Showing 1–37 of 37 results for author: Bae, W

Data quality control system and long-term performance monitor of the LHAASO-KM2A

Authors: Zhen Cao, F. Aharonian, Axikegu, Y. X. Bai, Y. W. Bao, D. Bastieri, X. J. Bi, Y. J. Bi, W. Bian, A. V. Bukevich, Q. Cao, W. Y. Cao, Zhe Cao, J. Chang, J. F. Chang, A. M. Chen, E. S. Chen, H. X. Chen, Liang Chen, Lin Chen, Long Chen, M. J. Chen, M. L. Chen, Q. H. Chen, S. Chen , et al. (263 additional authors not shown)

Abstract: The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To… ▽ More The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To ensure the reliability of the LHAASO-KM2A data, a three-level quality control system has been established. It is used to monitor the status of detector units, stability of reconstructed parameters and the performance of the array based on observations of the Crab Nebula and Moon shadow. This paper will introduce the control system and its application on the LHAASO-KM2A data collected from August 2021 to July 2023. During this period, the pointing and angular resolution of the array were stable. From the observations of the Moon shadow and Crab Nebula, the results achieved using the two methods are consistent with each other. According to the observation of the Crab Nebula at energies from 25 TeV to 100 TeV, the time averaged pointing errors are estimated to be $-0.003^{\circ} \pm 0.005^{\circ}$ and $0.001^{\circ} \pm 0.006^{\circ}$ in the R.A. and Dec directions, respectively. △ Less

Submitted 13 June, 2024; v1 submitted 20 May, 2024; originally announced May 2024.

Comments: 15 pages, 9 figures

Optimization of WLS fiber readout for the HERD calorimeter

Authors: X. Liu, Z. Quan, Y. W. Dong, M. Xu, J. J. Wang, R. J. Wang, Z. G. Wang, X. Z. Cui, T. W. Bao, C. L. Liao, J. F. Han, Y. Chen

Abstract: A novel 3-D calorimeter, composed of about 7500 LYSO cubes, is the key and crucial detector of the High Energy cosmic-Radiation Detection (HERD) facility to be installed onboard the China Space Station. Energy deposition from cosmic ray in each LYSO cube is translated by multiple wavelength shifting (WLS) fibers for multi-range data acquisition and real-time triggering. In this study, various me… ▽ More A novel 3-D calorimeter, composed of about 7500 LYSO cubes, is the key and crucial detector of the High Energy cosmic-Radiation Detection (HERD) facility to be installed onboard the China Space Station. Energy deposition from cosmic ray in each LYSO cube is translated by multiple wavelength shifting (WLS) fibers for multi-range data acquisition and real-time triggering. In this study, various methods of surface finish and encapsulation of the LYSO cube were investigated to optimize the amplitude from the WLS fiber end with the aim of improving the signal-to-noise ratio of Intensified scientific CMOS (IsCMOS) collection. The LYSO cube with five rough surfaces and a specular reflector achieves the maximum amplitude at the low-range fiber end, which is increased by roughly 44% compared to the polished cube with PTFE wrap**. The non-uniformity of amplitude at different positions on the LYSO cube surface was measured by X-ray and the positional correlation factor was derived for the entire cube. A simulation based on HERD CALO was conducted, which revealed that both the LYSO cube with five rough surfaces and the cube with rough bottom face exhibit superior energy resolution for electrons compared to the other two configurations. △ Less

Submitted 29 August, 2023; originally announced August 2023.

Phase-field simulations for drip**-to-jetting transitions: Effects of low interfacial tension and bulk diffusion

Authors: Fukeng Huang, Weizhu Bao, Tiezheng Qian

Abstract: The drip**-to-jetting transitions in coaxial flows have been experimentally well studied for systems of high interfacial tension, where the capillary number of the outer fluid and the Weber number of the inner fluid are in control. Recent experiments have shown that in systems of low interfacial tension, the transitions driven by the inner flow are no longer dominated by the inertial force alone… ▽ More The drip**-to-jetting transitions in coaxial flows have been experimentally well studied for systems of high interfacial tension, where the capillary number of the outer fluid and the Weber number of the inner fluid are in control. Recent experiments have shown that in systems of low interfacial tension, the transitions driven by the inner flow are no longer dominated by the inertial force alone, and the viscous drag force due to the inner flow is also quantitatively important. In the present work, we carry out numerical simulations based on the Cahn-Hilliard-Navier-Stokes model, aiming for a more complete and quantitative study that is needed for understanding the effects of interfacial tension when it becomes sufficiently low. The Cahn-Hilliard-Navier-Stokes model is solved by using an accurate and efficient spectral method in a cylindrical domain with axisymmetry, and numerical results obtained for jet and drop radii demonstrate the accuracy of our computation. Plenty of numerical examples are systematically presented to show the drip**-to-jetting transitions driven by the outer flow and inner flow respectively. In particular, for transitions dominated by inner flow, detailed results reveal how the magnitude of interfacial tension quantitatively determines the relative importance of the inertial and viscous forces due to the inner flow at the transition point. Our numerical results are found to be consistent with the experimental observation. Finally, the degree of bulk diffusion is varied to investigate its quantitative effect on the condition for the occurrence of transition. Such effect is expected for systems of ultralow interfacial tension where interfacial motion is more likely to be driven by bulk diffusion. △ Less

Submitted 13 July, 2023; originally announced July 2023.

Comments: This article may be downloaded for personal use only. Any other use requires prior permission of the author and AIP Publishing. This article appeared in Phys. Fluids 35, 074105 (2023)

Journal ref: Phys. Fluids 35, 074105 (2023)

Elucidating the Role of Prelithiation in Si-based Anodes for Interface Stabilization

Authors: Shuang Bai, Wurigumula Bao, Kun Qian, Bing Han, Weikang Li, Baharak Sayahpour, Bhagath Screenarayanan, Darren H. S. Tan, So-yeon Ham, Ying Shirley Meng

Abstract: Prelithiation as a facile and effective method to compensate the lithium inventory loss in the initial cycle has progressed considerably both on anode and cathode sides. However, much less research has been devoted to the prelithiation effect on the interface stabilization for long-term cycling of Si-based anodes. An in-depth quantitative analysis of the interface that form during the prelithiatio… ▽ More Prelithiation as a facile and effective method to compensate the lithium inventory loss in the initial cycle has progressed considerably both on anode and cathode sides. However, much less research has been devoted to the prelithiation effect on the interface stabilization for long-term cycling of Si-based anodes. An in-depth quantitative analysis of the interface that form during the prelithiation of SiO$_x$ is presented here and the results are compared with prelithiaton of Si anodes. Local structure probe combined with detailed electrochemical analysis reveals that a characteristic mosaic interface is formed on both prelithiated SiO$_x$ and Si anodes. This mosaic interface containing multiple lithium silicates phases, is fundamentally different from the solid electrolyte interface (SEI) formed without prelithiation. The ideal conductivity and mechanical properties of lithium silicates enable improved cycling stability of both prelithiated anodes. With a higher ratio of lithium silicates due to the oxygen participation, prelithiated SiO$_{1.3}$ anode improves the initial coulombic efficiency to 94% in full cell and delivers good cycling retention after hundreds cycles under lean electrolyte conditions. The insights provided in this work could be used to further optimize high Si loading based anode in future high energy density batteries. △ Less

Submitted 13 April, 2023; originally announced April 2023.

Key Parameters in Determining the Reactivity of Lithium Metal Battery

Authors: Bingyu Lu, Diyi Cheng, Bhagath Sreenarayanan, Weikang Li, Bhargav Bhamwala, Wurigumula Bao, Ying Shirley Meng

Abstract: Lithium (Li) metal anodes are essential for develo** next-generation high-energy-density batteries. Numerous concerns on the potential safety hazards of the Li metal have been brought up before its massive application in commercialized battery packs. However, few investigations have been performed to systematically evaluate the reactivity of Li metal anode in full cell level. Here, differential… ▽ More Lithium (Li) metal anodes are essential for develo** next-generation high-energy-density batteries. Numerous concerns on the potential safety hazards of the Li metal have been brought up before its massive application in commercialized battery packs. However, few investigations have been performed to systematically evaluate the reactivity of Li metal anode in full cell level. Here, differential scanning calorimetry (DSC) with in situ Fourier-transform infrared spectroscopy (FTIR) are used to quantitatively investigate the Li metal reactivity. Lithiated graphite (Li-Gr) and lithiated silicon (Li-Si) are also studied as the comparison samples. The reactivity of the plated Li when coupled with different electrolyte composition, morphology, and atmosphere is systematically studied. More importantly, the reactivity of Li metal full cell with different cathode materials (NMC622, LFP and LNMO) has been compared. It was found that all cell components, including electrolyte composition, Li morphology, the control of inactive Li accumulation and cathode stability, are essential in controlling the reactivity of the plated Li. After optimizing these conditions, the Li metal full cell shows no significant thermal reaction up to 400C. This work identifies the key parameters in controlling the reactivity of the plated Li and may facilitate lithium metal battery design and manufacturing in the coming future. △ Less

Submitted 28 February, 2023; originally announced March 2023.

Reconstruction of Fast Neutron Direction in Segmented Organic Detectors using Deep Learning

Authors: Jun Woo Bae, Tingshiuan C. Wu, Igor Jovanovic

Abstract: A method for reconstructing the direction of a fast neutron source using a segmented organic scintillator-based detector and deep learning model is proposed and analyzed. The model is based on recurrent neural network, which can be trained by a sequence of data obtained from an event recorded in the detector and suitably pre-processed. The performance of deep learning-based model is compared with… ▽ More A method for reconstructing the direction of a fast neutron source using a segmented organic scintillator-based detector and deep learning model is proposed and analyzed. The model is based on recurrent neural network, which can be trained by a sequence of data obtained from an event recorded in the detector and suitably pre-processed. The performance of deep learning-based model is compared with the conventional double-scatter detection algorithm in reconstructing the direction of a fast neutron source. With the deep learning model, the uncertainty in source direction of 0.301 rad is achieved with 100 neutron detection events in a segmented cubic organic scintillator detector with a side length of 46 mm. To reconstruct the source direction with the same angular resolution as the double-scatter algorithm, the deep learning method requires 75% fewer events. Application of this method could augment the operation of segmented detectors operated in the neutron scatter camera configuration for applications such as special nuclear material detection. △ Less

Submitted 25 January, 2023; originally announced January 2023.

Comments: 15 pages. 9 figures. Preprint submitted to Elsevier August 2022

Journal ref: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment (2023) 1049 168024

Diffuse-interface approach to competition between viscous flow and diffusion in pinch-off dynamics

Authors: Fukeng Huang, Weizhu Bao, Tiezheng Qian

Abstract: The pinch-off dynamics of a liquid thread has been studied through numerical simulations and theoretical analysis. Occurring at small length scales, the pinch-off dynamics admits similarity solutions that can be classified into the Stokes regime and the diffusion-dominated regime, with the latter being recently experimentally observed in aqueous two-phase systems [Phys. Rev. Lett. 123, 134501 (201… ▽ More The pinch-off dynamics of a liquid thread has been studied through numerical simulations and theoretical analysis. Occurring at small length scales, the pinch-off dynamics admits similarity solutions that can be classified into the Stokes regime and the diffusion-dominated regime, with the latter being recently experimentally observed in aqueous two-phase systems [Phys. Rev. Lett. 123, 134501 (2019)]. Derived by applying Onsager's variational principle, the Cahn-Hilliard-Navier-Stokes model is employed as a minimal model capable of describing the interfacial motion driven by not only advection but also diffusion. By analyzing the free energy dissipation mechanisms in the model, a characteristic length scale is introduced to measure the competition between diffusion and viscous flow in interfacial motion. This length scale is typically of nanometer scale for systems far from the critical point, but can approach micrometer scale for aqueous two-phase systems close to the critical point. The Cahn-Hilliard-Navier-Stokes model is solved by using an accurate and efficient spectral method in a cylindrical domain with axisymmetry. Ample numerical examples are presented to show the pinch-off processes in the Stokes regime and the diffusion-dominated regime respectively. In particular, the crossover between these two regimes is investigated numerically and analytically to reveal how the scaling behaviors of similarity solutions are to be qualitatively changed as the characteristic length scale is inevitably accessed by the pinching neck of the interface. Discussions are also provided for numerical examples that are performed for the breakup of long liquid filaments and show qualitatively different phenomena in different scaling regimes. △ Less

Submitted 30 August, 2022; v1 submitted 21 July, 2022; originally announced July 2022.

Suppressing chemical corrosions of lithium metal anodes

Authors: Bingyu Lu, Weikang Li, Diyi Cheng, Miguel Ceja, Wurigumula Bao, Chengcheng Fang, Ying Shirley Meng

Abstract: The lithium (Li) metal anode is essential for next generation high energy density rechargeable Li metal batteries. Although extensive studies have been performed to prolong the cycle life of Li metal batteries, the calendar life, which associates with chemical corrosion of Li metal in liquid electrolytes, has not been quantitatively understood. Here, by combing the Titration Gas Chromatography (TG… ▽ More The lithium (Li) metal anode is essential for next generation high energy density rechargeable Li metal batteries. Although extensive studies have been performed to prolong the cycle life of Li metal batteries, the calendar life, which associates with chemical corrosion of Li metal in liquid electrolytes, has not been quantitatively understood. Here, by combing the Titration Gas Chromatography (TGC) method and Cryogenic Focused Ion Beam (Cryo-FIB), we established a quantitative relationship between the chemical corrosion rate and electrochemically deposited Li morphology in various liquid electrolyte systems. We identified that the corrosion rate is dominated by the porosity of the deposited Li. The larger the porosity of deposited Li has, the faster the corrosion rate will be. We further proposed strategies to mitigate the chemical corrosion on Li thus to extend the calendar life of Li metal batteries. By strictly controlling the stacking pressure during Li plating, Li deposits with ultra-low porosity can be achieved, suppressing the corrosion rate to 0.08% per day compared with 1.71% per day of the high-porosity Li. △ Less

Submitted 19 April, 2022; originally announced April 2022.

A structure-preserving finite element approximation of surface diffusion for curve networks and surface clusters

Authors: Weizhu Bao, Harald Garcke, Robert Nürnberg, Quan Zhao

Abstract: We consider the evolution of curve networks in two dimensions (2d) and surface clusters in three dimensions (3d). The motion of the interfaces is described by surface diffusion, with boundary conditions at the triple junction points/lines, where three interfaces meet, and at the boundary points/lines, where an interface meets a fixed planar boundary. We propose a parametric finite element method b… ▽ More We consider the evolution of curve networks in two dimensions (2d) and surface clusters in three dimensions (3d). The motion of the interfaces is described by surface diffusion, with boundary conditions at the triple junction points/lines, where three interfaces meet, and at the boundary points/lines, where an interface meets a fixed planar boundary. We propose a parametric finite element method based on a suitable variational formulation. The constructed method is semi-implicit and can be shown to satisfy the volume conservation of each enclosed bubble and the unconditional energy-stability, thus preserving the two fundamental geometric structures of the flow. Besides, the method has very good properties with respect to the distribution of mesh points, thus no mesh smoothing or regularization technique is required. A generalization of the introduced scheme to the case of anisotropic surface energies and non-neutral external boundaries is also considered. Numerical results are presented for the evolution of two-dimensional curve networks and three-dimensional surface clusters in the cases of both isotropic and anisotropic surface energies. △ Less

Submitted 25 May, 2022; v1 submitted 14 February, 2022; originally announced February 2022.

Comments: 29 figures

Journal ref: Numer. Methods Partial Differential Equations 39 (2023) 759--794

Volume-preserving parametric finite element methods for axisymmetric geometric evolution equations

Authors: Weizhu Bao, Harald Garcke, Robert Nurnberg, Quan Zhao

Abstract: We propose and analyze volume-preserving parametric finite element methods for surface diffusion, conserved mean curvature flow and an intermediate evolution law in an axisymmetric setting. The weak formulations are presented in terms of the generating curves of the axisymmetric surfaces. The proposed numerical methods are based on piecewise linear parametric finite elements. The constructed fully… ▽ More We propose and analyze volume-preserving parametric finite element methods for surface diffusion, conserved mean curvature flow and an intermediate evolution law in an axisymmetric setting. The weak formulations are presented in terms of the generating curves of the axisymmetric surfaces. The proposed numerical methods are based on piecewise linear parametric finite elements. The constructed fully practical schemes satisfy the conservation of the enclosed volume. In addition, we prove the unconditional stability and consider the distribution of vertices for the discretized schemes. The introduced methods are implicit and the resulting nonlinear systems of equations can be solved very efficiently and accurately via the Newton's iterative method. Numerical results are presented to show the accuracy and efficiency of the introduced schemes for computing the considered axisymmetric geometric flows. △ Less

Submitted 26 March, 2022; v1 submitted 26 November, 2021; originally announced November 2021.

Journal ref: J. Comput. Phys. 460 (2022) 111180

LEGEND-1000 Preconceptual Design Report

Authors: LEGEND Collaboration, N. Abgrall, I. Abt, M. Agostini, A. Alexander, C. Andreoiu, G. R. Araujo, F. T. Avignone III, W. Bae, A. Bakalyarov, M. Balata, M. Bantel, I. Barabanov, A. S. Barabash, P. S. Barbeau, C. J. Barton, P. J. Barton, L. Baudis, C. Bauer, E. Bernieri, L. Bezrukov, K. H. Bhimani, V. Biancacci, E. Blalock, A. Bolozdynya , et al. (239 additional authors not shown)

Abstract: We propose the construction of LEGEND-1000, the ton-scale Large Enriched Germanium Experiment for Neutrinoless $ββ$ Decay. This international experiment is designed to answer one of the highest priority questions in fundamental physics. It consists of 1000 kg of Ge detectors enriched to more than 90% in the $^{76}$Ge isotope operated in a liquid argon active shield at a deep underground laboratory… ▽ More We propose the construction of LEGEND-1000, the ton-scale Large Enriched Germanium Experiment for Neutrinoless $ββ$ Decay. This international experiment is designed to answer one of the highest priority questions in fundamental physics. It consists of 1000 kg of Ge detectors enriched to more than 90% in the $^{76}$Ge isotope operated in a liquid argon active shield at a deep underground laboratory. By combining the lowest background levels with the best energy resolution in the field, LEGEND-1000 will perform a quasi-background-free search and can make an unambiguous discovery of neutrinoless double-beta decay with just a handful of counts at the decay $Q$ value. The experiment is designed to probe this decay with a 99.7%-CL discovery sensitivity in the $^{76}$Ge half-life of $1.3\times10^{28}$ years, corresponding to an effective Majorana mass upper limit in the range of 9-21 meV, to cover the inverted-ordering neutrino mass scale with 10 yr of live time. △ Less

Submitted 23 July, 2021; originally announced July 2021.

Alpha backgrounds in the AMoRE-Pilot experiment

Authors: V. Alenkov, H. W. Bae, J. Beyer, R. S. Boiko, K. Boonin, O. Buzanov, N. Chanthima, M. K. Cheoun, S. H. Choi, F. A. Danevich, M. Djamal, D. Drung, C. Enss, A. Fleischmann, A. Gangapshev, L. Gastaldo, Yu. M. Gavriljuk, A. Gezhaev, V. D. Grigoryeva, V. Gurentsov, D. H. Ha, C. Ha, E. J. Ha, I. Hahn, E. J. Jeon , et al. (81 additional authors not shown)

Abstract: The Advanced Mo-based Rare process Experiment (AMoRE)-Pilot experiment is an initial phase of the AMoRE search for neutrinoless double beta decay of $^{100}$Mo, with the purpose of investigating the level and sources of backgrounds. Searches for neutrinoless double beta decay generally require ultimately low backgrounds. Surface $α$ decays on the crystals themselves or nearby materials can deposit… ▽ More The Advanced Mo-based Rare process Experiment (AMoRE)-Pilot experiment is an initial phase of the AMoRE search for neutrinoless double beta decay of $^{100}$Mo, with the purpose of investigating the level and sources of backgrounds. Searches for neutrinoless double beta decay generally require ultimately low backgrounds. Surface $α$ decays on the crystals themselves or nearby materials can deposit a continuum of energies that can be as high as the $Q$-value of the decay itself and may fall in the region of interest (ROI). To understand these background events, we studied backgrounds from radioactive contaminations internal to and on the surface of the crystals or nearby materials with Geant4-based Monte Carlo simulations. In this study, we report on the measured $α$ energy spectra fitted with the corresponding simulated spectra for six crystal detectors, where sources of background contributions could be identified through high energy $α$ peaks and continuum parts in the energy spectrum for both internal and surface contaminations. We determine the low-energy contributions from internal and surface $α$ contaminations by extrapolating from the $α$ background fitting model. △ Less

Submitted 5 December, 2022; v1 submitted 16 July, 2021; originally announced July 2021.

Controlling fingering instabilities in Hele-Shaw flows in the presence of wetting film effects

Authors: Pedro H. A. Anjos, M. Zhao, J. Lowengrub, Weizhu Bao, Shuwang Li

Abstract: In this paper, the interfacial motion between two immiscible viscous fluids in the confined geometry of a Hele-Shaw cell is studied. We consider the influence of a thin wetting film trailing behind the displaced fluid, which dynamically affects the pressure drop at the fluid-fluid interface by introducing a nonlinear dependence on the interfacial velocity. In this framework, two cases of interest… ▽ More In this paper, the interfacial motion between two immiscible viscous fluids in the confined geometry of a Hele-Shaw cell is studied. We consider the influence of a thin wetting film trailing behind the displaced fluid, which dynamically affects the pressure drop at the fluid-fluid interface by introducing a nonlinear dependence on the interfacial velocity. In this framework, two cases of interest are analyzed: The injection-driven flow (expanding evolution), and the lifting plate flow (shrinking evolution). In particular, we investigate the possibility of controlling the development of fingering instabilities in these two different Hele-Shaw setups when wetting effects are taken into account. By employing linear stability theory, we find the proper time-dependent injection rate $Q(t)$ and the time-dependent lifting speed ${\dot b}(t)$ required to control the number of emerging fingers during the expanding and shrinking evolution, respectively. Our results indicate that the consideration of wetting leads to an increase in the magnitude of $Q(t)$ [and ${\dot b}(t)$] in comparison to the non-wetting strategy. Moreover, a spectrally accurate boundary integral approach is utilized to examine the validity and effectiveness of the controlling protocols at the fully nonlinear regime of the dynamics and confirms that the proposed injection and lifting schemes are feasible strategies to prescribe the morphologies of the resulting patterns in the presence of the wetting film. △ Less

Submitted 8 March, 2021; originally announced March 2021.

Comments: 16 pages, 7 figures

Journal ref: Phys. Rev. E 103, 063105 (2021)

Carbon Free High Loading Silicon Anodes Enabled by Sulfide Solid Electrolytes for Robust All Solid-State Batteries

Authors: Darren H. S. Tan, Yu-Ting Chen, Hedi Yang, Wurigumula Bao, Bhagath Sreenarayanan, Jean-Marie Doux, Weikang Li, Bingyu Lu, So-Yeon Ham, Baharak Sayahpour, Jonathan Scharf, Erik A. Wu, Grayson Deysher, Hyea Eun Han, Hoe ** Hah, Hyeri Jeong, Zheng Chen, Ying Shirley Meng

Abstract: The development of silicon anodes to replace conventional graphite in efforts to increase energy densities of lithium-ion batteries has been largely impeded by poor interfacial stability against liquid electrolytes. Here, stable operation of 99.9 weight% micro-Si (uSi) anode is enabled by utilizing the interface passivating properties of sulfide based solid-electrolytes. Bulk to surface characteri… ▽ More The development of silicon anodes to replace conventional graphite in efforts to increase energy densities of lithium-ion batteries has been largely impeded by poor interfacial stability against liquid electrolytes. Here, stable operation of 99.9 weight% micro-Si (uSi) anode is enabled by utilizing the interface passivating properties of sulfide based solid-electrolytes. Bulk to surface characterization, as well as quantification of interfacial components showed that such an approach eliminates continuous interfacial growth and irreversible lithium losses. In uSi || layered-oxide full cells, high current densities at room temperature (5 mA cm 2), wide operating temperature (-20°C to 80°C) and high loadings (>11 mAh cm-2) were demonstrated for both charge and discharge operations. The promising battery performance can be attributed to both the desirable interfacial property between uSi and sulfide electrolytes, as well as the unique chemo-mechanical behavior of the Li-Si alloys. △ Less

Submitted 6 March, 2021; originally announced March 2021.

Comments: 13 pages, 5 figures

Construction and On-site Performance of the LHAASO WFCTA Camera

Authors: F. Aharonian, Q. An, Axikegu, L. X. Bai, Y. X. Bai, Y. W. Bao, D. Bastieri, X. J. Bi, Y. J. Bi, H. Cai, J. T. Cai, Z. Cao, Z. Cao, J. Chang, J. F. Chang, X. C. Chang, B. M. Chen, J. Chen, L. Chen, L. Chen, L. Chen, M. J. Chen, M. L. Chen, Q. H. Chen, S. H. Chen , et al. (234 additional authors not shown)

Abstract: The focal plane camera is the core component of the Wide Field-of-view Cherenkov/fluorescence Telescope Array (WFCTA) of the Large High-Altitude Air Shower Observatory (LHAASO). Because of the capability of working under moonlight without aging, silicon photomultipliers (SiPM) have been proven to be not only an alternative but also an improvement to conventional photomultiplier tubes (PMT) in this… ▽ More The focal plane camera is the core component of the Wide Field-of-view Cherenkov/fluorescence Telescope Array (WFCTA) of the Large High-Altitude Air Shower Observatory (LHAASO). Because of the capability of working under moonlight without aging, silicon photomultipliers (SiPM) have been proven to be not only an alternative but also an improvement to conventional photomultiplier tubes (PMT) in this application. Eighteen SiPM-based cameras with square light funnels have been built for WFCTA. The telescopes have collected more than 100 million cosmic ray events and preliminary results indicate that these cameras are capable of working under moonlight. The characteristics of the light funnels and SiPMs pose challenges (e.g. dynamic range, dark count rate, assembly techniques). In this paper, we present the design features, manufacturing techniques and performances of these cameras. Finally, the test facilities, the test methods and results of SiPMs in the cameras are reported here. △ Less

Submitted 4 July, 2021; v1 submitted 29 December, 2020; originally announced December 2020.

Comments: 45 pages, 21 figures, article

Journal ref: Eur. Phys. J. C 81, 657 (2021)

Accurate and efficient calculation of photoionization in streamer discharges using fast multipole method

Authors: Bo Lin, Chijie Zhuang, Zhenning Cai, Rong Zeng, Weizhu Bao

Abstract: This paper focuses on the three-dimensional simulation of the photoionization in streamer discharges, and provides a general framework to efficiently and accurately calculate the photoionization model using the integral form. The simulation is based on the kernel-independent fast multipole method. The accuracy of this method is studied quantitatively for different domains and various pressures in… ▽ More This paper focuses on the three-dimensional simulation of the photoionization in streamer discharges, and provides a general framework to efficiently and accurately calculate the photoionization model using the integral form. The simulation is based on the kernel-independent fast multipole method. The accuracy of this method is studied quantitatively for different domains and various pressures in comparison with other existing models based on partial differential equations (PDEs). The comparison indicates the numerical error of the fast multipole method is much smaller than those of other PDE-based methods, with the reference solution given by direct numerical integration. Such accuracy can be achieved with affordable computational cost, and its performance in both efficiency and accuracy is quite stable for different domains and pressures. Meanwhile, the simulation accelerated by the fast multipole method exhibits good scalability using up to 1280 cores, which shows its capability of three-dimensional simulations using parallel (distributed) computing. The difference of the proposed method and other efficient approximations are also studied in a three-dimensional dynamic problem where two streamers interact. △ Less

Submitted 22 October, 2020; v1 submitted 5 June, 2020; originally announced June 2020.

Journal ref: Plasma Sources Science and Technology. 2020, 29(12):125010

Multicolor Graphdiyne Random Lasers

Authors: Xiantao Jiang, Xuemei Zhao, Wenli Bao, Rongchao Shi, **lai Zhao, Jianlong Kang, Xuefeng Xia, Hualong Chen, Hongbo Li, Jialiang Xu, Han Zhang

Abstract: By breaking the restriction of mirrors, random lasers from a disordered medium have found unique applications spanning from displays, spectroscopy, biomedical treatments, to Li-Fi.Gain media in the form of two-dimension with distinct physical and chemical properties may lead to the next-generation of random lasers. Graphdiyne, a 2D graphene allotrope with intrigued carbon hybridization, atomic lat… ▽ More By breaking the restriction of mirrors, random lasers from a disordered medium have found unique applications spanning from displays, spectroscopy, biomedical treatments, to Li-Fi.Gain media in the form of two-dimension with distinct physical and chemical properties may lead to the next-generation of random lasers. Graphdiyne, a 2D graphene allotrope with intrigued carbon hybridization, atomic lattice, and optoelectronic properties, has attracted increasing attention recently. Herein, the photon emission characteristics and photo-carrier dynamics in graphdiyne are systematically studied, and the multicolor random lasers have been unprecedently realized using graphdiyne nanosheets as the gain. Considering the well bio-compatibility of graphdiyne, these results may look ahead a plethora of potential applications in the nanotechnology platform based on graphdiyne. △ Less

Submitted 23 March, 2020; originally announced March 2020.

Comments: 19 pages, 5 figures

An energy-stable parametric finite element method for simulating solid-state dewetting

Authors: Quan Zhao, Wei Jiang, Weizhu Bao

Abstract: We propose an energy-stable parametric finite element method (ES-PFEM) for simulating solid-state dewetting of thin films in two dimensions via a sharp-interface model, which is governed by surface diffusion and contact line (point) migration together with proper boundary conditions. By reformulating the relaxed contact angle condition into a Robin-type boundary condition and then treating it as a… ▽ More We propose an energy-stable parametric finite element method (ES-PFEM) for simulating solid-state dewetting of thin films in two dimensions via a sharp-interface model, which is governed by surface diffusion and contact line (point) migration together with proper boundary conditions. By reformulating the relaxed contact angle condition into a Robin-type boundary condition and then treating it as a natural boundary condition, we obtain a new variational formulation for the problem, in which the interface curve and its contact points are evolved simultaneously. Then, the variational problem is discretized in space by using piecewise linear elements. A full discretization is presented by adopting the backward Euler method in time, and the well-posedness and energy dissipation of the full discretization are established. The numerical method is semi-implicit (i.e., a linear system to be solved at each time step and thus efficient), unconditionally energy-stable with respect to the time step, and second-order in space measured by a manifold distance between two curves. In addition, it demonstrates equal mesh distribution when the solution reaches its equilibrium, i.e., long-time dynamics. Numerical results are reported to show accuracy and efficiency as well as some good properties of the proposed numerical method. △ Less

Submitted 5 June, 2020; v1 submitted 3 March, 2020; originally announced March 2020.

Comments: 28 pages, 12 figures

MoS$_2$ Dual-gate Transistors with Electrostatically Doped Contacts

Authors: Fuyou Liao, Yaocheng Sheng, Zhongxun Guo, Hongwei Tang, Yin Wang, Lingyi Zong, Xinyu Chen, Antoine Riaud, Jiahe Zhu, Yufeng Xie, Lin Chen, Hao Zhu, Qingqing Sun, Peng Zhou, Xiangwei Jiang, **g Wan, Wenzhong Bao, David Wei Zhang

Abstract: Two-dimensional (2D) transition metal dichalcogenides (TMDs) such as molybdenum disulfide (MoS2) have been intensively investigated because of their exclusive physical properties for advanced electronics and optoelectronics. In the present work, we study the MoS2 transistor based on a novel tri-gate device architecture, with dual-gate (Dual-G) in the channel and the buried side-gate (Side-G) for t… ▽ More Two-dimensional (2D) transition metal dichalcogenides (TMDs) such as molybdenum disulfide (MoS2) have been intensively investigated because of their exclusive physical properties for advanced electronics and optoelectronics. In the present work, we study the MoS2 transistor based on a novel tri-gate device architecture, with dual-gate (Dual-G) in the channel and the buried side-gate (Side-G) for the source/drain regions. All gates can be independently controlled without interference. For a MoS2 sheet with a thickness of 3.6 nm, the Schottky barrier (SB) and non-overlapped channel region can be effectively tuned by electrostatically do** the source/drain regions with Side-G. Thus, the extrinsic resistance can be effectively lowered, and a boost of the ON-state current can be achieved. Meanwhile, the channel control remains efficient under the Dual-G mode, with an ON-OFF current ratio of 3E7 and subthreshold swing of 83 mV/decade. The corresponding band diagram is also discussed to illustrate the device operation mechanism. This novel device structure opens up a new way toward fabrication of high-performance devices based on 2D-TMDs. △ Less

Submitted 17 December, 2019; originally announced December 2019.

A Dual-gate MoS2 Photodetector Based on Interface Coupling Effect

Authors: Fuyou Liao, Jianan Deng, Xinyu Chen, Yin Wang, Xinzhi Zhang, Jian Liu, Hao Zhu, Lin Chen, Qingqing Sun, Weida Hu, Jianlu Wang, **g Zhou, Peng Zhou, David Wei Zhang, **g Wan, Wenzhong Bao

Abstract: Two-dimensional (2D) transition metal dichalcogenides (TMDs) based photodetectors have shown great potential for the next generation optoelectronics. However, most of the reported MoS2 photodetectors function under the photogating effect originated from the charge-trap mechanism, which is difficult for quantitative control. Such devices generally suffer from a poor compromise between response spee… ▽ More Two-dimensional (2D) transition metal dichalcogenides (TMDs) based photodetectors have shown great potential for the next generation optoelectronics. However, most of the reported MoS2 photodetectors function under the photogating effect originated from the charge-trap mechanism, which is difficult for quantitative control. Such devices generally suffer from a poor compromise between response speed and responsivity (R) and large dark current. Here, a dual-gated (DG) MoS2 phototransistor operating based on the interface coupling effect (ICE) is demonstrated. By simultaneously applying a negative top-gate voltage (VTG) and positive back-gate voltage (VBG) to the MoS2 channel, the photo-generated holes can be effectively trapped in the depleted region under TG. An ultrahigh R of ~1E5 A/W and detectivity (D*) of ~1E14 Jones have been achieved in several devices with different thickness under Pin of 53 uW/cm2 at VTG=-5 V. Moreover, the response time of the DG phototransistor can also be modulated based on the ICE. Based on these systematic measurements of MoS2 DG phototransistors, the results show that the ICE plays an important role in the modulation of photoelectric performances. Our results also pave the way for the future optoelectrical application of 2D TMDs materials and prompt for further investigation in the DG structured phototransistors. △ Less

Submitted 17 December, 2019; originally announced December 2019.

High-Performance Logic and Memory Devices Based on a Dual-Gated MoS2 Architecture

Authors: Fuyou Liao, Zhongxun Guo, Yin Wang, Yufeng Xie, Simeng Zhang, Yaochen Sheng, Hongwei Tang, Zihan Xu, Antoine Riaud, Peng Zhou, **g Wan, Michael S. Fuhrer, Xiangwei Jiang, David Wei Zhang, Yang Chai, Wenzhong Bao

Abstract: In this work, we demonstrate a dual-gated (DG) MoS2 field effect transistors (FETs) in which the degraded switching performance of multilayer MoS2 can be compensated by the DG structure. It produces large current density (>100 μA/μm for a monolayer), steep subthreshold swing (SS) (~100 mV/dec for 5 nm thickness), and high on/off current ratio (greater than 107 for 10 nm thickness). Such DG structu… ▽ More In this work, we demonstrate a dual-gated (DG) MoS2 field effect transistors (FETs) in which the degraded switching performance of multilayer MoS2 can be compensated by the DG structure. It produces large current density (>100 μA/μm for a monolayer), steep subthreshold swing (SS) (~100 mV/dec for 5 nm thickness), and high on/off current ratio (greater than 107 for 10 nm thickness). Such DG structure not only improves electrostatic control but also provides an extra degree of freedom for manipulating the threshold voltage (VTH) and SS by separately tuning the top and back gate voltages, which are demonstrated in a logic inverter. Dynamic random access memory (DRAM) has a short retention time because of large OFF-state current in the Si MOSFET. Based on our DG MoS2-FETs, and a DRAM unit cell with a long retention time of 1260 ms are realized. A large-scale isolated MoS2 DG-FETs based on CVD-synthesized continuous films is also demonstrated, which shows potential applications for future wafer-scale digital and low-power electronics. △ Less

Submitted 17 December, 2019; originally announced December 2019.

Computing ground states of Bose-Einstein Condensates with higher order interaction via a regularized density function formulation

Authors: Weizhu Bao, Xinran Ruan

Abstract: We propose and analyze a new numerical method for computing the ground state of the modified Gross-Pitaevskii equation for modeling the Bose-Einstein condensate with a higher order interaction by adapting the density function formulation and the accelerated projected gradient method. By reformulating the energy functional $E(φ)$ with $φ$, the wave function, in terms of the density $ρ=|φ|^2$, the o… ▽ More We propose and analyze a new numerical method for computing the ground state of the modified Gross-Pitaevskii equation for modeling the Bose-Einstein condensate with a higher order interaction by adapting the density function formulation and the accelerated projected gradient method. By reformulating the energy functional $E(φ)$ with $φ$, the wave function, in terms of the density $ρ=|φ|^2$, the original non-convex minimization problem for defining the ground state is then reformulated to a convex minimization problem. In order to overcome the semi-smoothness of the function $\sqrtρ$ in the kinetic energy part, a regularization is introduced with a small parameter $0<\varepsilon\ll1$. Convergence of the regularization is established when $\varepsilon\to0$. The regularized convex optimization problem is discretized by the second order finite difference method. The convergence rates in terms of the density and energy of the discretization are established. The accelerated projected gradient method is adapted for solving the discretized optimization problem. Numerical results are reported to demonstrate the efficiency and accuracy of the proposed numerical method. Our results show that the proposed method is much more efficient than the existing methods in the literature, especially in the strong interaction regime. △ Less

Submitted 24 August, 2019; originally announced August 2019.

Comments: 26 pages, 5 figures

MSC Class: 35Q55; 65N06; 65N25; 90C30

A parametric finite element method for solid-state dewetting problems in three dimensions

Authors: Quan Zhao, Wei Jiang, Weizhu Bao

Abstract: We propose a parametric finite element method (PFEM) for efficiently solving the morphological evolution of solid-state dewetting of thin films on a flat rigid substrate in three dimensions (3D). The interface evolution of the dewetting problem in 3D is described by a sharp-interface model, which includes surface diffusion coupled with contact line migration. A variational formulation of the sharp… ▽ More We propose a parametric finite element method (PFEM) for efficiently solving the morphological evolution of solid-state dewetting of thin films on a flat rigid substrate in three dimensions (3D). The interface evolution of the dewetting problem in 3D is described by a sharp-interface model, which includes surface diffusion coupled with contact line migration. A variational formulation of the sharp-interface model is presented, and a PFEM is proposed for spatial discretization. For temporal discretization, at each time step, we first update the position of the contact line according to the relaxed contact angle condition; then, by using the position of the new contact line as the boundary condition, we solve a linear algebra system resulted from the discretization of PFEM to obtain the new interface surface for the next step. The well-posedness of the solution of the PFEM is also established. Extensive numerical results are reported to demonstrate the accuracy and efficiency of the proposed PFEM and to show the complexities of the dewetting morphology evolution observed in solid-state dewetting experiments. △ Less

Submitted 23 August, 2019; v1 submitted 22 August, 2019; originally announced August 2019.

Comments: 25 pages, 20 figures

Journal ref: SIAM Journal on Scientific Computing, 2020

General-purpose quantum circuit simulator with Projected Entangled-Pair States and the quantum supremacy frontier

Authors: Chu Guo, Yong Liu, Min Xiong, Shichuan Xue, Xiang Fu, Anqi Huang, Xiaogang Qiang, ** Xu, Junhua Liu, Shenggen Zheng, He-Liang Huang, Mingtang Deng, Dario Poletti, Wan-Su Bao, Junjie Wu

Abstract: Recent advances on quantum computing hardware have pushed quantum computing to the verge of quantum supremacy. Random quantum circuits are outstanding candidates to demonstrate quantum supremacy, which could be implemented on a quantum device that supports nearest-neighbour gate operations on a two-dimensional configuration. Here we show that using the Projected Entangled-Pair States algorithm, a… ▽ More Recent advances on quantum computing hardware have pushed quantum computing to the verge of quantum supremacy. Random quantum circuits are outstanding candidates to demonstrate quantum supremacy, which could be implemented on a quantum device that supports nearest-neighbour gate operations on a two-dimensional configuration. Here we show that using the Projected Entangled-Pair States algorithm, a tool to study two-dimensional strongly interacting many-body quantum systems, we can realize an effective general-purpose simulator of quantum algorithms. This technique allows to quantify precisely the memory usage and the time requirements of random quantum circuits, thus showing the frontier of quantum supremacy. With this approach we can compute the full wave-function of the system, from which single amplitudes can be sampled with unit fidelity. Applying this general quantum circuit simulator we measured amplitudes for a $7\times 7$ lattice of qubits with depth $1+40+1$ and double-precision numbers in 31 minutes using less than $93$ TB memory on the Tianhe-2 supercomputer. △ Less

Submitted 4 November, 2019; v1 submitted 20 May, 2019; originally announced May 2019.

Comments: 10 pages, 6 figures, 1 table

Journal ref: Phys. Rev. Lett. 123, 190501 (2019)

First Results from the AMoRE-Pilot neutrinoless double beta decay experiment

Authors: V. Alenkov, H. W. Bae, J. Beyer, R. S. Boiko, K. Boonin, O. Buzanov, N. Chanthima, M. K. Cheoun, D. M. Chernyak, J. S. Choe, S. Choi, F. A. Danevich, M. Djamal, D. Drung, C. Enss, A. Fleischmann, A. M. Gangapshev, L. Gastaldo, Yu. M. Gavriljuk, A. M. Gezhaev, V. D. Grigoryeva, V. I. Gurentsov, O. Gylova, C. Ha, D. H. Ha , et al. (84 additional authors not shown)

Abstract: The Advanced Molybdenum-based Rare process Experiment (AMoRE) aims to search for neutrinoless double beta decay (0$νββ$) of $^{100}$Mo with $\sim$100 kg of $^{100}$Mo-enriched molybdenum embedded in cryogenic detectors with a dual heat and light readout. At the current, pilot stage of the AMoRE project we employ six calcium molybdate crystals with a total mass of 1.9 kg, produced from $^{48}$Ca-de… ▽ More The Advanced Molybdenum-based Rare process Experiment (AMoRE) aims to search for neutrinoless double beta decay (0$νββ$) of $^{100}$Mo with $\sim$100 kg of $^{100}$Mo-enriched molybdenum embedded in cryogenic detectors with a dual heat and light readout. At the current, pilot stage of the AMoRE project we employ six calcium molybdate crystals with a total mass of 1.9 kg, produced from $^{48}$Ca-depleted calcium and $^{100}$Mo-enriched molybdenum ($^{48\textrm{depl}}$Ca$^{100}$MoO$_4$). The simultaneous detection of heat(phonon) and scintillation (photon) signals is realized with high resolution metallic magnetic calorimeter sensors that operate at milli-Kelvin temperatures. This stage of the project is carried out in the Yangyang underground laboratory at a depth of 700 m. We report first results from the AMoRE-Pilot $0νββ$ search with a 111 kg$\cdot$d live exposure of $^{48\textrm{depl}}$Ca$^{100}$MoO$_4$ crystals. No evidence for $0νββ$ decay of $^{100}$Mo is found, and a upper limit is set for the half-life of 0$νββ$ of $^{100}$Mo of $T^{0ν}_{1/2} > 9.5\times10^{22}$ y at 90% C.L.. This limit corresponds to an effective Majorana neutrino mass limit in the range $\langle m_{ββ}\rangle\le(1.2-2.1)$ eV. △ Less

Submitted 7 May, 2019; v1 submitted 22 March, 2019; originally announced March 2019.

Interaction position, time, and energy resolution in organic scintillator bars with dual-ended readout

Authors: Melinda Sweany, Aline Galindo-Tellez, Joshua Brown, Erik Brubaker, Ryan Dorrill, Andrew Druetzler, Nathaniel Kaneshige, John Learned, Kurtis Nishimura, Wonseok Bae

Abstract: We report on the position, timing, and energy resolution of a range of plastic scintillator bars and reflector treatments using dual-ended silicon photomultiplier readout. These measurements are motivated by the upcoming construction of an optically segmented single-volume neutron scatter camera, in which neutron elastic scattering off of hydrogen is used to kinematically reconstruct the source di… ▽ More We report on the position, timing, and energy resolution of a range of plastic scintillator bars and reflector treatments using dual-ended silicon photomultiplier readout. These measurements are motivated by the upcoming construction of an optically segmented single-volume neutron scatter camera, in which neutron elastic scattering off of hydrogen is used to kinematically reconstruct the source direction and energy of an incoming neutron. For this application, interaction position resolutions of about 10 mm and timing resolutions of about 1 ns are necessary to achieve the desired efficiency for fission-energy neutrons. The results presented here indicate that this is achievable with an array of $5\times5\times190~\mathrm{mm}^3$ bars of EJ-204 scintillator wrapped in Teflon tape, read out with SensL's J-series $6\times6~\mathrm{mm}^2$ silicon photomultipliers. With two independent setups, we also explore the systematic variability of the position resolution, and show that, in general, using the difference in the pulse arrival time at the two ends is less susceptible to systematic variation than using the log ratio of the charge amplitude of the two ends. Finally, we measure a bias in the absolute time of interactions as a function of position along the bar: the measured interaction time for events at the center of the bar is $\sim$100 ps later than interactions near the SiPM. △ Less

Submitted 20 February, 2019; originally announced February 2019.

An efficient and accurate MPI based parallel simulator for streamer discharges in three dimensions

Authors: Bo Lin, Chijie Zhuang, Zhenning Cai, Rong Zeng, Weizhu Bao

Abstract: In this paper, we propose an efficient and accurate message-passing interface (MPI)-based parallel simulator for streamer discharges in three dimensions using the fluid model. First, we propose a new second-order semi-implicit scheme for the temporal discretization of the model that relaxes the dielectric relaxation time restriction. Moreover, it requires solving the Poisson-type equation only onc… ▽ More In this paper, we propose an efficient and accurate message-passing interface (MPI)-based parallel simulator for streamer discharges in three dimensions using the fluid model. First, we propose a new second-order semi-implicit scheme for the temporal discretization of the model that relaxes the dielectric relaxation time restriction. Moreover, it requires solving the Poisson-type equation only once at each time step, while the classical second-order explicit scheme typically needs to do twice. Second, we introduce a geometric multigrid preconditioned FGMRES solver that dramatically improves the efficiency of solving the Poisson-type equation with either constant or variable coefficients. We show numerically that no more than 4 iterations are required for the Poisson solver to converge to a relative residual of $10^{-8}$ during streamer simulations; the FGMRES solver is much faster than R&B SOR and other Krylov subspace solvers. Last but not least, all the methods are implemented using MPI. The parallel efficiency of the code and the fast algorithmic performances are demonstrated by a series of numerical experiments using up to 2560 cores on the Tianhe2-JK clusters. For applications, we study a double-headed streamer discharge as well as the interaction between two streamers, using up to 10.7 billion mesh cells. △ Less

Submitted 17 September, 2019; v1 submitted 18 December, 2018; originally announced December 2018.

Journal ref: Journal of Computational Physics. 2020, 401:109026

Neutron and muon-induced background studies for the AMoRE double-beta decay experiment

Authors: H. W. Bae, E. J. Jeon, Y. D. Kim, S. W. Lee

Abstract: AMoRE (Advanced Mo-based Rare process Experiment) is an experiment to search a neutrinoless double-beta decay of $^{100}$Mo in molybdate crystals. The neutron and muon-induced backgrounds are crucial to obtain the zero-background level (<$10^{-5}$ counts/(keV$\cdot$kg$\cdot$yr)) for the AMoRE-II experiment, which is the second phase of the AMoRE project, planned to run at YEMI underground laborato… ▽ More AMoRE (Advanced Mo-based Rare process Experiment) is an experiment to search a neutrinoless double-beta decay of $^{100}$Mo in molybdate crystals. The neutron and muon-induced backgrounds are crucial to obtain the zero-background level (<$10^{-5}$ counts/(keV$\cdot$kg$\cdot$yr)) for the AMoRE-II experiment, which is the second phase of the AMoRE project, planned to run at YEMI underground laboratory. To evaluate the effects of neutron and muon-induced backgrounds, we performed Geant4 Monte Carlo simulations and studied a shielding strategy for the AMORE-II experiment. Neutron-induced backgrounds were also included in the study. In this paper, we estimated the background level in the presence of possible shielding structures, which meet the background requirement for the AMoRE-II experiment. △ Less

Submitted 27 June, 2019; v1 submitted 18 December, 2018; originally announced December 2018.

Breaking Pauli blockade via ultrafast cooling of hot electrons in optically-pumped graphene

Authors: Yingying Zhu, Lianzi Liu, Jianan Wang, Ruwen Peng, Dongxiang Qi, Wenzhong Bao, Renhao Fan, Mu Wang

Abstract: Pauli blockade occurs when the excited electrons fill up the states near the conduction bands and block subsequent absorption in semiconductors, and has been widely applied in mode-locking for passively-pulsed-laser systems. In this letter, we report the first direct observation that the Pauli blockade is broken by ultrafast cooling of hot electrons in optically-pumped graphene. With femtosecond s… ▽ More Pauli blockade occurs when the excited electrons fill up the states near the conduction bands and block subsequent absorption in semiconductors, and has been widely applied in mode-locking for passively-pulsed-laser systems. In this letter, we report the first direct observation that the Pauli blockade is broken by ultrafast cooling of hot electrons in optically-pumped graphene. With femtosecond spectroscopy, we demonstrate that the time scale to excite an electron (~100 fs) is of the same order as that of the electron decay via electron-electron scattering, which allows the electron excitation interplays strongly with the cooling of hot electrons. Consequently, Pauli blockade is dismissed, leading to an unconventionally enhanced optical absorption. We suggest that this effect is a universal feature of two-dimensional layered materials, which sheds the light of ultrafast carrier dynamics in nonlinear physics and inspires the designing of new-generation of ultrafast optoelectronic devices. △ Less

Submitted 13 July, 2018; v1 submitted 12 June, 2018; originally announced June 2018.

Comments: 5 pages and 5 figures

Instrument Performance and Simulation Verification of the POLAR Detector

Authors: M. Kole, Z. H. Li, N. Produit, T. Tymieniecka, J. Zhang, A. Zwolinska, T. W. Bao, T. Bernasconi, F. Cadoux, M. Z. Feng, N. Gauvin, W. Hajdas, S. W. Kong, H. C. Li, L. Li, X. Liu, R. Marcinkowski, S. Orsi, M. Pohl, D. Rybka, J. C. Sun, L. M. Song, J. Szabelski, R. J. Wang, Y. H. Wang , et al. (10 additional authors not shown)

Abstract: POLAR is a new satellite-born detector aiming to measure the polarization of an unprecedented number of Gamma-Ray Bursts in the 50-500 keV energy range. The instrument, launched on-board the Tiangong-2 Chinese Space lab on the 15th of September 2016, is designed to measure the polarization of the hard X-ray flux by measuring the distribution of the azimuthal scattering angles of the incoming photo… ▽ More POLAR is a new satellite-born detector aiming to measure the polarization of an unprecedented number of Gamma-Ray Bursts in the 50-500 keV energy range. The instrument, launched on-board the Tiangong-2 Chinese Space lab on the 15th of September 2016, is designed to measure the polarization of the hard X-ray flux by measuring the distribution of the azimuthal scattering angles of the incoming photons. A detailed understanding of the polarimeter and specifically of the systematic effects induced by the instrument's non-uniformity are required for this purpose. In order to study the instrument's response to polarization, POLAR underwent a beam test at the European Synchrotron Radiation Facility in France. In this paper both the beam test and the instrument performance will be described. This is followed by an overview of the Monte Carlo simulation tools developed for the instrument. Finally a comparison of the measured and simulated instrument performance will be provided and the instrument response to polarization will be presented. △ Less

Submitted 2 August, 2017; originally announced August 2017.

Comments: Preprint Accepted for Publication in Nuclear Instruments and Methods in Physics Research A

Calibration of the Space-borne Compton Polarimeter POLAR flight model with 100% polarized X-ray beams

Authors: H. L. Xiao, W. Hajdas, P. Socha, R. Marcinkowski, B. B. Wu, T. W. Bao, J. Y. Chai, Y. W. Dong, M. N. Kong, L. Li, Z. H. Li, J. T. Liu, H. L. Shi, L. M. Song, J. C. Sun, R. J. Wang, Y. H. Wang, X. Wen, S. L. Xiong, J. Zhang, L. Y. Zhang, S. N. Zhang, X. F. Zhang, Y. J. Zhang, F. Cadoux , et al. (10 additional authors not shown)

Abstract: POLAR is space-borne detector designed for a precise measurement of gamma-ray polarization of the prompt emissions of Gamma-Ray Bursts in the energy range 50 keV - 500 keV. POLAR is a compact Compton polarimeter consisting of 40$\times$ 40 plastic scintillator bars read out by 25 multi-anode PMTs. In May 2015, we performed a series of tests of the POLAR flight model with 100\% polarized x-rays bea… ▽ More POLAR is space-borne detector designed for a precise measurement of gamma-ray polarization of the prompt emissions of Gamma-Ray Bursts in the energy range 50 keV - 500 keV. POLAR is a compact Compton polarimeter consisting of 40$\times$ 40 plastic scintillator bars read out by 25 multi-anode PMTs. In May 2015, we performed a series of tests of the POLAR flight model with 100\% polarized x-rays beams at the European Synchrotron Radiation Facility beam-line ID11 aming to study thresholds, crosstalk between channels and responses of POLAR flight model to polarized X-ray beams. In this paper we present the data analysis method and some analysis results. According the results, POLAR FM has good polarimetric capabilities. △ Less

Submitted 24 April, 2017; v1 submitted 20 April, 2017; originally announced April 2017.

Comments: The paper was withdrawn by authors because the work has not yet finshed

Gain factor and parameter settings optimization of the new gamma-ray burst polarimeter POLAR

Authors: X. F. Zhang, W. Hajdas, H. L. Xiao, X. Wen, B. B. Wu, T. W. Bao, T. Batsch, T. Bernasconi, F. Cadoux, I. Cernuda, J. Y. Chai, Y. W. Dong, N. Gauvin, J. J. He, M. Kole, M. N. Kong, C. Lechanoine-Leluc, L. Li, Z. H. Li, J. T. Liu, X. Liu, R. Marcinkowski, S. Orsi, M. Pohl, D. Rapin , et al. (16 additional authors not shown)

Abstract: As a space-borne detector POLAR is designed to conduct hard X-ray polarization measurements of gamma-ray bursts on the statistically significant sample of events and with an unprecedented accuracy. During its development phase a number of tests, calibrations runs and verification measurements were carried out in order to validate instrument functionality and optimize operational parameters. In thi… ▽ More As a space-borne detector POLAR is designed to conduct hard X-ray polarization measurements of gamma-ray bursts on the statistically significant sample of events and with an unprecedented accuracy. During its development phase a number of tests, calibrations runs and verification measurements were carried out in order to validate instrument functionality and optimize operational parameters. In this article we present results on gain optimization togeter with verification data obtained in the course of broad laboratory and environmental tests. In particular we focus on exposures to the $^{137}$Cs radioactive source and determination of the gain dependence on the high voltage for all 1600 detection channels of the polarimeter. Performance of the instrument is described in detail with respect to the dynamic range, energy resolution and temperature dependence. Gain optimization algorithms and response non-uniformity studies are also broadly discussed. Results presented below constitute important parts for development of the POLAR calibration and operation database. △ Less

Submitted 14 March, 2017; v1 submitted 12 March, 2017; originally announced March 2017.

Comments: There still some disagreement about one of the conclusions presented in the paper among all the authors

Homomorphic Encryption Experiments on IBM's Cloud Quantum Computing Platform

Authors: He-Liang Huang, You-Wei Zhao, Tan Li, Feng-Guang Li, Yu-Tao Du, Xiang-Qun Fu, Shuo Zhang, Xiang Wang, Wan-Su Bao

Abstract: Quantum computing has undergone rapid development in recent years. Owing to limitations on scalability, personal quantum computers still seem slightly unrealistic in the near future. The first practical quantum computer for ordinary users is likely to be on the cloud. However, the adoption of cloud computing is possible only if security is ensured. Homomorphic encryption is a cryptographic protoco… ▽ More Quantum computing has undergone rapid development in recent years. Owing to limitations on scalability, personal quantum computers still seem slightly unrealistic in the near future. The first practical quantum computer for ordinary users is likely to be on the cloud. However, the adoption of cloud computing is possible only if security is ensured. Homomorphic encryption is a cryptographic protocol that allows computation to be performed on encrypted data without decrypting them, so it is well suited to cloud computing. Here, we first applied homomorphic encryption on IBM's cloud quantum computer platform. In our experiments, we successfully implemented a quantum algorithm for linear equations while protecting our privacy. This demonstration opens a feasible path to the next stage of development of cloud quantum information technology. △ Less

Submitted 2 July, 2017; v1 submitted 8 December, 2016; originally announced December 2016.

Comments: 5 pages, 5 figures

Journal ref: Frontiers of Physics, 12(1), 120305 (2017)

Calibration of Gamma-ray Burst Polarimeter POLAR

Authors: H. L. Xiao, W. Hajdas, T. W. Bao, T. Batsch, T. Bernasconi, I. Cernuda, J. Y. Chai, Y. W. Dong, N. Gauvin, M. Kole, M. N. Kong, S. W. Kong, L. Li, J. T. Liu, X. Liu, R. Marcinkowski, S. Orsi, M. Pohl, N. Produit, D. Rapin, A. Rutczynska, D. Rybka, H. L. Shi, L. M. Song, J. C. Sun , et al. (11 additional authors not shown)

Abstract: Gamma Ray Bursts (GRBs) are the strongest explosions in the universe which might be associated with creation of black holes. Magnetic field structure and burst dynamics may influence polarization of the emitted gamma-rays. Precise polarization detection can be an ultimate tool to unveil the true GRB mechanism. POLAR is a space-borne Compton scattering detector for precise measurements of the GRB p… ▽ More Gamma Ray Bursts (GRBs) are the strongest explosions in the universe which might be associated with creation of black holes. Magnetic field structure and burst dynamics may influence polarization of the emitted gamma-rays. Precise polarization detection can be an ultimate tool to unveil the true GRB mechanism. POLAR is a space-borne Compton scattering detector for precise measurements of the GRB polarization. It consists of a 40$\times$40 array of plastic scintillator bars read out by 25 multi-anode PMTs (MaPMTs). It is scheduled to be launched into space in 2016 onboard of the Chinese space laboratory TG2. We present a dedicated methodology for POLAR calibration and some calibration results based on the combined use of the laboratory radioactive sources and polarized X-ray beams from the European Synchrotron Radiation Facility. They include calibration of the energy response, computation of the energy conversion factor vs. high voltage as well as determination of the threshold values, crosstalk contributions and polarization modulation factors. △ Less

Submitted 9 December, 2015; originally announced December 2015.

Comments: 2015 IEEE NSS conference proceedings

A polarizing situation: Taking an in-plane perspective for next-generation near-field studies

Authors: P. James Schuck, Wei Bao, Nicholas J. Borys

Abstract: This mini-review provides a perspective on recent progress and emerging directions aimed at utilizing and controlling in-plane optical polarization, highlighting key application spaces where in-plane near-field tip responses have enabled recent advancements in the understanding and development of new nanostructured materials and devices. This mini-review provides a perspective on recent progress and emerging directions aimed at utilizing and controlling in-plane optical polarization, highlighting key application spaces where in-plane near-field tip responses have enabled recent advancements in the understanding and development of new nanostructured materials and devices. △ Less

Submitted 8 December, 2015; originally announced December 2015.

Accurate and efficient numerical methods for computing ground states and dynamics of dipolar Bose-Einstein condensates via the nonuniform FFT

Authors: Weizhu Bao, Qinglin Tang, Yong Zhang

Abstract: In this paper, we propose efficient and accurate numerical methods for computing the ground state and dynamics of the dipolar Bose-Einstein condensates utilising a newly developed dipole-dipole interaction (DDI) solver that is implemented with the non-uniform fast Fourier transform (NUFFT) algorithm. We begin with the three-dimensional (3D) Gross-Pitaevskii equation (GPE) with a DDI term and prese… ▽ More In this paper, we propose efficient and accurate numerical methods for computing the ground state and dynamics of the dipolar Bose-Einstein condensates utilising a newly developed dipole-dipole interaction (DDI) solver that is implemented with the non-uniform fast Fourier transform (NUFFT) algorithm. We begin with the three-dimensional (3D) Gross-Pitaevskii equation (GPE) with a DDI term and present the corresponding two-dimensional (2D) model under a strongly anisotropic confining potential. Different from existing methods, the NUFFT based DDI solver removes the singularity by adopting the spherical/polar coordinates in Fourier space in 3D/2D, respectively, thus it can achieve spectral accuracy in space and simultaneously maintain high efficiency by making full use of FFT and NUFFT whenever it is necessary and/or needed. Then, we incorporate this solver into existing successful methods for computing the ground state and dynamics of GPE with a DDI for dipolar BEC. Extensive numerical comparisons with existing methods are carried out for computing the DDI, ground states and dynamics of the dipolar BEC. Numerical results show that our new methods outperform existing methods in terms of both accuracy and efficiency. △ Less

Submitted 11 April, 2015; originally announced April 2015.

Comments: 26 pages, 5 figures

Journal ref: Commun. Comput. Phys., Vol. 19 (2016), pp. 1141-1166

Infrared nanoscopy of Dirac plasmons at the graphene-SiO2 interface

Authors: Zhe Fei, Gregory O. Andreev, Wenzhong Bao, Lingfeng M. Zhang, Alexander S. McLeod, Chen Wang, Magaret K. Stewart, Zeng Zhao, Gerardo Dominguez, Mark Thiemens, Michael M. Fogler, Michael J. Tauber, Antonio H. Castro-Neto, Chun Ning Lau, Fritz Keilmann, Dimitri N. Basov

Abstract: We report on infrared (IR) nanoscopy of 2D plasmon excitations of Dirac fermions in graphene. This is achieved by confining mid-IR radiation at the apex of a nanoscale tip: an approach yielding two orders of magnitude increase in the value of in-plane component of incident wavevector q compared to free space propagation. At these high wavevectors, the Dirac plasmon is found to dramatically enhance… ▽ More We report on infrared (IR) nanoscopy of 2D plasmon excitations of Dirac fermions in graphene. This is achieved by confining mid-IR radiation at the apex of a nanoscale tip: an approach yielding two orders of magnitude increase in the value of in-plane component of incident wavevector q compared to free space propagation. At these high wavevectors, the Dirac plasmon is found to dramatically enhance the near-field interaction with mid-IR surface phonons of SiO2 substrate. Our data augmented by detailed modeling establish graphene as a new medium supporting plasmonic effects that can be controlled by gate voltage. △ Less

Submitted 2 December, 2011; originally announced December 2011.

Comments: 12 pages, 4 figures

Journal ref: Nano Lett., 2011, 11 (11), pp 4701-4705