Showing 1–18 of 18 results for author: Barnaföldi, G G

Characterisation of plastic scintillator paddles and lightweight MWPCs for the MID subsystem of ALICE 3

Authors: Ruben Alfaro, Mauricio Alvarado Hernández, Gyula Bencédi, Juan Carlos Cabanillas Noris, Marco Antonio Díaz Maldonado, Carlos Duarte Galvan, Arturo Fernández Téllez, Gergely Gábor Barnaföldi, Ádám Gera, Varlen Grabsky, Gergő Hamar, Gerardo Herrera Corral, Ildefonso León Monzón, Josué Martínez García, Mario Iván Martínez Hernandez, Jesús Eduardo Muñoz Méndez, Richárd Nagy, Rafael Ángel Narcio Laveaga, Antonio Ortiz, Mario Rodríguez Cahuantzi, Solangel Rojas Torres, Timea Szollosova, Miguel Enrique Patiño Salazar, Jared Pazarán García, Hector David Regules Medel , et al. (7 additional authors not shown)

Abstract: The ALICE collaboration is proposing a completely new detector, ALICE 3, for operation during the LHC Runs 5 and 6. One of the ALICE~3 subsystems is the Muon IDentifier detector (MID), which has to be optimised to be efficient for the reconstruction of $J/ψ$ at rest (muons down to $p_{\rm T}\approx1.5$ GeV/$c$) for $|η|<1.3$. Given the modest particle flux expected in the MID of a few Hz/cm$^2$, t… ▽ More The ALICE collaboration is proposing a completely new detector, ALICE 3, for operation during the LHC Runs 5 and 6. One of the ALICE~3 subsystems is the Muon IDentifier detector (MID), which has to be optimised to be efficient for the reconstruction of $J/ψ$ at rest (muons down to $p_{\rm T}\approx1.5$ GeV/$c$) for $|η|<1.3$. Given the modest particle flux expected in the MID of a few Hz/cm$^2$, technologies like plastic scintillator bars ($\approx1$ m length) equipped with wavelength-shifting fibers and silicon photomultiplier readout, and lightweight Multi-Wire Proportional Chambers (MWPCs) are under investigation. To this end, different plastic scintillator paddles and MWPCs were studied at the CERN T10 test beam facility. This paper reports on the performance of the scintillator prototypes tested at different beam momenta (from 0.5 GeV/$c$ up to 6 GeV/$c$) and positions (horizontal, vertical, and angular scans). The MWPCs were tested at different momenta (from 0.5 GeV/$c$ to 10 GeV/$c$) and beam intensities, their efficiency and position resolutions were verified beyond the particle rates expected with the MID in ALICE 3. △ Less

Submitted 16 February, 2024; v1 submitted 9 January, 2024; originally announced January 2024.

Comments: 11 pages, 8 figures, to appear in JINST

Journal ref: JINST 19 (2024) T04006

3D Muographic Inversion in the Exploration of Cavities and Low-density Fractured Zones

Authors: László Balázs, Gábor Nyitrai, Gergely Surányi, Gergő Hamar, Gergely Gábor Barnaföldi, Dezső Varga

Abstract: Muography is an imaging tool based on the attenuation of cosmic muons to observe the density distribution of large objects, such as underground caves or fractured zones. Tomography based on muography measurements -- that is, three dimensional reconstruction of density distribution from two dimensional muon flux maps -- brings up special challenges. The detector field of view covering must be as ba… ▽ More Muography is an imaging tool based on the attenuation of cosmic muons to observe the density distribution of large objects, such as underground caves or fractured zones. Tomography based on muography measurements -- that is, three dimensional reconstruction of density distribution from two dimensional muon flux maps -- brings up special challenges. The detector field of view covering must be as balanced as possible, considering the muon flux drop at higher zenith angles and the detector placement possibilities. The inversion from directional muon fluxes to 3D density map is usually underdetermined (more voxels than measurements) which can be unstable due to partial coverage. This can be solved by geologically relevant Bayesian constraints. The Bayesian principle results in parameter bias and artifacts. In this work, the linearized (density-length based) inversion is applied, the methodology is explained, formulating the constraints associated with inversion to ensure the stability of parameter fitting. After testing the procedure on synthetic examples, an actual high quality muography measurement data set from 7 positions is used as input for the inversion. The result demonstrates the tomographic imaging of a complex karstic crack zone and provides details on the complicated internal structures. The existence of low density zones in the imaged space was verified by samples from core drills, which consist altered dolomite powder within the intact high density dolomite. △ Less

Submitted 21 September, 2023; originally announced September 2023.

Comments: submitted to Geophys. J. Int

Dedicated Analysis Facility for HEP Experiments

Authors: Gábor Bíró, Gergely Gábor Barnaföldi, Péter Lévai

Abstract: High-energy physics (HEP) provides ever-growing amount of data. To analyse these, continuously-evolving computational power is required in parallel by extending the storage capacity. Such developments play key roles in the future of this field however, these can be achieved also by optimization of existing IT resources. One of the main computing capacity consumers in the HEP software workflow ar… ▽ More High-energy physics (HEP) provides ever-growing amount of data. To analyse these, continuously-evolving computational power is required in parallel by extending the storage capacity. Such developments play key roles in the future of this field however, these can be achieved also by optimization of existing IT resources. One of the main computing capacity consumers in the HEP software workflow are detector simulation and data analysis. To optimize the resource requirements for these aims, the concept of a dedicated Analysis Facility (AF) for Run 3 has been suggested by the ALICE experiment at CERN. These AFs are special computing centres with a combination of CPU and fast interconnected disk storage modules, allowing for rapid turnaround of analysis tasks on a dedicated subset of data. This in turn allows for optimization of the analysis process and the codes before the analysis is performed on the large data samples on the Worldwide LHC Computing Grid. In this paper, the structure and the progress summary of the Wigner Analysis Facility (Wigner AF) is presented for the period 2020-2022. △ Less

Submitted 9 March, 2023; originally announced March 2023.

Comments: Contribution to the 21st International Workshop on Advanced Computing and Analysis Techniques in Physics Research, 23-28 October, 2022, Bari, Italy

The Formulation of Scaling Expansion in an Euler-Poisson Dark-fluid Model

Authors: Balázs Endre Szigeti, Imre Ferenc Barna, Gergely Gábor Barnaföldi

Abstract: We present a dark fluid model described as a non-viscous, non-relativistic, rotating, and self-gravitating fluid. We assumed that the system has spherical symmetry and the matter can be described with the polytropic equation of state. The induced coupled non-linear partial differential equation system was solved by using a self-similar time-dependent ansatz introduced by L. Sedov and G. I. Taylor.… ▽ More We present a dark fluid model described as a non-viscous, non-relativistic, rotating, and self-gravitating fluid. We assumed that the system has spherical symmetry and the matter can be described with the polytropic equation of state. The induced coupled non-linear partial differential equation system was solved by using a self-similar time-dependent ansatz introduced by L. Sedov and G. I. Taylor. These kinds of solutions were successfully used to describe blast waves induced by an explosion since the Guderley-Landau-Stanyukovich problem. We showed that these kinds of solutions can provide new solutions that are consistent with the Newtonian cosmological framework. We have found that such solutions can be applied to describe normal-to-dark energy on the cosmological scale. △ Less

Submitted 4 October, 2023; v1 submitted 7 March, 2023; originally announced March 2023.

Comments: 16 page, 8 figures

Journal ref: Universe 2023, 9(10), 431

Proton Computed Tomography Based on Richardson-Lucy Algorithm

Authors: Ákos Sudár, Gergely Gábor Barnaföldi

Abstract: Objective: Proton therapy is a emerging method against cancer. One of the main development is to increase the accuracy of the Bragg-peak position calculation, which requires more precise relative stop** power (RSP) measurements. An excellent choice is the application of proton computed tomography (pCT) systems which take the images under similar conditions to treatment as they use the same irrad… ▽ More Objective: Proton therapy is a emerging method against cancer. One of the main development is to increase the accuracy of the Bragg-peak position calculation, which requires more precise relative stop** power (RSP) measurements. An excellent choice is the application of proton computed tomography (pCT) systems which take the images under similar conditions to treatment as they use the same irradiation device and hadron beam for imaging and treatment. A key aim is to develop an accurate image reconstruction algorithm for pCT systems to reach their maximal performance. Approach: An image reconstruction algorithm was developed in this work, which is suitable to reconstruct pCT images from the energy, position and direction measurement of individual protons. The flexibility of an iterative image reconstruction algorithm was utilised to appropriately model the trajectory of protons. Monte Carlo (MC) simulations of a Derenzo and a CTP404 phantom was used to test the accuracy of the image reconstruction. Main results: The Richardson-Lucy algorithm was applied first and successfully for pCT image reconstruction. Probability density based approach was applied for interaction (system) matrix generation, which is an advanced approach to consider the uncertain path of the protons in the patient. Significance: The track of protons are scattered when they travel through material at the hadron therapy energies. This property limits the achievable spatial resolution, especially for single-sided pCT setups investigated in this study. The main motivation of the presented research is to test new approaches for the image reconstruction, focusing on the achieved spatial- and density resolution and the image noise. Realistic imaging setup were simulated with reasonably low proton statistics, to achieve results, which is likely to be reproducible in clinical environment. △ Less

Submitted 30 November, 2022; originally announced December 2022.

Testing of KNO-scaling of charged hadron multiplicities within a Machine Learning based approach

Authors: Gábor Bíró, Bence Tankó-Bartalis, Gergely Gábor Barnaföldi

Abstract: The results of a Machine Learning-based method is presented here to investigate the scaling properties of the final state charged hadron and mean jet multiplicity distributions. Deep residual neural network architectures with different complexities are utilized to predict the final state multiplicity distribution from the parton-level final state, generated by the \textsc{Pythia} Monte Carlo event… ▽ More The results of a Machine Learning-based method is presented here to investigate the scaling properties of the final state charged hadron and mean jet multiplicity distributions. Deep residual neural network architectures with different complexities are utilized to predict the final state multiplicity distribution from the parton-level final state, generated by the \textsc{Pythia} Monte Carlo event generator. Hadronization networks were trained by $\sqrt{s}=7$ TeV events, while predictions have been made for various LHC energies from $\sqrt{s}=0.9$ TeV to 13 TeV. Scaling properties were adopted by the networks at hadronic level, indeed KNO-scaling is preserved -- although, the scaling of the mean jet multiplicity distributions varies for the applied models. △ Less

Submitted 19 October, 2022; originally announced October 2022.

Comments: Contribution to the 41th International Conference on High Energy Physics, 6-13 July, 2022, Bologna, Italy

Challenges in the thermal modeling of highly porous carbon foams

Authors: Anna Fehér, Róbert Kovács, Ákos Sudár, Gergely Gábor Barnaföldi

Abstract: The heat pulse experiment is a well-known method for determining thermal diffusivity. However, neither the measurement nor the evaluation methodologies are straightforward for heterogeneous, highly porous materials. In the present paper, we focus on two open-cell carbon foam types, differing in their porosity but having the same size. Recent experiments showed that a non-Fourier behaviour, called… ▽ More The heat pulse experiment is a well-known method for determining thermal diffusivity. However, neither the measurement nor the evaluation methodologies are straightforward for heterogeneous, highly porous materials. In the present paper, we focus on two open-cell carbon foam types, differing in their porosity but having the same size. Recent experiments showed that a non-Fourier behaviour, called 'over-diffusive' propagation, is probably present for such a complex structure. The (continuum) Guyer-Krumhansl equation stands as a promising candidate to model such transient thermal behaviour. In order to obtain a reliable evaluation and thus reliable thermal parameters, we utilize a novel, state-of-the-art evaluation procedure developed recently using an analytical solution of the Guyer-Krumhansl equation. Based on our observations, it turned out that the presence of high porosity alone is necessary but not satisfactory for non-Fourier behaviour. Additionally, the mentioned non-Fourier effects are porosity-dependent. However, porous samples can also follow the Fourier law. These data serve as a basis to correctly identify the characteristic heat transfer mechanisms and their corresponding time scales, which altogether result in the present non-Fourier behaviour. Keywords: flash experiments, non-Fourier heat conduction, highly porous carbon foams. △ Less

Submitted 17 August, 2023; v1 submitted 20 September, 2022; originally announced September 2022.

Report on a pre-earthquake signal detection by enhanced Eötvös torsion balance

Authors: L. Völgyesi, Gy. Tóth, Gy. Szondy, B. Kiss, E. Fenyvesi, G. G. Barnaföldi, Cs. Égető, P. Lévai, E. Imre, M. Pszota, P. Ván

Abstract: More than 30 minutes before the earthquake event in Florina, Greece at 21:43:47(UTC) on 9th January 2022 an enhanced Eötvös torsion balance registered unidentified signals in the Jánossy Underground Research Laboratory in Budapest, Hungary. These signals were not visible on the seismograms, although seismic noises are continuously recorded by a side-by-side broadband seismometer. Moreover, seismol… ▽ More More than 30 minutes before the earthquake event in Florina, Greece at 21:43:47(UTC) on 9th January 2022 an enhanced Eötvös torsion balance registered unidentified signals in the Jánossy Underground Research Laboratory in Budapest, Hungary. These signals were not visible on the seismograms, although seismic noises are continuously recorded by a side-by-side broadband seismometer. Moreover, seismological stations did not detect anything unusual, they presented a negative confirmation of the events. Our observation suggests that torsion balances might effectively detect precursory earthquake signals from a considerable distance. Such a finding could trigger the development of new observational devices and networks and can provide novel knowledge about the origin and mechanism of earthquake phenomena. △ Less

Submitted 23 April, 2022; v1 submitted 19 February, 2022; originally announced February 2022.

Comments: 14 pages, 5+5 figures

Exploration of Differentiability in a Proton Computed Tomography Simulation Framework

Authors: Max Aehle, Johan Alme, Gergely Gábor Barnaföldi, Johannes Blühdorn, Tea Bodova, Vyacheslav Borshchov, Anthony van den Brink, Viljar Eikeland, Gregory Feofilov, Christoph Garth, Nicolas R. Gauger, Ola Grøttvik, Håvard Helstrup, Sergey Igolkin, Ralf Keidel, Chinorat Kobdaj, Tobias Kortus, Lisa Kusch, Viktor Leonhardt, Shruti Mehendale, Raju Ningappa Mulawade, Odd Harald Odland, George O'Neill, Gábor Papp, Thomas Peitzmann , et al. (25 additional authors not shown)

Abstract: Objective. Algorithmic differentiation (AD) can be a useful technique to numerically optimize design and algorithmic parameters by, and quantify uncertainties in, computer simulations. However, the effectiveness of AD depends on how "well-linearizable" the software is. In this study, we assess how promising derivative information of a typical proton computed tomography (pCT) scan computer simulati… ▽ More Objective. Algorithmic differentiation (AD) can be a useful technique to numerically optimize design and algorithmic parameters by, and quantify uncertainties in, computer simulations. However, the effectiveness of AD depends on how "well-linearizable" the software is. In this study, we assess how promising derivative information of a typical proton computed tomography (pCT) scan computer simulation is for the aforementioned applications. Approach. This study is mainly based on numerical experiments, in which we repeatedly evaluate three representative computational steps with perturbed input values. We support our observations with a review of the algorithmic steps and arithmetic operations performed by the software, using debugging techniques. Main results. The model-based iterative reconstruction (MBIR) subprocedure (at the end of the software pipeline) and the Monte Carlo (MC) simulation (at the beginning) were piecewise differentiable. Jumps in the MBIR function arose from the discrete computation of the set of voxels intersected by a proton path. Jumps in the MC function likely arose from changes in the control flow that affect the amount of consumed random numbers. The tracking algorithm solves an inherently non-differentiable problem. Significance. The MC and MBIR codes are ready for the integration of AD, and further research on surrogate models for the tracking subprocedure is necessary. △ Less

Submitted 12 May, 2023; v1 submitted 11 February, 2022; originally announced February 2022.

Comments: 27 pages, 11 figures

The upgrade of the ALICE TPC with GEMs and continuous readout

Authors: J. Adolfsson, M. Ahmed, S. Aiola, J. Alme, T. Alt, W. Amend, F. Anastasopoulos, C. Andrei, M. Angelsmark, V. Anguelov, A. Anjam, H. Appelshäuser, V. Aprodu, O. Arnold, M. Arslandok, D. Baitinger, M. Ball, G. G. Barnaföldi, E. Bartsch, P. Becht, R. Bellwied, A. Berdnikova, M. Berger, N. Bialas, P. Bialas , et al. (210 additional authors not shown)

Abstract: The upgrade of the ALICE TPC will allow the experiment to cope with the high interaction rates foreseen for the forthcoming Run 3 and Run 4 at the CERN LHC. In this article, we describe the design of new readout chambers and front-end electronics, which are driven by the goals of the experiment. Gas Electron Multiplier (GEM) detectors arranged in stacks containing four GEMs each, and continuous re… ▽ More The upgrade of the ALICE TPC will allow the experiment to cope with the high interaction rates foreseen for the forthcoming Run 3 and Run 4 at the CERN LHC. In this article, we describe the design of new readout chambers and front-end electronics, which are driven by the goals of the experiment. Gas Electron Multiplier (GEM) detectors arranged in stacks containing four GEMs each, and continuous readout electronics based on the SAMPA chip, an ALICE development, are replacing the previous elements. The construction of these new elements, together with their associated quality control procedures, is explained in detail. Finally, the readout chamber and front-end electronics cards replacement, together with the commissioning of the detector prior to installation in the experimental cavern, are presented. After a nine-year period of R&D, construction, and assembly, the upgrade of the TPC was completed in 2020. △ Less

Submitted 25 March, 2021; v1 submitted 17 December, 2020; originally announced December 2020.

Comments: 88 pages, 60 figures

Journal ref: JINST 16 (2021) P03022

The muon intensity in the Felsenkeller shallow underground laboratory

Authors: F. Ludwig, L. Wagner, T. Al-Abdullah, G. G. Barnaföldi, D. Bemmerer, D. Degering, K. Schmidt, G. Surányi, T. Szücs, K. Zuber

Abstract: The muon intensity and angular distribution in the shallow-underground laboratory Felsenkeller in Dresden, Germany have been studied using a portable muon detector based on the close cathode chamber design. Data has been taken at four positions in Felsenkeller tunnels VIII and IX, where a new 5 MV underground ion accelerator is being installed, and in addition at four positions in Felsenkeller tun… ▽ More The muon intensity and angular distribution in the shallow-underground laboratory Felsenkeller in Dresden, Germany have been studied using a portable muon detector based on the close cathode chamber design. Data has been taken at four positions in Felsenkeller tunnels VIII and IX, where a new 5 MV underground ion accelerator is being installed, and in addition at four positions in Felsenkeller tunnel IV, which hosts a low-radioactivity counting facility. At each of the eight positions studied, seven different orientations of the detector were used to compile a map of the upper hemisphere with 0.85° angular resolution. The muon intensity is found to be suppressed by a factor of 40 due to the 45 m thick rock overburden, corresponding to 140 meters water equivalent. The angular data are matched by two different simulations taking into account the known geodetic features of the terrain: First, simply by determining the cutoff energy using the projected slant depth in rock and the known muon energy spectrum, and second, in a Geant4 simulation propagating the muons through a column of rock equal to the known slant depth. The present data are instrumental for studying muon-induced effects at these depths and also in the planning of an active veto for accelerator-based underground nuclear astrophysics experiments. △ Less

Submitted 25 April, 2019; originally announced April 2019.

Comments: Submitted to Astroparticle Physics

Journal ref: Astroparticle Physics 112 (2019) 24-34

A next-generation LHC heavy-ion experiment

Authors: D. Adamová, G. Aglieri Rinella, M. Agnello, Z. Ahammed, D. Aleksandrov, A. Alici, A. Alkin, T. Alt, I. Altsybeev, D. Andreou, A. Andronic, F. Antinori, P. Antonioli, H. Appelshäuser, R. Arnaldi, I. C. Arsene, M. Arslandok, R. Averbeck, M. D. Azmi, X. Bai, R. Bailhache, R. Bala, L. Barioglio, G. G. Barnaföldi, L. S. Barnby , et al. (374 additional authors not shown)

Abstract: The present document discusses plans for a compact, next-generation multi-purpose detector at the LHC as a follow-up to the present ALICE experiment. The aim is to build a nearly massless barrel detector consisting of truly cylindrical layers based on curved wafer-scale ultra-thin silicon sensors with MAPS technology, featuring an unprecedented low material budget of 0.05% X$_0$ per layer, with th… ▽ More The present document discusses plans for a compact, next-generation multi-purpose detector at the LHC as a follow-up to the present ALICE experiment. The aim is to build a nearly massless barrel detector consisting of truly cylindrical layers based on curved wafer-scale ultra-thin silicon sensors with MAPS technology, featuring an unprecedented low material budget of 0.05% X$_0$ per layer, with the innermost layers possibly positioned inside the beam pipe. In addition to superior tracking and vertexing capabilities over a wide momentum range down to a few tens of MeV/$c$, the detector will provide particle identification via time-of-flight determination with about 20~ps resolution. In addition, electron and photon identification will be performed in a separate shower detector. The proposed detector is conceived for studies of pp, pA and AA collisions at luminosities a factor of 20 to 50 times higher than possible with the upgraded ALICE detector, enabling a rich physics program ranging from measurements with electromagnetic probes at ultra-low transverse momenta to precision physics in the charm and beauty sector. △ Less

Submitted 2 May, 2019; v1 submitted 31 January, 2019; originally announced February 2019.

Comments: Input to the 2020 Update of the European Particle Physics Strategy

Introducing HIJING++: the Heavy Ion Monte Carlo Generator for the High-Luminosity LHC Era

Authors: Gábor Bíró, Gergely Gábor Barnaföldi, Gábor Papp, Miklos Gyulassy, Péter Lévai, Xin-Nian Wang, Ben-Wei Zhang

Abstract: Beyond 2025 we will enter the High-Luminosity era of the LHC, right after the upgrades of the third Long Shutdown of the Large Hadron Collider (LHC). The ongoing state-of-the-art experimental instrument upgrades require high-performance simulation support in the background, that is modern, robust, and comes with long term support. The original FORTRAN based HIJING (Heavy Ion Jet INteraction Genera… ▽ More Beyond 2025 we will enter the High-Luminosity era of the LHC, right after the upgrades of the third Long Shutdown of the Large Hadron Collider (LHC). The ongoing state-of-the-art experimental instrument upgrades require high-performance simulation support in the background, that is modern, robust, and comes with long term support. The original FORTRAN based HIJING (Heavy Ion Jet INteraction Generator) has been used intensively since almost three decades by the high energy physics and heavy-ion community. However, it is getting overly challenging to conform to these new requirements. Our novel Monte Carlo event generator, the HIJING++ is the successor of the old FORTRAN version containing all the physics that its predecessor have. Moreover, among others a flexible module handling layer and an analysis interface is also introduced. This latter supports the most popular event container formats such as simple ascii, ROOT and the HepMC format, together with RIVET support. In this paper we compare the pre-release results of HIJING++ with proton-proton experimental data and Pythia8 calculations. △ Less

Submitted 14 January, 2019; originally announced January 2019.

Comments: Proceedings from the International Conference on Hard and Electromagnetic Probes of High-Energy Nuclear Collisions, 30 September - 5 October 2018 , Aix-Les-Bains, Savoie, France

Long term measurements from the Mátra Gravitational and Geophysical Laboratory

Authors: P. Ván, G. G. Barnaföldi, T. Bulik, T. Biró, S. Czellár, M. Cieślar, Cs. Czanik, E. Dávid, E. Debreceni, M. Denys, M. Dobróka, E. Fenyvesi, D. Gondek-Rosińska, Z. Gráczer, G. Hamar, G. Huba, B. Kacskovics, Á. Kis, I. Kovács, R. Kovács, I. Lemperger, P. Lévai, S. Lökös, J. Mlynarczyk, J. Molnár , et al. (15 additional authors not shown)

Abstract: Summary of the long term data taking, related to one of the proposed next generation ground-based gravitational detector's location is presented here. Results of seismic and infrasound noise, electromagnetic attenuation and cosmic muon radiation measurements are reported in the underground Matra Gravitational and Geophysical Laboratory near Gyöngyösoroszi, Hungary. The collected seismic data of mo… ▽ More Summary of the long term data taking, related to one of the proposed next generation ground-based gravitational detector's location is presented here. Results of seismic and infrasound noise, electromagnetic attenuation and cosmic muon radiation measurements are reported in the underground Matra Gravitational and Geophysical Laboratory near Gyöngyösoroszi, Hungary. The collected seismic data of more than two years is evaluated from the point of view of the Einstein Telescope, a proposed third generation underground gravitational wave observatory. Applying our results for the site selection will significantly improve the signal to nose ratio of the multi-messenger astrophysics era, especially at the low frequency regime. △ Less

Submitted 13 November, 2018; originally announced November 2018.

Comments: 47 pages, 37 figures

Journal ref: The European Physical Journal, Special Topics 228, 1693-1743 (2019)

HIJING++, a Heavy Ion Jet INteraction Generator for the High-luminosity Era of the LHC and Beyond

Authors: Gábor Bíró, Gábor Papp, Gergely Gábor Barnaföldi, Dániel Nagy, Miklos Gyulassy, Péter Lévai, Xin-Nian Wang, Ben-Wei Zhang

Abstract: HIJING++ (Heavy Ion Jet INteraction Generator) is the successor of the widely used original HIJING, developed almost three decades ago. While the old versions (1.x and 2.x) were written in FORTRAN, HIJING++ was completely rewritten in C++. During the development we keep in mind the requirements of the high-energy heavy-ion community: the new Monte Carlo software have a well designed modular framew… ▽ More HIJING++ (Heavy Ion Jet INteraction Generator) is the successor of the widely used original HIJING, developed almost three decades ago. While the old versions (1.x and 2.x) were written in FORTRAN, HIJING++ was completely rewritten in C++. During the development we keep in mind the requirements of the high-energy heavy-ion community: the new Monte Carlo software have a well designed modular framework, therefore any future modifications are much easier to implement. It contains all the physical models that were also present in it's predecessor, but utilizing modern C++ features it also includes native thread based parallelism, an easy-to-use analysis interface and a modular plugin system, which makes room for possible future improvements. In this paper we summarize the results of our performance tests measured on 2 widely used architectures. △ Less

Submitted 5 November, 2018; originally announced November 2018.

Comments: Presented at Hot Quarks 2018 -- Workshop for young scientists on the physics of ultrarelativistic nucleus-nucleus collisions, Texel, The Netherlands, September 7-14 2018. Submitted to MDPI Proceedings

Particle identification studies with a full-size 4-GEM prototype for the ALICE TPC upgrade

Authors: M. M. Aggarwal, Z. Ahammed, S. Aiola, J. Alme, T. Alt, W. Amend, A. Andronic, V. Anguelov, H. Appelshäuser, M. Arslandok, R. Averbeck, M. Ball, G. G. Barnaföldi, E. Bartsch, R. Bellwied, G. Bencedi, M. Berger, N. Bialas, P. Bialas, L. Bianchi, S. Biswas, L. Boldizsár, L. Bratrud, P. Braun-Munzinger, M. Bregant , et al. (155 additional authors not shown)

Abstract: A large Time Projection Chamber is the main device for tracking and charged-particle identification in the ALICE experiment at the CERN LHC. After the second long shutdown in 2019/20, the LHC will deliver Pb beams colliding at an interaction rate of about 50 kHz, which is about a factor of 50 above the present readout rate of the TPC. This will result in a significant improvement on the sensitivit… ▽ More A large Time Projection Chamber is the main device for tracking and charged-particle identification in the ALICE experiment at the CERN LHC. After the second long shutdown in 2019/20, the LHC will deliver Pb beams colliding at an interaction rate of about 50 kHz, which is about a factor of 50 above the present readout rate of the TPC. This will result in a significant improvement on the sensitivity to rare probes that are considered key observables to characterize the QCD matter created in such collisions. In order to make full use of this luminosity, the currently used gated Multi-Wire Proportional Chambers will be replaced. The upgrade relies on continuously operated readout detectors employing Gas Electron Multiplier technology to retain the performance in terms of particle identification via the measurement of the specific energy loss by ionization d$E$/d$x$. A full-size readout chamber prototype was assembled in 2014 featuring a stack of four GEM foils as an amplification stage. The performance of the prototype was evaluated in a test beam campaign at the CERN PS. The d$E$/d$x$ resolution complies with both the performance of the currently operated MWPC-based readout chambers and the challenging requirements of the ALICE TPC upgrade program. Detailed simulations of the readout system are able to reproduce the data. △ Less

Submitted 17 June, 2018; v1 submitted 8 May, 2018; originally announced May 2018.

Comments: Submitted to NIM A

Journal ref: Nucl. Instrum. Meth. A903 (2018), 215-223

First report of long term measurements of the {MGGL} laboratory in the {M}átra mountain range

Authors: G. G. Barnaföldi, T. Bulik, M. Cieslar, E. Dávid, M. Dobróka, E. Fenyvesi, D. Gondek-Rosinska, Z. Gráczer, G. Hamar, G. Huba, Á. Kis, R. Kovács, I. Lemperger, P. Lévai, J. Molnár, D. Nagy, A. Novák, L. Oláh, P. Pázmándi, D. Piri, L. Somlai, T. Starecki, M. Suchenek, G. Surányi, S. Szalai , et al. (6 additional authors not shown)

Abstract: Matra Gravitational and Geophysical Laboratory (MGGL) has been established near Gyöngyösoroszi, Hungary in 2015, in the cavern system of an unused ore mine. The Laboratory is located at 88~m below the surface, with the aim to measure and analyse the advantages of the underground installation of third generation gravitational wave detectors. Specialized instruments have been installed to measure se… ▽ More Matra Gravitational and Geophysical Laboratory (MGGL) has been established near Gyöngyösoroszi, Hungary in 2015, in the cavern system of an unused ore mine. The Laboratory is located at 88~m below the surface, with the aim to measure and analyse the advantages of the underground installation of third generation gravitational wave detectors. Specialized instruments have been installed to measure seismic, infrasound, electromagnetic noise, and the variation of the cosmic muon flux. In the preliminary (RUN-0) test period, March-August 2016, data collection has been accomplished. In this paper we describe the research potential of the MGGL, list the installed equipments and summarize the experimental results of RUN-0. Here we report RUN-0 data, that prepares systematic and synchronized data collection of the next run period. △ Less

Submitted 3 May, 2017; v1 submitted 24 October, 2016; originally announced October 2016.

Comments: 24 pages, 16 figures, accepted version

Journal ref: Class. Quantum Grav. 2017, V34, 114001 (22pp)

On the Way to Future's High Energy Particle Physics Transport Code

Authors: Gábor Bíró, Gergely Gábor Barnaföldi, Endre Futó

Abstract: High Energy Physics (HEP) needs a huge amount of computing resources. In addition data acquisition, transfer, and analysis require a well developed infrastructure too. In order to prove new physics disciplines it is required to higher the luminosity of the accelerator facilities, which produce more-and-more data in the experimental detectors. Both testing new theories and detector R&D are based on… ▽ More High Energy Physics (HEP) needs a huge amount of computing resources. In addition data acquisition, transfer, and analysis require a well developed infrastructure too. In order to prove new physics disciplines it is required to higher the luminosity of the accelerator facilities, which produce more-and-more data in the experimental detectors. Both testing new theories and detector R&D are based on complex simulations. Today have already reach that level, the Monte Carlo detector simulation takes much more time than real data collection. This is why speed up of the calculations and simulations became important in the HEP community. The Geant Vector Prototype (GeantV) project aims to optimize the most-used particle transport code applying parallel computing and to exploit the capabilities of the modern CPU and GPU architectures as well. With the maximized concurrency at multiple levels the GeantV is intended to be the successor of the Geant4 particle transport code that has been used since two decades successfully. Here we present our latest result on the GeantV tests performances, comparing CPU/GPU based vectorized GeantV geometrical code to the Geant4 version. △ Less

Submitted 26 May, 2016; v1 submitted 21 December, 2015; originally announced December 2015.