Showing 1–50 of 52 results for author: Atwater, H

Direct Radiation Pressure Measurements for Lightsail Membranes

Authors: Lior Michaeli, Ramon Gao, Michael D. Kelzenberg, Claudio U. Hail, Adrien Merkt, John E. Sader, Harry A. Atwater

Abstract: Ultrathin lightsails propelled by laser radiation pressure to relativistic speeds are currently the most promising route for flyby-based exoplanet exploration. However, there has been a notable lack of experimental characterization of key parameters essential for lightsail propulsion. Therefore, a model platform for optomechanical characterization of lightsail prototypes made from realistic materi… ▽ More Ultrathin lightsails propelled by laser radiation pressure to relativistic speeds are currently the most promising route for flyby-based exoplanet exploration. However, there has been a notable lack of experimental characterization of key parameters essential for lightsail propulsion. Therefore, a model platform for optomechanical characterization of lightsail prototypes made from realistic materials is needed. We propose an approach for simultaneous measurement of optical forces and driving powers, which capitalizes on the multiphysics dynamics induced by the driving laser beam. By modelling the lightsail with a 50-nm thick silicon nitride membrane suspended by compliant micromechanical springs, we quantify force from off-resonantly driven displacement and power from heating-induced mechanical mode softening. This approach allows us to calibrate the measured forces to the driving powers by operating the device as a mechanical bolometer. We report radiation pressure forces of 80 fN using a collimated pump beam of 100 W/cm2 and noise-robust common-path interferometry. As lightsails will inevitably experience non-normal forces, we quantify the effects of incidence angle and spot size on the optical force and explain the nonintuitive trend by edge scattering. Our results provide a framework for comprehensive lightsail characterization and laboratory optomechanical manipulation of macroscopic objects by radiation pressure forces. △ Less

Submitted 29 February, 2024; originally announced March 2024.

Third harmonic generation enhancement and wavefront control using a local high-Q metasurface

Authors: Claudio U. Hail, Lior Michaeli, Harry A. Atwater

Abstract: High quality factor optical nanostructures provide great opportunity to enhance nonlinear optical processes such as third harmonic generation. However, the field enhancement in these high quality factor structures is typically accompanied by optical mode nonlocality. As a result, the enhancement of nonlinear processes comes at the cost of their local control as needed for nonlinear wavefront shapi… ▽ More High quality factor optical nanostructures provide great opportunity to enhance nonlinear optical processes such as third harmonic generation. However, the field enhancement in these high quality factor structures is typically accompanied by optical mode nonlocality. As a result, the enhancement of nonlinear processes comes at the cost of their local control as needed for nonlinear wavefront sha**, imaging and holography. Here we show simultaneous strong enhancement and spatial control over third harmonic generation with a local high-Q metasurface relying on higher-order Mie-resonant modes. Our results demonstrate third harmonic generation at an efficiency of up to $3.25\times10^{-5}$, high quality wavefront sha** as illustrated by a third harmonic metalens, and a flatband, angle independent, third harmonic response up to $\pm11^{\circ}$ incident angle. The demonstrated high level of local control and efficient frequency conversion offer promising prospects for realizing novel nonlinear optical devices. △ Less

Submitted 20 November, 2023; originally announced November 2023.

Comments: 19 pages, 11 figures

All-dielectric high-Q dynamically tunable transmissive metasurfaces

Authors: Ruzan Sokhoyan, Claudio U. Hail, Morgan Foley, Meir Y. Grajower, Harry A. Atwater

Abstract: Active metasurfaces, which are arrays of actively tunable resonant elements, can dynamically control the wavefront of the scattered light at a subwavelength scale. To date, most active metasurfaces that enable dynamic wavefront sha** operate in reflection. On the other hand, active metasurfaces operating in transmission are of considerable interest as they can readily be integrated with chip-sca… ▽ More Active metasurfaces, which are arrays of actively tunable resonant elements, can dynamically control the wavefront of the scattered light at a subwavelength scale. To date, most active metasurfaces that enable dynamic wavefront sha** operate in reflection. On the other hand, active metasurfaces operating in transmission are of considerable interest as they can readily be integrated with chip-scale light sources, yielding ultra-compact wavefront sha** devices. Here, we report designs for all-dielectric low-loss active metasurfaces which can dynamically manipulate the transmitted light wavefront in the near-infrared wavelength range. Our active metasurfaces feature an array of amorphous silicon (a-Si) pillars on a silica substate, which support resonances with quality factors (Q-factors) as high as 9800, as well as other lower-Q resonances. First, we demonstrate that high-Q resonance dips observed in transmission can be transformed into a transmission resonance peak by positioning a-Si pillar resonators at a prescribed distance from a crystalline Si substrate, defined by a silica spacer layer. Next, we report the design of metasurface geometry with realistic interconnect architectures that enable thermo-optic dynamic beam switching with switching times as low as 7.3 μs. Beam switching is observed for refractive index differences between neighboring metasurface elements as low as 0.0026. Finally, we demonstrate that metasurface structures with both high-Q and lower-Q modes and realistic interconnect architectures can be used for dynamic beam steering. △ Less

Submitted 14 September, 2023; originally announced September 2023.

Detecting, distinguishing, and spatiotemporally tracking photogenerated charge and heat at the nanoscale

Authors: Hannah L. Weaver, Cora M. Went, Joeson Wong, Dipti Jasrasaria, Eran Rabani, Harry A. Atwater, Naomi S. Ginsberg

Abstract: Since dissipative processes are ubiquitous in semiconductors, characterizing how electronic and thermal energy transduce and transport at the nanoscale is vital for understanding and leveraging their fundamental properties. For example, in low-dimensional transition metal dichalcogenides (TMDCs), excess heat generation upon photoexcitation is difficult to avoid since even with modest injected exci… ▽ More Since dissipative processes are ubiquitous in semiconductors, characterizing how electronic and thermal energy transduce and transport at the nanoscale is vital for understanding and leveraging their fundamental properties. For example, in low-dimensional transition metal dichalcogenides (TMDCs), excess heat generation upon photoexcitation is difficult to avoid since even with modest injected exciton densities, exciton-exciton annihilation still occurs. Both heat and photoexcited electronic species imprint transient changes in the optical response of a semiconductor, yet the unique signatures of each are difficult to disentangle in typical spectra due to overlap** resonances. In response, we employ stroboscopic optical scattering microscopy (stroboSCAT) to simultaneously map both heat and exciton populations in few-layer \ch{MoS2} on relevant nanometer and picosecond length- and time scales and with 100-mK temperature sensitivity. We discern excitonic contributions to the signal from heat by combining observations close to and far from exciton resonances, characterizing photoinduced dynamics for each. Our approach is general and can be applied to any electronic material, including thermoelectrics, where heat and electronic observables spatially interplay, and lays the groundwork for direct and quantitative discernment of different types of coexisting energy without recourse to complex models or underlying assumptions. △ Less

Submitted 5 August, 2023; v1 submitted 23 May, 2023; originally announced May 2023.

Comments: 23 pages, 4 figures, SI included as ancilliary file

Kerker Transform: Expanding Fields in a Discrete Basis of Directional Harmonics

Authors: Parker R. Wray, Harry A. Atwater

Abstract: We present a linear coordinate transform to expand the solution of scattering and emission problems into a basis of forward and backward directional vector harmonics. The transform provides intuitive algebraic and geometric interpretations of systems with directional scattering/emission across a broad range of wavelength-to-size ratios. The Kerker, generalized Kerker, and transverse Kerker effect… ▽ More We present a linear coordinate transform to expand the solution of scattering and emission problems into a basis of forward and backward directional vector harmonics. The transform provides intuitive algebraic and geometric interpretations of systems with directional scattering/emission across a broad range of wavelength-to-size ratios. The Kerker, generalized Kerker, and transverse Kerker effect as well as other forms of highly directional scattering/emission are easily understood through open and closed loop contours in the complex plane. Furthermore, the theoretical maximum directivity of any scattering/emissive system is easily defined. The transformed far field harmonics have coordinates that are polar-angle invariant, interference between forward and backward harmonics weakly interact, and interference of same type harmonics alters directivity. Examples of highly directional scattering are presented including a Kerker scattering magnetic sphere, a directional scattering photonic nanojet, both under plane wave illumination, as well as generalized backward Kerker and transverse Kerker emission from sub-wavelength spheres that are near-field coupled to emitters. Solutions of scattering/emission under the Kerker transform are contrasted to the traditional Mie expansion for comparison. △ Less

Submitted 7 March, 2023; originally announced March 2023.

Comments: 28 pages, 7 figures

Rydberg Excitons and Trions in Monolayer MoTe$_2$

Authors: Souvik Biswas, Aurélie Champagne, Jonah B. Haber, Supavit Pokawanvit, Joeson Wong, Hamidreza Akbari, Sergiy Krylyuk, Kenji Watanabe, Takashi Taniguchi, Albert V. Davydov, Zakaria Y. Al Balushi, Diana Y. Qiu, Felipe H. da Jornada, Jeffrey B. Neaton, Harry A. Atwater

Abstract: Monolayer transition metal dichalcogenide (TMDC) semiconductors exhibit strong excitonic optical resonances which serve as a microscopic, non-invasive probe into their fundamental properties. Like the hydrogen atom, such excitons can exhibit an entire Rydberg series of resonances. Excitons have been extensively studied in most TMDCs (MoS$_2$, MoSe$_2$, WS$_2$ and WSe$_2$), but detailed exploration… ▽ More Monolayer transition metal dichalcogenide (TMDC) semiconductors exhibit strong excitonic optical resonances which serve as a microscopic, non-invasive probe into their fundamental properties. Like the hydrogen atom, such excitons can exhibit an entire Rydberg series of resonances. Excitons have been extensively studied in most TMDCs (MoS$_2$, MoSe$_2$, WS$_2$ and WSe$_2$), but detailed exploration of excitonic phenomena has been lacking in the important TMDC material molybdenum ditelluride (MoTe$_2$). Here, we report an experimental investigation of excitonic luminescence properties of monolayer MoTe$_2$ to understand the excitonic Rydberg series, up to 3s. We report significant modification of emission energies with temperature (4K to 300K), quantifying the exciton-phonon coupling. Furthermore, we observe a strongly gate-tunable exciton-trion interplay for all the Rydberg states governed mainly by free-carrier screening, Pauli blocking, and band-gap renormalization in agreement with the results of first-principles GW plus Bethe-Salpeter equation approach calculations. Our results help bring monolayer MoTe$_2$ closer to its potential applications in near-infrared optoelectronics and photonic devices. △ Less

Submitted 7 February, 2023; originally announced February 2023.

Comments: 5 figures (main text)

Dynamically Stable Radiation Pressure Propulsion of Flexible Lightsails for Interstellar Exploration

Authors: Ramon Gao, Michael D. Kelzenberg, Harry A. Atwater

Abstract: Lightsail spacecraft, propelled to relativistic velocities via photon pressure using high power density laser radiation, offer a potentially new route to space exploration within and beyond the solar system, extending to interstellar distances. Such missions will require meter-scale lightsails of submicron thickness, posing substantial challenges for materials science and engineering. We analyze t… ▽ More Lightsail spacecraft, propelled to relativistic velocities via photon pressure using high power density laser radiation, offer a potentially new route to space exploration within and beyond the solar system, extending to interstellar distances. Such missions will require meter-scale lightsails of submicron thickness, posing substantial challenges for materials science and engineering. We analyze the structural and photonic design of flexible lightsails, develo** a mesh-based multiphysics simulator based on linear elastic theory, treating the lightsail as a flexible membrane rather than a rigid body. We find that flexible lightsail membranes can be spin stabilized to prevent shape collapse during acceleration, and that certain lightsail shapes and designs offer beam-riding stability despite the deformations caused by photon pressure and thermal expansion. Excitingly, nanophotonic lightsails based on planar silicon nitride membranes patterned with suitably designed optical metagratings exhibit both mechanically and dynamically stable propulsion along the pump laser axis. These advances suggest that laser-driven acceleration of membrane-like lightsails to the relativistic speeds needed to access interstellar distances is conceptually feasible, and that fabrication of such lightsails may be within the reach of modern microfabrication technology. △ Less

Submitted 21 January, 2023; originally announced January 2023.

Comments: 14 pages, 6 figures; plus 18-page SI with figures and linked videos

High quality factor metasurfaces for two-dimensional wavefront manipulation

Authors: Claudio U. Hail, Morgan Foley, Ruzan Sokhoyan, Lior Michaeli, Harry A. Atwater

Abstract: The strong interaction of light with micro- and nanostructures plays a critical role in optical sensing, nonlinear optics, active optical devices, and quantum optics. However, for wavefront sha**, the required local control over light at a subwavelength scale limits this interaction, typically leading to low-quality-factor optical devices. Here, we demonstrate an avenue towards high-quality-fact… ▽ More The strong interaction of light with micro- and nanostructures plays a critical role in optical sensing, nonlinear optics, active optical devices, and quantum optics. However, for wavefront sha**, the required local control over light at a subwavelength scale limits this interaction, typically leading to low-quality-factor optical devices. Here, we demonstrate an avenue towards high-quality-factor wavefront sha** in two spatial dimensions based on all-dielectric Huygens metasurfaces by leveraging higher-order Mie resonances. We design and experimentally realize transmissive band stop filters, beam deflectors and radial lenses with measured quality factors in the range of 202-1475 at near-infrared wavelengths. The excited optical mode and resulting wavefront control are both local, allowing versatile operation with finite apertures and oblique illumination. Our results represent an improvement in quality factor by nearly two orders of magnitude over previous localized mode designs, and provide a design approach for a new class of compact optical devices. △ Less

Submitted 11 December, 2022; originally announced December 2022.

Comments: 19 pages, 4 figures

Excitonic beam steering in an active van der Waals metasurface

Authors: Melissa Li, Claudio U. Hail, Souvik Biswas, Harry A. Atwater

Abstract: Two-dimensional transition metal dichalcogenides (2D TMDCs) are promising candidates for ultra-thin active nanophotonic elements due to the strong tunable excitonic resonances that dominate their optical response. Here we demonstrate dynamic beam steering by an active van der Waals metasurface that leverages large complex refractive index tunability near excitonic resonances in monolayer molybdenu… ▽ More Two-dimensional transition metal dichalcogenides (2D TMDCs) are promising candidates for ultra-thin active nanophotonic elements due to the strong tunable excitonic resonances that dominate their optical response. Here we demonstrate dynamic beam steering by an active van der Waals metasurface that leverages large complex refractive index tunability near excitonic resonances in monolayer molybdenum diselenide (MoSe2). Through varying the radiative and nonradiative rates of the excitons, we can dynamically control both the reflection amplitude and phase profiles, resulting in an excitonic phased array metasurface. Our experiments show reflected light steering to angles between -30° to 30° at three different resonant wavelengths corresponding to the A exciton, B exciton, and trion. This active van der Waals metasurface relies solely on the excitonic resonances of the monolayer MoSe2 material rather than geometric resonances of patterned nanostructures, suggesting the potential to harness the tunability of excitonic resonances for wavefront sha** in emerging photonic applications. △ Less

Submitted 16 November, 2022; originally announced November 2022.

Lifetime Limited and Tunable Quantum Light Emission in h-BN via Electric Field Modulation

Authors: Hamidreza Akbari, Souvik Biswas, Pankaj K. Jha, Joeson Wong, Benjamin Vest, Harry A. Atwater

Abstract: Color centered-based single photon emitters in hexagonal boron nitride (h-BN) have shown promising photophysical properties as sources for quantum light emission. Despite significant advances towards such a goal, achieving lifetime-limited quantum light emission in h-BN has proven to be challenging, primarily due to various broadening mechanisms including spectral diffusion. Here, we propose and e… ▽ More Color centered-based single photon emitters in hexagonal boron nitride (h-BN) have shown promising photophysical properties as sources for quantum light emission. Despite significant advances towards such a goal, achieving lifetime-limited quantum light emission in h-BN has proven to be challenging, primarily due to various broadening mechanisms including spectral diffusion. Here, we propose and experimentally demonstrate suppression of spectral diffusion by applying an electrostatic field. We observe both Stark shift tuning of the resonant emission wavelength, and emission linewidth reduction nearly to the homogeneously broadened lifetime limit. Lastly, we find a cubic dependence of the linewidth with respect to temperature at the homogeneous broadening regime. Our results suggest that field tuning in electrostatically gated heterostructures is promising as an approach to control the emission characteristics of h-BN color centers, removing spectral diffusion and providing the energy tunability necessary for integrate of quantum light emission in nanophotonic architectures. △ Less

Submitted 21 June, 2022; originally announced June 2022.

Nonreciprocal Infrared Absorption via Resonant Magneto-optical Coupling to InAs

Authors: Komron Shayegan, Bo Zhao, Yonghwi Kim, Shanhui Fan, Harry Atwater

Abstract: Nonreciprocal elements are a vital building block of electrical and optical systems. In the infrared regime, there is a particular interest in structures that break reciprocity because their thermal absorptive (and emissive) properties should not obey the Kirchhoff thermal radiation law. In this work, we break time-reversal symmetry and reciprocity in n-type doped magneto-optic InAs with a static… ▽ More Nonreciprocal elements are a vital building block of electrical and optical systems. In the infrared regime, there is a particular interest in structures that break reciprocity because their thermal absorptive (and emissive) properties should not obey the Kirchhoff thermal radiation law. In this work, we break time-reversal symmetry and reciprocity in n-type doped magneto-optic InAs with a static magnetic field where light coupling is mediated by a guided-mode-resonator (GMR) structure whose resonant frequency coincides with the epsilon-near-zero (ENZ) resonance of the doped InAs. Using this structure, we observe the nonreciprocal absorptive behavior as a function of magnetic field and scattering angle in the infrared. Accounting for resonant and nonresonant optical scattering, we reliably model experimental results that break reciprocal absorption relations in the infrared. The ability to design such nonreciprocal absorbers opens an avenue to explore devices with unequal absorptivity and emissivity in specific channels. △ Less

Submitted 11 March, 2022; originally announced March 2022.

Comments: 6 Figures

Impact of Semiconductor Band Tails and Band Filling on Photovoltaic Efficiency Limits

Authors: Joeson Wong, Stefan T. Omelchenko, Harry A. Atwater

Abstract: The theoretical maximum efficiency of a solar cell is typically characterized by a detailed balance of optical absorption and emission for a semiconductor in the limit of unity radiative efficiency and an ideal step-function response for the density of states and absorbance at the semiconductor band edges, known as the Shockley-Queisser limit. However, real materials have non-abrupt band edges, wh… ▽ More The theoretical maximum efficiency of a solar cell is typically characterized by a detailed balance of optical absorption and emission for a semiconductor in the limit of unity radiative efficiency and an ideal step-function response for the density of states and absorbance at the semiconductor band edges, known as the Shockley-Queisser limit. However, real materials have non-abrupt band edges, which are typically characterized by an exponential distribution of states, known as an Urbach tail. We develop here a modified detailed balance limit of solar cells with imperfect band edges, using optoelectronic reciprocity relations. We find that for semiconductors whose band edges are broader than the thermal energy, kT, there is an effective renormalized bandgap given by the quasi-Fermi level splitting within the solar cell. This renormalized bandgap creates a Stokes shift between the onset of the absorption and photoluminescence emission energies, which significantly reduces the maximum achievable efficiency. The abruptness of the band edge density of states therefore has important implications for the maximum achievable photovoltaic efficiency. △ Less

Submitted 4 March, 2021; originally announced March 2021.

Comments: manuscript - 18 pages, 4 figures, supporting information - 25 pages, 9 figures

Spatiotemporal Imaging of Thickness-Induced Band Bending Junctions

Authors: Joeson Wong, Artur R. Davoyan, Bolin Liao, Andrey Krayev, Kiyoung Jo, Eli Rotenberg, Aaron Bostwick, Chris Jozwiak, Deep Jariwala, Ahmed Zewail, Harry A. Atwater

Abstract: Van der Waals materials exhibit naturally passivated surfaces and can form versatile heterostructures, enabling observation of carrier transport mechanisms not seen in three-dimensional materials. Here we report observation of a "band bending junction", a new type of semiconductor homojunction whose surface potential landscape depends solely on a difference in thickness between the two semiconduct… ▽ More Van der Waals materials exhibit naturally passivated surfaces and can form versatile heterostructures, enabling observation of carrier transport mechanisms not seen in three-dimensional materials. Here we report observation of a "band bending junction", a new type of semiconductor homojunction whose surface potential landscape depends solely on a difference in thickness between the two semiconductor regions atop a buried heterojunction interface. Using MoS2 on Au to form a buried heterojunction interface, we find that lateral surface potential differences can arise in MoS2 from the local extent of vertical band bending in thin and thick MoS2 regions. Using scanning ultrafast electron microscopy, we examine the spatiotemporal dynamics of photogenerated charge carriers and find that lateral carrier separation is enabled by a band bending junction, which is confirmed with semiconductor transport simulations. Band bending junctions may therefore enable new electronic and optoelectronic devices in Van der Waals materials that rely on thickness variations rather than do** to separate charge carriers. △ Less

Submitted 4 March, 2021; originally announced March 2021.

Comments: 16 pages, 4 figures

Tunable intraband optical conductivity and polarization-dependent epsilon-near-zero behavior in black phosphorus

Authors: Souvik Biswas, William S. Whitney, Meir Y. Grajower, Kenji Watanabe, Takashi Taniguchi, Hans A. Bechtel, George R. Rossman, Harry A. Atwater

Abstract: Black phosphorus (BP) offers considerable promise for infrared and visible photonics. Efficient tuning of the bandgap and higher subbands in BP by modulation of the Fermi level or application of vertical electric fields has been previously demonstrated, allowing electrical control of its above bandgap optical properties. Here, we report modulation of the optical conductivity below the band-gap (5-… ▽ More Black phosphorus (BP) offers considerable promise for infrared and visible photonics. Efficient tuning of the bandgap and higher subbands in BP by modulation of the Fermi level or application of vertical electric fields has been previously demonstrated, allowing electrical control of its above bandgap optical properties. Here, we report modulation of the optical conductivity below the band-gap (5-15 um) by tuning the charge density in a two-dimensional electron gas (2DEG) induced in BP, thereby modifying its free carrier dominated intraband response. With a moderate do** density of 7x10^12/cm2 we were able to observe a polarization dependent epsilon-near-zero behavior in the dielectric permittivity of BP. The intraband polarization sensitivity is intimately linked to the difference in effective fermionic masses along the two crystallographic directions, as confirmed by our measurements. Our results suggest the potential of multilayer BP to allow new optical functions for emerging photonics applications. △ Less

Submitted 2 September, 2020; originally announced September 2020.

Comments: 17 pages, 4 figures

Nanoscale axial position and orientation measurement of hexagonal boron nitride quantum emitters using a tunable nanophotonic environment

Authors: Pankaj K. Jha, Hamidreza Akbari, Yonghwi Kim, Souvik Biswas, Harry A. Atwater

Abstract: Color centers in hexagonal boron nitride (hBN) have emerged as promising candidates for single-photon emitters (SPEs) due to their bright emission characteristics at room temperature. In contrast to mono- and few-layered hBN, color centers in multi-layered flakes show superior emission characteristics such as higher saturation counts and spectral stability. Here, we report a method for determining… ▽ More Color centers in hexagonal boron nitride (hBN) have emerged as promising candidates for single-photon emitters (SPEs) due to their bright emission characteristics at room temperature. In contrast to mono- and few-layered hBN, color centers in multi-layered flakes show superior emission characteristics such as higher saturation counts and spectral stability. Here, we report a method for determining both the axial position and three-dimensional dipole orientation of SPEs in thick hBN flakes by tuning the photonic local density of states using vanadium dioxide (VO2), a phase change material. Emitters under study exhibit a strong surface-normal dipole orientation, providing some insight on the atomic structure of hBN SPEs, deeply embedded in thick crystals. We have optimized a hot pickup technique to reproducibly transfer flakes of hBN from VO2 onto SiO2/Si substrate and relocated the same emitters. Our approach serves as a practical method to systematically characterize SPEs in hBN prior to integration in quantum photonics systems. △ Less

Submitted 23 February, 2021; v1 submitted 15 July, 2020; originally announced July 2020.

Comments: 33 pages, 5 figures, 1 Table, and 13 supplementary figures

Controlling the dopant profile for SRH suppression at low current densities in $λ\approx$ 1330nm GaInAsP light-emitting diodes

Authors: Parthiban Santhanam, Wei Li, Bo Zhao, Chris Rogers, Dodd Joseph Gray Jr., Phillip Jahelka, Harry A. Atwater, Shanhui Fan

Abstract: The quantum efficiency of double hetero-junction light-emitting diodes (LEDs) can be significantly enhanced at low current density by tailoring the spatial profile of dopants to suppress Shockley-Read-Hall (SRH) recombination. To demonstrate this effect we model, design, grow, fabricate, and test a GaInAsP LED ($λ\approx$ 1330nm) with an unconventional dopant profile. Compared against that of our… ▽ More The quantum efficiency of double hetero-junction light-emitting diodes (LEDs) can be significantly enhanced at low current density by tailoring the spatial profile of dopants to suppress Shockley-Read-Hall (SRH) recombination. To demonstrate this effect we model, design, grow, fabricate, and test a GaInAsP LED ($λ\approx$ 1330nm) with an unconventional dopant profile. Compared against that of our control design, which is a conventional $n^+$-$n$-$p^+$ double hetero-junction LED, the dopant profile near the $n$-$p^+$ hetero-structure of the new design displaces the built-in electric field in such a way as to suppress the J02 space charge recombination current. The design principle generalizes to other material systems and could be applicable to efforts to observe and exploit electro-luminescent refrigeration at practical power densities. △ Less

Submitted 29 January, 2020; originally announced January 2020.

Electro-Optically Tunable Universal Metasurfaces

Authors: Ghazaleh Kafaie Shirmanesh, Ruzan Sokhoyan, Pin Chieh Wu, Harry A. Atwater

Abstract: Molding the flow of light at the nanoscale has been a grand challenge of nanophotonics for decades. It is now widely recognized that metasurfaces represent a chip-scale nanophotonics array technology capable of comprehensively controlling the wavefront of light via appropriately configuring subwavelength antenna elements. Here, we demonstrate a reconfigurable metasurface that is universal, i.e., n… ▽ More Molding the flow of light at the nanoscale has been a grand challenge of nanophotonics for decades. It is now widely recognized that metasurfaces represent a chip-scale nanophotonics array technology capable of comprehensively controlling the wavefront of light via appropriately configuring subwavelength antenna elements. Here, we demonstrate a reconfigurable metasurface that is universal, i.e., notionally capable of providing diverse optical functions in the telecommunication wavelength regime, using a compact, lightweight, electronically-controlled array with no moving parts. By electro-optical control of the phase of the scattered light from identical individual metasurface elements, we demonstrate a single prototype universal programmable metasurface that is capable of both dynamic beam steering and reconfigurable light focusing using one single device. Reconfigurable universal metasurfaces with arrays of tunable optical antennas thus can perform arbitrary optical functions by programmable array-level control of scattered light phase, amplitude, and polarization, similar to dynamic and programmable memories in electronics. △ Less

Submitted 4 October, 2019; originally announced October 2019.

Comments: 10 pages, 4 figures

Experimental demonstration of tunable graphene hyperbolic metamaterial

Authors: Jeremy Brouillet, Georgia T. Papadakis, Harry A. Atwater

Abstract: Tuning the macroscopic dielectric response on demand holds potential for actively tunable metaphotonics and optical devices. In recent years, graphene has been extensively investigated as a tunable element in nanophotonics. Significant theoretical work has been devoted on the tuning the hyperbolic properties of graphene/dielectric heterostructures, however, until now, such a motif has not been dem… ▽ More Tuning the macroscopic dielectric response on demand holds potential for actively tunable metaphotonics and optical devices. In recent years, graphene has been extensively investigated as a tunable element in nanophotonics. Significant theoretical work has been devoted on the tuning the hyperbolic properties of graphene/dielectric heterostructures, however, until now, such a motif has not been demonstrated experimentally. Here we focus on a graphene/polaritonic dielectric metamaterial, with strong optical resonances arising from the polar response of the dielectric, which are, in general, difficult to actively control. By controlling the do** level of graphene via external bias we experimentally demonstrate a wide range of tunability from a Fermi level of EF = 0 eV to EF = 0.5 eV, which yields an effective epsilon-near-zero crossing and tunable dielectric properties, verified through spectroscopic ellipsometry and transmission measurements. △ Less

Submitted 8 July, 2019; v1 submitted 25 June, 2019; originally announced June 2019.

A new metal transfer process for van der Waals contacts to vertical Schottky-junction transition metal dichalcogenide photovoltaics

Authors: Cora M. Went, Joeson Wong, Phillip R. Jahelka, Michael Kelzenberg, Souvik Biswas, Harry A. Atwater

Abstract: Two-dimensional transition metal dichalcogenides are promising candidates for ultrathin optoelectronic devices due to their high absorption coefficients and intrinsically passivated surfaces. To maintain these near-perfect surfaces, recent research has focused on fabricating contacts that limit Fermi-level pinning at the metal-semiconductor interface. Here, we develop a new, simple procedure for t… ▽ More Two-dimensional transition metal dichalcogenides are promising candidates for ultrathin optoelectronic devices due to their high absorption coefficients and intrinsically passivated surfaces. To maintain these near-perfect surfaces, recent research has focused on fabricating contacts that limit Fermi-level pinning at the metal-semiconductor interface. Here, we develop a new, simple procedure for transferring metal contacts that does not require aligned lithography. Using this technique, we fabricate vertical Schottky-junction $WS_2$ solar cells with Ag and Au as asymmetric work function contacts. Under laser illumination, we observe rectifying behavior and open-circuit voltage above 500 mV in devices with transferred contacts, in contrast to resistive behavior and open-circuit voltage below 15 mV in devices with evaporated contacts. One-sun measurements and device simulation results indicate that this metal transfer process could enable high-specific-power vertical Schottky-junction transition metal dichalcogenide photovoltaics, and we anticipate that this technique will lead to advances for two-dimensional devices more broadly. △ Less

Submitted 4 April, 2019; v1 submitted 19 March, 2019; originally announced March 2019.

Comments: 32 pages, 6 figures, and 9 supplementary figures. Version 2 has updated introduction and abstract; results are unchanged

Lightweight Carbon Fiber Mirrors for Solar Concentrator Applications

Authors: Nina Vaidya, Michael D. Kelzenberg, Pilar Espinet-González, Tatiana G. Vinogradova, **g-Shun Huang, Christophe Leclerc, Ali Naqavi, Emily C. Warmann, Sergio Pellegrino, Harry A. Atwater

Abstract: Lightweight parabolic mirrors for solar concentrators have been fabricated using carbon fiber reinforced polymer (CFRP) and a nanometer scale optical surface smoothing technique. The smoothing technique improved the surface roughness of the CFRP surface from ~3 μm root mean square (RMS) for as-cast to ~5 nm RMS after smoothing. The surfaces were then coated with metal, which retained the sub-wavel… ▽ More Lightweight parabolic mirrors for solar concentrators have been fabricated using carbon fiber reinforced polymer (CFRP) and a nanometer scale optical surface smoothing technique. The smoothing technique improved the surface roughness of the CFRP surface from ~3 μm root mean square (RMS) for as-cast to ~5 nm RMS after smoothing. The surfaces were then coated with metal, which retained the sub-wavelength surface roughness, to produce a high-quality specular reflector. The mirrors were tested in an 11x geometrical concentrator configuration and achieved an optical efficiency of 78% under an AM0 solar simulator. With further development, lightweight CFRP mirrors will enable dramatic improvements in the specific power, power per unit mass, achievable for concentrated photovoltaics in space. △ Less

Submitted 1 October, 2018; originally announced October 2018.

Comments: IEEE Photovoltaic Specialist Conference (PVSC), DC, USA, 2017

Journal ref: IEEE PVSC-44, DC, USA, 2017

Quantum Coherence is Preserved in Extremely Dispersive Plasmonic Media

Authors: Yury S. Tokpanov, James S. Fakonas, Benjamin Vest, Harry A. Atwater

Abstract: Quantum plasmonics experiments have on multiple occasions reported the observation of quantum coherence of discrete plasmons, which exhibit remarkable preservation of quantum interference visibility, a seemingly surprising feature for systems mixing light and matter with high ohmic losses during propagation. However, most experiments to date used essentially weakly-confined plasmons, which experie… ▽ More Quantum plasmonics experiments have on multiple occasions reported the observation of quantum coherence of discrete plasmons, which exhibit remarkable preservation of quantum interference visibility, a seemingly surprising feature for systems mixing light and matter with high ohmic losses during propagation. However, most experiments to date used essentially weakly-confined plasmons, which experience limited light-matter hybridization, thus limiting the potential for decoherence. Here, we report quantum coherence of plasmons near the surface plasmon polariton (SPP) resonance frequency, where plasmonic dispersion and confinement is much stronger than in previous experiments. We generated polarization-entangled pairs of photons using spontaneous parametric down conversion and transmitted one of the photons through a plasmonic hole array designed to convert incident single photons into highly-dispersive single SPPs. We find the quality of photon entanglement after the plasmonic channel to be unperturbed by the introduction of a highly dispersive plasmonic element. Our findings provide a lower bound of 100 femtoseconds for the pure dephasing time for dispersive plasmons in gold, and show that even in a highly dispersive regime surface plasmons preserve quantum mechanical correlations, making possible harnessing the power of extreme light confinement for integrated quantum photonics. △ Less

Submitted 30 April, 2019; v1 submitted 28 September, 2018; originally announced October 2018.

Comments: Main text: 7 pages, 4 figures. Supplemental materials: 5 pages, 5 figures

Journal ref: Phys. Rev. Applied 12, 044037 (2019)

Absolute and arbitrary orientation of single molecule shapes

Authors: Ashwin Gopinath, Chris Thachuk, Anya Mitskovets, Harry A. Atwater, David Kirkpatrick, Paul W. K. Rothemund

Abstract: DNA origami is a modular platform for the combination of molecular and colloidal components to create optical, electronic, and biological devices. Integration of such nanoscale devices with microfabricated connectors and circuits is challenging: large numbers of freely diffusing devices must be fixed at desired locations with desired alignment. We present a DNA origami molecule whose energy landsc… ▽ More DNA origami is a modular platform for the combination of molecular and colloidal components to create optical, electronic, and biological devices. Integration of such nanoscale devices with microfabricated connectors and circuits is challenging: large numbers of freely diffusing devices must be fixed at desired locations with desired alignment. We present a DNA origami molecule whose energy landscape on lithographic binding sites has a unique maximum. This property enables device alignment within 3.2$^{\circ}$ on SiO$_2$. Orientation is absolute (all degrees of freedom are specified) and arbitrary (every molecule's orientation is independently specified). The use of orientation to optimize device performance is shown by aligning fluorescent emission dipoles within microfabricated optical cavities. Large-scale integration is demonstrated via an array of 3,456 DNA origami with 12 distinct orientations, which indicates the polarization of excitation light. △ Less

Submitted 14 August, 2018; originally announced August 2018.

Comments: 8 page main text, 24 page supplementary section

Van der Waals Materials for Atomically-Thin Photovoltaics: Promise and Outlook

Authors: Deep Jariwala, Artur R. Davoyan, Joeson Wong, Harry A. Atwater

Abstract: Two-dimensional (2D) semiconductors provide a unique opportunity for optoelectronics due to their layered atomic structure, electronic and optical properties. To date, a majority of the application-oriented research in this field has been focused on field-effect electronics as well as photodetectors and light emitting diodes. Here we present a perspective on the use of 2D semiconductors for photov… ▽ More Two-dimensional (2D) semiconductors provide a unique opportunity for optoelectronics due to their layered atomic structure, electronic and optical properties. To date, a majority of the application-oriented research in this field has been focused on field-effect electronics as well as photodetectors and light emitting diodes. Here we present a perspective on the use of 2D semiconductors for photovoltaic applications. We discuss photonic device designs that enable light trap** in nanometer-thickness absorber layers, and we also outline schemes for efficient carrier transport and collection. We further provide theoretical estimates of efficiency indicating that 2D semiconductors can indeed be competitive with and complementary to conventional photovoltaics, based on favorable energy bandgap, absorption, external radiative efficiency, along with recent experimental demonstrations. Photonic and electronic design of 2D semiconductor photovoltaics represents a new direction for realizing ultrathin, efficient solar cells with applications ranging from conventional power generation to portable and ultralight solar power. △ Less

Submitted 24 October, 2017; originally announced October 2017.

Comments: 4 figures

Extremely broadband ultralight thermally emissive metasurfaces

Authors: Ali Naqavi, Samuel P. Loke, Michael D. Kelzenberg, Dennis M. Callahan, Emily C. Warmann, Pilar Espinet-González, Nina Vaidya, Tatiana A. Roy, **g-Shun Huang, Tatiana G. Vinogradova, Alexander J. Messer, Harry A. Atwater

Abstract: We report the design, fabrication and characterization of ultralight highly emissive metaphotonic structures with record-low mass/area that emit thermal radiation efficiently over a broad spectral (2 to 35 microns) and angular (0-60 degrees) range. The structures comprise one to three pairs of alternating nanometer-scale metallic and dielectric layers, and have measured effective 300 K hemispheric… ▽ More We report the design, fabrication and characterization of ultralight highly emissive metaphotonic structures with record-low mass/area that emit thermal radiation efficiently over a broad spectral (2 to 35 microns) and angular (0-60 degrees) range. The structures comprise one to three pairs of alternating nanometer-scale metallic and dielectric layers, and have measured effective 300 K hemispherical emissivities of 0.7 to 0.9. To our knowledge, these structures, which are all subwavelength in thickness are the lightest reported metasurfaces with comparable infrared emissivity. The superior optical properties, together with their mechanical flexibility, low outgassing, and low areal mass, suggest that these metasurfaces are candidates for thermal management in applications demanding of ultralight flexible structures, including aerospace applications, ultralight photovoltaics, lightweight flexible electronics, and textiles for thermal insulation. △ Less

Submitted 8 October, 2017; originally announced October 2017.

Electrical Control of Linear Dichroism in Black Phosphorus from the Visible to Mid-Infrared

Authors: Michelle C. Sherrott, William S. Whitney, Deep Jariwala, Cora M. Went, Joeson Wong, George R. Rossman, Harry A. Atwater

Abstract: The incorporation of electrically tunable materials into photonic structures such as waveguides and metasurfaces enables dynamic control of light propagation by an applied potential. While many materials have been shown to exhibit electrically tunable permittivity and dispersion, including transparent conducting oxides (TCOs) and III-V semiconductors and quantum wells, these materials are all opti… ▽ More The incorporation of electrically tunable materials into photonic structures such as waveguides and metasurfaces enables dynamic control of light propagation by an applied potential. While many materials have been shown to exhibit electrically tunable permittivity and dispersion, including transparent conducting oxides (TCOs) and III-V semiconductors and quantum wells, these materials are all optically isotropic in the propagation plane. In this work, we report the first known example of electrically tunable linear dichroism, observed here in few-layer black phosphorus (BP), which is a promising candidate for multi-functional, broadband, tunable photonic elements. We measure active modulation of the linear dichroism from the mid-infrared to visible frequency range, which is driven by anisotropic quantum-confined Stark and Burstein-Moss effects, and field-induced forbidden-to-allowed optical transitions. Moreover, we observe high BP absorption modulation strengths, approaching unity for certain thicknesses and photon energies. △ Less

Submitted 29 September, 2017; originally announced October 2017.

Micro-optical Tandem Luminescent Solar Concentrators

Authors: David R. Needell, Ognjen Ilic, Colton R. Bukowsky, Zach Nett, Lu Xu, Junwen He, Haley Bauser, Benjamin G. Lee, John F. Geisz, Ralph G. Nuzzo, A. Paul Alivisatos, Harry A. Atwater

Abstract: Traditional concentrating photovoltaic (CPV) systems utilize multijunction cells to minimize thermalization losses, but cannot efficiently capture diffuse sunlight, which contributes to a high levelized cost of energy (LCOE) and limits their use to geographical regions with high direct sunlight insolation. Luminescent solar concentrators (LSCs) harness light generated by luminophores embedded in a… ▽ More Traditional concentrating photovoltaic (CPV) systems utilize multijunction cells to minimize thermalization losses, but cannot efficiently capture diffuse sunlight, which contributes to a high levelized cost of energy (LCOE) and limits their use to geographical regions with high direct sunlight insolation. Luminescent solar concentrators (LSCs) harness light generated by luminophores embedded in a light-trap** waveguide to concentrate light onto smaller cells. LSCs can absorb both direct and diffuse sunlight, and thus can operate as flat plate receivers at a fixed tilt and with a conventional module form factor. However, current LSCs experience significant power loss through parasitic luminophore absorption and incomplete light trap** by the optical waveguide. Here we introduce a tandem LSC device architecture that overcomes both of these limitations, consisting of a PLMA polymer layer with embedded CdSe/CdS quantum dot (QD) luminophores and InGaP micro-cells, which serve as a high bandgap absorber on top of a conventional Si photovoltaic. We experimentally synthesize CdSe/CdS QDs with exceptionally high quantum-yield (99%) and ultra-narrowband emission optimally matched to fabricated III-V InGaP micro-cells. Using a Monte Carlo ray-tracing model, we show the radiative limit power conversion efficiency for a module with these components to be 30.8% diffuse sunlight conditions. These results indicate that a tandem LSC-on-Si architecture could significantly improve upon the efficiency of a conventional Si photovoltaic module with simple and straightforward alterations of the module lamination steps of a Si photovoltaic manufacturing process, with promise for widespread module deployment across diverse geographical regions and energy markets. △ Less

Submitted 5 September, 2017; originally announced October 2017.

Purcell Enhancement of Parametric Luminescence: Bright and Broadband Nonlinear Light Emission in Metamaterials

Authors: Artur R. Davoyan, Harry A. Atwater

Abstract: Single-photon and correlated two-photon sources are important elements for optical information systems. Nonlinear downconversion light sources are robust and stable emitters of single photons and entangled photon pairs. However, the rate of downconverted light emission, dictated by the properties of low-symmetry nonlinear crystals, is typically very small, leading to significant constrains in devi… ▽ More Single-photon and correlated two-photon sources are important elements for optical information systems. Nonlinear downconversion light sources are robust and stable emitters of single photons and entangled photon pairs. However, the rate of downconverted light emission, dictated by the properties of low-symmetry nonlinear crystals, is typically very small, leading to significant constrains in device design and integration. In this paper, we show that the principles for spontaneous emission control (i.e. Purcell effect) of isolated emitters in nanoscale structures, such as metamaterials, can be generalized to describe the enhancement of nonlinear light generation processes such as parametric down conversion. We develop a novel theoretical framework for quantum nonlinear emission in a general anisotropic, dispersive and lossy media. We further find that spontaneous parametric downconversion in media with hyperbolic dispersion is broadband and phase-mismatch-free. We predict a 1000-fold enhancement of the downconverted emission rate with up to 105 photon pairs per second in experimentally realistic nanostructures. Our theoretical formalism and approach to Purcell enhancement of nonlinear optical processes, provides a framework for description of quantum nonlinear optical phenomena in complex nanophotonic structures. △ Less

Submitted 20 September, 2017; originally announced September 2017.

Comments: 29 pages, 10 figures

Hot Carrier Dynamics in Photoexcited Gold Nanostructures: Role of Interband Excitations and Evidence for Ballistic Transport

Authors: Giulia Tagliabue, Adam S Jermyn, Ravishankar Sundararaman, Alex J Welch, Joseph S DuChene, Artur R Davoyan, Prineha Narang, Harry A Atwater

Abstract: Harnessing short-lived photoexcited electron-hole pairs in metal nanostructures has the potential to define a new phase of optoelectronics, enabling control of athermal mechanisms for light harvesting, photodetection and photocatalysis. To date, however, the spatiotemporal dynamics and transport of these photoexcited carriers have been only qualitatively characterized. Plasmon excitation has been… ▽ More Harnessing short-lived photoexcited electron-hole pairs in metal nanostructures has the potential to define a new phase of optoelectronics, enabling control of athermal mechanisms for light harvesting, photodetection and photocatalysis. To date, however, the spatiotemporal dynamics and transport of these photoexcited carriers have been only qualitatively characterized. Plasmon excitation has been widely viewed as an efficient mechanism for generating non-thermal hot carriers. Despite numerous experiments, conclusive evidence elucidating and quantifying the full dynamics of hot carrier generation, transport, and injection has not been reported. Here, we combine experimental measurements with coupled first-principles electronic structure theory and Boltzmann transport calculations to provide unprecedented insight into the internal quantum efficiency, and hence internal physics, of hot carriers in photoexcited gold (Au)-gallium nitride (GaN) nanostructures. Our results indicate that photoexcited electrons generated in 20 nm-thick Au nanostructures im**e ballistically on the Au-GaN interface. This discovery suggests that the energy of hot carriers could be harnessed from metal nanostructures without substantial losses via thermalization. Measurements and calculations also reveal the important role of metal band structure in hot carrier generation at energies above the interband threshold of the plasmonic nanoantenna. Taken together, our results advance the understanding of excited carrier dynamics in realistically-scaled metallic nanostructures and lay the foundations for the design of new optoelectronic devices that operate in the ballistic regime. △ Less

Submitted 7 August, 2017; originally announced August 2017.

Comments: 9 pages, 4 figures

Transport of hot carriers in plasmonic nanostructures

Authors: Adam S. Jermyn, Giulia Tagliabue, Harry A. Atwater, William A. Goddard III, Prineha Narang, Ravishankar Sundararaman

Abstract: Plasmonic hot carrier devices extract excited carriers from metal nanostructures before equilibration, and have the potential to surpass semiconductor light absorbers. However their efficiencies have so far remained well below theoretical limits, which necessitates quantitative prediction of carrier transport and energy loss in plasmonic structures to identify and overcome bottlenecks in carrier h… ▽ More Plasmonic hot carrier devices extract excited carriers from metal nanostructures before equilibration, and have the potential to surpass semiconductor light absorbers. However their efficiencies have so far remained well below theoretical limits, which necessitates quantitative prediction of carrier transport and energy loss in plasmonic structures to identify and overcome bottlenecks in carrier harvesting. Here, we present a theoretical and computational framework, Non-Equilibrium Scattering in Space and Energy (NESSE), to predict the spatial evolution of carrier energy distributions that combines the best features of phase-space (Boltzmann) and particle-based (Monte Carlo) methods. Within the NESSE framework, we bridge first-principles electronic structure predictions of plasmon decay and carrier collision integrals at the atomic scale, with electromagnetic field simulations at the nano- to mesoscale. Finally, we apply NESSE to predict spatially-resolved energy distributions of photo-excited carriers that impact the surface of experimentally realizable plasmonic nanostructures at length scales ranging from tens to several hundreds of nanometers, enabling first-principles design of hot carrier devices. △ Less

Submitted 19 June, 2019; v1 submitted 21 July, 2017; originally announced July 2017.

Comments: 10 pages, 5 figures

Journal ref: Phys. Rev. Materials 3, 075201 (2019)

High Photovoltaic Quantum Efficiency in Ultrathin van der Waals Heterostructures

Authors: Joeson Wong, Deep Jariwala, Giulia Tagliabue, Kevin Tat, Artur R. Davoyan, Michelle C. Sherrott, Harry A. Atwater

Abstract: We report experimental measurements for ultrathin (< 15 nm) van der Waals heterostructures exhibiting external quantum efficiencies exceeding 50%, and show that these structures can achieve experimental absorbance > 90%. By coupling electromagnetic simulations and experimental measurements, we show that pn WSe2/MoS2 heterojunctions with vertical carrier collection can have internal photocarrier co… ▽ More We report experimental measurements for ultrathin (< 15 nm) van der Waals heterostructures exhibiting external quantum efficiencies exceeding 50%, and show that these structures can achieve experimental absorbance > 90%. By coupling electromagnetic simulations and experimental measurements, we show that pn WSe2/MoS2 heterojunctions with vertical carrier collection can have internal photocarrier collection efficiencies exceeding 70%. △ Less

Submitted 8 June, 2017; originally announced June 2017.

Comments: ACS Nano, 2017. Manuscript (25 pages, 7 figures) plus supporting information (7 pages, 4 figures)

Atomic-scale Structural and Chemical Characterization of Hexagonal Boron Nitride Layers Synthesized at the Wafer-Scale with Monolayer Thickness Control

Authors: Wei-Hsiang Lin, Victor W. Brar, Deep Jariwala, Michelle C. Sherrott, Wei-Shiuan Tseng, Chih-I Wu, Nai-Chang Yeh, Harry A. Atwater

Abstract: Hexagonal boron nitride (h-BN) is a promising two-dimensional insulator with a large band gap and low density of charged impurities that is isostructural and isoelectronic with graphene. Here we report the chemical and atomic-scale structure of CVD-grown wafer-scale (~25 cm2) h-BN sheets ranging in thickness from 1-20 monolayers. Atomic-scale images of h-BN on Au and graphene/Au substrates obtaine… ▽ More Hexagonal boron nitride (h-BN) is a promising two-dimensional insulator with a large band gap and low density of charged impurities that is isostructural and isoelectronic with graphene. Here we report the chemical and atomic-scale structure of CVD-grown wafer-scale (~25 cm2) h-BN sheets ranging in thickness from 1-20 monolayers. Atomic-scale images of h-BN on Au and graphene/Au substrates obtained by scanning tunneling microscopy (STM) reveal high h-BN crystalline quality in monolayer samples. Further characterization of 1-20 monolayer samples indicates uniform thickness for wafer-scale areas; this thickness control is a result of precise control of the precursor flow rate, deposition temperature and pressure. Raman and infrared spectroscopy indicate the presence of B-N bonds and reveal a linear dependence of thickness with growth time. X-ray photoelectron spectroscopy (XPS) shows the film stoichiometry, and the B/N atom ratio in our films is 1 + 0.6% across the range of thicknesses. Electrical current transport in metal/insulator/metal (Au/h-BN/Au) heterostructures indicates that our CVD-grown h-BN films can act as excellent tunnel barriers with a high hard-breakdown field strength. Our results suggest that large-area h-BN films are structurally, chemically and electronically uniform over the wafer scale, opening the door to pervasive application as a dielectric in layered nanoelectronic and nanophotonic heterostructures. △ Less

Submitted 22 May, 2017; originally announced May 2017.

Comments: 26 pages, 5 figures

Limits to the Optical Response of Graphene and 2D Materials

Authors: Owen D. Miller, Ognjen Ilic, Thomas Christensen, M. T. Homer Reid, Harry A. Atwater, John D. Joannopoulos, Marin Soljacic, Steven G. Johnson

Abstract: 2D materials provide a platform for strong light--matter interactions, creating wide-ranging design opportunities via new-material discoveries and new methods for geometrical structuring. We derive general upper bounds to the strength of such light--matter interactions, given only the optical conductivity of the material, including spatial nonlocality, and otherwise independent of shape and config… ▽ More 2D materials provide a platform for strong light--matter interactions, creating wide-ranging design opportunities via new-material discoveries and new methods for geometrical structuring. We derive general upper bounds to the strength of such light--matter interactions, given only the optical conductivity of the material, including spatial nonlocality, and otherwise independent of shape and configuration. Our material figure of merit shows that highly doped graphene is an optimal material at infrared frequencies, whereas single-atomic-layer silver is optimal in the visible. For quantities ranging from absorption and scattering to near-field spontaneous-emission enhancements and radiative heat transfer, we consider canonical geometrical structures and show that in certain cases the bounds can be approached, while in others there may be significant opportunity for design improvement. The bounds can encourage systematic improvements in the design of ultrathin broadband absorbers, 2D antennas, and near-field energy harvesters. △ Less

Submitted 2 August, 2017; v1 submitted 9 May, 2017; originally announced May 2017.

Comments: 7 pages, 4 figures, plus references and supplementary material

Electronically Tunable Perfect Absorption in Graphene

Authors: Seyoon Kim, Min Seok Jang, Victor W. Brar, Kelly W. Mauser, Harry A. Atwater

Abstract: Graphene nanostructures that support surface plasmons have been utilized to create a variety of dynamically tunable light modulators, motivated by theoretical predictions of the potential for unity absorption in resonantly-excited monolayer graphene sheets. Until now, the generally low efficiencies of tunable resonant graphene absorbers have been limited by the mismatch between free-space photons… ▽ More Graphene nanostructures that support surface plasmons have been utilized to create a variety of dynamically tunable light modulators, motivated by theoretical predictions of the potential for unity absorption in resonantly-excited monolayer graphene sheets. Until now, the generally low efficiencies of tunable resonant graphene absorbers have been limited by the mismatch between free-space photons and graphene plasmons. Here, we develop nanophotonic structures that overcome this mismatch and demonstrate electronically tunable perfect absorption achieved with patterned graphenes covering less than 10% of the surface. Experimental measurements reveal 96.9% absorption in the graphene plasmonic nanostructure at 1,389 cm$^{-1}$, with an on/off modulation efficiency of 95.9% in reflection. An analytic effective surface admittance model elucidates the origin of perfect absorption, which is design for critical coupling between free-space modes and the graphene plasmonic nanostructures. △ Less

Submitted 10 March, 2017; originally announced March 2017.

Journal ref: Nano Lett, 18, 971-979 (2018)

Three-dimensional nanoimprint lithography using two-photon lithography master samples

Authors: Rebecca Saive, Colton R. Bukowsky, Harry A. Atwater

Abstract: We demonstrate three-dimensional (3-D) nanoimprint lithography using master samples initially structured by two-photon lithography. Complex geometries like micro prisms, micro parabolic concentrators, micro lenses and other micrometer sized objects with nanoscale features are three-dimensionally fabricated using two-photon lithography. Stamps made out of polydimethylsiloxane are then cast using th… ▽ More We demonstrate three-dimensional (3-D) nanoimprint lithography using master samples initially structured by two-photon lithography. Complex geometries like micro prisms, micro parabolic concentrators, micro lenses and other micrometer sized objects with nanoscale features are three-dimensionally fabricated using two-photon lithography. Stamps made out of polydimethylsiloxane are then cast using the two-photon lithographically structured samples as master samples. Hereby, expensive serial nano 3-D printing is transformed into scalable parallel 3-D nanoimprint lithography. Furthermore, the transition from two-photon lithography to imprint lithography increases the freedom in substrate and ink choice significantly. We demonstrate printing on textured surfaces as well as residue-free printing with silver ink using capillary action. △ Less

Submitted 13 February, 2017; originally announced February 2017.

Hyper-Selective Plasmonic Color Filters

Authors: Dagny Fleischman, Luke Sweatlock, Hirotaka Murakami, Harry Atwater

Abstract: The subwavelength mode volumes of plasmonic filters are well matched to the small size of state-of-the-art active pixels (~ 1 μm) in CMOS image sensor arrays used in portable electronic devices. Typical plasmonic filters exhibit broad (> 100 nm) transmission bandwidths. Dramatically reducing the peak width of filter transmission spectra would allow for the realization of CMOS hyperspectral imaging… ▽ More The subwavelength mode volumes of plasmonic filters are well matched to the small size of state-of-the-art active pixels (~ 1 μm) in CMOS image sensor arrays used in portable electronic devices. Typical plasmonic filters exhibit broad (> 100 nm) transmission bandwidths. Dramatically reducing the peak width of filter transmission spectra would allow for the realization of CMOS hyperspectral imaging arrays, which demand the FWHM of transmission peaks to be less than 30 nm. We find that the design of 5 layer metal-insulator-metal-insulator-metal structures gives rise to multi-mode interference phenomena that suppresses spurious transmission features gives rise to a single narrow transmission band with FWHM as small as 17 nm. The transmission peaks of these multilayer slot-mode plasmonic filters (MSPFs) can be systematically varied throughout the visible and near infrared spectrum, so the same basic structure can serve as a filter over a large range of wavelengths. △ Less

Submitted 5 December, 2016; originally announced December 2016.

Comments: 18 pages, 7 figures

Total Internal Reflection for Effectively Transparent Solar Cell Contacts

Authors: Phillip Jahelka, Rebecca Saive, Harry Atwater

Abstract: A new strategy for eliminating photocurrent losses due to the metal contacts on the front of a solar cell was proposed, simulated, and tested. By placing triangular cross-section lines of low refractive index on top of the contacts, total-internal reflection at the interface of the low-index triangles and the surrounding material can direct light away from the metal and into the photoactive absorb… ▽ More A new strategy for eliminating photocurrent losses due to the metal contacts on the front of a solar cell was proposed, simulated, and tested. By placing triangular cross-section lines of low refractive index on top of the contacts, total-internal reflection at the interface of the low-index triangles and the surrounding material can direct light away from the metal and into the photoactive absorber. Simulations indicated that losses can be eliminated for any incident angle, and that yearly energy production improvements commensurate with the metallized area are possible. Proof of principle experiments were carried out to eliminate the reflective losses of a commercial solar cell's busbar contact. Spatially resolved laser beam induced current measurements demonstrated that reflection losses due to the busbar were reduced by voids with triangular cross-section. △ Less

Submitted 4 October, 2016; originally announced October 2016.

Experimental and ab initio ultrafast carrier dynamics in plasmonic nanoparticles

Authors: Ana M. Brown, Ravishankar Sundararaman, Prineha Narang, Adam M. Schwartzberg, William A. Goddard III, Harry A. Atwater

Abstract: Ultrafast pump-probe measurements of plasmonic nanostructures probe the non-equilibrium behavior of excited carriers, which involves several competing effects obscured in typical empirical analyses. Here we present pump-probe measurements of plasmonic nanoparticles along with a complete theoretical description based on first-principles calculations of carrier dynamics and optical response, free of… ▽ More Ultrafast pump-probe measurements of plasmonic nanostructures probe the non-equilibrium behavior of excited carriers, which involves several competing effects obscured in typical empirical analyses. Here we present pump-probe measurements of plasmonic nanoparticles along with a complete theoretical description based on first-principles calculations of carrier dynamics and optical response, free of any fitting parameters. We account for detailed electronic-structure effects in the density of states, excited carrier distributions, electron-phonon coupling, and dielectric functions which allow us to avoid effective electron temperature approximations. Using this calculation method, we obtain excellent quantitative agreement with spectral and temporal features in transient-absorption measurements. In both our experiments and calculations, we identify the two major contributions of the initial response with distinct signatures: short-lived highly non-thermal excited carriers and longer-lived thermalizing carriers. △ Less

Submitted 24 December, 2016; v1 submitted 10 August, 2016; originally announced August 2016.

Comments: Supplementary information available as SI.pdf in source

Journal ref: Phys. Rev. Lett. 118, 087401 (2017)

Optical Magnetism in Planar Metamaterial Heterostructures

Authors: Georgia T. Papadakis, Dagny Fleischman, Artur Davoyan, Pochi Yeh, Harry A. Atwater

Abstract: Harnessing artificial optical magnetism requires rather complex two- and three-dimensional structures, examples include split-ring and fishnet metamaterials and nanoparticles with non-trivial magnetic properties. By contrast, dielectric properties can be tailored even in planar and pattern-free, one-dimensional (1D) arrangements, for example metal/dielectric multilayer metamaterials. These systems… ▽ More Harnessing artificial optical magnetism requires rather complex two- and three-dimensional structures, examples include split-ring and fishnet metamaterials and nanoparticles with non-trivial magnetic properties. By contrast, dielectric properties can be tailored even in planar and pattern-free, one-dimensional (1D) arrangements, for example metal/dielectric multilayer metamaterials. These systems are extensively investigated due to their hyperbolic and plasmonic response, which, however, is considered to be limited to TM polarization, based on the general consensus that they do not possess interesting magnetic properties. In this work, we tackle these two seemingly unrelated issues simultaneously, by proposing conceptually and demonstrating experimentally a mechanism for artificial magnetism in planar, 1D metamaterials. We show experimentally that the magnetic response of metal/high-index dielectric hyperbolic metamaterials can be anisotropic, leading to frequency regimes of magnetic hyperbolic dispersion. We investigate the implications of our results for TE polarization and show that such systems can support TE interface-bound states, analogous to their TM counterparts, surface plasmon polaritons. Our results simplify the structural complexity for tailoring artificial magnetism in lithography-free systems and generalize the concept of plasmonic and hyperbolic properties to encompass both TE and TM polarizations at optical frequencies. △ Less

Submitted 5 May, 2017; v1 submitted 9 August, 2016; originally announced August 2016.

Comments: 9 pages, 6 figures

Millivolt modulation of plasmonic metasurface via ionic conductance

Authors: Krishnan Thyagarajan, Ruzan Sokhoyan, Leo Zornberg, Harry Atwater

Abstract: We report here and experimentally demonstrate an actively controlled gatetunable plasmonic metasurface operating in the visible region of the electromagnetic spectrum, where strikingly the operating voltages for reflectance modulation are much less than 1V. The electrically tunable metasurface consists of inverse dolmen structures (iDolmen) patterned on silver and chromium on a quartz substrate an… ▽ More We report here and experimentally demonstrate an actively controlled gatetunable plasmonic metasurface operating in the visible region of the electromagnetic spectrum, where strikingly the operating voltages for reflectance modulation are much less than 1V. The electrically tunable metasurface consists of inverse dolmen structures (iDolmen) patterned on silver and chromium on a quartz substrate and subsequently covered with a 5 nm thin layer of Al2O3 followed by a 110 nm indium tin oxide (ITO) layer, which acts as a transparent electrode. Our designed structures show up to 78 percent change in reflection upon applying small voltages (less than 1V). We explain this behaviour via ion conductance of silver through Al2O3 and ITO, leading to active resistive switching. Interesting complementary effects such as decreased reflection in the same structures over a broadband of wavelengths is also seen on reversing the applied bias. The results provide an insight into the use of the resistive switching for electrical control over light-matter interaction in plasmonic metasurfaces. △ Less

Submitted 12 July, 2016; originally announced July 2016.

Resonant Thermoelectric Nanophotonics

Authors: Kelly W. Mauser, Slobodan Mitrovic, Seyoon Kim, Dagny Fleischman, Harry A. Atwater

Abstract: Photodetectors are typically based on photocurrent generation from electron-hole pairs in semiconductor structures and on bolometry for wavelengths that are below bandgap absorption. In both cases, resonant plasmonic and nanophotonic structures have been successfully used to enhance performance. In this work, we demonstrate subwavelength thermoelectric nanostructures designed for resonant spectral… ▽ More Photodetectors are typically based on photocurrent generation from electron-hole pairs in semiconductor structures and on bolometry for wavelengths that are below bandgap absorption. In both cases, resonant plasmonic and nanophotonic structures have been successfully used to enhance performance. In this work, we demonstrate subwavelength thermoelectric nanostructures designed for resonant spectrally selective absorption, which creates large enough localized temperature gradients to generate easily measureable thermoelectric voltages. We show that such structures are tunable and are capable of highly wavelength specific detection, with an input power responsivity of up to 119 V/W (referenced to incident illumination), and response times of nearly 3 kHz, by combining resonant absorption and thermoelectric junctions within a single structure, yielding a bandgap-independent photodetection mechanism. We report results for both resonant nanophotonic bismuth telluride-antimony telluride structures and chromel-alumel structures as examples of a broad class of nanophotonic thermoelectric structures useful for fast, low-cost and robust optoelectronic applications such as non-bandgap-limited hyperspectral and broad-band photodetectors. △ Less

Submitted 10 June, 2016; originally announced June 2016.

Three-dimensional single gyroid photonic crystals with a mid-infrared bandgap

Authors: Siying Peng, Runyu Zhang, Valerian H. Chen, Emil T. Khabiboulline, Paul Braun, Harry A. Atwater

Abstract: A gyroid structure is a distinct morphology that is triply periodic and consists of minimal isosurfaces containing no straight lines. We have designed and synthesized amorphous silicon (a-Si) mid-infrared gyroid photonic crystals that exhibit a complete bandgap in infrared spectroscopy measurements. Photonic crystals were synthesized by deposition of a-Si/Al2O3 coatings onto a sacrificial polymer… ▽ More A gyroid structure is a distinct morphology that is triply periodic and consists of minimal isosurfaces containing no straight lines. We have designed and synthesized amorphous silicon (a-Si) mid-infrared gyroid photonic crystals that exhibit a complete bandgap in infrared spectroscopy measurements. Photonic crystals were synthesized by deposition of a-Si/Al2O3 coatings onto a sacrificial polymer scaffold defined by two-photon lithography. We observed a 100% reflectance at 7.5 \mum for single gyroids with a unit cell size of 4.5 \mum, in agreement with the photonic bandgap position predicted from full-wave electromagnetic simulations, whereas the observed reflection peak shifted to 8 um for a 5.5 \mum unit cell size. This approach represents a simulation-fabrication-characterization platform to realize three-dimensional gyroid photonic crystals with well-defined dimensions in real space and tailored properties in momentum space. △ Less

Submitted 13 April, 2016; originally announced April 2016.

Ab initio phonon coupling and optical response of hot electrons in plasmonic metals

Authors: Ana M. Brown, Ravishankar Sundararaman, Prineha Narang, William A. Goddard III, Harry A. Atwater

Abstract: Ultrafast laser measurements probe the non-equilibrium dynamics of excited electrons in metals with increasing temporal resolution. Electronic structure calculations can provide a detailed microscopic understanding of hot electron dynamics, but a parameter-free description of pump-probe measurements has not yet been possible, despite intensive research, because of the phenomenological treatment of… ▽ More Ultrafast laser measurements probe the non-equilibrium dynamics of excited electrons in metals with increasing temporal resolution. Electronic structure calculations can provide a detailed microscopic understanding of hot electron dynamics, but a parameter-free description of pump-probe measurements has not yet been possible, despite intensive research, because of the phenomenological treatment of electron-phonon interactions. We present ab initio predictions of the electron-temperature dependent heat capacities and electron-phonon coupling coefficients of plasmonic metals. We find substantial differences from free-electron and semi-empirical estimates, especially in noble metals above transient electron temperatures of 2000 K, because of the previously-neglected strong dependence of electron-phonon matrix elements on electron energy. We also present first-principles calculations of the electron-temperature dependent dielectric response of hot electrons in plasmonic metals, including direct interband and phonon-assisted intraband transitions, facilitating complete theoretical predictions of the time-resolved optical probe signatures in ultrafast laser experiments. △ Less

Submitted 28 July, 2016; v1 submitted 1 February, 2016; originally announced February 2016.

Comments: 10 pages with 12 figures. SI includes tabulation of temperature and frequency dependent dielectric functions

Journal ref: Phys. Rev. B 94, 075120 (2016)

Omnidirectional and broadband absorption enhancement from trapezoidal Mie resonators in semiconductor metasurfaces

Authors: Ragip A. Pala, Serkan Butun, Koray Aydin, Harry A. Atwater

Abstract: Light trap** in planar ultrathin-film solar cells is limited due to a small number of optical modes available in the thin-film slab. A nanostructured thin-film design could surpass this limit by providing broadband increase in the local density of states in a subwavelength volume and maintaining efficient coupling of light. Here we report a broadband metasurface design, enabling efficient and br… ▽ More Light trap** in planar ultrathin-film solar cells is limited due to a small number of optical modes available in the thin-film slab. A nanostructured thin-film design could surpass this limit by providing broadband increase in the local density of states in a subwavelength volume and maintaining efficient coupling of light. Here we report a broadband metasurface design, enabling efficient and broadband absorption enhancement by direct coupling of incoming light to resonant modes of subwavelength-scale Mie nanoresonators defined in the thin-film active layer. Absorption was investigated both theoretically and experimentally in prototypes consisting of lithographically patterned, two-dimensional periodic arrays of silicon nanoresonators on silica substrates. A crossed trapezoid resonator shape of rectangular cross section is used to excite broadband Mie resonances across the visible and near-IR spectra. Our numerical simulations, optical absorption measurements and photocurrent spectral response measurements demonstrate that crossed trapezoidal Mie resonant structures enable angle-insensitive, broadband absorption. A short circuit current density of 12.0 mA/cm2 is achieved in 210 nm thick patterned Si films, yielding a 4-fold increase compared to planar films of the same thickness. It is suggested that silicon metasurfaces with Mie resonator arrays can provide useful insights to guide future ultrathin-film solar cell designs incorporating nanostructured thin active layers. △ Less

Submitted 15 December, 2015; v1 submitted 14 December, 2015; originally announced December 2015.

Comments: 15 pages, 5 figures

Journal ref: Scientific Reports 6, Article number: 31451 (2016)

Gate-tunable conducting oxide metasurfaces

Authors: Yao-Wei Huang, Ho Wai Howard Lee, Ruzan Sokhoyan, Ragip Pala, Krishnan Thyagarajan, Seunghoon Han, Din ** Tsai, Harry A. Atwater

Abstract: Metasurfaces composed of planar arrays of sub-wavelength artificial structures show promise for extraordinary light manipulation; they have yielded novel ultrathin optical components such as flat lenses, wave plates, holographic surfaces and orbital angular momentum manipulation and detection over a broad range of electromagnetic spectrum. However the optical properties of metasurfaces developed t… ▽ More Metasurfaces composed of planar arrays of sub-wavelength artificial structures show promise for extraordinary light manipulation; they have yielded novel ultrathin optical components such as flat lenses, wave plates, holographic surfaces and orbital angular momentum manipulation and detection over a broad range of electromagnetic spectrum. However the optical properties of metasurfaces developed to date do not allow for versatile tunability of reflected or transmitted wave amplitude and phase after fabrication, thus limiting their use in a wide range of applications. Here, we experimentally demonstrate a gate-tunable metasurface that enables dynamic electrical control of the phase and amplitude of the plane wave reflected from the metasurface. Tunability arises from field-effect modulation of the complex refractive index of conducting oxide layers incorporated into metasurface antenna elements which are configured in a reflectarray geometry. We measure a phase shift of π and ~ 30% change in the reflectance by applying 2.5 V gate bias. Additionally, we demonstrate modulation at frequencies exceeding 10 MHz, and electrical switching of +/-1 order diffracted beams by electrical control over subgroups of metasurface elements, a basic requirement for electrically tunable beam-steering phased array metasurfaces. The proposed tunable metasurface design with high optical quality and high speed dynamic phase modulation suggests applications in next generation ultrathin optical components for imaging and sensing technologies, such as reconfigurable beam steering devices, dynamic holograms, tunable ultrathin lens, nano-projectors, and nanoscale spatial light modulators. Importantly, our design allows complete integration with electronics and hence electrical addressability of individual metasurface elements. △ Less

Submitted 26 November, 2015; originally announced November 2015.

Comments: 13 pages, 4 figures

Cooperative behavior of quantum dipole emitters coupled to a zero-index nanoscale waveguide

Authors: Ruzan Sokhoyan, Harry A. Atwater

Abstract: We study cooperative behavior of quantum dipole emitters coupled to a rectangular waveguide with dielectric core and silver cladding. We investigate cooperative emission and inter-emitter entanglement generation phenomena for emitters whose resonant frequencies are near the frequency cutoff of the waveguide, where the waveguide effectively behaves as zero-index metamaterial. We show that coupling… ▽ More We study cooperative behavior of quantum dipole emitters coupled to a rectangular waveguide with dielectric core and silver cladding. We investigate cooperative emission and inter-emitter entanglement generation phenomena for emitters whose resonant frequencies are near the frequency cutoff of the waveguide, where the waveguide effectively behaves as zero-index metamaterial. We show that coupling emitters to a zero-index waveguide allows one to relax the constraint on precision positioning of emitters for observing inter-emitter entanglement generation and extend the spatial scale at which the superradiance can be observed. △ Less

Submitted 23 October, 2015; originally announced October 2015.

Field-effect induced tunability in planar hyperbolic metamaterials

Authors: Georgia T. Papadakis, Harry A. Atwater

Abstract: We demonstrate that use of the field effect to tune the effective optical parameters of a layered hyperbolic metamaterial leads to topological transitions in its dispersion characteristics in the optical regime. Field effect gating electrically modulates the permittivity in transparent conductive oxides via changes in the carrier density. These permittivity changes lead to active extreme modulatio… ▽ More We demonstrate that use of the field effect to tune the effective optical parameters of a layered hyperbolic metamaterial leads to topological transitions in its dispersion characteristics in the optical regime. Field effect gating electrically modulates the permittivity in transparent conductive oxides via changes in the carrier density. These permittivity changes lead to active extreme modulation of ~200% of the effective electromagnetic parameters along with active control of the anisotropic dispersion surface of hyperbolic metamaterials and enable the opening and closing of photonic band gaps. △ Less

Submitted 23 July, 2015; originally announced July 2015.

Journal ref: Phys. Rev. B 92, 184101 (2015)

Functional plasmonic nano-circuits with low insertion and propagation losses

Authors: Arian Kriesch, Stanley P. Burgos, Daniel Ploss, Hannes Pfeifer, Harry A. Atwater, Ulf Peschel

Abstract: We experimentally demonstrate plasmonic nano-circuits operating as sub-diffraction directional couplers optically excited with high efficiency from free-space using optical Yagi-Uda style antennas at λ= 1550 nm. The optical Yagi-Uda style antennas are designed to feed channel plasmon waveguides with high efficiency (45 % in coupling, 60 % total emission), narrow angular directivity (< 40°) and low… ▽ More We experimentally demonstrate plasmonic nano-circuits operating as sub-diffraction directional couplers optically excited with high efficiency from free-space using optical Yagi-Uda style antennas at λ= 1550 nm. The optical Yagi-Uda style antennas are designed to feed channel plasmon waveguides with high efficiency (45 % in coupling, 60 % total emission), narrow angular directivity (< 40°) and low insertion loss. SPP gap waveguides exhibit propagation lengths as large as 34 μm with adiabatically tuned confinement, and are integrated with ultra-compact (5 μm x 10 μm), highly dispersive directional couplers, which enable 30 dB discrimination over Δλ = 200 nm with only 0.3 dB device loss. △ Less

Submitted 14 August, 2013; originally announced August 2013.

Comments: 10 pages, 7 figures, additional supplementary information available

Journal ref: NanoLett. 13 (2013) 4539-4545

The plasmoelectric effect: optically induced electrochemical potentials in resonant metallic structures

Authors: Matthew T. Sheldon, Harry A. Atwater

Abstract: We describe a strategy for conversion of optical power into DC electrical power using resonant absorption in plasmonic nanostructures. A thermodynamic analysis of the underlying mechanism motivates our description of the phenomenon, which we term the plasmoelectric effect. Power conversion results from the dependence of optically generated heat on shifts of the plasmon resonance frequency that occ… ▽ More We describe a strategy for conversion of optical power into DC electrical power using resonant absorption in plasmonic nanostructures. A thermodynamic analysis of the underlying mechanism motivates our description of the phenomenon, which we term the plasmoelectric effect. Power conversion results from the dependence of optically generated heat on shifts of the plasmon resonance frequency that occur with changes of electron density. We model an all-metal device constructed from 10 nm radius silver spheres and predict a characteristic conversion efficiency of 14.3% under 1 kW m-2 intensity, single-frequency radiation. We discuss strategies for enhanced efficiency, broadband power conversion, and further applications of this new class of optoelectronic device. △ Less

Submitted 1 February, 2012; originally announced February 2012.

Comments: 24 pages with supplemental included

Resonant guided wave networks

Authors: Eyal Feigenbaum, Harry A. Atwater

Abstract: A resonant guided wave network (RGWN) is an approach to optical materials design in which power propagation in guided wave circuits enables material dispersion. The RGWN design, which consists of power-splitting elements arranged at the nodes of a waveguide network, results in wave dispersion which depends on network layout due to localized resonances at several length scales in the network. The… ▽ More A resonant guided wave network (RGWN) is an approach to optical materials design in which power propagation in guided wave circuits enables material dispersion. The RGWN design, which consists of power-splitting elements arranged at the nodes of a waveguide network, results in wave dispersion which depends on network layout due to localized resonances at several length scales in the network. These structures exhibit both localized resonances with Q ~ 80 at 1550 nm wavelength as well as photonic bands and band-gaps in large periodic networks at infrared wavelengths. △ Less

Submitted 8 November, 2009; originally announced November 2009.

Comments: 9 pages, 5 figures

Origin of undesirable cracks during layer transfer

Authors: Laurent Ponson, Kenneth Diest, Harry Atwater, Guruswami Ravichandran, Kaushik Bhattacharya

Abstract: We investigate the origin of undesirable transverse cracks often observed in thin films obtained by the layer transfer technique. During this process, two crystals bonded to each other containing a weak plan produced by ion implantation are heated to let a thin layer of one of the material on the other. The level of stress imposed on the film during the heating phase due to the mismatch of therm… ▽ More We investigate the origin of undesirable transverse cracks often observed in thin films obtained by the layer transfer technique. During this process, two crystals bonded to each other containing a weak plan produced by ion implantation are heated to let a thin layer of one of the material on the other. The level of stress imposed on the film during the heating phase due to the mismatch of thermal expansion coefficients of the substrate and the film is shown to be the relevant parameter of the problem. In particular, it is shown that if the film is submitted to a tensile stress, the microcracks produced by ion implantation are not stable and deviate from their straight trajectory making the layer transfer process impossible. However, if the compressive stress exceeds a threshold value, after layer transfer, the film can buckle and delaminate, leading to transverse cracks induced by bending. As a result, we show that the imposed stress σ_m - or equivalently the heating temperature - must be within the range -σ_c < σ_m < 0 to produce an intact thin film where σ_c depends on the interfacial fracture energy and the size of defects at the interface between film and substrate. △ Less

Submitted 28 October, 2008; originally announced October 2008.

Comments: 26 pages