-
Josephson parametric amplifier with Chebyshev gain profile and high saturation
Authors:
Ryan Kaufman,
Theodore White,
Mark I. Dykman,
Andrea Iorio,
George Stirling,
Sabrina Hong,
Alex Opremcak,
Andreas Bengtsson,
Lara Faoro,
Joseph C. Bardin,
Tim Burger,
Robert Gasca,
Ofer Naaman
Abstract:
We demonstrate a Josephson parametric amplifier design with a band-pass impedance matching network based on a third-order Chebyshev prototype. We measured eight amplifiers operating at 4.6 GHz that exhibit gains of 20 dB with less than 1 dB gain ripple and up to 500 MHz bandwidth. The amplifiers further achieve high output saturation powers around -73 dBm based on the use of rf-SQUID arrays as the…
▽ More
We demonstrate a Josephson parametric amplifier design with a band-pass impedance matching network based on a third-order Chebyshev prototype. We measured eight amplifiers operating at 4.6 GHz that exhibit gains of 20 dB with less than 1 dB gain ripple and up to 500 MHz bandwidth. The amplifiers further achieve high output saturation powers around -73 dBm based on the use of rf-SQUID arrays as their nonlinear element. We characterize the system readout efficiency and its signal-to-noise ratio near saturation using a Sycamore processor, finding the data consistent with near quantum limited noise performance of the amplifiers. In addition, we measure the amplifiers' intermodulation distortion in two-tone experiments as a function of input power and inter-tone detuning, and observe excess distortion at small detuning with a pronounced dip as a function of signal power, which we interpret in terms of power-dependent dielectric losses.
△ Less
Submitted 28 May, 2023;
originally announced May 2023.
-
Readout of a quantum processor with high dynamic range Josephson parametric amplifiers
Authors:
T. C. White,
Alex Opremcak,
George Sterling,
Alexander Korotkov,
Daniel Sank,
Rajeev Acharya,
Markus Ansmann,
Frank Arute,
Kunal Arya,
Joseph C. Bardin,
Andreas Bengtsson,
Alexandre Bourassa,
Jenna Bovaird,
Leon Brill,
Bob B. Buckley,
David A. Buell,
Tim Burger,
Brian Burkett,
Nicholas Bushnell,
Zijun Chen,
Ben Chiaro,
Josh Cogan,
Roberto Collins,
Alexander L. Crook,
Ben Curtin
, et al. (69 additional authors not shown)
Abstract:
We demonstrate a high dynamic range Josephson parametric amplifier (JPA) in which the active nonlinear element is implemented using an array of rf-SQUIDs. The device is matched to the 50 $Ω$ environment with a Klopfenstein-taper impedance transformer and achieves a bandwidth of 250-300 MHz, with input saturation powers up to -95 dBm at 20 dB gain. A 54-qubit Sycamore processor was used to benchmar…
▽ More
We demonstrate a high dynamic range Josephson parametric amplifier (JPA) in which the active nonlinear element is implemented using an array of rf-SQUIDs. The device is matched to the 50 $Ω$ environment with a Klopfenstein-taper impedance transformer and achieves a bandwidth of 250-300 MHz, with input saturation powers up to -95 dBm at 20 dB gain. A 54-qubit Sycamore processor was used to benchmark these devices, providing a calibration for readout power, an estimate of amplifier added noise, and a platform for comparison against standard impedance matched parametric amplifiers with a single dc-SQUID. We find that the high power rf-SQUID array design has no adverse effect on system noise, readout fidelity, or qubit dephasing, and we estimate an upper bound on amplifier added noise at 1.6 times the quantum limit. Lastly, amplifiers with this design show no degradation in readout fidelity due to gain compression, which can occur in multi-tone multiplexed readout with traditional JPAs.
△ Less
Submitted 22 November, 2022; v1 submitted 16 September, 2022;
originally announced September 2022.
-
Microwaves in Quantum Computing
Authors:
Joseph C. Bardin,
Daniel H. Slichter,
David J. Reilly
Abstract:
Quantum information processing systems rely on a broad range of microwave technologies and have spurred development of microwave devices and methods in new operating regimes. Here we review the use of microwave signals and systems in quantum computing, with specific reference to three leading quantum computing platforms: trapped atomic ion qubits, spin qubits in semiconductors, and superconducting…
▽ More
Quantum information processing systems rely on a broad range of microwave technologies and have spurred development of microwave devices and methods in new operating regimes. Here we review the use of microwave signals and systems in quantum computing, with specific reference to three leading quantum computing platforms: trapped atomic ion qubits, spin qubits in semiconductors, and superconducting qubits. We highlight some key results and progress in quantum computing achieved through the use of microwave systems, and discuss how quantum computing applications have pushed the frontiers of microwave technology in some areas. We also describe open microwave engineering challenges for the construction of large-scale, fault-tolerant quantum computers.
△ Less
Submitted 2 November, 2020;
originally announced November 2020.
-
Hartree-Fock on a superconducting qubit quantum computer
Authors:
Frank Arute,
Kunal Arya,
Ryan Babbush,
Dave Bacon,
Joseph C. Bardin,
Rami Barends,
Sergio Boixo,
Michael Broughton,
Bob B. Buckley,
David A. Buell,
Brian Burkett,
Nicholas Bushnell,
Yu Chen,
Zijun Chen,
Benjamin Chiaro,
Roberto Collins,
William Courtney,
Sean Demura,
Andrew Dunsworth,
Daniel Eppens,
Edward Farhi,
Austin Fowler,
Brooks Foxen,
Craig Gidney,
Marissa Giustina
, et al. (57 additional authors not shown)
Abstract:
As the search continues for useful applications of noisy intermediate scale quantum devices, variational simulations of fermionic systems remain one of the most promising directions. Here, we perform a series of quantum simulations of chemistry the largest of which involved a dozen qubits, 78 two-qubit gates, and 114 one-qubit gates. We model the binding energy of ${\rm H}_6$, ${\rm H}_8$,…
▽ More
As the search continues for useful applications of noisy intermediate scale quantum devices, variational simulations of fermionic systems remain one of the most promising directions. Here, we perform a series of quantum simulations of chemistry the largest of which involved a dozen qubits, 78 two-qubit gates, and 114 one-qubit gates. We model the binding energy of ${\rm H}_6$, ${\rm H}_8$, ${\rm H}_{10}$ and ${\rm H}_{12}$ chains as well as the isomerization of diazene. We also demonstrate error-mitigation strategies based on $N$-representability which dramatically improve the effective fidelity of our experiments. Our parameterized ansatz circuits realize the Givens rotation approach to non-interacting fermion evolution, which we variationally optimize to prepare the Hartree-Fock wavefunction. This ubiquitous algorithmic primitive corresponds to a rotation of the orbital basis and is required by many proposals for correlated simulations of molecules and Hubbard models. Because non-interacting fermion evolutions are classically tractable to simulate, yet still generate highly entangled states over the computational basis, we use these experiments to benchmark the performance of our hardware while establishing a foundation for scaling up more complex correlated quantum simulations of chemistry.
△ Less
Submitted 18 September, 2020; v1 submitted 8 April, 2020;
originally announced April 2020.
-
Active Quenching of Superconducting Nanowire Single Photon Detectors
Authors:
Prasana Ravindran,
Risheng Cheng,
Hong Tang,
Joseph C. Bardin
Abstract:
Superconducting nanowire single photon detectors are typically biased using a constant current source and shunted in a conductance which is over an order of magnitude larger than the peak normal domain conductance of the detector. While this design choice is required to ensure quenching of the normal domain, the use of a small load resistor limits the pulse amplitude, rising-edge slew rate, and re…
▽ More
Superconducting nanowire single photon detectors are typically biased using a constant current source and shunted in a conductance which is over an order of magnitude larger than the peak normal domain conductance of the detector. While this design choice is required to ensure quenching of the normal domain, the use of a small load resistor limits the pulse amplitude, rising-edge slew rate, and recovery time of the detector. Here, we explore the possibility of actively quenching the normal domain, thereby removing the need to shunt the detector in a small resistance. We first consider the theoretical performance of an actively quenched superconducting nanowire single photon detector and, in comparison to a passively quenched device, we predict roughly an order of magnitude improvement in the slew rate and peak voltage achieved in this configuration. The experimental performance of actively and passively quenched superconducting nanowire single photon detectors are then compared. It is shown that, in comparison to a passively quenched device, the actively quenched detectors simultaneously exhibited improved count rates, dark count rates, and timing jitter.
△ Less
Submitted 26 November, 2019;
originally announced November 2019.
-
Probabilistic vortex crossing criterion for superconducting nanowire single-photon detectors
Authors:
Saman Jahani,
Li-** Yang,
Adrian Buganza Tepole,
Joseph C. Bardin,
Hong X. Tang,
Zubin Jacob
Abstract:
Superconducting nanowire single-photon detectors have emerged as a promising technology for quantum metrology from the mid-infrared to ultra-violet frequencies. Despite the recent experimental successes, a predictive model to describe the detection event in these detectors is needed to optimize the detection metrics. Here, we propose a probabilistic criterion for single-photon detection based on s…
▽ More
Superconducting nanowire single-photon detectors have emerged as a promising technology for quantum metrology from the mid-infrared to ultra-violet frequencies. Despite the recent experimental successes, a predictive model to describe the detection event in these detectors is needed to optimize the detection metrics. Here, we propose a probabilistic criterion for single-photon detection based on single-vortex (flux quanta) crossing the width of the nanowire. Our model makes a connection between the dark-counts and photon-counts near the detection threshold. The finite-difference calculations demonstrate that a change in the bias current distribution as a result of the photon absorption significantly increases the probability of single-vortex crossing even if the vortex potential barrier has not vanished completely. We estimate the instrument response function and show that the timing uncertainty of this vortex tunneling process corresponds to a fundamental limit in timing jitter of the click event. We demonstrate a trade-space between this intrinsic (quantum) timing jitter, quantum efficiency, and dark count rate in TaN, WSi, and NbN superconducting nanowires at different experimental conditions. Our detection model can also explain the experimental observation of exponential decrease in the quantum efficiency of SNSPDs at lower energies. This leads to a pulse-width dependency in the quantum efficiency, and it can be further used as an experimental test to compare across different detection models.
△ Less
Submitted 31 March, 2020; v1 submitted 26 January, 2019;
originally announced January 2019.
-
Asymmetric Two-Terminal Graphene Detector for Broadband Radiofrequency Heterodyne- and Self-Mixing
Authors:
Jiayue Tong,
Matthew C. Conte,
Thomas Goldstein,
Sigfrid K. Yngvesson,
Joseph C. Bardin,
Jun Yan
Abstract:
Graphene, a single atomic layer of covalently bonded carbon atoms, has been investigated intensively for optoelectronics and represents a promising candidate for high-speed electronics. Here we present a microwave mixer constructed as an asymmetrically-contacted two-terminal graphene device based on the thermoelectric effect. We report a 50 GHz (minimum) mixer bandwidth as well as 130 V/W (163 mA/…
▽ More
Graphene, a single atomic layer of covalently bonded carbon atoms, has been investigated intensively for optoelectronics and represents a promising candidate for high-speed electronics. Here we present a microwave mixer constructed as an asymmetrically-contacted two-terminal graphene device based on the thermoelectric effect. We report a 50 GHz (minimum) mixer bandwidth as well as 130 V/W (163 mA/W) extrinsic direct-detection responsivity. Anomalous second-harmonic generation due to self-mixing in our graphene detector is also observed. Careful investigation of the responsivity from four different approaches gives consistent results, confirming the exceptional performance of our zero-bias device operating at room temperature. The 50 GHz bandwidth indicates an extremely fast response time and our experimental results represent an encouraging advance towards practical graphene microwave devices, with anticipated future applications extended through millimeter wave and terahertz frequencies.
△ Less
Submitted 17 May, 2018;
originally announced May 2018.
