-
CUORE Opens the Door to Tonne-scale Cryogenics Experiments
Authors:
CUORE Collaboration,
D. Q. Adams,
C. Alduino,
F. Alessandria,
K. Alfonso,
E. Andreotti,
F. T. Avignone III,
O. Azzolini,
M. Balata,
I. Bandac,
T. I. Banks,
G. Bari,
M. Barucci,
J. W. Beeman,
F. Bellini,
G. Benato,
M. Beretta,
A. Bersani,
D. Biare,
M. Biassoni,
F. Bragazzi,
A. Branca,
C. Brofferio,
A. Bryant,
A. Buccheri
, et al. (184 additional authors not shown)
Abstract:
The past few decades have seen major developments in the design and operation of cryogenic particle detectors. This technology offers an extremely good energy resolution - comparable to semiconductor detectors - and a wide choice of target materials, making low temperature calorimetric detectors ideal for a variety of particle physics applications. Rare event searches have continued to require eve…
▽ More
The past few decades have seen major developments in the design and operation of cryogenic particle detectors. This technology offers an extremely good energy resolution - comparable to semiconductor detectors - and a wide choice of target materials, making low temperature calorimetric detectors ideal for a variety of particle physics applications. Rare event searches have continued to require ever greater exposures, which has driven them to ever larger cryogenic detectors, with the CUORE experiment being the first to reach a tonne-scale, mK-cooled, experimental mass. CUORE, designed to search for neutrinoless double beta decay, has been operational since 2017 at a temperature of about 10 mK. This result has been attained by the use of an unprecedentedly large cryogenic infrastructure called the CUORE cryostat: conceived, designed and commissioned for this purpose. In this article the main characteristics and features of the cryogenic facility developed for the CUORE experiment are highlighted. A brief introduction of the evolution of the field and of the past cryogenic facilities are given. The motivation behind the design and development of the CUORE cryogenic facility is detailed as are the steps taken toward realization, commissioning, and operation of the CUORE cryostat. The major challenges overcome by the collaboration and the solutions implemented throughout the building of the cryogenic facility will be discussed along with the potential improvements for future facilities. The success of CUORE has opened the door to a new generation of large-scale cryogenic facilities in numerous fields of science. Broader implications of the incredible feat achieved by the CUORE collaboration on the future cryogenic facilities in various fields ranging from neutrino and dark matter experiments to quantum computing will be examined.
△ Less
Submitted 2 December, 2021; v1 submitted 17 August, 2021;
originally announced August 2021.
-
Modeling optical roughness and first-order scattering processes from OSIRIS-REx color images of the rough surface of asteroid (101955) Bennu
Authors:
Pedro H. Hasselmann,
Sonia Fornasier,
Maria A. Barucci,
Alice Praet,
Beth E. Clark,
Jian-Yang Li,
Dathon R. Golish,
Daniella N. DellaGiustina,
Jasinghege Don P. Deshapriya,
Xian-Duan Zou,
Mike G. Daly,
Olivier S. Barnouin,
Amy A. Simon,
Dante S. Lauretta
Abstract:
The dark asteroid (101955) Bennu studied by NASA\textquoteright s OSIRIS-REx mission has a boulder-rich and apparently dust-poor surface, providing a natural laboratory to investigate the role of single-scattering processes in rough particulate media. Our goal is to define optical roughness and other scattering parameters that may be useful for the laboratory preparation of sample analogs, interpr…
▽ More
The dark asteroid (101955) Bennu studied by NASA\textquoteright s OSIRIS-REx mission has a boulder-rich and apparently dust-poor surface, providing a natural laboratory to investigate the role of single-scattering processes in rough particulate media. Our goal is to define optical roughness and other scattering parameters that may be useful for the laboratory preparation of sample analogs, interpretation of imaging data, and analysis of the sample that will be returned to Earth. We rely on a semi-numerical statistical model aided by digital terrain model (DTM) shadow ray-tracing to obtain scattering parameters at the smallest surface element allowed by the DTM (facets of \textasciitilde{}10 cm). Using a Markov Chain Monte Carlo technique, we solved the inversion problem on all four-band images of the OSIRIS-REx mission\textquoteright s top four candidate sample sites, for which high-precision laser altimetry DTMs are available. We reconstructed the \emph{a posteriori} probability distribution for each parameter and distinguished primary and secondary solutions. Through the photometric image correction, we found that a mixing of low and average roughness slope best describes Bennu's surface for up to $90^{\circ}$ phase angle. We detected a low non-zero specular ratio, perhaps indicating exposed sub-centimeter mono-crystalline inclusions on the surface. We report an average roughness RMS slope of $27_{-5}^{\circ+1}$, a specular ratio of $2.6_{-0.8}^{+0.1}\%$, an approx. single-scattering albedo of $4.64_{-0.09}^{+0.08}\%$ at 550 nm, and two solutions for the back-scatter asymmetric factor, $ξ^{(1)}=-0.360\pm0.030$ and $ξ^{(2)}=-0.444\pm0.020$, for all four sites altogether.
△ Less
Submitted 8 October, 2020;
originally announced October 2020.
-
Cryogenic light detectors with enhanced performance for rare events physics
Authors:
M. Barucci,
J. W. Beeman,
V. Caracciolo,
L. Pagnanini,
L. Pattavina,
G. Pessina,
S. Pirro,
C. Rusconi,
K. Schäffner
Abstract:
We have developed and tested a new way of coupling bolometric light detectors to scintillating crystal bolometers based upon simply resting the light detector on the crystal surface, held in position only by gravity. This straightforward mounting results in three important improvements: (1) it decreases the amount of non-active materials needed to assemble the detector, (2) it substantially increa…
▽ More
We have developed and tested a new way of coupling bolometric light detectors to scintillating crystal bolometers based upon simply resting the light detector on the crystal surface, held in position only by gravity. This straightforward mounting results in three important improvements: (1) it decreases the amount of non-active materials needed to assemble the detector, (2) it substantially increases the light collection efficiency by minimizing the light losses induced by the mounting structure, and (3) it enhances the thermal signal induced in the light detector thanks to the extremely weak thermal link to the thermal bath. We tested this new technique with a 16 cm$^2$ Ge light detector with thermistor readout sitting on the surface of a large TeO$_2$ bolometer. The light collection efficiency was increased by greater than 50\% compared to previously tested alternative mountings. We obtained a baseline energy resolution on the light detector of 20~eV RMS that, together with increased light collection, enabled us to obtain the best $α$ vs $β/γ$ discrimination ever obtained with massive TeO$_2$ crystals. At the same time we achieved rise and decay times of 0.8 and 1.6 ms, respectively. This superb performance meets all of the requirements for the CUPID (CUORE Upgrade with Particle IDentification) experiment, which is a 1-ton scintillating bolometer follow up to CUORE.
△ Less
Submitted 29 April, 2019; v1 submitted 29 January, 2019;
originally announced January 2019.
-
First Results from CUORE: A Search for Lepton Number Violation via $0νββ$ Decay of $^{130}$Te
Authors:
CUORE Collaboration,
C. Alduino,
K. Alfonso,
E. Andreotti,
C. Arnaboldi,
F. T. Avignone III,
O. Azzolini,
I. Bandac,
T. I. Banks,
G. Bari,
M. Barucci,
J. W. Beeman,
F. Bellini,
G. Benato,
A. Bersani,
D. Biare,
M. Biassoni,
A. Branca,
C. Brofferio,
A. Bryant,
A. Buccheri,
C. Bucci,
C. Bulfon,
A. Camacho,
A. Caminata
, et al. (140 additional authors not shown)
Abstract:
The CUORE experiment, a ton-scale cryogenic bolometer array, recently began operation at the Laboratori Nazionali del Gran Sasso in Italy. The array represents a significant advancement in this technology, and in this work we apply it for the first time to a high-sensitivity search for a lepton-number--violating process: $^{130}$Te neutrinoless double-beta decay. Examining a total TeO$_2$ exposure…
▽ More
The CUORE experiment, a ton-scale cryogenic bolometer array, recently began operation at the Laboratori Nazionali del Gran Sasso in Italy. The array represents a significant advancement in this technology, and in this work we apply it for the first time to a high-sensitivity search for a lepton-number--violating process: $^{130}$Te neutrinoless double-beta decay. Examining a total TeO$_2$ exposure of 86.3 kg$\cdot$yr, characterized by an effective energy resolution of (7.7 $\pm$ 0.5) keV FWHM and a background in the region of interest of (0.014 $\pm$ 0.002) counts/(keV$\cdot$kg$\cdot$yr), we find no evidence for neutrinoless double-beta decay. The median statistical sensitivity of this search is $7.0\times10^{24}$ yr. Including systematic uncertainties, we place a lower limit on the decay half-life of $T^{0ν}_{1/2}$($^{130}$Te) > $1.3\times 10^{25}$ yr (90% C.L.). Combining this result with those of two earlier experiments, Cuoricino and CUORE-0, we find $T^{0ν}_{1/2}$($^{130}$Te) > $1.5\times 10^{25}$ yr (90% C.L.), which is the most stringent limit to date on this decay. Interpreting this result as a limit on the effective Majorana neutrino mass, we find $m_{ββ}<(110 - 520)$ meV, where the range reflects the nuclear matrix element estimates employed.
△ Less
Submitted 1 April, 2018; v1 submitted 22 October, 2017;
originally announced October 2017.
-
Experimental study of high energy electron interactions in a superconducting aluminum alloy resonant bar
Authors:
M. Barucci,
M. Bassan,
B. Buonomo,
G. Cavallari,
E. Coccia,
S. D'Antonio,
V. Fafone,
C. Ligi,
L. Lolli,
A. Marini,
G. Mazzitelli,
G. Modestino,
G. Pizzella,
L. Quintieri,
L. Risegari,
A. Rocchi,
F. Ronga,
P. Valente,
G. Ventura,
S. M. Vinko
Abstract:
Peak amplitude measurements of the fundamental mode of oscillation of a suspended aluminum alloy bar hit by an electron beam show that the amplitude is enhanced by a factor ~3.5 when the material is in the superconducting state. This result is consistent with the cosmic ray observations made by the resonant gravitational wave detector NAUTILUS, made of the same alloy, when operated in the superc…
▽ More
Peak amplitude measurements of the fundamental mode of oscillation of a suspended aluminum alloy bar hit by an electron beam show that the amplitude is enhanced by a factor ~3.5 when the material is in the superconducting state. This result is consistent with the cosmic ray observations made by the resonant gravitational wave detector NAUTILUS, made of the same alloy, when operated in the superconducting state. A comparison of the experimental data with the predictions of the model describing the underlying physical process is also presented.
△ Less
Submitted 9 January, 2009;
originally announced January 2009.
