-
Dust-ion-acoustic damped solitary waves and shocks in laboratory and Saturn's E-ring magnetized nonthermal dusty plasmas with anisotropic ion pressure and dust-charge fluctuation
Authors:
Num Prasad Acharya,
Suresh Basnet,
Amar P. Misra,
Raju Khanal
Abstract:
We study the oblique propagation of weakly nonlinear dust-ion-acoustic (DIA) solitary waves (SWs) and shocks in collisional magnetized nonthermal dusty plasmas that are relevant in laboratory and space (Saturn's E-ring) environments. We consider plasmas to be composed of $q$-nonextensive hot electrons, thermal positive ions, and immobile negatively charged dust grains immersed in a static magnetic…
▽ More
We study the oblique propagation of weakly nonlinear dust-ion-acoustic (DIA) solitary waves (SWs) and shocks in collisional magnetized nonthermal dusty plasmas that are relevant in laboratory and space (Saturn's E-ring) environments. We consider plasmas to be composed of $q$-nonextensive hot electrons, thermal positive ions, and immobile negatively charged dust grains immersed in a static magnetic field and take into account the effects of ion creation (source), and ion loss (sink), ion-neutral and ion-dust collisions, anisotropic ion pressure and dust-charge fluctuations on the evolution of small-amplitude SWs and shocks. The ion-neutral collision enhancement equilibrium dust-charge number is self-consistently determined using Newton's Raphson method. We found that in laboratory dusty plasmas with adiabatic dust-charge variation [i.e., when the dust charging frequency ($ν_{\rm{ch}}$) is much higher than the dust-plasma oscillation frequency ($ω_{\rm{pd}}$)], the DIA solitary waves (DIASWs) get damped by the effects of the ion-dust and ion-neutral collisions, whereas the ion creation and ion loss leads to the amplification of solitary waves, and they appear as only compressive types with positive potential. On the other hand, in Saturn's E-ring plasmas, where the collisional and ion creation or ion loss effects are insignificant, the non-adiabaticity of dust-charge variation can give rise to the evolution of either damped DIASWs or DIA shocks, depending on the smallness of the ratios $ν_{\rm{ch}}/ω_{\rm{pd}}$ or $ω_{\rm{pd}}/ν_{\rm{ch}}$, respectively. Furthermore, two critical values of the nonextensive parameter $q$ exist, below (or above) which, the DIASWs and shocks can appear as rarefactive (or compressive) types. The characteristics of DIASWs and shocks are also analyzed numerically for parameters relevant to the laboratory and Saturn's E-ring plasmas.
△ Less
Submitted 19 May, 2024;
originally announced May 2024.
-
Performance testing of gas-tight portable RPC for muography applications
Authors:
V. Kumar,
S. Basnet,
E. Cortina Gil,
P. Demin,
R. M. I. D. Gamage,
A. Giammanco,
R. Karnam,
M. Moussawi,
A. Samalan,
M. Tytgat,
A. Youssef
Abstract:
This paper reports the latest developmental efforts for a position-sensitive glass-based Resistive Plate Chamber (RPC) and a multi-channel Data AcQuisition (DAQ) system tailored for muon tracking in muography applications. The designed setup prioritizes portability, aiming for field applications where both the detector and the DAQ operate effectively in external environmental conditions. Comprehen…
▽ More
This paper reports the latest developmental efforts for a position-sensitive glass-based Resistive Plate Chamber (RPC) and a multi-channel Data AcQuisition (DAQ) system tailored for muon tracking in muography applications. The designed setup prioritizes portability, aiming for field applications where both the detector and the DAQ operate effectively in external environmental conditions. Comprehensive discussions on hardware development activities and signal processing techniques are included, incorporating noise filtering to enhance the accurate detection of real muons. A muon absorption measurement has also been carried out to understand the behavior of these detectors from an application perspective.
△ Less
Submitted 23 February, 2024; v1 submitted 12 December, 2023;
originally announced December 2023.
-
Simulation tools, first results and experimental status of the MURAVES experiment
Authors:
Andrea Giammanco,
Yanwen Hong,
Marwa Al Moussawi,
Fabio Ambrosino,
Antonio Anastasio,
Samip Basnet,
Lorenzo Bonechi,
Massimo Bongi,
Diletta Borselli,
Alan Bross,
Antonio Caputo,
Roberto Ciaranfi,
Luigi Cimmino,
Vitaliano Ciulli,
Raffaello D'Alessandro,
Mariaelena D'Errico,
Catalin Frosin,
Flora Giudicepietro,
Sandro Gonzi,
Giovanni Macedonio,
Vincenzo Masone,
Massimo Orazi,
Andrea Paccagnella,
Rosario Peluso,
Anna Pla-Dalmau
, et al. (7 additional authors not shown)
Abstract:
The MUon RAdiography of VESuvius (MURAVES) project aims at the study of Mt. Vesuvius, an active and hazardous volcano near Naples, Italy, with the use of muons freely and abundantly produced by cosmic rays. In particular, the MURAVES experiment intends to perform muographic imaging of the internal structure of the summit of Mt. Vesuvius. The challenging measurement of the rock density distribution…
▽ More
The MUon RAdiography of VESuvius (MURAVES) project aims at the study of Mt. Vesuvius, an active and hazardous volcano near Naples, Italy, with the use of muons freely and abundantly produced by cosmic rays. In particular, the MURAVES experiment intends to perform muographic imaging of the internal structure of the summit of Mt. Vesuvius. The challenging measurement of the rock density distribution in its summit by muography, in conjunction with data from other geophysical techniques, can help model possible eruption dynamics. The MURAVES apparatus consists of an array of three independent and identical muon trackers, with a total sensitive area of 3 square meters. In each tracker, a sequence of 4 XY tracking planes made of plastic scintillators is complemented by a 60 cm thick lead wall inserted between the two downstream planes to improve rejection of background from low energy muons. The apparatus is currently acquiring data. This paper presents preliminary results from the analysis of the first data samples acquired with trackers pointing towards Mt. Vesuvius, including the first relative measurement of the density projection of two flanks of the volcano at three different altitudes; we also present the workflow of the simulation chain of the MURAVES experiment and its ongoing developments.
△ Less
Submitted 19 June, 2024; v1 submitted 22 November, 2023;
originally announced November 2023.
-
Small-area Portable Resistive Plate Chambers for Muography
Authors:
Amrutha Samalan,
Samip Basnet,
Eduardo Cortina Gil,
Pavel Demin,
Ishan Darshana Ran Muthugalalage,
Andrea Giammanco,
Raveendrababu Karnam,
Vishal Kumar,
Marwa Al Moussawi,
Michael Tytgat,
Ayman Youssef
Abstract:
Muography is finding applications in various domains such as volcanology, archaeology, civil engineering, industry, mining, and nuclear waste surveys. To simplify transportation and installation in remote locations after laboratory testing, a fully portable and autonomous muon telescope based on Resistive Plate Chambers (RPCs) is being developed. Two glass-RPC prototypes have been created, sharing…
▽ More
Muography is finding applications in various domains such as volcanology, archaeology, civil engineering, industry, mining, and nuclear waste surveys. To simplify transportation and installation in remote locations after laboratory testing, a fully portable and autonomous muon telescope based on Resistive Plate Chambers (RPCs) is being developed. Two glass-RPC prototypes have been created, sharing the same design goals but with different detector parameters, and comparative studies are ongoing. Drawing from prototype experience, a double-gap RPC with advanced features and improved spatial resolution is constructed. Resistive electrodes are produced manually, and a new data acquisition board is currently undergoing calibration. The results on prototype performance, readout board comparisons and the technical progress on the double-gap RPC are presented.
△ Less
Submitted 19 November, 2023;
originally announced November 2023.
-
Portable Resistive Plate Chambers for Muography in confined environments
Authors:
R. M. I. D Gamage,
Samip Basnet,
Eduardo Cortina Gil,
Andrea Giammanco,
Pavel Demin,
Marwa Moussawi,
Amrutha Samalan,
Michael Tytgat,
Raveendrababu Karnam,
Ayman Youssef
Abstract:
Muography (or muon radiography) is an imaging technique that relies on the use of cosmogenic muons as a free and safe radiation source. It can be applied in various fields such as archaeology, civil engineering, geology, nuclear reactor monitoring, nuclear waste characterization, underground surveys, etc. In such applications, sometimes deploying muon detectors is challenging due to logistics, e.g…
▽ More
Muography (or muon radiography) is an imaging technique that relies on the use of cosmogenic muons as a free and safe radiation source. It can be applied in various fields such as archaeology, civil engineering, geology, nuclear reactor monitoring, nuclear waste characterization, underground surveys, etc. In such applications, sometimes deploying muon detectors is challenging due to logistics, e.g. in a narrow underground tunnel or mine. Therefore, we are develo** muon detectors whose design goals include portability, robustness, autonomy, versatility, and safety. Our portable muon detectors (or ``muoscopes'') are based on Resistive Plate Chambers (RPC), planar detectors that use ionization in a thin gas gap to detect cosmic muons. Prototype RPCs of active area $16 \times 16~cm^2$ and $28 \times 28~cm^2$ were built in our laboratories at Louvain-la-Neuve (UCLouvain) and Ghent (UGent) to test and compare various design options. Benefiting from the experience gained in building and operating these prototypes, we are proceeding towards the development of improved prototypes with more advanced technical layout and readiness. In this paper we provide the status of our performance studies, including the cross-validation of the two types of prototypes in a joint data taking, and an outline of the direction ahead.
△ Less
Submitted 20 September, 2022;
originally announced September 2022.
-
The MURAVES experiment: study of the Vesuvius Great Cone with Muon Radiography
Authors:
M. D'Errico,
F. Ambrosino,
A. Anastasio,
S. Basnet,
L. Bonechi,
M. Bongi,
A. Bross,
R. Ciaranfi,
L. Cimmino,
C. Ciulli,
R. D'Alessandro,
A. Giammanco,
F. Giudicepietro,
S. Gonzi,
R. Karnam,
G. Macedonio,
V. Masone,
N. Mori,
M. Moussawi,
M. Orazi,
G. Passeggio,
R. Peluso,
A. Pla-Dalmau,
C. Rendon,
A. Samalan
, et al. (6 additional authors not shown)
Abstract:
The MURAVES experiment aims at the muographic imaging of the internal structure of the summit of Mt. Vesuvius, exploiting muons produced by cosmic rays. Though presently quiescent, the volcano carries a dramatic hazard in its highly populated surroundings. The challenging measurement of the rock density distribution in its summit by muography, in conjunction with data from other geophysical techni…
▽ More
The MURAVES experiment aims at the muographic imaging of the internal structure of the summit of Mt. Vesuvius, exploiting muons produced by cosmic rays. Though presently quiescent, the volcano carries a dramatic hazard in its highly populated surroundings. The challenging measurement of the rock density distribution in its summit by muography, in conjunction with data from other geophysical techniques, can help the modeling of possible eruptive dynamics. The MURAVES apparatus consists of an array of three independent and identical muon trackers, with a total sensitive area of 3 square meters. In each tracker, a sequence of 4 XY tracking planes made of plastic scintillators is complemented by a 60 cm thick lead wall inserted between the two downstream planes to improve rejection of background from low energy muons. The apparatus is currently acquiring data. Preliminary results from the analysis of a first data sample are presented.
△ Less
Submitted 24 February, 2022;
originally announced February 2022.
-
The simulations chain of the MURAVES experiment
Authors:
M. Moussawi,
S. Basnet,
L. Bonechi,
L. Cimmino,
R. DÁlessandro,
M. DÉrrico,
A. Giammanco,
R. Karnam,
G. Macedonio,
C. Rendon,
A. Samalan,
G. Saracino,
M. Tytgat
Abstract:
The MUon RAdiography of VESuvius (MURAVES) project aims at the study of the summital cone of Mt. Vesuvius, an active and hazardous volcano near Naples, Italy. A detailed Monte Carlo simulation framework is necessary in order to investigate the effects of the experimental constraints and to perform comparisons with the actual observations. Our Monte Carlo setup combines a variety of Monte Carlo pro…
▽ More
The MUon RAdiography of VESuvius (MURAVES) project aims at the study of the summital cone of Mt. Vesuvius, an active and hazardous volcano near Naples, Italy. A detailed Monte Carlo simulation framework is necessary in order to investigate the effects of the experimental constraints and to perform comparisons with the actual observations. Our Monte Carlo setup combines a variety of Monte Carlo programs that address different aspects of cosmic muon simulation, from muon generation in the Earth's upper atmosphere to the response of the detector, including the interactions with the material of the volcano. We will elaborate on the rationale for our technical choices, including trade-off between speed and accuracy, and on the lessons learned, which are of general interest for similar use cases in muon radiography.
△ Less
Submitted 7 February, 2022;
originally announced February 2022.
-
Towards a portable high-resolution muon detector based on Resistive Plate Chambers
Authors:
S. Basnet,
E. Cortina Gil,
P. Demin,
R. M. I. D. Gamage,
A. Giammanco,
R. Karnam,
M. Moussawi,
A. Samalan,
M. Tytgat
Abstract:
The use of conventional imaging techniques becomes problematic when faced with challenging logistics and confined environments. In particular, such scenarios are not unusual in the field of archaeological and mining explorations as well as for nuclear waste characterization. For these applications, even the use of muography is complicated since the detectors have to be deployed in difficult areas…
▽ More
The use of conventional imaging techniques becomes problematic when faced with challenging logistics and confined environments. In particular, such scenarios are not unusual in the field of archaeological and mining explorations as well as for nuclear waste characterization. For these applications, even the use of muography is complicated since the detectors have to be deployed in difficult areas with limited room for instrumentation, e.g., narrow tunnels. To address this limitation, we have developed a portable muon detector (muoscope) based on glass Resistive Plate Chambers (RPC) with an active area of 16 $\times$ 16 cm$^{2}$. The specific design goals taken into consideration while develo** our first prototype are portability, robustness, autonomy, versatility, safety and low cost. To help further improve our design goals, we are currently studying the possibility to switch the sensitive units from strips in the old prototype to pixels for the new one However, for performing high resolution muography, the number of readout units per layer will also need to increase significantly, leading to increase in the overall cost and power consumption of the muoscope. To mitigate these issues, we are develo** a novel 2D multiplexing algorithm for reading out several pixels with a single electronic channel. In this article, we give an overview of the detector development, focusing mainly on the design goals and the choice of detector technology. Furthermore, we present the details of the expected changes in the new prototype as well as a simulated 2D multiplexing study based on general principles.
△ Less
Submitted 2 February, 2022;
originally announced February 2022.
-
A portable muon telescope for multidisciplinary applications
Authors:
R. M. I. D Gamage,
S. Basnet,
E. Cortina Gil,
P. Demin,
A. Giammanco,
R. Karnam,
M. Moussawi,
M. Tytgat,
.
Abstract:
Muon tomography or muography is an emerging imaging technique that uses cosmogenic muons as the radiation source. Due to its diverse range of applications and the use of natural radiation, muography is being applied across many fields such as geology, archaeology, civil engineering, nuclear reactor monitoring, nuclear waste characterization, underground surveys, etc. Muons can be detected using va…
▽ More
Muon tomography or muography is an emerging imaging technique that uses cosmogenic muons as the radiation source. Due to its diverse range of applications and the use of natural radiation, muography is being applied across many fields such as geology, archaeology, civil engineering, nuclear reactor monitoring, nuclear waste characterization, underground surveys, etc. Muons can be detected using various detector technologies, among which, resistive plate chambers (RPC) are a very cost effective choice. RPCs are planar detectors which use ionization in a thin gas gap to detect cosmic muons, already used since years in major particle accelerator experiments.
We have developed a muon telescope (or muoscope) composed of small scale RPCs. The design goal for our muoscope is to be portable and autonomous, in order to take data in places that are not easily accessible. The whole setup is light and compact, such to be easily packed in a car trunk. Individual RPCs are hosted in gas-tight aluminium cases. There is no need for gas bottles, once the chambers are filled. The muoscope can be controlled from a reasonable distance using wireless connection.
In this paper, we summarize the guiding principles of our project and present some recent developments and future prospects, including a long-term stability study of the resistivity of the semiconductive coating obtained with serigraphy.
△ Less
Submitted 29 September, 2021;
originally announced September 2021.
-
End-to-end simulations of the MUon RAdiography of VESuvius experiment
Authors:
A. Samalan,
S. Basnet,
L. Bonechi,
L. Cimmino,
R. D. Alessandro,
M. D. Errico,
A. Giammanco,
R. Karnam,
G. Macedonio,
M. Moussawi,
C. Rendon,
G. Saracino,
M. Tytgat
Abstract:
The MUon RAdiography of VESuvius (MURAVES) project aims at the study of the summital cone of Mt. Vesuvius, an active volcano near Naples (Italy), by measuring its density profile through muon flux attenuation. Its data, combined with those from gravimetric and seismic measurement campaigns, will be used for better defining the volcanic plug at the bottom of the crater. We report on the development…
▽ More
The MUon RAdiography of VESuvius (MURAVES) project aims at the study of the summital cone of Mt. Vesuvius, an active volcano near Naples (Italy), by measuring its density profile through muon flux attenuation. Its data, combined with those from gravimetric and seismic measurement campaigns, will be used for better defining the volcanic plug at the bottom of the crater. We report on the development of an end-to-end simulation framework, in order to perform accurate investigations of the effects of the experimental constraints and to compare simulations, under various model hypotheses, with the actual observations. The detector simulation setup is developed using GEANT4 and a study of cosmic particle generators has been conducted to identify the most suitable one for our simulation framework. To mimic the real data, GEANT4 raw hits are converted to clusters through a simulated digitization: energy deposits are first summed per scintillator bar, and then converted to number of photoelectrons with a data-driven procedure. This is followed by the same clustering algorithm and same tracking code as in real data. We also report on the study of muon transport through rock using PUMAS and GEANT4. In this paper we elaborate on the rationale for our technical choices, including trade-off between speed and accuracy. The developments reported here are of general interest in muon radiography and can be applied in similar cases.
△ Less
Submitted 17 November, 2021; v1 submitted 29 September, 2021;
originally announced September 2021.
-
Towards portable muography with small-area, gas-tight glass Resistive Plate Chambers
Authors:
S. Basnet,
E. Cortina Gil,
P. Demin,
R. M. I. D. Gamage,
A. Giammanco,
M. Moussawi,
M. Tytgat,
S. Wuyckens
Abstract:
Imaging techniques that use atmospheric muons, collectively named under the neologism "muography", have seen a tremendous growth in recent times, mainly due to their diverse range of applications. The most well-known ones include but are not limited to: volcanology, archaeology, civil engineering, nuclear reactor monitoring, nuclear waste characterization, underground map**, etc. These methods a…
▽ More
Imaging techniques that use atmospheric muons, collectively named under the neologism "muography", have seen a tremendous growth in recent times, mainly due to their diverse range of applications. The most well-known ones include but are not limited to: volcanology, archaeology, civil engineering, nuclear reactor monitoring, nuclear waste characterization, underground map**, etc. These methods are based on the attenuation or deviation of muons to image large and/or dense objects where conventional techniques cannot work or their use becomes challenging.
In this context, we have constructed a muography telescope based on "mini glass-RPC planes" following a design similar to the glass-RPC detectors developed by the CALICE Collaboration and used by the TOMUVOL experiment in the context of volcano radiography, but with smaller active area (16 $\times$ 16 cm$^{2}$). The compact size makes it an attractive choice with respect to other detectors previously employed for imaging on similar scales. An important innovation in this design is that the detectors are sealed. This makes the detector more portable and solves the usual safety and logistic issues for gas detectors operated underground and/or inside small rooms. This paper provides an overview on our guiding principles, the detector development and our operational experiences. Drawing on the lessons learnt from the first prototype, we also discuss our future direction for an improved second prototype, focusing primarily on a recently adopted serigraphy technique for the resistive coating of the glass plates.
△ Less
Submitted 8 December, 2020; v1 submitted 19 May, 2020;
originally announced May 2020.
-
Dependence of technological improvement on artifact interactions
Authors:
Subarna Basnet,
Christopher L. Magee
Abstract:
Empirical research has shown performance improvement of many different technological domains occurs exponentially but with widely varying improvement rates. What causes some technologies to improve faster than others do? Previous quantitative modeling research has identified artifact interactions, where a design change in one component influences others, as an important determinant of improvement…
▽ More
Empirical research has shown performance improvement of many different technological domains occurs exponentially but with widely varying improvement rates. What causes some technologies to improve faster than others do? Previous quantitative modeling research has identified artifact interactions, where a design change in one component influences others, as an important determinant of improvement rates. The models predict that improvement rate for a domain is proportional to the inverse of the domain interaction parameter. However, no empirical research has previously studied and tested the dependence of improvement rates on artifact interactions. A challenge to testing the dependence is that any method for measuring interactions has to be applicable to a wide variety of technologies. Here we propose a patent-based method that is both technology domain-agnostic and less costly than alternative methods. We use textual content from patent sets in 27 domains to find the influence of interactions on improvement rates. Qualitative analysis identified six specific keywords that signal artifact interactions. Patent sets from each domain were then examined to determine the total count of these 6 keywords in each domain, giving an estimate of artifact interactions in each domain. It is found that improvement rates are positively correlated with the inverse of the total count of keywords with correlation coefficient of +0.56 with a p-value of 0.002. The empirical results agree with model predictions and support the suggestion that domains with higher number of artifacts interactions (higher complexity) will improve at a slower pace.
△ Less
Submitted 22 February, 2016; v1 submitted 11 January, 2016;
originally announced January 2016.