility studies with the new generation of mobility data provided by cellular phone networks, arise new challenges such as data storing, data representation, data analysis and computation complexity. A comparative review of different data types used in current tools and applications of Human Mobility studies leads us to new approaches for dealing with mentioned challenges.
△ Less
Submitted 2 July, 2013;
originally announced July 2013.
-
Measurement of the Ultrafast Temporal Response of a Plasmonic Antenna
Authors:
Maria Becker,
Wayne Cheng-Wei Huang,
Herman Batelaan,
Elizabeth Smythe,
Federico Capasso
Abstract:
We report a measurement on the temporal response of a plasmonic antenna at the femtosecond time scale. The antenna consists of a square array of nanometer-size gold rods. We find that the far-field dispersion of light reflected from the plasmonic antenna is less than that of a 1.2 mm thick glass slide. Assuming a simple oscillating dipole model this implies that the near-field of the antenna may b…
▽ More
We report a measurement on the temporal response of a plasmonic antenna at the femtosecond time scale. The antenna consists of a square array of nanometer-size gold rods. We find that the far-field dispersion of light reflected from the plasmonic antenna is less than that of a 1.2 mm thick glass slide. Assuming a simple oscillating dipole model this implies that the near-field of the antenna may be used as an electron switch that responds faster than 20 fs. Alternatively, ultrafast electron diffraction may be used to investigate the near-field dynamics of the plasmonic antenna.
△ Less
Submitted 30 July, 2012;
originally announced July 2012.
-
Technical Design Report for the: PANDA Micro Vertex Detector
Authors:
PANDA Collaboration,
W. Erni,
I. Keshelashvili,
B. Krusche,
M. Steinacher,
Y. Heng,
Z. Liu,
H. Liu,
X. Shen,
Q. Wang,
H. Xu,
M. Albrecht,
J. Becker,
K. Eickel,
F. Feldbauer,
M. Fink,
P. Friedel,
F. H. Heinsius,
T. Held,
H. Koch,
B. Kopf,
M. Leyhe,
C. Motzko,
M. Pelizäus,
J. Pychy
, et al. (436 additional authors not shown)
Abstract:
This document illustrates the technical layout and the expected performance of the Micro Vertex Detector (MVD) of the PANDA experiment. The MVD will detect charged particles as close as possible to the interaction zone. Design criteria and the optimisation process as well as the technical solutions chosen are discussed and the results of this process are subjected to extensive Monte Carlo physics…
▽ More
This document illustrates the technical layout and the expected performance of the Micro Vertex Detector (MVD) of the PANDA experiment. The MVD will detect charged particles as close as possible to the interaction zone. Design criteria and the optimisation process as well as the technical solutions chosen are discussed and the results of this process are subjected to extensive Monte Carlo physics studies. The route towards realisation of the detector is outlined.
△ Less
Submitted 10 August, 2012; v1 submitted 27 July, 2012;
originally announced July 2012.
-
Nanofiber Fabry-Perot microresonator for non-linear optics and cavity quantum electrodynamics
Authors:
C. Wuttke,
M. Becker,
S. Brückner,
M. Rothhardt,
A. Rauschenbeutel
Abstract:
We experimentally realize a Fabry-Perot-type optical microresonator near the cesium D2 line wavelength based on a tapered optical fiber, equipped with two fiber Bragg gratings which enclose a sub-wavelength diameter waist. Owing to the very low taper losses, the finesse of the resonator reaches F = 86 while the on-resonance transmission is T = 11 %. The characteristics of our resonator fulfill the…
▽ More
We experimentally realize a Fabry-Perot-type optical microresonator near the cesium D2 line wavelength based on a tapered optical fiber, equipped with two fiber Bragg gratings which enclose a sub-wavelength diameter waist. Owing to the very low taper losses, the finesse of the resonator reaches F = 86 while the on-resonance transmission is T = 11 %. The characteristics of our resonator fulfill the requirements of non-linear optics and cavity quantum electrodynamics in the strong coupling regime. In combination with its demonstrated ease of use and its advantageous mode geometry, it thus opens a realm of applications.
△ Less
Submitted 4 September, 2012; v1 submitted 8 February, 2012;
originally announced February 2012.