Showing 1–8 of 8 results for author: Becker, D T

A tabletop x-ray tomography instrument for nanometer-scale imaging: demonstration of the 1,000-element transition-edge sensor subarray

Authors: Paul Szypryt, Nathan Nakamura, Daniel T. Becker, Douglas A. Bennett, Amber L. Dagel, W. Bertrand Doriese, Joseph W. Fowler, Johnathon D. Gard, J. Zachariah Harris, Gene C. Hilton, Jozsef Imrek, Edward S. Jimenez, Kurt W. Larson, Zachary H. Levine, John A. B. Mates, D. McArthur, Luis Miaja-Avila, Kelsey M. Morgan, Galen C. O'Neil, Nathan J. Ortiz, Christine G. Pappas, Daniel R. Schmidt, Kyle R. Thompson, Joel N. Ullom, Leila Vale , et al. (6 additional authors not shown)

Abstract: We report on the 1,000-element transition-edge sensor (TES) x-ray spectrometer implementation of the TOMographic Circuit Analysis Tool (TOMCAT). TOMCAT combines a high spatial resolution scanning electron microscope (SEM) with a highly efficient and pixelated TES spectrometer to reconstruct three-dimensional maps of nanoscale integrated circuits (ICs). A 240-pixel prototype spectrometer was recent… ▽ More We report on the 1,000-element transition-edge sensor (TES) x-ray spectrometer implementation of the TOMographic Circuit Analysis Tool (TOMCAT). TOMCAT combines a high spatial resolution scanning electron microscope (SEM) with a highly efficient and pixelated TES spectrometer to reconstruct three-dimensional maps of nanoscale integrated circuits (ICs). A 240-pixel prototype spectrometer was recently used to reconstruct ICs at the 130 nm technology node, but to increase imaging speed to more practical levels, the detector efficiency needs to be improved. For this reason, we are building a spectrometer that will eventually contain 3,000 TES microcalorimeters read out with microwave superconducting quantum interference device (SQUID) multiplexing, and we currently have commissioned a 1,000 TES subarray. This still represents a significant improvement from the 240-pixel system and allows us to begin characterizing the full spectrometer performance. Of the 992 maximimum available readout channels, we have yielded 818 devices, representing the largest number of TES x-ray microcalorimeters simultaneously read out to date. These microcalorimeters have been optimized for pulse speed rather than purely energy resolution, and we measure a FWHM energy resolution of 14 eV at the 8.0 keV Cu K$α$ line. △ Less

Submitted 22 December, 2022; originally announced December 2022.

Comments: 5 pages, 4 figures, submitted to IEEE Transactions on Applied Superconductivity

Journal ref: IEEE Transactions on Applied Superconductivity, vol. 33, no. 5, pp. 1-5, Aug. 2023, Art no. 2100705

Absolute Energy Measurements with Superconducting Transition-Edge Sensors for Muonic X-ray Spectroscopy at 44 keV

Authors: Daikang Yan, Joel C. Weber, Tejas Guruswamy, Kelsey M. Morgan, Galen C. O'Neil, Abigail L. Wessels, Douglas A. Bennett, Christine G. Pappas, John A. Mates, Johnathon D. Gard, Daniel T. Becker, Joseph W. Fowler, Daniel S. Swetz, Daniel R. Schmidt, Joel N. Ullom, Takuma Okumura, Tadaaki Isobe, Toshiyuki Azuma, Shinji Okada, Shinya Yamada, Tadashi Hashimoto, Orlando Quaranta, Antonino Miceli, Lisa M. Gades, Umeshkumar M. Patel , et al. (3 additional authors not shown)

Abstract: Superconducting transition-edge sensor (TES) microcalorimeters have great utility in x-ray applications owing to their high energy resolution, good collecting efficiency and the feasibility of being multiplexed into large arrays. In this work, we develop hard x-ray TESs to measure the absolute energies of muonic-argon ($μ$-Ar) transition lines around 44 keV and 20 keV. TESs with sidecar absorbers… ▽ More Superconducting transition-edge sensor (TES) microcalorimeters have great utility in x-ray applications owing to their high energy resolution, good collecting efficiency and the feasibility of being multiplexed into large arrays. In this work, we develop hard x-ray TESs to measure the absolute energies of muonic-argon ($μ$-Ar) transition lines around 44 keV and 20 keV. TESs with sidecar absorbers of different heat capacities were fabricated and characterized for their energy resolution and calibration uncertainty. We achieved ~ 1 eV absolute energy measurement accuracy at 44 keV, and < 12 eV energy resolution at 17.5 keV. △ Less

Submitted 21 July, 2022; originally announced July 2022.

Quantification of 242Pu with a Microcalorimeter Gamma Spectrometer

Authors: David J. Mercer, Ryan Winkler, Katrina E. Koehler, Daniel T. Becker, Douglas A. Bennett, Matthew H. Carpenter, Mark P. Croce, Krystal I. de Castro, Eric A. Feissle, Joseph W. Fowler, Johnathon D. Gard, John A. B. Mates, Daniel G. McNeel, Nathan J. Ortiz, Daniel Schmidt, Katherine A. Schreiber, Daniel S. Swetz, Joel N. Ullom, Leila R. Vale, Sophie L. Weidenbenner, Abigail L. Wessels

Abstract: We report measurements of the 103-keV and 159-keV gamma ray signatures of 242Pu using microcalorimetry. This is the first observation of these gamma rays in a non-destructive measurement of an unprepared sample, and so represents an important advance in nuclear material accountancy. The measurement campaign also serves as the first demonstration of a field campaign with a portable microcalorimeter… ▽ More We report measurements of the 103-keV and 159-keV gamma ray signatures of 242Pu using microcalorimetry. This is the first observation of these gamma rays in a non-destructive measurement of an unprepared sample, and so represents an important advance in nuclear material accountancy. The measurement campaign also serves as the first demonstration of a field campaign with a portable microcalorimeter gamma-ray spectrometer. For the 103-keV gamma ray we report an improved centroid energy and emission probability. △ Less

Submitted 8 July, 2022; v1 submitted 6 February, 2022; originally announced February 2022.

Comments: 6 pages, 7 figures

Report number: LA-UR-22-20077

Progress in the development of TES microcalorimeter detectors suitable for neutrino mass measurement

Authors: A. Giachero, B. Alpert, D. T. Becker, D. A. Bennett, M. Borghesi, M. De Gerone, M. Faverzani, M. Fedkevych, E. Ferri, G. Gallucci, J. D. Gard, F. Gatti, G. C. Hilton, J. A. B. Mates, A. Nucciotti, G. Pessina, A. Puiu, C. D. Reintsema, D. R. Schmidt, D. S. Swetz, J. N. Ullom, L. R. Vale

Abstract: The HOLMES experiment will perform a precise calorimetric measurement of the end point of the Electron Capture (EC) decay spectrum of 163Ho in order to extract information on neutrino mass with a sensitivity below 2 eV. In its final configuration, HOLMES will deploy 1000 detectors of low-temperature microcalorimeters with implanted 163Ho nuclei. The baseline sensors for HOLMES are Mo/Cu TESs (Tran… ▽ More The HOLMES experiment will perform a precise calorimetric measurement of the end point of the Electron Capture (EC) decay spectrum of 163Ho in order to extract information on neutrino mass with a sensitivity below 2 eV. In its final configuration, HOLMES will deploy 1000 detectors of low-temperature microcalorimeters with implanted 163Ho nuclei. The baseline sensors for HOLMES are Mo/Cu TESs (Transition Edge Sensors) on SiNx membrane with gold absorbers. Considering the large number of pixels and an event rate of about 300 Hz/pixel, a large multiplexing factor and a large bandwidth are needed. To fulfill this requirement, HOLMES will exploit recent advances in microwave multiplexing. In this contribution, we present the status of the activities in development, the performances of the developed microwave-multiplexed readout system, and the results obtained with the detectors specifically designed for HOLMES in terms of noise, time, and energy resolutions △ Less

Submitted 7 January, 2021; originally announced January 2021.

Improved Plutonium and Americium Photon Branching Ratios from Microcalorimeter Gamma Spectroscopy

Authors: Michael D. Yoho, Katrina E. Koehler, Daniel T. Becker, Douglas A. Bennett, Matthew H. Carpenter, Mark P. Croce, Johnathon D. Gard, J. A. Ben Mates, David J. Mercer, Nathan J. Ortiz, Daniel R. Schmidt, Chandler M. Smith, Daniel S. Swetz, Aidan D. Tollefson, Joel N. Ullom, Leila R. Vale, Abigail L. Wessels, Duc T. Vo

Abstract: Photon branching ratios are critical input data for activities such as nuclear materials protection and accounting because they allow material compositions to be extracted from measurements of gamma-ray intensities. Uncertainties in these branching ratios are often a limiting source of uncertainty in composition determination. Here, we use high statistics, high resolution (~60-70eV full-width-at-h… ▽ More Photon branching ratios are critical input data for activities such as nuclear materials protection and accounting because they allow material compositions to be extracted from measurements of gamma-ray intensities. Uncertainties in these branching ratios are often a limiting source of uncertainty in composition determination. Here, we use high statistics, high resolution (~60-70eV full-width-at-half-maximum at 100 keV) gamma-ray spectra acquired using microcalorimeter sensors to substantially reduce the uncertainties for 11 plutonium (238Pu,239Pu,241Pu) and 241Am branching ratios important for material control and accountability and nuclear forensics in the energy range of 125 keV to 208 keV. We show a reduction in uncertainty of over a factor of three for one branching ratio and a factor of 2{3 for four branching ratios. △ Less

Submitted 22 June, 2020; v1 submitted 20 May, 2020; originally announced May 2020.

Comments: 25 pages, 6 figures, 7 tables

Report number: LA-UR-19-31885

Working principle and demonstrator of microwave-multiplexing for the HOLMES experiment microcalorimeters

Authors: D. T. Becker, D. A. Bennett, M. Biasotti, M. Borghesi, V. Ceriale, M. De Gerone, M. Faverzani, E. Ferri, J. W. Fowler, G. Gallucci, J. D. Gard, A. Giachero, J. P. Hays-Wehle, G. C. Hilton, J. A. B Mates, A. Nucciotti, A. Orlando, G. Pessina, A. Puiu, C. D. Reintsema, D. R. Schmidt, D. S. Swetz, J. N. Ullom, L. R Vale

Abstract: The determination of the neutrino mass is an open issue in modern particle physics and astrophysics. The direct mass measurement is the only theory-unrelated experimental tool capable to probe such quantity. The HOLMES experiment aims to measure the end-point energy of the electron capture (EC) decay of $^{163}$Ho with a statistical sensitivity on the neutrino mass as low as $\sim 1$ eV/c$^2$. In… ▽ More The determination of the neutrino mass is an open issue in modern particle physics and astrophysics. The direct mass measurement is the only theory-unrelated experimental tool capable to probe such quantity. The HOLMES experiment aims to measure the end-point energy of the electron capture (EC) decay of $^{163}$Ho with a statistical sensitivity on the neutrino mass as low as $\sim 1$ eV/c$^2$. In order to acquire the large needed statistics, by kee** the pile-up contribution as low as possible, 1024 transition edge sensors (TESs) with high energy and time resolutions will be employed. Microcalorimeter and bolometer arrays based on transition edge sensor with thousands of pixels are under development for several space-based and ground-based applications, including astrophysics, nuclear and particle physics, and materials science. The common necessary challenge is to develop pratical multiplexing techniques in order to simplify the cryogenics and readout systems. Despite the various multiplexing variants which are being developed have been successful, new approaches are needed to enable scaling to larger pixel counts and faster sensors, as requested for HOLMES, reducing also the cost and complexity of readout. A very novel technique that meets all of these requirements is based on superconducting microwave resonators coupled to radio-frequency Superconducting Quantum Interference Devices, in which the the changes in the TES input current is tranduced to a change in phase of a microwave signal. In this work we introduce the basics of this technique, the design and development of the first two-channel read out system and its performances with the first TES detectors specifically designed for HOLMES. In the last part we explain how to extend this approach scaling to 1024 pixels. △ Less

Submitted 11 October, 2019; originally announced October 2019.

Comments: accepted on JINST

Journal ref: JINST 14 (2019) P10035

A Model for Excess Johnson Noise in Superconducting Transition-edge Sensors

Authors: Abigail Wessels, Kelsey Morgan, Daniel T. Becker, Johnathon D. Gard, Gene C. Hilton, John A. B. Mates, Carl D. Reintsema, Daniel R. Schmidt, Daniel S. Swetz, Joel N. Ullom, Leila R. Vale, Douglas A. Bennett

Abstract: Transition-Edge Sensors (TESs) are two-dimensional superconducting films used to detect energy or power. TESs are voltage biased in the resistive transition where the film resistance is both finite and a strong function of temperature. Electrical noise is observed in TESs that exceeds the predictions of existing noise theories. In this manuscript, we describe a model for the unexplained excess noi… ▽ More Transition-Edge Sensors (TESs) are two-dimensional superconducting films used to detect energy or power. TESs are voltage biased in the resistive transition where the film resistance is both finite and a strong function of temperature. Electrical noise is observed in TESs that exceeds the predictions of existing noise theories. In this manuscript, we describe a model for the unexplained excess noise based on the dynamic resistance of the TES and noise mixed down from frequencies around the Josephson oscillations. We derive an expression for the power spectral density of this noise and show that its predictions match measured data. △ Less

Submitted 25 July, 2019; originally announced July 2019.

280 GHz Focal Plane Unit Design and Characterization for the SPIDER-2 Suborbital Polarimeter

Authors: A. S. Bergman, P. A. R. Ade, S. Akers, M. Amiri, J. A. Austermann, J. A. Beall, D. T. Becker, S. J. Benton, J. J. Bock, J. R. Bond, S. A. Bryan, H. C. Chiang, C. R. Contaldi, R. S Domagalski, O. Doré, S. M. Duff, A. J. Duivenvoorden, H. K. Eriksen, M. Farhang, J. P. Filippini, L. M. Fissel, A. A. Fraisse, K. Freese, M. Galloway, A. E. Gambrel , et al. (54 additional authors not shown)

Abstract: We describe the construction and characterization of the 280 GHz bolometric focal plane units (FPUs) to be deployed on the second flight of the balloon-borne SPIDER instrument. These FPUs are vital to SPIDER's primary science goal of detecting or placing an upper limit on the amplitude of the primordial gravitational wave signature in the cosmic microwave background (CMB) by constraining the B-mod… ▽ More We describe the construction and characterization of the 280 GHz bolometric focal plane units (FPUs) to be deployed on the second flight of the balloon-borne SPIDER instrument. These FPUs are vital to SPIDER's primary science goal of detecting or placing an upper limit on the amplitude of the primordial gravitational wave signature in the cosmic microwave background (CMB) by constraining the B-mode contamination in the CMB from Galactic dust emission. Each 280 GHz focal plane contains a 16 x 16 grid of corrugated silicon feedhorns coupled to an array of aluminum-manganese transition-edge sensor (TES) bolometers fabricated on 150 mm diameter substrates. In total, the three 280 GHz FPUs contain 1,530 polarization sensitive bolometers (765 spatial pixels) optimized for the low loading environment in flight and read out by time-division SQUID multiplexing. In this paper we describe the mechanical, thermal, and magnetic shielding architecture of the focal planes and present cryogenic measurements which characterize yield and the uniformity of several bolometer parameters. The assembled FPUs have high yields, with one array as high as 95% including defects from wiring and readout. We demonstrate high uniformity in device parameters, finding the median saturation power for each TES array to be ~3 pW at 300 mK with a less than 6% variation across each array at one standard deviation. These focal planes will be deployed alongside the 95 and 150 GHz telescopes in the SPIDER-2 instrument, slated to fly from McMurdo Station in Antarctica in December 2018. △ Less

Submitted 22 November, 2017; v1 submitted 11 November, 2017; originally announced November 2017.