-
Role of FLR effects in magnetopause equilibrium
Authors:
Giulio Ballerini,
Gerard Belmont,
Laurence Rezeau,
Francesco Califano
Abstract:
The Earth magnetopause, when sufficiently plane and stationary at a local scale, can be considered as a "quasi-tangential" discontinuity, since the normal component of the magnetic field Bn is typically very small but not zero. Contrary to observations, the "Classic Theory of Discontinuities" (CTD) predicts that rotational and compressional jumps should be mutually exclusive in the general case Bn…
▽ More
The Earth magnetopause, when sufficiently plane and stationary at a local scale, can be considered as a "quasi-tangential" discontinuity, since the normal component of the magnetic field Bn is typically very small but not zero. Contrary to observations, the "Classic Theory of Discontinuities" (CTD) predicts that rotational and compressional jumps should be mutually exclusive in the general case Bn n.e.t. 0, but allows only one exception: the tangential discontinuity provided that Bn is strictly zero. Here we show that Finite Larmor Radius (FLR) effects play an important role in the quasi-tangential case, whenever the ion Larmor radius is not fully negligible with respect to the magnetopause thickness. By including FLR effects, the results suggest that a rotational discontinuity undergoes a change comparable to the change of a Shear Alfven into a Kinetic Alfven wave when considering linear modes. For this new kind of discontinuity, the co-existence of rotational and compressional variations at the magnetopause does no more imply that this boundary is a strict tangential discontinuity, even in 1D-like regions far from X-lines if any. This result may lead to important consequences concerning the oldest and most basic questions of magnetospheric physics: how can the magnetopause be open, where and when? The role of FLR being established theoretically, the paper then shows that it can be proved experimentally. We make use of MMS data and process them with the most recent available 4 spacecraft tools. First, we present the different processing techniques that we use to estimate spatial derivatives, such as grad(B) and div(P), and the magnetopause normal direction. We point out why this normal direction must be determined with extremely high accuracy to make the conclusions unambiguous. The results obtained by these techniques are presented in a detailed case study and on a statistical basis.
△ Less
Submitted 11 July, 2024; v1 submitted 24 March, 2023;
originally announced March 2023.
-
Muon detection in electron-positron annihilation for muon collider studies
Authors:
N. Amapane,
M. Antonelli,
F. Anulli,
G. Ballerini,
L. Bandiera,
N. Bartosik,
M. Bauce,
A. Bertolin,
C. Biino,
O. R. Blanco- Garcia,
M. Boscolo,
C. Brizzolari,
A. Cappati,
F. Casaburo,
M. Casarsa,
G. Cavoto,
G. Cesarini,
F. Collamati,
G. Cotto,
C. Curatolo,
R. Di Nardo,
F. Gonella,
S. Hoh,
M. Iafrati,
F. Iacoangeli
, et al. (21 additional authors not shown)
Abstract:
The investigation of the energy frontier in physics requires novel concepts for future colliders. The idea of a muon collider is very appealing since it would allow to study particle collisions at up to tens of TeV energy, while offering a cleaner experimental environment with respect to hadronic colliders. One key element in the muon collider design is the low-emittance muon production. Recently,…
▽ More
The investigation of the energy frontier in physics requires novel concepts for future colliders. The idea of a muon collider is very appealing since it would allow to study particle collisions at up to tens of TeV energy, while offering a cleaner experimental environment with respect to hadronic colliders. One key element in the muon collider design is the low-emittance muon production. Recently,the Low EMittance Muon Accelerator (LEMMA) collaboration has explored the muon pair production close to its kinematic threshold by annihilating 45 GeV positrons with electrons in a low Z material target. In this configuration, muons are emerging from the target with a naturally low-emittance. In this paper we describe the performance of a system, to study this production mechanism, that consists in several segmented absorbers with alternating active layers composed of fast Cherenkov detectors together with a muon identification technique based on this detector. Passive layers were made of tungsten. We collected data corresponding to muon and electron beams produced at the H2 line in the North Area of the European Organization for Nuclear Research (CERN) in September 2018.
△ Less
Submitted 31 October, 2021; v1 submitted 26 May, 2021;
originally announced May 2021.
-
Study of muon pair production from positron annihilation at threshold energy
Authors:
N. Amapane,
M. Antonelli,
F. Anulli,
G. Ballerini,
L. Bandiera,
N. Bartosik,
M. Bauce,
A. Bertolin,
C. Biino,
O. R. Blanco-Garcia,
M. Boscolo,
C. Brizzolari,
A. Cappati,
M. Casarsa,
G. Cavoto,
F. Collamati,
G. Cotto,
C. Curatolo,
R. Di Nardo,
F. Gonella,
S. Hoh,
M. Iafrati,
F. Iacoangeli,
B. Kiani,
D. Lucchesi
, et al. (17 additional authors not shown)
Abstract:
The muon collider represents one of the most promising solutions for a future machine exploring the high energy frontier, but several challenges due to the 2.2 $μ$sec muon lifetime at rest have to be carefully considered. The LEMMA project is investigating the possibility of producing low emittance muon/antimuon pairs from the e$^+$e$^-$ annihilation process at threshold energy, resulting in small…
▽ More
The muon collider represents one of the most promising solutions for a future machine exploring the high energy frontier, but several challenges due to the 2.2 $μ$sec muon lifetime at rest have to be carefully considered. The LEMMA project is investigating the possibility of producing low emittance muon/antimuon pairs from the e$^+$e$^-$ annihilation process at threshold energy, resulting in small transverse emittance beams without any additional beam cooling. However most of the measurements available are performed at higher $\sqrt{s}$ values. It is therefore necessary to measure muons production in positron annihilation at threshold energy and compare the experimental results with the predictions in this specific energy regime. Apart from being a topic of physical interest by itself, these near to threshold measurements can have a sizeable impact on the estimation of the ultimate luminosity achievable in a muon collider with the LEMMA injection scheme.
△ Less
Submitted 10 January, 2020; v1 submitted 30 September, 2019;
originally announced September 2019.
-
Positron driven muon source for a muon collider
Authors:
D. Alesini,
M. Antonelli,
M. E. Biagini,
M. Boscolo,
O. R. Blanco-García,
A. Ciarma,
R. Cimino,
M. Iafrati,
A. Giribono,
S. Guiducci,
L. Pellegrino,
M. Rotondo,
C. Vaccarezza,
A. Variola,
A. Allegrucci,
F. Anulli,
M. Bauce,
F. Collamati,
G. Cavoto,
G. Cesarini,
F. Iacoangeli,
R. Li Voti,
A. Bacci,
I. Drebot,
P. Raimondi
, et al. (33 additional authors not shown)
Abstract:
The design of a future multi-TeV muon collider needs new ideas to overcome the technological challenges related to muon production, cooling, accumulation and acceleration. In this paper a layout of a positron driven muon source known as the Low EMittance Muon Accelerator (LEMMA) concept is presented. The positron beam, stored in a ring with high energy acceptance and low emittance, is extracted an…
▽ More
The design of a future multi-TeV muon collider needs new ideas to overcome the technological challenges related to muon production, cooling, accumulation and acceleration. In this paper a layout of a positron driven muon source known as the Low EMittance Muon Accelerator (LEMMA) concept is presented. The positron beam, stored in a ring with high energy acceptance and low emittance, is extracted and driven to a multi-target system, to produce muon pairs at threshold. This solution alleviates the issues related to the power deposited and the integrated Peak Energy Density Deposition (PEDD) on the targets. Muons produced in the multi-target system will then be accumulated before acceleration and injection in the collider. A multi-target line lattice has been designed to cope with the focusing of both the positron and muon beams. Studies on the number, material and thickness of the targets have been carried out. A general layout of the overall scheme and a description is presented, as well as plans for future R&D.
△ Less
Submitted 19 May, 2019; v1 submitted 14 May, 2019;
originally announced May 2019.
-
The ENUBET narrow band neutrino beam
Authors:
ENUBET Collaboration,
M. Tenti,
F. Acerbi,
G. Ballerini,
M. Bonesini,
C. Brizzolari,
G. Brunetti M. Calviani,
S. Carturan,
M. G. Catanesi,
S. Cecchini,
F. Cindolo,
G. Collazuol,
E. Conti F. Dal Corso,
G. De Rosa,
C. Delogu,
A. Falcone,
B. Goddard,
A. Gola,
R. A. Intonti,
C. Jollet,
V. Kain,
B. Klicek,
Y. Kudenko,
M. Laveder,
A. Longhin
, et al. (32 additional authors not shown)
Abstract:
The narrow band beam of ENUBET is the first implementation of the "monitored neutrino beam" technique proposed in 2015. ENUBET has been designed to monitor lepton production in the decay tunnel of neutrino beams and to provide a 1% measurement of the neutrino flux at source. In particular, the three body semi-leptonic decay of kaons monitored by large angle positron production offers a fully contr…
▽ More
The narrow band beam of ENUBET is the first implementation of the "monitored neutrino beam" technique proposed in 2015. ENUBET has been designed to monitor lepton production in the decay tunnel of neutrino beams and to provide a 1% measurement of the neutrino flux at source. In particular, the three body semi-leptonic decay of kaons monitored by large angle positron production offers a fully controlled $ν_{e}$ source at the GeV scale for a new generation of short baseline experiments. In this contribution the performances of the positron tagger prototypes tested at CERN beamlines in 2016-2018 are presented.
△ Less
Submitted 27 March, 2019;
originally announced March 2019.
-
The ENUBET Beamline
Authors:
ENUBET Collaboration,
G. Brunetti,
F. Acerbi,
G. Ballerini,
M. Bonesini,
A. Branca,
C. Brizzolari,
M. Calviani,
S. Carturan,
M. G. Catanesi,
S. Cecchini,
F. Cindolo,
G. Collazuol,
E. Conti,
F. Dal Corso,
G. De Rosa,
C. Delogu,
A. Falcone,
B. Goddard,
A. Gola,
R. A. Intonti,
C. Jollet,
V. Kain,
B. Klicek,
Y. Kudenko
, et al. (34 additional authors not shown)
Abstract:
The ENUBET ERC project (2016-2021) is studying a narrow band neutrino beam where lepton production can be monitored at single particle level in an instrumented decay tunnel. This would allow to measure $ν_μ$ and $ν_{e}$ cross sections with a precision improved by about one order of magnitude compared to present results. In this proceeding we describe a first realistic design of the hadron beamline…
▽ More
The ENUBET ERC project (2016-2021) is studying a narrow band neutrino beam where lepton production can be monitored at single particle level in an instrumented decay tunnel. This would allow to measure $ν_μ$ and $ν_{e}$ cross sections with a precision improved by about one order of magnitude compared to present results. In this proceeding we describe a first realistic design of the hadron beamline based on a dipole coupled to a pair of quadrupole triplets along with the optimisation guidelines and the results of a simulation based on G4beamline. A static focusing design, though less efficient than a horn-based solution, results several times more efficient than originally expected. It works with slow proton extractions reducing drastically pile-up effects in the decay tunnel and it paves the way towards a time-tagged neutrino beam. On the other hand a horn-based transferline would ensure higher yields at the tunnel entrance. The first studies conducted at CERN to implement the synchronization between a few ms proton extraction and a horn pulse of 2-10 ms are also described.
△ Less
Submitted 26 November, 2020; v1 submitted 21 March, 2019;
originally announced March 2019.
-
Irradiation and performance of RGB-HD Silicon Photomultipliers for calorimetric applications
Authors:
F. Acerbi,
G. Ballerini,
A. Berra,
C. Brizzolari,
G. Brunetti,
M. G. Catanesi,
S. Cecchini,
F. Cindolo,
A. Coffani,
G. Collazuol,
E. Conti,
F. Dal Corso,
C. Delogu,
G. De Rosa,
A. Gola,
R. A. Intonti,
C. Jollet,
Y. Kudenko,
A. Longhin,
L. Ludovici,
L. Magaletti,
G. Mandrioli,
A. Margotti,
V. Mascagna,
N. Mauri
, et al. (19 additional authors not shown)
Abstract:
Silicon Photomultipliers with cell-pitch ranging from 12 $μ$m to 20 $μ$m were tested against neutron irradiation at moderate fluences to study their performance for calorimetric applications. The photosensors were developed by FBK employing the RGB-HD technology. We performed irradiation tests up to $2 \times 10^{11}$ n/cm$^2$ (1 MeV eq.) at the INFN-LNL Irradiation Test facility. The SiPMs were c…
▽ More
Silicon Photomultipliers with cell-pitch ranging from 12 $μ$m to 20 $μ$m were tested against neutron irradiation at moderate fluences to study their performance for calorimetric applications. The photosensors were developed by FBK employing the RGB-HD technology. We performed irradiation tests up to $2 \times 10^{11}$ n/cm$^2$ (1 MeV eq.) at the INFN-LNL Irradiation Test facility. The SiPMs were characterized on-site (dark current and photoelectron response) during and after irradiations at different fluences. The irradiated SiPMs were installed in the ENUBET compact calorimetric modules and characterized with muons and electrons at the CERN East Area facility. The tests demonstrate that both the electromagnetic response and the sensitivity to minimum ionizing particles are retained after irradiation. Gain compensation can be achieved increasing the bias voltage well within the operation range of the SiPMs. The sensitivity to single photoelectrons is lost at $\sim 10^{10}$ n/cm$^2$ due to the increase of the dark current.
△ Less
Submitted 24 January, 2019;
originally announced January 2019.
-
A high precision neutrino beam for a new generation of short baseline experiments
Authors:
F. Acerbi,
G. Ballerini,
S. Bolognesi,
M. Bonesini,
C. Brizzolari,
G. Brunetti,
S. Carturan,
M. G. Catanesi,
S. Cecchini,
F. Cindolo,
G. Collazuol,
E. Conti,
F. Dal Corso,
G. De Rosa,
F. Di Lodovico,
C. Delogu,
A. Falcone,
A. Gola,
R. A. Intonti,
C. Jollet,
B. Klicek,
Y. Kudenko,
M. Laveder,
A. Longhin,
L. Ludovici
, et al. (31 additional authors not shown)
Abstract:
The current generation of short baseline neutrino experiments is approaching intrinsic source limitations in the knowledge of flux, initial neutrino energy and flavor. A dedicated facility based on conventional accelerator techniques and existing infrastructures designed to overcome these impediments would have a remarkable impact on the entire field of neutrino oscillation physics. It would impro…
▽ More
The current generation of short baseline neutrino experiments is approaching intrinsic source limitations in the knowledge of flux, initial neutrino energy and flavor. A dedicated facility based on conventional accelerator techniques and existing infrastructures designed to overcome these impediments would have a remarkable impact on the entire field of neutrino oscillation physics. It would improve by about one order of magnitude the precision on $ν_μ$ and $ν_e$ cross sections, enable the study of electroweak nuclear physics at the GeV scale with unprecedented resolution and advance searches for physics beyond the three-neutrino paradigm. In turn, these results would enhance the physics reach of the next generation long baseline experiments (DUNE and Hyper-Kamiokande) on CP violation and their sensitivity to new physics. In this document, we present the physics case and technology challenge of high precision neutrino beams based on the results achieved by the ENUBET Collaboration in 2016-2018. We also set the R&D milestones to enable the construction and running of this new generation of experiments well before the start of the DUNE and Hyper-Kamiokande data taking. We discuss the implementation of this new facility at three different level of complexity: $ν_μ$ narrow band beams, $ν_e$ monitored beams and tagged neutrino beams. We also consider a site specific implementation based on the CERN-SPS proton driver providing a fully controlled neutrino source to the ProtoDUNE detectors at CERN.
△ Less
Submitted 15 January, 2019;
originally announced January 2019.
-
KLEVER: An experiment to measure BR($K_L\toπ^0ν\barν$) at the CERN SPS
Authors:
F. Ambrosino,
R. Ammendola,
A. Antonelli,
K. Ayers,
D. Badoni,
G. Ballerini,
L. Bandiera,
J. Bernhard,
C. Biino,
L. Bomben,
V. Bonaiuto,
A. Bradley,
M. B. Brunetti,
F. Bucci,
A. Cassese,
R. Camattari,
M. Corvino,
D. De Salvador,
D. Di Filippo,
M. van Dijk,
N. Doble,
R. Fantechi,
S. Fedotov,
A. Filippi,
F. Fontana
, et al. (53 additional authors not shown)
Abstract:
Precise measurements of the branching ratios for the flavor-changing neutral current decays $K\toπν\barν$ can provide unique constraints on CKM unitarity and, potentially, evidence for new physics. It is important to measure both decay modes, $K^+\toπ^+ν\barν$ and $K_L\toπ^0ν\barν$, since different new physics models affect the rates for each channel differently. The goal of the NA62 experiment at…
▽ More
Precise measurements of the branching ratios for the flavor-changing neutral current decays $K\toπν\barν$ can provide unique constraints on CKM unitarity and, potentially, evidence for new physics. It is important to measure both decay modes, $K^+\toπ^+ν\barν$ and $K_L\toπ^0ν\barν$, since different new physics models affect the rates for each channel differently. The goal of the NA62 experiment at the CERN SPS is to measure the BR for the charged channel to within 10%. For the neutral channel, the BR has never been measured. We are designing the KLEVER experiment to measure BR($K_L\toπ^0ν\barν$) to $\sim$20% using a high-energy neutral beam at the CERN SPS starting in LHC Run 4. The boost from the high-energy beam facilitates the rejection of background channels such as $K_L\toπ^0π^0$ by detection of the additional photons in the final state. On the other hand, the layout poses particular challenges for the design of the small-angle vetoes, which must reject photons from $K_L$ decays esca** through the beam exit amidst an intense background from soft photons and neutrons in the beam. Background from $Λ\to nπ^0$ decays in the beam must also be kept under control. We present findings from our design studies for the beamline and experiment, with an emphasis on the challenges faced and the potential sensitivity for the measurement of BR($K_L\toπ^0ν\barν$).
△ Less
Submitted 22 May, 2019; v1 submitted 10 January, 2019;
originally announced January 2019.
-
Shashlik calorimeters: novel compact prototypes for the ENUBET experiment
Authors:
M. Pari,
G. Ballerini,
A. Berra,
R. Boanta,
M. Bonesini,
C. Brizzolari,
G. Brunetti,
M. Calviani,
S. Carturan,
M. G. Catanesi,
S. Cecchini,
A. Coffani,
F. Cindolo,
G. Collazuol,
E. Conti,
F. Dal Corso,
G. De Rosa,
C. Delogu,
A. Gola,
R. A. Intonti,
C. Jollet,
Y. Kudenko,
M. Laveder,
A. Longhin,
P. F. Loverre
, et al. (28 additional authors not shown)
Abstract:
We summarize in this paper the detector R&D performed in the framework of the ERC ENUBET Project. We discuss in particular the latest results on longitudinally segmented shashlik calorimeters and the first HEP application of polysiloxane-based scintillators.
We summarize in this paper the detector R&D performed in the framework of the ERC ENUBET Project. We discuss in particular the latest results on longitudinally segmented shashlik calorimeters and the first HEP application of polysiloxane-based scintillators.
△ Less
Submitted 3 December, 2018;
originally announced December 2018.
-
A narrow band neutrino beam with high precision flux measurements
Authors:
A. Coffani,
G. Ballerini,
A. Berra,
R. Boanta,
M. Bonesini,
C. Brizzolari,
G. Brunetti,
M. Calviani,
S. Carturan,
M. G. Catanesi,
S. Cecchini,
F. Cindolo,
G. Collazuol,
E. Conti,
F. Dal Corso,
G. De Rosa,
A. Gola,
R. A. Intonti,
C. Jollet,
Y. Kudenko,
M. Laveder,
A. Longhin,
P. F. Loverre,
L. Ludovici,
L. Magaletti
, et al. (27 additional authors not shown)
Abstract:
The ENUBET facility is a proposed narrow band neutrino beam where lepton production is monitored at single particle level in the instrumented decay tunnel. This facility addresses simultaneously the two most important challenges for the next generation of cross section experiments: a superior control of the flux and flavor composition at source and a high level of tunability and precision in the s…
▽ More
The ENUBET facility is a proposed narrow band neutrino beam where lepton production is monitored at single particle level in the instrumented decay tunnel. This facility addresses simultaneously the two most important challenges for the next generation of cross section experiments: a superior control of the flux and flavor composition at source and a high level of tunability and precision in the selection of the energy of the outcoming neutrinos. We report here the latest results in the development and test of the instrumentation for the decay tunnel. Special emphasis is given to irradiation tests of the photo-sensors performed at INFN-LNL and CERN in 2017 and to the first application of polysiloxane-based scintillators in high energy physics.
△ Less
Submitted 9 April, 2018;
originally announced April 2018.
-
Strong reduction of the effective radiation length in an axially oriented scintillator crystal
Authors:
L. Bandiera,
V. V. Tikhomirov,
M. Romagnoni,
N. Argiolas,
E. Bagli,
G. Ballerini,
A. Berra,
C. Brizzolari,
R. Camattari,
D. De Salvador,
V. Haurylavets,
V. Mascagna,
A. Mazzolari,
M. Prest,
M. Soldani,
A. Sytov,
E. Vallazza
Abstract:
We measured a considerable increase of the emitted radiation by 120 GeV/c electrons in an axially oriented lead tungstate scintillator crystal, if compared to the case in which the sample was not aligned with the beam direction. This enhancement resulted from the interaction of particles with the strong crystalline electromagnetic field. The data collected at the external lines of CERN SPS were cr…
▽ More
We measured a considerable increase of the emitted radiation by 120 GeV/c electrons in an axially oriented lead tungstate scintillator crystal, if compared to the case in which the sample was not aligned with the beam direction. This enhancement resulted from the interaction of particles with the strong crystalline electromagnetic field. The data collected at the external lines of CERN SPS were critically compared to Monte Carlo simulations based on the Baier Katkov quasiclassical method, highlighting a reduction of the scintillator radiation length by a factor of five in case of beam alignment with the [001] crystal axes. The observed effect opens the way to the realization of compact electromagnetic calorimeters/detectors based on oriented scintillator crystals in which the amount of material can be strongly reduced with respect to the state of the art. These devices could have relevant applications in fixed-target experiments as well as in satellite-borne gamma-telescopes.
△ Less
Submitted 25 July, 2018; v1 submitted 27 March, 2018;
originally announced March 2018.
-
Testbeam performance of a shashlik calorimeter with fine-grained longitudinal segmentation
Authors:
G. Ballerini,
A. Berra,
R. Boanta,
C. Brizzolari,
G. Brunetti,
M. G. Catanesi,
S. Cecchini,
F. Cindolo,
A. Coffani,
G. Collazuol,
E. Conti,
F. Dal Corso,
G. De Rosa,
A. Gola,
C. Jollet,
A. Longhin,
L. Ludovici,
L. Magaletti,
G. Mandrioli,
A. Margotti,
V. Mascagna,
A. Meregaglia,
M. Pari,
L. Pasqualini,
G. Paternoster
, et al. (12 additional authors not shown)
Abstract:
An iron- plastic-scintillator shashlik calorimeter with a 4.3 $X_0$ longitudinal segmentation was tested in November 2016 at the CERN East Area facility with charged particles up to 5 GeV. The performance of this detector in terms of electron energy resolution, linearity, response to muons and hadron showers are presented in this paper and compared with simulation. Such a fine-grained longitudinal…
▽ More
An iron- plastic-scintillator shashlik calorimeter with a 4.3 $X_0$ longitudinal segmentation was tested in November 2016 at the CERN East Area facility with charged particles up to 5 GeV. The performance of this detector in terms of electron energy resolution, linearity, response to muons and hadron showers are presented in this paper and compared with simulation. Such a fine-grained longitudinal segmentation is achieved using a very compact light readout system developed by the SCENTT and ENUBET Collaborations, which is based on fiber-SiPM coupling boards embedded in the bulk of the detector. We demonstrate that this system fulfills the requirements for neutrino physics applications and discuss performance and additional improvements.
△ Less
Submitted 18 January, 2018;
originally announced January 2018.
