-
Energy Consumption of Plant Factory with Artificial Light: Challenges and Opportunities
Authors:
Wenyi Cai,
Kunlang Bu,
Lingyan Zha,
**g** Zhang,
Dayi Lai,
Hua Bao
Abstract:
Plant factory with artificial light (PFAL) is a promising technology for relieving the food crisis, especially in urban areas or arid regions endowed with abundant resources. However, lighting and HVAC (heating, ventilation, and air conditioning) systems of PFAL have led to much greater energy consumption than open-field and greenhouse farming, limiting the application of PFAL to a wider extent. R…
▽ More
Plant factory with artificial light (PFAL) is a promising technology for relieving the food crisis, especially in urban areas or arid regions endowed with abundant resources. However, lighting and HVAC (heating, ventilation, and air conditioning) systems of PFAL have led to much greater energy consumption than open-field and greenhouse farming, limiting the application of PFAL to a wider extent. Recent researches pay much more attention to the optimization of energy consumption in order to develop and promote the PFAL technology with reduced energy usage. This work comprehensively summarizes the current energy-saving methods on lighting, HVAC systems, as well as their coupling methods for a more energy-efficient PFAL. Besides, we offer our perspectives on further energy-saving strategies and exploit the renewable energy resources for PFAL to respond to the urgent need for energy-efficient production.
△ Less
Submitted 11 May, 2024;
originally announced May 2024.
-
Wavelet-based resolvent analysis of non-stationary flows
Authors:
Eric Ballouz,
Barbara Lopez-Doriga,
Scott T. M. Dawson,
H. Jane Bae
Abstract:
This work introduces a formulation of resolvent analysis that uses wavelet transforms rather than Fourier transforms in time. Under this formulation, resolvent analysis may extend to turbulent flows with non-stationary mean states; the optimal resolvent modes are augmented with a temporal dimension and are able to encode the time-transient trajectories that are most amplified by the linearised Nav…
▽ More
This work introduces a formulation of resolvent analysis that uses wavelet transforms rather than Fourier transforms in time. Under this formulation, resolvent analysis may extend to turbulent flows with non-stationary mean states; the optimal resolvent modes are augmented with a temporal dimension and are able to encode the time-transient trajectories that are most amplified by the linearised Navier-Stokes equations. We first show that the wavelet- and Fourier-based resolvent analyses give equivalent results for statistically-stationary flow by applying them to turbulent channel flow. We then use wavelet-based resolvent analysis to study the transient growth mechanism in the logarithmic layer of a turbulent channel flow by windowing the resolvent operator in time and frequency. The computed principal resolvent response mode, i.e. the velocity field optimally amplified by the linearised dynamics of the flow, exhibits the Orr mechanism, supporting the claim that this mechanism is key to linear transient energy growth. We also apply this method to non-stationary parallel shear flows such as an oscillating boundary layer, and three-dimensional channel flow in which a sudden spanwise pressure gradient perturbs a fully-developed turbulent channel flow. In both cases, wavelet-based resolvent analysis yields modes that are sensitive to the changing mean profile of the flow. For the oscillating boundary layer, wavelet-based resolvent analysis produces oscillating principal forcing and response modes that peak at times and wall-normal locations associated with high turbulent activity. For the three-dimensional turbulent channel flow, the resolvent modes gradually realign themselves with the mean flow as it deviates.
△ Less
Submitted 9 April, 2024;
originally announced April 2024.
-
Sparse space-time resolvent analysis for statistically-stationary and time-varying flows
Authors:
Barbara Lopez-Doriga,
Eric Ballouz,
H. Jane Bae,
Scott T. M. Dawson
Abstract:
Resolvent analysis provides a framework to predict coherent spatio-temporal structures of largest linear energy amplification, through a singular value decomposition (SVD) of the resolvent operator, obtained by linearizing the Navier--Stokes equations about a known turbulent mean velocity profile. Resolvent analysis utilizes a Fourier decomposition in time, which has thus-far limited its applicati…
▽ More
Resolvent analysis provides a framework to predict coherent spatio-temporal structures of largest linear energy amplification, through a singular value decomposition (SVD) of the resolvent operator, obtained by linearizing the Navier--Stokes equations about a known turbulent mean velocity profile. Resolvent analysis utilizes a Fourier decomposition in time, which has thus-far limited its application to statistically-stationary or time-periodic flows. This work develops a variant of resolvent analysis applicable to time-evolving flows, and proposes a variant that identifies spatio-temporally sparse structures, applicable to either stationary or time-varying mean velocity profiles. Spatio-temporal resolvent analysis is formulated through the incorporation of the temporal dimension to the numerical domain via a discrete time-differentiation operator. Sparsity (which manifests in localisation) is achieved through the addition of an L1-norm penalisation term to the optimisation associated with the SVD. This modified optimization problem can be formulated as a nonlinear eigenproblem, and solved via an inverse power method. We first demonstrate the implementation of the sparse analysis on statistically-stationary turbulent channel flow, and demonstrate that the sparse variant can identify aspects of the physics not directly evident from standard resolvent analysis. This is followed by applying the sparse space-time formulation on systems that are time-varying: a time-periodic turbulent Stokes boundary layer, and then a turbulent channel flow with a sudden change in pressure gradient. We present results demonstrating how the sparsity-promoting variant can either change the quantitative structure of the leading space-time modes to increase their sparsity, or identify entirely different linear amplification mechanisms compared to non-sparse resolvent analysis.
△ Less
Submitted 9 April, 2024;
originally announced April 2024.
-
Theoretical investigation of the vertical dielectric screening dependence on defects for few-layered van der Waals materials
Authors:
Amit Singh,
Seunghan Lee,
Hyeonhu Bae,
Jahyun Koo,
Li Yang,
Hoonkyung Lee
Abstract:
First-principle calculations were employed to analyze the effects induced by vacancies of molybdenum (Mo) and sulfur (S) on the dielectric properties of few-layered MoS2. We explored the combined effects of vacancies and dipole interactions on the dielectric properties of few-layered MoS2. In the presence of dielectric screening, we investigated uniformly distributed Mo and S vacancies, and then c…
▽ More
First-principle calculations were employed to analyze the effects induced by vacancies of molybdenum (Mo) and sulfur (S) on the dielectric properties of few-layered MoS2. We explored the combined effects of vacancies and dipole interactions on the dielectric properties of few-layered MoS2. In the presence of dielectric screening, we investigated uniformly distributed Mo and S vacancies, and then considered the case of concentrated vacancies. Our results show that the dielectric screening remarkably depends on the distribution of vacancies owing to the polarization induced by the vacancies and on the interlayer distances. This conclusion was validated for a wide range of wide-gap semiconductors with different positions and distributions of vacancies, providing an effective and reliable method for calculating and predicting electrostatic screening of dimensionally reduced materials. We further provided a method for engineering the dielectric constant by changing the interlayer distance, tuning the number of vacancies and the distribution of vacancies in few-layered van der Waals materials for their application in nanodevices and supercapacitors.
△ Less
Submitted 17 March, 2024;
originally announced March 2024.
-
The Neural Network First-Level Hardware Track Trigger of the Belle II Experiment
Authors:
S. Bähr,
H. Bae,
J. Becker,
M. Bertemes,
M. Campajola,
T. Ferber,
G. Inguglia,
Y. Iwasaki,
T. Jülg,
C. Kiesling,
Y. -T. Lai,
Y. Liu,
A. Knoll,
T. Koga,
A. Lenz,
F. Meggendorfer,
H. Nakazawa,
M. Neu,
J. Schieck,
E. Schmidt,
J. -G. Shiu,
S. Skambraks,
K. Unger,
J. Yin
Abstract:
We describe the principles and performance of the first-level ("L1") hardware track trigger of Belle II, based on neural networks. The networks use as input the results from the standard Belle II trigger, which provides "2D" track candidates in the plane transverse to the electron-positron beams. The networks then provide estimates for the origin of the 2D track candidates in direction of the coll…
▽ More
We describe the principles and performance of the first-level ("L1") hardware track trigger of Belle II, based on neural networks. The networks use as input the results from the standard Belle II trigger, which provides "2D" track candidates in the plane transverse to the electron-positron beams. The networks then provide estimates for the origin of the 2D track candidates in direction of the colliding beams ("$z$-vertex"), as well as their polar emission angles $θ$. Given the $z$-vertices of the "neural" tracks allows identifying events coming from the collision region ($z \approx 0$), and suppressing the overwhelming background from outside by a suitable cut $d$. Requiring $|z| < d$ for at least one neural track in an event with two or more 2D candidates will set an L1 trigger. The networks also enable a minimum bias trigger, requiring a single 2D track candidate validated by a neural track with a momentum larger than 0.7 GeV in addition to the $|z|$ condition. The momentum of the neural track is derived with the help of the polar angle $θ$.
△ Less
Submitted 12 June, 2024; v1 submitted 22 February, 2024;
originally announced February 2024.
-
Are the dynamics of wall turbulence in minimal channels and larger domain channels equivalent? A graph-theoretic approach
Authors:
Ahmed Elnahhas,
Emma Lenz,
Parviz Moin,
Adrián Lozano-Durán,
H. Jane Bae
Abstract:
This work proposes two algorithmic approaches to extract critical dynamical mechanisms in wall-bounded turbulence with minimum human bias. In both approaches, multiple types of coherent structures are spatiotemporally tracked, resulting in a complex multilayer network. Network motif analysis, i.e., extracting dominant non-random elemental patterns within these networks, is used to identify the mos…
▽ More
This work proposes two algorithmic approaches to extract critical dynamical mechanisms in wall-bounded turbulence with minimum human bias. In both approaches, multiple types of coherent structures are spatiotemporally tracked, resulting in a complex multilayer network. Network motif analysis, i.e., extracting dominant non-random elemental patterns within these networks, is used to identify the most dominant dynamical mechanisms. Both approaches, combined with network motif analysis, are used to answer whether the main dynamical mechanisms of a minimal flow unit (MFU) and a larger unconstrained channel flow, labeled a full channel (FC), at $Re_τ\approx 180$, are equivalent. The first approach tracks traditional coherent structures defined as low- and high-speed streaks, ejections, and sweeps. It is found that the roll-streak pairing, consistent with the current understanding of self-sustaining processes, is the most significant and simplest dynamical mechanism in both flows. However, the MFU has a timescale for this mechanism that is approximately $2.83$ times slower than that of the FC. In the second approach, we use semi-Lagrangian wavepackets and define coherent structures from their energetic streak, roll, and small-scale phase space. This method also shows similar motifs for both the MFU and FC. It indicates that, on average, the most dominant phase-space motifs are similar between the two flows, with the significant events taking place approximately $2.21$ times slower in the MFU than in the FC. This value is more consistent with the implied timescale ratio of only the slow speed streaks taking part in the roll-streak pairing extracted using the first multi-type spatiotemporal approach, which is approximately $2.17$ slower in the MFU than the FC.
△ Less
Submitted 15 January, 2024;
originally announced January 2024.
-
Linear and nonlinear Granger causality analysis of turbulent duct flows
Authors:
Barbara Lopez-Doriga,
Marco Atzori,
Ricardo Vinuesa,
H. Jane Bae,
Ankit Srivastava,
Scott T. M. Dawson
Abstract:
This research focuses on the identification and causality analysis of coherent structures that arise in turbulent flows in square and rectangular ducts. Coherent structures are first identified from direct numerical simulation data via proper orthogonal decomposition (POD), both by using all velocity components, and after separating the streamwise and secondary components of the flow. The causal r…
▽ More
This research focuses on the identification and causality analysis of coherent structures that arise in turbulent flows in square and rectangular ducts. Coherent structures are first identified from direct numerical simulation data via proper orthogonal decomposition (POD), both by using all velocity components, and after separating the streamwise and secondary components of the flow. The causal relations between the mode coefficients are analysed using pairwise-conditional Granger causality analysis. We also formulate a nonlinear Granger causality analysis that can account for nonlinear interactions between modes. Focusing on streamwise-constant structures within a duct of short streamwise extent, we show that the causal relationships are highly sensitive to whether the mode coefficients or their squared values are considered, whether nonlinear effects are explicitly accounted for, and whether streamwise and secondary flow structures are separated prior to causality analyses. We leverage these sensitivities to determine that linear mechanisms underpin causal relationships between modes that share the same symmetry or anti-symmetry properties about the corner bisector, while nonlinear effects govern the causal interactions between symmetric and antisymmetric modes. In all cases, we find that the secondary flow fluctuations (manifesting as streamwise vorticial structures) are the primary cause of both the presence and movement of near-wall streaks towards and away from the duct corners.
△ Less
Submitted 11 January, 2024;
originally announced January 2024.
-
Amplification of supersonic micro-jets by resonant inertial cavitation-bubble pair
Authors:
Yuzhe Fan,
Alexander Bußmann,
Fabian Reuter,
Hengzhu Bao,
Stefan Adami,
José M. Gordillo,
Nikolaus Adams,
Claus-Dieter Ohl
Abstract:
We reveal for the first time by experiments that within a narrow parameter regime, two cavitation bubbles with identical energy generated in anti-phase develop a supersonic jet. High-resolution numerical simulation shows a mechanism for jet amplification based on toroidal shock wave and bubble necking interaction. The micro-jet reaches velocities in excess of 1000 m/s. We demonstrate that potentia…
▽ More
We reveal for the first time by experiments that within a narrow parameter regime, two cavitation bubbles with identical energy generated in anti-phase develop a supersonic jet. High-resolution numerical simulation shows a mechanism for jet amplification based on toroidal shock wave and bubble necking interaction. The micro-jet reaches velocities in excess of 1000 m/s. We demonstrate that potential flow approximation established for Worthington jets accurately predicts the evolution of the bubble gas-liquid interfaces.
△ Less
Submitted 4 January, 2024;
originally announced January 2024.
-
Transient growth of wavelet-based resolvent modes in the buffer layer of wall-bounded turbulence
Authors:
Eric Ballouz,
Scott T. M. Dawson,
H. Jane Bae
Abstract:
In this work, we study the transient growth of the principal resolvent modes in the minimal flow unit using a reformulation of resolvent analysis in a time-localized wavelet basis. We target the most energetic spatial wavenumbers for the minimal flow unit and obtain modes that are constant in the streamwise direction and once-periodic in the spanwise direction. The forcing modes are in the shape o…
▽ More
In this work, we study the transient growth of the principal resolvent modes in the minimal flow unit using a reformulation of resolvent analysis in a time-localized wavelet basis. We target the most energetic spatial wavenumbers for the minimal flow unit and obtain modes that are constant in the streamwise direction and once-periodic in the spanwise direction. The forcing modes are in the shape of streamwise rolls, though pulse-like in time, and the response modes are in the form of transiently growing streaks. We inject the principal transient forcing mode at different intensities into a simulation of the minimal flow unit and compare the resulting nonlinear response to the linear one. The peak energy amplification scales quadratically with the intensity of the injected mode, and this peak occurs roughly at the same time for all forcing intensities. However, the larger energy amplification intensifies the magnitude of the nonlinear terms, which play an important role in dam** the energy growth and accelerating energy decay of the principal resolvent mode. We also observe that the dam** effect of the nonlinearities is less prominent close to the wall. Finally, we find that the principal resolvent forcing mode is more effective than other structures at amplifying the streak energy in the turbulent minimal-flow unit. In addition to lending support to the claim that linear mechanisms are important to near-wall turbulence, this work identifies time scales for the nonlinear breakdown of linearly-generated streaks.
△ Less
Submitted 24 December, 2023;
originally announced December 2023.
-
Electrically reconfigurable phase-change transmissive metasurface
Authors:
Cosmin Constantin Popescu,
Kiumars Aryana,
Parth Garud,
Khoi Phuong Dao,
Steven Vitale,
Vladimir Liberman,
Hyung-Bin Bae,
Tae-Woo Lee,
Myungkoo Kang,
Kathleen A. Richardson,
Carlos A. Rios Ocampo,
Yifei Zhang,
Tian Gu,
Juejun Hu,
Hyun Jung Kim
Abstract:
Programmable and reconfigurable optics hold significant potential for transforming a broad spectrum of applications, spanning space explorations to biomedical imaging, gas sensing, and optical cloaking. The ability to adjust the optical properties of components like filters, lenses, and beam steering devices could result in dramatic reductions in size, weight, and power consumption in future optoe…
▽ More
Programmable and reconfigurable optics hold significant potential for transforming a broad spectrum of applications, spanning space explorations to biomedical imaging, gas sensing, and optical cloaking. The ability to adjust the optical properties of components like filters, lenses, and beam steering devices could result in dramatic reductions in size, weight, and power consumption in future optoelectronic devices. Among the potential candidates for reconfigurable optics, chalcogenide-based phase change materials (PCMs) offer great promise due to their non-volatile and analogue switching characteristics. Although PCM have found widespread use in electronic data storage, these memory devices are deeply sub-micron-sized. To incorporate phase change materials into free-space optical components, it is essential to scale them up to beyond several hundreds of microns while maintaining reliable switching characteristics. This study demonstrated a non-mechanical, non-volatile transmissive filter based on low-loss PCMs with a 200 $μ$m$ \times $200 $μ$m switching area. The device/metafilter can be consistently switched between low- and high-transmission states using electrical pulses with a switching contrast ratio of 5.5 dB. The device was reversibly switched for 1250 cycles before accelerated degradation took place. The work represents an important step toward realizing free-space reconfigurable optics based on PCMs.
△ Less
Submitted 16 December, 2023;
originally announced December 2023.
-
Sensitivity analysis of wall-modeled large-eddy simulation for separated turbulent flow
Authors:
Di Zhou,
H. Jane Bae
Abstract:
In this study, we conduct a parametric analysis to evaluate the sensitivities of wall-modeled large-eddy simulation (LES) with respect to subgrid-scale (SGS) models, mesh resolution, wall boundary conditions and mesh anisotropy. While such investigations have been conducted for attached/flat-plate flow configurations, systematic studies specifically targeting turbulent flows with separation are no…
▽ More
In this study, we conduct a parametric analysis to evaluate the sensitivities of wall-modeled large-eddy simulation (LES) with respect to subgrid-scale (SGS) models, mesh resolution, wall boundary conditions and mesh anisotropy. While such investigations have been conducted for attached/flat-plate flow configurations, systematic studies specifically targeting turbulent flows with separation are notably sparse. To bridge this gap, our study focuses on the flow over a two-dimensional Gaussian-shaped bump at a moderately high Reynolds number, which involves smooth-body separation of a turbulent boundary layer under pressure-gradient and surface-curvature effects. In the simulations, the no-slip condition at the wall is replaced by three different forms of boundary condition based on the thin boundary layer equations and the mean wall-shear stress from high-fidelity numerical simulation to avoid the additional complexity of modeling the wall-shear stress. Various statistics, including the mean separation bubble size, mean velocity profile, and dissipation from SGS model, are compared and analyzed. The results reveal that capturing the separation bubble strongly depends on the choice of SGS model. While simulations approach grid convergence with resolutions nearing those of wall-resolved LES meshes, above this limit, the LES predictions exhibit intricate sensitivities to mesh resolution. Furthermore, both wall boundary conditions and the anisotropy of mesh cells exert discernible impacts on the turbulent flow predictions, yet the magnitudes of these impacts vary based on the specific SGS model chosen for the simulation.
△ Less
Submitted 23 March, 2024; v1 submitted 24 September, 2023;
originally announced September 2023.
-
GiftBTE: An efficient deterministic solver for non-gray phonon Boltzmann transport equation
Authors:
Yue Hu,
Ru Jia,
Jiaxuan Xu,
Yufei Sheng,
Minhua Wen,
James Lin,
Yongxing Shen,
Hua Bao
Abstract:
Advances in nanotechnology have facilitated the exploration of submicron thermal transport. At this scale, Fourier's law is no longer applicable, and the governing equation for thermal transport is the phonon Boltzmann transport equation (BTE). However, the availability of open-source solvers for the phonon BTE is limited, impeding progress in this field. This study introduces an open-source packa…
▽ More
Advances in nanotechnology have facilitated the exploration of submicron thermal transport. At this scale, Fourier's law is no longer applicable, and the governing equation for thermal transport is the phonon Boltzmann transport equation (BTE). However, the availability of open-source solvers for the phonon BTE is limited, impeding progress in this field. This study introduces an open-source package, GiftBTE, for numerically solving the non-gray phonon BTE. GiftBTE employs deterministic solutions and provides both steady-state and transient solvers. For the steady-state solver, GiftBTE employs the implicit discrete ordinates method (DOM) with second-order spatial accuracy and the synthetic iterative scheme. For the transient solver, GiftBTE employs the explicit DOM with second-order spatial accuracy. This package demonstrates excellent computational efficiency, enabling realistic three-dimensional simulations of devices and materials. By interfacing with first-principles calculations, this solver enables parameter-free computation of submicron thermal transport. The application of GiftBTE includes, but is not limited to, computing the thermal conductivity of nanostructures, predicting temperature rises in transistors, and simulating laser heating processes.
△ Less
Submitted 25 June, 2023;
originally announced June 2023.
-
Toward accurate thermal modeling of phase change material based photonic devices
Authors:
Kiumars Aryana,
Hyun Jung Kim,
Cosmin-Constantin Popescu,
Steven Vitale,
Hyung Bin Bae,
Taewoo Lee,
Tian Gu,
Juejun Hu
Abstract:
Reconfigurable or programmable photonic devices are rapidly growing and have become an integral part of many optical systems. The ability to selectively modulate electromagnetic waves through electrical stimuli is crucial in the advancement of a variety of applications from data communication and computing devices to environmental science and space explorations. Chalcogenide-based phase change mat…
▽ More
Reconfigurable or programmable photonic devices are rapidly growing and have become an integral part of many optical systems. The ability to selectively modulate electromagnetic waves through electrical stimuli is crucial in the advancement of a variety of applications from data communication and computing devices to environmental science and space explorations. Chalcogenide-based phase change materials (PCMs) are one of the most promising material candidates for reconfigurable photonics due to their large optical contrast between their different solid-state structural phases. Although significant efforts have been devoted to accurate simulation of PCM-based devices, in this paper, we highlight three important aspects which have often evaded prior models yet having significant impacts on the thermal and phase transition behavior of these devices: the enthalpy of fusion, the heat capacity change upon glass transition, as well as the thermal conductivity of liquid-phase PCMs. We further investigated the important topic of switching energy scaling in PCM devices, which also helps explain why the three above-mentioned effects have long been overlooked in electronic PCM memories but only become important in photonics. Our findings offer insight to facilitate accurate modeling of PCM-based photonic devices and can inform the development of more efficient reconfigurable optics.
△ Less
Submitted 23 May, 2023;
originally announced May 2023.
-
Wall Modeling of Turbulent Flows with Various Pressure Gradients Using Multi-Agent Reinforcement Learning
Authors:
Di Zhou,
H. Jane Bae
Abstract:
We propose a framework for develo** wall models for large-eddy simulation that is able to capture pressure-gradient effects using multi-agent reinforcement learning. Within this framework, the distributed reinforcement learning agents receive off-wall environmental states including pressure gradient and turbulence strain rate, ensuring adaptability to a wide range of flows characterized by press…
▽ More
We propose a framework for develo** wall models for large-eddy simulation that is able to capture pressure-gradient effects using multi-agent reinforcement learning. Within this framework, the distributed reinforcement learning agents receive off-wall environmental states including pressure gradient and turbulence strain rate, ensuring adaptability to a wide range of flows characterized by pressure-gradient effects and separations. Based on these states, the agents determine an action to adjust the wall eddy viscosity, and consequently the wall-shear stress. The model training is in-situ with wall-modeled large-eddy simulation grid resolutions and does not rely on the instantaneous velocity fields from high-fidelity simulations. Throughout the training, the agents compute rewards from the relative error in the estimated wall-shear stress, which allows the agents to refine an optimal control policy that minimizes prediction errors. Employing this framework, wall models are trained for two distinct subgrid-scale models using low-Reynolds-number flow over periodic hills. These models are validated through simulations of flows over periodic hills at higher Reynolds numbers and flow over the Boeing Gaussian bump. The developed wall models successfully capture the acceleration and deceleration of wall-bounded turbulent flows under pressure gradients and outperform the equilibrium wall model in predicting skin friction.
△ Less
Submitted 1 November, 2023; v1 submitted 4 May, 2023;
originally announced May 2023.
-
DeePMD-kit v2: A software package for Deep Potential models
Authors:
**zhe Zeng,
Duo Zhang,
Denghui Lu,
**hui Mo,
Zeyu Li,
Yixiao Chen,
Marián Rynik,
Li'ang Huang,
Ziyao Li,
Shaochen Shi,
Yingze Wang,
Haotian Ye,
** Tuo,
Jiabin Yang,
Ye Ding,
Yifan Li,
Davide Tisi,
Qiyu Zeng,
Han Bao,
Yu Xia,
Jiameng Huang,
Koki Muraoka,
Yibo Wang,
Junhan Chang,
Fengbo Yuan
, et al. (22 additional authors not shown)
Abstract:
DeePMD-kit is a powerful open-source software package that facilitates molecular dynamics simulations using machine learning potentials (MLP) known as Deep Potential (DP) models. This package, which was released in 2017, has been widely used in the fields of physics, chemistry, biology, and material science for studying atomistic systems. The current version of DeePMD-kit offers numerous advanced…
▽ More
DeePMD-kit is a powerful open-source software package that facilitates molecular dynamics simulations using machine learning potentials (MLP) known as Deep Potential (DP) models. This package, which was released in 2017, has been widely used in the fields of physics, chemistry, biology, and material science for studying atomistic systems. The current version of DeePMD-kit offers numerous advanced features such as DeepPot-SE, attention-based and hybrid descriptors, the ability to fit tensile properties, type embedding, model deviation, Deep Potential - Range Correction (DPRc), Deep Potential Long Range (DPLR), GPU support for customized operators, model compression, non-von Neumann molecular dynamics (NVNMD), and improved usability, including documentation, compiled binary packages, graphical user interfaces (GUI), and application programming interfaces (API). This article presents an overview of the current major version of the DeePMD-kit package, highlighting its features and technical details. Additionally, the article benchmarks the accuracy and efficiency of different models and discusses ongoing developments.
△ Less
Submitted 18 April, 2023;
originally announced April 2023.
-
Electrical transport properties driven by unique bonding configuration in gamma-GeSe
Authors:
Jeongsu Jang,
Joonho Kim,
Dongchul Sung,
Jong Hyuk Kim,
Joong-Eon Jung,
Sol Lee,
**sub Park,
Chaewoon Lee,
Heesun Bae,
Seongil Im,
Kibog Park,
Young Jai Choi,
Suklyun Hong,
Kwanpyo Kim
Abstract:
Group-IV monochalcogenides have recently shown great potential for their thermoelectric, ferroelectric, and other intriguing properties. The electrical properties of group-IV monochalcogenides exhibit a strong dependence on the chalcogen type. For example, GeTe exhibits high do** concentration, whereas S/Se-based chalcogenides are semiconductors with sizable bandgaps. Here, we investigate the el…
▽ More
Group-IV monochalcogenides have recently shown great potential for their thermoelectric, ferroelectric, and other intriguing properties. The electrical properties of group-IV monochalcogenides exhibit a strong dependence on the chalcogen type. For example, GeTe exhibits high do** concentration, whereas S/Se-based chalcogenides are semiconductors with sizable bandgaps. Here, we investigate the electrical and thermoelectric properties of gamma-GeSe, a recently identified polymorph of GeSe. gamma-GeSe exhibits high electrical conductivity (~106 S/m) and a relatively low Seebeck coefficient (9.4 uV/K at room temperature) owing to its high p-do** level (5x1021 cm-3), which is in stark contrast to other known GeSe polymorphs. Elemental analysis and first-principles calculations confirm that the abundant formation of Ge vacancies leads to the high p-do** concentration. The magnetoresistance measurements also reveal weak-antilocalization because of spin-orbit coupling in the crystal. Our results demonstrate that gamma-GeSe is a unique polymorph in which the modified local bonding configuration leads to substantially different physical properties.
△ Less
Submitted 14 April, 2023;
originally announced April 2023.
-
Log-law recovery through reinforcement-learning wall model for large-eddy simulation
Authors:
Aurélien Vadrot,
Xiang I. A. Yang,
H. Jane Bae,
Mahdi Abkar
Abstract:
This paper focuses on the use of reinforcement learning (RL) as a machine-learning (ML) modeling tool for near-wall turbulence. RL has demonstrated its effectiveness in solving high-dimensional problems, especially in domains such as games. Despite its potential, RL is still not widely used for turbulence modeling and is primarily used for flow control and optimization purposes. A new RL wall mode…
▽ More
This paper focuses on the use of reinforcement learning (RL) as a machine-learning (ML) modeling tool for near-wall turbulence. RL has demonstrated its effectiveness in solving high-dimensional problems, especially in domains such as games. Despite its potential, RL is still not widely used for turbulence modeling and is primarily used for flow control and optimization purposes. A new RL wall model (WM) called VYBA23 is developed in this work, which uses agents dispersed in the flow near the wall. The model is trained on a single Reynolds number ($Re_τ= 10^4$) and does not rely on high-fidelity data, as the back-propagation process is based on a reward rather than output error. The states of the RLWM, which are the representation of the environment by the agents, are normalized to remove dependence on the Reynolds number. The model is tested and compared to another RLWM (BK22) and to an equilibrium wall model, in a half-channel flow at eleven different Reynolds numbers ($Re_τ\in [180;10^{10}]$). The effects of varying agents' parameters such as actions range, time-step, and spacing are also studied. The results are promising, showing little effect on the average flow field but some effect on wall-shear stress fluctuations and velocity fluctuations. This work offers positive prospects for develo** RLWMs that can recover physical laws, and for extending this type of ML models to more complex flows in the future.
△ Less
Submitted 2 May, 2023; v1 submitted 28 February, 2023;
originally announced February 2023.
-
Molybdenum Carbide MXenes as Efficient Nanosensors Towards Selected Chemical Warfare Agents
Authors:
Puspamitra Panigrahi,
Yash Pal,
Thanayut Kaewmaraya,
Hyeonhu Bae,
Noushin Nasiri,
Tanveer Hussain
Abstract:
There has been budding demand for the fast, reliable, inexpensive, non-invasive, sensitive, and compact sensors with low power consumption in various fields, such as defence, chemical sensing, health care, and safe environment monitoring units. Particularly, an efficient detection of chemical warfare agents (CWAs) is of great importance for the safety and security of the humans. Inspired by this,…
▽ More
There has been budding demand for the fast, reliable, inexpensive, non-invasive, sensitive, and compact sensors with low power consumption in various fields, such as defence, chemical sensing, health care, and safe environment monitoring units. Particularly, an efficient detection of chemical warfare agents (CWAs) is of great importance for the safety and security of the humans. Inspired by this, we explored molybdenum carbide MXenes (Mo2CTx; Tx= O, F, S) as efficient sensors towards selected CWAs, such as arsine (AsH3), mustard gas (C4H8Cl2S), cyanogen chloride (NCCl), and phosgene (COCl2) both in aqueous and non-aqueous mediums. Our van der Waals corrected density functional theory (DFT) calculations reveal that the CWAs bind with Mo2CF2, and Mo2CS2 monolayers under strong chemisorption with binding energies in the range of -2.33 to -4.05 eV, whereas Mo2CO2 results in comparatively weak bindings of -0.29 to -0.58 eV. We further report the variations in the electronic properties, electrostatic potentials and work functions of Mo2CTx upon the adsorption of CWAs, which authenticate an efficient sensing mechanism. Statistical thermodynamic analysis is applied to explore the sensing properties of Mo2CTx at various of temperatures and pressures. We believe that our findings will pave the way to an innovative class of low-cost reusable sensors for the sensitive and selective detection of highly toxic CWAs in air as well as in aqueous media.
△ Less
Submitted 6 February, 2023;
originally announced February 2023.
-
Towards real-time reconstruction of velocity fluctuations in turbulent channel flow
Authors:
Rahul Arun,
H. Jane Bae,
Beverley J. McKeon
Abstract:
We develop a framework for efficient streaming reconstructions of turbulent velocity fluctuations from limited sensor measurements with the goal of enabling real-time applications. The reconstruction process is simplified by computing linear estimators using flow statistics from an initial training period and evaluating their performance during a subsequent testing period with data obtained from d…
▽ More
We develop a framework for efficient streaming reconstructions of turbulent velocity fluctuations from limited sensor measurements with the goal of enabling real-time applications. The reconstruction process is simplified by computing linear estimators using flow statistics from an initial training period and evaluating their performance during a subsequent testing period with data obtained from direct numerical simulation. We address cases where (i) no, (ii) limited, and (iii) full-field training data are available using estimators based on (i) resolvent modes, (ii) resolvent-based estimation, and (iii) spectral proper orthogonal decomposition modes. During training, we introduce blockwise inversion to accurately and efficiently compute the resolvent operator in an interpretable manner. During testing, we enable efficient streaming reconstructions by using a temporal sliding discrete Fourier transform to recursively update Fourier coefficients using incoming measurements. We use this framework to reconstruct with minimal time delay the turbulent velocity fluctuations in a minimal channel at ${\rm Re}_τ\approx 186$ from sparse planar measurements. We evaluate reconstruction accuracy in the context of the extent of data required and thereby identify potential use cases for each estimator. The reconstructions capture large portions of the dynamics from relatively few measurement planes when the linear estimators are computed with sufficient fidelity. We also evaluate the efficiency of our reconstructions and show that the present framework has the potential to help enable real-time reconstructions of turbulent velocity fluctuations in an analogous experimental setting.
△ Less
Submitted 27 June, 2023; v1 submitted 17 January, 2023;
originally announced January 2023.
-
A sparsity-promoting resolvent analysis for the identification of spatiotemporally-localized amplification mechanisms
Authors:
Barbara Lopez-Doriga,
Eric Ballouz,
H. Jane Bae,
Scott T. M. Dawson
Abstract:
This work introduces a variant of resolvent analysis that identifies forcing and response modes that are sparse in both space and time. This is achieved through the use of a sparse principal component analysis (PCA) algorithm, which formulates the associated optimization problem as a nonlinear eigenproblem that can be solved with an inverse power method. We apply this method to parallel shear flow…
▽ More
This work introduces a variant of resolvent analysis that identifies forcing and response modes that are sparse in both space and time. This is achieved through the use of a sparse principal component analysis (PCA) algorithm, which formulates the associated optimization problem as a nonlinear eigenproblem that can be solved with an inverse power method. We apply this method to parallel shear flows, both in the case where we assume Fourier modes in time (as in standard resolvent analysis) and obtain spatial localization, and where we allow for temporally-sparse modes through the use of a linearized Navier-Stokes operator discretized in both space and time. Appropriate choice of desired mode sparsity allows for the identification of structures corresponding to high amplification that are localized in both space and time. We report on the similarities and differences between these structures and those from standard methods of analysis. After validating this space-time resolvent analysis on statistically-stationary channel flow, we next implement the methodology on a time-periodic Stokes boundary layer, demonstrating the applicability of the approach to non-statistically-stationary systems.
△ Less
Submitted 5 December, 2022;
originally announced December 2022.
-
Wavelet-based resolvent analysis for statistically-stationary and temporally-evolving flows
Authors:
Eric Ballouz,
Barbara Lopez-Doriga,
Scott T. M. Dawson,
H. Jane Bae
Abstract:
This work introduces a formulation of resolvent analysis that uses wavelet transforms rather than Fourier transforms in time. This allows resolvent analysis to be extended to turbulent flows with non-stationary means in addition to statistically-stationary flows. The optimal resolvent modes for this formulation correspond to the potentially time-transient structures that are most amplified by the…
▽ More
This work introduces a formulation of resolvent analysis that uses wavelet transforms rather than Fourier transforms in time. This allows resolvent analysis to be extended to turbulent flows with non-stationary means in addition to statistically-stationary flows. The optimal resolvent modes for this formulation correspond to the potentially time-transient structures that are most amplified by the linearized Navier-Stokes operator. We validate this methodology for turbulent channel flow and show that the wavelet-based and Fourier-based resolvent analyses are equivalent for statistically-stationary flows. We then apply the wavelet-based resolvent analysis to study the transient growth mechanism in the buffer layer of a turbulent channel flow by windowing the resolvent operator in time and frequency. The method is also applied to temporally-evolving parallel shear flows such as an oscillating boundary layer and three-dimensional channel flow, in which a lateral pressure gradient perturbs a fully-developed turbulent flow in a channel.
△ Less
Submitted 5 December, 2022;
originally announced December 2022.
-
Multi-agent reinforcement learning for wall modeling in LES of flow over periodic hills
Authors:
Di Zhou,
Michael P. Whitmore,
Kevin P. Griffin,
H. Jane Bae
Abstract:
We develop a wall model for large-eddy simulation (LES) that takes into account various pressure-gradient effects using multi-agent reinforcement learning (MARL). The model is trained using low-Reynolds-number flow over periodic hills with agents distributed on the wall along the computational grid points. The model utilizes a wall eddy-viscosity formulation as the boundary condition, which is sho…
▽ More
We develop a wall model for large-eddy simulation (LES) that takes into account various pressure-gradient effects using multi-agent reinforcement learning (MARL). The model is trained using low-Reynolds-number flow over periodic hills with agents distributed on the wall along the computational grid points. The model utilizes a wall eddy-viscosity formulation as the boundary condition, which is shown to provide better predictions of the mean velocity field, rather than the typical wall-shear stress formulation. Each agent receives states based on local instantaneous flow quantities at an off-wall location, computes a reward based on the estimated wall-shear stress, and provides an action to update the wall eddy viscosity at each time step. The trained wall model is validated in wall-modeled LES (WMLES) of flow over periodic hills at higher Reynolds numbers, and the results show the effectiveness of the model on flow with pressure gradients. The analysis of the trained model indicates that the model is capable of distinguishing between the various pressure gradient regimes present in the flow.
△ Less
Submitted 29 November, 2022;
originally announced November 2022.
-
Investigating nonlinearity in wall turbulence: regenerative versus parametric mechanisms
Authors:
B. F. Farrell,
E. Kim,
H. J. Bae,
M. -A. Nikolaidis,
P. J. Ioannou
Abstract:
Both linear growth processes associated with non-normality of the mean flow and nonlinear interaction transferring energy among fluctuations contribute to maintaining turbulence. However, a detailed understanding of the mechanism by which they cooperate in sustaining the turbulent state is lacking. In this report, we examine the role of fluctuation-fluctuation nonlinearity by varying the magnitude…
▽ More
Both linear growth processes associated with non-normality of the mean flow and nonlinear interaction transferring energy among fluctuations contribute to maintaining turbulence. However, a detailed understanding of the mechanism by which they cooperate in sustaining the turbulent state is lacking. In this report, we examine the role of fluctuation-fluctuation nonlinearity by varying the magnitude of the associated term in the dynamics of Couette flow turbulence to determine how this nonlinear component helps maintain and determine the structure of the turbulent state, and particularly whether this mechanism is parametric or regenerative. Having determined that the mechanism supporting the fluctuation field in Navier-Stokes turbulence is parametric, we then study the mechanism by which the fluctuation component of turbulence is maintained by parametric growth in a time-dependent mean flow by examining the parametric growth mechanism in the frequency domain using analysis of the time-dependent resolvent.
△ Less
Submitted 26 November, 2022;
originally announced November 2022.
-
Machine learning building-block-flow wall model for large-eddy simulation
Authors:
Adrián Lozano-Durán,
H. Jane Bae
Abstract:
A wall model for large-eddy simulation (LES) is proposed by devising the flow as a combination of building blocks. The core assumption of the model is that a finite set of simple canonical flows contains the essential physics to predict the wall-shear stress in more complex scenarios. The model is constructed to predict zero/favourable/adverse mean pressure gradient wall turbulence, separation, st…
▽ More
A wall model for large-eddy simulation (LES) is proposed by devising the flow as a combination of building blocks. The core assumption of the model is that a finite set of simple canonical flows contains the essential physics to predict the wall-shear stress in more complex scenarios. The model is constructed to predict zero/favourable/adverse mean pressure gradient wall turbulence, separation, statistically unsteady turbulence with mean flow three-dimensionality, and laminar flow. The approach is implemented using two types of artificial neural networks: a classifier, which identifies the contribution of each building block in the flow, and a predictor, which estimates the wall-shear stress via combination of the building-block flows. The training data are directly obtained from wall-modelled LES (WMLES) optimised to reproduce the correct mean quantities. This approach guarantees the consistency of the training data with the numerical discretisation and the gridding strategy of the flow solver. The output of the model is accompanied by a confidence score in the prediction that aids the detection of regions where the model underperforms. The model is validated in canonical flows (e.g. laminar/turbulent boundary layers, turbulent channels, turbulent Poiseuille-Couette flow, turbulent pipe) and two realistic aircraft configurations: the NASA Common Research Model High-lift and NASA Juncture Flow experiment. It is shown that the building-block-flow wall model outperforms (or matches) the predictions by an equilibrium wall model. It is also concluded that further improvements in WMLES should incorporate advances in subgrid-scale modelling to minimise error propagation to the wall model.
△ Less
Submitted 30 April, 2023; v1 submitted 14 November, 2022;
originally announced November 2022.
-
Numerical and modeling error assessment of large-eddy simulation using direct-numerical-simulation-aided large-eddy simulation
Authors:
H. Jane Bae,
Adrian Lozano-Duran
Abstract:
We study the numerical errors of large-eddy simulation (LES) in isotropic and wall-bounded turbulence. A direct-numerical-simulation (DNS)-aided LES formulation, where the subgrid-scale (SGS) term of the LES is computed by using filtered DNS data is introduced. We first verify that this formulation has zero error in the absence of commutation error between the filter and the differentiation operat…
▽ More
We study the numerical errors of large-eddy simulation (LES) in isotropic and wall-bounded turbulence. A direct-numerical-simulation (DNS)-aided LES formulation, where the subgrid-scale (SGS) term of the LES is computed by using filtered DNS data is introduced. We first verify that this formulation has zero error in the absence of commutation error between the filter and the differentiation operator of the numerical algorithm. This method allows the evaluation of the time evolution of numerical errors for various numerical schemes at grid resolutions relevant to LES. The analysis shows that the numerical errors are of the same order of magnitude as the modeling errors and often cancel each other. This supports the idea that supervised machine learning algorithms trained on filtered DNS data might not be suitable for robust SGS model development, as this approach disregards the existence of numerical errors in the system that accumulates over time. The assessment of errors in turbulent channel flow also identifies that numerical errors close to the wall dominate, which has implications for the development of wall models.
△ Less
Submitted 3 August, 2022;
originally announced August 2022.
-
A local dynamic gradient Smagorinsky model for large-eddy simulation
Authors:
Wybe Rozema,
H. Jane Bae,
Roel W. C. P. Verstappen
Abstract:
This paper proposes a local dynamic model for large-eddy simulation (LES) without averaging in homogeneous directions. It is demonstrated that the widely-used dynamic Smagorinsky model (DSM) has a singular dynamic model constant if it is used without averaging. The singularity can cause exceedingly large local values of the dynamic model constant. If these large values are not mitigated by applica…
▽ More
This paper proposes a local dynamic model for large-eddy simulation (LES) without averaging in homogeneous directions. It is demonstrated that the widely-used dynamic Smagorinsky model (DSM) has a singular dynamic model constant if it is used without averaging. The singularity can cause exceedingly large local values of the dynamic model constant. If these large values are not mitigated by application of averaging, they can amplify discretization errors and impair the stability of simulations. To improve the local applicability of the DSM, the singularity is removed by replacing the resolved rate-of-strain tensors in the Smagorinsky model with the resolved velocity gradient tensor. These replacements result in the new dynamic gradient Smagorinsky model (DGSM). Results of simulations of three canonical turbulent flows (decaying homogeneous isotropic turbulence, a temporal mixing layer, and turbulent channel flow) are presented to demonstrate the potential of this model. The DGSM provides improved stability compared to the local DSM, and does not require averaging for stability at time step sizes that are typically used for a static locally consistent LES model. Results obtained with the DGSM are generally as accurate as results obtained with the DSM, while the DGSM has lower computational complexity. Moreover, the DGSM is easy to implement and does not require any homogeneous direction in space or time. It is thus anticipated that the model has a high potential for the simulation of complex flows.
△ Less
Submitted 7 July, 2022; v1 submitted 11 October, 2021;
originally announced October 2021.
-
Optimized phonon band discretization scheme for efficiently solving the non-gray Boltzmann transport equation
Authors:
Yue Hu,
Yongxing Shen,
Hua Bao
Abstract:
Phonon Boltzmann transport equation (BTE) is an important tool for studying the nanoscale thermal transport. Because phonons have a large spread in their properties, the non-gray (i.e. considering different phonon bands) phonon BTE is needed to accurately capture the nanoscale transport phenomena. However, BTE solvers generally require large computational cost. Non-gray modeling imposes significan…
▽ More
Phonon Boltzmann transport equation (BTE) is an important tool for studying the nanoscale thermal transport. Because phonons have a large spread in their properties, the non-gray (i.e. considering different phonon bands) phonon BTE is needed to accurately capture the nanoscale transport phenomena. However, BTE solvers generally require large computational cost. Non-gray modeling imposes significant additional complexity to the numerical simulations, which hinders the modeling of real nanoscale systems. In this work, we address this issue by a systematic investigation on the phonon band discretization scheme using real material properties of four representative materials, including silicon, gallium arsenide, diamond, and lead telluride. We find that the schemes used in previous studies require at least a few tens of bands to ensure the accuracy, which requires large computational costs. We then propose an improved band discretization scheme, in which we divide the mean free path domain into two subdomains, one on either side of the inflection point of the mean free path accumulated thermal conductivity and adopt the Gauss-Legendre quadrature for each subdomain. With this scheme, the solution of phonon BTE converges (error < 1%) with less than 10 phonon bands for all these materials. The proposed scheme allows to significantly reduce the time and memory consumption of the numerical BTE solver, which is an important step towards large-scale phonon BTE simulation for real materials.
△ Less
Submitted 28 September, 2021;
originally announced September 2021.
-
Alpha backgrounds in the AMoRE-Pilot experiment
Authors:
V. Alenkov,
H. W. Bae,
J. Beyer,
R. S. Boiko,
K. Boonin,
O. Buzanov,
N. Chanthima,
M. K. Cheoun,
S. H. Choi,
F. A. Danevich,
M. Djamal,
D. Drung,
C. Enss,
A. Fleischmann,
A. Gangapshev,
L. Gastaldo,
Yu. M. Gavriljuk,
A. Gezhaev,
V. D. Grigoryeva,
V. Gurentsov,
D. H. Ha,
C. Ha,
E. J. Ha,
I. Hahn,
E. J. Jeon
, et al. (81 additional authors not shown)
Abstract:
The Advanced Mo-based Rare process Experiment (AMoRE)-Pilot experiment is an initial phase of the AMoRE search for neutrinoless double beta decay of $^{100}$Mo, with the purpose of investigating the level and sources of backgrounds. Searches for neutrinoless double beta decay generally require ultimately low backgrounds. Surface $α$ decays on the crystals themselves or nearby materials can deposit…
▽ More
The Advanced Mo-based Rare process Experiment (AMoRE)-Pilot experiment is an initial phase of the AMoRE search for neutrinoless double beta decay of $^{100}$Mo, with the purpose of investigating the level and sources of backgrounds. Searches for neutrinoless double beta decay generally require ultimately low backgrounds. Surface $α$ decays on the crystals themselves or nearby materials can deposit a continuum of energies that can be as high as the $Q$-value of the decay itself and may fall in the region of interest (ROI). To understand these background events, we studied backgrounds from radioactive contaminations internal to and on the surface of the crystals or nearby materials with Geant4-based Monte Carlo simulations. In this study, we report on the measured $α$ energy spectra fitted with the corresponding simulated spectra for six crystal detectors, where sources of background contributions could be identified through high energy $α$ peaks and continuum parts in the energy spectrum for both internal and surface contaminations. We determine the low-energy contributions from internal and surface $α$ contaminations by extrapolating from the $α$ background fitting model.
△ Less
Submitted 5 December, 2022; v1 submitted 16 July, 2021;
originally announced July 2021.
-
Scientific multi-agent reinforcement learning for wall-models of turbulent flows
Authors:
H. Jane Bae,
Petros Koumoutsakos
Abstract:
The predictive capabilities of turbulent flow simulations, critical for aerodynamic design and weather prediction, hinge on the choice of turbulence models. The abundance of data from experiments and simulations and the advent of machine learning have provided a boost to turbulence modeling efforts. However, simulations of turbulent flows remain hindered by the inability of heuristics and supervis…
▽ More
The predictive capabilities of turbulent flow simulations, critical for aerodynamic design and weather prediction, hinge on the choice of turbulence models. The abundance of data from experiments and simulations and the advent of machine learning have provided a boost to turbulence modeling efforts. However, simulations of turbulent flows remain hindered by the inability of heuristics and supervised learning to model the near-wall dynamics. We address this challenge by introducing scientific multi-agent reinforcement learning (SciMARL) for the discovery of wall models for large-eddy simulations (LES). In SciMARL, discretization points act also as cooperating agents that learn to supply the LES closure model. The agents self-learn using limited data and generalize to extreme Reynolds numbers and previously unseen geometries. The present simulations reduce by several orders of magnitude the computational cost over fully-resolved simulations while reproducing key flow quantities. We believe that SciMARL creates unprecedented capabilities for the simulation of turbulent flows.
△ Less
Submitted 1 February, 2022; v1 submitted 21 June, 2021;
originally announced June 2021.
-
First Demonstration of Robust Tri-Gate \b{eta}-Ga2O3 Nano-membrane Field-Effect Transistors Operated Up to 400 °C
Authors:
Hagyoul Bae,
Tae Joon Park,
**hyun Noh,
Wonil Chung,
Mengwei Si,
Shriram Ramanathan,
Peide D. Ye
Abstract:
Nano-membrane tri-gate beta-gallium oxide (\b{eta}-Ga2O3) field-effect transistors (FETs) on SiO2/Si substrate fabricated via exfoliation have been demonstrated for the first time. By employing electron beam lithography, the minimum-sized features can be defined with a 50 nm fin structure. For high-quality interface between \b{eta}-Ga2O3 and gate dielectric, atomic layer-deposited 15-nm-thick alum…
▽ More
Nano-membrane tri-gate beta-gallium oxide (\b{eta}-Ga2O3) field-effect transistors (FETs) on SiO2/Si substrate fabricated via exfoliation have been demonstrated for the first time. By employing electron beam lithography, the minimum-sized features can be defined with a 50 nm fin structure. For high-quality interface between \b{eta}-Ga2O3 and gate dielectric, atomic layer-deposited 15-nm-thick aluminum oxide (Al2O3) was utilized with Tri-methyl-aluminum (TMA) self-cleaning surface treatment. The fabricated devices demonstrate extremely low subthreshold slope (SS) of 61 mV/dec, high drain current (IDS) ON/OFF ratio of 1.5 X 109, and negligible transfer characteristic hysteresis. We also experimentally demonstrated robustness of these devices with current-voltage (I-V) characteristics measured at temperatures up to 400 °C.
△ Less
Submitted 4 May, 2021;
originally announced May 2021.
-
The Energy Efficiency of Interfacial Solar Desalination: Insights from Detailed Theoretical Analysis
Authors:
Xiao Luo,
**cheng Shi,
Changying Zhao,
Zhouyang Luo,
Xiaokun Gu,
Hua Bao
Abstract:
Solar-thermal evaporation, a traditional steam generation method for solar desalination, has received numerous attentions in recent years due to the significant increase in efficiency by adopting interfacial evaporation. While most of the previous studies focus on improving the evaporation efficiency by materials innovation and system design, the underlying mechanisms of its energy efficiency are…
▽ More
Solar-thermal evaporation, a traditional steam generation method for solar desalination, has received numerous attentions in recent years due to the significant increase in efficiency by adopting interfacial evaporation. While most of the previous studies focus on improving the evaporation efficiency by materials innovation and system design, the underlying mechanisms of its energy efficiency are less explored, leading to many confusions and misunderstandings. Herein, we clarify these mechanisms with a detailed thermal analysis model. Using this model, we elucidate the advantages of interfacial evaporation over the traditional evaporation method. Furthermore, we clarify the role of tuning the solar flux and surface area on the evaporation efficiency. Moreover, we quantitatively prove that the influence of environmental conditions on evaporation efficiency could not be eliminated by subtracting the dark evaporation rate from evaporation rate under solar. We also find that interfacial evaporation in a solar still does not have the high overall solar desalination efficiency as expected, but further improvement is possible from the system design part. Our analysis gains insights to the thermal processes involved in interfacial solar evaporation and offers perspectives to the further development of interfacial solar desalination technology.
△ Less
Submitted 31 January, 2021;
originally announced March 2021.
-
Life-cycle of streaks in the buffer layer of wall-bounded turbulence
Authors:
H. Jane Bae,
Myoungkyu Lee
Abstract:
Streaks in the buffer layer of wall-bounded turbulence are tracked in time to study their life-cycle. Spatially and temporally resolved direct numerical simulation data is used to analyze the strong wall-parallel movements conditioned to low-speed streamwise flow. The analysis of the streaks shows that there is a clear distinction between wall-attached and detached streaks, and that the former can…
▽ More
Streaks in the buffer layer of wall-bounded turbulence are tracked in time to study their life-cycle. Spatially and temporally resolved direct numerical simulation data is used to analyze the strong wall-parallel movements conditioned to low-speed streamwise flow. The analysis of the streaks shows that there is a clear distinction between wall-attached and detached streaks, and that the former can be further categorized into streaks that are contained in the buffer layer and the ones that reach the outer region. The results reveal that streaks are born in the buffer layer, coalescing with each other to create larger streaks that are still attached to the wall. Once the streak becomes large enough, it starts to meander due to the large streamwise-to-wall-normal aspect ratio, and consequently the elongation in the streamwise direction, which makes it more difficult for the streak to be oriented strictly in the streamwise direction. While the continuous interaction of the streaks allows the super-structure to span extremely long temporal and length scales, individual streak components are relatively small and short-lived. Tall-attached streaks eventually split into wall-attached and wall-detached components. These wall-detached streaks have a strong wall-normal velocity away from the wall, similar to ejections or bursts observed in the literature. Conditionally averaging the flow fields to these split events show that the detached streak has not only a larger wall-normal velocity compared to the wall-attached counterpart, it also has a larger (less negative) streamwise velocity, similar to the velocity field at the tip of a vortex cluster.
△ Less
Submitted 6 May, 2021; v1 submitted 6 February, 2021;
originally announced February 2021.
-
Resolvent analysis of stratification effects on wall-bounded shear flows
Authors:
M. A. Ahmed,
H. J. Bae,
A. F. Thompson,
B. J. McKeon
Abstract:
The interaction between shear driven turbulence and stratification is a key process in a wide array of geophysical flows with spatio-temporal scales that span many orders of magnitude. A quick numerical model prediction based on external parameters of stratified boundary layers could greatly benefit the understanding of the interaction between velocity and scalar flux at varying scales. For these…
▽ More
The interaction between shear driven turbulence and stratification is a key process in a wide array of geophysical flows with spatio-temporal scales that span many orders of magnitude. A quick numerical model prediction based on external parameters of stratified boundary layers could greatly benefit the understanding of the interaction between velocity and scalar flux at varying scales. For these reasons, here, we use the resolvent framework to investigate the effects of an active scalar on incompressible wall-bounded turbulence. We obtain the state of the flow system by applying the linear resolvent operator to the nonlinear terms in the governing Navier-Stokes equations with the Boussinesq approximation. This extends the formulation to include the scalar advection equation with the scalar component acting in the wall-normal direction in the momentum equations. We use the mean velocity profiles from a DNS of a stably-stratified turbulent channel flow at varying friction Richardson number. The results obtained from the resolvent analysis are compared to the premultiplied energy spectra, auto-correlation coefficient, and the energy budget terms obtained from the DNS. It is shown that despite using only a very limited range of representative scales, the resolvent model is able to reproduce the balance of energy budget terms as well as provide meaningful insight of coherent structures occurring in the flow. Computation of the leading resolvent models, despite considering a limited range of scales, reproduces the balance of energy budget terms, provides meaningful predictions of coherent structures in the flow, and is more cost-effective than performing full-scale simulations. This quick model can provide further understanding of stratified flows with only information about the mean profile and prior knowledge of energetic scales of motion in the neutrally-buoyant boundary layers.
△ Less
Submitted 27 January, 2021;
originally announced January 2021.
-
Self-critical machine-learning wall-modeled LES for external aerodynamics
Authors:
Adrián Lozano-Durán,
Hyunji Jane Bae
Abstract:
The prediction of aircraft aerodynamic quantities of interest remains among the most pressing challenges for computational fluid dynamics. The aircraft aerodynamics are inherently turbulent with mean-flow three-dimensionality, often accompanied by laminar-to-turbulent transition, flow separation, secondary flow motions at corners, and shock wave formation, to name a few. However, the most widespre…
▽ More
The prediction of aircraft aerodynamic quantities of interest remains among the most pressing challenges for computational fluid dynamics. The aircraft aerodynamics are inherently turbulent with mean-flow three-dimensionality, often accompanied by laminar-to-turbulent transition, flow separation, secondary flow motions at corners, and shock wave formation, to name a few. However, the most widespread wall models are built upon the assumption of statistically-in-equilibrium wall-bounded turbulence and do not faithfully account for the wide variety of flow conditions described above. This raises the question of how to devise models capable of accounting for such a vast and rich collection of flow physics in a feasible manner. In this work, we propose tackling the wall-modeling challenge by devising the flow as a collection of building blocks, whose information enables the prediction of the stress as the wall. The model relies on the assumption that simple canonical flows contain the essential flow physics to devise accurate models. Three types of building block units were used to train the model: turbulent channel flows, turbulent ducts and turbulent boundary layers with separation. This limited training set will be extended in future versions of the model. The approach is implemented using two interconnected artificial neural networks: a classifier, which identifies the contribution of each building block in the flow; and a predictor, which estimates the wall stress via non-linear combinations of building-block units. The output of the model is accompanied by the confidence in the prediction. The latter value aids the detection of areas where the model underperforms, such as flow regions that are not representative of the building blocks used to train the model. The model is validated in a unseen case representative of external aerodynamic applications: the NASA Juncture Flow Experiment.
△ Less
Submitted 22 May, 2021; v1 submitted 17 December, 2020;
originally announced December 2020.
-
Evolution of Cooperative Hunting in Artificial Multi-layered Societies
Authors:
Honglin Bao,
Wolfgang Banzhaf
Abstract:
The complexity of cooperative behavior is a crucial issue in multiagent-based social simulation. In this paper, an agent-based model is proposed to study the evolution of cooperative hunting behaviors in an artificial society. In this model, the standard hunting game of stag is modified into a new situation with social hierarchy and penalty. The agent society is divided into multiple layers with s…
▽ More
The complexity of cooperative behavior is a crucial issue in multiagent-based social simulation. In this paper, an agent-based model is proposed to study the evolution of cooperative hunting behaviors in an artificial society. In this model, the standard hunting game of stag is modified into a new situation with social hierarchy and penalty. The agent society is divided into multiple layers with supervisors and subordinates. In each layer, the society is divided into multiple clusters. A supervisor controls all subordinates in a cluster locally. Subordinates interact with rivals through reinforcement learning, and report learning information to their corresponding supervisor. Supervisors process the reported information through repeated affiliation-based aggregation and by information exchange with other supervisors, then pass down the reprocessed information to subordinates as guidance. Subordinates, in turn, update learning information according to guidance, following the "win stay, lose shift" strategy. Experiments are carried out to test the evolution of cooperation in this closed-loop semi-supervised emergent system with different parameters. We also study the variations and phase transitions in this game setting.
△ Less
Submitted 15 January, 2021; v1 submitted 23 May, 2020;
originally announced May 2020.
-
Deep Learning Interfacial Momentum Closures in Coarse-Mesh CFD Two-Phase Flow Simulation Using Validation Data
Authors:
Han Bao,
**yong Feng,
Nam Dinh,
Hongbin Zhang
Abstract:
Multiphase flow phenomena have been widely observed in the industrial applications, yet it remains a challenging unsolved problem. Three-dimensional computational fluid dynamics (CFD) approaches resolve of the flow fields on finer spatial and temporal scales, which can complement dedicated experimental study. However, closures must be introduced to reflect the underlying physics in multiphase flow…
▽ More
Multiphase flow phenomena have been widely observed in the industrial applications, yet it remains a challenging unsolved problem. Three-dimensional computational fluid dynamics (CFD) approaches resolve of the flow fields on finer spatial and temporal scales, which can complement dedicated experimental study. However, closures must be introduced to reflect the underlying physics in multiphase flow. Among them, the interfacial forces, including drag, lift, turbulent-dispersion and wall-lubrication forces, play an important role in bubble distribution and migration in liquid-vapor two-phase flows. Development of those closures traditionally rely on the experimental data and analytical derivation with simplified assumptions that usually cannot deliver a universal solution across a wide range of flow conditions. In this paper, a data-driven approach, named as feature-similarity measurement (FSM), is developed and applied to improve the simulation capability of two-phase flow with coarse-mesh CFD approach. Interfacial momentum transfer in adiabatic bubbly flow serves as the focus of the present study. Both a mature and a simplified set of interfacial closures are taken as the low-fidelity data. Validation data (including relevant experimental data and validated fine-mesh CFD simulations results) are adopted as high-fidelity data. Qualitative and quantitative analysis are performed in this paper. These reveal that FSM can substantially improve the prediction of the coarse-mesh CFD model, regardless of the choice of interfacial closures, and it provides scalability and consistency across discontinuous flow regimes. It demonstrates that data-driven methods can aid the multiphase flow modeling by exploring the connections between local physical features and simulation errors.
△ Less
Submitted 7 May, 2020;
originally announced May 2020.
-
Thermal conductivity and Lorenz ratio of metals at intermediate temperature: a first-principles analysis
Authors:
Shouhang Li,
Zhen Tong,
Xinyu Zhang,
Hua Bao
Abstract:
Electronic and phononic thermal conductivity are involved in the thermal conduction for metals and Wiedemann-Franz law is usually employed to predict them separately. However, Wiedemann-Franz law is shown to be invalid at intermediate temperatures. Here, to obtain the accurate thermal conductivity and Lorenz ratio for metals, the momentum relaxation time is used for electrical conductivity and ene…
▽ More
Electronic and phononic thermal conductivity are involved in the thermal conduction for metals and Wiedemann-Franz law is usually employed to predict them separately. However, Wiedemann-Franz law is shown to be invalid at intermediate temperatures. Here, to obtain the accurate thermal conductivity and Lorenz ratio for metals, the momentum relaxation time is used for electrical conductivity and energy relaxation time for electronic thermal conductivity. The mode-level first-principles calculation is conducted on two representative metals copper and aluminum. It is shown that the method can correctly predict electrical transport coefficients from 6 to 300 K. Also, the anomalous Lorenz ratio is observed within the present scheme, which has significant departure from the Sommerfeld value. The calculation scheme can be expanded to other metallic systems and is valuable in a better understanding of the electron dynamics and transport properties of metals.
△ Less
Submitted 19 April, 2020;
originally announced April 2020.
-
Seeking for low thermal conductivity atomic configurations in $\rm{Si_{0.5}Ge_{0.5}}$ alloys with Bayesian Optimization
Authors:
Jiahao Yan,
Han Wei,
Han Xie,
Xiaokun Gu,
Hua Bao
Abstract:
The emergence of data-driven science has opened up new avenues for understanding the thermophysical properties of materials. For decades, alloys are known to possess very low thermal conductivity, but the extreme thermal conductivity can be achieved by alloying has never been identified. In this work, we combine the Bayesian optimization with a high throughput thermal conductivity calculation to s…
▽ More
The emergence of data-driven science has opened up new avenues for understanding the thermophysical properties of materials. For decades, alloys are known to possess very low thermal conductivity, but the extreme thermal conductivity can be achieved by alloying has never been identified. In this work, we combine the Bayesian optimization with a high throughput thermal conductivity calculation to search for the lowest thermal conductivity atomic configuration of $\rm{Si_{0.5}Ge_{0.5}}$ alloy. It is found layered structures are most beneficial for reducing the thermal conductivity among all atomic configurations, which is attributed to the strong branch-folding effect. Furthermore, the roles of interface roughness and layer thicknesses in producing the lowest thermal conductivity are investigated. Through another comprehensive search using Bayesian optimization, the layered structure with smooth interfaces and optimized layer thickness arrangement is identified as the optimal structure with the lowest thermal conductivity.
△ Less
Submitted 18 April, 2020;
originally announced April 2020.
-
Singularity formation for the Serre-Green-Naghdi equations and applications to abcd-Boussinesq systems
Authors:
Hantaek Bae,
Rafael Granero-Belinchón
Abstract:
In this work we prove that the solution of the Serre-Green-Naghdi equation cannot be globally defined when the interface reaches the impervious bottom tangentially. As a consequence, our result complements the paper \emph{Camassa, R., Falqui, G., Ortenzi, G., Pedroni, M., \& Thomson, C. Hydrodynamic models and confinement effects by horizontal boundaries. Journal of Nonlinear Science, 29(4), 1445-…
▽ More
In this work we prove that the solution of the Serre-Green-Naghdi equation cannot be globally defined when the interface reaches the impervious bottom tangentially. As a consequence, our result complements the paper \emph{Camassa, R., Falqui, G., Ortenzi, G., Pedroni, M., \& Thomson, C. Hydrodynamic models and confinement effects by horizontal boundaries. Journal of Nonlinear Science, 29(4), 1445-1498, 2019.} Furthermore, we also prove that the solution to the $abcd-$Boussinesq system can change sign in finite time. Finally, we provide with a proof of a scenario of finite time singularity for the $abcd-$Boussinesq system. These latter mathematical results are related to the numerics in \emph{Bona, \& Chen, Singular solutions of a Boussinesq system for water waves. J. Math. Study, 49(3), 205-220, 2016}.
△ Less
Submitted 20 April, 2021; v1 submitted 31 January, 2020;
originally announced January 2020.
-
Using Deep Learning to Explore Local Physical Similarity for Global-scale Bridging in Thermal-hydraulic Simulation
Authors:
Han Bao,
Nam Dinh,
Linyu Lin,
Robert Youngblood,
Jeffrey Lane,
Hongbin Zhang
Abstract:
Current system thermal-hydraulic codes have limited credibility in simulating real plant conditions, especially when the geometry and boundary conditions are extrapolated beyond the range of test facilities. This paper proposes a data-driven approach, Feature Similarity Measurement FFSM), to establish a technical basis to overcome these difficulties by exploring local patterns using machine learni…
▽ More
Current system thermal-hydraulic codes have limited credibility in simulating real plant conditions, especially when the geometry and boundary conditions are extrapolated beyond the range of test facilities. This paper proposes a data-driven approach, Feature Similarity Measurement FFSM), to establish a technical basis to overcome these difficulties by exploring local patterns using machine learning. The underlying local patterns in multiscale data are represented by a set of physical features that embody the information from a physical system of interest, empirical correlations, and the effect of mesh size. After performing a limited number of high-fidelity numerical simulations and a sufficient amount of fast-running coarse-mesh simulations, an error database is built, and deep learning is applied to construct and explore the relationship between the local physical features and simulation errors. Case studies based on mixed convection have been designed for demonstrating the capability of data-driven models in bridging global scale gaps.
△ Less
Submitted 6 January, 2020;
originally announced January 2020.
-
A Comprehensive Model of the Degradation of Organic Light-Emitting Diodes and Application for Efficient Stable Blue Phosphorescent Devices with Reduced Influence of Polarons
Authors:
Bomi Sim,
Jong Soo Kim,
Hye** Bae,
Sungho Nam,
Eunsuk Kwon,
Ji Whan Kim,
Hwa-Young Cho,
Sunghan Kim,
Jang-Joo Kim
Abstract:
We present a comprehensive model to analyze, quantitatively, and predict the process of degradation of organic light-emitting diodes (OLEDs) considering all possible degradation mechanisms, i.e., polaron, exciton, exciton-polaron interactions, exciton-exciton interactions, and a newly proposed impurity effect. The loss of efficiency during degradation is presented as a function of quencher density…
▽ More
We present a comprehensive model to analyze, quantitatively, and predict the process of degradation of organic light-emitting diodes (OLEDs) considering all possible degradation mechanisms, i.e., polaron, exciton, exciton-polaron interactions, exciton-exciton interactions, and a newly proposed impurity effect. The loss of efficiency during degradation is presented as a function of quencher density, the density and generation mechanisms of which were extracted using a voltage rise model. The comprehensive model was applied to stable blue phosphorescent OLEDs (PhOLEDs), and the results showed that the model described the voltage rise and external quantum efficiency (EQE) loss very well, and that the quenchers in emitting layer (EML) were mainly generated by dopant polarons. Quencher formation was confirmed from a mass spectrometry. The polaron density per dopant molecule in EML was reduced by controlling the emitter do** ratio, resulting in the highest reported LT50 of 431 hours at an initial brightness of 500 cd/m2 with CIEy<0.25 and high external quantum efficiency (EQE) >18%.
△ Less
Submitted 10 December, 2019;
originally announced December 2019.
-
Nonlinear mechanism of the self-sustaining process in the buffer and logarithmic layer of wall-bounded flows
Authors:
Hyunji Jane Bae,
Adrian Lozano-Duran,
Beverley J. McKeon
Abstract:
The nonlinear mechanism in the self-sustaining process (SSP) of wall-bounded turbulence is investigated. Resolvent analysis is used to identify the principal forcing mode which produces the maximum amplification of the velocities in numerical simulations of the minimal channel for the buffer layer and a modified logarithmic (log) layer. The wavenumbers targeted in this study are those of the funda…
▽ More
The nonlinear mechanism in the self-sustaining process (SSP) of wall-bounded turbulence is investigated. Resolvent analysis is used to identify the principal forcing mode which produces the maximum amplification of the velocities in numerical simulations of the minimal channel for the buffer layer and a modified logarithmic (log) layer. The wavenumbers targeted in this study are those of the fundamental mode that is infinitely long in the streamwise direction and once periodic in the spanwise direction. The identified mode is then projected out from the nonlinear term of the Navier-Stokes equations at each time step from the simulation of the corresponding minimal channel. The results show that the removal of the principal forcing mode of the fundamental wavenumber can inhibit turbulence in both the buffer and log layer, with the effect being greater in the buffer layer. Removing other modes instead of the principal mode of the fundamental wavenumber only marginally affects the flow. Closer inspection of the dyadic interactions in the nonlinear term shows that contributions toward the principal forcing mode come from a limited set of wavenumber interactions. Using conditional averaging, the flow structures that are responsible for generating the nonlinear interaction to self-sustain turbulence are identified as spanwise rolls interacting with oblique streaks. This method, based on the equations of motion, validates the similarities in the SSP of the buffer and log layer, and characterises the underlying quadratic interactions in the SSP of the minimal channel.
△ Less
Submitted 13 November, 2020; v1 submitted 16 November, 2019;
originally announced November 2019.
-
Computationally Efficient CFD Prediction of Bubbly Flow using Physics-Guided Deep Learning
Authors:
Han Bao,
**yong Feng,
Nam Dinh,
Hongbin Zhang
Abstract:
To realize efficient computational fluid dynamics (CFD) prediction of two-phase flow, a multi-scale framework was proposed in this paper by applying a physics-guided data-driven approach. Instrumental to this framework, Feature Similarity Measurement (FSM) technique was developed for error estimation in two-phase flow simulation using coarse-mesh CFD, to achieve a comparable accuracy as fine-mesh…
▽ More
To realize efficient computational fluid dynamics (CFD) prediction of two-phase flow, a multi-scale framework was proposed in this paper by applying a physics-guided data-driven approach. Instrumental to this framework, Feature Similarity Measurement (FSM) technique was developed for error estimation in two-phase flow simulation using coarse-mesh CFD, to achieve a comparable accuracy as fine-mesh simulations with fast-running feature. By defining physics-guided parameters and variable gradients as physical features, FSM has the capability to capture the underlying local patterns in the coarse-mesh CFD simulation. Massive low-fidelity data and respective high-fidelity data are used to explore the underlying information relevant to the main simulation errors and the effects of phenomenological scaling. By learning from previous simulation data, a surrogate model using deep feedforward neural network (DFNN) can be developed and trained to estimate the simulation error of coarse-mesh CFD. The research documented supports the feasibility of the physics-guided deep learning methods for coarse mesh CFD simulations which has a potential for the efficient industrial design.
△ Less
Submitted 17 October, 2019;
originally announced October 2019.
-
A Unified Phonon Interpretation for the Non-Fourier Heat Conduction by Non-equilibrium Molecular Dynamics Simulations
Authors:
Yue Hu,
Xiaokun Gu,
Tianli Feng,
Zheyong Fan,
Hua Bao
Abstract:
Nanoconfinement induces many intriguing non-Fourier heat conduction phenomena that have been extensively studied in recent years, such as the nonlinear temperature profile inside the devices, the temperature jumps near the contacts, and the finite-size effects. The understanding of these phenomena, however, has been a matter of debate over the past two decades. In this work, we demonstrate a unifi…
▽ More
Nanoconfinement induces many intriguing non-Fourier heat conduction phenomena that have been extensively studied in recent years, such as the nonlinear temperature profile inside the devices, the temperature jumps near the contacts, and the finite-size effects. The understanding of these phenomena, however, has been a matter of debate over the past two decades. In this work, we demonstrate a unified phonon interpretation of non-Fourier heat conduction which can help to understand these phenomena by a mode-to-mode correspondence between the non-equilibrium molecular dynamics (NEMD) simulations and the mode-resolved phonon Boltzmann transport equation (BTE). It is found that the nanoscale phonon transport characteristics including temperature profile, the heat flux value and the modal temperature depend on the applied thermal reservoirs on the two contacts. Our NEMD simulations demonstrate that Langevin thermostat behaves like an infinitely large thermal reservoir and provides thermally equilibrium mode-resolved phonon outlets, while biased reservoirs, e.g., Nose-Hoover chain thermostat and velocity rescaling method behave like non-equilibrium phonon outlets. Our interpretation clearly demonstrates that the non-Fourier heat transport phenomena are originated from a combination of non-diffusive phonon transport and phonon thermal nonequilibrium. This work provides a clear understanding of nanoscale heat transport and may guide the measurement and control of thermal transport in various applications.
△ Less
Submitted 15 October, 2019;
originally announced October 2019.
-
Resolvent-based study of compressibility effects on supersonic turbulent boundary layers
Authors:
H. Jane Bae,
Scott T. M. Dawson,
Beverley J. McKeon
Abstract:
The resolvent formulation of McKeon & Sharma (2010) is applied to supersonic turbulent boundary layers to study the validity of Morkovin's hypothesis, which postulates that high-speed turbulence structures in zero pressure-gradient turbulent boundary layers remain largely the same as its incompressible counterpart. Supersonic zero-pressure-gradient turbulent boundary layers with adiabatic wall bou…
▽ More
The resolvent formulation of McKeon & Sharma (2010) is applied to supersonic turbulent boundary layers to study the validity of Morkovin's hypothesis, which postulates that high-speed turbulence structures in zero pressure-gradient turbulent boundary layers remain largely the same as its incompressible counterpart. Supersonic zero-pressure-gradient turbulent boundary layers with adiabatic wall boundary conditions at Mach numbers ranging from 2 to 4 are considered. Resolvent analysis highlights two distinct regions of the supersonic turbulent boundary layer in the wave parameter space: the relatively supersonic region and the relatively subsonic region. In the relatively supersonic region, where the flow is supersonic relative to the freestream, resolvent modes display structures consistent with Mach wave radiation that are absent in the incompressible regime. In the relatively subsonic region, we show that the low-rank approximation of the resolvent operator is an effective approximation of the full system and that the response modes predicted by the model exhibit universal and geometrically self-similar behaviour via a transformation given by the semi-local scaling. Moreover, with the semi-local scaling, we show that the resolvent modes follow the same scaling law as their incompressible counterparts in this region, which has implications for modelling and the prediction of turbulent high-speed wall-bounded flows. We also show that the thermodynamic variables exhibit similar mode shapes to the streamwise velocity modes, supporting the strong Reynolds analogy. Finally, we demonstrate that the principal resolvent modes can be used to capture the energy distribution between momentum and thermodynamic fluctuations.
△ Less
Submitted 21 October, 2019; v1 submitted 29 May, 2019;
originally announced May 2019.
-
Influence of Boundaries and Thermostatting on Nonequilibrium Molecular Dynamics Simulations of Heat Conduction in Solids
Authors:
Zhen Li,
Shiyun Xiong,
Charles Sievers,
Yue Hu,
Zheyong Fan,
Ning Wei,
Hua Bao,
Shunda Chen,
Davide Donadio,
Tapio Ala-Nissila
Abstract:
Nonequilibrium molecular dynamics (NEMD) has been extensively used to study thermal transport at various length scales in many materials. In this method, two local thermostats at different temperatures are used to generate a nonequilibrium steady state with a constant heat flux. Conventionally, the thermal conductivity of a finite system is calculated as the ratio between the heat flux and the tem…
▽ More
Nonequilibrium molecular dynamics (NEMD) has been extensively used to study thermal transport at various length scales in many materials. In this method, two local thermostats at different temperatures are used to generate a nonequilibrium steady state with a constant heat flux. Conventionally, the thermal conductivity of a finite system is calculated as the ratio between the heat flux and the temperature gradient extracted from the linear part of the temperature profile away from the local thermostats. Here we show that, with a proper choice of the thermostat, the nonlinear part of the temperature profile should actually not be excluded in thermal transport calculations. We compare NEMD results against those from the atomistic Green's function method in the ballistic regime, and those from the homogeneous nonequilibrium molecular dynamics method in the ballistic-to-diffusive regime. These comparisons suggest that in all the transport regimes, one should directly calculate the thermal conductance from the temperature difference between the heat source and sink and, if needed, convert it to the thermal conductivity by multiplying it with the system length. Furthermore, we find that the Langevin thermostat outperforms the Nosé-Hoover (chain) thermostat in NEMD simulations because of its stochastic and local nature. We show that this is particularly important for studying asymmetric carbon-based nanostructures, for which the Nosé-Hoover thermostat can produce artifacts leading to unphysical thermal rectification. Our findings are important to obtain correct results from molecular dynamics simulations of nanoscale heat transport as the accuracy of the interatomic potentials is rapidly improving.
△ Less
Submitted 27 May, 2019;
originally announced May 2019.
-
A nonlinear subgrid-scale model for large-eddy simulations of rotating turbulent flows
Authors:
Maurits H. Silvis,
H. Jane Bae,
F. Xavier Trias,
Mahdi Abkar,
Roel Verstappen
Abstract:
Rotating turbulent flows form a challenging test case for large-eddy simulation (LES). We, therefore, propose and validate a new subgrid-scale (SGS) model for such flows. The proposed SGS model consists of a dissipative eddy viscosity term as well as a nondissipative term that is nonlinear in the rate-of-strain and rate-of-rotation tensors. The two corresponding model coefficients are a function o…
▽ More
Rotating turbulent flows form a challenging test case for large-eddy simulation (LES). We, therefore, propose and validate a new subgrid-scale (SGS) model for such flows. The proposed SGS model consists of a dissipative eddy viscosity term as well as a nondissipative term that is nonlinear in the rate-of-strain and rate-of-rotation tensors. The two corresponding model coefficients are a function of the vortex stretching magnitude. Therefore, the model is consistent with many physical and mathematical properties of the Navier-Stokes equations and turbulent stresses, and is easy to implement. We determine the two model constants using a nondynamic procedure that takes into account the interaction between the model terms. Using detailed direct numerical simulations (DNSs) and LESs of rotating decaying turbulence and spanwise-rotating plane-channel flow, we reveal that the two model terms respectively account for dissipation and backscatter of energy, and that the nonlinear term improves predictions of the Reynolds stress anisotropy near solid walls. We also show that the new SGS model provides good predictions of rotating decaying turbulence and leads to outstanding predictions of spanwise-rotating plane-channel flow over a large range of rotation rates for both fine and coarse grid resolutions. Moreover, the new nonlinear model performs as well as the dynamic Smagorinsky and scaled anisotropic minimum-dissipation models in LESs of rotating decaying turbulence and outperforms these models in LESs of spanwise-rotating plane-channel flow, without requiring (dynamic) adaptation or near-wall dam** of the model constants.
△ Less
Submitted 29 April, 2019;
originally announced April 2019.
-
Deep learning methods based on cross-section images for predicting effective thermal conductivity of composites
Authors:
Qingyuan Rong,
Han Wei,
Hua Bao
Abstract:
Effective thermal conductivity is an important property of composites for different thermal management applications. Although physics-based methods, such as effective medium theory and solving partial differential equation, dominate the relevant research, there is significant interest to establish the structure-property linkage through the machine learning method. The performance of general machin…
▽ More
Effective thermal conductivity is an important property of composites for different thermal management applications. Although physics-based methods, such as effective medium theory and solving partial differential equation, dominate the relevant research, there is significant interest to establish the structure-property linkage through the machine learning method. The performance of general machine learning methods is highly dependent on features selected to represent the microstructures. 3D convolutional neural networks (CNNs) can directly extract geometric features of composites, which have been demonstrated to establish structure-property linkages with high accuracy. However, to obtain the 3D microstructure in composite is generally challenging in reality. In this work, we attempt to use 2D cross-section images which can be easier to obtain in real applications as input of 2D CNNs to predict effective thermal conductivity of 3D composites. The results show that by using multiple cross-section images along or perpendicular to the preferred directionality of the fillers, the prediction accuracy of 2D CNNs can be as good as 3D CNNs. Such a result is demonstrated with the particle filled composite and a stochastic complex composite. The prediction accuracy is dependent on the representativeness of cross-section images used. Multiple cross-section images can fully determine the shape and distribution of fillers. The average over multiple images and the use of large-size images can reduce the uncertainty and increase the prediction accuracy. Besides, since cross-section images along the heat flow direction can distinguish between serial structures and parallel structures, they are more representative than cross-section images perpendicular to the heat flow direction.
△ Less
Submitted 12 April, 2019;
originally announced April 2019.
-
First Results from the AMoRE-Pilot neutrinoless double beta decay experiment
Authors:
V. Alenkov,
H. W. Bae,
J. Beyer,
R. S. Boiko,
K. Boonin,
O. Buzanov,
N. Chanthima,
M. K. Cheoun,
D. M. Chernyak,
J. S. Choe,
S. Choi,
F. A. Danevich,
M. Djamal,
D. Drung,
C. Enss,
A. Fleischmann,
A. M. Gangapshev,
L. Gastaldo,
Yu. M. Gavriljuk,
A. M. Gezhaev,
V. D. Grigoryeva,
V. I. Gurentsov,
O. Gylova,
C. Ha,
D. H. Ha
, et al. (84 additional authors not shown)
Abstract:
The Advanced Molybdenum-based Rare process Experiment (AMoRE) aims to search for neutrinoless double beta decay (0$νββ$) of $^{100}$Mo with $\sim$100 kg of $^{100}$Mo-enriched molybdenum embedded in cryogenic detectors with a dual heat and light readout. At the current, pilot stage of the AMoRE project we employ six calcium molybdate crystals with a total mass of 1.9 kg, produced from $^{48}$Ca-de…
▽ More
The Advanced Molybdenum-based Rare process Experiment (AMoRE) aims to search for neutrinoless double beta decay (0$νββ$) of $^{100}$Mo with $\sim$100 kg of $^{100}$Mo-enriched molybdenum embedded in cryogenic detectors with a dual heat and light readout. At the current, pilot stage of the AMoRE project we employ six calcium molybdate crystals with a total mass of 1.9 kg, produced from $^{48}$Ca-depleted calcium and $^{100}$Mo-enriched molybdenum ($^{48\textrm{depl}}$Ca$^{100}$MoO$_4$). The simultaneous detection of heat(phonon) and scintillation (photon) signals is realized with high resolution metallic magnetic calorimeter sensors that operate at milli-Kelvin temperatures. This stage of the project is carried out in the Yangyang underground laboratory at a depth of 700 m. We report first results from the AMoRE-Pilot $0νββ$ search with a 111 kg$\cdot$d live exposure of $^{48\textrm{depl}}$Ca$^{100}$MoO$_4$ crystals. No evidence for $0νββ$ decay of $^{100}$Mo is found, and a upper limit is set for the half-life of 0$νββ$ of $^{100}$Mo of $T^{0ν}_{1/2} > 9.5\times10^{22}$ y at 90% C.L.. This limit corresponds to an effective Majorana neutrino mass limit in the range $\langle m_{ββ}\rangle\le(1.2-2.1)$ eV.
△ Less
Submitted 7 May, 2019; v1 submitted 22 March, 2019;
originally announced March 2019.
-
Thermo-optical pulsing in a microresonator filtered fiber-laser: a route towards all-optical control and synchronization
Authors:
Maxwell Rowley,
Benjamin Wetzel,
Luigi Di Lauro,
Juan S. Totero Gongora,
Hualong Bao,
Jonathan Silver,
Leonardo Del Bino,
Pascal Del' Haye,
Marco Peccianti,
Alessia Pasquazi
Abstract:
We report on 'slow' pulsing dynamics in a silica resonator-based laser system: by nesting a high-Q rod-resonator inside an amplifying fiber cavity, we demonstrate that trains of microsecond pulses can be generated with repetition rates in the hundreds of kilohertz. We show that such pulses are produced with a period equivalent to several hundreds of laser cavity roundtrips via the interaction betw…
▽ More
We report on 'slow' pulsing dynamics in a silica resonator-based laser system: by nesting a high-Q rod-resonator inside an amplifying fiber cavity, we demonstrate that trains of microsecond pulses can be generated with repetition rates in the hundreds of kilohertz. We show that such pulses are produced with a period equivalent to several hundreds of laser cavity roundtrips via the interaction between the gain dynamics in the fiber cavity and the thermo-optical effects in the high-Q resonator. Experiments reveal that the pulsing properties can be controlled by adjusting the amplifying fiber cavity parameters. Our results, confirmed by numerical simulations, provide useful insights on the dynamical onset of complex self-organization phenomena in resonator-based laser systems where thermo-optical effects play an active role. In addition, we show how the thermal state of the resonator can be probed and even modified by an external, counter-propagating optical field, thus hinting towards novel approaches for all-optical control and sensing applications.
△ Less
Submitted 21 March, 2019;
originally announced March 2019.