-
The Neural Network First-Level Hardware Track Trigger of the Belle II Experiment
Authors:
S. Bähr,
H. Bae,
J. Becker,
M. Bertemes,
M. Campajola,
T. Ferber,
G. Inguglia,
Y. Iwasaki,
T. Jülg,
C. Kiesling,
Y. -T. Lai,
Y. Liu,
A. Knoll,
T. Koga,
A. Lenz,
F. Meggendorfer,
H. Nakazawa,
M. Neu,
J. Schieck,
E. Schmidt,
J. -G. Shiu,
S. Skambraks,
K. Unger,
J. Yin
Abstract:
We describe the principles and performance of the first-level ("L1") hardware track trigger of Belle II, based on neural networks. The networks use as input the results from the standard Belle II trigger, which provides "2D" track candidates in the plane transverse to the electron-positron beams. The networks then provide estimates for the origin of the 2D track candidates in direction of the coll…
▽ More
We describe the principles and performance of the first-level ("L1") hardware track trigger of Belle II, based on neural networks. The networks use as input the results from the standard Belle II trigger, which provides "2D" track candidates in the plane transverse to the electron-positron beams. The networks then provide estimates for the origin of the 2D track candidates in direction of the colliding beams ("$z$-vertex"), as well as their polar emission angles $θ$. Given the $z$-vertices of the "neural" tracks allows identifying events coming from the collision region ($z \approx 0$), and suppressing the overwhelming background from outside by a suitable cut $d$. Requiring $|z| < d$ for at least one neural track in an event with two or more 2D candidates will set an L1 trigger. The networks also enable a minimum bias trigger, requiring a single 2D track candidate validated by a neural track with a momentum larger than 0.7 GeV in addition to the $|z|$ condition. The momentum of the neural track is derived with the help of the polar angle $θ$.
△ Less
Submitted 12 June, 2024; v1 submitted 22 February, 2024;
originally announced February 2024.
-
Implicit and Explicit Solvent Models for the Solubility of 1,4-Diethynylbenzene and Terephthalonitrile in Ionic Liquids
Authors:
Clare Xie Yijia,
Julian Becker,
Tom Welton,
Patricia Hunt
Abstract:
The interactions of ionic liquids (ILs) with organic solutes are of interest to many applications involving the use of ILs as task-specific solvents, such as in sensing devices or catalysis. However, currently little is known about these specific interactions. The interactions of two structurally-similar organic analytes with different functional groups (alkyne and cyanide) in the IL [C2C1Im][MeSO…
▽ More
The interactions of ionic liquids (ILs) with organic solutes are of interest to many applications involving the use of ILs as task-specific solvents, such as in sensing devices or catalysis. However, currently little is known about these specific interactions. The interactions of two structurally-similar organic analytes with different functional groups (alkyne and cyanide) in the IL [C2C1Im][MeSO4] are studied via density functional theory. By analysing the type and strength of the interactions between the organic solutes and ionic liquid using explicit solvation, the study aims to better understand of the possible noncovalent interactions between them. Implicit solvation models were also adopted to obtain solvation energies from solvent continuum. The understanding of IL-solute interactions and solubilities are critical in many applications such as improving the analytical performance of ILs-based sensors.
△ Less
Submitted 2 November, 2023;
originally announced November 2023.
-
Spin-charge correlations in finite one-dimensional multi-band Fermi systems
Authors:
J. M. Becker,
G. M. Koutentakis,
P. Schmelcher
Abstract:
We investigate spin-charge separation of a spin-1/2 Fermi system confined in a triple well where multiple bands are occupied. We assume that our finite fermionic system is close to fully spin polarized while being doped by a hole and an impurity fermion with opposite spin. Our setup involves ferromagnetic couplings among the particles in different bands, leading to the development of strong spin-t…
▽ More
We investigate spin-charge separation of a spin-1/2 Fermi system confined in a triple well where multiple bands are occupied. We assume that our finite fermionic system is close to fully spin polarized while being doped by a hole and an impurity fermion with opposite spin. Our setup involves ferromagnetic couplings among the particles in different bands, leading to the development of strong spin-transport correlations in an intermediate interaction regime. Interactions are then strong enough to lift the degeneracy among singlet and triplet spin configurations in the well of the spin impurity but not strong enough to prohibit hole-induced magnetic excitations to the singlet state. Despite the strong spin-hole correlations, the system exhibits spin-charge deconfinement allowing for long-range entanglement of the spatial and spin degrees of freedom.
△ Less
Submitted 14 November, 2023; v1 submitted 16 May, 2023;
originally announced May 2023.
-
Transition metal ion ensembles in crystals as solid-state coherent spin-photon interfaces: The case of nickel in magnesium oxide
Authors:
E. Poem,
S. Gupta,
I. Morris,
K. Klink,
L. Singh,
T. Zhong,
J. N. Becker,
O. Firstenberg
Abstract:
We present general guidelines for finding solid-state systems that could serve as coherent electron spin-photon interfaces even at relatively high temperatures, where phonons are abundant but cooling is easier, and show that transition metal ions in various crystals could comply with these guidelines. As an illustrative example, we focus on divalent nickel ions in magnesium oxide. We perform elect…
▽ More
We present general guidelines for finding solid-state systems that could serve as coherent electron spin-photon interfaces even at relatively high temperatures, where phonons are abundant but cooling is easier, and show that transition metal ions in various crystals could comply with these guidelines. As an illustrative example, we focus on divalent nickel ions in magnesium oxide. We perform electron spin resonance spectroscopy and polarization-sensitive magneto-optical fluorescence spectroscopy of a dense ensemble of these ions and find that (i) the ground-state electron spin stays coherent at liquid-helium temperatures for several microseconds, and (ii) there exists energetically well-isolated excited states which can couple to two ground state spin sub-levels via optical transitions of orthogonal polarizations. The latter implies that fast, coherent optical control over the electron spin is possible. We then propose schemes for optical initialization and control of the ground-state electron spin using polarized optical pulses, as well as two schemes for implementing a noise-free, broadband quantum-optical memory at near-telecom wavelengths in this material system.
△ Less
Submitted 22 August, 2023; v1 submitted 30 December, 2022;
originally announced December 2022.
-
Applications and Techniques for Fast Machine Learning in Science
Authors:
Allison McCarn Deiana,
Nhan Tran,
Joshua Agar,
Michaela Blott,
Giuseppe Di Guglielmo,
Javier Duarte,
Philip Harris,
Scott Hauck,
Mia Liu,
Mark S. Neubauer,
Jennifer Ngadiuba,
Seda Ogrenci-Memik,
Maurizio Pierini,
Thea Aarrestad,
Steffen Bahr,
Jurgen Becker,
Anne-Sophie Berthold,
Richard J. Bonventre,
Tomas E. Muller Bravo,
Markus Diefenthaler,
Zhen Dong,
Nick Fritzsche,
Amir Gholami,
Ekaterina Govorkova,
Kyle J Hazelwood
, et al. (62 additional authors not shown)
Abstract:
In this community review report, we discuss applications and techniques for fast machine learning (ML) in science -- the concept of integrating power ML methods into the real-time experimental data processing loop to accelerate scientific discovery. The material for the report builds on two workshops held by the Fast ML for Science community and covers three main areas: applications for fast ML ac…
▽ More
In this community review report, we discuss applications and techniques for fast machine learning (ML) in science -- the concept of integrating power ML methods into the real-time experimental data processing loop to accelerate scientific discovery. The material for the report builds on two workshops held by the Fast ML for Science community and covers three main areas: applications for fast ML across a number of scientific domains; techniques for training and implementing performant and resource-efficient ML algorithms; and computing architectures, platforms, and technologies for deploying these algorithms. We also present overlap** challenges across the multiple scientific domains where common solutions can be found. This community report is intended to give plenty of examples and inspiration for scientific discovery through integrated and accelerated ML solutions. This is followed by a high-level overview and organization of technical advances, including an abundance of pointers to source material, which can enable these breakthroughs.
△ Less
Submitted 25 October, 2021;
originally announced October 2021.
-
Prototype Design of a Timing and Fast Control system in the CBM Experiment
Authors:
V. Sidorenko,
I. Fröhlich,
W. F. J. Müller,
D. Emschermann,
S. Bähr,
C. Sturm,
J. Becker
Abstract:
The Compressed Baryonic Matter (CBM) experiment is designed to handle interaction rates of up to 10 MHz and up to 1 TB/s of raw data generated. With triggerless streaming data acquisition in the experiment and beam intensity fluctuations, it is expected that occasional data bursts will surpass bandwidth capabilities of the Data Acquisition System (DAQ) system. In order to preserve integrity of eve…
▽ More
The Compressed Baryonic Matter (CBM) experiment is designed to handle interaction rates of up to 10 MHz and up to 1 TB/s of raw data generated. With triggerless streaming data acquisition in the experiment and beam intensity fluctuations, it is expected that occasional data bursts will surpass bandwidth capabilities of the Data Acquisition System (DAQ) system. In order to preserve integrity of event data, the bandwidth of DAQ must be throttled in an organised way with minimum information loss. The Timing and Fast Control (TFC) system provides a latency-optimised datapath for throttling commands and distributes a system clock together with a global timestamp. This paper describes a prototype design of the system with focus on synchronisation and its evaluation.
△ Less
Submitted 20 December, 2021; v1 submitted 25 October, 2021;
originally announced October 2021.
-
Gigahertz-Bandwidth Optical Memory in Pr$^{3+}$:Y$_2$SiO$_5$
Authors:
M. Nicolle,
J. N. Becker,
C. Weinzetl,
I. A. Walmsley,
P. M. Ledingham
Abstract:
We experimentally study a broadband implementation of the atomic frequency comb (AFC) rephasing protocol with a cryogenically cooled Pr$^{3+}$:Y$_2$SiO$_5$ crystal. To allow for storage of broadband pulses, we explore a novel regime where the input photonic bandwidth closely matches the inhomogeneous broadening of the material $(\sim5\,\textrm{GHz})$, thereby significantly exceeding the hyperfine…
▽ More
We experimentally study a broadband implementation of the atomic frequency comb (AFC) rephasing protocol with a cryogenically cooled Pr$^{3+}$:Y$_2$SiO$_5$ crystal. To allow for storage of broadband pulses, we explore a novel regime where the input photonic bandwidth closely matches the inhomogeneous broadening of the material $(\sim5\,\textrm{GHz})$, thereby significantly exceeding the hyperfine ground and excited state splitting $(\sim10\,\textrm{MHz})$. Through an investigation of different AFC preparation parameters, we measure a maximum efficiency of $10\%$ after a rephasing time of $12.5\,$ns. With a suboptimal AFC, we witness up to 12 rephased temporal modes.
△ Less
Submitted 25 February, 2021;
originally announced February 2021.
-
Network Structure and Collective Intelligence in the Diffusion of Innovation
Authors:
Joshua Becker
Abstract:
When multiple innovations compete for adoption, historical chance leading to early advantage can generate lock-in effects that allow suboptimal innovations to succeed at the expense of superior alternatives. Research on the diffusion of innovafacetion has identified many possible sources of early advantage, but these mechanisms can benefit both optimal and suboptimal innovations. This paper moves…
▽ More
When multiple innovations compete for adoption, historical chance leading to early advantage can generate lock-in effects that allow suboptimal innovations to succeed at the expense of superior alternatives. Research on the diffusion of innovafacetion has identified many possible sources of early advantage, but these mechanisms can benefit both optimal and suboptimal innovations. This paper moves beyond chance-as-explanation to identify structural principles that systematically impact the likelihood that the optimal strategy will spread. A formal model of innovation diffusion shows that the network structure of organizational relationships can systematically impact the likelihood that widely adopted innovations will be payoff optimal. Building on prior diffusion research, this paper focuses on the role of central actors i.e. well-connected people or firms. While contagion models of diffusion highlight the benefits of central actors for spreading innovations further and faster, the present analysis reveals a dark side to this influence: the mere presence of central actors in a network increases rates of adoption but also increases the likelihood of suboptimal outcomes. This effect, however, does not represent a speed-optimality tradeoff, as dense networks are both fast and optimal. This finding is consistent with related research showing that network centralization undermines collective intelligence.
△ Less
Submitted 30 January, 2023; v1 submitted 26 March, 2020;
originally announced March 2020.
-
T2-weighted Spine Imaging using a Single-Shot Turbo Spin Echo Pulse Sequence
Authors:
Mahesh Bharath Keerthivasan,
Blair Winegar,
Jennifer L Becker,
Manojkumar Saranathan
Abstract:
T2 weighted imaging of the spine is commonly performed using fast spin echo (FSE/TSE) based sequences, resulting in long scan times and vulnerability to motion artifacts. While single shot fast spin echo sequences have been attempted, their adoption has been limited by poor spatial resolution and specific absorption rate (SAR) limitations. We investigate the use of a half-Fourier acquisition singl…
▽ More
T2 weighted imaging of the spine is commonly performed using fast spin echo (FSE/TSE) based sequences, resulting in long scan times and vulnerability to motion artifacts. While single shot fast spin echo sequences have been attempted, their adoption has been limited by poor spatial resolution and specific absorption rate (SAR) limitations. We investigate the use of a half-Fourier acquisition single-shot turbo spin-echo variable flip angle (HASTE-VFA) sequence for T2 weighted spine imaging. A variable refocusing flip angle echo train was first optimized for the spine to improve the point spread function (PSF) and minimize SAR, yielding images with improved spatial resolution and signal-to-noise ratio compared to the constant flip angle sequence. Data was acquired from 29 patients (20 lumbar and thoracolumbar, 9 whole-spine) using conventional fast spin echo and the proposed variable flip angle single-shot sequences. All images were graded by two experienced neuroradiologists in a blinded fashion and scores were assigned based on blurring, motion, artifacts, and noise as well as appearance of disks, facet joints, end plates, nerve roots and the spinal cord.
△ Less
Submitted 8 November, 2019;
originally announced November 2019.
-
A highly integrated, stand-alone photoelectrochemical device for large-scale solar hydrogen production
Authors:
Minoh Lee,
Bugra Turan,
Jan-Philipp Becker,
Katharina Welter,
Benjamin Klingebiel,
Elmar Neumann,
Yoo Jung Sohn,
Tsvetelina Merdzhanova,
Thomas Kirchartz,
Friedhelm Finger,
Uwe Rau,
Stefan Haas
Abstract:
Although photoelectrochemical water splitting is likely to be an important and powerful tool to provide environmentally friendly hydrogen, most developments in this field have been conducted on a laboratory scale so far. In order for the technology to make a sizeable impact on the energy transition, scaled up devices made of inexpensive and earth abundant materials must be developed. In this work,…
▽ More
Although photoelectrochemical water splitting is likely to be an important and powerful tool to provide environmentally friendly hydrogen, most developments in this field have been conducted on a laboratory scale so far. In order for the technology to make a sizeable impact on the energy transition, scaled up devices made of inexpensive and earth abundant materials must be developed. In this work, we demonstrate a scalable (64 cm2 aperture area) artificial photoelectrochemical device composed of triple-junction thin-film silicon solar cells in conjunction with an electrodeposited bifunctional nickel iron molybdenum water splitting catalyst. Our device shows a solar to hydrogen efficiency of up to 4.67% (5.33% active area) without bias assistance and wire connection. Furthermore, gas separation was enabled by incorporating a membrane in a 3D printed device frame.
△ Less
Submitted 30 October, 2019;
originally announced October 2019.
-
Low Latency Neural Networks using Heterogenous Resources on FPGA for the Belle II Trigger
Authors:
Steffen Baehr,
Sara McCarney,
Felix Meggendorfer,
Julian Poehler,
Sebastian Skambraks,
Kai Unger,
Juergen Becker,
Christian Kiesling
Abstract:
One of the major components of the Belle II trigger system is the neural network trigger. Its task is to estimate the z-Vertex particle tracks observed in the experiments drift chamber. The trigger is implemented on FPGAs to ensure exibility during operation and leverage their IO capabilities. Meanwhile the implementation has to estimate the vertex in a few hundred nanoseconds to fulfil the requir…
▽ More
One of the major components of the Belle II trigger system is the neural network trigger. Its task is to estimate the z-Vertex particle tracks observed in the experiments drift chamber. The trigger is implemented on FPGAs to ensure exibility during operation and leverage their IO capabilities. Meanwhile the implementation has to estimate the vertex in a few hundred nanoseconds to fulfil the requirements of the experiment. A first version of that trigger was operational during the first collisions. While it was able to estimate the vertex, it had some drawbacks regarding the possible throughput and timing closure. These are the focus of this work, which modifies the original design to allow two networks running in parallel and less routing congestion. We conducted a rescheduling of multiply and accumulate which are the basic operations in such networks. While the original design tried to parallelize as much as possible, the rescheduling tries to reduce the number of parallel data transmission by reusing processing modules. This way resource consumption was reduced by 40% for DSPs. To further increase the throughput by operating an additional network in parallel, we investigated the balanced use of SRAM-LUTs and DSPs for multiply and accumulate operations. With the found balancing ratio the trigger is able to operate two neural networks in parallel on the targeted FPGA within the required latency.
△ Less
Submitted 30 October, 2019;
originally announced October 2019.
-
Megapixels @ Megahertz -- The AGIPD High-Speed Cameras for the European XFEL
Authors:
Ulrich Trunk,
Aschkan Allahgholi,
Julian Becker,
Annette Delfs,
Roberto Dinapoli,
Peter Göttlicher,
Heinz Graafsma,
Dominic Greiffenberg,
Helmut Hirsemann,
Stefanie Jack,
Alexander Klyuev,
Hans Krüger,
Manuela Kuhn,
Torsten Laurus,
Alessandro Marras,
Davide Mezza,
Aldo Mozzanica,
Jennifer Poehlsen,
Ofir Shefer Shalev,
Igor Sheviakov,
Bernd Schmitt,
Jörn Schwandt,
Xintian Shi,
Sergej Smoljanin,
Jiaguo Zhang
, et al. (1 additional authors not shown)
Abstract:
The European XFEL is an extremely brilliant Free Electron Laser Source with a very demanding pulse structure: trains of 2700 X-Ray pulses are repeated at 10 Hz. The pulses inside the train are spaced by 220 ns and each one contains up to $10^{12}$ photons of 12.4 keV, while being $\le 100$ fs in length. AGIPD, the Adaptive Gain Integrating Pixel Detector, is a hybrid pixel detector developed by DE…
▽ More
The European XFEL is an extremely brilliant Free Electron Laser Source with a very demanding pulse structure: trains of 2700 X-Ray pulses are repeated at 10 Hz. The pulses inside the train are spaced by 220 ns and each one contains up to $10^{12}$ photons of 12.4 keV, while being $\le 100$ fs in length. AGIPD, the Adaptive Gain Integrating Pixel Detector, is a hybrid pixel detector developed by DESY, PSI, and the Universities of Bonn and Hamburg to cope with these properties. It is a fast, low noise integrating detector, with single photon sensitivity (for $\text{E}_γ \ge 6$ keV) and a large dynamic range, up to $10^4$ photons at 12.4 keV. This is achieved with a charge sensitive amplifier with 3 adaptively selected gains per pixel. 352 images can be recorded at up to 6.5 MHz and stored in the in-pixel analogue memory and read out between pulse trains. The core component of this detector is the AGIPD ASIC, which consists of $64 \times 64$ pixels of $200 μ\text{m} \times 200 μ\text{m}$. Control of the ASIC's image acquisition and analogue readout is via a command based interface. FPGA based electronic boards, controlling ASIC operation, image digitisation and 10 GE data transmission interface AGIPD detectors to DAQ and control systems. An AGIPD 1 Mpixel detector has been installed at the SPB experimental station in August 2017, while a second one is currently commissioned for the MID endstation. A larger (4 Mpixel) AGIPD detector and one to employ Hi-Z sensor material to efficiently register photons up to $\text{E}_γ \approx 25$ keV are currently under construction.
△ Less
Submitted 6 August, 2019;
originally announced August 2019.
-
UAFS: Uncertainty-Aware Feature Selection for Problems with Missing Data
Authors:
Andrew J. Becker,
James P. Bagrow
Abstract:
Missing data are a concern in many real world data sets and imputation methods are often needed to estimate the values of missing data, but data sets with excessive missingness and high dimensionality challenge most approaches to imputation. Here we show that appropriate feature selection can be an effective preprocessing step for imputation, allowing for more accurate imputation and subsequent mo…
▽ More
Missing data are a concern in many real world data sets and imputation methods are often needed to estimate the values of missing data, but data sets with excessive missingness and high dimensionality challenge most approaches to imputation. Here we show that appropriate feature selection can be an effective preprocessing step for imputation, allowing for more accurate imputation and subsequent model predictions. The key feature of this preprocessing is that it incorporates uncertainty: by accounting for uncertainty due to missingness when selecting features we can reduce the degree of missingness while also limiting the number of uninformative features being used to make predictive models. We introduce a method to perform uncertainty-aware feature selection (UAFS), provide a theoretical motivation, and test UAFS on both real and synthetic problems, demonstrating that across a variety of data sets and levels of missingness we can improve the accuracy of imputations. Improved imputation due to UAFS also results in improved prediction accuracy when performing supervised learning using these imputed data sets. Our UAFS method is general and can be fruitfully coupled with a variety of imputation methods.
△ Less
Submitted 20 April, 2021; v1 submitted 2 April, 2019;
originally announced April 2019.
-
Better than a lens -- Increasing the signal-to-noise ratio through pupil splitting
Authors:
Jan Becker,
Takahiro Deguchi,
Alexander Jügler,
Ronny Förster,
Uwe Hübner,
Jonas Ries,
Rainer Heintzmann
Abstract:
Lenses are designed to fulfill Fermats principle such that all light interferes constructively in its focus, guaranteeing its maximum concentration. It can be shown that imaging via an unmodified full pupil yields the maximum transfer strength for all spatial frequencies transferable by the system. Seemingly also the signal-to-noise ratio (SNR) is optimal. The achievable SNR at a given photon budg…
▽ More
Lenses are designed to fulfill Fermats principle such that all light interferes constructively in its focus, guaranteeing its maximum concentration. It can be shown that imaging via an unmodified full pupil yields the maximum transfer strength for all spatial frequencies transferable by the system. Seemingly also the signal-to-noise ratio (SNR) is optimal. The achievable SNR at a given photon budget is critical especially if that budget is strictly limited as in the case of fluorescence microscopy. In this work we propose a general method which achieves a better SNR for high spatial frequency information of an optical imaging system, without the need to capture more photons. This is achieved by splitting the pupil of an incoherent imaging system such that two (or more) sub-images are simultaneously acquired and computationally recombined. We compare the theoretical performance of split pupil imaging to the non-split scenario and implement the splitting using a tilted elliptical mirror placed at the back-focal-plane (BFP) of a fluorescence widefield microscope.
△ Less
Submitted 5 September, 2022; v1 submitted 20 November, 2018;
originally announced November 2018.
-
The Adaptive Gain Integrating Pixel Detector at the European XFEL
Authors:
Aschkan Allahgholi,
Julian Becker,
Annette Delfs,
Roberto Dinapoli,
Peter Goettlicher,
Dominic Greiffenberg,
Beat Henrich,
Helmut Hirsemann,
Manuela Kuhn,
Robert Klanner,
Alexander Klyuev,
Hans Krueger,
Sabine Lange,
Torsten Laurus,
Alessandro Marras,
Davide Mezza,
Aldo Mozzanica,
Magdalena Niemann,
Jennifer Poehlsen,
Joern Schwandt,
Igor Sheviakov,
Xintian Shi,
Sergej Smoljanin,
Lothar Steffen,
Jolanta Sztuk-Dambietz
, et al. (7 additional authors not shown)
Abstract:
The Adaptive Gain Integrating Pixel Detector (AGIPD) is an x-ray imager, custom designed for the European x-ray Free-Electron Laser (XFEL). It is a fast, low noise integrating detector, with an adaptive gain amplifier per pixel. This has an equivalent noise of less than 1 keV when detecting single photons and, when switched into another gain state, a dynamic range of more than 10$^4$ photons of 12…
▽ More
The Adaptive Gain Integrating Pixel Detector (AGIPD) is an x-ray imager, custom designed for the European x-ray Free-Electron Laser (XFEL). It is a fast, low noise integrating detector, with an adaptive gain amplifier per pixel. This has an equivalent noise of less than 1 keV when detecting single photons and, when switched into another gain state, a dynamic range of more than 10$^4$ photons of 12 keV. In burst mode the system is able to store 352 images while running at up to 6.5 MHz, which is compatible with the 4.5 MHz frame rate at the European XFEL. The AGIPD system was installed and commissioned in August 2017, and successfully used for the first experiments at the Single Particles, Clusters and Biomolecules (SPB) experimental station at the European XFEL since September 2017. This paper describes the principal components and performance parameters of the system.
△ Less
Submitted 2 October, 2018; v1 submitted 1 August, 2018;
originally announced August 2018.
-
Experimental demonstration of quantum effects in the operation of microscopic heat engines
Authors:
James Klatzow,
Jonas N. Becker,
Patrick M. Ledingham,
Christian Weinzetl,
Krzysztof T. Kaczmarek,
Dylan J. Saunders,
Joshua Nunn,
Ian A. Walmsley,
Raam Uzdin,
Eilon Poem
Abstract:
The heat engine, a machine that extracts useful work from thermal sources, is one of the basic theoretical constructs and fundamental applications of classical thermodynamics. The classical description of a heat engine does not include coherence in its microscopic degrees of freedom. By contrast, a quantum heat engine might possess coherence between its internal states. Although the Carnot efficie…
▽ More
The heat engine, a machine that extracts useful work from thermal sources, is one of the basic theoretical constructs and fundamental applications of classical thermodynamics. The classical description of a heat engine does not include coherence in its microscopic degrees of freedom. By contrast, a quantum heat engine might possess coherence between its internal states. Although the Carnot efficiency cannot be surpassed, and coherence can be performance degrading in certain conditions, it was recently predicted that even when using only thermal resources, internal coherence can enable a quantum heat engine to produce more power than any classical heat engine using the same resources. Such a power boost therefore constitutes a quantum thermodynamic signature. It has also been shown that the presence of coherence results in the thermodynamic equivalence of different quantum heat engine types, an effect with no classical counterpart. Microscopic heat machines have been recently implemented with trapped ions, and proposals for heat machines using superconducting circuits and optomechanics have been made. When operated with standard thermal baths, however, the machines implemented so far have not demonstrated any inherently quantum feature in their thermodynamic quantities. Here we implement two types of quantum heat engines by use of an ensemble of nitrogen-vacancy centres in diamond, and experimentally demonstrate both the coherence power boost and the equivalence of different heat-engine types. This constitutes the first observation of quantum thermodynamic signatures in heat machines.
△ Less
Submitted 5 January, 2018; v1 submitted 24 October, 2017;
originally announced October 2017.
-
Complex Contagions: A Decade in Review
Authors:
Douglas Guilbeault,
Joshua Becker,
Damon Centola
Abstract:
Since the publication of 'Complex Contagions and the Weakness of Long Ties' in 2007, complex contagions have been studied across an enormous variety of social domains. In reviewing this decade of research, we discuss recent advancements in applied studies of complex contagions, particularly in the domains of health, innovation diffusion, social media, and politics. We also discuss how these empiri…
▽ More
Since the publication of 'Complex Contagions and the Weakness of Long Ties' in 2007, complex contagions have been studied across an enormous variety of social domains. In reviewing this decade of research, we discuss recent advancements in applied studies of complex contagions, particularly in the domains of health, innovation diffusion, social media, and politics. We also discuss how these empirical studies have spurred complementary advancements in the theoretical modeling of contagions, which concern the effects of network topology on diffusion, as well as the effects of individual-level attributes and thresholds. In synthesizing these developments, we suggest three main directions for future research. The first concerns the study of how multiple contagions interact within the same network and across networks, in what may be called an ecology of contagions. The second concerns the study of how the structure of thresholds and their behavioral consequences can vary by individual and social context. The third area concerns the roles of diversity and homophily in the dynamics of complex contagion, including both diversity of demographic profiles among local peers, and the broader notion of structural diversity within a network. Throughout this discussion, we make an effort to highlight the theoretical and empirical opportunities that lie ahead.
△ Less
Submitted 20 October, 2017;
originally announced October 2017.
-
Correlative Microscopy of Morphology and Luminescence of Cu porphyrin aggregates
Authors:
M. Bahrami,
S. Kraft,
J. Becker,
H. Hartmann,
B. Vogler,
K. Wardelmann,
H. Behle,
J. A. A. W. Elemans,
I. Barke,
S. Speller
Abstract:
Transfer of energy and information through molecule aggregates requires as one important building block anisotropic, cable-like structures. Knowledge on the spatial correlation of luminescence and morphology represents a prerequisite in the understanding of internal processes and will be important for architecting suitable landscapes. In this context we study the morphology, fluorescence and phosp…
▽ More
Transfer of energy and information through molecule aggregates requires as one important building block anisotropic, cable-like structures. Knowledge on the spatial correlation of luminescence and morphology represents a prerequisite in the understanding of internal processes and will be important for architecting suitable landscapes. In this context we study the morphology, fluorescence and phosphorescence of molecule aggregate structures on surfaces in a spatially correlative way. We consider as two morphologies, lengthy strands and isotropic islands. It turns out that phosphorescence is quite strong compared to fluorescence and the spatial variation of the observed intensities is largely in line with the amount of dye. However in proportion, the strands exhibit more fluorescence than the isotropic islands suggesting weaker non-radiative channels. The ratio fluorescence to phosphorescence appears to be correlated with the degree of aggregation or internal order. The heights at which luminescence saturates is explained in the context of attenuation and emission multireflection, inside the dye. This is supported by correlative photoemission electron microscopy which is more sensitive to the surface region. The lengthy structures exhibit a pronounced polarization dependence of the luminescence with a relative dichroism up to about 60%, revealing substantial perpendicular orientation preference of the molecules with respect to the substrate and parallel with respect to the strands.
△ Less
Submitted 20 September, 2017;
originally announced September 2017.
-
Characterization of Chromium Compensated GaAs as an x-ray Sensor Material for Charge-Integrating Pixel Array Detectors
Authors:
Julian Becker,
Mark W. Tate,
Katherine S. Shanks,
Hugh T. Philipp,
Joel T. Weiss,
Prafull Purohit,
Darol Chamberlain,
Sol M. Gruner
Abstract:
We studied the properties of chromium compensated GaAs when coupled to charge integrating ASICs as a function of detector temperature, applied bias and x-ray tube energy. The material is a photoresistor and can be biased to collect either electrons or holes by the pixel circuitry. Both are studied here. Previous studies have shown substantial hole trap**. This trap** and other sensor propertie…
▽ More
We studied the properties of chromium compensated GaAs when coupled to charge integrating ASICs as a function of detector temperature, applied bias and x-ray tube energy. The material is a photoresistor and can be biased to collect either electrons or holes by the pixel circuitry. Both are studied here. Previous studies have shown substantial hole trap**. This trap** and other sensor properties give rise to several non-ideal effects which include an extended point spread function, variations in the effective pixel size, and rate dependent offset shifts. The magnitude of these effects varies with temperature and bias, mandating good temperature uniformity in the sensor and very good temperature stabilization, as well as a carefully selected bias voltage.
△ Less
Submitted 21 November, 2017; v1 submitted 7 July, 2017;
originally announced July 2017.
-
Sub-Microsecond X-Ray Imaging Using Hole-Collecting Schottky type CdTe with Charge-Integrating Pixel Array Detectors
Authors:
Julian Becker,
Mark W. Tate,
Katherine S. Shanks,
Hugh T. Philipp,
Joel T. Weiss,
Prafull Purohit,
Darol Chamberlain,
Sol M. Gruner
Abstract:
CdTe is increasingly being used as the x-ray sensing material in imaging pixel array detectors for x-rays, generally above 20 keV, where silicon sensors become unacceptably transparent. Unfortunately CdTe suffers from polarization, which can alter the response of the material over time and with accumulated dose. Most prior studies used long integration times or CdTe that was not of the hole-collec…
▽ More
CdTe is increasingly being used as the x-ray sensing material in imaging pixel array detectors for x-rays, generally above 20 keV, where silicon sensors become unacceptably transparent. Unfortunately CdTe suffers from polarization, which can alter the response of the material over time and with accumulated dose. Most prior studies used long integration times or CdTe that was not of the hole-collecting Schottky type. We investigated the temporal response of hole-collecting Schottky type CdTe sensors on timescales ranging from tens of nanoseconds to several seconds. We found that the material shows signal persistence on the timescale of hundreds of milliseconds attributed to the detrap** of a shallow trap, and additional persistence on sub-microsecond timescales after polarization. The results show that this type of CdTe can be used for time resolved studies down to approximately 100 ns. However quantitative interpretation of the signal requires careful attention to bias voltages, polarization and exposure history.
△ Less
Submitted 15 May, 2017; v1 submitted 6 March, 2017;
originally announced March 2017.
-
High Dynamic Range X-ray Detector Pixel Architectures Utilizing Charge Removal
Authors:
Joel T. Weiss,
Katherine S. Shanks,
Hugh T. Philipp,
Julian Becker,
Darol Chamberlain,
Prafull Purohit,
Mark W. Tate,
Sol M. Gruner
Abstract:
Several charge integrating CMOS pixel front-ends utilizing charge removal techniques have been fabricated to extend dynamic range for x-ray diffraction applications at synchrotron sources and x-ray free electron lasers (XFELs). The pixels described herein build on the Mixed Mode Pixel Array Detector (MM-PAD) framework, developed previously by our group to perform high dynamic range imaging. These…
▽ More
Several charge integrating CMOS pixel front-ends utilizing charge removal techniques have been fabricated to extend dynamic range for x-ray diffraction applications at synchrotron sources and x-ray free electron lasers (XFELs). The pixels described herein build on the Mixed Mode Pixel Array Detector (MM-PAD) framework, developed previously by our group to perform high dynamic range imaging. These new pixels boast several orders of magnitude improvement in maximum flux over the MM-PAD, which is capable of measuring a sustained flux in excess of 10$^{8}$ x-rays/pixel/second while maintaining sensitivity to smaller signals, down to single x-rays. To extend dynamic range, charge is removed from the integration node of the front-end amplifier without interrupting integration. The number of times this process occurs is recorded by a digital counter in the pixel. The parameter limiting full well is thereby shifted from the size of an integration capacitor to the depth of a digital counter. The result is similar to that achieved by counting pixel array detectors, but the integrators presented here are designed to tolerate a sustained flux >10$^{11}$ x-rays/pixel/second. Pixel front-end linearity was evaluated by direct current injection and results are presented. A small-scale readout ASIC utilizing these pixel architectures has been fabricated and the use of these architectures to increase single x-ray pulse dynamic range at XFELs is discussed briefly.
△ Less
Submitted 28 October, 2016;
originally announced October 2016.
-
Characterization of CdTe Sensors with Schottky Contacts Coupled to Charge-Integrating Pixel Array Detectors for X-Ray Science
Authors:
Julian Becker,
Mark W. Tate,
Katherine S. Shanks,
Hugh T. Philipp,
Joel T. Weiss,
Prafull Purohit,
Darol Chamberlain,
Jacob P. C. Ruff,
Sol M. Gruner
Abstract:
Pixel Array Detectors (PADs) consist of an x-ray sensor layer bonded pixel-by-pixel to an underlying readout chip. This approach allows both the sensor and the custom pixel electronics to be tailored independently to best match the x-ray imaging requirements. Here we present characterizations of CdTe sensors hybridized with two different charge-integrating readout chips, the Keck PAD and the Mixed…
▽ More
Pixel Array Detectors (PADs) consist of an x-ray sensor layer bonded pixel-by-pixel to an underlying readout chip. This approach allows both the sensor and the custom pixel electronics to be tailored independently to best match the x-ray imaging requirements. Here we present characterizations of CdTe sensors hybridized with two different charge-integrating readout chips, the Keck PAD and the Mixed-Mode PAD (MM-PAD), both developed previously in our laboratory. The charge-integrating architecture of each of these PADs extends the instantaneous counting rate by many orders of magnitude beyond that obtainable with photon counting architectures. The Keck PAD chip consists of rapid, 8-frame, in-pixel storage elements with framing periods $<$150 ns. The second detector, the MM-PAD, has an extended dynamic range by utilizing an in-pixel overflow counter coupled with charge removal circuitry activated at each overflow. This allows the recording of signals from the single-photon level to tens of millions of x-rays/pixel/frame while framing at 1 kHz. Both detector chips consist of a 128$\times$128 pixel array with (150 $μ$m)$^2$ pixels.
△ Less
Submitted 28 November, 2016; v1 submitted 12 September, 2016;
originally announced September 2016.
-
Site selective growth of heteroepitaxial diamond nanoislands containing single SiV centers
Authors:
Carsten Arend,
Patrick Appel,
Jonas Nils Becker,
Marcel Schmidt,
Martin Fischer,
Stefan Gsell,
Matthias Schreck,
Christoph Becher,
Patrick Maletinsky,
Elke Neu
Abstract:
We demonstrate the controlled preparation of heteroepitaxial diamond nano- and microstructures on silicon wafer based iridium films as hosts for single color centers. Our approach uses electron beam lithography followed by reactive ion etching to pattern the carbon layer formed by bias enhanced nucleation on the iridium surface. In the subsequent chemical vapor deposition process, the patterned ar…
▽ More
We demonstrate the controlled preparation of heteroepitaxial diamond nano- and microstructures on silicon wafer based iridium films as hosts for single color centers. Our approach uses electron beam lithography followed by reactive ion etching to pattern the carbon layer formed by bias enhanced nucleation on the iridium surface. In the subsequent chemical vapor deposition process, the patterned areas evolve into regular arrays of (001) oriented diamond nano-islands with diameters of <500nm and a height of approx. 60 nm. In the islands, we identify single SiV color centers with narrow zero phonon lines down to 1 nm at room temperature.
△ Less
Submitted 9 February, 2016; v1 submitted 11 November, 2015;
originally announced November 2015.
-
A microrod-resonator Brillouin laser with 240 Hz absolute linewidth
Authors:
William Loh,
Joe Becker,
Daniel C. Cole,
Aurelien Coillet,
Fred N. Baynes,
Scott B. Papp,
Scott A. Diddams
Abstract:
We demonstrate an ultralow-noise microrod-resonator based laser that oscillates on the gain supplied by the stimulated Brillouin scattering optical nonlinearity. Microresonator Brillouin lasers are known to offer an outstanding frequency noise floor, which is limited by fundamental thermal fluctuations. Here, we show experimental evidence that thermal effects also dominate the close-to-carrier fre…
▽ More
We demonstrate an ultralow-noise microrod-resonator based laser that oscillates on the gain supplied by the stimulated Brillouin scattering optical nonlinearity. Microresonator Brillouin lasers are known to offer an outstanding frequency noise floor, which is limited by fundamental thermal fluctuations. Here, we show experimental evidence that thermal effects also dominate the close-to-carrier frequency fluctuations. The 6-mm diameter microrod resonator used in our experiments has a large optical mode area of ~100 μm$^2$, and hence its 10 ms thermal time constant filters the close-to-carrier optical frequency noise. The result is an absolute laser linewidth of 240 Hz with a corresponding white-frequency noise floor of 0.1 Hz$^2$/Hz. We explain the steady-state performance of this laser by measurements of its operation state and of its mode detuning and lineshape. Our results highlight a mechanism for noise that is common to many microresonator devices due to the inherent coupling between intracavity power and mode frequency. We demonstrate the ability to reduce this noise through a feedback loop that stabilizes the intracavity power.
△ Less
Submitted 28 September, 2015;
originally announced September 2015.
-
Why is GDP growth linear?
Authors:
Jörg D. Becker
Abstract:
In many European countries the growth of the real GDP per capita has been linear since 1950. An explanation for this linearity is still missing. We propose that in artificial intelligence we may find models for a linear growth of performance. We also discuss possible consequences of the fact that in systems with linear growth the percentage growth goes to zero.
In many European countries the growth of the real GDP per capita has been linear since 1950. An explanation for this linearity is still missing. We propose that in artificial intelligence we may find models for a linear growth of performance. We also discuss possible consequences of the fact that in systems with linear growth the percentage growth goes to zero.
△ Less
Submitted 18 August, 2015;
originally announced August 2015.
-
A physical model for dementia
Authors:
Oscar Sotolongo-Costa,
L. M. Gaggero-Sager,
J. T. Becker,
F. Maestú,
O. Sotolongo-Grau
Abstract:
Aging associated brain decline often result in some kind of dementia. Even when this is a complex brain disorder a physical model can be used in order to describe its general behavior. This model is based in first principles. A probabilistic model for the development of dementia is obtained and fitted to some experimental data obtained from the Alzheimer's Disease Neuroimaging Initiative. It is ex…
▽ More
Aging associated brain decline often result in some kind of dementia. Even when this is a complex brain disorder a physical model can be used in order to describe its general behavior. This model is based in first principles. A probabilistic model for the development of dementia is obtained and fitted to some experimental data obtained from the Alzheimer's Disease Neuroimaging Initiative. It is explained how dementia appears as a consequence of aging and why it is irreversible.
△ Less
Submitted 21 July, 2016; v1 submitted 4 October, 2014;
originally announced October 2014.
-
Carrier-phase Two-Way Satellite Frequency Transfer over a Very Long Baseline
Authors:
M Fujieda,
D Piester,
T Gotoh,
J Becker,
M Aida,
A Bauch
Abstract:
In this paper we report that carrier-phase two-way satellite time and frequency transfer (TWSTFT) was successfully demonstrated over a very long baseline of 9,000 km, established between the National Institute of Information and Communications Technology (NICT) and the Physikalisch-Technische Bundesanstalt (PTB). We verified that the carrier-phase TWSTFT (TWCP) result agreed with those obtained by…
▽ More
In this paper we report that carrier-phase two-way satellite time and frequency transfer (TWSTFT) was successfully demonstrated over a very long baseline of 9,000 km, established between the National Institute of Information and Communications Technology (NICT) and the Physikalisch-Technische Bundesanstalt (PTB). We verified that the carrier-phase TWSTFT (TWCP) result agreed with those obtained by conventional TWSTFT and GPS carrier-phase (GPSCP) techniques. Moreover, a much improved short-term instability for frequency transfer of $2\times10^{-13}$ at 1 s was achieved, which is at the same level as previously confirmed over a shorter baseline within Japan. The precision achieved was so high that the effects of ionospheric delay became significant which are ignored in conventional TWSTFT even over a long link. We compensated for these effects using ionospheric delays computed from regional vertical total electron content maps. The agreement between the TWCP and GPSCP results was improved because of this compensation.
△ Less
Submitted 13 March, 2014;
originally announced March 2014.
-
Intensity interferometry of single x-ray pulses from a synchrotron storage ring
Authors:
A. Singer,
U. Lorenz,
A. Marras,
A. Klyuev,
J. Becker,
K. Schlage,
P. Skopintsev,
O. Gorobtsov,
A. Shabalin,
H. -C. Wille,
H. Franz,
H. Graafsma,
I. A. Vartanyants
Abstract:
We report on measurements of second-order intensity correlations at the high brilliance storage ring PETRA III using a prototype of the newly developed Adaptive Gain Integrating Pixel Detector (AGIPD). The detector recorded individual synchrotron radiation pulses with an x-ray photon energy of 14.4 keV and repetition rate of about 5 MHz. The second-order intensity correlation function was measured…
▽ More
We report on measurements of second-order intensity correlations at the high brilliance storage ring PETRA III using a prototype of the newly developed Adaptive Gain Integrating Pixel Detector (AGIPD). The detector recorded individual synchrotron radiation pulses with an x-ray photon energy of 14.4 keV and repetition rate of about 5 MHz. The second-order intensity correlation function was measured simultaneously at different spatial separations that allowed to determine the transverse coherence length at these x-ray energies. The measured values are in a good agreement with theoretical simulations based on the Gaussian Schell-model.
△ Less
Submitted 13 February, 2014;
originally announced February 2014.
-
Olivine or Impact Melt: Nature of the "Orange" Material on Vesta from Dawn
Authors:
Lucille Le Corre,
Vishnu Reddy,
Nico Schmedemann,
Kris J. Becker,
David P. O'Brien,
Naoyuki Yamashita,
Patrick N. Peplowski,
Thomas H. Prettyman,
Jian-Yang Li,
Edward A. Cloutis,
Brett W. Denevi,
Thomas Kneissl,
Eric Palmer,
Robert W. Gaskell,
Andreas Nathues,
Michael J. Gaffey,
David W. Mittlefehldt,
William B. Garry,
Holger Sierks,
Christopher T. Russell,
Carol A. Raymond
Abstract:
NASA's Dawn mission observed a great variety of colored terrains on asteroid (4) Vesta during its survey with the Framing Camera (FC). Here we present a detailed study of the orange material on Vesta, which was first observed in color ratio images obtained by the FC and presents a red spectral slope. The orange material deposits can be classified into three types, a) diffuse ejecta deposited by re…
▽ More
NASA's Dawn mission observed a great variety of colored terrains on asteroid (4) Vesta during its survey with the Framing Camera (FC). Here we present a detailed study of the orange material on Vesta, which was first observed in color ratio images obtained by the FC and presents a red spectral slope. The orange material deposits can be classified into three types, a) diffuse ejecta deposited by recent medium-size impact craters (such as Oppia), b) lobate patches with well-defined edges, and c) ejecta rays from fresh-looking impact craters. The location of the orange diffuse ejecta from Oppia corresponds to the olivine spot nicknamed "Leslie feature" first identified by Gaffey (1997) from ground-based spectral observations. The distribution of the orange material in the FC mosaic is concentrated on the equatorial region and almost exclusively outside the Rheasilvia basin. Our in-depth analysis of the composition of this material uses complementary observations from FC, the visible and infrared spectrometer (VIR), and the Gamma Ray and Neutron Detector (GRaND). Combining the interpretations from the topography, geomorphology, color and spectral parameters, and elemental abundances, the most probable analog for the orange material on Vesta is impact melt.
△ Less
Submitted 5 August, 2013;
originally announced August 2013.
-
arXiv:1307.6608
[pdf]
astro-ph.EP
astro-ph.IM
physics.geo-ph
physics.ins-det
physics.space-ph
Comparing Dawn, Hubble Space Telescope, and Ground-Based Interpretations of (4) Vesta
Authors:
Vishnu Reddy,
Jian-Yang Li,
Lucille Le Corre,
Jennifer E. C. Scully,
Robert Gaskell,
Christopher T. Russell,
Ryan S. Park,
Andreas Nathues,
Carol Raymond,
Michael J. Gaffey,
Holger Sierks,
Kris J. Becker,
Lucy A. McFadden
Abstract:
Observations of asteroid 4 Vesta by NASA's Dawn spacecraft are interesting because its surface has the largest range of albedo, color and composition of any other asteroid visited by spacecraft to date. These hemispherical and rotational variations in surface brightness and composition have been attributed to impact processes since Vesta's formation. Prior to Dawn's arrival at Vesta, its surface p…
▽ More
Observations of asteroid 4 Vesta by NASA's Dawn spacecraft are interesting because its surface has the largest range of albedo, color and composition of any other asteroid visited by spacecraft to date. These hemispherical and rotational variations in surface brightness and composition have been attributed to impact processes since Vesta's formation. Prior to Dawn's arrival at Vesta, its surface properties were the focus of intense telescopic investigations for nearly a hundred years. Ground-based photometric and spectroscopic observations first revealed these variations followed later by those using Hubble Space Telescope. Here we compare interpretations of Vesta's rotation period, pole, albedo, topographic, color, and compositional properties from ground-based telescopes and HST with those from Dawn. Rotational spectral variations observed from ground-based studies are also consistent with those observed by Dawn. While the interpretation of some of these features was tenuous from past data, the interpretations were reasonable given the limitations set by spatial resolution and our knowledge of Vesta and HED meteorites at that time. Our analysis shows that ground-based and HST observations are critical for our understanding of small bodies and provide valuable support for ongoing and future spacecraft missions.
△ Less
Submitted 24 July, 2013;
originally announced July 2013.
-
Challenges for the Adaptive Gain Integrating Pixel Detector (AGIPD) design due to the high intensity photon radiation environment at the European XFEL
Authors:
J. Becker,
L. Bianco,
P. Göttlicher,
H. Graafsma,
H. Hirsemann,
S. Jack,
A. Klyuev,
S. Lange A. Marras,
U. Trunk,
R. Klanner,
J. Schwandt,
J. Zhang,
R. Dinapoli,
D. Greiffenberg,
B. Henrich,
A. Mozzanica,
B. Schmitt,
X. Shi,
M. Gronewald,
H. Krüger
Abstract:
The European X-ray Free Electron Laser (XFEL) is a new research facility currently under construction in Hamburg, Germany. With a pulse length of less than 100 fs and an extremely high luminosity of 27000 flashes per second the European XFEL will have a unique time structure that demands the development of new detectors tailored to the requirements imposed by the experiments while complying with t…
▽ More
The European X-ray Free Electron Laser (XFEL) is a new research facility currently under construction in Hamburg, Germany. With a pulse length of less than 100 fs and an extremely high luminosity of 27000 flashes per second the European XFEL will have a unique time structure that demands the development of new detectors tailored to the requirements imposed by the experiments while complying with the machine specific operation parameters. The Adaptive Gain Integrating Pixel Detector (AGIPD) is one response to the need for large 2D detectors, able to cope with the 4.5 MHz frame rate, as well as with the high dynamic range needed by XFEL experiments ranging from single photons to more than 10$^4$ 12 keV photons per pixel per pulse. In addition it has to withstand doses of up to 1 GGy over three years.
△ Less
Submitted 11 March, 2013;
originally announced March 2013.
-
Performance tests of an AGIPD 0.4 assembly at the beamline P10 of PETRA III
Authors:
J. Becker,
A. Marras,
A. Klyuev,
F. Westermeier,
U. Trunk,
H. Graafsma
Abstract:
The Adaptive Gain Integrating Pixel Detector (AGIPD) is a novel detector system, currently under development by a collaboration of DESY, the Paul Scherrer Institute in Switzerland, the University of Hamburg and the University of Bonn, and is primarily designed for use at the European XFEL. To verify key features of this detector, an AGIPD 0.4 test chip assembly was tested at the P10 beamline of th…
▽ More
The Adaptive Gain Integrating Pixel Detector (AGIPD) is a novel detector system, currently under development by a collaboration of DESY, the Paul Scherrer Institute in Switzerland, the University of Hamburg and the University of Bonn, and is primarily designed for use at the European XFEL. To verify key features of this detector, an AGIPD 0.4 test chip assembly was tested at the P10 beamline of the PETRA III synchrotron at DESY. The test chip successfully imaged both the direct synchrotron beam and single 7.05 keV photons at the same time, demonstrating the large dynamic range required for XFEL experiments. X-ray scattering measurements from a test sample agree with standard measurements and show the chip's capability of observing dynamics at the microsecond time scale.
△ Less
Submitted 14 May, 2013; v1 submitted 11 March, 2013;
originally announced March 2013.
-
Study of the accumulation layer and charge losses at the Si-SiO2 interface in p+n-silicon strip sensors
Authors:
Thomas Poehlsen,
Julian Becker,
Eckhart Fretwurst,
Robert Klanner,
Jörn Schwandt,
Jiaguo Zhang
Abstract:
Using the multi-channel Transient Current Technique the currents induced by electron-hole pairs, produced by a focussed sub-nanosecond laser of 660 nm wavelength close to the Si-SiO2 interface of p+n silicon strip sensors have been measured, and the charge-collection efficiency determined.
The laser has been operated in burst mode, with bursts typically spaced by 1 ms, each consisting of 30 puls…
▽ More
Using the multi-channel Transient Current Technique the currents induced by electron-hole pairs, produced by a focussed sub-nanosecond laser of 660 nm wavelength close to the Si-SiO2 interface of p+n silicon strip sensors have been measured, and the charge-collection efficiency determined.
The laser has been operated in burst mode, with bursts typically spaced by 1 ms, each consisting of 30 pulses separated by 50 ns.
In a previous paper it has been reported that, depending on X-ray-radiation damage, biasing history and humidity, situations without charge losses, with hole losses, and with electron losses have been observed.
In this paper we show for sensors before and after irradiation by X-rays to 1 MGy (SiO2), how the charge losses change with the number of electron-hole pairs generated by each laser pulse, and the time interval between the laser pulses.
This allows us to estimate how many additional charges in the accumulation layers at the Si-SiO2 interface have to be trapped to significantly change the local electric field, as well as the time it takes that the accumulation layer and the electric field return to the steady-state situation.
In addition, results are presented on the change of the pulse shape caused by the plasma effect for high charge densities deposited close to the Si-SiO2 interface.
△ Less
Submitted 25 February, 2013;
originally announced February 2013.
-
Challenges for Silicon Pixel Sensors at the European XFEL
Authors:
Robert Klanner,
Julian Becker,
Eckhart Fretwurst,
Ioana Pintilie,
Thomas Poehlsen,
Jörn Schwandt,
Jiaguo Zhang
Abstract:
A systematic experimental study of the main challenges for silicon-pixel sensors at the European XFEL is presented. The high instantaneous density of X-rays and the high repetition rate of the XFEL pulses result in signal distortions due to the plasma effect and in severe radiation damage. The main parameters of X-ray-radiation damage have been determined and their impact on p+n sensors investigat…
▽ More
A systematic experimental study of the main challenges for silicon-pixel sensors at the European XFEL is presented. The high instantaneous density of X-rays and the high repetition rate of the XFEL pulses result in signal distortions due to the plasma effect and in severe radiation damage. The main parameters of X-ray-radiation damage have been determined and their impact on p+n sensors investigated. These studies form the basis of the optimized design of a pixel-sensor for experimentation at the European XFEL.
△ Less
Submitted 20 December, 2012;
originally announced December 2012.
-
Measurements of Baryon Pair Decays of $χ_{cJ}$ Mesons
Authors:
M. Ablikim,
M. N. Achasov,
O. Albayrak,
D. J. Ambrose,
F. F. An,
Q. An,
J. Z. Bai,
Y. Ban,
J. Becker,
J. V. Bennett,
M. Bertani,
J. M. Bian,
E. Boger,
O. Bondarenko,
I. Boyko,
R. A. Briere,
V. Bytev,
X. Cai,
O. Cakir,
A. Calcaterra,
G. F. Cao,
S. A. Cetin,
J. F. Chang,
G. Chelkov,
G. Chen
, et al. (326 additional authors not shown)
Abstract:
Using 106 $\times 10^{6}$ $ψ^{\prime}$ decays collected with the BESIII detector at the BEPCII, three decays of $χ_{cJ}$ ($J=0,1,2$) with baryon pairs ($\llb$, $\ssb$, $\SSB$) in the final state have been studied. The branching fractions are measured to be $\cal{B}$$(χ_{c0,1,2}\rightarrowΛ\barΛ) =(33.3 \pm 2.0 \pm 2.6)\times 10^{-5}$, $(12.2 \pm 1.1 \pm 1.1)\times 10^{-5}$,…
▽ More
Using 106 $\times 10^{6}$ $ψ^{\prime}$ decays collected with the BESIII detector at the BEPCII, three decays of $χ_{cJ}$ ($J=0,1,2$) with baryon pairs ($\llb$, $\ssb$, $\SSB$) in the final state have been studied. The branching fractions are measured to be $\cal{B}$$(χ_{c0,1,2}\rightarrowΛ\barΛ) =(33.3 \pm 2.0 \pm 2.6)\times 10^{-5}$, $(12.2 \pm 1.1 \pm 1.1)\times 10^{-5}$, $(20.8 \pm 1.6 \pm 2.3)\times 10^{-5}$; $\cal{B}$$(χ_{c0,1,2}\rightarrowΣ^{0}\barΣ^{0})$ = $(47.8 \pm 3.4 \pm 3.9)\times 10^{-5}$, $(3.8 \pm 1.0 \pm 0.5)\times 10^{-5}$, $(4.0 \pm 1.1 \pm 0.5) \times 10^{-5}$; and $\cal{B}$$(χ_{c0,1,2}\rightarrowΣ^{+}\barΣ^{-})$ = $(45.4 \pm 4.2 \pm 3.0)\times 10^{-5}$, $(5.4 \pm 1.5 \pm 0.5)\times 10^{-5}$, $(4.9 \pm 1.9 \pm 0.7)\times 10^{-5}$, where the first error is statistical and the second is systematic. Upper limits on the branching fractions for the decays of $χ_{c1,2}\rightarrowΣ^{0}\barΣ^{0}$, $Σ^{+}\barΣ^{-}$, are estimated to be $\cal{B}$$(χ_{c1}\rightarrowΣ^{0}\barΣ^{0}) < 6.2\times 10^{-5}$, $\cal{B}$$(χ_{c2}\rightarrowΣ^{0}\barΣ^{0}) < 6.5\times 10^{-5}$, $\cal{B}$$(χ_{c1}\rightarrowΣ^{+}\barΣ^{-}) < 8.7\times 10^{-5}$ and $\cal{B}$$(χ_{c2}\rightarrowΣ^{+}\barΣ^{-}) < 8.8\times 10^{-5}$ at the 90% confidence level.
△ Less
Submitted 4 March, 2013; v1 submitted 9 November, 2012;
originally announced November 2012.
-
Delivery of Dark Material to Vesta via Carbonaceous Chondritic Impacts
Authors:
Vishnu Reddy,
Lucille Le Corre,
David P. O'Brien,
Andreas Nathues,
Edward A. Cloutis,
Daniel D. Durda,
William F. Bottke,
Megha U. Bhatt,
David Nesvorny,
Debra Buczkowski,
Jennifer E. C. Scully,
Elizabeth M. Palmer,
Holger Sierks,
Paul J. Mann,
Kris J. Becker,
Andrew W. Beck,
David Mittlefehldt,
Jian-Yang Li,
Robert Gaskell,
Christopher T. Russell,
Michael J. Gaffey,
Harry Y. McSween,
Thomas B. McCord,
Jean-Philippe Combe,
David Blewett
Abstract:
NASA's Dawn spacecraft observations of asteroid (4) Vesta reveal a surface with the highest albedo and color variation of any asteroid we have observed so far. Terrains rich in low albedo dark material (DM) have been identified using Dawn Framing Camera (FC) 0.75 μm filter images in several geologic settings: associated with impact craters (in the ejecta blanket material and/or on the crater walls…
▽ More
NASA's Dawn spacecraft observations of asteroid (4) Vesta reveal a surface with the highest albedo and color variation of any asteroid we have observed so far. Terrains rich in low albedo dark material (DM) have been identified using Dawn Framing Camera (FC) 0.75 μm filter images in several geologic settings: associated with impact craters (in the ejecta blanket material and/or on the crater walls and rims); as flow-like deposits or rays commonly associated with topographic highs; and as dark spots (likely secondary impacts) nearby impact craters. This DM could be a relic of ancient volcanic activity or exogenic in origin. We report that the majority of the spectra of DM are similar to carbonaceous chondrite meteorites mixed with materials indigenous to Vesta. Using high-resolution seven color images we compared DM color properties (albedo, band depth) with laboratory measurements of possible analog materials. Band depth and albedo of DM are identical to those of carbonaceous chondrite xenolith-rich howardite Mt. Pratt (PRA) 04401. Laboratory mixtures of Murchison CM2 carbonaceous chondrite and basaltic eucrite Millbillillie also show band depth and albedo affinity to DM. Modeling of carbonaceous chondrite abundance in DM (1-6 vol%) is consistent with howardite meteorites. We find no evidence for large-scale volcanism (exposed dikes/pyroclastic falls) as the source of DM. Our modeling efforts using impact crater scaling laws and numerical models of ejecta reaccretion suggest the delivery and emplacement of this DM on Vesta during the formation of the ~400 km Veneneia basin by a low-velocity (<2 km/sec) carbonaceous impactor. This discovery is important because it strengthens the long-held idea that primitive bodies are the source of carbon and probably volatiles in the early Solar System.
△ Less
Submitted 14 August, 2012;
originally announced August 2012.
-
Technical Design Report for the: PANDA Micro Vertex Detector
Authors:
PANDA Collaboration,
W. Erni,
I. Keshelashvili,
B. Krusche,
M. Steinacher,
Y. Heng,
Z. Liu,
H. Liu,
X. Shen,
Q. Wang,
H. Xu,
M. Albrecht,
J. Becker,
K. Eickel,
F. Feldbauer,
M. Fink,
P. Friedel,
F. H. Heinsius,
T. Held,
H. Koch,
B. Kopf,
M. Leyhe,
C. Motzko,
M. Pelizäus,
J. Pychy
, et al. (436 additional authors not shown)
Abstract:
This document illustrates the technical layout and the expected performance of the Micro Vertex Detector (MVD) of the PANDA experiment. The MVD will detect charged particles as close as possible to the interaction zone. Design criteria and the optimisation process as well as the technical solutions chosen are discussed and the results of this process are subjected to extensive Monte Carlo physics…
▽ More
This document illustrates the technical layout and the expected performance of the Micro Vertex Detector (MVD) of the PANDA experiment. The MVD will detect charged particles as close as possible to the interaction zone. Design criteria and the optimisation process as well as the technical solutions chosen are discussed and the results of this process are subjected to extensive Monte Carlo physics studies. The route towards realisation of the detector is outlined.
△ Less
Submitted 10 August, 2012; v1 submitted 27 July, 2012;
originally announced July 2012.
-
Technical Design Report for the: PANDA Straw Tube Tracker
Authors:
PANDA Collaboration,
W. Erni,
I. Keshelashvili,
B. Krusche,
M. Steinacher,
Y. Heng,
Z. Liu,
H. Liu,
X. Shen,
Q. Wang,
H. Xu,
A. Aab,
M. Albrecht,
J. Becker,
A. Csapó,
F. Feldbauer,
M. Fink,
P. Friedel,
F. H. Heinsius,
T. Held,
L. Klask,
H. Koch,
B. Kopf,
S. Leiber,
M. Leyhe
, et al. (451 additional authors not shown)
Abstract:
This document describes the technical layout and the expected performance of the Straw Tube Tracker (STT), the main tracking detector of the PANDA target spectrometer. The STT encloses a Micro-Vertex-Detector (MVD) for the inner tracking and is followed in beam direction by a set of GEM-stations. The tasks of the STT are the measurement of the particle momentum from the reconstructed trajectory an…
▽ More
This document describes the technical layout and the expected performance of the Straw Tube Tracker (STT), the main tracking detector of the PANDA target spectrometer. The STT encloses a Micro-Vertex-Detector (MVD) for the inner tracking and is followed in beam direction by a set of GEM-stations. The tasks of the STT are the measurement of the particle momentum from the reconstructed trajectory and the measurement of the specific energy-loss for a particle identification. Dedicated simulations with full analysis studies of certain proton-antiproton reactions, identified as being benchmark tests for the whole PANDA scientific program, have been performed to test the STT layout and performance. The results are presented, and the time lines to construct the STT are described.
△ Less
Submitted 4 June, 2012; v1 submitted 24 May, 2012;
originally announced May 2012.
-
The single photon sensitivity of the Adaptive Gain Integrating Pixel Detector
Authors:
Julian Becker,
Dominic Greiffenberg,
Ulrich Trunk,
Xintian Shi,
Roberto Dinapoli,
Aldo Mozzanica,
Beat Henrich,
Bernd Schmitt,
Heinz Graafsma
Abstract:
Single photon sensitivity is an important property of certain detection systems. This work investigated the single photon sensitivity of the Adaptive Gain Integrating Pixel Detector (AGIPD) and its dependence on possible detector noise values. Due to special requirements at the European X-ray Free Electron Laser (XFEL) the AGIPD finds the number of photons absorbed in each pixel by integrating the…
▽ More
Single photon sensitivity is an important property of certain detection systems. This work investigated the single photon sensitivity of the Adaptive Gain Integrating Pixel Detector (AGIPD) and its dependence on possible detector noise values. Due to special requirements at the European X-ray Free Electron Laser (XFEL) the AGIPD finds the number of photons absorbed in each pixel by integrating the total signal. Photon counting is done off line on a thresholded data set.
It was shown that AGIPD will be sensitive to single photons of 8 keV energy or more (detection efficiency $\gg$ 50%, less than 1 count due to noise per 10$^6$ pixels). Should the final noise be at the lower end of the possible range (200 - 400 electrons) single photon sensitivity can also be achieved at 5 keV beam energy.
It was shown that charge summing schemes are beneficial when the noise is sufficiently low. The total detection rate of events is increased and the probability to count a single event multiple times in adjacent pixels is reduced by a factor of up to 40.
The entry window of AGIPD allows 3 keV photons to reach the sensitive volume with approximately 70% probability. Therefore the low energy performance of AGIPD was explored, finding a maximum noise floor below 0.035 hits/pixel/frame at 3 keV beam energy. Depending on the noise level and selected threshold this value can be reduced by a factor of approximately 10. Even though single photon sensitivity, as defined in this work, is not given, imaging at this energy is still possible, allowing Poisson noise limited performance for signals significantly above the noise floor.
△ Less
Submitted 23 July, 2012; v1 submitted 27 March, 2012;
originally announced March 2012.
-
Single-laser 32.5 Tbit/s Nyquist WDM transmission
Authors:
David Hillerkuss,
Rene Schmogrow,
Matthias Meyer,
Stefan Wolf,
Meinert Jordan,
Philipp Kleinow,
Nicole Lindenmann,
Philipp C. Schindler,
Argishti Melikyan,
Xin Yang,
Shalva Ben-Ezra,
Bernd Nebendahl,
Michael Dreschmann,
Joachim Meyer,
Francesca Parmigiani,
Periklis Petropoulos,
Bojan Resan,
Aandreas Oehler,
Kurt Weingarten,
Lars Altenhain,
Tobias Ellermeyer,
Matthias Moeller,
Michael Huebner,
Juergen Becker,
Christian Koos
, et al. (2 additional authors not shown)
Abstract:
We demonstrate 32.5 Tbit/s 16QAM Nyquist WDM transmission over a total length of 227 km of SMF-28 without optical dispersion compensation. A number of 325 optical carriers are derived from a single laser and encoded with dual-polarization 16QAM data using sinc-shaped Nyquist pulses. As we use no guard bands, the carriers have a spacing of 12.5 GHz equal to the Nyquist bandwidth of the data. We ach…
▽ More
We demonstrate 32.5 Tbit/s 16QAM Nyquist WDM transmission over a total length of 227 km of SMF-28 without optical dispersion compensation. A number of 325 optical carriers are derived from a single laser and encoded with dual-polarization 16QAM data using sinc-shaped Nyquist pulses. As we use no guard bands, the carriers have a spacing of 12.5 GHz equal to the Nyquist bandwidth of the data. We achieve a high net spectral efficiency of 6.4 bit/s/Hz using a software-defined transmitter which generates the electrical modulator drive signals in real-time.
△ Less
Submitted 27 January, 2016; v1 submitted 12 March, 2012;
originally announced March 2012.
-
An Improved Search for the Neutron Electric Dipole Moment
Authors:
M. Burghoff,
A. Schnabel,
G. Ban,
T. Lefort,
Y. Lemiere,
O. Naviliat-Cuncic,
E. Pierre,
G. Quemener,
J. Zejma,
M. Kasprzak,
P. Knowles,
A. Weis,
G. Pignol,
D. Rebreyend,
S. Afach,
G. Bison,
J. Becker,
N. Severijns,
S. Roccia,
C. Plonka-Spehr,
J. Zennerz,
W. Heil,
H. C. Koch,
A. Kraft,
T. Lauer
, et al. (12 additional authors not shown)
Abstract:
A permanent electric dipole moment of fundamental spin-1/2 particles violates both parity (P) and time re- versal (T) symmetry, and hence, also charge-parity (CP) symmetry since there is no sign of CPT-violation. The search for a neutron electric dipole moment (nEDM) probes CP violation within and beyond the Stan- dard Model. The experiment, set up at the Paul Scherrer Institute (PSI), an improved…
▽ More
A permanent electric dipole moment of fundamental spin-1/2 particles violates both parity (P) and time re- versal (T) symmetry, and hence, also charge-parity (CP) symmetry since there is no sign of CPT-violation. The search for a neutron electric dipole moment (nEDM) probes CP violation within and beyond the Stan- dard Model. The experiment, set up at the Paul Scherrer Institute (PSI), an improved, upgraded version of the apparatus which provided the current best experimental limit, dn < 2.9E-26 ecm (90% C.L.), by the RAL/Sussex/ILL collaboration: Baker et al., Phys. Rev. Lett. 97, 131801 (2006). In the next two years we aim to improve the sensitivity of the apparatus to sigma(dn) = 2.6E-27 ecm corresponding to an upper limit of dn < 5E-27 ecm (95% C.L.), in case for a null result. In parallel the collaboration works on the design of a new apparatus to further increase the sensitivity to sigma(dn) = 2.6E-28 ecm.
△ Less
Submitted 7 October, 2011;
originally announced October 2011.
-
Simulation study of the impact of AGIPD design choices on X-ray Photon Correlation Spectroscopy utilizing the intensity autocorrelation technique
Authors:
Julian Becker,
Christian Gutt,
Heinz Graafsma
Abstract:
The European XFEL, currently under construction, will produce a coherent X-ray pulse every 222 ns in pulse trains of up to 2700 pulses. In conjunction with the fast 2D area detectors currently under development, it will be possible to perform X-ray Photon Correlation Spectroscopy (XPCS) experiments on sub-microsecond timescales with non-ergodic systems.
A case study for the Adaptive Gain Integra…
▽ More
The European XFEL, currently under construction, will produce a coherent X-ray pulse every 222 ns in pulse trains of up to 2700 pulses. In conjunction with the fast 2D area detectors currently under development, it will be possible to perform X-ray Photon Correlation Spectroscopy (XPCS) experiments on sub-microsecond timescales with non-ergodic systems.
A case study for the Adaptive Gain Integrating Pixel Detector (AGIPD) at the European XFEL employing the intensity autocorrelation technique was performed using the detector simulation tool HORUS. As optimum results from XPCS experiments are obtained when the pixel size approximates the (small) speckle size, the presented study compares the AGIPD (pixel size of (200 $\upmu$m)$^2$) to a possible apertured version of the detector and to a hypothetical system with (100 $\upmu$m)$^2$ pixel size and investigates the influence of intensity fluctuations and incoherent noise on the quality of the acquired data.
The intuitive conclusion that aperturing is not beneficial as data is 'thrown away' was proven to be correct for low intensities. For intensities larger than approximately 1 photon per (100 $\upmu$m)$^2$ aperturing was found to be beneficial, as charge sharing effects were excluded by it.
It was shown that for the investigated case (100 $\upmu$m)$^2$ pixels produced significantly better results than (200 $\upmu$m)$^2$ pixels when the average intensity exceeded approximately 0.05 photons per (100 $\upmu$m)$^2$.
Although the systems were quite different in design they varied in the signal to noise ratio only by a factor of 2-3, and even less in the relative error of the extracted correlation constants. However the dependence on intensity showed distinctively different features for the different systems.
△ Less
Submitted 7 November, 2011; v1 submitted 15 August, 2011;
originally announced August 2011.
-
Properties of a radiation-induced charge multiplication region in epitaxial silicon diodes
Authors:
Jörn Lange,
Julian Becker,
Eckhart Fretwurst,
Robert Klanner,
Gunnar Lindström
Abstract:
Charge multiplication (CM) in p$^+$n epitaxial silicon pad diodes of 75, 100 and 150 $\upmu$m thickness at high voltages after proton irradiation with 1 MeV neutron equivalent fluences in the order of $10^{16}$ cm$^{-2}$ was studied as an option to overcome the strong trap** of charge carriers in the innermost tracking region of future Super-LHC detectors. Charge collection efficiency (CCE) meas…
▽ More
Charge multiplication (CM) in p$^+$n epitaxial silicon pad diodes of 75, 100 and 150 $\upmu$m thickness at high voltages after proton irradiation with 1 MeV neutron equivalent fluences in the order of $10^{16}$ cm$^{-2}$ was studied as an option to overcome the strong trap** of charge carriers in the innermost tracking region of future Super-LHC detectors. Charge collection efficiency (CCE) measurements using the Transient Current Technique (TCT) with radiation of different penetration (670, 830, 1060 nm laser light and $α$-particles with optional absorbers) were used to locate the CM region close to the p$^+$-implantation. The dependence of CM on material, thickness of the epitaxial layer, annealing and temperature was studied. The collected charge in the CM regime was found to be proportional to the deposited charge, uniform over the diode area and stable over a period of several days. Randomly occurring micro discharges at high voltages turned out to be the largest challenge for operation of the diodes in the CM regime. Although at high voltages an increase of the TCT baseline noise was observed, the signal-to-noise ratio was found to improve due to CM for laser light. Possible effects on the charge spectra measured with laser light due to statistical fluctuations in the CM process were not observed. In contrast, the relative width of the spectra increased in the case of $α$-particles, probably due to varying charge deposited in the CM region.
△ Less
Submitted 27 July, 2010;
originally announced July 2010.
-
Simulation and Experimental Study of Plasma Effects in Planar Silicon Sensors
Authors:
Julian Becker,
Klaus Gärtner,
Robert Klanner,
Rainer Richter
Abstract:
In silicon sensors high densities of electron-hole pairs result in a change of the current pulse shape and spatial distribution of the collected charge compared to the situation in presence of low charge carrier densities. This paper presents a detailed comparison of numerical simulations with time resolved current measurements on planar silicon sensors using 660~nm laser light to create different…
▽ More
In silicon sensors high densities of electron-hole pairs result in a change of the current pulse shape and spatial distribution of the collected charge compared to the situation in presence of low charge carrier densities. This paper presents a detailed comparison of numerical simulations with time resolved current measurements on planar silicon sensors using 660~nm laser light to create different densities of electron hole pairs.
△ Less
Submitted 14 October, 2010; v1 submitted 26 July, 2010;
originally announced July 2010.
-
Measurements of charge carrier mobilities and drift velocity saturation in bulk silicon of <111> and <100> crystal orientation at high electric fields
Authors:
Julian Becker,
Eckhart Fretwurst,
Robert Klanner
Abstract:
The mobility of electrons and holes in silicon depends on many parameters. Two of them are the electric field and the temperature. It has been observed previously that the mobility in the transition region between ohmic transport and saturation velocities is a function of the orientation of the crystal lattice.
This paper presents a new set of parameters for the mobility as function of temperatu…
▽ More
The mobility of electrons and holes in silicon depends on many parameters. Two of them are the electric field and the temperature. It has been observed previously that the mobility in the transition region between ohmic transport and saturation velocities is a function of the orientation of the crystal lattice.
This paper presents a new set of parameters for the mobility as function of temperature and electric field for <111> and <100> crystal orientation. These parameters are derived from time of flight measurements of drifting charge carriers in planar p^+nn^+ diodes in the temperature range between -30°C and 50°C and electric fields of 2x10^3 V/cm to 2x10^4 V/cm.
△ Less
Submitted 14 October, 2010; v1 submitted 26 July, 2010;
originally announced July 2010.
-
Technical Design Report for the PANDA Solenoid and Dipole Spectrometer Magnets
Authors:
The PANDA Collaboration,
W. Erni,
I. Keshelashvili,
B. Krusche,
M. Steinacher,
Y. Heng,
Z. Liu,
H. Liu,
X. Shen,
O. Wang,
H. Xu,
J. Becker,
F. Feldbauer,
F. -H. Heinsius,
T. Held,
H. Koch,
B. Kopf,
M. Pelizaeus,
T. Schroeder,
M. Steinke,
U. Wiedner,
J. Zhong,
A. Bianconi,
M. Bragadireanu,
D. Pantea
, et al. (387 additional authors not shown)
Abstract:
This document is the Technical Design Report covering the two large spectrometer magnets of the PANDA detector set-up. It shows the conceptual design of the magnets and their anticipated performance. It precedes the tender and procurement of the magnets and, hence, is subject to possible modifications arising during this process.
This document is the Technical Design Report covering the two large spectrometer magnets of the PANDA detector set-up. It shows the conceptual design of the magnets and their anticipated performance. It precedes the tender and procurement of the magnets and, hence, is subject to possible modifications arising during this process.
△ Less
Submitted 1 July, 2009;
originally announced July 2009.
-
Technical Design Report for PANDA Electromagnetic Calorimeter (EMC)
Authors:
PANDA Collaboration,
W. Erni,
I. Keshelashvili,
B. Krusche,
M. Steinacher,
Y. Heng,
Z. Liu,
H. Liu,
X. Shen,
O. Wang,
H. Xu,
J. Becker,
F. Feldbauer,
F. -H. Heinsius,
T. Held,
H. Koch,
B. Kopf,
M. Pelizaeus,
T. Schroeder,
M. Steinke,
U. Wiedner,
J. Zhong,
A. Bianconi,
M. Bragadireanu,
D. Pantea
, et al. (387 additional authors not shown)
Abstract:
This document presents the technical layout and the envisaged performance of the Electromagnetic Calorimeter (EMC) for the PANDA target spectrometer. The EMC has been designed to meet the physics goals of the PANDA experiment, which is being developed for the Facility for Antiproton and Ion Research (FAIR) at Darmstadt, Germany. The performance figures are based on extensive prototype tests and…
▽ More
This document presents the technical layout and the envisaged performance of the Electromagnetic Calorimeter (EMC) for the PANDA target spectrometer. The EMC has been designed to meet the physics goals of the PANDA experiment, which is being developed for the Facility for Antiproton and Ion Research (FAIR) at Darmstadt, Germany. The performance figures are based on extensive prototype tests and radiation hardness studies. The document shows that the EMC is ready for construction up to the front-end electronics interface.
△ Less
Submitted 7 October, 2008;
originally announced October 2008.
-
Adiabatic orientation of rotating dipole molecules in an external field
Authors:
J. Bulthuis,
J. A. Becker,
R. Moro,
V. V. Kresin
Abstract:
The induced polarization of a beam of polar clusters or molecules passing through an electric or magnetic field region differs from the textbook Langevin-Debye susceptibility. This distinction, which is important for the interpretation of deflection and focusing experiments, arises because instead of acquiring thermal equilibrium in the field region, the beam ensemble typically enters the field…
▽ More
The induced polarization of a beam of polar clusters or molecules passing through an electric or magnetic field region differs from the textbook Langevin-Debye susceptibility. This distinction, which is important for the interpretation of deflection and focusing experiments, arises because instead of acquiring thermal equilibrium in the field region, the beam ensemble typically enters the field adiabatically, i.e., with a previously fixed distribution of rotational states. We discuss the orientation of rigid symmetric-top systems with a body-fixed electric or magnetic dipole moment. The analytical expression for their "adiabatic-entry" orientation is elucidated and compared with exact numerical results for a range of parameters. The differences between the polarization of thermodynamic and "adiabatic-entry" ensembles, of prolate and oblate tops, and of symmetric-top and linear rotators are illustrated and identified.
△ Less
Submitted 6 May, 2008;
originally announced May 2008.
-
A Vertex Trigger based on Cylindrical Multiwire Proportional Chambers
Authors:
J. Becker,
K. Bösiger,
L. Lindfeld,
K. Müller,
P. Robmann,
S. Schmitt,
C. Schmitz,
S. Steiner,
U. Straumann,
K. Szeker,
P. Truöl,
M. Urban,
A. Vollhardt,
N. Werner,
D. Baumeister,
S. Löchner,
M. Hildebrandt
Abstract:
The article describes the technical implementation and the performance of the z-vertex trigger (CIP2k), which is part of the H1-experiment at HERA.
The article describes the technical implementation and the performance of the z-vertex trigger (CIP2k), which is part of the H1-experiment at HERA.
△ Less
Submitted 29 December, 2006;
originally announced January 2007.
-
Closed-form expressions for correlated density matrices: application to dispersive interactions and example of (He)2
Authors:
Sebastien Ragot,
Pierre J. Becker
Abstract:
Empirically correlated density matrices of N-electron systems are investigated. Exact closed-form expressions are derived for the one- and two-electron reduced density matrices from a general pairwise correlated wave function. Approximate expressions are proposed which reflect dispersive interactions between closed-shell centro-symmetric subsystems. Said expressions clearly illustrate the conseq…
▽ More
Empirically correlated density matrices of N-electron systems are investigated. Exact closed-form expressions are derived for the one- and two-electron reduced density matrices from a general pairwise correlated wave function. Approximate expressions are proposed which reflect dispersive interactions between closed-shell centro-symmetric subsystems. Said expressions clearly illustrate the consequences of second-order correlation effects on the reduced density matrices. Application is made to a simple example: the (He)2 system. Reduced density matrices are explicitly calculated, correct to second order in correlation, and compared with approximations of independent electrons and independent electron pairs. The models proposed allow for variational calculations of interaction energies and equilibrium distance as well as a clear interpretation of dispersive effects on electron distributions. Both exchange and second order correlation effects are shown to play a critical role on the quality of the results.
△ Less
Submitted 15 June, 2006;
originally announced June 2006.