Showing 1–10 of 10 results for author: Badarla, V R

Label-free mid-infrared photothermal microscopy revisits intracellular thermal dynamics: what do fluorescent nanothermometers measure?

Authors: Keiichiro Toda, Masaharu Takarada, Genki Ishigane, Hiroyuki Shimada, Venkata Ramaiah Badarla, Kohki Okabe, Takuro Ideguchi

Abstract: Fluorescent nanothermometry has revealed pronounced inhomogeneous temperature distributions within cells and has opened the field of single-cell thermal biology. However, this finding has sparked a controversial discussion known as the 10^5 gap issue, which arises from a simple heat conduction calculation suggesting such large temperature distributions should not exist inside cells. This debate ha… ▽ More Fluorescent nanothermometry has revealed pronounced inhomogeneous temperature distributions within cells and has opened the field of single-cell thermal biology. However, this finding has sparked a controversial discussion known as the 10^5 gap issue, which arises from a simple heat conduction calculation suggesting such large temperature distributions should not exist inside cells. This debate has led to a hypothesis that intracellular thermal conduction is considerably slower than in water. Although various efforts have been made to measure intracellular thermal conduction, there are significant variations in the reported values. Here, we address this issue using label-free mid-infrared photothermal microscopy, which enables us to measure heat-induced temperature variations under local thermal equilibrium via refractive index changes. We measured intracellular thermal diffusivity via transient thermal decay and found that thermal diffusivity within living cells is 93-94% of water in the cytoplasm and nucleus. This result suggests that intracellular thermal conduction cannot explain the 10^5 gap issue. To investigate this issue further, we compared fluorescent nanothermometry with our label-free thermometry by measuring heat-induced temperature variations in living cells. This experiment revealed intriguing results where the fluorescent nanothermometry showed a slowly varying unexpected signal in addition to a constant temperature change. This result indicates that fluorescent nanothermometers are sensitive to additional factors on top of the temperature variation under local thermal equilibrium, raising an open question of what fluorescent nanothermometry measures. △ Less

Submitted 23 June, 2024; originally announced June 2024.

Mid-infrared wide-field nanoscopy

Authors: Miu Tamamitsu, Keiichiro Toda, Venkata Ramaiah Badarla, Hiroyuki Shimada, Kuniaki Konishi, Takuro Ideguchi

Abstract: Mid-infrared (MIR) spectroscopy is widely recognized as a powerful, non-distractive method for chemical analysis. However, its utility is constrained by a micrometer-scale spatial resolution imposed by the long-wavelength MIR diffraction limit. This limitation has been recently overcome by MIR photothermal (MIP) imaging, which detects photothermal effects induced in the vicinity of MIR absorbers u… ▽ More Mid-infrared (MIR) spectroscopy is widely recognized as a powerful, non-distractive method for chemical analysis. However, its utility is constrained by a micrometer-scale spatial resolution imposed by the long-wavelength MIR diffraction limit. This limitation has been recently overcome by MIR photothermal (MIP) imaging, which detects photothermal effects induced in the vicinity of MIR absorbers using a visible-light microscope. Despite its promise, the full potential of its spatial resolving power has not been realized. Here, we present an optimal implementation of wide-field MIP imaging to achieve high spatial resolution. This is accomplished by employing single-objective synthetic-aperture quantitative phase imaging (SOSA-QPI) with synchronized sub-nanosecond MIR and visible light sources, effectively suppressing the resolution-degradation effect caused by photothermal heat diffusion. We demonstrate far-field MIR spectroscopic imaging with a spatial resolution limited by the visible diffraction, down to 125 nm, in the MIR region of 3.12-3.85 um (2,600-3,200 cm-1). This technique, through the use of a shorter visible wavelength and/or a higher objective numerical aperture, holds the potential to achieve a spatial resolution of less than 100 nm, thus paving the way for MIR wide-field nanoscopy. △ Less

Submitted 14 June, 2023; originally announced June 2023.

Upconversion time-stretch infrared spectroscopy

Authors: Kazuki Hashimoto, Takuma Nakamura, Takahiro Kageyama, Venkata Ramaiah Badarla, Hiroyuki Shimada, Ryoich Horisaki, Takuro Ideguchi

Abstract: High-speed measurement confronts the extreme speed limit when the signal becomes comparable to the noise level. In the context of broadband mid-infrared spectroscopy, state-of-the-art ultrafast Fourier-transform infrared spectrometers, in particular dual-comb spectrometers, have improved the measurement rate up to a few Mspectra/s, which is limited by the signal-to-noise ratio. Time-stretch infrar… ▽ More High-speed measurement confronts the extreme speed limit when the signal becomes comparable to the noise level. In the context of broadband mid-infrared spectroscopy, state-of-the-art ultrafast Fourier-transform infrared spectrometers, in particular dual-comb spectrometers, have improved the measurement rate up to a few Mspectra/s, which is limited by the signal-to-noise ratio. Time-stretch infrared spectroscopy, an emerging ultrafast frequency-swept mid-infrared spectroscopy technique, has shown a record-high rate of 80 Mspectra/s with an intrinsically higher signal-to-noise ratio than Fourier-transform spectroscopy by more than the square-root of the number of spectral elements. However, it can measure no more than ~30 spectral elements with a low resolution of several cm-1. Here, we significantly increase the measurable number of spectral elements to more than 1,000 by incorporating a nonlinear upconversion process. The one-to-one map** of a broadband spectrum from the mid-infrared to the near-infrared telecommunication region enables low-loss time-stretching with a single-mode optical fiber and low-noise signal detection with a high-bandwidth photoreceiver. We demonstrate high-resolution mid-infrared spectroscopy of gas-phase methane molecules with a high resolution of 0.017 cm-1. This unprecedentedly high-speed vibrational spectroscopy technique would satisfy various unmet needs in experimental molecular science, e.g., measuring ultrafast dynamics of irreversible phenomena, statistically analyzing a large amount of heterogeneous spectral data, or taking broadband hyperspectral images at a high frame rate. △ Less

Submitted 25 September, 2022; originally announced September 2022.

Mid-infrared photothermal single-live-cell imaging beyond video rate

Authors: Genki Ishigane, Keiichiro Toda, Miu Tamamitsu, Hiroyuki Shimada, Venkata Ramaiah Badarla, Takuro Ideguchi

Abstract: Advancement in mid-infrared (MIR) technology has led to promising biomedical applications of MIR spectroscopy, such as liquid biopsy or breath diagnosis. On the contrary, MIR microscopy has been rarely used for live biological samples in an aqueous environment due to the lack of spatial resolution and the large water absorption background. Recently, mid-infrared photothermal (MIP) imaging has prov… ▽ More Advancement in mid-infrared (MIR) technology has led to promising biomedical applications of MIR spectroscopy, such as liquid biopsy or breath diagnosis. On the contrary, MIR microscopy has been rarely used for live biological samples in an aqueous environment due to the lack of spatial resolution and the large water absorption background. Recently, mid-infrared photothermal (MIP) imaging has proven to be applicable to 2D and 3D single-cell imaging with high spatial resolution inherited from visible light. However, the maximum measurement rate has been limited to several frames/s, limiting its range of use. Here, we develop a significantly-improved wide-field MIP quantitative phase microscope with two orders-of-magnitude higher signal-to-noise ratio than previous MIP imaging techniques and demonstrate single-live-cell imaging beyond video rate. We first derive optimal system design by numerically simulating thermal conduction following the photothermal effect. Then, we develop the designed system with a homemade nanosecond MIR optical parametric oscillator and a high full-well-capacity image sensor. Our high-speed and high-spatial-resolution MIR microscope has great potential to become a new tool for life science, in particular for single-live-cell analysis. △ Less

Submitted 25 August, 2022; originally announced August 2022.

A simple approach of broadband mid-infrared pulse generation with a mode-locked Yb-doped fiber laser

Authors: Takuma Nakamura, Venkata Ramaiah Badarla, Kazuki Hashimoto, Peter G. Schunemann, Takuro Ideguchi

Abstract: Broadband mid-infrared (MIR) molecular spectroscopy demands a bright and broadband light source in the molecular fingerprint region. To this end, intra-pulse difference frequency generation (IDFG) has shown excellent properties among various techniques. However, previous IDFG systems have mainly used unconventional long-wavelength 2-$μ$m ultrashort pulsed lasers. A few systems have been demonstrat… ▽ More Broadband mid-infrared (MIR) molecular spectroscopy demands a bright and broadband light source in the molecular fingerprint region. To this end, intra-pulse difference frequency generation (IDFG) has shown excellent properties among various techniques. However, previous IDFG systems have mainly used unconventional long-wavelength 2-$μ$m ultrashort pulsed lasers. A few systems have been demonstrated with 1-$μ$m lasers, but they use bulky 100-W-class high-power Yb thin-disk lasers. In this work, we demonstrate a simple and robust approach of 1-$μ$m-pumped broadband IDFG with a conventional mode-locked Yb-doped fiber laser. We first generate 3.3-W, 12.1-fs ultrashort pulses at 50 MHz by a simple combination of spectral broadening with a short single-mode fiber and pulse compression with chirped mirrors. Then, we use them for pum** a thin orientation-patterned gallium phosphide (OP-GaP) crystal, generating 1.2-mW broadband MIR pulses with the -20-dB bandwidth of 480 cm$^{-1}$ in the fingerprint region (760-1240 cm$^{-1}$, 8.1-13.1 $μ$m). The 1-$μ$m-based IDFG system allows for simultaneous generation of ultrashort pulses in the ultraviolet and visible regions, enabling, for example, 100-MHz-level high-repetition-rate vibrational sum-frequency generation spectroscopy or pump-probe spectroscopy. △ Less

Submitted 15 December, 2021; originally announced December 2021.

Broadband complementary vibrational spectroscopy with cascaded intra-pulse difference frequency generation

Authors: Kazuki Hashimoto, Venkata Ramaiah Badarla, Takayuki Imamura, Takuro Ideguchi

Abstract: One of the essential goals of molecular spectroscopy is to measure all fundamental molecular vibrations simultaneously. To this end, one needs to measure broadband infrared (IR) absorption and Raman scattering spectra, which provide complementary vibrational information. A recently demonstrated technique called complementary vibrational spectroscopy (CVS) enables simultaneous measurements of IR an… ▽ More One of the essential goals of molecular spectroscopy is to measure all fundamental molecular vibrations simultaneously. To this end, one needs to measure broadband infrared (IR) absorption and Raman scattering spectra, which provide complementary vibrational information. A recently demonstrated technique called complementary vibrational spectroscopy (CVS) enables simultaneous measurements of IR and Raman spectra with a single device based on a single laser source. However, the spectral coverage was limited to ~1000 cm-1, which partially covers the spectral regions of the fundamental vibrations. In this work, we demonstrate a simple method to expand the spectral bandwidth of the CVS with a cascaded intra-pulse difference-frequency generation (IDFG). Using the system, we measure broadband CVS spectra of organic liquids spanning over 2000 cm-1, more than double the previous study. △ Less

Submitted 23 September, 2021; originally announced September 2021.

High-speed Fourier-transform infrared spectroscopy with phase-controlled delay line

Authors: Kazuki Hashimoto, Venkata Ramaiah Badarla, Takuro Ideguchi

Abstract: Fourier-transform infrared spectroscopy (FTIR) is the golden standard of mid-infrared (MIR) molecular spectroscopic analysis through optically-encoded vibrational signatures. Michelson-type FTIR and MIR dual-comb spectrometers allow us to simultaneously investigate multiple molecular species via the broadband and high-resolution spectroscopic capabilities. However, these are not applicable to high… ▽ More Fourier-transform infrared spectroscopy (FTIR) is the golden standard of mid-infrared (MIR) molecular spectroscopic analysis through optically-encoded vibrational signatures. Michelson-type FTIR and MIR dual-comb spectrometers allow us to simultaneously investigate multiple molecular species via the broadband and high-resolution spectroscopic capabilities. However, these are not applicable to high-speed measurements due to the low temporal resolution which is fundamentally limited by the signal-to-noise ratio (SNR). In this study, we develop a high-speed FTIR spectroscopy technique called phase-controlled Fourier-transform infrared spectroscopy (PC-FTIR) that has the capability to measure MIR absorption spectra at a rate of above 10 kHz. PC-FTIR demonstrates the high scan rate with a high SNR for various spectral bandwidths by arbitrarily adjusting the instrumental spectral resolution. As a proof of principle demonstration, we measure high-speed mixing dynamics of two liquids at a rate of 24 kHz. We also measure MIR spectra of gas-phase molecules with higher spectral resolution at a rate of 12 kHz. This high-speed MIR spectrometer could be especially useful for measuring non-repetitive fast phenomena and acquiring a large amount spectral data within a short time. △ Less

Submitted 30 August, 2020; originally announced August 2020.

A multimodal laser-scanning nonlinear optical microscope with a rapid broadband Fourier-transform coherent Raman modality

Authors: Faris Sinjab, Kazuki Hashimoto, Venktata Ramaiah Badarla, Junko Omachi, Takuro Ideguchi

Abstract: Nonlinear optical microscopy allows rapid high-resolution microscopy with image contrast generated from intrinsic properties of the sample. Established modalities such as multiphoton excited fluorescence and second/third-harmonic generation can be combined with other nonlinear techniques, such as coherent Raman spectroscopy which typically allow chemical imaging of a single resonant vibrational mo… ▽ More Nonlinear optical microscopy allows rapid high-resolution microscopy with image contrast generated from intrinsic properties of the sample. Established modalities such as multiphoton excited fluorescence and second/third-harmonic generation can be combined with other nonlinear techniques, such as coherent Raman spectroscopy which typically allow chemical imaging of a single resonant vibrational mode of a sample. Here, we utilize a single ultrafast laser source to obtain broadband coherent Raman spectra on a microscope, together with other nonlinear microscopy approaches on the same instrument. We demonstrate that the coherent Raman modality allows broadband measurement (>1000 cm-1), with high spectral resolution (<5 cm-1), with a rapid spectral acquisition rate (3-12 kHz). This enables Raman hyperspectral imaging of > kilo-pixel images at >11 frames per second. △ Less

Submitted 28 May, 2020; originally announced May 2020.

Time-stretch infrared spectroscopy

Authors: Akira Kawai, Kazuki Hasihmoto, Venkata Ramaiah Badarla, Takayuki Imamura, Takuro Ideguchi

Abstract: Improving spectral acquisition rate of broadband mid-infrared spectroscopy promises further advancements of molecular science and technology. Unlike the pump-probe spectroscopy that requires repeated measurements with different pump-probe delays, continuous spectroscopy running at a high spectral acquisition rate enables transient measurements of rapidly changing non-repeating phenomena or statist… ▽ More Improving spectral acquisition rate of broadband mid-infrared spectroscopy promises further advancements of molecular science and technology. Unlike the pump-probe spectroscopy that requires repeated measurements with different pump-probe delays, continuous spectroscopy running at a high spectral acquisition rate enables transient measurements of rapidly changing non-repeating phenomena or statistical analysis of a large amount of spectral data acquired within a short time. Recently, Fourier-transform infrared spectrometers (FT-IR) with rapid delay scan mechanisms including dual-comb spectrometers have significantly improved the measurement rate up to ~1 MSpectra/s that is fundamentally limited by the signal-to-noise ratio. Here, we overcome the limit and demonstrate the fastest continuous broadband vibrational spectrometer running at 80 MSpectra/s by implementing wavelength-swept time-stretch spectroscopy technique in the mid-infrared region. Our proof-of-concept experiment of the time-stretch infrared spectroscopy (TS-IR) demonstrates broadband absorption spectroscopy of phenylacetylene from 4.4 to 4.9 μm (2040-2270 cm-1) at a resolution of 15 nm (7.7 cm-1) with a superior signal-to-noise ratio of 85 without averaging and a shot-to-shot fluctuation of 1.3%. △ Less

Submitted 3 June, 2020; v1 submitted 9 December, 2019; originally announced December 2019.

Complementary Vibrational Spectroscopy

Authors: Kazuki Hashimoto, Venkata Ramaiah Badarla, Akira Kawai, Takuro Ideguchi

Abstract: Vibrational spectroscopy, comprised of infrared absorption and Raman scattering spectroscopy, is widely used for label-free optical sensing and imaging in various scientific and industrial fields. The group theory states that the two molecular spectroscopy methods are sensitive to vibrations categorized in different point groups and provide complementary vibrational spectra. Therefore, complete vi… ▽ More Vibrational spectroscopy, comprised of infrared absorption and Raman scattering spectroscopy, is widely used for label-free optical sensing and imaging in various scientific and industrial fields. The group theory states that the two molecular spectroscopy methods are sensitive to vibrations categorized in different point groups and provide complementary vibrational spectra. Therefore, complete vibrational information cannot be acquired by a single spectroscopic device, which has impeded the full potential of vibrational spectroscopy. Here, we demonstrate simultaneous infrared absorption and Raman scattering spectroscopy that allows us to measure the complete broadband vibrational spectra in the molecular fingerprint region with a single instrument based on an ultrashort pulsed laser. The system is based on dual-modal Fourier-transform spectroscopy enabled by efficient use of nonlinear optical effects. Our proof-of-concept experiment demonstrates rapid, broadband and high spectral resolution measurements of complementary spectra of organic liquids for precise and accurate molecular analysis. △ Less

Submitted 4 April, 2019; originally announced April 2019.