Showing 1–46 of 46 results for author: Baranov, V

The Mu2e crystal and SiPM calorimeter: construction status

Authors: Nikolay Atanov, Vladimir Baranov, Leo Borrel, Caterina Bloise, Julian Budagov, Sergio Ceravol, Franco Cervelli, Francesco Colao, Marco Cordelli, Giovanni Corradi, Yuri Davydov, Stefano Di Falco, Eleonora Diociaiuti, Simone Donati, Bertrand Echenard, Carlo Ferrari, Ruben Gargiulo, Antonio Gioiosa, Simona Giovannella, Valerio Giusti, Vladimir Glagolev, Francesco Grancagnolo, Dariush Hampai, Fabio Happacher, David Hitlin , et al. (15 additional authors not shown)

Abstract: The Mu2e experiment at Fermilab searches for the neutrino-less conversion of a negative muon into an electron, with a distinctive signature of a mono-energetic electron with energy of 104.967 MeV. The calorimeter is made of two disks of pure CsI crystals, each read out by two custom large area UV-extended SiPMs. It plays a fundamental role in providing excellent particle identification capabilitie… ▽ More The Mu2e experiment at Fermilab searches for the neutrino-less conversion of a negative muon into an electron, with a distinctive signature of a mono-energetic electron with energy of 104.967 MeV. The calorimeter is made of two disks of pure CsI crystals, each read out by two custom large area UV-extended SiPMs. It plays a fundamental role in providing excellent particle identification capabilities and an online trigger filter while improving the track reconstruction, requiring better than 10% energy and 500 ps timing resolutions for 100 MeV electrons. In this paper, we present the status of construction and the Quality Control (QC) performed on the produced crystals and photosensors, the development of the rad-hard electronics, and the most important results of the irradiation tests. Construction of the mechanics is also reported. Status and plans for the calorimeter assembly and its first commissioning are described. △ Less

Submitted 28 January, 2024; originally announced January 2024.

Journal ref: IEEE TRANSACTIONS ON NUCLEAR SCIENCE, VOL. 70, NO. 7, 2023

Operation and performance of MEG II detector

Authors: MEG II Collaboration, K. Afanaciev, A. M. Baldini, S. Ban, V. Baranov, H. Benmansour, M. Biasotti, G. Boca, P. W. Cattaneo, G. Cavoto, F. Cei, M. Chiappini, G. Chiarello, A. Corvaglia, F. Cuna, G. Dal Maso, A. De Bari, M. De Gerone, L. Ferrari Barusso, M. Francesconi, L. Galli, G. Gallucci, F. Gatti, L. Gerritzen, F. Grancagnolo , et al. (60 additional authors not shown)

Abstract: The MEG II experiment, located at the Paul Scherrer Institut (PSI) in Switzerland, is the successor to the MEG experiment, which completed data taking in 2013. MEG II started fully operational data taking in 2021, with the goal of improving the sensitivity of the mu+ -> e+ gamma decay down to 6e-14 almost an order of magnitude better than the current limit. In this paper, we describe the operation… ▽ More The MEG II experiment, located at the Paul Scherrer Institut (PSI) in Switzerland, is the successor to the MEG experiment, which completed data taking in 2013. MEG II started fully operational data taking in 2021, with the goal of improving the sensitivity of the mu+ -> e+ gamma decay down to 6e-14 almost an order of magnitude better than the current limit. In this paper, we describe the operation and performance of the experiment and give a new estimate of its sensitivity versus data acquisition time. △ Less

Submitted 8 January, 2024; v1 submitted 18 October, 2023; originally announced October 2023.

Comments: 42 pages, 55 figures. Submitted to EPJC

High efficiency muon registration system based on scintillator strips

Authors: A. Artikov, V. Baranov, A. Boikov, D. Chokheli, Yu. I. Davydov, V. Glagolev, A. Simonenko, Z. Tsamalaidze, I. Vasilyev, I. Zimin

Abstract: Experiments such as mu2e (FNAL, USA) and COMET (KEK, Japan), seeking the direct muon-to-electron conversion as part of the study of Charged Leptons Flavor Violation processes, should have a extremely high, up-to 99.99\%, efficiency muon detection system with a view to their subsequent suppression as background. In this article, the possibility to achieve such efficiency for a short and long term i… ▽ More Experiments such as mu2e (FNAL, USA) and COMET (KEK, Japan), seeking the direct muon-to-electron conversion as part of the study of Charged Leptons Flavor Violation processes, should have a extremely high, up-to 99.99\%, efficiency muon detection system with a view to their subsequent suppression as background. In this article, the possibility to achieve such efficiency for a short and long term is discussed for modules based on 7- or 10-mm-thick but same 40-mm-wide plastic scintillation strips with single 1.2 mm WLS fiber glued into the groove along the strip and using MPPC/SiPM for light detection. A Simplified Light Yield Distribution method to estimate the efficiency of the module was proposed and the simulation results obtained with GEANT 4 for a system based on a 4-by-4 array of 7x40x3000 mm strips compared with the experimental data. Found that for the systems required the high level registration efficiency at the 99.99\% and more, it is important to improve the light yield as much as possible and achieve the gap between neighbor scintillation volumes as small as possible. △ Less

Submitted 3 October, 2023; v1 submitted 25 September, 2023; originally announced September 2023.

SuperFGD prototype time resolution studies

Authors: I. Alekseev, T. Arihara, V. Baranov, L. Bartoszek, L. Bernardi, A. Blondel, A. V. Boikov, M. Buizza-Avanzini, F. Cadoux, J. Capó, J. Cayo, J. Chakrani, P. S. Chong, A. Chvirova, M. Danilov, Yu. I. Davydov, A. Dergacheva, N. Dokania, D. Douqa, O. Drapier, A. Eguchi, Y. Favre, D. Fedorova, S. Fedotov, Y. Fujii , et al. (65 additional authors not shown)

Abstract: The SuperFGD will be a part of the ND280 near detector of the T2K and Hyper Kamiokande projects, that will help to reduce systematic uncertainties related with neutrino flux and cross-section modeling. The upgraded ND280 will be able to perform a full exclusive reconstruction of the final state from neutrino-nucleus interactions, including measurements of low momentum protons, pions and, for the f… ▽ More The SuperFGD will be a part of the ND280 near detector of the T2K and Hyper Kamiokande projects, that will help to reduce systematic uncertainties related with neutrino flux and cross-section modeling. The upgraded ND280 will be able to perform a full exclusive reconstruction of the final state from neutrino-nucleus interactions, including measurements of low momentum protons, pions and, for the first time, event-by event measurements of neutron kinematics. The time resolution defines the neutron energy resolution. We present the results of time resolution measurements made with the SuperFGD prototype that consists of 9216 plastic scintillator cubes (cube size is 1 cm$^3$) readout with 1728 wavelength-shifting fibers going along three orthogonal directions. We use data from the muon beam exposure at CERN. The time resolution of 0.97 ns was obtained for one readout channel after implementing the time calibration with a correction for the time-walk effect. The time resolution improves with energy deposited in a scintillator cube. Averaging two readout channels for one scintillator cube improves the time resolution to 0.68 ns which means that signals in different channels are not synchronous. Therefore the contribution from the time recording step of 2.5 ns is averaged as well. Averaging time values from N channels improves the time resolution by $\sim 1/\sqrt{N}$. Therefore a very good time resolution should be achievable for neutrons since neutron recoils hit typically several scintillator cubes and in addition produce larger amplitudes than muons. Measurements performed with a laser and a wide-bandwidth oscilloscope demonstrated that the time resolution obtained with the muon beam is not far from its expected limit. The intrinsic time resolution of one channel is 0.67 ns for signals of 56 photo-electron typical for minimum ionizing particles. △ Less

Submitted 18 January, 2023; v1 submitted 21 June, 2022; originally announced June 2022.

Comments: 12 pages, 9 figures. Revised text, results unchanged

Journal ref: JINST 18 P01012 (2023)

Light outputs of yttrium doped BaF$_2$ crystals irradiated with neutrons

Authors: V. Baranov, Yu. I. Davydov, I. I. Vasilyev

Abstract: The fast luminescence component of barium fluoride (BaF$_2$) crystals with a subnanosecond decay time can find wide application in particle physics and nuclear physics. However, the slow luminescence component with the 630~ns decay time could cause pile-up signals at a high rate environment. Do** of BaF$_2$ crystals with rare earth elements suppresses the slow emission component, but at the same… ▽ More The fast luminescence component of barium fluoride (BaF$_2$) crystals with a subnanosecond decay time can find wide application in particle physics and nuclear physics. However, the slow luminescence component with the 630~ns decay time could cause pile-up signals at a high rate environment. Do** of BaF$_2$ crystals with rare earth elements suppresses the slow emission component, but at the same time the radiation hardness of the crystals deteriorates. This work presents the results of studying crystal samples, both pure BaF$_2$ and those doped with yttrium in a proportion of 1at.\%Y, 3at.\%Y and 5at.\%Y, irradiated with a fast neutron fluence of about 2.3$\times$10$^{14}$~n/cm$^2$. Their light output and decay kinetics were measured before and after irradiation. It is found that the light output loss of a pure BaF$_2$ crystal after irradiation is about 7\%, and the light output loss of yttrium doped samples after irradiation is about two times higher. The measurement results demonstrate that after irradiation the fast component of each sample has a relative light output loss 2-3\% larger than the slow one. △ Less

Submitted 18 November, 2021; originally announced November 2021.

The Search for $μ^+\to e^+ γ$ with 10$^{-14}$ Sensitivity: the Upgrade of the MEG Experiment

Authors: The MEG II Collaboration, Alessandro M. Baldini, Vladimir Baranov, Michele Biasotti, Gianluigi Boca, Paolo W. Cattaneo, Gianluca Cavoto, Fabrizio Cei, Marco Chiappini, Gianluigi Chiarello, Alessandro Corvaglia, Federica Cuna, Giovanni dal Maso, Antonio de Bari, Matteo De Gerone, Marco Francesconi, Luca Galli, Giovanni Gallucci, Flavio Gatti, Francesco Grancagnolo, Marco Grassi, Dmitry N. Grigoriev, Malte Hildebrandt, Kei Ieki, Fedor Ignatov , et al. (45 additional authors not shown)

Abstract: The MEG experiment took data at the Paul Scherrer Institute in the years 2009--2013 to test the violation of the lepton flavour conservation law, which originates from an accidental symmetry that the Standard Model of elementary particle physics has, and published the most stringent limit on the charged lepton flavour violating decay $μ^+ \rightarrow {\rm e}^+ γ$: BR($μ^+ \rightarrow {\rm e}^+ γ$)… ▽ More The MEG experiment took data at the Paul Scherrer Institute in the years 2009--2013 to test the violation of the lepton flavour conservation law, which originates from an accidental symmetry that the Standard Model of elementary particle physics has, and published the most stringent limit on the charged lepton flavour violating decay $μ^+ \rightarrow {\rm e}^+ γ$: BR($μ^+ \rightarrow {\rm e}^+ γ$) $<4.2 \times 10^{-13}$ at 90% confidence level. The MEG detector has been upgraded in order to reach a sensitivity of $6\times10^{-14}$. The basic principle of MEG II is to achieve the highest possible sensitivity using the full muon beam intensity at the Paul Scherrer Institute ($7\times10^{7}$ muons/s) with an upgraded detector. The main improvements are better rate capability of all sub-detectors and improved resolutions while kee** the same detector concept. In this paper, we present the current status of the preparation, integration and commissioning of the MEG II detector in the recent engineering runs. △ Less

Submitted 1 September, 2021; v1 submitted 22 July, 2021; originally announced July 2021.

Comments: 12 pages, 4 figures. The version of acceptance for Symmetry

Journal ref: Symmetry 2021, 13(9), 1591

Beam dynamics corrections to the Run-1 measurement of the muon anomalous magnetic moment at Fermilab

Authors: T. Albahri, A. Anastasi, K. Badgley, S. Baeßler, I. Bailey, V. A. Baranov, E. Barlas-Yucel, T. Barrett, F. Bedeschi, M. Berz, M. Bhattacharya, H. P. Binney, P. Bloom, J. Bono, E. Bottalico, T. Bowcock, G. Cantatore, R. M. Carey, B. C. K. Casey, D. Cauz, R. Chakraborty, S. P. Chang, A. Chapelain, S. Charity, R. Chislett , et al. (152 additional authors not shown)

Abstract: This paper presents the beam dynamics systematic corrections and their uncertainties for the Run-1 data set of the Fermilab Muon g-2 Experiment. Two corrections to the measured muon precession frequency $ω_a^m$ are associated with well-known effects owing to the use of electrostatic quadrupole (ESQ) vertical focusing in the storage ring. An average vertically oriented motional magnetic field is fe… ▽ More This paper presents the beam dynamics systematic corrections and their uncertainties for the Run-1 data set of the Fermilab Muon g-2 Experiment. Two corrections to the measured muon precession frequency $ω_a^m$ are associated with well-known effects owing to the use of electrostatic quadrupole (ESQ) vertical focusing in the storage ring. An average vertically oriented motional magnetic field is felt by relativistic muons passing transversely through the radial electric field components created by the ESQ system. The correction depends on the stored momentum distribution and the tunes of the ring, which has relatively weak vertical focusing. Vertical betatron motions imply that the muons do not orbit the ring in a plane exactly orthogonal to the vertical magnetic field direction. A correction is necessary to account for an average pitch angle associated with their trajectories. A third small correction is necessary because muons that escape the ring during the storage time are slightly biased in initial spin phase compared to the parent distribution. Finally, because two high-voltage resistors in the ESQ network had longer than designed RC time constants, the vertical and horizontal centroids and envelopes of the stored muon beam drifted slightly, but coherently, during each storage ring fill. This led to the discovery of an important phase-acceptance relationship that requires a correction. The sum of the corrections to $ω_a^m$ is 0.50 $\pm$ 0.09 ppm; the uncertainty is small compared to the 0.43 ppm statistical precision of $ω_a^m$. △ Less

Submitted 23 April, 2021; v1 submitted 7 April, 2021; originally announced April 2021.

Comments: 35 pages, 29 figures. Accepted by Phys. Rev. Accel. Beams

Report number: FERMILAB-PUB-21-133-E

Journal ref: Phys. Rev. Accel. Beams 24, 044002 (2021)

Beam particle tracking with a low-mass mini time projection chamber in the PEN experiment

Authors: C. J. Glaser, D. Pocanic, A. van der Schaaf, V. A. Baranov, N. V. Khomutov, N. P. Kravchuk, N. A. Kuchinsky

Abstract: The international PEN collaboration aims to obtain the branching ratio for the pion electronic decay $π^+ \to e^+ν_e(γ)$, aka $π_{e2}$, to a relative precision of $5\times 10^{-4}$ or better. The PEN apparatus comprises a number of detection systems, all contributing vital information to the PEN event reconstruction. This paper discusses the design, performance, and Monte Carlo simulation of the m… ▽ More The international PEN collaboration aims to obtain the branching ratio for the pion electronic decay $π^+ \to e^+ν_e(γ)$, aka $π_{e2}$, to a relative precision of $5\times 10^{-4}$ or better. The PEN apparatus comprises a number of detection systems, all contributing vital information to the PEN event reconstruction. This paper discusses the design, performance, and Monte Carlo simulation of the mini time projection chamber (mTPC) used for pion, muon, and positron beam particle tracking. We also review the use of the extracted trajectory coordinates in the analysis, in particular in constructing observables critical for discriminating background processes, and in maximizing the fiducial volume of the target in which decay event vertices can be accepted for branching ratio extraction without introducing bias. △ Less

Submitted 20 May, 2021; v1 submitted 22 December, 2020; originally announced December 2020.

Comments: 24 pages, 23 figures

Optical properties of YAG:Ce and GGG:Ce scintillation crystals irradiated with a high fluence proton beam

Authors: V. Baranov, Yu. I. Davydov, M. Mkrtchian, I. I. Vasilyev

Abstract: In this paper, we report on the study of the optical properties of YAG:Ce and GGG:Ce garnet crystals after irradiation in a 660~MeV proton beam with a fluence up to 8.9$\times$10$^{14}$ protons/cm$^2$. We found that the transparency of both crystals fell by no more than 7\% in the region of their own luminescence. The light yield of a YAG:Ce sample, measured one year after irradiation, dropped by… ▽ More In this paper, we report on the study of the optical properties of YAG:Ce and GGG:Ce garnet crystals after irradiation in a 660~MeV proton beam with a fluence up to 8.9$\times$10$^{14}$ protons/cm$^2$. We found that the transparency of both crystals fell by no more than 7\% in the region of their own luminescence. The light yield of a YAG:Ce sample, measured one year after irradiation, dropped by about 35\%. △ Less

Submitted 18 May, 2020; originally announced May 2020.

Journal ref: Physics of Particles and Nuclei Letters, 17(6), 878-881 (2020)

Mu2e calorimeter readout system

Authors: N. Atanov, V. Baranov, L. Baldini, J. Budagov, D. Caiulo, F. Cei, F. Cervelli, F. Colao, M. Cordelli, G. Corradi, Yu. I. Davydov, F. D'Errico, S. Di Falco, E. Diociaiuti, S. Donati, R. Donghia, B. Echenard, S. Faetti, S. Giovannella, S. Giudici, V. Glagolev, F. Grancagnolo, F. Happacher, D. G. Hitlin, L. Lazzeri , et al. (21 additional authors not shown)

Abstract: The Mu2e electromagnetic calorimeter is made of two disks of un-doped parallelepiped CsI crystals readout by SiPM. There are 674 crystals in one disk and each crystal is readout by an array of two SiPM. The readout electronics is composed of two types of modules: 1) the front-end module hosts the sha** amplifier and the high voltage linear regulator; since one front-end module is interfaced to o… ▽ More The Mu2e electromagnetic calorimeter is made of two disks of un-doped parallelepiped CsI crystals readout by SiPM. There are 674 crystals in one disk and each crystal is readout by an array of two SiPM. The readout electronics is composed of two types of modules: 1) the front-end module hosts the sha** amplifier and the high voltage linear regulator; since one front-end module is interfaced to one SiPM, a total of 2696 modules are needed for the entire calorimeter; 2) a waveform digitizer provides a further level of amplification and digitizes the SiPM signal at the sampling frequency of $200\ \text{M}\text{Hz}$ with 12-bits ADC resolution; since one board digitizes the data received from 20 SiPMs, a total of 136 boards are needed. The readout system operational conditions are hostile: ionization dose of $20\ \text{krads}$, neutron flux of $10^{12}\ \mathrm{n}(1\ \text{MeVeq})/\text{cm}^2$, magnetic field of $1\ \text{T}$ and in vacuum level of $10^{-4}\ \text{Torr}$. A description of the readout system and qualification tests is reported. △ Less

Submitted 9 July, 2019; originally announced July 2019.

Journal ref: Nuclear Inst. and Methods in Physics Research, A, 2019

The Mu2e calorimeter: quality assurance of production crystals and SiPMs

Authors: N. Atanov, V. Baranov, J. Budagov, D. Caiulo, F. Cervelli, F. Colao, M. Cordelli, G. Corradi, Yu. I. Davydov, S. Di Falco, E. Diociaiuti, S. Donati, R. Donghia, B. Echenard, S. Giovannella, V. Glagolev, F. Grancagnolo, F. Happacher, D. G. Hitlin, M. Martini, S. Miscetti, T. Miyashita, L. Morescalchi, P. Murat, E. Pedreschi , et al. (12 additional authors not shown)

Abstract: The Mu2e calorimeter is composed of two disks each containing 1348 pure CsI crystals, each crystal read out by two arrays of 6x6 mm2 monolithic SiPMs. The experimental requirements have been translated in a series of technical specifications for both crystals and SiPMs. Quality assurance tests, on first crystal and then SiPM production batches, confirm the performances of preproduction samples pre… ▽ More The Mu2e calorimeter is composed of two disks each containing 1348 pure CsI crystals, each crystal read out by two arrays of 6x6 mm2 monolithic SiPMs. The experimental requirements have been translated in a series of technical specifications for both crystals and SiPMs. Quality assurance tests, on first crystal and then SiPM production batches, confirm the performances of preproduction samples previously assembled in a calorimeter prototype and tested with an electron beam. The production yield is sufficient to allow the construction of a calorimeter of the required quality in the expected times. △ Less

Submitted 19 December, 2018; originally announced December 2018.

Comments: 2 pages, 2 figures, 14th meeting on Advanced Detectors

Effects of neutron radiation on the optical and structural properties of blue and green emitting plastic scintillators

Authors: Vladimir Baranov, Yuri Davydov, Rudolph Erasmus, Chamunorwa O Kureba, Nthabiseng Lekalakala, Thabo C Masuku, Joyful E Mdhluli, Bruce Mellado, Gaogalalwe Mokgatitswane, Elias Sideras-Haddad, Ilya Vasilyev, Petr N Zhmurin

Abstract: We report on the optical and structural properties of plastic scintillators irradiated with neutron beams produced by the IBR-2 reactor of the Frank Laboratory of Neutron Physics in JINR, Dubna. Blue UPS-923A and green plastic scintillators were irradiated with neutron fluence ranging from 10$^{13}$ to 10$^{17}$ n/cm$^2$. Discolouring in the plastic scintillators was observed after irradiation. Th… ▽ More We report on the optical and structural properties of plastic scintillators irradiated with neutron beams produced by the IBR-2 reactor of the Frank Laboratory of Neutron Physics in JINR, Dubna. Blue UPS-923A and green plastic scintillators were irradiated with neutron fluence ranging from 10$^{13}$ to 10$^{17}$ n/cm$^2$. Discolouring in the plastic scintillators was observed after irradiation. The effects of radiation damage on the optical and structural properties of the samples were characterized by conducting light yield, light transmission, light fluorescence and Raman spectroscopy studies. The results showed that neutron radiation induced damage in the material. The disappearance of the Raman peak features in green scintillators at frequencies of 1165.8, 1574.7 and 1651.2 cm$^{-1}$ revealed significant structural alterations due to neutron bombardment. Losses in fluorescence intensity, light yield and light transmission in the plastic scintillators were observed. △ Less

Submitted 11 October, 2018; originally announced October 2018.

Comments: 19 pages, 9 figures

Report number: ICPP-05

Journal ref: Nuclear Inst. and Methods in Physics Research, B 436C (2018) pp. 236-243

Suppression of the slow component of BaF$_{2}$ crystal luminescence with a thin multilayer filter

Authors: A. M. Artikov, V. Baranov, J. A. Budagov, A. N. Chivanov, Yuri Davydov, E. N. Eliseev, E. A. Garibin, V. V. Glagolev, A. V. Mihailov, P. A. Rodnyi, V. V. Terechschenko, I. I. Vasilyev

Abstract: The fast component of the barium fluoride (BaF$_{2}$) crystal luminescence with the emission peak at 220 nm allows those crystals to be employed in fast calorimeters operating in harsh radiation environment. However, the slow component with the emission peak at 330 nm and about 85\% of the total emission light could create big problems when working at a high radiation rate. In this work we repor… ▽ More The fast component of the barium fluoride (BaF$_{2}$) crystal luminescence with the emission peak at 220 nm allows those crystals to be employed in fast calorimeters operating in harsh radiation environment. However, the slow component with the emission peak at 330 nm and about 85\% of the total emission light could create big problems when working at a high radiation rate. In this work we report results of tests of multilayer filters that can suppress luminescence in the range from 250 nm to 400 nm, which covers most of the BaF$_{2}$ slow component luminescence. The filters are made by spraying layers of rare earth oxides on a quartz glass substrate. Filters typically comprise 200-220 layers. A few filters were prepared by spraying thin layers on quartz glass. The filters have a peak transmittance of about 70-80\% in the range of 200-250 nm. Measurements of the light output of the BaF$_{2}$ crystal with and without a filter between the crystal readout end and the PMT demonstrate substancial suppression of the slow component. To our knowledge, this kind of filters are produced and tested for the first time. △ Less

Submitted 5 September, 2018; originally announced September 2018.

Journal ref: J.Phys.Conf.Ser. 1162 (2019) no.1, 012028

Quality Assurance on Un-Doped CsI Crystals for the Mu2e Experiment

Authors: N. Atanov, V. Baranov, J. Budagov, Yu. I. Davydov, V. Glagolev, V. Tereshchenko, Z. Usubov, F. Cervelli, S. Di Falco, S. Donati, L. Morescalchi, E. Pedreschi, G. Pezzullo, F. Raffaelli, F. Spinella, F. Colao, M. Cordelli, G. Corradi, E. Diociaiuti, R. Donghia, S. Giovannella, F. Happacher, M. Martini, S. Miscetti, M. Ricci , et al. (12 additional authors not shown)

Abstract: The Mu2e experiment is constructing a calorimeter consisting of 1,348 undoped CsI crystals in two disks. Each crystal has a dimension of 34 x 34 x 200 mm, and is readout by a large area silicon PMT array. A series of technical specifications was defined according to physics requirements. Preproduction CsI crystals were procured from three firms: Amcrys, Saint-Gobain and Shanghai Institute of Ceram… ▽ More The Mu2e experiment is constructing a calorimeter consisting of 1,348 undoped CsI crystals in two disks. Each crystal has a dimension of 34 x 34 x 200 mm, and is readout by a large area silicon PMT array. A series of technical specifications was defined according to physics requirements. Preproduction CsI crystals were procured from three firms: Amcrys, Saint-Gobain and Shanghai Institute of Ceramics. We report the quality assurance on crystal's scintillation properties and their radiation hardness against ionization dose and neutrons. With a fast decay time of 30 ns and a light output of more than 100 p.e./MeV measured with a bi-alkali PMT, undoped CsI crystals provide a cost-effective solution for the Mu2e experiment. △ Less

Submitted 21 February, 2018; originally announced February 2018.

Comments: 7 pages, 16 figures, published in IEEE TNS NS (2018)

Journal ref: IEEE TRANSACTIONS ON NUCLEAR SCIENCE, VOL. 65, NO. 2, FEBRUARY 2018

Design and status of the Mu2e crystal calorimeter

Authors: N. Atanov, V. Baranov, J. Budagov, Yu. I. Davydov, V. Glagolev, V. Tereshchenko, Z. Usubov, F. Cervelli, S. Di Falco, S. Donati, L. Morescalchi, E. Pedreschi, G. Pezzullo, F. Raffaelli, F. Spinella, F. Colao, M. Cordelli, G. Corradi, E. Diociaiuti, R. Donghia, S. Giovannella, F. Happacher, M. Martini, S. Miscetti, M. Ricci , et al. (10 additional authors not shown)

Abstract: The Mu2e experiment at Fermilab searches for the charged-lepton flavour violating (CLFV) conversion of a negative muon into an electron in the field of an aluminum nucleus, with a distinctive signature of a mono-energetic electron of energy slightly below the muon rest mass (104.967 MeV). The Mu2e goal is to improve by four orders of magnitude the search sensitivity with respect to the previous ex… ▽ More The Mu2e experiment at Fermilab searches for the charged-lepton flavour violating (CLFV) conversion of a negative muon into an electron in the field of an aluminum nucleus, with a distinctive signature of a mono-energetic electron of energy slightly below the muon rest mass (104.967 MeV). The Mu2e goal is to improve by four orders of magnitude the search sensitivity with respect to the previous experiments. Any observation of a CLFV signal will be a clear indication of new physics. The Mu2e detector is composed of a tracker, an electro- magnetic calorimeter and an external veto for cosmic rays surrounding the solenoid. The calorimeter plays an important role in providing particle identification capabilities, a fast online trigger filter, a seed for track reconstruction while working in vacuum, in the presence of 1 T axial magnetic field and in an harsh radiation environment. The calorimeter requirements are to provide a large acceptance for 100 MeV electrons and reach at these energies: (a) a time resolution better than 0.5 ns; (b) an energy resolution < 10% and (c) a position resolution of 1 cm. The calorimeter design consists of two disks, each one made of 674 undoped CsI crystals read by two large area arrays of UV-extended SiPMs. We report here the construction and test of the Module-0 prototype. The Module-0 has been exposed to an electron beam in the energy range around 100 MeV at the Beam Test Facility in Frascati. Preliminary results of timing and energy resolution at normal incidence are shown. A discussion of the technical aspects of the calorimeter engineering is also reported in this paper. △ Less

Submitted 18 February, 2018; originally announced February 2018.

Comments: 8 pages, 16 figures, submitted to IEEE

The Mu2e Calorimeter Final Technical Design Report

Authors: N. Atanov, V. Baranov, J. Budagov, S. Ceravolo, F. Cervelli, F. Colao, M. Cordelli, G. Corradi, E. Dane, Y. Davydov, S. Di Falco, S. Donati, E. Diociaiuti, R. Donghia, B. Echenard, K. Flood, S. Giovannella, V. Glagolev, F. Grancagnolo, F. Happacher, D. Hitlin, M. Martini, S. Miscetti, T. Miyashita, L. Morescalchi , et al. (15 additional authors not shown)

Abstract: Since the first version of the Mu2e TDR released at the beginning of 2015, the Mu2e Calorimeter system has undergone a long list of changes to arrive to its final design. These changes were primarily caused by two reasons: (i) the technology choice between the TDR proposed solution of BaF2 crystals readout with solar blind Avalanche Photodiodes (APDs) and the backup option of CsI crystals readout… ▽ More Since the first version of the Mu2e TDR released at the beginning of 2015, the Mu2e Calorimeter system has undergone a long list of changes to arrive to its final design. These changes were primarily caused by two reasons: (i) the technology choice between the TDR proposed solution of BaF2 crystals readout with solar blind Avalanche Photodiodes (APDs) and the backup option of CsI crystals readout with Silicon Photomultipliers (SiPM) has been completed and (ii) the channels numbering, the mechanical system and the readout electronics were substantially modified while proceeding with engineering towards the final project. This document updates the description of the calorimeter system adding the most recent engineering drawings and tecnical progresses. △ Less

Submitted 18 February, 2018; originally announced February 2018.

Comments: TDR

Design, status and perspective of the Mu2e crystal calorimeter

Authors: N. Atanov, V. Baranov, J. Budagov, F. Cervelli, F. Colao, E. Diociaiuti, M. Cordelli, G. Corradi, E. Danè, Yu. Davydov, S. Donati, R. Donghia, S. Di Falco, B. Echenard, L. Morescalchi, S. Giovannella, V. Glagolev, F. Grancagnolo, F. Happacher, D. Hitlin, M. Martini, S. Miscetti, T. Miyashita, L. Morescalchi, P. Murat , et al. (11 additional authors not shown)

Abstract: The Mu2e experiment at Fermilab will search for the charged lepton flavor violating process of neutrino-less $μ\to e$ coherent conversion in the field of an aluminum nucleus. Mu2e will reach a single event sensitivity of about $2.5\cdot 10^{-17}$ that corresponds to four orders of magnitude improvements with respect to the current best limit. The detector system consists of a straw tube tracker an… ▽ More The Mu2e experiment at Fermilab will search for the charged lepton flavor violating process of neutrino-less $μ\to e$ coherent conversion in the field of an aluminum nucleus. Mu2e will reach a single event sensitivity of about $2.5\cdot 10^{-17}$ that corresponds to four orders of magnitude improvements with respect to the current best limit. The detector system consists of a straw tube tracker and a crystal calorimeter made of undoped CsI coupled with Silicon Photomultipliers. The calorimeter was designed to be operable in a harsh environment where about 10 krad/year will be delivered in the hottest region and work in presence of 1 T magnetic field. The calorimeter role is to perform $μ$/e separation to suppress cosmic muons mimiking the signal, while providing a high level trigger and a seeding the track search in the tracker. In this paper we present the calorimeter design and the latest R$\&$D results. △ Less

Submitted 18 April, 2018; v1 submitted 9 January, 2018; originally announced January 2018.

Comments: 4 pages, conference proceeding for a presentation held at TIPP'2017. To be published on Springer Proceedings in Physics

The Mu2e undoped CsI crystal calorimeter

Authors: N. Atanov, V. Baranov, J. Budagov, F. Cervelli, F. Colao, M. Cordelli, G. Corradi, Yu. I. Davydov, S. Di Falco, E. Diociaiuti, S. Donati, R. Donghia, B. Echenard, S. Giovannella, V. Glagolev, F. Grancagnolo, F. Happacher, D. G. Hitlin, M. Martini, S. Miscetti, T. Miyashita, L. Morescalchi, P. Murat, E. Pedreschi, G. Pezzullo , et al. (10 additional authors not shown)

Abstract: The Mu2e experiment at Fermilab will search for Charged Lepton Flavor Violating conversion of a muon to an electron in an atomic field. The Mu2e detector is composed of a tracker, an electromagnetic calorimeter and an external system, surrounding the solenoid, to veto cosmic rays. The calorimeter plays an important role to provide: a) excellent particle identification capabilities; b) a fast trigg… ▽ More The Mu2e experiment at Fermilab will search for Charged Lepton Flavor Violating conversion of a muon to an electron in an atomic field. The Mu2e detector is composed of a tracker, an electromagnetic calorimeter and an external system, surrounding the solenoid, to veto cosmic rays. The calorimeter plays an important role to provide: a) excellent particle identification capabilities; b) a fast trigger filter; c) an easier tracker track reconstruction. Two disks, located downstream of the tracker, contain 674 pure CsI crystals each. Each crystal is read out by two arrays of UV-extended SiPMs. The choice of the crystals and SiPMs has been finalized after a thorough test campaign. A first small scale prototype consisting of 51 crystals and 102 SiPM arrays has been exposed to an electron beam at the BTF (Beam Test Facility) in Frascati. Although the readout electronics were not the final, results show that the current design is able to meet the timing and energy resolution required by the Mu2e experiment. △ Less

Submitted 22 February, 2018; v1 submitted 7 January, 2018; originally announced January 2018.

Comments: 6 pages, 8 figures, proceedings of the "Calorimetry for the high energy frontier (CHEF17)" conference, 2-6 October 2017, Lyon, France

Report number: FERMILAB-CONF-18-007-E

Journal ref: 2018_JINST_13_C02037

Light yield and radiation hardness studies of scintillator strips with a filler

Authors: A. Artikov, V. Baranov, Yu. Budagov, M. Bulavin, D. Chokheli, Yu. I Davydov, V. Glagolev, Yu. Kharzheev, V. Kolomoets, A. Simonenko, Z. Usubov, I. Vasiljev

Abstract: Detectors based on polystyrene scintillator strips with WLS fiber readout are widely used to register charged particles in many high-energy physics experiments. The fibers are placed into grooves or holes along the strip. The detection efficiency of these devices can be significantly increased by improving the optical contact between the scintillator and the fiber by adding an optical filler into… ▽ More Detectors based on polystyrene scintillator strips with WLS fiber readout are widely used to register charged particles in many high-energy physics experiments. The fibers are placed into grooves or holes along the strip. The detection efficiency of these devices can be significantly increased by improving the optical contact between the scintillator and the fiber by adding an optical filler into the groove/hole. This work is devoted to the study of the light yield of a 5-m-long scintillator strip with a 1.2-mm-diameter Kuraray Y11(200)~MC WLS fiber inserted into the strip's co-extruded hole filled with synthetic silicon resin SKTN-MED(E). The light yield was studied using cosmic muons and a $^{60}$Co radioactive source. Radiation hardness study of viscous fillers and short strip samples were performed on the IBR-2 pulsed research reactor of fast neutrons at JINR. △ Less

Submitted 6 August, 2018; v1 submitted 30 November, 2017; originally announced November 2017.

Comments: minor changes - authors sequence, added annotation on figure 9(b)

Report number: NIMA 62032

Quality Assurance on a custom SiPMs array for the Mu2e experiment

Authors: N. Atanov, V. Baranov, J. Budagov, Yu. I. Davydov, V. Glagolev, V. Tereshchenko, Z. Usubov, F. Cervelli, S. Di Falco, S. Donati, L. Morescalchi, E. Pedreschi, G. Pezzullo, F. Raffaelli, F. Spinella, F. Colao, M. Cordelli, G. Corradi, E. Diociaiuti, R. Donghia, S. Giovannella, F. Happacher, M. Martini, S. Miscetti, M. Ricci , et al. (10 additional authors not shown)

Abstract: The Mu2e experiment at Fermilab will search for the coherent $μ\to e$ conversion on aluminum atoms. The detector system consists of a straw tube tracker and a crystal calorimeter. A pre-production of 150 Silicon Photomultiplier arrays for the Mu2e calorimeter has been procured. A detailed quality assur- ance has been carried out on each SiPM for the determination of its own operation voltage, gain… ▽ More The Mu2e experiment at Fermilab will search for the coherent $μ\to e$ conversion on aluminum atoms. The detector system consists of a straw tube tracker and a crystal calorimeter. A pre-production of 150 Silicon Photomultiplier arrays for the Mu2e calorimeter has been procured. A detailed quality assur- ance has been carried out on each SiPM for the determination of its own operation voltage, gain, dark current and PDE. The measurement of the mean-time-to-failure for a small random sample of the pro-production group has been also completed as well as the determination of the dark current increase as a function of the ioninizing and non-ioninizing dose. △ Less

Submitted 20 November, 2017; originally announced November 2017.

Comments: 4 pages, 10 figures, conference proceeding for NSS-MIC 2017

Photoelectron Yields of Scintillation Counters with Embedded Wavelength-Shifting Fibers Read Out With Silicon Photomultipliers

Authors: Akram Artikov, Vladimir Baranov, Gerald C. Blazey, Ningshun Chen, Davit Chokheli, Yuri Davydov, E. Craig Dukes, Alexsander Dychkant, Ralf Ehrlich, Kurt Francis, M. J. Frank, Vladimir Glagolev, Craig Group, Sten Hansen, Stephen Magill, Yuri Oksuzian, Anna Pla-Dalmau, Paul Rubinov, Aleksandr Simonenko, Enhao Song, Steven Stetzler, Yongyi Wu, Sergey Uzunyan, Vishnu Zutshi

Abstract: Photoelectron yields of extruded scintillation counters with titanium dioxide coating and embedded wavelength shifting fibers read out by silicon photomultipliers have been measured at the Fermilab Test Beam Facility using 120\,GeV protons. The yields were measured as a function of transverse, longitudinal, and angular positions for a variety of scintillator compositions and reflective coating mix… ▽ More Photoelectron yields of extruded scintillation counters with titanium dioxide coating and embedded wavelength shifting fibers read out by silicon photomultipliers have been measured at the Fermilab Test Beam Facility using 120\,GeV protons. The yields were measured as a function of transverse, longitudinal, and angular positions for a variety of scintillator compositions and reflective coating mixtures, fiber diameters, and photosensor sizes. Timing performance was also studied. These studies were carried out by the Cosmic Ray Veto Group of the Mu2e collaboration as part of their R\&D program. △ Less

Submitted 5 February, 2018; v1 submitted 19 September, 2017; originally announced September 2017.

Comments: To be published in NIM

Report number: FERMILAB-PUB-17-386-PPD

Journal ref: Nucl.Instrum.Meth. A 890 (2018) 84-95

The calorimeter of the Mu2e experiment at Fermilab

Authors: N. Atanov, V. Baranov, J. Budagov, F. Cervelli, F. Colao, M. Cordelli, G. Corradi, E. Dané, Yu. I. Davydov, S. Di Falco, E. Diociaiuti, S. Donati, R. Donghia, B. Echenard, K. Flood, S. Giovannella, V. Glagolev, F. Grancagnolo, F. Happacher, D. G. Hitlin, M. Martini, S. Miscetti, T. Miyashita, L. Morescalchi, P. Murat , et al. (12 additional authors not shown)

Abstract: The Mu2e experiment at Fermilab looks for Charged Lepton Flavor Violation (CLFV) improving by 4 orders of magnitude the current experimental sensitivity for the muon to electron conversion in a muonic atom. A positive signal could not be explained in the framework of the current Standard Model of particle interactions and therefore would be a clear indication of new physics. In 3 years of data tak… ▽ More The Mu2e experiment at Fermilab looks for Charged Lepton Flavor Violation (CLFV) improving by 4 orders of magnitude the current experimental sensitivity for the muon to electron conversion in a muonic atom. A positive signal could not be explained in the framework of the current Standard Model of particle interactions and therefore would be a clear indication of new physics. In 3 years of data taking, Mu2e is expected to observe less than one background event mimicking the electron coming from muon conversion. Achieving such a level of background suppression requires a deep knowledge of the experimental apparatus: a straw tube tracker, measuring the electron momentum and time, a cosmic ray veto system rejecting most of cosmic ray background and a pure CsI crystal calorimeter, that will measure time of flight, energy and impact position of the converted electron. The calorimeter has to operate in a harsh radiation environment, in a 10-4 Torr vacuum and inside a 1 T magnetic field. The results of the first qualification tests of the calorimeter components are reported together with the energy and time performances expected from the simulation and measured in beam tests of a small scale prototype. △ Less

Submitted 27 January, 2017; originally announced January 2017.

Comments: 11 pages, 7 figures, proceedings of 14th Topical Seminar on Innovative Particle and Radiation Detectors (IPRD16) 3 - 6 October 2016 Siena, Italy, Journal of Instrumentation, Volume 12, January 2017 http://stacks.iop.org/1748-0221/12/i=01/a=C01061

Design and status of the Mu2e electromagnetic calorimeter

Authors: N. Atanov, V. Baranov, J. Budagov, R. Carosi, F. Cervelli, F. Colao, M. Cordelli, G. Corradi, E. Dane', Yu. I. Davydov, S. Di Falco, S. Donati, R. Donghia, B. Echenard, K. Flood, S. Giovannella, V. Glagolev, F. Grancagnolo, F. Happacher, D. G. Hitlin, M. Martini, S. Miscetti, T. Miyashita, L. Morescalchi, P. Murat , et al. (11 additional authors not shown)

Abstract: The Mu2e experiment at Fermilab aims at measuring the neutrinoless conversion of a negative muon into an electron and reach a single event sensitivity of 2.5x10^{-17} after three years of data taking. The monoenergetic electron produced in the final state, is detected by a high precision tracker and a crystal calorimeter, all embedded in a large superconducting solenoid (SD) surrounded by a cosmic… ▽ More The Mu2e experiment at Fermilab aims at measuring the neutrinoless conversion of a negative muon into an electron and reach a single event sensitivity of 2.5x10^{-17} after three years of data taking. The monoenergetic electron produced in the final state, is detected by a high precision tracker and a crystal calorimeter, all embedded in a large superconducting solenoid (SD) surrounded by a cosmic ray veto system. The calorimeter is complementary to the tracker, allowing an independent trigger and powerful particle identification, while seeding the track reconstruction and contributing to remove background tracks mimicking the signal. In order to match these requirements, the calorimeter should have an energy resolution of O(5)% and a time resolution better than 500 ps at 100 MeV. The baseline solution is a calorimeter composed of two disks of BaF2 crystals read by UV extended, solar blind, Avalanche Photodiode (APDs), which are under development from a JPL, Caltech, RMD consortium. In this paper, the calorimeter design, the R&D studies carried out so far and the status of engineering are described. A backup alternative setup consisting of a pure CsI crystal matrix read by UV extended Hamamatsu MPPC's is also presented. △ Less

Submitted 8 August, 2016; originally announced August 2016.

Comments: 5 pages, 6 figures

Journal ref: Nucl. Instrum. Meth. A 824 (2016) 695

Design, status and test of the Mu2e crystal calorimeter

Authors: N. Atanov, V. Baranov, J. Budagov, R. Carosi, F. Cervelli, F. Colao, M. Cordelli, G. Corradi, E. Danè, Y. I. Davydov, S. Di Falco, S. Donati, R. Donghia, B. Echenard, K. Flood, S. Giovannella, V. Glagolev, F. Grancagnolo, F. Happacher, D. G. Hitlin, M. Martini, S. Miscetti, T. Miyashita, L. Morescalchi, P. Murat , et al. (11 additional authors not shown)

Abstract: The Mu2e experiment at Fermilab searches for the charged-lepton flavor violating neutrino-less conversion of a negative muon into an electron in the field of a aluminum nucleus. The dynamic of such a process is well modeled by a two-body decay, resulting in a monoenergetic electron with an energy slightly below the muon rest mass (104.967 MeV). The calorimeter of this experiment plays an important… ▽ More The Mu2e experiment at Fermilab searches for the charged-lepton flavor violating neutrino-less conversion of a negative muon into an electron in the field of a aluminum nucleus. The dynamic of such a process is well modeled by a two-body decay, resulting in a monoenergetic electron with an energy slightly below the muon rest mass (104.967 MeV). The calorimeter of this experiment plays an important role to provide excellent particle identification capabilities and an online trigger filter while aiding the track reconstruction capabilities. The baseline calorimeter configuration consists of two disks each made with about 700 undoped CsI crystals read out by two large area UV-extended Silicon Photomultipliers. These crystals match the requirements for stability of response, high resolution and radiation hardness. In this paper we present the final calorimeter design. △ Less

Submitted 1 July, 2016; v1 submitted 17 June, 2016; originally announced June 2016.

Energy and time resolution for a LYSO matrix prototype of the Mu2e experiment

Authors: N. Atanov, V. Baranov, F. Colao, M. Cordelli, G. Corradi, E. Dane`, Y. I. Davydov, K. Flood, S. Giovannella, V. Glagolev, F. Happacher, D. G. Hitlin, M. Martini, S. Miscetti, T. Miyashita, L. Morescalchi, P. Ott, G. Pezzullo, A. Saputi, I. Sarra, S. R. Soleti, G. Tassielli, V. Tereshchenko, A. Thomas

Abstract: We have measured the performances of a LYSO crystal matrix prototype tested with electron and photon beams in the energy range 60$-$450 MeV. This study has been carried out to determine the achievable energy and time resolutions for the calorimeter of the Mu2e experiment. We have measured the performances of a LYSO crystal matrix prototype tested with electron and photon beams in the energy range 60$-$450 MeV. This study has been carried out to determine the achievable energy and time resolutions for the calorimeter of the Mu2e experiment. △ Less

Submitted 30 May, 2016; originally announced May 2016.

Comments: 2 pages, 3 figures, 13th Pisa Meeting on Advanced Detectors

Journal ref: Nucl. Instr. Meth. A 824 (2016) 684

The increase of the light collection from scintillation strip with hole for WLS fiber using various types of fillers

Authors: A. Simonenko, A. Artikov, V. Baranov, J. Budagov, D. Chokheli, Yu. Davydov, V. Glagolev, Yu. Kharzheev, V. Kolomoetz, A. Shalyugin, V. Tereschenko

Abstract: The light collection of the extruded scintillator strip samples with WLS fibers placed in the longitudinal hole in the plates was measured. The holes were filled with various liquid fillers. Measurements were carried out under irradiation by cosmic muons. The method of pum** liquid filler with viscosity more than 10 Pa*s in the strip hole with WLS fiber inside was designed and successfully teste… ▽ More The light collection of the extruded scintillator strip samples with WLS fibers placed in the longitudinal hole in the plates was measured. The holes were filled with various liquid fillers. Measurements were carried out under irradiation by cosmic muons. The method of pum** liquid filler with viscosity more than 10 Pa*s in the strip hole with WLS fiber inside was designed and successfully tested. △ Less

Submitted 8 April, 2016; originally announced April 2016.

Comments: 8 pages, 6 figures, 2 tables

Optimization of light yield by injection of the optical filler into the co extruded hole of plastic scintillation bar with WLS fiber in it

Authors: A. Artikov, V. Baranov, Yu. Budagov, D. Chokheli, Yu. Davydov, V. Glagolev, Yu. Kharzheev, V. Kolomoetz, A. Shalugin, A. Simonenko, V. Tereshchenko

Abstract: Results of the measurements with cosmic muons for the light yield of 2-meter long extruded scintillation bar (strip) as a function of distance for different options for light collection technique are presented. Scintillation strip cross section geometry was a triangle made on polystyrene plastic scintillator with dopants of 2% PTP and 0.03% POPOP, extruded with 2.6 mm diameter hole and produced at… ▽ More Results of the measurements with cosmic muons for the light yield of 2-meter long extruded scintillation bar (strip) as a function of distance for different options for light collection technique are presented. Scintillation strip cross section geometry was a triangle made on polystyrene plastic scintillator with dopants of 2% PTP and 0.03% POPOP, extruded with 2.6 mm diameter hole and produced at ISMA (Kharkov, Ukraine). It was shown that the insertion of the optical transparent resin (BC 600 or CKTN MED(E)) by special technique into the co-extruded hole with 1.0 mm or 1.2 mm wave-length shifter (WLS) fiber Kuraray Y11 (200) MC in it significantly improves light collection by factor of 1.6...1.9 against of the 'dry' case. △ Less

Submitted 8 April, 2016; originally announced April 2016.

Report number: 1748-0221-11-05-T05003

Journal ref: Journal of Instrumentation, Volume 11, May 2016

Performance of Scintillator Counters with Silicon Photomultiplier Readout

Authors: Mu2e Collaboration Cosmic Ray Veto Group, A. Artikov, V. Baranov, D. Chokheli, Yu. I. Davydov, E. C. Dukes, R. Ehrlich, K. Francis, M. J. Frank, V. Glagolev, R. C. Group, S. Hansen, A. Hocker, Y. Oksuzian, P. Rubinov, E. Song, S. Uzunyan, Y. Wu

Abstract: The performance of scintillator counters with embedded wavelength-shifting fibers has been measured in the Fermilab Meson Test Beam Facility using 120 GeV protons. The counters were extruded with a titanium dioxide surface coating and two channels for fibers at the Fermilab NICADD facility. Each fiber end is read out by a 2*2 mm^2 silicon photomultiplier. The signals were amplified and digitized b… ▽ More The performance of scintillator counters with embedded wavelength-shifting fibers has been measured in the Fermilab Meson Test Beam Facility using 120 GeV protons. The counters were extruded with a titanium dioxide surface coating and two channels for fibers at the Fermilab NICADD facility. Each fiber end is read out by a 2*2 mm^2 silicon photomultiplier. The signals were amplified and digitized by a custom-made front-end electronics board. Combinations of 5*2 cm^2 and 6*2 cm^2 extrusion profiles with 1.4 and 1.8 mm diameter fibers were tested. The design is intended for the cosmic-ray veto detector for the Mu2e experiment at Fermilab. The light yield as a function of the transverse and longitudinal position of the beam will be given. △ Less

Submitted 1 November, 2015; originally announced November 2015.

Comments: Presentation at the DPF 2015 Meeting of the American Physical Society Division of Particles and Fields, Ann Arbor, Michigan, August 4-8, 2015

Measurement of time resolution of the Mu2e LYSO calorimeter prototype

Authors: N. Atanov, V. Baranov, F. Colao, M. Cordelli, G. Corradi, E. Dané, Yu. I. Davydov, K. Flood, S. Giovannella, V. Glagolev, F. Happacher, D. G. Hitlin, M. Martini, S. Miscetti, T. Miyashita, L. Morescalchi, G. Pezzullo, A. Saputi, I. Sarra, S. R. Soleti, G. Tassielli, V. Tereshchenko

Abstract: In this paper we present the time resolution measurements of the Lutetium-Yttrium Oxyorthosilicate (LYSO) calorimeter prototype for the Mu2e experiment. The measurements have been performed using the $e^-$ beam of the Beam Test Facility (BTF) in Frascati, Italy in the energy range from 100 to 400 MeV. The calorimeter prototype consisted of twenty five 30x30x130 mm$^3$, LYSO crystals read out by 10… ▽ More In this paper we present the time resolution measurements of the Lutetium-Yttrium Oxyorthosilicate (LYSO) calorimeter prototype for the Mu2e experiment. The measurements have been performed using the $e^-$ beam of the Beam Test Facility (BTF) in Frascati, Italy in the energy range from 100 to 400 MeV. The calorimeter prototype consisted of twenty five 30x30x130 mm$^3$, LYSO crystals read out by 10x10 mm$^2$ Hamamatsu Avalanche Photodiodes (APDs). The energy dependence of the measured time resolution can be parametrized as $σ_{t}(E)=a/\sqrt{E/\mathrm{GeV}} \oplus b$, with the stochastic and constant terms $a=(51\pm1)$ ps and $b=(10\pm4)$ ps, respectively. This corresponds to the time resolution of ($162\pm4$) ps at 100 MeV. △ Less

Submitted 11 January, 2016; v1 submitted 15 September, 2015; originally announced September 2015.

Comments: 18 pages, 14 figures, accepted for the journal Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment

Report number: FERMILAB-TM-2611-E

Journal ref: Nucl.Instrum.Meth. A812 (2016) 104-111

2-D straw detectors with high rate capability

Authors: N. A. Kuchinskiy, V. A. Baranov, V. N. Duginov, F. E. Zyazyulya, A. S. Korenchenko, A. O. Kolesnikov, N. P. Kravchuk, S. A. Movchan, A. I. Rudenko, V. S. Smirnov, N. V. Khomutov, V. A. Chekhovsky, A. S. Lobko, O. V. Misevich

Abstract: Precise measurement of straw axial coordinate (along the anode wire) with accuracy compatible with straw radial coordinate determination by drift time measurement and increase of straw detector rate capability by using straw cathode readout instead of anode readout are presented. Precise measurement of straw axial coordinate (along the anode wire) with accuracy compatible with straw radial coordinate determination by drift time measurement and increase of straw detector rate capability by using straw cathode readout instead of anode readout are presented. △ Less

Submitted 18 February, 2015; originally announced February 2015.

Comments: 16 pages, 10 figures

Muon (g-2) Technical Design Report

Authors: J. Grange, V. Guarino, P. Winter, K. Wood, H. Zhao, R. M. Carey, D. Gastler, E. Hazen, N. Kinnaird, J. P. Miller, J. Mott, B. L. Roberts, J. Benante, J. Crnkovic, W. M. Morse, H. Sayed, V. Tishchenko, V. P. Druzhinin, B. I. Khazin, I. A. Koop, I. Logashenko, Y. M. Shatunov, E. Solodov, M. Korostelev, D. Newton , et al. (176 additional authors not shown)

Abstract: The Muon (g-2) Experiment, E989 at Fermilab, will measure the muon anomalous magnetic moment a factor-of-four more precisely than was done in E821 at the Brookhaven National Laboratory AGS. The E821 result appears to be greater than the Standard-Model prediction by more than three standard deviations. When combined with expected improvement in the Standard-Model hadronic contributions, E989 should… ▽ More The Muon (g-2) Experiment, E989 at Fermilab, will measure the muon anomalous magnetic moment a factor-of-four more precisely than was done in E821 at the Brookhaven National Laboratory AGS. The E821 result appears to be greater than the Standard-Model prediction by more than three standard deviations. When combined with expected improvement in the Standard-Model hadronic contributions, E989 should be able to determine definitively whether or not the E821 result is evidence for physics beyond the Standard Model. After a review of the physics motivation and the basic technique, which will use the muon storage ring built at BNL and now relocated to Fermilab, the design of the new experiment is presented. This document was created in partial fulfillment of the requirements necessary to obtain DOE CD-2/3 approval. △ Less

Submitted 11 May, 2018; v1 submitted 27 January, 2015; originally announced January 2015.

Comments: 666 pages

Report number: FERMILAB-FN-0992-E

The use of segmented cathode of a drift tube for designing a track detector with a high rate capability

Authors: N. A. Kuchinskiy, V. A. Baranov, V. N. Duginov, F. E. Zyazyulya, A. S. Korenchenko, A. O. Kolesnikov, N. P. Kravchuk, S. A. Movchan, A. I. Rudenko, V. S. Smirnov, N. V. Khomutov, V. A. Chekhovsky

Abstract: Detector rate capability is one of the main parameters for designing a new detector for high energy physics due to permanent rise of the beam luminosity of modern accelerators. One of the widely used detectors for particle track reconstruction is a straw detector based on drift tubes. The rate capability of such detectors is limited by the parameters of readout electronics. The traditional method… ▽ More Detector rate capability is one of the main parameters for designing a new detector for high energy physics due to permanent rise of the beam luminosity of modern accelerators. One of the widely used detectors for particle track reconstruction is a straw detector based on drift tubes. The rate capability of such detectors is limited by the parameters of readout electronics. The traditional method of increasing detector rate capability is increasing their granularity (a number of readout channels) by reducing the straw diameter and/or by dividing the straw anode wire into two parts (for decreasing the rate per readout channel). A new method of designing straw detectors with a high rate capability is presented and tested. The method is based on dividing the straw cathode into parts and independent readout of each part. △ Less

Submitted 18 October, 2013; originally announced October 2013.

Comments: 10 pages, 8 figures

Study of 50 GeV proton beam focusing by novel crystal device

Authors: A. G. Afonin, V. I. Baranov, V. T. Baranov, G. I. Britvich, A. P. Bugorskiy, M. K. Bulgakov, Yu. A. Chesnokov, P. N. Chirkov, A. A. Durum, I. S. Lobanov, A. N. Lunkov, A. V. Lutchev, V. A. Maisheev, Yu. E. Sandomirskiy, A. V. Skleznev, A. A. Yanovich, I. A. Yazynin

Abstract: The bent crystals are applied on large accelerators to deflect particle beams in process of extraction and collimation. Recently the proposals of fixed target researches in the LHC are formulated. For realization of this program not only deflection but also focusing the LHC beam by bent crystals can be used. In the given work experimental results on 50 GeV proton beam focusing with the help of nov… ▽ More The bent crystals are applied on large accelerators to deflect particle beams in process of extraction and collimation. Recently the proposals of fixed target researches in the LHC are formulated. For realization of this program not only deflection but also focusing the LHC beam by bent crystals can be used. In the given work experimental results on 50 GeV proton beam focusing with the help of novel crystal device are reported. The positive property of this device is opportunity to work near the circulating beam of an accelerator, including the LHC. △ Less

Submitted 4 October, 2012; originally announced October 2012.

Journal ref: IHEP 2012-15; Pisma Zh.Eksp.Teor.Fiz. 96(2012) 470-473

Device on basis of a bent crystal with variable curvature for particle beams steering in accelerators

Authors: A. G. Afonin, V. T. Baranov, M. K. Bulgakov, Yu. A. Chesnokov, P. N. Chirkov, E. V. Lobanova, I. S. Lobanov, A. N. Lunkov, V. A. Maisheev, I. V. Poluektov, Yu. E. Sandomirskiy, I. A. Yazynin

Abstract: Recently it was proposed to apply a bent single crystal with decreasing curvature instead of uniform bending for improvement of extraction and collimation of a circulating beam in particle accelerators. In the given paper created crystal devices with a variable curvature, realizing this idea are described. Results of measurement of curvature along a crystal plate are informed. It is shown, that wi… ▽ More Recently it was proposed to apply a bent single crystal with decreasing curvature instead of uniform bending for improvement of extraction and collimation of a circulating beam in particle accelerators. In the given paper created crystal devices with a variable curvature, realizing this idea are described. Results of measurement of curvature along a crystal plate are informed. It is shown, that with the help of the developed devices it is possible to carry out also high energy beam focusing. The mathematical description of this process is proposed. △ Less

Submitted 26 March, 2012; originally announced March 2012.

Comments: 9 pages, 9 figs

Studies and application of bent crystals for beam steering at 70-GeV IHEP accelerator

Authors: A. G. Afonin, V. T. Baranov, G. I. Britvich, V. N. Chepegin, Yu. A. Chesnokov, V. I. Kotov, V. A. Maisheev, V. I. Terekhov, I. A. Yazynin

Abstract: This report overviews studies accomplished in the U70 proton synchrotron of IHEP-Protvino during the recent two decades. Major attention is paid to a routine application of bent crystals for beam extraction from the machine. It has been confirmed experimentally that efficiency of beam extraction with a crystal deflector of around 85% is well feasible for a proton beam with intensity up to 1012 pro… ▽ More This report overviews studies accomplished in the U70 proton synchrotron of IHEP-Protvino during the recent two decades. Major attention is paid to a routine application of bent crystals for beam extraction from the machine. It has been confirmed experimentally that efficiency of beam extraction with a crystal deflector of around 85% is well feasible for a proton beam with intensity up to 1012 protons per cycle. Another trend is to use bent crystals for halo collimation in a high energy collider. New promising options emerge for, say, LHC and ILC based on the "volume reflection" effect, which has been discovered recently in machine study runs at U70 of IHEP (50 GeV) and SPS of CERN (400 GeV). △ Less

Submitted 24 October, 2011; originally announced October 2011.

Comments: 12 pages, 14 figures

Journal ref: Int.J.Mod.Phys. A25S1 (2010) 86-97

Modern success in channeling study and applications at the U-70 accelerator of IHEP

Authors: Yu. A. Chesnokov, A. G. Afonin, V. T. Baranov, G. I. Britvich, P. N. Chirkov, V. A. Maisheev, V. I. Terekhov, I. A. Yazynin

Abstract: The article presents an overview of the results obtained at U-70 accelerator of IHEP to use bent crystals for beam control of high energy protons. Considerable attention is paid to practical application of crystals to create new modes of beam extraction from the accelerator to ensure experiments on high energy physics. It was shown that with the crystal deflectors the efficiency reached ~ 90% with… ▽ More The article presents an overview of the results obtained at U-70 accelerator of IHEP to use bent crystals for beam control of high energy protons. Considerable attention is paid to practical application of crystals to create new modes of beam extraction from the accelerator to ensure experiments on high energy physics. It was shown that with the crystal deflectors the efficiency reached ~ 90% with intensity up to 10^12 protons per cycle of U-70. The results of experiments on the use of crystals to enhance the effectiveness of the absorption of the unused beam, as well as the use of crystals for collimation of beam halo are presented. Perspectives to use of bent crystals to extract low energy light ions from U-70 are also discussed. △ Less

Submitted 17 October, 2011; originally announced October 2011.

Comments: 8 pages,14 figures. arXiv admin note: substantial text overlap with arXiv:1102.2711

Journal ref: Nuovo Cimento V 34 C, N4, 407-415,2011

Using the cathode surface of straw tube for measuring the track coordinates along the wire

Authors: V. A. Baranov, B. A. Chekhovskiy, N. P. Kravchuk, A. S. Korenchenko, N. A. Kuchinskiy, N. V. Khomutov, S. A. Movchan, V. S. Smirnov, F. E. Zyazyulya

Abstract: The coordinate detectors based on straw tubes provide a high accuracy of the radial coordinate measurement using the drift time and a small amount of matter in the way of the measured particles. However, the measurement of the coordinate along the wire constitutes a problem. This paper proposes a method for measuring the hit coordinate along the wire with an accuracy better than 1 mm in a straw tu… ▽ More The coordinate detectors based on straw tubes provide a high accuracy of the radial coordinate measurement using the drift time and a small amount of matter in the way of the measured particles. However, the measurement of the coordinate along the wire constitutes a problem. This paper proposes a method for measuring the hit coordinate along the wire with an accuracy better than 1 mm in a straw tube detector using the signals from the cathodes of the detector. △ Less

Submitted 27 January, 2012; v1 submitted 11 May, 2011; originally announced May 2011.

Comments: 5 pages, 5 figures, submitted to Instrum. Exper. Tech.(Pribory i Tekhnika Eksperimenta)

Collimation of a Circulating Beam in the U_70 Synchrotron by Use of Reflections in Axially - Oriented Crystals

Authors: A. G. Afonin, V. T. Baranov, M. K. Bulgakov, I. S. Voinov, V. N. Gorlov, I. V. Ivanova, D. M. Krylov, A. N. Lunn'kov, V. A. Maisheev, S. F. Reshetnikov, D. A. Savin, E. A. Syshchikov, V. I. Terekhov, Yu. A. Chesnokov, P. N. Chirkov, I. A. Yazynin

Abstract: The possibilities of the extraction and collimation of a circulating beam by a new method due to the reflection of particles in crystals with axial orientation were experimentally investigated in the Fall-2010 run at the U_70 synchrotron. Such crystals have positive features, because the axial potential is five times larger than the planar potential. It has been shown that the collimation efficien… ▽ More The possibilities of the extraction and collimation of a circulating beam by a new method due to the reflection of particles in crystals with axial orientation were experimentally investigated in the Fall-2010 run at the U_70 synchrotron. Such crystals have positive features, because the axial potential is five times larger than the planar potential. It has been shown that the collimation efficiency can reach 90% due to axial effects in the crystal. Losses of the circulating beam on a collimator have been reduced by several times; this makes it possible to suppress the muon jet near the steel collimator of the circulating beam. △ Less

Submitted 28 March, 2011; originally announced March 2011.

Comments: 6 pages, 7 figures

Journal ref: JETP Lett.93:187-190,2011

Crystal-Assisted Beam Extraction and Collimation at the U-70 Circular Accelerator

Authors: A. G. Afonin, V. T. Baranov, S. Bellucci, S. A. Belov, S. Bini, V. N. Gorlov, G. Giannini, A. D. Ermolaev, I. V. Ivanova, D. M. Krylov, V. A. Maisheev, D. A. Savin, E. A. Syshchikov, V. I. Terekhov, V. N. Chepegin, Yu. A. Chesnokov, P. N. Chirkov, I. A. Yazynin

Abstract: New crystal technique - array of bent strips and a fan-type reflector, based on thin straight plates - have been used for research of extraction and collimation a circulating beam in the U-70 accelerator at the energy 50 GeV and 1.3 GeV. It is shown, that new devices can effectively steer a beam in a wide energy range. For protons with energy 50 GeV efficiency of extraction and collimation about 9… ▽ More New crystal technique - array of bent strips and a fan-type reflector, based on thin straight plates - have been used for research of extraction and collimation a circulating beam in the U-70 accelerator at the energy 50 GeV and 1.3 GeV. It is shown, that new devices can effectively steer a beam in a wide energy range. For protons with energy 50 GeV efficiency of extraction and collimation about 90 % has been achieved which is record for this method. Reduction of particle losses in 2-3 times was observed also in accelerator at application of different crystals in comparison with the usual one-stage collimation scheme of beam with a steel absorber. △ Less

Submitted 14 February, 2011; originally announced February 2011.

Comments: 14 pages, 12 figures

Report number: IHEP preprint 2010-12

Journal ref: Instruments and Experimental Techniques, Vol.54, 1, 2011

Extraction of the Proton Beam from the 70 GeV IHEP Accelerator

Authors: A. G. Afonin, V. T. Baranov, V. M. Biryukov, I. M. Ivanov, A. A. Kardash, V. I. Kotov, V. A. Maisheev, V. I. Terekhov, E. F. Troyanov, Yu. S. Fedotov, V. N. Chepegin, Yu. A. Chesnokov

Abstract: This paper presents the physical background for particle extraction from IHEP accelerator using short bent silicon crystals, analyses the results of the studies, considers in detail the regime of simultaneous work of crystal extraction and several internal targets. It is experimentally shown that the use of short crystals allows the extraction of beams with intensity of 10e12 proton/cycle with e… ▽ More This paper presents the physical background for particle extraction from IHEP accelerator using short bent silicon crystals, analyses the results of the studies, considers in detail the regime of simultaneous work of crystal extraction and several internal targets. It is experimentally shown that the use of short crystals allows the extraction of beams with intensity of 10e12 proton/cycle with efficiency of 85%. △ Less

Submitted 30 August, 2005; originally announced August 2005.

Comments: Presented at CARE-HHH-APD Mini-Workshop on Crystal Collimation in Hadron Storage Rings (CC-2005), Geneva, Switzerland, 7-8 Mar 2005

Accelerator Tests of Crystal Undulators

Authors: V. M. Biryukov, A. G. Afonin, V. T. Baranov, S. Baricordi, S. Bellucci, G. I. Britvich, V. N. Chepegin, Yu. A. Chesnokov, C. Balasubramanian, G. Giannini, V. Guidi, Yu. M. Ivanov, V. I. Kotov, A. Kushnirenko, V. A. Maisheev, C. Malagu, G. Martinelli, E. Milan, A. A. Petrunin, V. A. Pikalov, V. V. Skorobogatov, M. Stefancich, V. I. Terekhov, F. Tombolini, U. I. Uggerhoj

Abstract: A series of Silicon crystal undulator samples were produced based on the approach presented in PRL 90 (2003) 034801, with the periods of undulation from 0.1 mm to 1 mm, and the number of periods on the order of 10. The samples were characterized by X-rays, revealing the sine-like shape of the crystal lattice in the bulk. Next step in the characterization has been the channeling tests done with 7… ▽ More A series of Silicon crystal undulator samples were produced based on the approach presented in PRL 90 (2003) 034801, with the periods of undulation from 0.1 mm to 1 mm, and the number of periods on the order of 10. The samples were characterized by X-rays, revealing the sine-like shape of the crystal lattice in the bulk. Next step in the characterization has been the channeling tests done with 70 GeV protons, where good channeling properties of the undulated Silicon lattice have been observed. The photon radiation tests of crystal undulators with high energy positrons are in progress on several locations: IHEP Protvino, LNF Frascati, and CERN SPS. The progress in the experimental activities and the predictions from detailed simulations are reported. △ Less

Submitted 24 December, 2004; originally announced December 2004.

Comments: Invited talk at the NATO ARW "Advanced Photon Sources and Their Application" (Nor Hamberd, Armenia August 29 &#8211; September 02, 2004)

Proton Extraction from IHEP Accelerator Using Bent Crystals

Authors: A. G. Afonin, V. T. Baranov, V. M. Biryukov, V. N. Chepegin, Yu. A. Chesnokov, Yu. S. Fedotov, A. A. Kardash, V. I. Kotov, V. A. Maisheev, V. I. Terekhov, E. F. Troyanov

Abstract: IHEP Protvino has pioneered the wide practical use of bent crystals as optical elements in high-energy beams for beam extraction and deflection on permanent basis since 1989. In the course of IHEP experiments, crystal channeling has been developed into efficient instrument for particle steering at accelerators, working in predictable, reliable manner with beams of very high intensity over years.… ▽ More IHEP Protvino has pioneered the wide practical use of bent crystals as optical elements in high-energy beams for beam extraction and deflection on permanent basis since 1989. In the course of IHEP experiments, crystal channeling has been developed into efficient instrument for particle steering at accelerators, working in predictable, reliable manner with beams of very high intensity over years. Crystal systems extract 70 GeV protons from IHEP main ring with efficiency of 85% at intensity of 1.E12, basing on multi-pass mechanism of channeling proposed theoretically and realised experimentally at IHEP. Today, six locations on the IHEP 70-GeV main ring of the accelerator facility are equipped by crystal extraction systems, serving mostly for routine applications rather than for research and allowing a simultaneous run of several particle physics experiments, thus significantly enriching the IHEP physics program. The long successful history of large-scale crystal exploitation at IHEP should help to incorporate channeling crystals into accelerator systems worldwide in order to create unique systems for beam delivery. We report recent results from the research and exploitation of crystal extraction systems at IHEP. △ Less

Submitted 23 December, 2004; originally announced December 2004.

Comments: Invited talk at the International workshop "Relativistic Channeling and Related Coherent Phenomena", Frascati (Rome) 23-26 March 2004

Advances in the theory and methods of computational vibronic spectroscopy

Authors: S. A. Astakhov, V. I. Baranov, L. A. Gribov

Abstract: We discuss semiempirical approaches and parametric methods developed for modeling molecular vibronic spectra. These methods, together with databases of molecular fragments, have proved efficient and flexible for solving various problems ranging from detailed interpretation of conventional vibronic spectra and calculation of radiative transition probabilities to direct simulations of dynamical (t… ▽ More We discuss semiempirical approaches and parametric methods developed for modeling molecular vibronic spectra. These methods, together with databases of molecular fragments, have proved efficient and flexible for solving various problems ranging from detailed interpretation of conventional vibronic spectra and calculation of radiative transition probabilities to direct simulations of dynamical (time-resolved) spectra and spectrochemical analysis of individual substances and mixtures. A number of specific examples and applications presented here show the potential of the semiempirical approach for predictive calculations of spectra and solution of inverse spectral problems. It is noteworthy that these advances provide computational insights into develo** theories of photoinduced isomer transformations and nonradiative transitions in polyatomic molecules and molecular ensembles, theory of new methods for standardless quantitative spectral analysis. △ Less

Submitted 26 December, 2003; originally announced December 2003.

Comments: to appear in "Advances in Laser and Optics Research", Nova Science Publishers, 2004

Design, Commissioning and Performance of the PIBETA Detector at PSI

Authors: E. Frlez, D. Pocanic, K. A. Assamagan, Yu. Bagaturia, V. A. Baranov, W. Bertl, Ch. Broennimann, M. A. Bychkov, J. F. Crawford, M. Daum, Th. Fluegel, R. Frosch, R. Horisberger, V. A. Kalinnikov, V. V. Karpukhin, N. V. Khomutov, J. E. Koglin, A. S. Korenchenko, S. M. Korenchenko, T. Kozlowski, B. Krause, N. P. Kravchuk, N. A. Kuchinsky, W. Li, D. W. Lawrence , et al. (19 additional authors not shown)

Abstract: We describe the design, construction and performance of the PIBETA detector built for the precise measurement of the branching ratio of pion beta decay, pi+ -> pi0 e+ nu, at the Paul Scherrer Institute. The central part of the detector is a 240-module spherical pure CsI calorimeter covering 3*pi sr solid angle. The calorimeter is supplemented with an active collimator/beam degrader system, an ac… ▽ More We describe the design, construction and performance of the PIBETA detector built for the precise measurement of the branching ratio of pion beta decay, pi+ -> pi0 e+ nu, at the Paul Scherrer Institute. The central part of the detector is a 240-module spherical pure CsI calorimeter covering 3*pi sr solid angle. The calorimeter is supplemented with an active collimator/beam degrader system, an active segmented plastic target, a pair of low-mass cylindrical wire chambers and a 20-element cylindrical plastic scintillator hodoscope. The whole detector system is housed inside a temperature-controlled lead brick enclosure which in turn is lined with cosmic muon plastic veto counters. Commissioning and calibration data were taken during two three-month beam periods in 1999/2000 with pi+ stop** rates between 1.3*E3 pi+/s and 1.3*E6 pi+/s. We examine the timing, energy and angular detector resolution for photons, positrons and protons in the energy range of 5-150 MeV, as well as the response of the detector to cosmic muons. We illustrate the detector signatures for the assorted rare pion and muon decays and their associated backgrounds. △ Less

Submitted 4 December, 2003; originally announced December 2003.

Comments: 117 pages, 48 Postscript figures, 5 tables, Elsevier LaTeX, submitted to Nucl. Instrum. Meth. A

Journal ref: Nucl.Instrum.Meth.A526:300-347,2004

Simulation of Time-Resolved Vibronic Spectra and the possibility of analyzing molecules with similar apectral properties

Authors: S. A. Astakhov, V. I. Baranov

Abstract: The possibility of using time-resolved vibronic spectroscopy for spectral analysis of mixtures of chemical compounds with similar optical properties, when traditional methods are inefficient, is demonstrated by using the method of computer simulation. The analysis is carried out by the example of molecules of a series of polyenes (butadiene, hexatraene, octatetraene, decapentaene, and decatetrae… ▽ More The possibility of using time-resolved vibronic spectroscopy for spectral analysis of mixtures of chemical compounds with similar optical properties, when traditional methods are inefficient, is demonstrated by using the method of computer simulation. The analysis is carried out by the example of molecules of a series of polyenes (butadiene, hexatraene, octatetraene, decapentaene, and decatetraene), their various cis- and trans-rotational isomers, and phenyl-substituted polyenes. Ranges of relative concentrations of molecules similar in their spectral properties, where reliable interpretation of time-resolved spectra of mixtures and both qualitative and quantitative analyses are possible, are determined. The use of computer simulation methods for oprimizing full-scale experiments in femtosecond spectroscopy is shown to hold much promise. △ Less

Submitted 4 October, 2002; originally announced October 2002.

Journal ref: Optics and Spectroscopy, Vol.92, No.1, 2002, pp.20-26

Modeling of the time-resolved vibronic spectra of polyatomic molecules: the formulation of the problem and analysis of kinetic equations

Authors: S. A. Astakhov, V. I. Baranov

Abstract: A semiempirical parametric method is proposed for modeling three-dimensional (time-resolved) vibronic spectra of polyatomic molecules. The method is based on the use of the fragment approach in the formation of molecular models for excited electronic states and parametrization of these molecular fragments by modeling conventional (one-dimensional) absorption and fluorescence spectra of polyatomi… ▽ More A semiempirical parametric method is proposed for modeling three-dimensional (time-resolved) vibronic spectra of polyatomic molecules. The method is based on the use of the fragment approach in the formation of molecular models for excited electronic states and parametrization of these molecular fragments by modeling conventional (one-dimensional) absorption and fluorescence spectra of polyatomic molecules. All matrix elements that are required for calculation of the spectra can be found by the methods developed. The time dependencies of the populations of a great number (>10^3) of vibronic levels can be most conveniently found by using the iterative numerical method of integration of kinetic equations. Convenient numerical algorithms and specialized software for PC are developed. Computer experiments showed the possibility of the real-time modeling of three-dimensional spectra of polyatomic molecules containing several tens of atoms. △ Less

Submitted 4 October, 2002; originally announced October 2002.

Journal ref: Optics and Spectroscopy, Vol.90, No.2, 2001, pp.199-206