-
Multiparametric quantification and visualization of liver fat using ultrasound
Authors:
Jihye Baek,
Ahmed El Kaffas,
Aya Kamaya,
Kenneth Hoyt,
Kevin J. Parker
Abstract:
Objectives- Several ultrasound measures have shown promise for assessment of steatosis compared to traditional B-scan, however clinicians may be required to integrate information across the parameters. Here, we propose an integrated multiparametric approach, enabling simple clinical assessment of key information from combined ultrasound parameters. Methods- We have measured 13 parameters related t…
▽ More
Objectives- Several ultrasound measures have shown promise for assessment of steatosis compared to traditional B-scan, however clinicians may be required to integrate information across the parameters. Here, we propose an integrated multiparametric approach, enabling simple clinical assessment of key information from combined ultrasound parameters. Methods- We have measured 13 parameters related to ultrasound and shear wave elastography. These were measured in 30 human subjects under a study of liver fat. The 13 individual measures are assessed for their predictive value using independent magnetic resonance imaging-derived proton density fat fraction (MRI-PDFF) measurements as a reference standard. In addition, a comprehensive and fine-grain analysis is made of all possible combinations of sub-sets of these parameters to determine if any subset can be efficiently combined to predict fat fraction. Results- We found that as few as four key parameters related to ultrasound propagation are sufficient to generate a linear multiparametric parameter with a correlation against MRI-PDFF values of greater than 0.93. This optimal combination was found to have a classification area under the curve (AUC) approaching 1.0 when applying a threshold for separating steatosis grade zero from higher classes. Furthermore, a strategy is developed for applying local estimates of fat content as a color overlay to produce a visual impression of the extent and distribution of fat within the liver. Conclusion- In principle, this approach can be applied to most clinical ultrasound systems to provide the clinician and patient with a rapid and inexpensive estimate of liver fat content.
△ Less
Submitted 2 April, 2024;
originally announced April 2024.
-
Experimental characterization of thermionic surface cooling in thermionic discharge
Authors:
Junhwi Bak,
Albina Tropina,
James Creel,
Richard B. Miles
Abstract:
In this work, the thermionic cooling effect during thermionic discharges with parallel plate electrodes at 1 Torr is investigated. Time-resolved observation of electron emission and surface temperature is realized in addition to the typical steady state characterization. Surface cooling by the electron emission, initiated by plasma ignition, is directly captured at its onset and an estimated cooli…
▽ More
In this work, the thermionic cooling effect during thermionic discharges with parallel plate electrodes at 1 Torr is investigated. Time-resolved observation of electron emission and surface temperature is realized in addition to the typical steady state characterization. Surface cooling by the electron emission, initiated by plasma ignition, is directly captured at its onset and an estimated cooling capacity of 1.6 \pm 0.2 MW/m^2 is observed. The present work provides experimental evidence of considerable surface cooling achieved by thermionic cooling. This result indicates that thermionic cooling can be a promising thermal protection method at elevated temperatures, such as those encountered by hypersonic vehicle leading edges in flight.
△ Less
Submitted 18 October, 2023;
originally announced October 2023.
-
Support Vector Machine Guided Reproducing Kernel Particle Method for Image-Based Modeling of Microstructures
Authors:
Yanran Wang,
Jonghyuk Baek,
Yichun Tang,
**g Du,
Mike Hillman,
J. S. Chen
Abstract:
This work presents an approach for automating the discretization and approximation procedures in constructing digital representations of composites from Micro-CT images featuring intricate microstructures. The proposed method is guided by the Support Vector Machine (SVM) classification, offering an effective approach for discretizing microstructural images. An SVM soft margin training process is i…
▽ More
This work presents an approach for automating the discretization and approximation procedures in constructing digital representations of composites from Micro-CT images featuring intricate microstructures. The proposed method is guided by the Support Vector Machine (SVM) classification, offering an effective approach for discretizing microstructural images. An SVM soft margin training process is introduced as a classification of heterogeneous material points, and image segmentation is accomplished by identifying support vectors through a local regularized optimization problem. In addition, an Interface-Modified Reproducing Kernel Particle Method (IM-RKPM) is proposed for appropriate approximations of weak discontinuities across material interfaces. The proposed method modifies the smooth kernel functions with a regularized heavy-side function concerning the material interfaces to alleviate Gibb's oscillations. This IM-RKPM is formulated without introducing duplicated degrees of freedom associated with the interface nodes commonly needed in the conventional treatments of weak discontinuities in the meshfree methods. Moreover, IM-RKPM can be implemented with various domain integration techniques, such as Stabilized Conforming Nodal Integration (SCNI). The extension of the proposed method to 3-dimension is straightforward, and the effectiveness of the proposed method is validated through the image-based modeling of polymer-ceramic composite microstructures.
△ Less
Submitted 23 May, 2023;
originally announced May 2023.
-
High resolution spatially extended 1D laser scattering diagnostics using volume Bragg grating notch filters
Authors:
Junhwi Bak,
Jean Luis Suazo Betancourt,
Anuj Rekhy,
Amirhossein Abbasszadehrad,
Richard B. Miles,
Christopher M. Limbach,
Mitchell L. R. Walker
Abstract:
Laser light scattering systems with volume Bragg grating (VBG) filters, which act as a spectral/angular filter, have often been used as a point measurement technique with spatial resolution as low as a few hundred um defined by the beam waist. In this work, we demonstrate how VBG filters can be leveraged for spatially resolved measurements with several um resolution perpendicular to the laser prop…
▽ More
Laser light scattering systems with volume Bragg grating (VBG) filters, which act as a spectral/angular filter, have often been used as a point measurement technique with spatial resolution as low as a few hundred um defined by the beam waist. In this work, we demonstrate how VBG filters can be leveraged for spatially resolved measurements with several um resolution perpendicular to the laser propagation axis over a few mm along the beam propagation axis. The rejection ring, as determined by the angular acceptance criteria of the filter, is derived analytically, and the use of the ring for 1D laser line rejection is explained. For the example cases presented, having a focused probe beam waist with a diameter of ~150 um, the rejection ring can provide up to several mm length along the beam propagation axis for a 1D measurement, which is also tunable. Additionally, methods to further extend the measurable region are proposed and demonstrated; using a collimation lens with a different focal length or using multiple VBG filters. The latter case can minimize the scattering signal loss, without the trade-off of the solid angle. Such use of multiple VBGs is to extend the measurable region along the beam axis, which differs from the commonly known application of multiple filters to improve the suppression of elastic interferences. 1D rotational Raman and Thomson scattering measurements are carried out on pulsed and DC discharges to verify this method. The system features compactness, simple implementation, high throughput, and flexibility to accommodate various experimental conditions.
△ Less
Submitted 17 August, 2022;
originally announced August 2022.
-
A dual color, frequency, pulse duration and shape agile laser system for particle spectroscopy and manipulation
Authors:
Junhwi Bak,
Robert Randolph,
Alexandros Gerakis
Abstract:
A dual color, frequency and pulse duration agile laser system, capable of delivering laser pulses in arbitrary temporal profiles with ~1 ns to ~1 us pulse duration, chir** rates of ~27 MHz/ns with an achievable chir** range of several GHz across the pulse duration, and with energies ranging from a few nJ to hundreds of mJ per pulse has been developed. The flexibility and capability of this las…
▽ More
A dual color, frequency and pulse duration agile laser system, capable of delivering laser pulses in arbitrary temporal profiles with ~1 ns to ~1 us pulse duration, chir** rates of ~27 MHz/ns with an achievable chir** range of several GHz across the pulse duration, and with energies ranging from a few nJ to hundreds of mJ per pulse has been developed. The flexibility and capability of this laser system provide a wide range of laser parameters that can be exploited to optimize operational conditions in various experiments ranging from laser diagnostics to spectroscopy and optical manipulation of matter. The developed system is successfully demonstrated to obtain coherent Rayleigh-Brillouin scattering (CRBS) in both single and dual color configuration, in an effort to expand the non-intrusive accessibility towards lower pressure regime for neutral gas and plasma diagnostics.
△ Less
Submitted 18 July, 2022;
originally announced July 2022.
-
Improving the diagnosis of breast cancer based on biophysical ultrasound features utilizing machine learning
Authors:
Jihye Baek,
Avice M. O'Connell,
Kevin J. Parker
Abstract:
The improved diagnostic accuracy of ultrasound breast examinations remains an important goal. In this study, we propose a biophysical feature based machine learning method for breast cancer detection to improve the performance beyond a benchmark deep learning algorithm and to furthermore provide a color overlay visual map of the probability of malignancy within a lesion. This overall framework is…
▽ More
The improved diagnostic accuracy of ultrasound breast examinations remains an important goal. In this study, we propose a biophysical feature based machine learning method for breast cancer detection to improve the performance beyond a benchmark deep learning algorithm and to furthermore provide a color overlay visual map of the probability of malignancy within a lesion. This overall framework is termed disease specific imaging. Previously, 150 breast lesions were segmented and classified utilizing a modified fully convolutional network and a modified GoogLeNet, respectively. In this study multiparametric analysis was performed within the contoured lesions. Features were extracted from ultrasound radiofrequency, envelope, and log compressed data based on biophysical and morphological models. The support vector machine with a Gaussian kernel constructed a nonlinear hyperplane, and we calculated the distance between the hyperplane and data point of each feature in multiparametric space. The distance can quantitatively assess a lesion, and suggest the probability of malignancy that is color coded and overlaid onto B mode images. Training and evaluation were performed on in vivo patient data. The overall accuracy for the most common types and sizes of breast lesions in our study exceeded 98.0% for classification and 0.98 for an area under the receiver operating characteristic curve, which is more precise than the performance of radiologists and a deep learning system. Further, the correlation between the probability and BI RADS enables a quantitative guideline to predict breast cancer. Therefore, we anticipate that the proposed framework can help radiologists achieve more accurate and convenient breast cancer classification and detection.
△ Less
Submitted 13 July, 2022;
originally announced July 2022.
-
A realizable second-order advection method with variable flux limiters for moment transport equations
Authors:
Byeongyeob Choi,
Jehyun Baek,
Donghyun You
Abstract:
A second-order total variation diminishing (TVD) method with variable flux limiters is proposed to overcome the non-realizability issue, which has been one of major obstacles in applying the conventional second-order TVD schemes to the moment transport equations. In the present method, a realizable moment set at a cell face is reconstructed by allowing the flexible selection of the flux limiter va…
▽ More
A second-order total variation diminishing (TVD) method with variable flux limiters is proposed to overcome the non-realizability issue, which has been one of major obstacles in applying the conventional second-order TVD schemes to the moment transport equations. In the present method, a realizable moment set at a cell face is reconstructed by allowing the flexible selection of the flux limiter values within the second-order TVD region. Necessary conditions for the variable flux limiter scheme to simultaneously satisfy the realizability and the second-order TVD property for the third-order moment set are proposed. The strategy for satisfying the second-order TVD property is conditionally extended to the fourth- and fifth-order moments. The proposed method is verified and compared with other high-order realizable schemes in one- and two-dimensional configurations, and is found to preserve the realizability of moments while satisfying the high-order TVD property for the third-order moment set and conditionally for the fourth- and fifth-order moments.
△ Less
Submitted 22 May, 2022;
originally announced May 2022.
-
A Neural Network-enhanced Reproducing Kernel Particle Method for Modeling Strain Localization
Authors:
Jonghyuk Baek,
Jiun-Shyan Chen,
Kristen Susuki
Abstract:
Modeling the localized intensive deformation in a damaged solid requires highly refined discretization for accurate prediction, which significantly increases the computational cost. Although adaptive model refinement can be employed for enhanced effectiveness, it is cumbersome for the traditional mesh-based methods to perform while modeling the evolving localizations. In this work, neural network-…
▽ More
Modeling the localized intensive deformation in a damaged solid requires highly refined discretization for accurate prediction, which significantly increases the computational cost. Although adaptive model refinement can be employed for enhanced effectiveness, it is cumbersome for the traditional mesh-based methods to perform while modeling the evolving localizations. In this work, neural network-enhanced reproducing kernel particle method (NN-RKPM) is proposed, where the location, orientation, and shape of the solution transition near a localization is automatically captured by the NN approximation via a block-level neural network optimization. The weights and biases in the blocked parametrization network control the location and orientation of the localization. The designed basic four-kernel NN block is capable of capturing a triple junction or a quadruple junction topological pattern, while more complicated localization topological patters are captured by the superposition of multiple four-kernel NN blocks. The standard RK approximation is then utilized to approximate the smooth part of the solution, which permits a much coarser discretization than the high-resolution discretization needed to capture sharp solution transitions with the conventional methods. A regularization of the neural network approximation is additionally introduced for discretization-independent material responses. The effectiveness of the proposed NN-RKPM is verified by a series of numerical verifications.
△ Less
Submitted 16 May, 2022; v1 submitted 28 April, 2022;
originally announced April 2022.
-
Evolution of electron cross-field transport induced by an equilibrium azimuthal electric field in an $\mathrm{E}\times\mathrm{B}$ Hall thruster discharge under an azimuthally inhomogeneous neutral supply
Authors:
Junhwi Bak,
Rei Kawashima,
Jacob Simmonds,
Kimiya Komurasaki
Abstract:
The electron cross-field transport by the induced azimuthal electric field in a Hall thruster exhibits the mobility scaled by $1/B$. This study investigates parameters affecting this transport over a Hall thruster's distinct regions, such as the ionization, acceleration, and plume region. The main focus is on the nonzero equilibrium azimuthal electric field induced by an azimuthally inhomogeneous…
▽ More
The electron cross-field transport by the induced azimuthal electric field in a Hall thruster exhibits the mobility scaled by $1/B$. This study investigates parameters affecting this transport over a Hall thruster's distinct regions, such as the ionization, acceleration, and plume region. The main focus is on the nonzero equilibrium azimuthal electric field induced by an azimuthally inhomogeneous neutral supply. A fast Fourier transform analysis of the plasma structure reveals that the wavenumber $k$ of the azimuthal plasma structure increases from $k=2$, which is the input condition, to $k=4$ in the plume region, and that the total axial flux caused by the azimuthal electric field is mainly induced from the structures of the dominant Fourier components. The azimuthal phase relation between plasma potential and density is formed to maximize the axial electron flux at the plume region and starts varying along with other plasma properties as electrons flow toward the acceleration region. The spatial evolution of the effective axial mobility coefficient is extracted, and its regional characteristics are discussed.
△ Less
Submitted 5 October, 2021;
originally announced October 2021.
-
Stochastic fluctuation and transport of tokamak edge plasmas with the resonant magnetic perturbation field
Authors:
Minjun J. Choi,
Jae-Min Kwon,
Juhyung Kim,
Tongnyeol Rhee,
Jun-Gyo Bak,
Giwook Shin,
Hyun-Seok Kim,
Hogun Jhang,
Kimin Kim,
Gunsu S. Yun,
Minwoo Kim,
SangKyeun Kim,
Helen H. Kaang,
Jong-Kyu Park,
Hyung Ho Lee,
Yongkyoon In,
Jaehyun Lee,
Minho Kim,
Byoung-Ho Park,
Hyeon K. Park
Abstract:
We present that a statistical method known as the Complexity-Entropy analysis is useful to characterize a state of plasma turbulence and flux in the resonant magnetic perturbation (RMP) edge localized mode (ELM) control experiment. The RMP ELM suppression phase with the stochastic pedestal top temperature fluctuation can be distinguished from the natural ELM free phase with the chaotic fluctuation…
▽ More
We present that a statistical method known as the Complexity-Entropy analysis is useful to characterize a state of plasma turbulence and flux in the resonant magnetic perturbation (RMP) edge localized mode (ELM) control experiment. The RMP ELM suppression phase with the stochastic pedestal top temperature fluctuation can be distinguished from the natural ELM free phase with the chaotic fluctuation. It is discussed that the stochastic temperature fluctuation localized near the pedestal top can be originated from the narrow layer of the field penetration near the pedestal top. The forced magnetic island can emit the resonant drift wave of comparable sizes (relatively low-k) in the RMP ELM suppression phase, and it can results in the generation of stochastic higher wavenumber fluctuations coupled to tangled fields around the island. The analysis of the ion saturation current measurement around the main outer striking point on the divertor shows that it also becomes more stochastic as the stronger plasma response to the RMP field is expected.
△ Less
Submitted 17 August, 2022; v1 submitted 21 February, 2021;
originally announced February 2021.
-
Atomic-resolution elemental map** at cryogenic temperatures enabled by direct electron detection
Authors:
Berit H. Goodge,
David J. Baek,
Lena F. Kourkoutis
Abstract:
Spectroscopic map** by scanning transmission electron microscopy coupled with electron energy loss spectroscopy (STEM-EELS) is a powerful technique for determining the structure and chemistry of a wide range of materials and interfaces. The extension of this technique to cryogenic temperatures opens the door to new experiments across many fields including materials physics, energy storage and co…
▽ More
Spectroscopic map** by scanning transmission electron microscopy coupled with electron energy loss spectroscopy (STEM-EELS) is a powerful technique for determining the structure and chemistry of a wide range of materials and interfaces. The extension of this technique to cryogenic temperatures opens the door to new experiments across many fields including materials physics, energy storage and conversion, and biology. Such experiments, however, often face signal limitations due to sample sensitivity or the need for rapid data acquisition under less stable cryogenic conditions. Compared to traditional indirect detection systems such as charge coupled devices (CCDs), direct electron detectors (DEDs) offer improved detective quantum efficiencies, narrower point spread functions, and superior signal-to-noise ratios. Here, we compare the performance of a Gatan K2 Summit DED to an UltraScan 1000 CCD for use in signal-limited atomic-resolution STEM-EELS experiments. Due to its improved point spread function, the DED's energy resolution remains comparable to that of the CCD at a 5 times lower dispersion, providing simultaneous access to a much broader total energy range without sacrificing spectral resolution. More importantly, the benefits of direct detection enable a variety of low-signal experiments, including atomic-resolution map** of minor and high energy edges such as the La-M$_{2,3}$ edge at 1123 eV and the Bi-M$_{4,5}$ edge at 2580 eV. For rapid acquisitions at 400 spectra per second, elemental maps recorded with the DED show an up to 40 percent increase in atomic lattice fringe contrast compared to those acquired with the CCD. Taking advantage of these performance improvements and the fast readout of the K2 DED, we use direct detection STEM-EELS to demonstrate atomic-resolution elemental map** at cryogenic temperatures.
△ Less
Submitted 19 July, 2020;
originally announced July 2020.
-
Fine-tuning the H-scan for visualizing types of tissue scatterers
Authors:
Kevin J. Parker,
Jihye Baek
Abstract:
The H-scan approach is a matched filter methodology that aims to add information to the traditional ultrasound B-scan. The theory is based on the differences in the echoes produced by different classes of reflectors or scatterers. Matched filters can be created for different types of scatterers, whereby the maximum output indicates a match and color schemes can be used to indicate the class of sca…
▽ More
The H-scan approach is a matched filter methodology that aims to add information to the traditional ultrasound B-scan. The theory is based on the differences in the echoes produced by different classes of reflectors or scatterers. Matched filters can be created for different types of scatterers, whereby the maximum output indicates a match and color schemes can be used to indicate the class of scatterer responsible for echoes, providing a visual interpretation of the results. However, within the theory of weak scattering from a variety of shapes, small changes in the size of the inhomogeneous objects will create shifts in the scattering transfer function. In this paper, we determine the shift in center frequency, along with time and frequency domain characteristics of echoes and argue for a general power law transfer function to capture the major characteristics of scattering types. With this general approach, the H-scan matched filters can be set to elicit more fine grain shifts in scattering types, commensurate with more subtle changes in tissue morphology. Compensation for frequency dependent attenuation is helpful for avoiding beam softening effects with increasing depths. Examples from phantoms and normal and pathological tissues are provided to demonstrate that the H-scan analysis and displays are sensitive to scatterer size and morphology, and can be adapted to conventional imaging systems.
△ Less
Submitted 13 February, 2020;
originally announced February 2020.
-
Deep neural network Grad-Shafranov solver constrained with measured magnetic signals
Authors:
Semin Joung,
Jaewook Kim,
Sehyun Kwak,
J. G. Bak,
S. G. Lee,
H. S. Han,
H. S. Kim,
Geunho Lee,
Daeho Kwon,
Y. -c. Ghim
Abstract:
A neural network solving Grad-Shafranov equation constrained with measured magnetic signals to reconstruct magnetic equilibria in real time is developed. Database created to optimize the neural network's free parameters contain off-line EFIT results as the output of the network from $1,118$ KSTAR experimental discharges of two different campaigns. Input data to the network constitute magnetic sign…
▽ More
A neural network solving Grad-Shafranov equation constrained with measured magnetic signals to reconstruct magnetic equilibria in real time is developed. Database created to optimize the neural network's free parameters contain off-line EFIT results as the output of the network from $1,118$ KSTAR experimental discharges of two different campaigns. Input data to the network constitute magnetic signals measured by a Rogowski coil (plasma current), magnetic pick-up coils (normal and tangential components of magnetic fields) and flux loops (poloidal magnetic fluxes). The developed neural networks fully reconstruct not only the poloidal flux function $ψ\left( R, Z\right)$ but also the toroidal current density function $j_φ\left( R, Z\right)$ with the off-line EFIT quality. To preserve robustness of the networks against a few missing input data, an imputation scheme is utilized to eliminate the required additional training sets with large number of possible combinations of the missing inputs.
△ Less
Submitted 7 November, 2019;
originally announced November 2019.
-
Bayesian with Gaussian process based missing input imputation scheme for reconstructing magnetic equilibria in real time
Authors:
Semin Joung,
Jaewook Kim,
Sehyun Kwak,
Kyeo-reh Park,
S. H. Hahn,
H. S. Han,
H. S. Kim,
J. G. Bak,
S. G. Lee,
Y. -c. Ghim
Abstract:
A Bayesian with GP(Gaussian Process)-based numerical method to impute a few missing magnetic signals caused by impaired magnetic probes during tokamak operations is developed such that the real-time reconstruction of magnetic equilibria, whose performance strongly depends on the measured magnetic signals and their intactness, are affected minimally. Likelihood of the Bayesian model constructed wit…
▽ More
A Bayesian with GP(Gaussian Process)-based numerical method to impute a few missing magnetic signals caused by impaired magnetic probes during tokamak operations is developed such that the real-time reconstruction of magnetic equilibria, whose performance strongly depends on the measured magnetic signals and their intactness, are affected minimally. Likelihood of the Bayesian model constructed with the Maxwell's equations, specifically Gauss's law of magnetism and Ampère's law, results in infinite number of solutions if two or more magnetic signals are missing. This undesirable characteristic of the Bayesian model is remediated by coupling the model with the Gaussian process. Our proposed numerical method infers the missing magnetic signals correctly in less than $1$\:msec suitable for real-time reconstruction of magnetic equilibria during tokamak operations. The method can also be used for a neural network that reconstructs magnetic equilibria trained with a complete set of magnetic signals. Without our proposed imputation method, such a neural network would become useless if missing signals are not tolerable by the network.
△ Less
Submitted 11 June, 2018;
originally announced June 2018.
-
Particle Simulation of Plasma Drag Force Generation in the Magnetic Plasma Deorbit
Authors:
Rei Kawashima,
Junhwi Bak,
Shinji Matsuzawa,
Takaya Inamori
Abstract:
The magnetic plasma deorbit method has been proposed for micro and nanosatellites in the low earth orbit (LEO). The magnetic plasma deorbit utilizes the plasma drag force generated by the interaction between space plasma and the magnetic field surrounding magnetic torquers (MTQs). In this study, the plasma drag force generated by the magnetic plasma deorbit method is estimated by using a plasma fl…
▽ More
The magnetic plasma deorbit method has been proposed for micro and nanosatellites in the low earth orbit (LEO). The magnetic plasma deorbit utilizes the plasma drag force generated by the interaction between space plasma and the magnetic field surrounding magnetic torquers (MTQs). In this study, the plasma drag force generated by the magnetic plasma deorbit method is estimated by using a plasma flow simulation based on the fully kinetic model. The dependences of the plasma drag force on the MTQ angle, atmospheric plasma density, and MTQ magnetic moment are investigated. The simulation results show that the structures of the bow shock and magnetosphere are formed in the vicinity of the MTQs. The predicted plasma drag force is 105.2 nN for an MTQ of 10 A m$^2$ when the MTQ magnetic moment is parallel to the satellite velocity direction. The plasma drag force shows a strong dependence on the magnetic moment angle. In addition, the plasma drag force is proportional to the atmospheric plasma density and the MTQ magnetic moment. Steady drag force generation in the magnetic plasma deorbit is validated, and the sensitivities of the drag force to the relevant parameters are elucidated.
△ Less
Submitted 1 June, 2021; v1 submitted 16 May, 2018;
originally announced May 2018.
-
Two-dimensional Modeling of the Hall Thruster Discharge with Non-uniform Propellant Supply in Azimuth
Authors:
Rei Kawashima,
Junhwi Bak,
Kimiya Komurasaki,
Hiroyuki Koizumi
Abstract:
A two-dimensional simulation is conducted to investigate the effect of cross-field electron transport enhancement in the Hall thruster discharge caused by the nonuniform propellant supply in azimuth. The Hall thruster operation with azimuthally nonuniform propellant supply is expected to be a good test case to understand the influences of azimuthal plasma property distributions on the axial electr…
▽ More
A two-dimensional simulation is conducted to investigate the effect of cross-field electron transport enhancement in the Hall thruster discharge caused by the nonuniform propellant supply in azimuth. The Hall thruster operation with azimuthally nonuniform propellant supply is expected to be a good test case to understand the influences of azimuthal plasma property distributions on the axial electron transport. A particle-fluid hybrid model is developed with a two-dimensional magnetized electron fluid model incorporated with an empirical anomalous electron mobility model. The calculation results indicate that the azimuthal electric field is generated in the cases of nonuniform propellant supply. The azimuthal phase shift is observed between the ion number density and space potential at the downstream plume region. Owing to this azimuthal out-of-phase and the azimuthal electric field, the cross-field electron transport in the axial direction can be enhanced.
△ Less
Submitted 15 May, 2018;
originally announced May 2018.
-
SOL width and intermittent fluctuations in KSTAR
Authors:
O. E. Garcia,
R. Kube,
A. Theodorsen,
J. -G. Bak,
S. -H. Hong,
H. -S. Kim,
the KSTAR Project Team,
R. A. Pitts
Abstract:
Radial profiles of the ion saturation current and its fluctuation statistics are presented from probe measurements in L-mode, neutral beam heated plasmas at the outboard mid-plane region of KSTAR. The familiar two-layer structure, seen elsewhere in tokamak L-mode discharges, with a steep near-SOL profile and a broad far-SOL profile, is observed. The profile scale length in the far-SOL increases dr…
▽ More
Radial profiles of the ion saturation current and its fluctuation statistics are presented from probe measurements in L-mode, neutral beam heated plasmas at the outboard mid-plane region of KSTAR. The familiar two-layer structure, seen elsewhere in tokamak L-mode discharges, with a steep near-SOL profile and a broad far-SOL profile, is observed. The profile scale length in the far-SOL increases drastically with line-averaged density, thereby enhancing plasma interactions with the main chamber walls. Time series from the far-SOL region are characterised by large-amplitude bursts attributed to the radial motion of blob-like plasma filaments. Analysis of a data time series of several seconds duration under stationary plasma conditions reveals the statistical properties of these fluctuations, including the rate of level crossings and the average duration of periods spent above a given threshold level. This is shown to be in excellent agreement with predictions of a stochastic model, giving novel predictions of plasma-wall interactions due to transient transport events.
△ Less
Submitted 10 November, 2016;
originally announced November 2016.
-
Network structure and patterns of information diversity on Twitter
Authors:
Jesse Shore,
Jiye Baek,
Chrysanthos Dellarocas
Abstract:
Social media have great potential to support diverse information sharing, but there is widespread concern that platforms like Twitter do not result in communication between those who hold contradictory viewpoints. Because users can choose whom to follow, prior research suggests that social media users exist in 'echo chambers' or become polarized. We seek evidence of this in a complete cross sectio…
▽ More
Social media have great potential to support diverse information sharing, but there is widespread concern that platforms like Twitter do not result in communication between those who hold contradictory viewpoints. Because users can choose whom to follow, prior research suggests that social media users exist in 'echo chambers' or become polarized. We seek evidence of this in a complete cross section of hyperlinks posted on Twitter, using previously validated measures of the political slant of news sources to study information diversity. Contrary to prediction, we find that the average account posts links to more politically moderate news sources than the ones they receive in their own feed. However, members of a tiny network core do exhibit cross-sectional evidence of polarization and are responsible for the majority of tweets received overall due to their popularity and activity, which could explain the widespread perception of polarization on social media.
△ Less
Submitted 11 December, 2017; v1 submitted 22 July, 2016;
originally announced July 2016.
-
Efficient Hybrid White Organic Light-Emitting Diodes for Application of Triplet Harvesting with Simple Structure
Authors:
Kyo Min Hwang,
Song Eun Lee,
Sungkyu Lee,
Han Kyu Yoo,
Hyun Jung Baek,
Jwa** Kim,
Seung Soo Yoon,
Young Kwan Kim
Abstract:
In this study, we fabricated hybrid white organic light-emitting diodes (WOLEDs) based on triplet harvesting with simple structure. All the hole transporting material and host in emitting layer (EML) of devices were utilized with same material by using N,N'-di-1-naphthalenyl-N,N'-diphenyl-[1,1':4',1":4",1"'-quaterphenyl]-4,4"'-diamine (4P-NPD) which were known to be blue fluorescent material. Simp…
▽ More
In this study, we fabricated hybrid white organic light-emitting diodes (WOLEDs) based on triplet harvesting with simple structure. All the hole transporting material and host in emitting layer (EML) of devices were utilized with same material by using N,N'-di-1-naphthalenyl-N,N'-diphenyl-[1,1':4',1":4",1"'-quaterphenyl]-4,4"'-diamine (4P-NPD) which were known to be blue fluorescent material. Simple hybrid WOLEDs were fabricated three color with blue fluorescent and green, red phosphorescent materials. We was investigated the effect of triplet harvesting (TH) by exciton generation zone on simple hybrid WOLEDs. Characteristic of simple hybrid WOLEDs were dominant hole mobility, therefore exciton generation zone was expected in EML. Additionally, we was optimization thickness of hole transporting layer and electron transporting layer was fabricated a simple hybrid WOLEDs. Simple hybrid WOLED exhibits maximum luminous efficiency of 29.3 cd/A and maximum external quantum efficiency of 11.2%. Commission Internationale de l'Eclairage (International Commission on Illumination) coordinates of (0.45, 0.43) at about 10,000 cd/m^2.
△ Less
Submitted 23 May, 2016;
originally announced May 2016.
-
Determination of Correction Factors for Small Field Based on Measurement and Numerical Calculation using Cylindrical Ionization Chambers
Authors:
Kwangwoo Park,
Wonhoon Choi,
Sungho Park,
** Hwa Choi,
Suk Won Park,
**o Bak
Abstract:
We studied the investigation of volume averaging effect for air-filled cylindrical ionization chambers to determine correction factors in small photon field for the given chamber. As a method, we measured output factors using several cylindrical ionization chambers and calculated with mathematical method similar to deconvolution in which we modeled non-constant and inhomogeneous exposure function…
▽ More
We studied the investigation of volume averaging effect for air-filled cylindrical ionization chambers to determine correction factors in small photon field for the given chamber. As a method, we measured output factors using several cylindrical ionization chambers and calculated with mathematical method similar to deconvolution in which we modeled non-constant and inhomogeneous exposure function in the cavity of chamber. The parameters in exposure function and correction factors were determined by solving a system of equations we developed with measurement data and geometry of the given chamber. Correction factors (CFs) we had found are very similar to that from Monte Carlo (MC) simulation. For example, CFs in this study were computed as 1.116 for PTW31010, and 1.0225 for PTW31016, while CFs from MC were reported as approximately between 1.17 and 1.20 for PTW31010, and between 1.02 and 1.06 for PTW31016 in of 6MV photon beam . Furthermore, the result from the method of deconvolution combined with MC for chamber response function, also showed similar CF for PTW 30013, which was reported as 2.29 and 1.54 in and filed size respectively. The CFs from our method provided similarly as 2.42 and 1.54. In addition, we reported CFs for PTW30013, PTW31010, PTW31016, IBA FC23-C, and IBA CC13. As a consequence, we suggested a newly developed method to measure correct output factor using the fact that inhomogeneous exposure, force a volume averaging effect in a cavity of air filled cylindrical ionization chamber. The result from this method is very similar to that from MC simulation. The method we developed can easily be applied to clinic.
△ Less
Submitted 16 March, 2015;
originally announced March 2015.
-
Evaluation of Setup Uncertainties for Single-Fraction SRS by Comparing the Two Different Mask-Creation Methods
Authors:
Jong Geun Baek,
Hyun Soo Jang,
Young Kee Oh,
Hyun Jeong Lee,
Eng Chan Kim
Abstract:
The purpose of this study was to evaluate the setup uncertainties for single-fraction stereotactic radiosurgery (SF-SRS) based on the clinical data with the two different mask-creation methods using pretreatment CBCT imaging guidance. Dedicated frameless fixation BrainLAB masks for 23 patients were created as a routine mask (R-mask) making method, as explained in the BrainLAB user manual. The alte…
▽ More
The purpose of this study was to evaluate the setup uncertainties for single-fraction stereotactic radiosurgery (SF-SRS) based on the clinical data with the two different mask-creation methods using pretreatment CBCT imaging guidance. Dedicated frameless fixation BrainLAB masks for 23 patients were created as a routine mask (R-mask) making method, as explained in the BrainLAB user manual. The alternative masks (A-mask) which were created by modifying the cover range of the R-mask for the patient head were used for 23 patients. The systematic errors including the each mask and stereotactic target localizer were analyzed and the errors were calculated as the mean and standard deviation (SD) from the LR, SI, AP, and yaw setup corrections. In addition, the frequency of three-dimensional (3D) vector length were also analyzed. The values of the mean setup corrections for the R-mask in all directions were small; < 0.7 mm and < 0.1 degree, whereas the magnitudes of the SDs were relatively large compared to the mean values. In contrast to the R-mask, the means and SDs of the A-mask were smaller than those for the R-mask with the exception of the SD in the AP direction. The mean and SD in the yaw rotational direction in the R-mask and A-mask system were comparable. The 3D vector shifts of a larger magnitude occurred more frequently for the R-mask than the A-mask. The setup uncertainties for each mask with the stereotactic localizing system had an asymmetric offset towards the positive AP direction. The A-mask-creation method, which is capable of covering the top of the patient head is superior to that for R-mask, and thereby the use of the A-mask is encouraged for SF-SRS to reduce the setup uncertainties. Moreover, the careful mask making is required to prevent the possible setup uncertainties.
△ Less
Submitted 12 March, 2015;
originally announced March 2015.
-
6 MV photon beam modeling for Varian Clinac iX using GEANT4 virtual jaw
Authors:
Byung Yong Kim,
Hyung Dong Kim,
Dong Ho Kim,
Jong Geun Baek,
Su Ho Moon,
Gwang Won Rho,
Jeong Ku Kang,
Sung Kyu Kim
Abstract:
Most virtual source models (VSM) use beam modeling, with the exception of the patient-dependent secondary collimator (jaw). Unlike other components of the treatment head, the jaw absorbs many photons generated by the bremsstrahlung, which decreases the efficiency of the simulation. In the present study, a new method of beam modeling using a virtual jaw was applied to improve the calculation effici…
▽ More
Most virtual source models (VSM) use beam modeling, with the exception of the patient-dependent secondary collimator (jaw). Unlike other components of the treatment head, the jaw absorbs many photons generated by the bremsstrahlung, which decreases the efficiency of the simulation. In the present study, a new method of beam modeling using a virtual jaw was applied to improve the calculation efficiency of VSM. The results for the percentage depth dose and profile of the virtual jaw VSM calculated in a homogeneous water phantom agreed with the measurement results for the CC13 cylinder type ion chamber within an error rate of 2%, and the 80 to 20% penumbra width agreed with the measurement results within an error of 0.6 mm. Compared with the existing VSM, in which a great number of photons are absorbed, the calculation efficiency of the VSM using the virtual jaw was expected to increase by approximately 67%.
△ Less
Submitted 11 March, 2015;
originally announced March 2015.
-
First evidence of Alfven wave activity in KSTAR plasmas
Authors:
M. J. Hole,
C. M. Ryu,
M. H. Woo,
J. G. Bak,
S E. Sharapov,
M. Fitzgerald,
the KSTAR team
Abstract:
We report on first evidence of wave activity during neutral beam heating in KSTAR plasmas: 40 kHz magnetic fluctuations with a toroidal mode number of n=1. Our analysis suggests this a beta-induced Alfven eigenmode resonant with the q=1 surface. A kinetic analysis, when coupled with electron temperature measurements from electron cyclotron emission and ion/electron temperature ratios from crystall…
▽ More
We report on first evidence of wave activity during neutral beam heating in KSTAR plasmas: 40 kHz magnetic fluctuations with a toroidal mode number of n=1. Our analysis suggests this a beta-induced Alfven eigenmode resonant with the q=1 surface. A kinetic analysis, when coupled with electron temperature measurements from electron cyclotron emission and ion/electron temperature ratios from crystallography, enables calculation of the frequency evolution, which is in agreement with observations. Complementary detailed MHD modelling of the magnetic configuration and wave modes supports the BAE mode conclusion, by locating an n=1 mode separated from the continuum in the core region. Finally, we have computed the threshold to marginal stability for a range of ion temperature profiles. These suggest the BAE can be driven unstable by energetic ions when the ion temperature radial gradient is sufficiently large. Our findings suggest that mode existence could be used as a form of inference for temperature profile consistency in the radial interval of the mode, thereby extending the tools of MHD spectroscopy.
△ Less
Submitted 20 January, 2013;
originally announced January 2013.
-
Development of a Smart Modulator and Efficiency Evaluation of 500-GeV e+e- C-Band Linear Collider
Authors:
J. S. Oh,
J. S. Bak,
M. H. Cho,
W. Namkung,
K. H. Chung,
T. Shintake,
H. Matsumoto
Abstract:
An e+e- linear collider at 500-GeV C.M. (center of mass) has been proposed as a future accelerator. The C-band linear collider has more than a thousand klystrons and matching modulators. The linear colliders require smart modulators with high reliability, compact and simple configuration, and good power efficiency. This study suggests solutions to problems expected in the future linear colliders…
▽ More
An e+e- linear collider at 500-GeV C.M. (center of mass) has been proposed as a future accelerator. The C-band linear collider has more than a thousand klystrons and matching modulators. The linear colliders require smart modulators with high reliability, compact and simple configuration, and good power efficiency. This study suggests solutions to problems expected in the future linear colliders. A C-band smart modulator has been developed using a constant-current inverter power supply. The smart modulator provides 350-kV pulses of the pulse-to-pulse stability of 0.35%, the pulse-width of 4.35 microseconds, and the repetition rate of 50 Hz. We also investigated the power efficiency for the C-band scheme. A pulse efficiency of 75% can be achieved by an optimized pulse transformer and the RF phase modulation. With pulsed klystrons of 60% power efficiency, it is possible to achieve the RF system efficiency of 32% with the wall-plug power of 170 MW.
△ Less
Submitted 18 August, 2000;
originally announced August 2000.
-
2.856-GHz Modulation of Conventional Triode Electron Gun
Authors:
S. J. Park,
J. S. Oh,
J. S. Bak,
M. H. Cho,
W. Namkung
Abstract:
For the generation of picosecond (< 100 ps) electron beam pulses, we studied the RF modulation of a conventional triode electron gun. The feasibility study for this scheme has been experimentally investigated by modulating a triode gun of the Y-824 cathode-grid (KG) structure provided by the CPI Eimac, with 2.856-GHz pulsed RF generated by a solid-state amplifier (SSA). In this paper, we present…
▽ More
For the generation of picosecond (< 100 ps) electron beam pulses, we studied the RF modulation of a conventional triode electron gun. The feasibility study for this scheme has been experimentally investigated by modulating a triode gun of the Y-824 cathode-grid (KG) structure provided by the CPI Eimac, with 2.856-GHz pulsed RF generated by a solid-state amplifier (SSA). In this paper, we present the methods and results of this investigation.
△ Less
Submitted 13 August, 2000; v1 submitted 11 August, 2000;
originally announced August 2000.