-
Piezoelectric microresonators for sensitive spin detection
Authors:
Cecile Skoryna Kline,
Jorge Monroy-Ruz,
Krishna C Balram
Abstract:
Piezoelectric microresonators are indispensable in wireless communications, and underpin radio frequency filtering in mobile phones. These devices are usually analyzed in the quasi-(electro)static regime with the magnetic field effectively ignored. On the other hand, at GHz frequencies and especially in piezoelectric devices exploiting strong dimensional confinement of acoustic fields, the surface…
▽ More
Piezoelectric microresonators are indispensable in wireless communications, and underpin radio frequency filtering in mobile phones. These devices are usually analyzed in the quasi-(electro)static regime with the magnetic field effectively ignored. On the other hand, at GHz frequencies and especially in piezoelectric devices exploiting strong dimensional confinement of acoustic fields, the surface magnetic fields ($B_{1}$) can be significant. This $B_1$ field, which oscillates at GHz frequencies, but is confined to $μ$m-scale wavelengths provides a natural route to efficiently interface with nanoscale spin systems. We show through scaling arguments that $B_1{\propto}f^2$ for tightly focused acoustic fields at a given operation frequency $f$. We demonstrate the existence of these surface magnetic fields in a proof-of-principle experiment by showing excess power absorption at the focus of a surface acoustic wave (SAW), when a polished Yttrium-Iron-Garnet (YIG) sphere is positioned in the evanescent field, and the magnon resonance is tuned across the SAW transmission. Finally, we outline the prospects for sensitive spin detection using small mode volume piezoelectric microresonators, including the feasibility of electrical detection of single spins at cryogenic temperatures.
△ Less
Submitted 3 May, 2024;
originally announced May 2024.
-
Crosstalk-mitigated microelectronic control for optically-active spins
Authors:
Hao-Cheng Weng,
John G. Rarity,
Krishna C. Balram,
Joe A. Smith
Abstract:
To exploit the sub-nanometre dimensions of qubits for large-scale quantum information processing, corresponding control architectures require both energy and space efficiency, with the on-chip footprint of unit-cell electronics ideally micron-scale. However, the spin coherence of qubits in close packing is severely deteriorated by microwave crosstalk from neighbouring control sites. Here, we prese…
▽ More
To exploit the sub-nanometre dimensions of qubits for large-scale quantum information processing, corresponding control architectures require both energy and space efficiency, with the on-chip footprint of unit-cell electronics ideally micron-scale. However, the spin coherence of qubits in close packing is severely deteriorated by microwave crosstalk from neighbouring control sites. Here, we present a crosstalk-mitigation scheme using foundry microelectronics, to address solid-state spins at sub-100 um spacing without the need for qubit-detuning. Using nitrogen-vacancy centres in nanodiamonds as qubit prototypes, we first demonstrate 10 MHz Rabi oscillation at milliwatts of microwave power. Implementing the active cancellation, we then prove that the crosstalk field from neighbouring lattice sites can be reduced to undetectable levels. We finally extend the scheme to show increased qubit control, tripling the spin coherence under crosstalk mitigation. Compatible with integrated optics, our results present a step towards scalable control across quantum platforms using silicon microelectronics.
△ Less
Submitted 5 April, 2024;
originally announced April 2024.
-
Robotic vectorial field alignment for spin-based quantum sensors
Authors:
Joe A. Smith,
Dandan Zhang,
Krishna C. Balram
Abstract:
Develo** practical quantum technologies will require the exquisite manipulation of fragile systems in a robust and repeatable way. As quantum technologies move towards real world applications, from biological sensing to communication in space, increasing experimental complexity introduces constraints that can be alleviated by the introduction of new technologies. Robotics has shown tremendous pr…
▽ More
Develo** practical quantum technologies will require the exquisite manipulation of fragile systems in a robust and repeatable way. As quantum technologies move towards real world applications, from biological sensing to communication in space, increasing experimental complexity introduces constraints that can be alleviated by the introduction of new technologies. Robotics has shown tremendous progress in realising increasingly smart, autonomous and highly dexterous machines. Here, we demonstrate that a robotic arm equipped with a magnet can sensitise an NV centre quantum magnetometer in challenging conditions unachievable with standard techniques. We generate vector magnetic field with $1^\circ$ angular and 0.1 mT amplitude accuracy and determine the orientation of a single stochastically-aligned spin-based sensor in a constrained physical environment. Our work opens up the prospect of integrating robotics across many quantum degrees of freedom in constrained settings, allowing for increased prototy** speed, control, and robustness in quantum technology applications.
△ Less
Submitted 16 June, 2023; v1 submitted 26 May, 2023;
originally announced May 2023.
-
Low-loss GHz frequency phononic integrated circuits in Gallium Nitride for compact radio-frequency acoustic wave devices
Authors:
Mahmut Bicer,
Krishna C Balram
Abstract:
Guiding and manipulating GHz frequency acoustic waves in $μ$m-scale waveguides and resonators opens up new degrees of freedom to manipulate radio frequency (RF) signals in chip-scale platforms. A critical requirement for enabling high-performance devices is the demonstration of low acoustic dissipation in these highly confined geometries. In this work, we show that gallium nitride (GaN) on silicon…
▽ More
Guiding and manipulating GHz frequency acoustic waves in $μ$m-scale waveguides and resonators opens up new degrees of freedom to manipulate radio frequency (RF) signals in chip-scale platforms. A critical requirement for enabling high-performance devices is the demonstration of low acoustic dissipation in these highly confined geometries. In this work, we show that gallium nitride (GaN) on silicon carbide (SiC) supports low-loss acoustics by demonstrating acoustic microring resonators with frequency-quality factor ($fQ$) products approaching $4*10^{13}$ Hz at 3.4 GHz. The low dissipation measured exceeds the $fQ$ bound set by the simplified isotropic Akhiezer material dam** limit of GaN. We use this low-loss acoustics platform to demonstrate spiral delay lines with on-chip RF delays exceeding 2.5 $μ$s, corresponding to an equivalent electromagnetic delay of $\approx$ 750 m. Given GaN is a well-established semiconductor with high electron mobility, our work opens up the prospect of engineering traveling wave acoustoelectric interactions in $μ$m-scale waveguide geometries, with associated implications for chip-scale RF signal processing.
△ Less
Submitted 26 May, 2023;
originally announced May 2023.
-
Heterogeneous integration of solid state quantum systems with a foundry photonics platform
Authors:
Hao-Cheng Weng,
Jorge Monroy-Ruz,
Jonathan C. F. Matthews,
John G. Rarity,
Krishna C. Balram,
Joe A. Smith
Abstract:
Diamond colour centres are promising optically-addressable solid state spins that can be matter-qubits, mediate deterministic interaction between photons and act as single photon emitters. Useful quantum computers will comprise millions of logical qubits. To become useful in constructing quantum computers, spin-photon interfaces must therefore become scalable and be compatible with mass-manufactur…
▽ More
Diamond colour centres are promising optically-addressable solid state spins that can be matter-qubits, mediate deterministic interaction between photons and act as single photon emitters. Useful quantum computers will comprise millions of logical qubits. To become useful in constructing quantum computers, spin-photon interfaces must therefore become scalable and be compatible with mass-manufacturable photonics and electronics. Here we demonstrate heterogeneous integration of NV centres in nanodiamond with low-fluorescence silicon nitride photonics from a standard 180 nm CMOS foundry process. Nanodiamonds are positioned over pre-defined sites in a regular array on a waveguide, in a single post-processing step. Using an array of optical fibres, we excite NV centres selectively from an array of six integrated nanodiamond sites, and collect the photoluminescence (PL) in each case into waveguide circuitry on-chip. We verify single photon emission by an on-chip Hanbury Brown and Twiss cross-correlation measurement, which is a key characterisation experiment otherwise typically performed routinely with discrete optics. Our work opens up a simple and effective route to simultaneously address large arrays of individual optically-active spins at scale, without requiring discrete bulk optical setups. This is enabled by the heterogeneous integration of NV centre nanodiamonds with CMOS photonics.
△ Less
Submitted 20 April, 2023;
originally announced April 2023.
-
Quantifying and mitigating optical surface loss in suspended GaAs photonic integrated circuits
Authors:
Robert Thomas,
Haoyang Li,
Jude Laverock,
Krishna C. Balram
Abstract:
Understanding and mitigating optical loss is critical to the development of high-performance photonic integrated circuits (PICs). Especially in high refractive index contrast compound semiconductor (III-V) PICs, surface absorption and scattering can be a significant loss mechanism, and needs to be suppressed. Here, we quantify the optical propagation loss due to surface state absorption in a suspe…
▽ More
Understanding and mitigating optical loss is critical to the development of high-performance photonic integrated circuits (PICs). Especially in high refractive index contrast compound semiconductor (III-V) PICs, surface absorption and scattering can be a significant loss mechanism, and needs to be suppressed. Here, we quantify the optical propagation loss due to surface state absorption in a suspended GaAs photonic integrated circuits (PIC) platform, probe its origins using X-ray photoemission spectroscopy (XPS) and spectroscopic ellipsometry (SE), and show that it can be mitigated by surface passivation using alumina ($Al_{2}O_{3}$). We also explore potential routes towards achieving passive device performance comparable to state-of-the-art silicon PICs
△ Less
Submitted 17 April, 2023; v1 submitted 30 March, 2023;
originally announced March 2023.
-
Timing constraints due to real-time graph traversal algorithms on incomplete cluster states in photonic measurement-based quantum computing
Authors:
John R. Scott,
Krishna C. Balram
Abstract:
Understanding the computational overheads imposed by classical control systems on quantum computing platforms becomes critically important as these quantum machines grow in scale and complexity. In this work, we calculate the overheads imposed by the implementation of real-time graph traversal algorithms needed to find computational paths through incomplete cluster states for the implementation of…
▽ More
Understanding the computational overheads imposed by classical control systems on quantum computing platforms becomes critically important as these quantum machines grow in scale and complexity. In this work, we calculate the overheads imposed by the implementation of real-time graph traversal algorithms needed to find computational paths through incomplete cluster states for the implementation of one-qubit gates; a necessary requirement for a realistic implementation of photonic measurement-based quantum computing. By implementing two different algorithms, a global breadth-first search that searches the entire cluster state and an incremental version that traverses a narrow sub-section of the cluster state, we analyze the tradeoff between the accuracy of finding viable paths and the speed at which this operation can be performed, which constrains the overall photonic clock cycle of the system. We also outline the broader implications of our results for implementing classical control systems for measurement-based photonic quantum computing.
△ Less
Submitted 31 August, 2022;
originally announced August 2022.
-
Using electrical resistance asymmetries to infer the geometric shapes of foundry patterned nanophotonic structures
Authors:
Vinita Mittal,
Krishna C. Balram
Abstract:
While silicon photonics has leveraged the nanofabrication tools and techniques from the microelectronics industry, it has also inherited the metrological methods from the same. Photonics fabrication is inherently different from microelectronics in its intrinsic sensitivity to 3D shape and geometry, especially in a high-index contrast platform like silicon-on-insulator. In this work, we show that e…
▽ More
While silicon photonics has leveraged the nanofabrication tools and techniques from the microelectronics industry, it has also inherited the metrological methods from the same. Photonics fabrication is inherently different from microelectronics in its intrinsic sensitivity to 3D shape and geometry, especially in a high-index contrast platform like silicon-on-insulator. In this work, we show that electrical resistance measurements can in principle be used to infer the geometry of such nanophotonic structures and reconstruct the micro-loading curves of foundry etch processes. We implement our ideas to infer 3D geometries from a standard silicon photonics foundry and discuss some of the potential sources of error that need to be calibrated out to improve the reconstruction accuracy.
△ Less
Submitted 7 April, 2022;
originally announced April 2022.
-
Piezo-optomechanical signal transduction using Lamb wave supermodes in a suspended Gallium Arsenide photonic integrated circuits platform
Authors:
Ankur Khurana,
Pisu Jiang,
Krishna C. Balram
Abstract:
Piezoelectric optomechanical platforms present one of the most promising routes towards efficient transduction of signals from the microwave to the optical frequency domains. New device architectures need to be developed in order to achieve the stringent requirements for building efficient quantum transducers. In this work, we utilize the mechanical supermode principle to improve the overall micro…
▽ More
Piezoelectric optomechanical platforms present one of the most promising routes towards efficient transduction of signals from the microwave to the optical frequency domains. New device architectures need to be developed in order to achieve the stringent requirements for building efficient quantum transducers. In this work, we utilize the mechanical supermode principle to improve the overall microwave to optical transduction efficiency, by fabricating Lamb wave resonators that are hybridized with the mechanical breathing modes of a rib waveguide in a suspended gallium arsenide (GaAs) photonic integrated circuits (PIC) platform. Combining the strong elasto-optic interactions available in GaAs with the increased phonon injection efficiency enabled by this architecture, we demonstrate signal transduction up to 7 GHz, and an increase in transduction efficiency by $\approx$ 25$\times$ for the hybridized mode ($f_m\approx$ 2 GHz), using this approach. We also outline routes for improving device performance to enable quantum transduction within this platform.
△ Less
Submitted 28 September, 2022; v1 submitted 17 March, 2022;
originally announced March 2022.
-
Gallium nitride phononic integrated circuits for future RF front-ends
Authors:
Mahmut Bicer,
Stefano Valle,
Jacob Brown,
Martin Kuball,
Krishna C. Balram
Abstract:
Achieving monolithic integration of passive acoustic wave devices, in particular RF filters, with active devices such as RF amplifiers and switches, is the optimal solution to meet the challenging communication requirements of mobile devices, especially as we move towards the 6G era. This requires a significant ($\approx$100x) reduction in the size of the RF passives, from mm$^2$ footprints in cur…
▽ More
Achieving monolithic integration of passive acoustic wave devices, in particular RF filters, with active devices such as RF amplifiers and switches, is the optimal solution to meet the challenging communication requirements of mobile devices, especially as we move towards the 6G era. This requires a significant ($\approx$100x) reduction in the size of the RF passives, from mm$^2$ footprints in current devices to tens of $μm^2$ in future systems. Applying ideas from integrated photonics, we demonstrate that high frequency (>3 GHz) sound can be efficiently guided in $μ$m-scale gallium nitride(GaN) waveguides by exploiting the strong velocity contrast available in the GaN on silicon carbide (SiC) platform. Given the established use of GaN devices in RF amplifiers, our work opens up the possibility of building monolithically integrated RF front-ends in GaN-on-SiC.
△ Less
Submitted 16 December, 2021;
originally announced December 2021.
-
Towards compact high-efficiency grating couplers for visible wavelength photonics
Authors:
Joe A. Smith,
Jorge Monroy-Ruz,
Pisu Jiang,
John G. Rarity,
Krishna C. Balram
Abstract:
While grating couplers have become the de-facto standard for optical access to integrated silicon photonics platforms, their performance at visible wavelengths, in moderate index contrast platforms like silicon nitride, leaves significant room for improvement. In particular, the index contrast governs the diffraction efficiency per grating tooth and the resulting overall coupler length. In this wo…
▽ More
While grating couplers have become the de-facto standard for optical access to integrated silicon photonics platforms, their performance at visible wavelengths, in moderate index contrast platforms like silicon nitride, leaves significant room for improvement. In particular, the index contrast governs the diffraction efficiency per grating tooth and the resulting overall coupler length. In this work, we develop two approaches to address this problem: a dielectric grating that sums multiple optical modes to increase the overall output intensity, and an embedded metal grating that enhances the attainable refractive index contrast, and therefore reduces the on-chip footprint. We present experimental results that can be developed to realise compact efficient visible wavelength photonic interconnects, with a view towards cryogenic deployment for quantum photonics, where space is constrained and efficiency is critical.
△ Less
Submitted 9 August, 2022; v1 submitted 30 September, 2021;
originally announced September 2021.
-
Cryogenic operation of MEMS-based suspended high overtone bulk acoustic wave resonators for microwave to optical signal transduction
Authors:
Stefano Valle,
Krishna C. Balram
Abstract:
Suspended high-overtone bulk acoustic wave resonators (HBARs) can serve as a viable optomechanical platform for efficient transduction of signals from the microwave to the optical frequency domain. In contrast to 1D nanobeam optomechanical crystals, HBARs benefit from very high RF to phonon injection efficiency ($η_{PIE}\approx$1) and low optical pump induced heating at cryogenic temperatures. By…
▽ More
Suspended high-overtone bulk acoustic wave resonators (HBARs) can serve as a viable optomechanical platform for efficient transduction of signals from the microwave to the optical frequency domain. In contrast to 1D nanobeam optomechanical crystals, HBARs benefit from very high RF to phonon injection efficiency ($η_{PIE}\approx$1) and low optical pump induced heating at cryogenic temperatures. By building small mode volume optical cavities around these devices, one can in principle achieve optomechanical cooperativities comparable to 1D nanobeam optomechanical crystals. In this work, we demonstrate cryogenic operation ($\approx$10 K) of such suspended HBAR devices and show classical signal modulation upto 3.5 GHz and response times $\approx$ 524 ns (for the fundamental mode at 340 MHz). While the transduction efficiency is currently limited by the material and device fabrication processes used in this work, we show that with reasonable modifications, efficient quantum transduction is within reach using this approach.
△ Less
Submitted 24 September, 2021;
originally announced September 2021.
-
Timing constraints imposed by classical digital control systems on photonic implementations of measurement-based quantum computing
Authors:
John R. Scott,
Krishna C. Balram
Abstract:
Most of the architectural research on photonic implementations of measurement-based quantum computing (MBQC) has focused on the quantum resources involved in the problem with the implicit assumption that these will provide the main constraints on system scaling. However, the `flying-qubit' architecture of photonic MBQC requires specific timing constraints that need to be met by the classical contr…
▽ More
Most of the architectural research on photonic implementations of measurement-based quantum computing (MBQC) has focused on the quantum resources involved in the problem with the implicit assumption that these will provide the main constraints on system scaling. However, the `flying-qubit' architecture of photonic MBQC requires specific timing constraints that need to be met by the classical control system. This classical control includes, for example: the amplification of the signals from single-photon detectors to voltage levels compatible with digital systems; the implementation of a control system which converts measurement outcomes into basis settings for measuring subsequent cluster qubits, in accordance with the quantum algorithm being implemented; and the digital-to-analog converter (DAC) and amplifier systems required to set these measurement bases using a fast phase modulator. In this paper, we analyze the digital system needed to implement arbitrary one-qubit rotations and controlled-NOT (CNOT) gates in discrete-variable photonic MBQC, in the presence of an ideal cluster state generator, with the main aim of understanding the timing constraints imposed by the digital logic on the analog system and quantum hardware. We use static timing analysis of a Xilinx FPGA (7 series) to provide a practical upper bound on the speed at which the adaptive measurement processing can be performed, in turn constraining the photonic clock rate of the system. Our work points to the importance of co-designing the classical control system in tandem with the quantum system in order to meet the challenging specifications of a photonic quantum computer.
△ Less
Submitted 10 September, 2021;
originally announced September 2021.
-
Piezoelectric optomechanical approaches for efficient quantum microwave-to-optical signal transduction: the need for co-design
Authors:
Krishna C. Balram,
Kartik Srinivasan
Abstract:
Piezoelectric optomechanical platforms represent one of the most promising routes towards achieving quantum transduction of photons between the microwave and optical frequency domains. However, there are significant challenges to achieving near-unity transduction efficiency. We discuss such factors in the context of the two main approaches being pursued for high efficiency transduction. The first…
▽ More
Piezoelectric optomechanical platforms represent one of the most promising routes towards achieving quantum transduction of photons between the microwave and optical frequency domains. However, there are significant challenges to achieving near-unity transduction efficiency. We discuss such factors in the context of the two main approaches being pursued for high efficiency transduction. The first approach uses one-dimensional nanobeam optomechanical crystals excited by interdigitated transducers, and is characterized by large single-photon optomechanical coupling strength, limited intracavity pump photon population to avoid absorption-induced heating, and low phonon injection efficiency from the transducer to the optomechanical cavity. The second approach uses (quasi) bulk acoustic wave resonators integrated into photonic Fabry-Perot cavity geometries, and is characterized by low single-photon optomechanical coupling strength, high intracavity pump photon population without significant heating, and high phonon injection efficiency. After reviewing the current status of both approaches, we discuss the need for co-designing the electromechanical and optomechanical sub-systems in order to achieve high transduction efficiencies, taking the GaAs piezo-optomechanical platform as an example.
△ Less
Submitted 26 August, 2021;
originally announced August 2021.
-
The NV centre coupled to an ultra-small mode volume cavity: a high efficiency source of indistinguishable photons at 200 K
Authors:
Joe A. Smith,
Chloe Clear,
Krishna C. Balram,
Dara P. S. McCutcheon,
John G. Rarity
Abstract:
Solid state atom-like systems have great promise for linear optic quantum computing and quantum communication but are burdened by phonon sidebands and broadening due to surface charges. Nevertheless, coupling to a small mode volume cavity would allow high rates of extraction from even highly dephased emitters. We consider the nitrogen vacancy centre in diamond, a system understood to have a poor q…
▽ More
Solid state atom-like systems have great promise for linear optic quantum computing and quantum communication but are burdened by phonon sidebands and broadening due to surface charges. Nevertheless, coupling to a small mode volume cavity would allow high rates of extraction from even highly dephased emitters. We consider the nitrogen vacancy centre in diamond, a system understood to have a poor quantum optics interface with highly distinguishable photons, and design a silicon nitride cavity that allows 99 % efficient extraction of photons at 200 K with an indistinguishability of > 50%, improvable by external filtering. We analyse our design using FDTD simulations, and treat optical emission using a cavity QED master equation valid at and beyond strong coupling and which includes both ZPL broadening and sideband emission. The simulated design is compact (< 10 um), and owing to its planar geometry, can be fabricated using standard silicon processes. Our work therefore points towards scalable fabrication of non-cryogenic atom-like efficient sources of indistinguishable photons.
△ Less
Submitted 9 March, 2021; v1 submitted 27 May, 2020;
originally announced May 2020.
-
Wavelength transduction from a 3D microwave cavity to telecom using piezoelectric optomechanical crystals
Authors:
H. Ramp,
T. J. Clark,
B. D. Hauer,
C. Doolin,
K. C. Balram,
K. Srinivasan,
J. P. Davis
Abstract:
Microwave to optical transduction has received a great deal of interest from the cavity optomechanics community as a landmark application for electro-optomechanical systems. In this Letter, we demonstrate a novel transducer that combines high-frequency mechanical motion and a microwave cavity for the first time. The system consists of a 3D microwave cavity and a gallium arsenide optomechanical cry…
▽ More
Microwave to optical transduction has received a great deal of interest from the cavity optomechanics community as a landmark application for electro-optomechanical systems. In this Letter, we demonstrate a novel transducer that combines high-frequency mechanical motion and a microwave cavity for the first time. The system consists of a 3D microwave cavity and a gallium arsenide optomechanical crystal, which has been placed in the microwave electric field maximum. This allows the microwave cavity to actuate the gigahertz-frequency mechanical breathing mode in the optomechanical crystal through the piezoelectric effect, which is then read out using a telecom optical mode. The gallium arsenide optomechanical crystal is a good candidate for low-noise microwave-to-telecom transduction, as it has been previously cooled to the mechanical ground state in a dilution refrigerator. Moreover, the 3D microwave cavity architecture can naturally be extended to couple to superconducting qubits and to create hybrid quantum systems.
△ Less
Submitted 25 April, 2020; v1 submitted 2 February, 2020;
originally announced February 2020.
-
Suspended gallium arsenide platform for building large scale photonic integrated circuits: Passive devices
Authors:
Pisu Jiang,
Krishna C. Balram
Abstract:
The spectacular success of silicon-based photonic integrated circuits (PICs) in the past decade naturally begs the question of whether similar fabrication procedures can be applied to other material platforms with more desirable optical properties. In this work, we demonstrate the individual passive components (grating couplers, waveguides, multi-mode interferometers and ring resonators) necessary…
▽ More
The spectacular success of silicon-based photonic integrated circuits (PICs) in the past decade naturally begs the question of whether similar fabrication procedures can be applied to other material platforms with more desirable optical properties. In this work, we demonstrate the individual passive components (grating couplers, waveguides, multi-mode interferometers and ring resonators) necessary for building large scale integrated circuits in suspended gallium arsenide (GaAs). Implementing PICs in suspended GaAs is a viable route towards achieving optimal system performance in areas with stringent device constraints like energy efficient transceivers for exascale systems, integrated electro-optic comb lasers, integrated quantum photonics, cryogenic photonics and electromechanical guided wave acousto-optics.
△ Less
Submitted 10 December, 2019;
originally announced December 2019.
-
High frequency guided mode resonances in mass-loaded, thin film gallium nitride surface acoustic wave devices
Authors:
Stefano Valle,
Manikant Singh,
Martin Cryan,
Martin Kuball,
Krishna C. Balram
Abstract:
We demonstrate high-frequency (> 3 GHz), high quality factor radio frequency (RF) resonators in unreleased thin film gallium nitride (GaN) on sapphire and silicon carbide substrates by exploiting acoustic guided mode (Lamb wave) resonances. The associated energy trap**, due to mass loading from the gold electrodes, allows us to efficiently excite these resonances from a 50 $Ω$ input. The higher…
▽ More
We demonstrate high-frequency (> 3 GHz), high quality factor radio frequency (RF) resonators in unreleased thin film gallium nitride (GaN) on sapphire and silicon carbide substrates by exploiting acoustic guided mode (Lamb wave) resonances. The associated energy trap**, due to mass loading from the gold electrodes, allows us to efficiently excite these resonances from a 50 $Ω$ input. The higher phase velocity, combined with lower electrode dam**, enables high quality factors with moderate electrode pitch, and provides a viable route towards high-frequency piezoelectric devices. The GaN platform, with its ability to guide and localize high-frequency sound on the surface of a chip with access to high-performance active devices, will serve as a key building block for monolithically integrated RF front-ends.
△ Less
Submitted 17 October, 2019;
originally announced October 2019.
-
Single photon emission and single spin coherence of a nitrogen vacancy centre encapsulated in silicon nitride
Authors:
Joe Smith,
Jorge Monroy-Ruz,
John G. Rarity,
Krishna C. Balram
Abstract:
Finding the right material platform for engineering efficient photonic interfaces to solid state emitters has been a long-standing bottleneck for scaling up solid state quantum systems. In this work, we demonstrate that nitrogen-rich silicon nitride, with its low background auto-fluorescence at visible wavelengths, is a viable quantum photonics platform by showing that nitrogen vacancy centres emb…
▽ More
Finding the right material platform for engineering efficient photonic interfaces to solid state emitters has been a long-standing bottleneck for scaling up solid state quantum systems. In this work, we demonstrate that nitrogen-rich silicon nitride, with its low background auto-fluorescence at visible wavelengths, is a viable quantum photonics platform by showing that nitrogen vacancy centres embedded in nanodiamonds preserve both their quantum optical and spin properties post-encapsulation. Given the variety of high-performance photonic components already demonstrated in silicon nitride, our work opens up a new avenue for building integrated photonic circuits using solid state emitters.
△ Less
Submitted 28 January, 2020; v1 submitted 20 September, 2019;
originally announced September 2019.
-
Microwave-to-optical transduction using a mechanical supermode for coupling piezoelectric and optomechanical resonators
Authors:
Marcelo Wu,
Emil Zeuthen,
Krishna Coimbatore Balram,
Kartik Srinivasan
Abstract:
The successes of superconducting quantum circuits at local manipulation of quantum information and photonics technology at long-distance transmission of the same have spurred interest in the development of quantum transducers for efficient, low-noise, and bidirectional frequency conversion of photons between the microwave and optical domains. We propose to realize such functionality through the co…
▽ More
The successes of superconducting quantum circuits at local manipulation of quantum information and photonics technology at long-distance transmission of the same have spurred interest in the development of quantum transducers for efficient, low-noise, and bidirectional frequency conversion of photons between the microwave and optical domains. We propose to realize such functionality through the coupling of electrical, piezoelectric, and optomechanical resonators. The coupling of the mechanical subsystems enables formation of a resonant mechanical supermode that provides a mechanically-mediated, efficient single interface to both the microwave and optical domains. The conversion process is analyzed by applying an equivalent circuit model that relates device-level parameters to overall figures of merit for conversion efficiency $η$ and added noise $N$. These can be further enhanced by proper impedance matching of the transducer to an input microwave transmission line. The performance of potential transducers is assessed through finite-element simulations, with a focus on geometries in GaAs, followed by considerations of the AlN, LiNbO$_3$, and AlN-on-Si platforms. We present strategies for maximizing $η$ and minimizing $N$, and find that simultaneously achieving $η>50~\%$ and $N < 0.5$ should be possible with current technology. We find that the use of a mechanical supermode for mediating transduction is a key enabler for high-efficiency operation, particularly when paired with an appropriate microwave impedance matching network. Our comprehensive analysis of the full transduction chain enables us to outline a development path for the realization of high-performance quantum transducers that will constitute a valuable resource for quantum information science.
△ Less
Submitted 20 January, 2020; v1 submitted 10 July, 2019;
originally announced July 2019.
-
High-frequency, resonant acousto-optic modulators fabricated in a MEMS foundry platform
Authors:
Stefano Valle,
Krishna C. Balram
Abstract:
We report the design and characterization of high frequency, resonant acousto-optic modulators (AOM) in a MEMS foundry process. The doubly-resonant cavity design, with short ($L{\sim}10.5\, μm$) acoustic and optical cavity lengths, allows us to measure acousto-optic modulation at GHz frequencies with high modulation efficiency. In contrast to traditional AOMs, these devices rely on the perturbatio…
▽ More
We report the design and characterization of high frequency, resonant acousto-optic modulators (AOM) in a MEMS foundry process. The doubly-resonant cavity design, with short ($L{\sim}10.5\, μm$) acoustic and optical cavity lengths, allows us to measure acousto-optic modulation at GHz frequencies with high modulation efficiency. In contrast to traditional AOMs, these devices rely on the perturbation induced by the displacement of cavity boundaries, which can be significantly enhanced in a suspended geometry. This platform can serve as the building block for fast 2D spatial light modulators (SLM), low-cost integrated free space optical links and optically enhanced low-noise RF receivers.
△ Less
Submitted 16 October, 2019; v1 submitted 9 April, 2019;
originally announced April 2019.
-
Elimination of Thermomechanical Noise in Piezoelectric Optomechanical Crystals
Authors:
H. Ramp,
B. D. Hauer,
K. C. Balram,
T. J. Clark,
K. Srinivasan,
J. P. Davis
Abstract:
Mechanical modes are a potentially useful resource for quantum information applications, such as quantum-level wavelength transducers, due to their ability to interact with electromagnetic radiation across the spectrum. A significant challenge for wavelength transducers is thermomechanical noise in the mechanical mode, which pollutes the transduced signal with thermal states. In this paper, we eli…
▽ More
Mechanical modes are a potentially useful resource for quantum information applications, such as quantum-level wavelength transducers, due to their ability to interact with electromagnetic radiation across the spectrum. A significant challenge for wavelength transducers is thermomechanical noise in the mechanical mode, which pollutes the transduced signal with thermal states. In this paper, we eliminate thermomechanical noise in the GHz-frequency mechanical breathing mode of a piezoelectric optomechanical crystal using cryogenic cooling in a dilution refrigerator. We optically measure an average thermal occupancy of the mechanical mode of only $0.7\pm0.4 ~ \mathrm{phonons}$, providing a path towards low-noise microwave-to-optical conversion in the quantum regime.
△ Less
Submitted 15 June, 2019; v1 submitted 21 December, 2018;
originally announced December 2018.
-
Tuning and Stabilization of Optomechanical Crystal Cavities Through NEMS Integration
Authors:
Karen E. Grutter,
Marcelo Davanço,
Krishna C. Balram,
Kartik Srinivasan
Abstract:
Nanobeam optomechanical crystals, in which localized GHz frequency mechanical modes are coupled to wavelength-scale optical modes, are being employed in a variety of experiments across different material platforms. Here, we demonstrate the electrostatic tuning and stabilization of such devices, by integrating a Si$_3$N$_4$ slot-mode optomechanical crystal cavity with a nanoelectromechanical system…
▽ More
Nanobeam optomechanical crystals, in which localized GHz frequency mechanical modes are coupled to wavelength-scale optical modes, are being employed in a variety of experiments across different material platforms. Here, we demonstrate the electrostatic tuning and stabilization of such devices, by integrating a Si$_3$N$_4$ slot-mode optomechanical crystal cavity with a nanoelectromechanical systems (NEMS) element, which controls the displacement of an additional "tuning" beam within the optical near-field of the optomechanical cavity. Under DC operation, tuning of the optical cavity wavelength across several optical linewidths with little degradation of the optical quality factor ($Q\approx10^5$) is observed. The AC response of the tuning mechanism is measured, revealing actuator resonance frequencies in the 10 MHz to 20 MHz range, consistent with the predictions from simulations. Feedback control of the optical mode resonance frequency is demonstrated, and alternative actuator geometries are presented.
△ Less
Submitted 25 June, 2018;
originally announced July 2018.
-
Efficient fiber-coupled single-photon source based on quantum dots in a photonic-crystal waveguide
Authors:
Raphaël S. Daveau,
Krishna C. Balram,
Tommaso Pregnolato,
** Liu,
Eun H. Lee,
** D. Song,
Varun Verma,
Richard Mirin,
Sae Woo Nam,
Leonardo Midolo,
Søren Stobbe,
Kartik Srinivasan,
Peter Lodahl
Abstract:
Many photonic quantum information processing applications would benefit from a high brightness, fiber-coupled source of triggered single photons. Here, we present a fiber-coupled photonic-crystal waveguide single-photon source relying on evanescent coupling of the light field from a tapered out-coupler to an optical fiber. A two-step approach is taken where the performance of the tapered out-coupl…
▽ More
Many photonic quantum information processing applications would benefit from a high brightness, fiber-coupled source of triggered single photons. Here, we present a fiber-coupled photonic-crystal waveguide single-photon source relying on evanescent coupling of the light field from a tapered out-coupler to an optical fiber. A two-step approach is taken where the performance of the tapered out-coupler is recorded first on an independent device containing an on-chip reflector. Reflection measurements establish that the chip-to-fiber coupling efficiency exceeds 80 %. The detailed characterization of a high-efficiency photonic-crystal waveguide extended with a tapered out-coupling section is then performed. The corresponding overall single-photon source efficiency is 10.9 % $\pm$ 2.3 %, which quantifies the success probability to prepare an exciton in the quantum dot, couple it out as a photon in the waveguide, and subsequently transfer it to the fiber. The applied out-coupling method is robust, stable over time, and broadband over several tens of nanometers, which makes it a highly promising pathway to increase the efficiency and reliability of planar chip-based single-photon sources.
△ Less
Submitted 27 October, 2016;
originally announced October 2016.
-
Acousto-optic and opto-acoustic modulation in piezo-optomechanical circuits
Authors:
Krishna C. Balram,
Marcelo I. Davanco,
B. Robert Ilic,
Ji-Hoon Kyhm,
** Dong Song,
Kartik Srinivasan
Abstract:
Acoustic wave devices provide a promising chip-scale platform for efficiently coupling radio frequency (RF) and optical fields. Here, we use an integrated piezo-optomechanical circuit platform that exploits both the piezoelectric and photoelastic coupling mechanisms to link 2.4 GHz RF waves to 194 THz (1550 nm) optical waves, through coupling to propagating and localized 2.4 GHz acoustic waves. We…
▽ More
Acoustic wave devices provide a promising chip-scale platform for efficiently coupling radio frequency (RF) and optical fields. Here, we use an integrated piezo-optomechanical circuit platform that exploits both the piezoelectric and photoelastic coupling mechanisms to link 2.4 GHz RF waves to 194 THz (1550 nm) optical waves, through coupling to propagating and localized 2.4 GHz acoustic waves. We demonstrate acousto-optic modulation, resonant in both the optical and mechanical domains, in which waveforms encoded on the RF carrier are mapped to the optical field. We also show opto-acoustic modulation, in which the application of optical pulses gates the transmission of propagating acoustic waves. The time-domain characteristics of this system under both pulsed RF and pulsed optical excitation are considered in the context of the different physical pathways involved in driving the acoustic waves, and modeled through the coupled mode equations of cavity optomechanics.
△ Less
Submitted 28 September, 2016;
originally announced September 2016.
-
Coherent coupling between radio frequency, optical, and acoustic waves in piezo-optomechanical circuits
Authors:
Krishna C. Balram,
Marcelo Davanco,
** Dong Song,
Kartik Srinivasan
Abstract:
The interaction of optical and mechanical modes in nanoscale optomechanical systems has been widely studied for applications ranging from sensing to quantum information science. Here, we develop a platform for cavity optomechanical circuits in which localized and interacting 1550 nm photons and 2.4 GHz phonons are combined with photonic and phononic waveguides. Working in GaAs facilitates manipula…
▽ More
The interaction of optical and mechanical modes in nanoscale optomechanical systems has been widely studied for applications ranging from sensing to quantum information science. Here, we develop a platform for cavity optomechanical circuits in which localized and interacting 1550 nm photons and 2.4 GHz phonons are combined with photonic and phononic waveguides. Working in GaAs facilitates manipulation of the localized mechanical mode either with a radio frequency field through the piezo-electric effect, or optically through the strong photoelastic effect. We use this to demonstrate a novel acoustic wave interference effect, analogous to coherent population trap** in atomic systems, in which the coherent mechanical motion induced by the electrical drive can be completely cancelled out by the optically-driven motion. The ability to manipulate cavity optomechanical systems with equal facility through either photonic or phononic channels enables new device and system architectures for signal transduction between the optical, electrical, and mechanical domains.
△ Less
Submitted 6 August, 2015;
originally announced August 2015.
-
Moving boundary and photoelastic coupling in GaAs optomechanical resonators
Authors:
Krishna C. Balram,
M. Davanco,
Ju Young Lim,
** Dong Song,
K. Srinivasan
Abstract:
Chip-based cavity optomechanical systems are being considered for applications in sensing, metrology, and quantum information science. Critical to their development is an understanding of how the optical and mechanical modes interact, quantified by the coupling rate $g_{0}$. Here, we develop GaAs optomechanical resonators and investigate the moving dielectric boundary and photoelastic contribution…
▽ More
Chip-based cavity optomechanical systems are being considered for applications in sensing, metrology, and quantum information science. Critical to their development is an understanding of how the optical and mechanical modes interact, quantified by the coupling rate $g_{0}$. Here, we develop GaAs optomechanical resonators and investigate the moving dielectric boundary and photoelastic contributions to $g_{0}$. First, we consider coupling between the fundamental radial breathing mechanical mode and a 1550 nm band optical whispering gallery mode in microdisks. For decreasing disk radius from $R=5$ $μ$m to $R=1$ $μ$m, simulations and measurements show that $g_{0}$ changes from being dominated by the moving boundary contribution to having an equal photoelastic contribution. Next, we design and demonstrate nanobeam optomechanical crystals in which a $2.5$ GHz mechanical breathing mode couples to a 1550 nm optical mode predominantly through the photoelastic effect. We show a significant (30 $\%$) dependence of $g_{0}$ on the device's in-plane orientation, resulting from the difference in GaAs photoelastic coefficients along different crystalline axes, with fabricated devices exhibiting $g_{\text{0}}/2π$ as high as 1.1 MHz for orientation along the [110] axis. GaAs nanobeam optomechanical crystals are a promising system which can combine the demonstrated large optomechanical coupling strength with additional functionality, such as piezoelectric actuation and incorporation of optical gain media.
△ Less
Submitted 22 September, 2014;
originally announced September 2014.
-
Tensile-Strained Germanium-on-Insulator Substrate Fabrication for Silicon-Compatible Optoelectronics
Authors:
J. Raja Jain,
Dany-Sebastien Ly-Gagnon,
Krishna C. Balram,
Justin S. White,
Mark L. Brongersma,
David A. B. Miller,
Roger T. Howe
Abstract:
We present a method to fabricate tensile-strained germanium-on-insulator (GOI) substrates using heteroepitaxy and layer transfer techniques. The motivation is to obtain a high-quality wafer-scale GOI platform suitable for silicon-compatible optoelectronic device fabrication. Crystal quality is assessed using X-Ray Diffraction (XRD) and Transmission Electron Microscopy. A biaxial tensile film strai…
▽ More
We present a method to fabricate tensile-strained germanium-on-insulator (GOI) substrates using heteroepitaxy and layer transfer techniques. The motivation is to obtain a high-quality wafer-scale GOI platform suitable for silicon-compatible optoelectronic device fabrication. Crystal quality is assessed using X-Ray Diffraction (XRD) and Transmission Electron Microscopy. A biaxial tensile film strain of 0.16% is verified by XRD. Suitability for device manufacturing is demonstrated through fabrication and characterization of metal-semiconductor-metal photodetectors that exhibit photoresponse beyond 1.55 μm. The substrate fabrication process is compatible with complementary metal-oxide-semiconductor manufacturing and represents a potential route to wafer-scale integration of silicon-compatible optoelectronics.
△ Less
Submitted 17 September, 2011; v1 submitted 30 April, 2011;
originally announced May 2011.
