-
Tectonics of Cerberus Fossae unveiled by marsquakes
Authors:
Simon C. Stähler,
Anna Mittelholz,
Clément Perrin,
Taichi Kawamura,
Doyeon Kim,
Martin Knapmeyer,
Géraldine Zenhäusern,
John Clinton,
Domenico Giardini,
Philippe Lognonné,
W. Bruce Banerdt
Abstract:
The InSight mission has measured Mars' seismicity since February 2018 and has allowed to investigate tectonics on another planet. Seismic data shows that most of the widely distributed surface faults are not seismically active, and that seismicity is mostly originating from a single graben structure, the Cerberus Fossae. We show that both major families of marsquakes characterized by low and high…
▽ More
The InSight mission has measured Mars' seismicity since February 2018 and has allowed to investigate tectonics on another planet. Seismic data shows that most of the widely distributed surface faults are not seismically active, and that seismicity is mostly originating from a single graben structure, the Cerberus Fossae. We show that both major families of marsquakes characterized by low and high frequency content, LF and HF events respectively, are located on central and eastern parts of this graben system. LF hypocenters are located at 15-50 km depth and the spectral character suggests a structurally weak, potentially warm source region consistent with recent volcanic activity at those depths. HF marsquakes occur in the brittle, shallow part of the crust and might originate in fault planes associated with the graben flanks. Estimated magnitudes are between 2.8 and 3.8, resulting in a total seismic moment release within Cerberus Fossae of 1.4-5.6 $\times10^{15}$ Nm/yr, or at least half of the observed value of the entire planet. Our findings confirm that Cerberus Fossae represents a unique tectonic setting shaped by current day volcanic processes, with implications for minimum local heat flow.
△ Less
Submitted 30 June, 2022;
originally announced June 2022.
-
The InSight HP$^3$ Penetrator (Mole) on Mars: Soil Properties Derived From the Penetration Attempts and Related Activities
Authors:
T. Spohn,
T. L. Hudson,
E. Marteau,
M. Golombek,
M. Grott,
T. Wippermann,
K. S. Ali,
C. Schmelzbach,
S. Kedar,
K. Hurst,
A. Trebi-Ollennu,
V. Ansan,
J. Garvin,
J. Knollenberg,
N. Mueller,
S. Piqeux,
R. Lichtenheldt,
C. Krause,
C. Fantinati,
N. Brinkman,
D. Sollberger,
P. Delage,
C. Vrettos,
S. Reershemius,
L. Wisniewski
, et al. (9 additional authors not shown)
Abstract:
The NASA InSight Lander on Mars includes the Heat Flow and Physical Properties Package HP$^3$ to measure the surface heat flow of the planet. The package uses temperature sensors that would have been brought to the target depth of 3--5 m by a small penetrator, nicknamed the mole. The mole requiring friction on its hull to balance remaining recoil from its hammer mechanism did not penetrate to the…
▽ More
The NASA InSight Lander on Mars includes the Heat Flow and Physical Properties Package HP$^3$ to measure the surface heat flow of the planet. The package uses temperature sensors that would have been brought to the target depth of 3--5 m by a small penetrator, nicknamed the mole. The mole requiring friction on its hull to balance remaining recoil from its hammer mechanism did not penetrate to the targeted depth. Instead, by precessing about a point midway along its hull, it carved a 7 cm deep and 5-6 cm wide pit and reached a depth of initially 31 cm. The root cause of the failure - as was determined through an extensive, almost two years long campaign - was a lack of friction in an unexpectedly thick cohesive duricrust. During the campaign -- described in detail in this paper -- the mole penetrated further aided by friction applied using the scoop at the end of the robotic Instrument Deployment Arm and by direct support by the latter. The mole finally reached a depth of 40 cm, bringing the mole body 1--2 cm below the surface. The penetration record of the mole and its thermal sensors were used to measure thermal and mechanical soil parameters such as the thermal conductivity and the penetration resistance of the duricrust and its cohesion. The hammerings of the mole were recorded by the seismometer SEIS and the signals could be used to derive a P-wave velocity and a S-wave velocity and elastic moduli representative of the topmost tens of cm of the regolith. The combined data were used to derive a model of the regolith that has an about 20 cm thick duricrust underneath a 1 cm thick unconsolidated layer of sand mixed with dust and above another 10 cm of unconsolidated sand. Underneath the latter, a layer more resistant to penetration and possibly consisting of debris from a small impact crater is inferred.
△ Less
Submitted 8 December, 2021;
originally announced December 2021.
-
A study of daytime convective vortices and turbulence in the martian Planetary Boundary Layer based on half-a-year of InSight atmospheric measurements and Large-Eddy Simulations
Authors:
Aymeric Spiga,
Naomi Murdoch,
Ralph Lorenz,
François Forget,
Claire Newman,
Sébastien Rodriguez,
Jorge Pla-Garcia,
Daniel Viúdez-Moreiras,
Don Banfield,
Clément Perrin,
Nils T. Mueller,
Mark Lemmon,
Ehouarn Millour,
W. Bruce Banerdt
Abstract:
Studying the atmospheric Planetary Boundary Layer (PBL) is crucial to understand the climate of a planet. The meteorological measurements by the instruments onboard InSight at a latitude of 4.5$^{\circ}$N make a uniquely rich dataset to study the active turbulent dynamics of the daytime PBL on Mars. Here we use the high-sensitivity continuous pressure, wind, temperature measurements in the first 4…
▽ More
Studying the atmospheric Planetary Boundary Layer (PBL) is crucial to understand the climate of a planet. The meteorological measurements by the instruments onboard InSight at a latitude of 4.5$^{\circ}$N make a uniquely rich dataset to study the active turbulent dynamics of the daytime PBL on Mars. Here we use the high-sensitivity continuous pressure, wind, temperature measurements in the first 400 sols of InSight operations (from northern late winter to midsummer) to analyze wind gusts, convective cells and vortices in Mars' daytime PBL. We compare InSight measurements to turbulence-resolving Large-Eddy Simulations (LES). The daytime PBL turbulence at the InSight landing site is very active, with clearly identified signatures of convective cells and a vast population of 6000 recorded vortex encounters, adequately represented by a power-law with a 3.4 exponent. While the daily variability of vortex encounters at InSight can be explained by the statistical nature of turbulence, the seasonal variability is positively correlated with ambient wind speed, which is supported by LES. However, wind gustiness is positively correlated to surface temperature rather than ambient wind speed and sensible heat flux, confirming the radiative control of the daytime martian PBL; and fewer convective vortices are forming in LES when the background wind is doubled. Thus, the long-term seasonal variability of vortex encounters at the InSight landing site is mainly controlled by the advection of convective vortices by ambient wind speed. Typical tracks followed by vortices forming in the LES show a similar distribution in direction and length as orbital imagery.
△ Less
Submitted 4 November, 2020; v1 submitted 3 May, 2020;
originally announced May 2020.
-
On-deck seismology: Lessons from InSight for future planetary seismology
Authors:
Mark P. Panning,
W. Tom Pike,
Philippe Lognonné,
W. Bruce Banerdt,
Naomi Murdoch,
Don Banfield,
Constantinos Charalambous,
Sharon Kedar,
Ralph D. Lorenz,
Angela G. Marusiak,
John B. McClean,
Ceri Nunn,
Simon C. Stähler,
Alexander E. Stott,
Tristram Warren
Abstract:
Before deploying to the surface of Mars, the short-period (SP) seismometer of the InSight mission operated on deck for a total of 48 hours. This dataset can be used to understand how deck-mounted seismometers can be used in future landed missions to Mars, Europa, and other planetary bodies. While operating on deck, the SP seismometer showed signals comparable to the Viking-2 seismometer near 3 Hz…
▽ More
Before deploying to the surface of Mars, the short-period (SP) seismometer of the InSight mission operated on deck for a total of 48 hours. This dataset can be used to understand how deck-mounted seismometers can be used in future landed missions to Mars, Europa, and other planetary bodies. While operating on deck, the SP seismometer showed signals comparable to the Viking-2 seismometer near 3 Hz where the sensitivity of the Viking instrument peaked. Wind sensitivity showed similar patterns to the Viking instrument, although amplitudes on InSight were ~80% larger for a given wind velocity. However, during the low wind evening hours the instrument noise levels at frequencies between 0.1 and 1 Hz were comparable to quiet stations on Earth, although deployment to the surface below the Wind and Thermal Shield lowered installation noise by roughly 40 dB in acceleration power. With the observed noise levels and estimated seismicity rates for Mars, detection probability for quakes for a deck-mounted instrument are low enough that up to years of on-deck recordings may be necessary to observe an event. Because the noise is dominated by wind acting on the lander, though, deck-mounted seismometers may be more practical for deployment on airless bodies, and it is important to evaluate the seismicity of the target body and the specific design of the lander. Detection probabilities for operation on Europa reach over 99% for some proposed seismicity models for a similar duration of operation if noise levels are comparable to low-wind time periods on Mars.
△ Less
Submitted 19 March, 2020;
originally announced March 2020.
-
Estimations of the seismic pressure noise on Mars determined from Large Eddy Simulations and demonstration of pressure decorrelation techniques for the InSight mission
Authors:
Naomi Murdoch,
Balthasar Kenda,
Taichi Kawamura,
Aymeric Spiga,
Philippe Lognonné,
David Mimoun,
William B. Banerdt
Abstract:
The atmospheric pressure fluctuations on Mars induce an elastic response in the ground that creates a ground tilt, detectable as a seismic signal on the InSight seismometer SEIS. The seismic pressure noise is modeled using Large Eddy Simulations of the wind and surface pressure at the InSight landing site and a Green's function ground deformation approach that is subsequently validated via a detai…
▽ More
The atmospheric pressure fluctuations on Mars induce an elastic response in the ground that creates a ground tilt, detectable as a seismic signal on the InSight seismometer SEIS. The seismic pressure noise is modeled using Large Eddy Simulations of the wind and surface pressure at the InSight landing site and a Green's function ground deformation approach that is subsequently validated via a detailed comparison with two other methods based on Sorrells' theory (Sorrels 1971; Sorrels et al. 1971). The horizontal acceleration as a result of the ground tilt due to the LES turbulence-induced pressure fluctuations are found to be typically ~2 - 40 nm/s^2 in amplitude, whereas the direct horizontal acceleration is two orders of magnitude smaller and is thus negligible in comparison. The vertical accelerations are found to be ~0.1 - 6 nm/s^2 in amplitude.
We show that under calm conditions, a single-pressure measurement is representative of the large-scale pressure field (to a distance of several kilometers), particularly in the prevailing wind direction. However, during windy conditions, small-scale turbulence results in a reduced correlation between the pressure signals, and the single-pressure measurement becomes less representative of the pressure field. Nonetheless, the correlation between the seismic signal and the pressure signal is found to be higher for the windiest period because the seismic pressure noise reflects the atmospheric structure close to the seismometer. In the same way that we reduce the atmospheric seismic signal by making use of a pressure sensor that is part of the InSight APSS (Auxiliary Payload Sensor Suite), we also the use the synthetic noise data obtained from the LES pressure field to demonstrate a decorrelation strategy.
△ Less
Submitted 19 April, 2017;
originally announced April 2017.
-
Evaluating the wind-induced mechanical noise on the InSight seismometers
Authors:
Naomi Murdoch,
David Mimoun,
Raphael F. Garcia,
Willian Rapin,
Taichi Kawamuea,
Philippe Lognonné,
Don Banfield,
William B. Banerdt
Abstract:
The SEIS (Seismic Experiment for Interior Structures) instrument onboard the InSight mission to Mars is the critical instrument for determining the interior structure of Mars, the current level of tectonic activity and the meteorite flux. Meeting the performance requirements of the SEIS instrument is vital to successfully achieve these mission objectives. Here we analyse in-situ wind measurements…
▽ More
The SEIS (Seismic Experiment for Interior Structures) instrument onboard the InSight mission to Mars is the critical instrument for determining the interior structure of Mars, the current level of tectonic activity and the meteorite flux. Meeting the performance requirements of the SEIS instrument is vital to successfully achieve these mission objectives. Here we analyse in-situ wind measurements from previous Mars space missions to understand the wind environment that we are likely to encounter on Mars, and then we use an elastic ground deformation model to evaluate the mechanical noise contributions on the SEIS instrument due to the interaction between the Martian winds and the InSight lander. Lander mechanical noise maps that will be used to select the best deployment site for SEIS once the InSight lander arrives on Mars are also presented. We find the lander mechanical noise may be a detectable signal on the InSight seismometers. However, for the baseline SEIS deployment position, the noise is expected to be below the total noise requirement >97% of the time and is, therefore, not expected to endanger the InSight mission objectives.
△ Less
Submitted 13 December, 2016;
originally announced December 2016.
-
Seismometer Detection of Dust Devil Vortices by Ground Tilt
Authors:
Ralph D. Lorenz,
Sharon Kedar,
Naomi Murdoch,
Philippe Lognonné,
Taichi Kawamura,
David Mimoun,
W. Bruce Banerdt
Abstract:
We report seismic signals on a desert playa caused by convective vortices and dust devils. The long-period (10-100s) signatures, with tilts of ~10$^{-7}$ radians, are correlated with the presence of vortices, detected with nearby sensors as sharp temporary pressure drops (0.2-1 mbar) and solar obscuration by dust. We show that the shape and amplitude of the signals, manifesting primarily as horizo…
▽ More
We report seismic signals on a desert playa caused by convective vortices and dust devils. The long-period (10-100s) signatures, with tilts of ~10$^{-7}$ radians, are correlated with the presence of vortices, detected with nearby sensors as sharp temporary pressure drops (0.2-1 mbar) and solar obscuration by dust. We show that the shape and amplitude of the signals, manifesting primarily as horizontal accelerations, can be modeled approximately with a simple quasi-static point-load model of the negative pressure field associated with the vortices acting on the ground as an elastic half space. We suggest the load imposed by a dust devil of diameter D and core pressure ΔPo is ~(π/2)ΔPoD$^2$, or for a typical terrestrial devil of 5 m diameter and 2 mbar, about the weight of a small car. The tilt depends on the inverse square of distance, and on the elastic properties of the ground, and the large signals we observe are in part due to the relatively soft playa sediment and the shallow installation of the instrument. Ground tilt may be a particularly sensitive means of detecting dust devils. The simple point-load model fails for large dust devils at short ranges, but more elaborate models incorporating the work of Sorrells (1971) may explain some of the more complex features in such cases, taking the vortex winds and ground velocity into account. We discuss some implications for the InSight mission to Mars.
△ Less
Submitted 20 November, 2015;
originally announced November 2015.
