-
High-power and narrow-linewidth laser on thin-film lithium niobate enabled by photonic wire bonding
Authors:
Cornelis A. A. Franken,
Rebecca Cheng,
Keith Powell,
Georgios Kyriazidis,
Victoria Rosborough,
Juergen Musolf,
Maximilian Shah,
David R. Barton III,
Gage Hills,
Leif Johansson,
Klaus-J. Boller,
Marko Lončar
Abstract:
Thin-film lithium niobate (TFLN) has emerged as a promising platform for the realization of high performance chip-scale optical systems, spanning a range of applications from optical communications to microwave photonics. Such applications rely on the integration of multiple components onto a single platform. However, while many of these components have already been demonstrated on the TFLN platfo…
▽ More
Thin-film lithium niobate (TFLN) has emerged as a promising platform for the realization of high performance chip-scale optical systems, spanning a range of applications from optical communications to microwave photonics. Such applications rely on the integration of multiple components onto a single platform. However, while many of these components have already been demonstrated on the TFLN platform, to date, a major bottleneck of the platform is the existence of a tunable, high-power, and narrow-linewidth on-chip laser. Here, we address this problem using photonic wire bonding to integrate optical amplifiers with a thin-film lithium niobate feedback circuit, and demonstrate an extended cavity diode laser yielding high on-chip power of 78 mW, side mode suppression larger than 60 dB and wide wavelength tunability over 43 nm. The laser frequency stability over short timescales shows an ultra-narrow intrinsic linewidth of 550 Hz. Long-term recordings indicate a high passive stability of the photonic wire bonded laser with 58 hours of mode-hop-free operation, with a trend in the frequency drift of only 4.4 MHz/h. This work verifies photonic wire bonding as a viable integration solution for high performance on-chip lasers, opening the path to system level upscaling and Watt-level output powers.
△ Less
Submitted 5 July, 2024; v1 submitted 28 June, 2024;
originally announced July 2024.
-
A Thin Film Lithium Niobate Near-Infrared Platform for Multiplexing Quantum Nodes
Authors:
Daniel Assumpcao,
Dylan Renaud,
Aida Baradari,
Beibei Zeng,
Chawina De-Eknamkul,
C. J. Xin,
Amirhassan Shams-Ansari,
David Barton,
Bartholomeus Machielse,
Marko Loncar
Abstract:
Practical quantum networks will require quantum nodes consisting of many memory qubits. This in turn will increase the complexity of the photonic circuits needed to control each qubit and will require strategies to multiplex memories and overcome the inhomogeneous distribution of their transition frequencies. Integrated photonics operating at visible to near-infrared (VNIR) wavelength range, compa…
▽ More
Practical quantum networks will require quantum nodes consisting of many memory qubits. This in turn will increase the complexity of the photonic circuits needed to control each qubit and will require strategies to multiplex memories and overcome the inhomogeneous distribution of their transition frequencies. Integrated photonics operating at visible to near-infrared (VNIR) wavelength range, compatible with the transition frequencies of leading quantum memory systems, can provide solutions to these needs. In this work, we realize a VNIR thin-film lithium niobate (TFLN) integrated photonics platform with the key components to meet these requirements. These include low-loss couplers ($<$ 1 dB/facet), switches ($>$ 20 dB extinction), and high-bandwidth electro-optic modulators ($>$ 50 GHz). With these devices we demonstrate high-efficiency and CW-compatible frequency shifting ($>$ 50 $\%$ efficiency at 15 GHz), as well as simultaneous laser amplitude and frequency control through a nested modulator structure. Finally, we highlight an architecture for multiplexing quantum memories using the demonstrated TFLN components, and outline how this platform can enable a 2-order of magnitude improvement in entanglement rates over single memory nodes. Our results demonstrate that TFLN can meet the necessary performance and scalability benchmarks to enable large-scale quantum nodes.
△ Less
Submitted 6 May, 2024;
originally announced May 2024.
-
Wavelength-accurate and wafer-scale process for nonlinear frequency mixers in thin-film lithium niobate
Authors:
C. J. Xin,
Shengyuan Lu,
Jiayu Yang,
Amirhassan Shams-Ansari,
Boris Desiatov,
Letícia S. Magalhães,
Soumya S. Ghosh,
Erin McGee,
Dylan Renaud,
Nicholas Achuthan,
Arseniy Zvyagintsev,
David Barton III,
Neil Sinclair,
Marko Lončar
Abstract:
Recent advancements in thin-film lithium niobate (TFLN) photonics have led to a new generation of high-performance electro-optic devices, including modulators, frequency combs, and microwave-to-optical transducers. However, the broader adoption of TFLN-based devices that rely on all-optical nonlinearities have been limited by the sensitivity of quasi-phase matching (QPM), realized via ferroelectri…
▽ More
Recent advancements in thin-film lithium niobate (TFLN) photonics have led to a new generation of high-performance electro-optic devices, including modulators, frequency combs, and microwave-to-optical transducers. However, the broader adoption of TFLN-based devices that rely on all-optical nonlinearities have been limited by the sensitivity of quasi-phase matching (QPM), realized via ferroelectric poling, to fabrication tolerances. Here, we propose a scalable fabrication process aimed at improving the wavelength-accuracy of optical frequency mixers in TFLN. In contrast to the conventional pole-before-etch approach, we first define the waveguide in TFLN and then perform ferroelectric poling. This sequence allows for precise metrology before and after waveguide definition to fully capture the geometry imperfections. Systematic errors can also be calibrated by measuring a subset of devices to fine-tune the QPM design for remaining devices on the wafer. Using this method, we fabricated a large number of second harmonic generation devices aimed at generating 737 nm light, with 73% operating within 5 nm of the target wavelength. Furthermore, we also demonstrate thermo-optic tuning and trimming of the devices via cladding deposition, with the former bringing ~96% of tested devices to the target wavelength. Our technique enables the rapid growth of integrated quantum frequency converters, photon pair sources, and optical parametric amplifiers, thus facilitating the integration of TFLN-based nonlinear frequency mixers into more complex and functional photonic systems.
△ Less
Submitted 18 April, 2024;
originally announced April 2024.
-
Integrated electro-optics on thin-film lithium niobate
Authors:
Yaowen Hu,
Di Zhu,
Shengyuan Lu,
Xinrui Zhu,
Yunxiang Song,
Dylan Renaud,
Daniel Assumpcao,
Rebecca Cheng,
CJ Xin,
Matthew Yeh,
Hana Warner,
Xiangwen Guo,
Amirhassan Shams-Ansari,
David Barton,
Neil Sinclair,
Marko Loncar
Abstract:
Electro-optics serves as the crucial bridge between electronics and photonics, unlocking a wide array of applications ranging from communications and computing to sensing and quantum information. Integrated electro-optics approaches in particular enable essential electronic high-speed control for photonics while offering substantial photonic parallelism for electronics. Recent strides in thin-film…
▽ More
Electro-optics serves as the crucial bridge between electronics and photonics, unlocking a wide array of applications ranging from communications and computing to sensing and quantum information. Integrated electro-optics approaches in particular enable essential electronic high-speed control for photonics while offering substantial photonic parallelism for electronics. Recent strides in thin-film lithium niobate photonics have ushered revolutionary advancements in electro-optics. This technology not only offers the requisite strong electro-optic coupling but also boasts ultra-low optical loss and high microwave bandwidth. Further, its tight confinement and compatibility with nanofabrication allow for unprecedented reconfigurability and scalability, facilitating the creation of novel and intricate devices and systems that were once deemed nearly impossible in bulk systems. Building upon this platform, the field has witnessed the emergence of various groundbreaking electro-optic devices surpassing the current state of the art, and introducing functionalities that were previously non-existent. This technological leap forward provides a unique framework to explore various realms of physics as well, including photonic non-Hermitian synthetic dimensions, active topological physics, and quantum electro-optics. In this review, we present the fundamental principles of electro-optics, drawing connections between fundamental science and the forefront of technology. We discuss the accomplishments and future prospects of integrated electro-optics, enabled by thin-film lithium niobate platform.
△ Less
Submitted 11 April, 2024; v1 submitted 9 April, 2024;
originally announced April 2024.
-
Femtosecond Pulse Generation via an Integrated Electro-Optic Time Lens
Authors:
Mengjie Yu,
Christian Reimer,
David Barton,
Prashanta Kharel,
Rebecca Cheng,
Lingyan He,
Linbo Shao,
Di Zhu,
Yaowen Hu,
Hannah R. Grant,
Leif Johansson,
Yoshitomo Okawachi,
Alexander L. Gaeta,
Mian Zhang,
Marko Lončar
Abstract:
Integrated femtosecond pulse and frequency comb sources are critical components for a wide range of applications. The leading approaches for on-chip pulse generation rely on mode locking inside microresonator with either third-order nonlinearity or with semiconductor gain. These approaches, however, are limited in noise performance, wavelength tunability and repetition rates. Alternatively, sub-pi…
▽ More
Integrated femtosecond pulse and frequency comb sources are critical components for a wide range of applications. The leading approaches for on-chip pulse generation rely on mode locking inside microresonator with either third-order nonlinearity or with semiconductor gain. These approaches, however, are limited in noise performance, wavelength tunability and repetition rates. Alternatively, sub-picosecond pulses can be synthesized without mode-locking, by modulating a continuous-wave (CW) single-frequency laser using a cascade of electro-optic (EO) modulators. This method is particularly attractive due to its simplicity, robustness, and frequency-agility but has been realized only on a tabletop using multiple discrete EO modulators and requiring optical amplifiers (to overcome large insertion losses), microwave amplifiers, and phase shifters. Here we demonstrate a chip-scale femtosecond pulse source implemented on an integrated lithium niobate (LN) photonic platform18, using cascaded low-loss electro-optic amplitude and phase modulators and chirped Bragg grating, forming a time-lens system. The device is driven by a CW distributed feedback (DFB) chip laser and controlled by a single CW microwave source without the need for any stabilization or locking. We measure femtosecond pulse trains (520 fs duration) with a 30-GHz repetition rate, flat-top optical spectra with a 10-dB optical bandwidth of 12.6 nm, individual comb-line powers above 0.1 milliwatt, and pulse energies of 0.54 picojoule. Our results represent a tunable, robust and low-cost integrated pulsed light source with CW-to-pulse conversion efficiencies an order of magnitude higher than achieved with previous integrated sources. Our pulse generator can find applications from ultrafast optical measurement to networks of distributed quantum computers.
△ Less
Submitted 16 December, 2021;
originally announced December 2021.
-
High quality factor silicon-on-lithium niobate metasurfaces for electro-optically reconfigurable wavefront sha**
Authors:
Elissa Klopfer,
Sahil Dagli,
David Barton III,
Mark Lawrence,
Jennifer A. Dionne
Abstract:
Dynamically reconfigurable metasurfaces promise compact and lightweight spatial light modulation for many applications, including LiDAR, AR/VR, and LiFi systems. Here, we design and computationally investigate high quality factor silicon-on-lithium niobate metasurfaces with electrically-driven, independent control of its constituent nanobars for full phase tunability with high tuning efficiency. F…
▽ More
Dynamically reconfigurable metasurfaces promise compact and lightweight spatial light modulation for many applications, including LiDAR, AR/VR, and LiFi systems. Here, we design and computationally investigate high quality factor silicon-on-lithium niobate metasurfaces with electrically-driven, independent control of its constituent nanobars for full phase tunability with high tuning efficiency. Free-space light couples to guided modes within each nanobar via periodic perturbations, generating quality factors exceeding 30,000, while maintaining bar spacing <$λ$/1.5. We achieve nearly 2$π$ phase variation with an applied bias not exceeding $\pm$ 25 V, maintaining reflection efficiency above 91%. Using full-field simulations, we demonstrate a high angle, 51°, switchable beamsplitter with a diffracted efficiency of 93%, and an angle-tunable beamsteerer, spanning 18-31°, with up to 86% efficiency, all using the same metasurface device. Our platform provides a foundation for highly efficient wavefront sha** devices with a wide dynamic tuning range capable of generating nearly any transfer function.
△ Less
Submitted 24 March, 2022; v1 submitted 8 October, 2021;
originally announced October 2021.
-
Reduced-order modelling of flutter oscillations using normal forms and scientific machine learning
Authors:
K. H. Lee,
D. A. W. Barton,
L. Renson
Abstract:
This paper introduces a machine learning approach to take a nonlinear differential-equation model that exhibits qualitative agreement with a physical experiment over a range of parameter values and produce a hybrid model that also exhibits quantitative agreement. The underpinning idea is that the bifurcation experiment structure of an experiment can be revealed using techniques such as control-bas…
▽ More
This paper introduces a machine learning approach to take a nonlinear differential-equation model that exhibits qualitative agreement with a physical experiment over a range of parameter values and produce a hybrid model that also exhibits quantitative agreement. The underpinning idea is that the bifurcation experiment structure of an experiment can be revealed using techniques such as control-based continuation and then used to generate a simplified normal-form-like model. A machine learning approach is then used to learn a coordinate transform from the normal-form-like model to the physical coordinates of the experiment. This approach is demonstrated on a mathematical model of aero-elastic flutter, where good agreement at the level of the bifurcation diagrams is shown between the hybrid model and the underlying ground truth. Moreover, individual phase portraits and time series are also reproduced accurately, even in regions away from training data. As such, the approach holds significant promise for producing quantitatively accurate models that exhibit the correct nonlinear behaviour over a range of parameter values.
△ Less
Submitted 23 August, 2022; v1 submitted 3 November, 2020;
originally announced November 2020.
-
Interactions between Large Molecules: Puzzle for Reference Quantum-Mechanical Methods
Authors:
Yasmine S. Al-Hamdani,
Péter R. Nagy,
Dennis Barton,
Mihály Kállay,
Jan Gerit Brandenburg,
Alexandre Tkatchenko
Abstract:
Quantum-mechanical methods are widely used for understanding molecular interactions throughout biology, chemistry, and materials science. Quantum diffusion Monte Carlo (DMC) and coupled cluster with single, double, and perturbative triple excitations [CCSD(T)] are two state-of-the-art and trusted wavefunction methods that have been categorically shown to yield accurate interaction energies for sma…
▽ More
Quantum-mechanical methods are widely used for understanding molecular interactions throughout biology, chemistry, and materials science. Quantum diffusion Monte Carlo (DMC) and coupled cluster with single, double, and perturbative triple excitations [CCSD(T)] are two state-of-the-art and trusted wavefunction methods that have been categorically shown to yield accurate interaction energies for small organic molecules. These methods provide valuable reference information for widely-used semi-empirical and machine learning potentials, especially where experimental information is scarce. However, agreement for systems beyond small molecules is a crucial remaining milestone for cementing the benchmark accuracy of these methods. Approaching such well-converged predictive power in larger molecules has motivated major developments in CCSD(T) as well as DMC algorithms in the past years, resulting in orders of magnitude time-to-solution reductions. Here, we show that CCSD(T) and DMC interaction energies are not in consistent agreement for a set of polarizable supramolecules. Whilst agreement is found for some of the complexes, in a few key systems disagreements of up to 8 kcal/mol remained. This leads to differences of up to 6 orders of magnitude in the corresponding binding association constant at room temperature for systems which are well within the accustomed domain of applicability for both methods. These findings thus indicate that more caution is required when aiming at reproducible non-covalent interactions between extended molecules. Our data contradicts the expectation that the most comprehensive and robust wavefunction methods predict identical non-covalent interactions and indicate an unsolved challenge for benchmark approaches.
△ Less
Submitted 18 September, 2020;
originally announced September 2020.
-
Ultra-low do** and local charge variation in graphene measured by Raman: experiment and simulation
Authors:
Zhuofa Chen,
Nathan Ullberg,
Mounika Vutukuru,
David Barton,
Anna K Swan
Abstract:
Avoiding charge density variations and impurities in graphene is vital for high-quality graphene-based devices. Here, we demonstrate an optical method using Raman 2D peak-split to monitor charge density variations in the range 1-25e10 cm-2. We compare Raman signatures with electrostatically gated Raman and transport measurements to correlate the 2D peak-split with the charge density on graphene wi…
▽ More
Avoiding charge density variations and impurities in graphene is vital for high-quality graphene-based devices. Here, we demonstrate an optical method using Raman 2D peak-split to monitor charge density variations in the range 1-25e10 cm-2. We compare Raman signatures with electrostatically gated Raman and transport measurements to correlate the 2D peak-split with the charge density on graphene with high precision. We found that the Raman 2D peak-split and peak areas linearly varies with the charge density, where a lower charge density results in a larger 2D peak-split. We simulate Raman 2D spectra under various do** conditions to study the correlation between Raman 2D peak and charge puddles. These simulations give qualitative agreement with experimental results. Our work provides a simple and non-invasive optical method for estimating the do** level, local charge density variation and transport properties of graphene before fabricating graphene devices, with up to two orders of magnitude higher precision than previously reported optical methods.
△ Less
Submitted 8 May, 2020;
originally announced May 2020.
-
Monitoring the low do** regime in graphene using Raman 2D peak-splits: Comparison of gated Raman and transport measurements
Authors:
Zhuofa Chen,
Nathan Ullberg,
Mounika Vutukuru,
David Barton,
Anna K Swan
Abstract:
Avoiding charge density fluctuations and impurities in graphene is vital for high-quality graphene-based devices. Traditional characterization methods require device fabrication and electrical transport measurements, which are labor-intensive and time-consuming. Existing optical methods using Raman spectroscopy only work for do** levels higher than ~10^12 cm^-2. Here, we propose an optical metho…
▽ More
Avoiding charge density fluctuations and impurities in graphene is vital for high-quality graphene-based devices. Traditional characterization methods require device fabrication and electrical transport measurements, which are labor-intensive and time-consuming. Existing optical methods using Raman spectroscopy only work for do** levels higher than ~10^12 cm^-2. Here, we propose an optical method using Raman 2D peak-splitting (split between the Raman 2D1 and 2D2 peaks at low do** levels). Electrostatically gated Raman measurements combined with transport measurements were used to correlate the 2D peak-split with the charge density on graphene with high precision (2x10^10 cm^-2 per 2D peak-split wavenumber). We found that the Raman 2D peak-split has a strong correlation with the charge density at low do** levels, and that a lower charge density results in a larger 2D peak-split. Our work provides a simple and non-invasive optical method to quantify the do** level of graphene from 10^10 cm^-2 to 10^12 cm^-2, two orders of magnitude higher precision than previously reported optical methods. This method provides a platform for estimating the do** level and quality of graphene before fabricating graphene devices
△ Less
Submitted 28 August, 2019;
originally announced August 2019.
-
Application of control-based continuation to a nonlinear structure with harmonically coupled modes
Authors:
L. Renson,
A. D. Shaw,
D. A. W. Barton,
S. A. Neild
Abstract:
This paper presents a systematic method for exploring the nonlinear dynamics of multi-degree-of-freedom (MDOF) physical experiments. To illustrate the power of this method, known as control-based continuation (CBC), it is applied to a nonlinear beam structure that exhibits a strong 3:1 modal coupling between its first two bending modes. CBC is able to extract a range of dynamical features, includi…
▽ More
This paper presents a systematic method for exploring the nonlinear dynamics of multi-degree-of-freedom (MDOF) physical experiments. To illustrate the power of this method, known as control-based continuation (CBC), it is applied to a nonlinear beam structure that exhibits a strong 3:1 modal coupling between its first two bending modes. CBC is able to extract a range of dynamical features, including an isola, directly from the experiment without recourse to model fitting or other indirect data-processing methods.
Previously, CBC has only been applied to (essentially) single-degree-of-freedom experiments; in this paper we show that the required feedback-control methods and path-following techniques can equally be applied to MDOF systems. A low-level broadband excitation is initially applied to the experiment to obtain the requisite information for controller design and, subsequently, the physical experiment is treated as a `black box' that is probed using CBC. The invasiveness of the controller used is analysed and experimental results are validated with open-loop measurements. Good agreement between open- and closed-loop results is achieved, though it is found that care needs to be taken in dealing with the presence of higher-harmonics in the force applied to the structure.
△ Less
Submitted 12 July, 2018;
originally announced August 2018.
-
Broadband and Wide-Angle Nonreciprocity with a Nonhermitian Metamaterial
Authors:
David Barton III,
Mark Lawrence,
Hadiseh Alaeian,
Jennifer Dionne
Abstract:
We theoretically demonstrate a non-hermitian metamaterial exhibiting broadband and wide-angle nonreciprocity. The metamaterial consists of planar metal-dielectric layers with a Parity-Time (PT) symmetric distrubtion of loss and gain. With increasing loss and gain, the bandstructure and bandgap are strongly modified; further, the PT potential leads to distinct internal field distributions when illu…
▽ More
We theoretically demonstrate a non-hermitian metamaterial exhibiting broadband and wide-angle nonreciprocity. The metamaterial consists of planar metal-dielectric layers with a Parity-Time (PT) symmetric distrubtion of loss and gain. With increasing loss and gain, the bandstructure and bandgap are strongly modified; further, the PT potential leads to distinct internal field distributions when illuminated from different sides. Including nonlinearities arising from natural loss and gain saturation leads to nonreciprocal transmission in the visible over a 50 nm wavelength and 60$^{\circ}$ degree angular range.
△ Less
Submitted 14 December, 2017;
originally announced December 2017.
-
Active Polarization Control with a Parity-Time Symmetric Plasmonic Resonator
Authors:
Brian Baum,
Mark Lawrence,
David Barton,
Hadiseh Alaeian,
Jennifer Dionne
Abstract:
Control of the polarization state of light is essential for many technologies, but is often limited by weak light-matter interactions that necessitate long device path lengths or significantly reduce the signal intensity. Here, we investigate a nanoscale plasmonic aperture capable of modifying the polarization state of far-field transmitted light without loss in the probe signal. The aperture is a…
▽ More
Control of the polarization state of light is essential for many technologies, but is often limited by weak light-matter interactions that necessitate long device path lengths or significantly reduce the signal intensity. Here, we investigate a nanoscale plasmonic aperture capable of modifying the polarization state of far-field transmitted light without loss in the probe signal. The aperture is a coaxial resonator consisting of a dielectric ring embedded within a metallic film; parity-time ($\mathcal{PT}$) symmetric inclusions of loss and gain within the dielectric ring enable polarization control. Since the coaxial aperture enables near-thresholdless $\mathcal{PT}$ symmetry breaking, polarization control is achieved with realistic levels of loss and gain. Exploiting this sensitivity, we show that the aperture can function as a tunable waveplate, with the transmitted ellipticity of circularly polarized incident light changing continuously with the dissipation coefficient from $π/2$ to 0 (i.e. linear polarization). Rotation of linearly polarized light with unity efficiency is also possible, with a continuously-tunable degree of rotation. This compact, low-threshold, and reconfigurable polarizer may enable next-generation, high-efficiency displays, routers, modulators, and metasurfaces.
△ Less
Submitted 17 May, 2018; v1 submitted 14 December, 2017;
originally announced December 2017.
-
Active Vertex Model for Cell-Resolution Description of Epithelial Tissue Mechanics
Authors:
Daniel L. Barton,
Silke Henkes,
Cornelis J. Weijer,
Rastko Sknepnek
Abstract:
We introduce an Active Vertex Model (AVM) for cell-resolution studies of the mechanics of confluent epithelial tissues consisting of tens of thousands of cells, with a level of detail inaccessible to similar methods. The AVM combines the Vertex Model for confluent epithelial tissues with active matter dynamics. This introduces a natural description of the cell motion and accounts for motion patter…
▽ More
We introduce an Active Vertex Model (AVM) for cell-resolution studies of the mechanics of confluent epithelial tissues consisting of tens of thousands of cells, with a level of detail inaccessible to similar methods. The AVM combines the Vertex Model for confluent epithelial tissues with active matter dynamics. This introduces a natural description of the cell motion and accounts for motion patterns observed on multiple scales. Furthermore, cell contacts are generated dynamically from positions of cell centres. This not only enables efficient numerical implementation, but provides a natural description of the T1 transition events responsible for local tissue rearrangements. The AVM also includes cell alignment, cell-specific mechanical properties, cell growth, division and apoptosis. In addition, the AVM introduces a flexible, dynamically changing boundary of the epithelial sheet allowing for studies of phenomena such as the fingering instability or wound healing. We illustrate these capabilities with a number of case studies.
△ Less
Submitted 18 December, 2016;
originally announced December 2016.
-
Analytical Modelling of the Spread of Disease in Confined and Crowded Spaces
Authors:
Lara Goscé,
David A W Barton,
Anders Johansson
Abstract:
Since 1927, until recently, models describing the spread of disease have mostly been of the SIR-compartmental type, based on the assumption that populations are homogeneous and well-mixed. The focus of these models have typically been on large-scale analysis of scenarios such as cities, nations or even world scale. SIR models are appealing because of their simplicity, but their parameters, especia…
▽ More
Since 1927, until recently, models describing the spread of disease have mostly been of the SIR-compartmental type, based on the assumption that populations are homogeneous and well-mixed. The focus of these models have typically been on large-scale analysis of scenarios such as cities, nations or even world scale. SIR models are appealing because of their simplicity, but their parameters, especially the transmission rate, are complex and depend on a number of factors, which makes it hard to predict how a change of a single environmental, demographic, or epidemiological factor will affect the population. Therefore, in this contribution we start to unpick the transmission-rate parameter. Analysing the implications that arise when taking crowd behaviour explicitly into account, we show how both the rate of infection as well as the walking speed depend on the local crowd density around an infected individual. The combined effect is that the rate of infection at a population scale has an analytically tractable non-linear dependency on crowd density. We model the spread of a hypothetical disease in a corridor and compare our new model with a typical compartmental model, which highlights the regime in which current models may not produce credible results.
△ Less
Submitted 21 July, 2014; v1 submitted 15 August, 2013;
originally announced August 2013.
-
A benign, low Z electron capture agent for negative ion TPCs
Authors:
C. J. Martoff,
M. P. Dion,
M. Hosack,
D. Barton,
J. K. Black
Abstract:
We have identified nitromethane (CH$_3$NO$_2$) as an effective electron capture agent for negative ion TPCs (NITPCs).
We present drift velocity and longitudinal diffusion measurements for negative ion gas mixtures using nitromethane as the capture agent.
Not only is nitromethane substantially more benign than the only other identified capture agent, CS$_2$, but its low atomic number will ena…
▽ More
We have identified nitromethane (CH$_3$NO$_2$) as an effective electron capture agent for negative ion TPCs (NITPCs).
We present drift velocity and longitudinal diffusion measurements for negative ion gas mixtures using nitromethane as the capture agent.
Not only is nitromethane substantially more benign than the only other identified capture agent, CS$_2$, but its low atomic number will enable the use of the NITPC as a photoelectric X{}-ray polarimeter in the 1{}-10 keV band.
△ Less
Submitted 20 August, 2009;
originally announced August 2009.