-
Ultrafast nanocomposite scintillators based on Cd-enhanced CsPbCl3 nanocrystals in polymer matrix
Authors:
Andrea Erroi,
Francesco Carulli,
Francesca Cova,
Isabel Frank,
Matteo L. Zaffalon,
Jordi Llusar,
Sara Mecca,
Alessia Cemmi,
Ilaria Di Sarcina,
Francesca Rossi,
Luca Beverina,
Francesco Meinardi,
Ivan Infante,
Etiennette Auffray,
Sergio Brovelli
Abstract:
Lead halide perovskite nanocrystals (LHP-NCs) embedded in polymer matrices are gaining traction for next-generation radiation detectors. While progress has been made on green-emitting CsPbBr3 NCs, scant attention has been given to the scintillation properties of CsPbCl3 NCs, which emit size-tunable UV-blue light matching the peak efficiency of ultrafast photodetectors. In this study, we explore th…
▽ More
Lead halide perovskite nanocrystals (LHP-NCs) embedded in polymer matrices are gaining traction for next-generation radiation detectors. While progress has been made on green-emitting CsPbBr3 NCs, scant attention has been given to the scintillation properties of CsPbCl3 NCs, which emit size-tunable UV-blue light matching the peak efficiency of ultrafast photodetectors. In this study, we explore the scintillation characteristics of CsPbCl3 NCs produced through a scalable method and treated with CdCl2. Spectroscopic, radiometric and theoretical analysis on both untreated and treated NCs uncover deep hole trap states due to surface undercoordinated chloride ions, eliminated by Pb to Cd substitution. This yields near-perfect efficiency and resistance to polyacrylate mass-polymerization. Radiation hardness tests demonstrate stability to high gamma doses while time-resolved experiments reveal ultrafast radioluminescence with an average lifetime as short as 210 ps. These findings enhance our comprehension of LHP NCs' scintillation properties, positioning CsPbCl3 as a promising alternative to conventional fast scintillators.
△ Less
Submitted 23 April, 2024;
originally announced April 2024.
-
Fast emitting nanocomposites for high-resolution ToF-PET imaging based on multicomponent scintillators
Authors:
Matteo Orfano,
Fiammetta Pagano,
Ilaria Mattei,
Francesca Cova,
Valeria Secchi,
Silvia Bracco,
Edith Rogers,
Luca Barbieri,
Roberto Lorenzi,
Gregory Bizarri,
Etiennette Auffray,
Angelo Monguzzi
Abstract:
Time-of-Flight Positron Emission Tomography is a medical imaging technique, based on the detection of two back-to-back γ-photons generated from radiotracers injected in the body. Its limit is the ability of employed scintillation detectors to discriminate in time the arrival of γ-pairs, i.e. the coincidence time resolution (CTR). A CTR < 50 ps that would enable fast imaging with ultralow radiotrac…
▽ More
Time-of-Flight Positron Emission Tomography is a medical imaging technique, based on the detection of two back-to-back γ-photons generated from radiotracers injected in the body. Its limit is the ability of employed scintillation detectors to discriminate in time the arrival of γ-pairs, i.e. the coincidence time resolution (CTR). A CTR < 50 ps that would enable fast imaging with ultralow radiotracer dose. Monolithic materials do not have simultaneously the required high light output and fast emission characteristics, thus the concept of scintillating heterostructure is proposed, where the device is made of a dense scintillator coupled to a fast-emitting light material. Here we present a composite polymeric scintillator, whose density has been increased upon addition of hafnium oxide nanoparticles. This enhanced by +300% its scintillation yield, surpassing commercial plastic scintillators. The nanocomposite is coupled to bismuth germanate oxide (BGO) realizing a multilayer scintillator. We observed the energy sharing between its components, which activate the nanocomposite fast emission enabling a net CTR improvement of 25% with respect to monolithic BGO. These results demonstrate that a controlled loading with dense nanomaterials is an excellent strategy to enhance the performance of polymeric scintillators for their use in advanced radiation detection and imaging technologies.
△ Less
Submitted 26 September, 2023;
originally announced September 2023.
-
Sub-10 ps time tagging of electromagnetic showers with scintillating glasses and SiPMs
Authors:
Marco T. Lucchini,
Andrea Benaglia,
Stefan Gundacker,
Jack Illare,
Paul Lecoq,
Alfred A. Margaryan,
Ashot A. Margaryan,
Kristof Pauwels,
Etiennette Auffray
Abstract:
The high energy physics community has recently identified an $e^+e^-$ Higgs factory as one of the next-generation collider experiments, following the completion of the High Luminosity LHC program at CERN.The moderate radiation levels expected at such colliders compared to hadron colliders, enable the use of less radiation tolerant but cheaper technologies for the construction of the particle detec…
▽ More
The high energy physics community has recently identified an $e^+e^-$ Higgs factory as one of the next-generation collider experiments, following the completion of the High Luminosity LHC program at CERN.The moderate radiation levels expected at such colliders compared to hadron colliders, enable the use of less radiation tolerant but cheaper technologies for the construction of the particle detectors. This opportunity has triggered a renewed interest in the development of scintillating glasses for the instrumentation of large detector volumes such as homogeneous calorimeters. While the performance of such scintillators remains typically inferior in terms of light yield and radiation tolerance compared to that of many scintillating crystals, substantial progress has been made over the recent years. In this paper we discuss the time resolution of cerium-doped Alkali Free Fluorophosphate scintillating glasses, read-out with silicon photo-multipliers in detecting single charged tracks and at different positions along the longitudinal development of an electromagnetic shower, using respectively 150~GeV pions and 100~GeV electron beams at the CERN SPS H2 beam line. A single sensor time resolution of 14.4~ps and 5-7~ps was measured respectively in the two cases. With such a performance the present technology has the potential to address an emerging requirement of future detectors at collider experiments: measuring the time-of-flight of single charged particles as well as that of neutral particles showering inside the calorimeter and the time development of showers.
△ Less
Submitted 15 March, 2023; v1 submitted 6 December, 2022;
originally announced December 2022.
-
Performance of a spaghetti calorimeter prototype with tungsten absorber and garnet crystal fibres
Authors:
Liupan An,
Etiennette Auffray,
Federico Betti,
Frederik Dall'Omo,
David Gascon,
Andrey Golutvin,
Yury Guz,
Sergey Kholodenko,
Loris Martinazzoli,
José Mazorra De Cos,
Eduardo Picatoste,
Marco Pizzichemi,
Philipp Roloff,
Matteo Salomoni,
David Sanchez,
Andreas Schopper,
Aleksandr Semennikov,
Pavel Shatalov,
Evgenii Shmanin,
Daria Strekalina,
Yanxi Zhang
Abstract:
A spaghetti calorimeter (SPACAL) prototype with scintillating crystal fibres was assembled and tested with electron beams of energy from 1 to 5 GeV. The prototype comprised radiation-hard Cerium-doped Gd$_3$Al$_2$Ga$_3$O$_{12}$ (GAGG:Ce) and Y$_3$Al$_5$O$_{12}$ (YAG:Ce) embedded in a pure tungsten absorber. The energy resolution was studied as a function of the incidence angle of the beam and foun…
▽ More
A spaghetti calorimeter (SPACAL) prototype with scintillating crystal fibres was assembled and tested with electron beams of energy from 1 to 5 GeV. The prototype comprised radiation-hard Cerium-doped Gd$_3$Al$_2$Ga$_3$O$_{12}$ (GAGG:Ce) and Y$_3$Al$_5$O$_{12}$ (YAG:Ce) embedded in a pure tungsten absorber. The energy resolution was studied as a function of the incidence angle of the beam and found to be of the order of $10\% / \sqrt{E} \oplus1\%$, in line with the LHCb Shashlik technology. The time resolution was measured with metal channel dynodes photomultipliers placed in contact with the fibres or coupled via a light guide, additionally testing an optical tape to glue the components. Time resolution of a few tens of picosecond was achieved for all the energies reaching down to (18.5 $\pm$ 0.2) ps at 5 GeV.
△ Less
Submitted 8 November, 2022; v1 submitted 5 May, 2022;
originally announced May 2022.
-
Test beam characterization of sensor prototypes for the CMS Barrel MIP Timing Detector
Authors:
R. Abbott,
A. Abreu,
F. Addesa,
M. Alhusseini,
T. Anderson,
Y. Andreev,
A. Apresyan,
R. Arcidiacono,
M. Arenton,
E. Auffray,
D. Bastos,
L. A. T. Bauerdick,
R. Bellan,
M. Bellato,
A. Benaglia,
M. Benettoni,
R. Bertoni,
M. Besancon,
S. Bharthuar,
A. Bornheim,
E. Brücken,
J. N. Butler,
C. Campagnari,
M. Campana,
R. Carlin
, et al. (174 additional authors not shown)
Abstract:
The MIP Timing Detector will provide additional timing capabilities for detection of minimum ionizing particles (MIPs) at CMS during the High Luminosity LHC era, improving event reconstruction and pileup rejection. The central portion of the detector, the Barrel Timing Layer (BTL), will be instrumented with LYSO:Ce crystals and Silicon Photomultipliers (SiPMs) providing a time resolution of about…
▽ More
The MIP Timing Detector will provide additional timing capabilities for detection of minimum ionizing particles (MIPs) at CMS during the High Luminosity LHC era, improving event reconstruction and pileup rejection. The central portion of the detector, the Barrel Timing Layer (BTL), will be instrumented with LYSO:Ce crystals and Silicon Photomultipliers (SiPMs) providing a time resolution of about 30 ps at the beginning of operation, and degrading to 50-60 ps at the end of the detector lifetime as a result of radiation damage. In this work, we present the results obtained using a 120 GeV proton beam at the Fermilab Test Beam Facility to measure the time resolution of unirradiated sensors. A proof-of-concept of the sensor layout proposed for the barrel region of the MTD, consisting of elongated crystal bars with dimensions of about 3 x 3 x 57 mm$^3$ and with double-ended SiPM readout, is demonstrated. This design provides a robust time measurement independent of the impact point of the MIP along the crystal bar. We tested LYSO:Ce bars of different thickness (2, 3, 4 mm) with a geometry close to the reference design and coupled to SiPMs manufactured by Hamamatsu and Fondazione Bruno Kessler. The various aspects influencing the timing performance such as the crystal thickness, properties of the SiPMs (e.g. photon detection efficiency), and impact angle of the MIP are studied. A time resolution of about 28 ps is measured for MIPs crossing a 3 mm thick crystal bar, corresponding to an MPV energy deposition of 2.6 MeV, and of 22 ps for the 4.2 MeV MPV energy deposition expected in the BTL, matching the detector performance target for unirradiated devices.
△ Less
Submitted 16 July, 2021; v1 submitted 15 April, 2021;
originally announced April 2021.
-
Characterization studies of Silicon Photomultipliers and crystals matrices for a novel time of flight PET detector
Authors:
Etiennette Auffray,
Faraah Ben Mimoun Bel Hadj,
Daniele Cortinovis,
Katayoun Doroud,
Erika Garutti,
Paul Lecoq,
Zheng Liu,
Rosana Martinez,
Marco Paganoni,
Marco Pizzichemi,
Alessandro Silenzi,
Chen Xu,
Milan Zvolský
Abstract:
This paper describes the characterization of crystal matrices and silicon photomultiplier arrays for a novel Positron Emission Tomography (PET) detector, namely the external plate of the EndoTOFPET-US system. The EndoTOFPET-US collaboration aims to integrate Time-Of-Flight PET with ultrasound endoscopy in a novel multimodal device, capable to support the development of new biomarkers for prostate…
▽ More
This paper describes the characterization of crystal matrices and silicon photomultiplier arrays for a novel Positron Emission Tomography (PET) detector, namely the external plate of the EndoTOFPET-US system. The EndoTOFPET-US collaboration aims to integrate Time-Of-Flight PET with ultrasound endoscopy in a novel multimodal device, capable to support the development of new biomarkers for prostate and pancreatic tumors. The detector consists in two parts: a PET head mounted on an ultrasound probe and an external PET plate. The challenging goal of 1 mm spatial resolution for the PET image requires a detector with small crystal size, and therefore high channel density: 4096 LYSO crystals individually readout by Silicon Photomultipliers (SiPM) make up the external plate. The quality and properties of these components must be assessed before the assembly. The dark count rate, gain, breakdown voltage and correlated noise of the SiPMs are measured, while the LYSO crystals are evaluated in terms of light yield and energy resolution. In order to effectively reduce the noise in the PET image, high time resolution for the gamma detection is mandatory. The Coincidence Time Resolution (CTR) of all the SiPMs assembled with crystals is measured, and results show a value close to the demanding goal of 200 ps FWHM. The light output is evaluated for every channel for a preliminary detector calibration, showing an average of about 1800 pixels fired on the SiPM for a 511 keV interaction. Finally, the average energy resolution at 511 keV is about 13 %, enough for effective Compton rejection.
△ Less
Submitted 17 January, 2015;
originally announced January 2015.
-
Radiation hardness qualification of PbWO4 scintillation crystals for the CMS Electromagnetic Calorimeter
Authors:
The CMS Electromagnetic Calorimeter Group,
P. Adzic,
N. Almeida,
D. Andelin,
I. Anicin,
Z. Antunovic,
R. Arcidiacono,
M. W. Arenton,
E. Auffray,
S. Argiro,
A. Askew,
S. Baccaro,
S. Baffioni,
M. Balazs,
D. Bandurin,
D. Barney,
L. M. Barone,
A. Bartoloni,
C. Baty,
S. Beauceron,
K. W. Bell,
C. Bernet,
M. Besancon,
B. Betev,
R. Beuselinck
, et al. (245 additional authors not shown)
Abstract:
Ensuring the radiation hardness of PbWO4 crystals was one of the main priorities during the construction of the electromagnetic calorimeter of the CMS experiment at CERN. The production on an industrial scale of radiation hard crystals and their certification over a period of several years represented a difficult challenge both for CMS and for the crystal suppliers. The present article reviews t…
▽ More
Ensuring the radiation hardness of PbWO4 crystals was one of the main priorities during the construction of the electromagnetic calorimeter of the CMS experiment at CERN. The production on an industrial scale of radiation hard crystals and their certification over a period of several years represented a difficult challenge both for CMS and for the crystal suppliers. The present article reviews the related scientific and technological problems encountered.
△ Less
Submitted 21 December, 2009;
originally announced December 2009.
-
PWO crystals for CMS electromagnetic calorimeter : studies of the radiation damage kinetics
Authors:
G. Drobychev,
E. Auffray,
V. Dormenev,
M. Korzhik,
P. Lecoq,
A. Lopatic,
P. Nédélec,
J. P. Peigneux,
D. Sillou
Abstract:
Kinetics of radiation damage of the PWO crystals under irradiation and recovery were studied. Crystals were irradiated with dose corresponding to average one expected in the electromagnetic calorimeter (working dose irradiation). Radiation damage and recovery were monitored through measurements of PWO optical transmission. An approach is proposed which allows evaluating the influence of the PWO…
▽ More
Kinetics of radiation damage of the PWO crystals under irradiation and recovery were studied. Crystals were irradiated with dose corresponding to average one expected in the electromagnetic calorimeter (working dose irradiation). Radiation damage and recovery were monitored through measurements of PWO optical transmission. An approach is proposed which allows evaluating the influence of the PWO crystals properties on the statistical term in the energy resolution of the electromagnetic calorimeter. The analysis also gives important information about the nature of the radiation damage mechanism in scintillation crystals. The method was used during development of technology of the mass production of radiation hard crystals and during development of methods for crystals certification
△ Less
Submitted 18 April, 2005;
originally announced April 2005.
