Showing 1–9 of 9 results for author: Bargatin, I

Numerical and Experimental Study on the Addition of Surface Roughness to Micro-Propellers

Authors: Justin P Cooke, Matthew F Campbell, Edward B Steager, Igor Bargatin, Mark H Yim, George I Park

Abstract: Micro aerial vehicles are making a large impact in applications such as search-and-rescue, package delivery, and recreation. Unfortunately, these diminutive drones are currently constrained to carrying small payloads, in large part because they use propellers optimized for larger aircraft and inviscid flow regimes. Fully realizing the potential of emerging microflyers requires next-generation prop… ▽ More Micro aerial vehicles are making a large impact in applications such as search-and-rescue, package delivery, and recreation. Unfortunately, these diminutive drones are currently constrained to carrying small payloads, in large part because they use propellers optimized for larger aircraft and inviscid flow regimes. Fully realizing the potential of emerging microflyers requires next-generation propellers that are specifically designed for low-Reynolds number conditions and that include new features advantageous in highly viscous flows. One aspect that has received limited attention in the literature is the addition of roughness to propeller blades as a method of reducing drag and increasing thrust. To investigate this possibility, we used large eddy simulation to conduct a numerical investigation of smooth and rough propellers. Our results indicate that roughness produces a 2% increase in thrust and a 5% decrease in power relative to a baseline smooth propeller operating at the same Reynolds number of Rec = 6500, held constant by rotational speed. We corroborated our numerical findings using thrust-stand-based experiments of 3D-printed propellers identical to those of the numerical simulations. Our study confirms that surface roughness is an additional parameter within the design space for micro-propellers that will lead to unprecedented drone efficiencies and payloads. △ Less

Submitted 29 June, 2023; originally announced June 2023.

Comments: 23 Pages, 9 Figures

Photophoretic Light-flyers with Germanium Coatings as Selective Absorbers

Authors: Zhipeng Lu, Gulzhan Aldan, Danielle Levin, Matthew F. Campbell, Igor Bargatin

Abstract: The goal of ultrathin lightweight photophoretic flyers, or light-flyers for short, is to levitate continuously in Earth's upper atmosphere using only sunlight for propulsive power. We previously reported light-flyers that levitated by utilizing differences in thermal accommodation coefficient (TAC) between the top and bottom of a thin film, made possible by coating their lower surfaces with carbon… ▽ More The goal of ultrathin lightweight photophoretic flyers, or light-flyers for short, is to levitate continuously in Earth's upper atmosphere using only sunlight for propulsive power. We previously reported light-flyers that levitated by utilizing differences in thermal accommodation coefficient (TAC) between the top and bottom of a thin film, made possible by coating their lower surfaces with carbon nanotubes (CNTs). Such designs, though successful, were limited due to their high thermal emissivity (>0.5), which prevented them from achieving high temperatures and resulted in their transferring relatively low amounts of momentum to the surrounding gas. To address this issue, we have developed light-flyers with undoped germanium layers that selectively absorb nearly 80% of visible light but are mostly transparent in the thermal infrared, with an average thermal emissivity of <0.1. Our experiments show that germanium-coated light-flyers could levitate at up to 43% lower light irradiances than mylar-CNT disks with identical sizes. In addition, we simulated our experiments using a combined first-principles-empirical model, allowing us to predict that our 2-cm-diameter disk-shaped germanium-coated light-flyers can levitate in the mesosphere (altitudes 68-78 km) under the natural sunlight (1.36 kW/m2). Similar ultrathin selective-absorber coatings can also be applied to three-dimensional light-flyers shaped like solar balloons, allowing them to carry significant payloads and thereby revolutionize long-term atmospheric exploration of Earth or Mars. △ Less

Submitted 30 May, 2023; originally announced May 2023.

3D photophoretic aircraft made from ultralight porous materials can carry kg-scale payloads in the mesosphere

Authors: Thomas Celenza, Andy Eskenazi, Igor Bargatin

Abstract: We show that photophoretic aircraft would greatly benefit from a three-dimensional (3D) hollow geometry that pumps ambient air through sidewalls to create a high-speed jet. To identify optimal geometries, we developed a theoretical expression for the lift force based on both Stokes (low-Re) and momentum (high-Re) theory and validated it using finite-element fluid-dynamics simulations. We then syst… ▽ More We show that photophoretic aircraft would greatly benefit from a three-dimensional (3D) hollow geometry that pumps ambient air through sidewalls to create a high-speed jet. To identify optimal geometries, we developed a theoretical expression for the lift force based on both Stokes (low-Re) and momentum (high-Re) theory and validated it using finite-element fluid-dynamics simulations. We then systematically varied geometric parameters, including Knudsen pump porosity, to minimize the operating altitude or maximize the payload. Assuming that the large vehicles can be made from previously demonstrated nanocardboard material, the minimum altitude is 55 km while the payload can reach 1 kilogram for 3D structures with 10-meter diameter at 80 km altitude. In all cases, the maximum areal density of the sidewalls cannot exceed a few grams per square meter, demonstrating the need for ultralight porous materials. △ Less

Submitted 5 July, 2024; v1 submitted 10 January, 2023; originally announced January 2023.

Comments: Main paper: 9 pages, 6 figures. Supplementary Information: 25 pages, 19 figures

Minimizing the Ground Effect for Photophoretically Levitating Disks

Authors: Zhipeng Lu, Miranda Stern, **qiao Li, David Candia, Lorenzo Yao-Bate, Thomas J. Celenza, Mohsen Azadi, Matthew F. Campbell, Igor Bargatin

Abstract: Photophoretic levitation is a propulsion mechanism in which lightweight objects can be lifted and controlled through their interactions with light. Since photophoretic forces on macroscopic objects are usually maximized at low pressures, they may be tested in vacuum chambers in close proximity to the chamber floor and walls. We report here experimental evidence that the terrain under levitating mi… ▽ More Photophoretic levitation is a propulsion mechanism in which lightweight objects can be lifted and controlled through their interactions with light. Since photophoretic forces on macroscopic objects are usually maximized at low pressures, they may be tested in vacuum chambers in close proximity to the chamber floor and walls. We report here experimental evidence that the terrain under levitating microflyers, including the chamber floor or the launchpad from which microflyers lift off, can greatly increase the photophoretic lift forces relative to their free-space (mid-air) values. To characterize this so-called "ground effect" during vacuum chamber tests, we introduced a new miniature launchpad composed of three J-shaped (candy-cane-like) wires that minimized a microflyer's extraneous interactions with underlying surfaces. We compared our new launchpads to previously used wire-mesh launchpads for simple levitating mylar-based disks with diameters of 2, 4, and 8 cm. Importantly, wire-mesh launchpads increased the photophoretic lift force by up to sixfold. A significant ground effect was also associated with the bottom of the vacuum chamber, particularly when the distance to the bottom surface was less than the diameter of the levitating disk. We provide guidelines to minimize the ground effect in vacuum chamber experiments, which are necessary to test photophoretic microflyers intended for high-altitude exploration and surveillance on Earth or on Mars. △ Less

Submitted 1 September, 2022; originally announced September 2022.

Comments: 7 pages, 7 figures, including the Supplemental Material

Multi-scale photonic emissivity engineering for relativistic lightsail thermal regulation

Authors: John Brewer, Matthew F. Campbell, Pawan Kumar, Sachin Kulkarni, Deep Jariwala, Igor Bargatin, Aaswath P. Raman

Abstract: The Breakthrough Starshot Initiative aims to send a gram-scale probe to Proxima Centuri B using a laser-accelerated lightsail traveling at relativistic speeds. Thermal management is a key lightsail design objective because of the intense laser powers required but has generally been considered secondary to accelerative performance. Here, we demonstrate nanophotonic photonic crystal slab reflectors… ▽ More The Breakthrough Starshot Initiative aims to send a gram-scale probe to Proxima Centuri B using a laser-accelerated lightsail traveling at relativistic speeds. Thermal management is a key lightsail design objective because of the intense laser powers required but has generally been considered secondary to accelerative performance. Here, we demonstrate nanophotonic photonic crystal slab reflectors composed of 2H-phase molybdenum disulfide and crystalline silicon nitride, highlight the inverse relationship between the thermal band extinction coefficient and the lightsail's maximum temperature, and examine the trade-off between the acceleration distance and setting realistic sail thermal limits, ultimately realizing a thermally endurable acceleration minimum distance of 16.3~Gm. We additionally demonstrate multi-scale photonic structures featuring thermal-wavelength-scale Mie resonant geometries, and characterize their broadband Mie resonance-driven emissivity enhancement and acceleration distance reduction. Our results highlight new possibilities in simultaneously controlling optical and thermal response over broad wavelength ranges in ultralight nanophotonic structures. △ Less

Submitted 14 September, 2021; v1 submitted 3 June, 2021; originally announced June 2021.

Comments: 15 pages, 4 figures

Relativistic light sails need to billow

Authors: Matthew F. Campbell, John Brewer, Deep Jariwala, Aaswath Raman, Igor Bargatin

Abstract: We argue that light sails that are rapidly accelerated to relativistic velocities by lasers must be significantly curved in order to reduce their mechanical stresses and avoid tears. Using an integrated opto-thermo-mechanical model, we show that the diameter and radius of curvature of a circular light sail should be comparable in magnitude, both on the order of a few meters in optimal designs for… ▽ More We argue that light sails that are rapidly accelerated to relativistic velocities by lasers must be significantly curved in order to reduce their mechanical stresses and avoid tears. Using an integrated opto-thermo-mechanical model, we show that the diameter and radius of curvature of a circular light sail should be comparable in magnitude, both on the order of a few meters in optimal designs for gram-scale payloads. Moreover, when sufficient laser power is available, a sail's acceleration length decreases and its chip payload capacity increases as its curvature increases. Our findings provide guidance for emerging light sail design programs, which herald a new era of interstellar space exploration. △ Less

Submitted 22 May, 2021; originally announced May 2021.

Comments: 8 pages, 4 figures

Controlled photophoretic levitation of nanostructured thin films for near-space flight

Authors: Mohsen Azadi, George A. Popov, Zhipeng Lu, Andy G. Eskenazi, Ji Won Bang, Matthew F. Campbell, Howard Hu, Igor Bargatin

Abstract: We report light-driven levitation of macroscopic polymer films whose bottom surface is engineered to maximize the thermal accommodation coefficient. Specifically, we levitated centimeter-scale disks made of commercial 0.5-micron-thick mylar film coated with carbon nanotubes on one side. When illuminated with light intensity comparable to natural sunlight, the polymer disk heats up and interacts wi… ▽ More We report light-driven levitation of macroscopic polymer films whose bottom surface is engineered to maximize the thermal accommodation coefficient. Specifically, we levitated centimeter-scale disks made of commercial 0.5-micron-thick mylar film coated with carbon nanotubes on one side. When illuminated with light intensity comparable to natural sunlight, the polymer disk heats up and interacts with incident gas molecules differently on the top and bottom sides, producing a net recoil force. This lift force is maximized at gas pressures corresponding to Knudsen number on the order of 0.3, and correspondingly, we observed the levitation of 0.6-cm-diameter disks in a vacuum chamber at pressures between 10 and 30 Pa. Moreover, we controlled the flight of the disks using a shaped beam that optically trapped the levitating disks. Our experimentally validated theoretical model predicts that the lift forces can be many times the weight of the films, allowing payloads of up to 10 milligrams for sunlight-powered low-cost microflyers in the upper atmosphere at altitudes of 50-100 km. △ Less

Submitted 13 May, 2020; originally announced May 2020.

Comments: Main text (10 pages, 4 figures) + Supplementary Information (23 pages, 14 figures) in a single PDF file

Journal ref: Science Advances Vol. 7, no. 7, eabe1127 (2021)

Photophoretic Levitation of Macroscopic Nanocardboard Plates

Authors: John Cortes, Christopher Stanczak, Maanav Narula, Mohsen Azadi, Samuel M. Nicaise, Howard Hu, Igor Bargatin

Abstract: Scaling down miniature rotorcraft and flap**-wing flyers to sub-centimeter dimensions is challenging due to complex electronics requirements, manufacturing limitations, and the increase in viscous dam** at low Reynolds numbers. Photophoresis, or light-driven fluid flow, was previously used to levitate solid particles without any moving parts but only at the scale of 1-20 micrometers. Here, we… ▽ More Scaling down miniature rotorcraft and flap**-wing flyers to sub-centimeter dimensions is challenging due to complex electronics requirements, manufacturing limitations, and the increase in viscous dam** at low Reynolds numbers. Photophoresis, or light-driven fluid flow, was previously used to levitate solid particles without any moving parts but only at the scale of 1-20 micrometers. Here, we leverage stiff architectured plates with 50-nm thickness to realize photophoretic levitation at the millimeter to centimeter scales. Instead of creating lift through conventional rotors or wings, our levitation occurs due to light-induced thermal transpiration through micro-channels within our plates. At atmospheric pressure, the plates hover above a solid substrate at heights of ~0.5 mm by creating an air cushion beneath the plate. Moreover, at reduced pressures (10-1000 Pa), the increased speed of thermal transpiration through the plate's channels creates an air jet that enables mid-air levitation and allows the plates to carry small payloads heavier than the plates themselves. This new propulsion mechanism for macroscopic structures creates the prospect of future nanotechnology-enabled flying vehicles without any moving parts in the Earth's upper atmosphere and at the surface of other planets. △ Less

Submitted 9 October, 2019; originally announced October 2019.

In-plane nanoelectromechanical resonators based on silicon nanowire piezoresistive detection

Authors: Ervin Mile, Guillaume Jourdan, Igor Bargatin, Sebastien Labarthe, Carine Marcoux, Philippe Andreucci, Sebastien Hentz, Chaddy Kharrat, Eric Colinet, Laurent Duraffourg

Abstract: We report an actuation/detection scheme with a top-down nano-electromechanical system for frequency shift-based sensing applications with outstanding performance. It relies on electrostatic actuation and piezoresistive nanowire gauges for in-plane motion transduction. The process fabrication is fully CMOS compatible. The results show a very large dynamic range (DR) of more than 100dB and an unpr… ▽ More We report an actuation/detection scheme with a top-down nano-electromechanical system for frequency shift-based sensing applications with outstanding performance. It relies on electrostatic actuation and piezoresistive nanowire gauges for in-plane motion transduction. The process fabrication is fully CMOS compatible. The results show a very large dynamic range (DR) of more than 100dB and an unprecedented signal to background ratio (SBR) of 69dB providing an improvement of two orders of magnitude in the detection efficiency presented in the state of the art in NEMS field. Such a dynamic range results from both negligible 1/f-noise and very low Johnson noise compared to the thermomechanical noise. This simple low-power detection scheme paves the way for new class of robust mass resonant sensor. △ Less

Submitted 11 January, 2010; originally announced January 2010.