Showing 1–50 of 259 results for author: Atsushi

Imaging reconstruction method on X-ray data of CMOS polarimeter combined with coded aperture

Authors: Tsubasa Tamba, Hirokazu Odaka, Taihei Watanabe, Toshiya Iwata, Tomoaki Kasuga, Atsushi Tanimoto, Satoshi Takashima, Masahiro Ichihashi, Hiromasa Suzuki, Aya Bamba

Abstract: X-ray polarization is a powerful tool for unveiling the anisotropic characteristics of high-energy celestial objects. We present a novel imaging reconstruction method designed for hard X-ray polarimeters employing a Si CMOS sensor and coded apertures, which function as a photoelectron tracker and imaging optics, respectively. Faced with challenges posed by substantial artifacts and background nois… ▽ More X-ray polarization is a powerful tool for unveiling the anisotropic characteristics of high-energy celestial objects. We present a novel imaging reconstruction method designed for hard X-ray polarimeters employing a Si CMOS sensor and coded apertures, which function as a photoelectron tracker and imaging optics, respectively. Faced with challenges posed by substantial artifacts and background noise in the coded aperture imaging associated with the conventional balanced correlation method, we adopt the Expectation-Maximization (EM) algorithm as the foundation of our imaging reconstruction method. The newly developed imaging reconstruction method is validated with imaging polarimetry and a series of X-ray beam experiments. The method demonstrates the capability to accurately reproduce an extended source comprising multiple segments with distinct polarization degrees. Comparative analysis exhibits a significant enhancement in imaging reconstruction accuracy compared to the balanced correlation method, with the background noise levels reduced to 17%. The outcomes of this study enhance the feasibility of Cube-Sat imaging polarimetry missions in the hard X-ray band, as the combination of Si CMOS sensors and coded apertures is a promising approach for realizing it. △ Less

Submitted 7 July, 2024; originally announced July 2024.

Comments: 12 pages, 5 figures, 1 table, accepted for publication in NIM-A

Time-Dependent Density Functional Theory Simulation for Analyzing Neutralization Process of Hydrogen Ion Injected onto Tungsten Surfaces

Authors: Yuto Toda, Arimichi Takayama, Atsushi M. Ito

Abstract: We have performed time-dependent density functional theory simulations for the neutralization process of a hydrogen ion injected at 100eV onto the (110) surface of tungsten material. We have also proposed a method for evaluating the detection probability of electrons in a small region. This probability is interpreted as that of detecting hydrogen in each state: positive ion, neutral atom, and nega… ▽ More We have performed time-dependent density functional theory simulations for the neutralization process of a hydrogen ion injected at 100eV onto the (110) surface of tungsten material. We have also proposed a method for evaluating the detection probability of electrons in a small region. This probability is interpreted as that of detecting hydrogen in each state: positive ion, neutral atom, and negative ion. As a result, the probabilities of detecting hydrogen after a collision as a positive ion, neutral atom, and negative ion were approximately 30 percent, 50 percent, and 20 percent, respectively. △ Less

Submitted 3 July, 2024; originally announced July 2024.

Comments: 10 pages, 6 figures, 1 table, 26-th International Conference on Plasma Surface Interaction

Quantum Electron Dynamics in Helium Ion Injection onto Tungsten Surfaces by Time-Dependent Density Functional Theory

Authors: Atsushi M. Ito, Yuto Toda, Arimichi Takayama

Abstract: The neutralization process of an ion particle on a surface is key issue of the plasma-wall interaction (PWI). We investigated helium (He) ion injection onto a tungsten surface using time-dependent density functional theory (TDDFT) simulation. We developed the TDDFT code QUMASUN for this study, simulating the process of electron transfer from the surface to the He nucleus by solving the time evolut… ▽ More The neutralization process of an ion particle on a surface is key issue of the plasma-wall interaction (PWI). We investigated helium (He) ion injection onto a tungsten surface using time-dependent density functional theory (TDDFT) simulation. We developed the TDDFT code QUMASUN for this study, simulating the process of electron transfer from the surface to the He nucleus by solving the time evolution of electron wave function and the classical motion of nuclei simultaneously. Our results show that the probabilities of injected $\text{He}^{2+}$ changing into $\text{He}^{1+}$ and $\text{He}^{0}$ on the surface are approximately 40 percent and 13 percent, respectively. The captured electrons by $\text{He}^{1+}$ and $\text{He}^{0}$ predominantly occupy the 2s and 2p orbitals, corresponding to excited states. In addition, we stated some challenges for applying TDDFT to plasma-wall interactions. △ Less

Submitted 2 July, 2024; originally announced July 2024.

Comments: 4 figures, 1 table, resented in 26th International conference on plasma-surface interaction

Sensitivities of Free-Air RANS and DDES Methods on the High-Lift NASA CRM

Authors: Markus Zauner, Andrea Sansica, Tomoaki Matsuzaki, David James Lusher, Atsushi Hashimoto

Abstract: To reduce the time-to-market of future aircraft, it is crucial to predict the flight envelope accurately before building prototypes for flight tests. The High-Lift Prediction Workshop (HLPW) series aims to assess the numerical prediction capability of current CFD technology considering NASA's high-lift version of the Common Research Model (CRM-HL). The present work contributes to these collaborati… ▽ More To reduce the time-to-market of future aircraft, it is crucial to predict the flight envelope accurately before building prototypes for flight tests. The High-Lift Prediction Workshop (HLPW) series aims to assess the numerical prediction capability of current CFD technology considering NASA's high-lift version of the Common Research Model (CRM-HL). The present work contributes to these collaborative efforts, quantifying sensitivities for RANS-based steady, unsteady, and hybrid RANS/LES scale-resolving approaches. Uncertainties associated with the choice of turbulence model, initialization strategies, grid resolution, and iterative convergence at free-air conditions are covered. Near stall, a large spread of RANS results was observed for different turbulence models and initialization strategies, while iterative convergence appeared less crucial for the present simulations. Steady and unsteady RANS simulations were unable to predict the correct flow physics near CLmax, even for large grids. Delayed Detached Eddy Simulations (DDES), however, showed good accuracy compared with wind-tunnel experiments and predicted CLmax with an error of around 5%. Compared to steady RANS, the computational cost of DDES was a factor of ten higher. Lessons learned and potential best-practice strategies are shared to aid future studies. While warm-started RANS simulations using SA models are recommended at lower angles of attack, scale-resolving methods are required near stall. △ Less

Submitted 14 June, 2024; originally announced June 2024.

High-fidelity study of three-dimensional turbulent transonic buffet on wide-span infinite wings

Authors: David J. Lusher, Andrea Sansica, Markus Zauner, Atsushi Hashimoto

Abstract: Turbulent transonic buffet is an aerodynamic instability causing periodic oscillations of lift/drag in aerospace applications. Involving complex coupling between inviscid and viscous effects, buffet is characterised by shock-wave oscillations and flow separation/reattachment. Previous studies have identified both 2D chordwise shock-oscillation and 3D buffet/stall-cell modes. While the 2D instabili… ▽ More Turbulent transonic buffet is an aerodynamic instability causing periodic oscillations of lift/drag in aerospace applications. Involving complex coupling between inviscid and viscous effects, buffet is characterised by shock-wave oscillations and flow separation/reattachment. Previous studies have identified both 2D chordwise shock-oscillation and 3D buffet/stall-cell modes. While the 2D instability has been studied extensively, investigations of 3D buffet have been limited to only low-fidelity simulations or experiments. Due to computational costs, almost all high-fidelity studies to date have been limited to narrow span-widths around 5% of aerofoil chord length (aspect ratio, $AR = 0.05$), which is insufficiently wide to observe large-scale three-dimensionality. In this work, high-fidelity simulations are performed up to $AR=3$, on infinite unswept NASA-CRM wing profiles at $Re=5\times 10^{5}$. At $AR \geq 1$, intermittent 3D separation bubbles are observed at buffet conditions. While previous RANS/stability-based studies predict simultaneous onset of 2D- and 3D-buffet, a case with buffet that remains essentially-2D despite span-widths up to $AR=2$ is identified here. Strongest three-dimensionality was observed near the low-lift phases of the buffet cycle at maximum flow separation, reverting to essentially-2D behaviour during high-lift phases. Buffet was found to become three-dimensional when extensive mean flow separation was present. At $AR \geq 2$, multiple 3D separation bubbles form, in a wavelength range of $λ=\left[1c-1.5c\right]$. SPOD and cross-correlations were applied to analyse the spatio/temporal structure of 3D buffet-cells. In addition to the 2D chordwise shock-oscillation mode (Strouhal number $St \approx 0.07-0.1$), 3D modal structures were found in the shocked region of the flow at $St \approx 0.002-0.004$. △ Less

Submitted 3 June, 2024; originally announced June 2024.

Convex Optimization of Initial Perturbations toward Quantitative Weather Control

Authors: Toshiyuki Ohtsuka, Atsushi Okazaki, Masaki Ogura, Shunji Kotsuki

Abstract: This study proposes introducing convex optimization to find initial perturbations of atmospheric models for realizing specified changes in subsequent forecasts. In the proposed method, we formulate and solve an inverse problem to find effective perturbations in atmospheric variables so that controlled variables satisfy specified changes at a specified time. The proposed method first constructs a s… ▽ More This study proposes introducing convex optimization to find initial perturbations of atmospheric models for realizing specified changes in subsequent forecasts. In the proposed method, we formulate and solve an inverse problem to find effective perturbations in atmospheric variables so that controlled variables satisfy specified changes at a specified time. The proposed method first constructs a sensitivity matrix of controlled variables, such as accumulated precipitation, to the initial atmospheric variables, such as temperature and humidity, through sensitivity analysis using numerical weather prediction (NWP) models. The sensitivity matrix is used to solve the inverse problem as convex optimization, in which a global optimal solution can be found computationally efficiently. The proposed method was validated through a benchmark warm bubble experiment using an NWP model. The experiments showed that identified perturbation successfully realized specified spatial distributions of accumulated precipitation. These results demonstrated the possibility of controlling the real atmosphere by solving inverse problems and adding small perturbations to atmospheric states. △ Less

Submitted 28 June, 2024; v1 submitted 29 May, 2024; originally announced May 2024.

Comments: license changed to CC BY 4.0; revised to improve readability; some figures in Appendix omitted to improve conciseness

Controlling $^{229}$Th isomeric state population in a VUV transparent crystal

Authors: Takahiro Hiraki, Koichi Okai, Michael Bartokos, Kjeld Beeks, Hiroyuki Fujimoto, Yuta Fukunaga, Hiromitsu Haba, Yoshitaka Kasamatsu, Shinji Kitao, Adrian Leitner, Takahiko Masuda, Guan Ming, Nobumoto Nagasawa, Ryoichiro Ogake, Martin Pimon, Martin Pressler, Noboru Sasao, Fabian Schaden, Thorsten Schumm, Makoto Seto, Yudai Shigekawa, Koutaro Shimizu, Tomas Sikorsky, Kenji Tamasaku, Sayuri Takatori , et al. (5 additional authors not shown)

Abstract: The radioisotope Th-229 is renowned for its extraordinarily low-energy, long-lived nuclear first-excited state. This isomeric state can be excited by VUV lasers and the transition from the ground state has been proposed as a reference transition for ultra-precise nuclear clocks. Such nuclear clocks will find multiple applications, ranging from fundamental physics studies to practical implementatio… ▽ More The radioisotope Th-229 is renowned for its extraordinarily low-energy, long-lived nuclear first-excited state. This isomeric state can be excited by VUV lasers and the transition from the ground state has been proposed as a reference transition for ultra-precise nuclear clocks. Such nuclear clocks will find multiple applications, ranging from fundamental physics studies to practical implementations. Recent investigations extracted valuable constraints on the nuclear transition energy and lifetime, populating the isomer in stochastic nuclear decay of U-233 or Ac-229. However, to assess the feasibility and performance of the (solid-state) nuclear clock concept, time-controlled excitation and depopulation of the $^{229}$Th isomer together with time-resolved monitoring of the radiative decay are imperative. Here we report the population of the $^{229}$Th isomeric state through resonant X-ray pum** and detection of the radiative decay in a VUV transparent $^{229}$Th-doped CaF$_2$ crystal. The decay half-life is measured to $447\pm 25$ s, with a transition wavelength of $148.18 \pm 0.42$ nm and a radiative decay fraction consistent with unity. Furthermore, we report a new ``X-ray quenching'' effect which allows to de-populate the isomer on demand and effectively reduce the half-life by at least a factor 50. Such controlled quenching can be used to significantly speed up the interrogation cycle in future nuclear clock schemes. Our results show that full control over the $^{229}$Th nuclear isomer population can be achieved in a crystal environment. In particular, non-radiative decay processes that might lead to a broadening of the isomer transition linewidth are negligible, paving the way for the development of a compact and robust solid-state nuclear clock. Further studies are needed to reveal the underlying physical mechanism of the X-ray quenching effect. △ Less

Submitted 14 May, 2024; originally announced May 2024.

Comments: 14 pages with 8 figures and 2 tables

Does there exist the applicability limit of PDE to describe physical phenomena? -- A personal survey of Quantization, QED, Turbulence

Authors: Atsushi Inoue

Abstract: What does it mean to study PDE(=Partial Differential Equation)? How and what to do "to claim proudly that I'm studying a certain PDE"? Newton mechanic uses mainly ODE(=Ordinary Differential Equation) and describes nicely movements of Sun, Moon and Earth etc. Now, so-called quantum phenomenum is described by, say Schrödinger equation, PDE which explains both wave and particle characters after quant… ▽ More What does it mean to study PDE(=Partial Differential Equation)? How and what to do "to claim proudly that I'm studying a certain PDE"? Newton mechanic uses mainly ODE(=Ordinary Differential Equation) and describes nicely movements of Sun, Moon and Earth etc. Now, so-called quantum phenomenum is described by, say Schrödinger equation, PDE which explains both wave and particle characters after quantization of ODE. The coupled Maxwell-Dirac equation is also "quantized" and QED(=Quantum Electro-Dynamics) theory is invented by physicists. Though it is said this QED gives very good coincidence between theoretical and experimental observed quantities, but what is the equation corresponding to QED? Or, is it possible to describe QED by "equation" in naive sense? △ Less

Submitted 7 June, 2024; v1 submitted 9 April, 2024; originally announced May 2024.

Comments: 27pages

MSC Class: 35; 42; 46; 76

Combined Pre-Supernova Alert System with Kamland and Super-Kamiokande

Authors: KamLAND, Super-Kamiokande Collaborations, :, Seisho Abe, Minori Eizuka, Sawako Futagi, Azusa Gando, Yoshihito Gando, Shun Goto, Takahiko Hachiya, Kazumi Hata, Koichi Ichimura, Sei Ieki, Haruo Ikeda, Kunio Inoue, Koji Ishidoshiro, Yuto Kamei, Nanami Kawada, Yasuhiro Kishimoto, Masayuki Koga, Maho Kurasawa, Tadao Mitsui, Haruhiko Miyake, Daisuke Morita, Takeshi Nakahata , et al. (290 additional authors not shown)

Abstract: Preceding a core-collapse supernova, various processes produce an increasing amount of neutrinos of all flavors characterized by mounting energies from the interior of massive stars. Among them, the electron antineutrinos are potentially detectable by terrestrial neutrino experiments such as KamLAND and Super-Kamiokande via inverse beta decay interactions. Once these pre-supernova neutrinos are ob… ▽ More Preceding a core-collapse supernova, various processes produce an increasing amount of neutrinos of all flavors characterized by mounting energies from the interior of massive stars. Among them, the electron antineutrinos are potentially detectable by terrestrial neutrino experiments such as KamLAND and Super-Kamiokande via inverse beta decay interactions. Once these pre-supernova neutrinos are observed, an early warning of the upcoming core-collapse supernova can be provided. In light of this, KamLAND and Super-Kamiokande, both located in the Kamioka mine in Japan, have been monitoring pre-supernova neutrinos since 2015 and 2021, respectively. Recently, we performed a joint study between KamLAND and Super-Kamiokande on pre-supernova neutrino detection. A pre-supernova alert system combining the KamLAND detector and the Super-Kamiokande detector was developed and put into operation, which can provide a supernova alert to the astrophysics community. Fully leveraging the complementary properties of these two detectors, the combined alert is expected to resolve a pre-supernova neutrino signal from a 15 M$_{\odot}$ star within 510 pc of the Earth, at a significance level corresponding to a false alarm rate of no more than 1 per century. For a Betelgeuse-like model with optimistic parameters, it can provide early warnings up to 12 hours in advance. △ Less

Submitted 1 July, 2024; v1 submitted 15 April, 2024; originally announced April 2024.

Comments: Resubmitted to ApJ. 22 pages, 16 figures, for more information about the combined pre-supernova alert system, see https://www.lowbg.org/presnalarm/

Solvable toy model of negative energetic elasticity

Authors: Atsushi Iwaki, Soshun Ozaki

Abstract: Recent experiments have established negative energetic elasticity, the negative contribution of energy to the elastic modulus, as a universal property of polymer gels. To reveal the microscopic origin of this phenomenon, Shirai and Sakumichi investigated a polymer model on a cubic lattice with the energy effect from the solvent in finite-size calculations [Phys. Rev. Lett. 130, 148101 (2023)]. Mot… ▽ More Recent experiments have established negative energetic elasticity, the negative contribution of energy to the elastic modulus, as a universal property of polymer gels. To reveal the microscopic origin of this phenomenon, Shirai and Sakumichi investigated a polymer model on a cubic lattice with the energy effect from the solvent in finite-size calculations [Phys. Rev. Lett. 130, 148101 (2023)]. Motivated by this work, we provide a simple platform to study the elasticity of polymer chains by considering a one-dimensional random walk with the energy effect. This model can be mapped onto the classical Ising chain, leading to an exact form of the free energy in the thermodynamic or continuous limit. Our analytical results are qualitatively consistent with Shirai and Sakumichi's work. Our model serves as a fundamental benchmark for studying negative energetic elasticity. △ Less

Submitted 10 April, 2024; originally announced April 2024.

Comments: 6 pages, 4 figures

Automated Report Generation for Lung Cytological Images Using a CNN Vision Classifier and Multiple-Transformer Text Decoders: Preliminary Study

Authors: Atsushi Teramoto, Ayano Michiba, Yuka Kiriyama, Tetsuya Tsukamoto, Kazuyoshi Imaizumi, Hiroshi Fujita

Abstract: Cytology plays a crucial role in lung cancer diagnosis. Pulmonary cytology involves cell morphological characterization in the specimen and reporting the corresponding findings, which are extremely burdensome tasks. In this study, we propose a report-generation technique for lung cytology images. In total, 71 benign and 135 malignant pulmonary cytology specimens were collected. Patch images were e… ▽ More Cytology plays a crucial role in lung cancer diagnosis. Pulmonary cytology involves cell morphological characterization in the specimen and reporting the corresponding findings, which are extremely burdensome tasks. In this study, we propose a report-generation technique for lung cytology images. In total, 71 benign and 135 malignant pulmonary cytology specimens were collected. Patch images were extracted from the captured specimen images, and the findings were assigned to each image as a dataset for report generation. The proposed method consists of a vision model and a text decoder. In the former, a convolutional neural network (CNN) is used to classify a given image as benign or malignant, and the features related to the image are extracted from the intermediate layer. Independent text decoders for benign and malignant cells are prepared for text generation, and the text decoder switches according to the CNN classification results. The text decoder is configured using a Transformer that uses the features obtained from the CNN for report generation. Based on the evaluation results, the sensitivity and specificity were 100% and 96.4%, respectively, for automated benign and malignant case classification, and the saliency map indicated characteristic benign and malignant areas. The grammar and style of the generated texts were confirmed as correct and in better agreement with gold standard compared to existing LLM-based image-captioning methods and single-text-decoder ablation model. These results indicate that the proposed method is useful for pulmonary cytology classification and reporting. △ Less

Submitted 26 March, 2024; originally announced March 2024.

Comments: This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible

Development of a low-background micro pixel chamber for directional dark matter searches

Authors: Ryota Namai, Satoshi Higashino, Hirohisa Ishiura, Tomonori Ikeda, Mizuno Ofuji, Ayaka Nakayama, Kiseki Nakamura, Hiroshi Ito, Koichi Ichimura, Ko Abe, Kazuyoshi Kobayashi, Atsushi Takada, Ryo Kubota, Kentaro Miuchi

Abstract: Direct detection of weakly interacting massive particles (WIMPs) can provide strong evidence of their existence and the directional method would have an advantage over other methods to detect the clear signal of WIMPs. Time projection chambers with micro-patterned gaseous detectors (MPGDs) are one of the common devices used in directional WIMP searches. A micro pixel chamber ($μ$-PIC), one of the… ▽ More Direct detection of weakly interacting massive particles (WIMPs) can provide strong evidence of their existence and the directional method would have an advantage over other methods to detect the clear signal of WIMPs. Time projection chambers with micro-patterned gaseous detectors (MPGDs) are one of the common devices used in directional WIMP searches. A micro pixel chamber ($μ$-PIC), one of the various types of MPGDs, with specially selected low background materials (LBG$μ$-PIC) was developed and its performance was studied. The radon emission of the LBG$μ$-PIC was less than 1/60 of that of the $μ$-PIC currently in use. Although a non-negligible gain non-homogeneity was seen for the LBG$μ$-PIC, it can be used for the directional WIMP search with the correction of the non-homogeneity. △ Less

Submitted 18 March, 2024; originally announced March 2024.

Comments: 18 pages, 14 figures, submitted to NIM A

Shadow Hamiltonians of structure-preserving integrators for Nambu mechanics

Authors: Atsushi Horikoshi

Abstract: Symplectic integrators are widely implemented numerical integrators for Hamiltonian mechanics, which preserve the Hamiltonian structure (symplecticity) of the system. Although the symplectic integrator does not conserve the energy of the system, it is well known that there exists a conserving modified Hamiltonian, called the shadow Hamiltonian. For the Nambu mechanics, which is a kind of generaliz… ▽ More Symplectic integrators are widely implemented numerical integrators for Hamiltonian mechanics, which preserve the Hamiltonian structure (symplecticity) of the system. Although the symplectic integrator does not conserve the energy of the system, it is well known that there exists a conserving modified Hamiltonian, called the shadow Hamiltonian. For the Nambu mechanics, which is a kind of generalized Hamiltonian mechanics, we can also construct structure-preserving integrators by the same procedure used to construct the symplectic integrators. In the structure-preserving integrator, however, the existence of shadow Hamiltonians is nontrivial. This is because the Nambu mechanics is driven by multiple Hamiltonians and it is nontrivial whether the time evolution by the integrator can be cast into the Nambu mechanical time evolution driven by multiple shadow Hamiltonians. In this paper we present a general procedure to calculate the shadow Hamiltonians of structure-preserving integrators for Nambu mechanics, and give an example where the shadow Hamiltonians exist. This is the first attempt to determine the concrete forms of the shadow Hamiltonians for a Nambu mechanical system. We show that the fundamental identity, which corresponds to the Jacobi identity in Hamiltonian mechanics, plays an important role in calculating the shadow Hamiltonians using the Baker-Campbell-Hausdorff formula. It turns out that the resulting shadow Hamiltonians have indefinite forms depending on how the fundamental identities are used. This is not a technical artifact, because the exact shadow Hamiltonians obtained independently have the same indefiniteness. △ Less

Submitted 1 June, 2024; v1 submitted 18 March, 2024; originally announced March 2024.

Comments: 14 pages, 4 figures, final version

Journal ref: Prog. Theor. Exp. Phys. 2024, 053A05 (2024)

High-energy extension of the gamma-ray band observable with an electron-tracking Compton camera

Authors: Tomohiko Oka, Shingo Ogio, Mitsuru Abe, Kenji Hamaguchi, Tomonori Ikeda, Hidetoshi Kubo, Shunsuke Kurosawa, Kentaro Miuchi, Yoshitaka Mizumura, Yuta Nakamura, Tatsuya Sawano, Atsushi Takada, Taito Takemura, Toru Tanimori, Kei Yoshikawa

Abstract: Although the MeV gamma-ray band is a promising energy-band window in astrophysics, the current situation of MeV gamma-ray astronomy significantly lags behind those of the other energy bands in angular resolution and sensitivity. An electron-tracking Compton camera (ETCC), a next-generation MeV detector, is expected to revolutionize the situation. An ETCC tracks each Compton-recoil electron with a… ▽ More Although the MeV gamma-ray band is a promising energy-band window in astrophysics, the current situation of MeV gamma-ray astronomy significantly lags behind those of the other energy bands in angular resolution and sensitivity. An electron-tracking Compton camera (ETCC), a next-generation MeV detector, is expected to revolutionize the situation. An ETCC tracks each Compton-recoil electron with a gaseous electron tracker and determines the incoming direction of each gamma-ray photon; thus, it has a strong background rejection power and yields a better angular resolution than classical Compton cameras. Here, we study ETCC events in which the Compton-recoil electrons do not deposit all energies to the electron tracker but escape and hit the surrounding pixel scintillator array (PSA). We developed an analysis method for this untapped class of events and applied it to laboratory and simulation data. We found that the energy spectrum obtained from the simulation agreed with that of the actual data within a factor of 1.2. We then evaluated the detector performance using the simulation data. The angular resolution for the new-class events was found to be twice as good as in the previous study at the energy range 1.0--2.0~MeV, where both analyses overlap. We also found that the total effective area is dominated by the contribution of the double-hit events above an energy of 1.5~MeV. Notably, applying this new method extends the sensitive energy range with the ETCC from 0.2--2.1 MeV in the previous studies to up to 3.5~MeV. Adjusting the PSA dynamic range should improve the sensitivity in even higher energy gamma-rays. The development of this new analysis method would pave the way for future observations by ETCC to fill the MeV-band sensitivity gap in astronomy. △ Less

Submitted 8 March, 2024; originally announced March 2024.

Comments: 11 pages, 8 figures, Accepted for publication in NIM A

Projector-based efficient estimation of force constants

Authors: Atsuto Seko, Atsushi Togo

Abstract: Estimating force constants for crystal structures is a fundamental aspect of calculating various phonon-related properties. However, it can be a challenging task, particularly when dealing with a large number of atoms or when third and higher-order force constants are needed. In this study, we propose an efficient approach that involves constructing a complete orthonormal basis set of the force co… ▽ More Estimating force constants for crystal structures is a fundamental aspect of calculating various phonon-related properties. However, it can be a challenging task, particularly when dealing with a large number of atoms or when third and higher-order force constants are needed. In this study, we propose an efficient approach that involves constructing a complete orthonormal basis set of the force constants. We formulate this approach using projector matrices and their eigenvectors corresponding to the requirements for the force constants. This basis set allows us to infer the force constants from displacement-force datasets precisely. Our efficient algorithms for the basis-set construction and force constant estimation from a displacement-force dataset are implemented in the symfc code. Furthermore, several applications are demonstrated in this study, indicating that the current approach helps to obtain force constants efficiently and precisely. △ Less

Submitted 6 March, 2024; originally announced March 2024.

Comments: 16 pages, 9 figures

Radiation Hardness Studies of RPC Based on Diamond-Like Carbon Electrodes for MEG II Experiment

Authors: Masato Takahashi, Sei Ban, Weiyuan Li, Atsuhiko Ochi, Wataru Ootani, Atsushi Oya, Hiromu Suzuki, Kensuke Yamamoto

Abstract: A novel type of resistive plate chamber, based on diamond-like carbon (DLC) electrodes is under development for background identification in the MEG II experiment. The DLC-RPC is required to have a radiation hardness to mass irradiation since it is planned to be placed in a high-intensity and low-momentum muon beam. In this study, the aging test using a high-intensity X-ray beam was conducted to e… ▽ More A novel type of resistive plate chamber, based on diamond-like carbon (DLC) electrodes is under development for background identification in the MEG II experiment. The DLC-RPC is required to have a radiation hardness to mass irradiation since it is planned to be placed in a high-intensity and low-momentum muon beam. In this study, the aging test using a high-intensity X-ray beam was conducted to evaluate the radiation hardness of the DLC-RPC. The accumulated charge due to X-ray irradiation reached about 54 C/cm$^2$, which is approximately half of the one-year irradiation dose expected in the MEG II experiment. As a result, the degradation of the gas gain was observed due to fluorine deposition and insulators formed on the DLC electrodes. In addition, discharges via spacers were also observed repeatedly and interrupted the DLC-RPC operation. △ Less

Submitted 8 July, 2024; v1 submitted 29 February, 2024; originally announced February 2024.

Comments: 5 pages, 10 figures. Contribution to 3rd International Conference on Detector Stability and Aging Phenomena in Gaseous Detectors, November 6-10 2023. Submitted to Nuclear Inst. and Methods in Physics Research, A

Journal ref: NIM A 1066 (2024) 169509

Chirality enhancement using topology-designed 3D nanophotonic antennas

Authors: Atsushi Taguchi, Yamato Fukui, Keiji Sasaki

Abstract: We explore chiroptical phenomena in 3D chiral nano-gap antennas using topology optimization. The characteristic helical geometries of the topology-designed antennas exhibit giant chiral dissymmetry (g=-1.70) considering the gap intensity, circular-to-linear polarization conversion, and circularly polarized light emission from a linear dipole coupled with the antenna. We observed that the spin angu… ▽ More We explore chiroptical phenomena in 3D chiral nano-gap antennas using topology optimization. The characteristic helical geometries of the topology-designed antennas exhibit giant chiral dissymmetry (g=-1.70) considering the gap intensity, circular-to-linear polarization conversion, and circularly polarized light emission from a linear dipole coupled with the antenna. We observed that the spin angular momentum of light, flowing into the nanogap with opposite signs, locally amplifies optical chirality. These findings carry profound implications for the nanoscale control of complex light-matter interactions with structured light. △ Less

Submitted 18 February, 2024; v1 submitted 16 February, 2024; originally announced February 2024.

Comments: 6 pages, 5 figures

Non-Equilibrium Fluidization of Dense Active Suspension

Authors: Yujiro Sugino, Hiroyuki Ebata, Yoshiyuki Sowa, Atsushi Ikeda, Daisuke Mizuno

Abstract: We investigate dense suspensions of swimming bacteria prepared in a nutrient-exchange chamber. Near the pellet concentration, nonthermal fluctuations showed notable agreement between self and collective behaviors, a phenomenon not previously observed at equilibrium. The viscosity of active suspensions dramatically decreased compared to their inactive counterparts, where glassy features, such as no… ▽ More We investigate dense suspensions of swimming bacteria prepared in a nutrient-exchange chamber. Near the pellet concentration, nonthermal fluctuations showed notable agreement between self and collective behaviors, a phenomenon not previously observed at equilibrium. The viscosity of active suspensions dramatically decreased compared to their inactive counterparts, where glassy features, such as non-Newtonian viscosity and dynamic heterogeneity, disappeared. Instead, the complex shear modulus showed a power-law rheology,$G^*(ω)\propto\left(-iω\right)^\frac{1}{2}$, indicating the role of bacterial activity in driving the system towards a critical jamming state. △ Less

Submitted 1 February, 2024; v1 submitted 28 January, 2024; originally announced January 2024.

Effect of Trip** and Domain-Width on Transonic Buffet on Periodic NASA-CRM Airfoils

Authors: David J. Lusher, Andrea Sansica, Atsushi Hashimoto

Abstract: Transonic buffet is an instability characterized by shock-oscillations and separated boundary-layers. High-fidelity simulations have typically been limited to narrow domains to be computationally feasible, overly constraining the flow and introducing modelling errors. Depending on the boundary-layer state upstream of the interaction, different buffet features are observed. High-fidelity simulation… ▽ More Transonic buffet is an instability characterized by shock-oscillations and separated boundary-layers. High-fidelity simulations have typically been limited to narrow domains to be computationally feasible, overly constraining the flow and introducing modelling errors. Depending on the boundary-layer state upstream of the interaction, different buffet features are observed. High-fidelity simulations were performed on the periodic NASA-CRM wing at moderate Reynolds number to assess sensitivity of the two-dimensional transonic buffet to boundary-layer state and domain width. Simulations were cross-validated against RANS/URANS and global stability analysis and excellent agreement was found near the onset. By varying the boundary-layer trip** amplitude, laminar, transitional, and turbulent buffet interactions were obtained. All cases consisted of a single shock and low-frequency oscillations $(St \approx 0.07)$. The transitional interaction also exhibited reduced shock movement, a $15\%$ increase in $\overline{C_L}$, and energy content at higher frequencies $(St \approx 1.3)$. Span-wise domain studies showed sensitivity at the shock location and near the trailing edge. We conclude that the span-width must be greater than the trailing-edge boundary-layer thickness to obtain span-independent solutions. For largely separated cases, the sensitivity to span-width increased and variations across the span were observed. This was found to be associated to a loss of two-dimensionality of the flow. △ Less

Submitted 26 January, 2024; originally announced January 2024.

Prototype study of $0.1\%\,X_0$ and $\mathrm{MHz/cm^2}$ tolerant Resistive Plate Chamber with Diamond-Like Carbon electrodes

Authors: Kei Ieki, Weiyuan Li, Atsuhiko Ochi, Rina Onda, Wataru Ootani, Atsushi Oya, Masato Takahashi, Kensuke Yamamoto

Abstract: A novel Resistive Plate Chamber (RPC) was designed with Diamond-Like Carbon (DLC) electrodes and performance studies were carried out for 384$\,\mathrm{μm}$ gap configuration with a $2\,\mathrm{cm}\times2\,\mathrm{cm}$ prototype. The use of thin films coated with DLC enables an ultra-low mass design of $< 0.1\%\,X_0$ with up to a four-layer configuration. At the same time, 42% MIP efficiency, and… ▽ More A novel Resistive Plate Chamber (RPC) was designed with Diamond-Like Carbon (DLC) electrodes and performance studies were carried out for 384$\,\mathrm{μm}$ gap configuration with a $2\,\mathrm{cm}\times2\,\mathrm{cm}$ prototype. The use of thin films coated with DLC enables an ultra-low mass design of $< 0.1\%\,X_0$ with up to a four-layer configuration. At the same time, 42% MIP efficiency, and 180 ps timing resolution per layer were achieved in a measurement performed under a $1\,\mathrm{MHz/cm^2}$ non-MIP charged particle beam. In addition, we propose a further improved design for a $20\,\mathrm{cm}$-scale detector that can achieve 90% four-layer efficiency in an even higher $4\,\mathrm{MHz/cm^2}$ beam. In this paper, we describe the detector design, present the results of performance measurements, and characterize the rate capability of the DLC-based RPCs with a performance projection for an improved design. △ Less

Submitted 24 January, 2024; originally announced January 2024.

Comments: 8 pages

Interaction of intense ultrashort laser pulses with solid targets: A systematic analysis using first-principles calculations

Authors: Atsushi Yamada, Kazuhiro Yabana

Abstract: Intense ultrashort laser pulse irradiation of solid targets was systematically investigated at the first-principles level, both theoretically and computationally. In the method, the propagation of a pulsed light through a thin film is described by a one-dimensional Maxwell's equation, and the microscopic electronic motion at different positions in the film is described by employing first-principle… ▽ More Intense ultrashort laser pulse irradiation of solid targets was systematically investigated at the first-principles level, both theoretically and computationally. In the method, the propagation of a pulsed light through a thin film is described by a one-dimensional Maxwell's equation, and the microscopic electronic motion at different positions in the film is described by employing first-principles time-dependent density functional theory (TDDFT). The method uses a coarse-graining approximation to couple light propagation and electronic motion, and is termed the multiscale Maxwell-TDDFT method. The reflectance, transmittance, and absorbance of pulsed light incident normally on thin films of 50-200 nm thickness were calculated for materials with different optical properties, such as aluminum (simple metal), graphite (semi-metal), silicon (small-gap dielectric), and quartz (wide-gap dielectric). Optical response transitions were explored as the light intensity shifted from the linear regime, represented by the dielectric function for weak light, to the extremely nonlinear regime, represented by plasma reflection under intense light conditions. Numerous mechanisms that depend on the laser pulse intensity and material type were found to contribute to these changes. These include multiphoton absorption, saturable absorption, sign change of the effective dielectric constant, and transition from quantum occupation to classical Boltzmann distribution. Thus, the calculations provide a unified understanding of the interaction of intense pulsed light with solids, occurring on an extremely short time scale. △ Less

Submitted 24 January, 2024; originally announced January 2024.

Comments: 17 pages, 6 figures

Time-resolved force microscopy using delay-time modulation method

Authors: Hiroyuki Mogi, Rin Wakabayashi, Shoji Yoshida, Yusuke Arashida, Atsushi Taninaka, Katsuya Iwaya, Takeshi Miura, Osamu Takeuchi, Hidemi Shigekawa

Abstract: We developed a time-resolved force microscopy technique by integrating atomic force microscopy using a tuning-fork-type cantilever with the delay time modulation method for optical pump-probe light. We successfully measured the dynamics of surface recombination and diffusion of photoexcited carriers in bulk WSe2, which is challenging owing to the effect of tunneling current in time-resolved scanni… ▽ More We developed a time-resolved force microscopy technique by integrating atomic force microscopy using a tuning-fork-type cantilever with the delay time modulation method for optical pump-probe light. We successfully measured the dynamics of surface recombination and diffusion of photoexcited carriers in bulk WSe2, which is challenging owing to the effect of tunneling current in time-resolved scanning tunneling microscopy. The obtained results were comprehensively explained with the model based on the dipole-dipole interaction induced by photo illumination. △ Less

Submitted 11 January, 2024; originally announced January 2024.

Comments: 13 pages, 4 figures

Journal ref: Applied Physics Express 17, 015003 (2024)

Experimental control of mode-competition dynamics in a chaotic multimode semiconductor laser for decision making

Authors: Ryugo Iwami, Takatomo Mihana, Kazutaka Kanno, Makoto Naruse, Atsushi Uchida

Abstract: Photonic computing has been widely used to accelerate the computational performance in machine learning. Photonic decision-making is a promising approach that uses photonic computing technologies to solve the multi-armed bandit problem based on reinforcement learning. Photonic decision making using chaotic mode competition dynamics has been proposed. However, the experimental conditions for achiev… ▽ More Photonic computing has been widely used to accelerate the computational performance in machine learning. Photonic decision-making is a promising approach that uses photonic computing technologies to solve the multi-armed bandit problem based on reinforcement learning. Photonic decision making using chaotic mode competition dynamics has been proposed. However, the experimental conditions for achieving superior decision-making performance have not yet been established. In this study, we experimentally investigate the mode competition dynamics in a chaotic multimode semiconductor laser in the presence of optical feedback and injection. We control chaotic mode-competition dynamics via optical injection, and we found that positive wavelength detuning results in an efficient mode concentration to one of the longitudinal modes with a small optical injection power. We experimentally investigate two-dimensional bifurcation map of the laser dynamics of the total intensity. Complex mixed dynamics are observed in the presence of optical feedback and injection. We experimentally conduct decision making to solve the bandit problem using chaotic mode-competition dynamics. A fast mode concentration property is observed at positive wavelength detuning, which resulted in a fast convergence of the correct decision rate. Our findings could be useful in accelerating the decision-making performance in adaptive optical networks using reinforcement learning. △ Less

Submitted 27 December, 2023; originally announced December 2023.

Comments: 19 pages, 14 figures

Thermodynamic and Stoichiometric Laws Ruling the Fates of Growing Systems

Authors: Atsushi Kamimura, Yuki Sughiyama, Tetsuya J. Kobayashi

Abstract: We delve into growing open chemical reaction systems (CRSs) characterized by autocatalytic reactions within a variable volume, which changes in response to these reactions. Understanding the thermodynamics of such systems is crucial for comprehending biological cells and constructing protocells, as it sheds light on the physical conditions necessary for their self-replication. Building on our rece… ▽ More We delve into growing open chemical reaction systems (CRSs) characterized by autocatalytic reactions within a variable volume, which changes in response to these reactions. Understanding the thermodynamics of such systems is crucial for comprehending biological cells and constructing protocells, as it sheds light on the physical conditions necessary for their self-replication. Building on our recent work, where we developed a thermodynamic theory for growing CRSs featuring basic autocatalytic motifs with regular stoichiometric matrices, we now expand this theory to include scenarios where the stoichiometric matrix has a nontrivial left kernel space. This extension introduces conservation laws, which limit the variations in chemical species due to reactions, thereby confining the system's possible states to those compatible with its initial conditions. By considering both thermodynamic and stoichiometric constraints, we clarify the environmental and initial conditions that dictate the CRSs' fate-whether they grow, shrink, or reach equilibrium. We also find that the conserved quantities significantly influence the equilibrium state achieved by a growing CRS. These results are derived independently of specific thermodynamic potentials or reaction kinetics, therefore underscoring the fundamental impact of conservation laws on the growth of the system. △ Less

Submitted 3 May, 2024; v1 submitted 21 December, 2023; originally announced December 2023.

Comments: 26 pages, 9 figures

Stiff deployable structures via coupling of thick Miura-ori tubes along creases

Authors: Sunao Tomita, Kento Shimanuki, Kazuhiko Umemoto, Atsushi Kawamoto, Tsuyoshi Nomura, Tomohiro Tachi

Abstract: Origami-based structures play an important role in the realization of deployable mechanisms and unique mechanical properties via programmable deformation by folding. Among origami-based structures, tessellation by the coupling of origami tubes enriches the variations in geometry and mechanical properties. However, thickness accommodation is a critical problem in engineering applications involving… ▽ More Origami-based structures play an important role in the realization of deployable mechanisms and unique mechanical properties via programmable deformation by folding. Among origami-based structures, tessellation by the coupling of origami tubes enriches the variations in geometry and mechanical properties. However, thickness accommodation is a critical problem in engineering applications involving the coupling of thick origami tubes. To solve this problem, this study proposes the coupling of thick Miura-ori tubes along the creases for facile fabrication, which sustains the one-degree-of-freedom (DOF) motion of thick Miura-ori tubes owing to the local mirror symmetry around the coupling interfaces. Furthermore, the coupling method contributes to the high stiffness of the coupled Miura-ori tubes, as evidenced by the wide gap in the eigenvalues between the one-DOF mode and the elastic modes obtained by the bar-and-hinge models. Finally, meter-scale coupled Miura-ori tubes were fabricated to demonstrate one-DOF motion and high stiffness. The findings of this study enable the rapid construction of structures by one-DOF motion and enhancement of transportability via flat-foldability. △ Less

Submitted 7 December, 2023; originally announced December 2023.

Comments: 41 pages, 16 figures

Quantitative evaluation of simultaneous spatial and temporal regularization in liver perfusion studies using low-dose dynamic contrast-enhanced CT

Authors: Kenya Murase, Atsushi Nakamoto, Noriyuki Tomiyama

Abstract: The purpose of this study was to quantitatively evaluate the performance of different simultaneous spatial and temporal regularizers in liver perfusion studies using low-dose dynamic contrast-enhanced computed tomography (DCE-CT). A digital liver phantom was used to simulate chronic liver disease (CLD) and hepatocellular carcinoma (HCC) based on clinical data. Low-dose DCE-CT images were reconstru… ▽ More The purpose of this study was to quantitatively evaluate the performance of different simultaneous spatial and temporal regularizers in liver perfusion studies using low-dose dynamic contrast-enhanced computed tomography (DCE-CT). A digital liver phantom was used to simulate chronic liver disease (CLD) and hepatocellular carcinoma (HCC) based on clinical data. Low-dose DCE-CT images were reconstructed using regularizers and a primal-dual algorithm. Subsequently, hepatic perfusion parameter (HPP) images were generated using a dual-input single-compartment model and linear least-squares method. In the CLD model, the effect of regularizers on the input functions (IFs) was examined by calculating the areas under the curves (AUCs) of the IFs, and the HPP estimation accuracy was evaluated by calculating the error and coefficient of variation (CV) between the HPP values obtained by the above methods and true values. In the HCC model, the ratios of the mean HPP values inside and outside the tumor were calculated. The AUCs of IFs decreased with increasing regularization parameter (RP) values. Although the AUC of arterial IF did not significantly depend on the regularizers, that of portal IF did. The error and CV were reduced using low-rank and sparse decomposition (LRSD). Total generalized variation (TGV) combined with LRSD (LTGV) was generally superior to the other regularizers in terms of HPP estimation accuracy and range of available RP values in both the CLD and HCC models. However, striped artifacts were more remarkable in the HPP images obtained by the TGV and LTGV than in those obtained by the other regularizers. The results suggest that the LRSD and LTGV are useful for improving the accuracy of HPP estimation using low-dose DCE-CT and for enhancing its practicality. This study will help select a suitable regularizer and/or RP value for low-dose DCE-CT liver perfusion studies. △ Less

Submitted 19 October, 2023; originally announced October 2023.

Comments: 32 pages, 1 table, 10 figures

Geometric landscape annealing as an optimization principle underlying the coherent Ising machine

Authors: Atsushi Yamamura, Hideo Mabuchi, Surya Ganguli

Abstract: Given the fundamental importance of combinatorial optimization across many diverse application domains, there has been widespread interest in the development of unconventional physical computing architectures that can deliver better solutions with lower resource costs. These architectures embed discrete optimization problems into the annealed, analog evolution of nonlinear dynamical systems. Howev… ▽ More Given the fundamental importance of combinatorial optimization across many diverse application domains, there has been widespread interest in the development of unconventional physical computing architectures that can deliver better solutions with lower resource costs. These architectures embed discrete optimization problems into the annealed, analog evolution of nonlinear dynamical systems. However, a theoretical understanding of their performance remains elusive, unlike the cases of simulated or quantum annealing. We develop such understanding for the coherent Ising machine (CIM), a network of optical parametric oscillators that can be applied to any quadratic unconstrained binary optimization problem. Here we focus on how the CIM finds low-energy solutions of the Sherrington-Kirkpatrick spin glass. As the laser gain is annealed, the CIM interpolates between gradient descent on the soft-spin energy landscape, to optimization on coupled binary spins. By exploiting spin-glass theory, we develop a detailed understanding of the evolving geometry of the high-dimensional CIM energy landscape as the laser gain increases, finding several phase transitions, from flat, to rough, to rigid. Additionally, we develop a cavity method that provides a precise geometric interpretation of supersymmetry breaking in terms of the response of a rough landscape to specific perturbations. We confirm our theory with numerical experiments, and find detailed information about critical points of the landscape. Our extensive analysis of phase transitions provides theoretically motivated optimal annealing schedules that can reliably find near-ground states. This analysis reveals geometric landscape annealing as a powerful optimization principle and suggests many further avenues for exploring other optimization problems, as well as other types of annealed dynamics, including chaotic, oscillatory or quantum dynamics. △ Less

Submitted 14 September, 2023; originally announced September 2023.

Comments: 73 pages, 10 figures

Solving multi-armed bandit problems using a chaotic microresonator comb

Authors: Jonathan Cuevas, Ryugo Iwami, Atsushi Uchida, Kaoru Minoshima, Naoya Kuse

Abstract: The Multi-Armed Bandit (MAB) problem, foundational to reinforcement learning-based decision-making, addresses the challenge of maximizing rewards amidst multiple uncertain choices. While algorithmic solutions are effective, their computational efficiency diminishes with increasing problem complexity. Photonic accelerators, leveraging temporal and spatial-temporal chaos, have emerged as promising a… ▽ More The Multi-Armed Bandit (MAB) problem, foundational to reinforcement learning-based decision-making, addresses the challenge of maximizing rewards amidst multiple uncertain choices. While algorithmic solutions are effective, their computational efficiency diminishes with increasing problem complexity. Photonic accelerators, leveraging temporal and spatial-temporal chaos, have emerged as promising alternatives. However, despite these advancements, current approaches either compromise computation speed or amplify system complexity. In this paper, we introduce a chaotic microresonator frequency comb (chaos comb) to tackle the MAB problem, where each comb mode is assigned to a slot machine. Through a proof-of-concept experiment, we employ 44 comb modes to address an MAB with 44 slot machines, demonstrating performance competitive with both conventional software algorithms and other photonic methods. Further, the scalability of decision making is explored with up to 512 slot machines using experimentally obtained temporal chaos in different time slots. Power-law scalability is achieved with an exponent of 0.96, outperforming conventional software-based algorithms. Moreover, we find that a numerically calculated chaos comb accurately reproduces experimental results, paving the way for discussions on strategies to increase the number of slot machines. △ Less

Submitted 22 August, 2023; v1 submitted 21 August, 2023; originally announced August 2023.

Wireless data transmission in a 560-GHz band using low-phase-noise terahertz wave generated by photomixing of a pair of distributed feedback lasers injection-locking to Kerr micro-resonator soliton comb

Authors: Yu Tokizane, Shota Okada, Takumi Kikuhara, Hiroki Kishikawa, Yasuhiro Okamura, Yoshihiro Makimoto, Kenji Nishimoto, Takeo Minamikawa, Eiji Hase, Jun-Ichi Fujikata, Masanobu Haraguchi, Atsushi Kanno, Shintaro Hisatake, Naoya Kuse, Takeshi Yasui

Abstract: The demand for higher data rates in next-generation mobile wireless communication systems (6G) has led to significant interest in terahertz (THz) waves as a high-frequency, broad modulation bandwidth carrier wave. In this study, we propose and demonstrate a wireless data transfer in the 560-GHz band using low-phase-noise THz waves generated by photomixing of a pair of distributed feedback lasers i… ▽ More The demand for higher data rates in next-generation mobile wireless communication systems (6G) has led to significant interest in terahertz (THz) waves as a high-frequency, broad modulation bandwidth carrier wave. In this study, we propose and demonstrate a wireless data transfer in the 560-GHz band using low-phase-noise THz waves generated by photomixing of a pair of distributed feedback lasers injection-locking to Kerr micro-resonator soliton comb. Experimental results showed near-error-free on-off keying (OOK) data transfer at 1 Gbit/s in the 560-GHz band, with a Q-factor of 6.23, surpassing the error-free limit. Also, modulation formats of binary phase shift keying (BPSK) and quadrature phase shift keying (QPSK) were successfully used, showing clear constellation diagrams and relatively low root mean squared error vector magnitude (rms EVM) values of 23.9% and 23.6%, respectively. Moreover, data transfer at 0.4 Gbit/s in 16 quadrature amplitude modulation (16QAM) demonstrated clear isolated symbols and achieved a low rms EVM value of 8.1%, complying with the IEEE 802.15.3d standard amendment. These demonstrations highlight the potential of using injection-locked DFB lasers with the Kerr micro-resonator soliton comb to achieve high-quality, high-speed wireless data transfer in the 560-GHz band. These findings contribute significantly to the advancement of wireless communication technology in the THz frequency range and pave the way for the realization of 6G wireless communication systems. △ Less

Submitted 21 August, 2023; v1 submitted 5 August, 2023; originally announced August 2023.

Thermal pure matrix product state in two dimensions: tracking thermal equilibrium from paramagnet down to the Kitaev honeycomb spin liquid state

Authors: Matthias Gohlke, Atsushi Iwaki, Chisa Hotta

Abstract: We present the first successful application of the matrix product state (MPS) representing a thermal quantum pure state (TPQ) in equilibrium in two spatial dimensions over almost the entire temperature range. We use the Kitaev honeycomb model as a prominent example hosting a quantum spin liquid (QSL) ground state to target the two specific-heat peaks previously solved nearly exactly using the free… ▽ More We present the first successful application of the matrix product state (MPS) representing a thermal quantum pure state (TPQ) in equilibrium in two spatial dimensions over almost the entire temperature range. We use the Kitaev honeycomb model as a prominent example hosting a quantum spin liquid (QSL) ground state to target the two specific-heat peaks previously solved nearly exactly using the free Majorana fermionic description. Starting from the high-temperature random state, our TPQ-MPS framework on a cylinder precisely reproduces these peaks, showing that the quantum many-body description based on spins can still capture the emergent itinerant Majorana fermions in a ${\mathbb Z}_2$ gauge field. The truncation process efficiently discards the high-energy states, eventually reaching the long-range entangled topological state approaching the exact ground state for a given finite size cluster. An advantage of TPQ-MPS over exact diagonalization or purification-based methods is its lowered numerical cost coming from a reduced effective Hilbert space even at finite temperature. △ Less

Submitted 17 October, 2023; v1 submitted 3 August, 2023; originally announced August 2023.

Comments: 15 pages, 4 figures, submission to SciPost

Journal ref: SciPost Phys. 15, 206 (2023)

Selectable diffusion direction with topologically protected edge modes

Authors: Keita Funayama, Jun Hirotani, Atsushi Miura, Hiroya Tanaka

Abstract: Topological insulators provide great potentials to control diffusion phenomena as well as waves. Here, we show that the direction of thermal diffusion can be selected by the contributions of the topologically protected edge modes via the quantum spin Hall effect in a honeycomb-shaped structure. We demonstrate that when we set our structure to the temperature corresponding to the type of edge mode,… ▽ More Topological insulators provide great potentials to control diffusion phenomena as well as waves. Here, we show that the direction of thermal diffusion can be selected by the contributions of the topologically protected edge modes via the quantum spin Hall effect in a honeycomb-shaped structure. We demonstrate that when we set our structure to the temperature corresponding to the type of edge mode, the direction of thermal diffusion can be tuned. Moreover, this diffusion system is found to be immune to defects owing to the robustness of topological states. Our work points to exciting new avenues for controlling diffusion phenomena. △ Less

Submitted 1 August, 2023; originally announced August 2023.

Comments: 8 pages, 5 figures

Hyperfine transition induced by atomic motion above a paraffin-coated magnetic film

Authors: Naota Sekiguchi, Hiroaki Usui, Atsushi Hatakeyama

Abstract: We measured transitions between the hyperfine levels of the electronic ground state of potassium-39 atoms (transition frequency: 460 MHz) as the atoms moved through a periodic magneto-static field produced above the magnetic-stripe domains of a magnetic film. The period length of the magnetic field was 3.8 um. The atoms were incident to the field as an im**ing beam with the most probable velocit… ▽ More We measured transitions between the hyperfine levels of the electronic ground state of potassium-39 atoms (transition frequency: 460 MHz) as the atoms moved through a periodic magneto-static field produced above the magnetic-stripe domains of a magnetic film. The period length of the magnetic field was 3.8 um. The atoms were incident to the field as an im**ing beam with the most probable velocity of 550 m/s and experienced a peak oscillating field of 20 mT. Unwanted spin relaxation caused by the collisions of the atoms with the film surface was suppressed by the paraffin coating on the film. We observed increasing hyperfine transition probabilities as the frequency of the field oscillations experienced by the atoms increased from 0 to 140 MHz for the atomic velocity of 550 m/s, by changing the incident angle of the atomic beam with respect to the stripe domains. Numerical calculation of the time evolution of the hyperfine states revealed that the oscillating magnetic field experienced by the atoms induced the hyperfine transitions, and the main process was not a single-quantum transition but rather multi-quanta transitions. △ Less

Submitted 17 October, 2023; v1 submitted 1 August, 2023; originally announced August 2023.

Comments: 12 pages, 6 figures. Accepted manuscript

Journal ref: J. Phys. B: At. Mol. Opt. Phys. 56 (2023) 215001 (7pp)

Algorithm for spin symmetry operation search

Authors: Kohei Shinohara, Atsushi Togo, Hikaru Watanabe, Takuya Nomoto, Isao Tanaka, Ryotaro Arita

Abstract: A spin space group provides a suitable way to fully exploit the symmetry of a spin arrangement with a negligible spin-orbit coupling. There has been a growing interest in applying spin symmetry analysis with the spin space group in the field of magnetism. However, there is no established algorithm to search for spin symmetry operations of the spin space group. This paper presents an exhaustive alg… ▽ More A spin space group provides a suitable way to fully exploit the symmetry of a spin arrangement with a negligible spin-orbit coupling. There has been a growing interest in applying spin symmetry analysis with the spin space group in the field of magnetism. However, there is no established algorithm to search for spin symmetry operations of the spin space group. This paper presents an exhaustive algorithm for determining spin symmetry operations of commensurate spin arrangements. The present algorithm searches for spin symmetry operations from the symmetry operations of a corresponding nonmagnetic crystal structure and determines their spin-rotation parts by solving a Procrustes problem. An implementation is distributed under a permissive free software license in spinspg v0.1.1: https://github.com/spglib/spinspg. △ Less

Submitted 21 October, 2023; v1 submitted 23 July, 2023; originally announced July 2023.

Role of Pore Dilation in Molecular Transport through the Nuclear Pore Complex: Insights from Polymer Scaling Theory

Authors: Atsushi Matsuda, Mohammad R. K. Mofrad

Abstract: Recent studies have suggested that the Nuclear Pore Complex (NPC) plays a significant role in mechanotransduction. When a force is exerted, the NPC's diameter widens, leading to an increased molecular flux into the nucleus. In this study, we sought to further explore this phenomenon and quantitativelly assess the impact of pore dilation on molecular transport through the NPC. Utilizing the scaling… ▽ More Recent studies have suggested that the Nuclear Pore Complex (NPC) plays a significant role in mechanotransduction. When a force is exerted, the NPC's diameter widens, leading to an increased molecular flux into the nucleus. In this study, we sought to further explore this phenomenon and quantitativelly assess the impact of pore dilation on molecular transport through the NPC. Utilizing the scaling theory of polymers, we developed a theoretical model to examine the relationship between pore size and the molecular transport rate. Our model posits that the mesh structure inside the pore, formed by FG-Nups, significantly influences the transport rate. Consequently, we propose that the transport rate is exponentially related to the pore size. To validate our model, we conducted extensive Brownian dynamics simulations. Our results demonstrated that the model accurately represents the transport dynamics except for exceptionally small molecules. For these molecules, the local mesh structure becomes less significant, and instead, they perceive the global structure of the pore. We also identified a critical threshold value, which allows for an estimation of whether a given molecule falls within the scope of our model. Our findings provide valuable insights into the dynamics of molecular transport in the NPC and pave the way for future research on the NPC's role in mechanotransduction. △ Less

Submitted 16 July, 2023; originally announced July 2023.

Large-volume focus control at 10 MHz refresh rate via fast line-scanning amplitude-encoded scattering-assisted holography

Authors: Atsushi Shibukawa, Ryota Higuchi, Gookho Song, Hideharu Mikami, Yuki Sudo, Mooseok Jang

Abstract: The capability of focus control has been central to optical technologies that require both high temporal and spatial resolutions. However, existing varifocal lens schemes are commonly limited to the response time on the microsecond timescale and share the fundamental trade-off between the response time and the tuning power. Here, we propose an ultrafast holographic focusing method enabled by trans… ▽ More The capability of focus control has been central to optical technologies that require both high temporal and spatial resolutions. However, existing varifocal lens schemes are commonly limited to the response time on the microsecond timescale and share the fundamental trade-off between the response time and the tuning power. Here, we propose an ultrafast holographic focusing method enabled by translating the speed of a fast 1D beam scanner into the speed of the complex wavefront modulation of a relatively slow 2D spatial light modulator. Using a pair of a digital micromirror device and a resonant scanner, we demonstrate an unprecedented refresh rate of focus control of 31 MHz, which is more than 1,000 times faster than the switching rate of a digital micromirror device. We also show that multiple micrometer sized focal spots can be independently addressed in a range of over 1 MHz within a large volume of 5 mm x 5 mm x 5.5 mm, validating the superior spatiotemporal characteristics of the proposed technique - high temporal and spatial precision, high tuning power, and random accessibility in a three-dimensional space. The demonstrated scheme offers a new route towards three-dimensional light manipulation in the 100 MHz regime. △ Less

Submitted 21 June, 2023; originally announced June 2023.

A strategy to identify breakdown location in MITICA test facility: results of high voltage test campaign

Authors: Loris Zanotto, Marco Boldrin, Giuseppe Chitarin, Mattia Dan, Tommaso Patton, Francesco Santoro, Vanni Toigo, Hiroyuki Tobari, Atsushi Kojima, Hans Decamps

Abstract: The Acceleration Grid Power Supply of the MITICA test facility in Padova (Italy) is currently under commissioning. The power conversion system, the DC generator, and the High Voltage equipment have been individually commissioned, whereas the integration tests are ongoing. It is a challenging process due to the unconventional application, to the variety of different electrical technologies involved… ▽ More The Acceleration Grid Power Supply of the MITICA test facility in Padova (Italy) is currently under commissioning. The power conversion system, the DC generator, and the High Voltage equipment have been individually commissioned, whereas the integration tests are ongoing. It is a challenging process due to the unconventional application, to the variety of different electrical technologies involved and to the complexity of the interfaces. During the integrated tests of the power supplies the achievement of 700kV stable operation has been demonstrated for the first time in a Neutral Beam Injector, but an unexpected event occurred, most likely a breakdown in the HV part, which resulted in a fault of the DC generator. A subsequent test using an auxiliary power supply was performed to check the voltage withstanding capability of the HV plant, but another breakdown occurred at around 1MV. This paper describes the activity performed to identify the location of the breakdowns affecting the integrated tests. A test campaign has been devised with increased diagnostic capabilities and specific strategy conceived to trigger intentional breakdowns in specific locations and collect measurement patterns for different cases. The results of the campaign will be presented and the current understanding of the issue will be described, with a view on future tests and further improvements of diagnostics. △ Less

Submitted 26 April, 2023; originally announced April 2023.

Carrier conversion from terahertz wave to dual-wavelength near-infrared light injection-locking to optical comb using asynchronous nonpolarimetric electro-optic downconversion with electro-optic polymer modulator

Authors: Yudai Matsumura, Yu Tokizane, Eiji Hase, Naoya Kuse, Takeo Minamikawa, Jun-ichi Fujikata, Hiroki Kishikawa, Masanobu Haraguchi, Yasuhiro Okamura, Takahiro Kaji, Akira Otomo, Isao Morohashi, Atsushi Kanno, Shintaro Hisatake, Takeshi Yasui

Abstract: THz waves are promising wireless carriers for next-generation wireless communications, where a seamless connection from wireless to optical communication is required. In this study, we demonstrate carrier conversion from THz waves to dual-wavelength NIR light injection-locking to an optical frequency comb using asynchronous nonpolarimetric electro-optic downconversion with an electro-optic polymer… ▽ More THz waves are promising wireless carriers for next-generation wireless communications, where a seamless connection from wireless to optical communication is required. In this study, we demonstrate carrier conversion from THz waves to dual-wavelength NIR light injection-locking to an optical frequency comb using asynchronous nonpolarimetric electro-optic downconversion with an electro-optic polymer modulator. THz wave in the W band was obtained as a stable photonic RF beat signal of 1 GHz with a signal-to-noise ratio of 25 dB via the proposed THz-to-NIR carrier conversion. In addition, the results imply the potential of the photonic detection of THz waves for wireless-to-optical seamless communication. △ Less

Submitted 25 April, 2023; originally announced April 2023.

Comments: 15 pages, 5 figures

Journal ref: Optics Express, Vol. 31, Issue 20, pp. 33103-33112 (2023)

Theory for Fourier-limited attosecond pulse generation in solids

Authors: Shohei Imai, Atsushi Ono

Abstract: The generation of ultrashort light pulses is essential for the advancement of attosecond science. Here, we show that attosecond pulses approaching the Fourier limit can be generated through optimized optical driving of tunneling particles in solids. We propose an ansatz for the wave function of tunneling electron-hole pairs based on a rigorous expression for massive Dirac fermions, which enables e… ▽ More The generation of ultrashort light pulses is essential for the advancement of attosecond science. Here, we show that attosecond pulses approaching the Fourier limit can be generated through optimized optical driving of tunneling particles in solids. We propose an ansatz for the wave function of tunneling electron-hole pairs based on a rigorous expression for massive Dirac fermions, which enables efficient optimization of the waveform of the driving field. It is revealed that the dynamic sign change in the effective mass due to optical driving is crucial for shortening the pulse duration, which highlights a distinctive property of Bloch electrons that is not present in atomic gases, i.e., the periodic nature of crystals. These results show the potential of utilizing solid materials as a source of attosecond pulses. △ Less

Submitted 23 March, 2023; originally announced March 2023.

Comments: 6 pages, 3 figures

Angular correlation of the two gamma rays produced in the thermal neutron capture on gadolinium-155 and gadolinium-157

Authors: Pierre Goux, Franz Glessgen, Enrico Gazzola, Mandeep Singh Reen, William Focillon, Michel Gonin, Tomoyuki Tanaka, Kaito Hagiwara, Ajmi Ali, Takashi Sudo, Yusuke Koshio, Makoto Sakuda, Gianmaria Collazuol, Atsushi Kimura, Shoji Nakamura, Nobuyuki Iwamoto, Hideo Harada, Michael Wurm

Abstract: The ANNRI-Gd collaboration studied in detail the single $γ$-ray spectrum produced from the thermal neutron capture on $^{155}$Gd and $^{157}$Gd in our previous publications. Gadolinium targets were exposed to a neutron beam provided by the Japan Spallation Neutron Source (JSNS) in J-PARC, Japan. In the present analysis, one new additional coaxial germanium crystal was used in the analysis in combi… ▽ More The ANNRI-Gd collaboration studied in detail the single $γ$-ray spectrum produced from the thermal neutron capture on $^{155}$Gd and $^{157}$Gd in our previous publications. Gadolinium targets were exposed to a neutron beam provided by the Japan Spallation Neutron Source (JSNS) in J-PARC, Japan. In the present analysis, one new additional coaxial germanium crystal was used in the analysis in combination with the fourteen germanium crystals in the cluster detectors to study the angular correlation of the two $γ$ rays emitted in the same neutron capture. We present for the first time angular correlation functions for two $γ$ rays produced during the electromagnetic cascade transitions in the (n, $γ$) reactions on $^{\rm 155}$Gd and $^{\rm 157}$Gd. As expected, we observe the mild angular correlations for the strong, but rare transitions from the resonance state to the two energy levels of known spin-parities. Contrariwise, we observe negligibly small angular correlations for arbitrary pairs of two $γ$ rays produced in the majority of cascade transitions from the resonance state to the dense continuum states. △ Less

Submitted 26 April, 2023; v1 submitted 17 March, 2023; originally announced March 2023.

Comments: 21 pages, 13 figures

Journal ref: Prog Theor Exp Phys (2023)

First results of axion dark matter search with DANCE

Authors: Yuka Oshima, Hiroki Fujimoto, Jun'ya Kume, Soichiro Morisaki, Koji Nagano, Tomohiro Fujita, Ippei Obata, Atsushi Nishizawa, Yuta Michimura, Masaki Ando

Abstract: Axions are one of the well-motivated candidates for dark matter, originally proposed to solve the strong CP problem in particle physics. Dark matter Axion search with riNg Cavity Experiment (DANCE) is a new experimental project to broadly search for axion dark matter in the mass range of $10^{-17}~\mathrm{eV} < m_a < 10^{-11}~\mathrm{eV}$. We aim to detect the rotational oscillation of linearly po… ▽ More Axions are one of the well-motivated candidates for dark matter, originally proposed to solve the strong CP problem in particle physics. Dark matter Axion search with riNg Cavity Experiment (DANCE) is a new experimental project to broadly search for axion dark matter in the mass range of $10^{-17}~\mathrm{eV} < m_a < 10^{-11}~\mathrm{eV}$. We aim to detect the rotational oscillation of linearly polarized light caused by the axion-photon coupling with a bow-tie cavity. The first results of the prototype experiment, DANCE Act-1, are reported from a 24-hour observation. We found no evidence for axions and set 95% confidence level upper limit on the axion-photon coupling $g_{a γ} \lesssim 8 \times 10^{-4}~\mathrm{GeV^{-1}}$ in $10^{-14}~\mathrm{eV} < m_a < 10^{-13}~\mathrm{eV}$. Although the bound did not exceed the current best limits, this optical cavity experiment is the first demonstration of polarization-based axion dark matter search without any external magnetic field. △ Less

Submitted 28 May, 2024; v1 submitted 6 March, 2023; originally announced March 2023.

Comments: 9 pages, 8 figures

Report number: RESCEU-4/23

Journal ref: Phys. Rev. D 108, 072005 (2023)

Plasma-Parameter Dependence of Ro-Vibrational Temperatures for $\mathrm{H}_2$ in LHD Divertor

Authors: Keisuke Fujii, Tsubasa Oshioka, Atsushi Niihama, Kuzmin Arseniy, Taiichi Shikama, Masahiro Kobayashi, Masahiro Hasuo, the LHD Experiment Group

Abstract: We analyzed a thousand visible spectra of Fulcher-$α$ band measured for divertor plasmas in Large Helical Device. With a coronal model and Baysian inference, the population distribution of hydrogen molecule in the electronical ground state were estimated. The non-thermal population distribution was recovered with a two-temperature model, which has two sets of rotational and vibrational temperature… ▽ More We analyzed a thousand visible spectra of Fulcher-$α$ band measured for divertor plasmas in Large Helical Device. With a coronal model and Baysian inference, the population distribution of hydrogen molecule in the electronical ground state were estimated. The non-thermal population distribution was recovered with a two-temperature model, which has two sets of rotational and vibrational temperatures, as well as their mixture coefficient. The lower rotational temperature significantly changes according to the plasma parameters. Its nearly linear dependence on the electron density was found, which is consistent with previous works. The lower vibrational temperature also shows a small density dependence, as reported by a previous work. On the other hand, the higher rotational and vibrational temperatures as well as the mixture coefficient only show slight changes over the broad range of plasma parameters. These population parameters show a significant correlation; with higher electron density, all the temperatures and the fraction of the higher-temperature component increase simultaneously. This suggests that the electron-impact plays an important role to determine the population distribution. △ Less

Submitted 16 February, 2023; originally announced February 2023.

Ultrafast single-channel machine vision based on neuro-inspired photonic computing

Authors: Tomoya Yamaguchi, Kohei Arai, Tomoaki Niiyama, Atsushi Uchida, Satoshi Sunada

Abstract: High-speed machine vision is increasing its importance in both scientific and technological applications. Neuro-inspired photonic computing is a promising approach to speed-up machine vision processing with ultralow latency. However, the processing rate is fundamentally limited by the low frame rate of image sensors, typically operating at tens of hertz. Here, we propose an image-sensor-free machi… ▽ More High-speed machine vision is increasing its importance in both scientific and technological applications. Neuro-inspired photonic computing is a promising approach to speed-up machine vision processing with ultralow latency. However, the processing rate is fundamentally limited by the low frame rate of image sensors, typically operating at tens of hertz. Here, we propose an image-sensor-free machine vision framework, which optically processes real-world visual information with only a single input channel, based on a random temporal encoding technique. This approach allows for compressive acquisitions of visual information with a single channel at gigahertz rates, outperforming conventional approaches, and enables its direct photonic processing using a photonic reservoir computer in a time domain. We experimentally demonstrate that the proposed approach is capable of high-speed image recognition and anomaly detection, and furthermore, it can be used for high-speed imaging. The proposed approach is multipurpose and can be extended for a wide range of applications, including tracking, controlling, and capturing sub-nanosecond phenomena. △ Less

Submitted 15 February, 2023; originally announced February 2023.

Comments: 30 pages, 12 figures

Journal ref: Commun Phys 6, 250 (2023)

Compact atom source using fiber-based pulsed laser ablation

Authors: Alto Osada, Ryuta Tamaki, Wenbo Lin, Ippei Nakamura, Atsushi Noguchi

Abstract: We designed, demonstrated, and characterized an atom source based on fiber-based pulsed laser ablation. By using commercially available miniature lens system for focusing nanosecond pulsed laser of up to 225~$μ$J delivered through a multimode fiber of 105~$μ$m core, we successfully ablate a SrTiO$_3$ target and generate a jet of neutral strontium atoms, though our method can be applied to other tr… ▽ More We designed, demonstrated, and characterized an atom source based on fiber-based pulsed laser ablation. By using commercially available miniature lens system for focusing nanosecond pulsed laser of up to 225~$μ$J delivered through a multimode fiber of 105~$μ$m core, we successfully ablate a SrTiO$_3$ target and generate a jet of neutral strontium atoms, though our method can be applied to other transparent ablation targets containing materials under concern. Our device endures 6\,000 cycles of pulse delivery and irradiation without noticeable damage on the fiber facets and lenses. The generated strontium beam is characterized with spectroscopic method and is revealed to exhibit the transverse temperature of 800~K and longitudinal velocity of 2\,300~m/s, which are typical of pulsed-laser-ablation-based atom source. The number of atoms generated by a single ablation pulse is estimated to be $2\times 10^5$. Our device provides a compact, cryo-compatible fiber-pigtailed atom source with minimized device footprints and reduced complexity of vacuum systems to further promote the developments of cold-atom experiments. It may also find interesting applications in atomic and molecular sciences. △ Less

Submitted 15 February, 2023; originally announced February 2023.

Comments: 4 pages, 3 figures

Observation of Acoustically Induced Dressed States of Rare-Earth Ions

Authors: Ryuichi Ohta, Gregoire Lelu, Xuejun Xu, Tomohiro Inaba, Kenichi Hitachi, Yoshitaka Taniyasu, Haruki Sanada, Atsushi Ishizawa, Takehiko Tawara, Katsuya Oguri, Hiroshi Yamaguchi, Hajime Okamoto

Abstract: Acoustically induced dressed states of long-lived erbium ions in a crystal are demonstrated. These states are formed by rapid modulation of two-level systems via strain induced by surface acoustic waves whose frequencies exceed the optical linewidth of the ion ensemble. Multiple sidebands and the reduction of their intensities appearing near the surface are evidence of a strong interaction between… ▽ More Acoustically induced dressed states of long-lived erbium ions in a crystal are demonstrated. These states are formed by rapid modulation of two-level systems via strain induced by surface acoustic waves whose frequencies exceed the optical linewidth of the ion ensemble. Multiple sidebands and the reduction of their intensities appearing near the surface are evidence of a strong interaction between the acoustic waves and the ions. This development allows for on-chip control of long-lived ions and paves the way to highly coherent hybrid quantum systems with telecom photons, acoustic phonons, and electrons. △ Less

Submitted 24 January, 2024; v1 submitted 1 February, 2023; originally announced February 2023.

Journal ref: Phys. Rev. Lett. 132, 036904 (2024)

Transverse spin angular momentum of space-time surface plasmon polariton wave packet

Authors: Naoki Ichiji, Daigo Oue, Murat Yessenov, Kenneth L. Schepler, Ayman F. Abouraddy, Atsushi Kubo

Abstract: In addition to longitudinal spin angular momentum (SAM) along the axis of propagation of light, spatially structured electromagnetic fields such as evanescent waves and focused beams have recently been found to possess transverse SAM in the direction perpendicular to the axis of propagation. In particular, the SAM of SPPs with spatial structure has been extensively studied in the last decade after… ▽ More In addition to longitudinal spin angular momentum (SAM) along the axis of propagation of light, spatially structured electromagnetic fields such as evanescent waves and focused beams have recently been found to possess transverse SAM in the direction perpendicular to the axis of propagation. In particular, the SAM of SPPs with spatial structure has been extensively studied in the last decade after it became clear that evanescent fields with spatially structured energy flow generate threedimensional spin texture. Here we present numerical calculations of the space-time surface plasmon polariton (ST-SPP) wave packet, a plasmonic bullet that propagates at an arbitrary group velocity while maintaining its spatial distribution. ST-SPP wave packets with complex spatial structure and energy flow density distribution determined by the group velocity are found to propagate with accompanying three-dimensional spin texture and finite topological charge density. Furthermore, the spatial distribution of the spin texture and topological charge density determined by the spatial structure of the SPP is controllable, and the deformation associated with propagation is negligible. ST-SPP wave packets, which can stably transport customizable three-dimensional spin textures and topological charge densities, can be excellent subjects of observation in studies of spinphotonics and optical topological materials. △ Less

Submitted 14 February, 2023; v1 submitted 29 January, 2023; originally announced January 2023.

Comments: 15 pages, 6 figures

Efficient low-energy single-electron detection using a large-area superconducting microstrip

Authors: Masato Shigefuji, Alto Osada, Masahiro Yabuno, Shigehito Miki, Hirotaka Terai, Atsushi Noguchi

Abstract: Superconducting strip single-photon detectors (SSPDs) are excellent tools not only for single-photon detection but also for single-particle detection owing to their high detection efficiency, low dark counts, and low time jitter. Although the detection of various particles, including electrons with keV-scale energy, has been reported so far, there have been no studies for detecting low-energy elec… ▽ More Superconducting strip single-photon detectors (SSPDs) are excellent tools not only for single-photon detection but also for single-particle detection owing to their high detection efficiency, low dark counts, and low time jitter. Although the detection of various particles, including electrons with keV-scale energy, has been reported so far, there have been no studies for detecting low-energy electrons. It has yet to be clarified how low-energy electrons interact with electrons and/or phonons in a superconductor during electron detection. Here we report the detection property of a superconducting micro-strip single-electron detector (SSED) for electrons with energy below 200 eV. The detection efficiency is estimated as at least 37 % when electrons im**ing on the stripline possess an energy of 200 eV. We also show that the minimum detectable energy of electrons is about 10 eV with our SSED, much lower than those of ions, which implies that the electron-electron interaction plays a significant role. SSEDs might open a wide range of applications, from condensed matter physics to quantum information science, because of their compatibility with the cryogenic environment. △ Less

Submitted 26 January, 2023; originally announced January 2023.

Terahertz wireless communication at 560-GHz band using Kerr micro-resonator soliton comb

Authors: Yu Tokizane, Shota Okada, Kenji Nishimoto, Yasuhiro Okamura, Hiroki Kishikawa, Eiji Hase, Jun-Ichi Fujikata, Masanobu Haraguchi, Atsushi Kanno, Shintaro Hisatake, Naoya Kuse, Takeshi Yasui

Abstract: Terahertz (THz) waves have attracted attention as carrier waves for next-generation wireless communications (6G). Electronic THz emitters are widely used in current mobile communications; however, they may face technical limitations in 6G with upper-frequency limits. We demonstrate wireless communication in a 560-GHz band by using a photonic THz emitter based on photomixing of a 560-GHz-spacing so… ▽ More Terahertz (THz) waves have attracted attention as carrier waves for next-generation wireless communications (6G). Electronic THz emitters are widely used in current mobile communications; however, they may face technical limitations in 6G with upper-frequency limits. We demonstrate wireless communication in a 560-GHz band by using a photonic THz emitter based on photomixing of a 560-GHz-spacing soliton microcomb in a uni-travelling carrier photodiode together with a THz receiver of Schottky barrier diode. The on-off keying data transfer with 2-Gbit/s achieves a Q-factor of 3.4, thus, satisfying the limit of forward error correction. △ Less

Submitted 25 January, 2023; originally announced January 2023.

Comments: 17 pages, 4 figure

Journal ref: Optics Continuum Vol. 2, Issue 5, pp. 1267-1275 (2023)

Exciting space-time surface plasmon polaritons by irradiating a nanoslit structure

Authors: Naoki Ichiji, Murat Yessenov, Kenneth L. Schepler, Ayman F. Abouraddy, Atsushi Kubo

Abstract: Space-time (ST) wave packets are propagation-invariant pulsed optical beams that travel freely in dielectrics at a tunable group velocity without diffraction or dispersion. Because ST wave packets maintain these characteristics even when only one transverse dimension is considered, they can realize surface-bound waves (e.g., surface plasmon polaritons at a metal-dielectric interface, which we call… ▽ More Space-time (ST) wave packets are propagation-invariant pulsed optical beams that travel freely in dielectrics at a tunable group velocity without diffraction or dispersion. Because ST wave packets maintain these characteristics even when only one transverse dimension is considered, they can realize surface-bound waves (e.g., surface plasmon polaritons at a metal-dielectric interface, which we call ST-SPPs) that have the same unique characteristics of their freely propagating counterparts. However, because the spatio-temporal spectral structure of ST-SPPs is key to their propagation invariance on the metal surface, their excitation methodology must be considered carefully. We show here using finite-difference time-domain (FDTD) simulations that an appropriately synthesized ST wave packet in free space can be couples to a ST-SPP via a single nano-scale slit inscribed in the metal surface. Our calculations confirm that this excitation methodology yields surface-bound ST-SPPs that are locarized in all dimensions (and can thus be considered as plasmonic 'bullets'), which travel rigidly at the metal-dielectric interface without diffraction or dispersion at a tunable group velocity. △ Less

Submitted 16 December, 2022; v1 submitted 11 December, 2022; originally announced December 2022.

Comments: 10 pages, 6 figures

Algorithms for magnetic symmetry operation search and identification of magnetic space group from magnetic crystal structure

Authors: Kohei Shinohara, Atsushi Togo, Isao Tanaka

Abstract: A crystal symmetry search is crucial for computational crystallography and materials science. Although algorithms and implementations for the crystal symmetry search have been developed, their extension to magnetic space groups (MSGs) remains limited. In this paper, algorithms for determining magnetic symmetry operations of magnetic crystal structures, identifying magnetic space-group types of giv… ▽ More A crystal symmetry search is crucial for computational crystallography and materials science. Although algorithms and implementations for the crystal symmetry search have been developed, their extension to magnetic space groups (MSGs) remains limited. In this paper, algorithms for determining magnetic symmetry operations of magnetic crystal structures, identifying magnetic space-group types of given MSGs, searching for transformations to a BNS setting, and symmetrizing the magnetic crystal structures using the MSGs are presented. The determination of magnetic symmetry operations is numerically stable and is implemented with minimal modifications from the existing crystal symmetry search. Magnetic space-group types and transformations to the BNS setting are identified by a two-step approach combining space-group type identification and the use of affine normalizers. Point coordinates and magnetic moments of the magnetic crystal structures are symmetrized by projection operators for the MSGs. An implementation is distributed with a permissive free software license in spglib v2.0.2: https://github.com/spglib/spglib. △ Less

Submitted 7 June, 2023; v1 submitted 27 November, 2022; originally announced November 2022.

Information Geometry of Dynamics on Graphs and Hypergraphs

Authors: Tetsuya J. Kobayashi, Dimitri Loutchko, Atsushi Kamimura, Shuhei A. Horiguchi, Yuki Sughiyama

Abstract: We introduce a new information-geometric structure associated with the dynamics on discrete objects such as graphs and hypergraphs. The presented setup consists of two dually flat structures built on the vertex and edge spaces, respectively. The former is the conventional duality between density and potential, e.g., the probability density and its logarithmic form induced by a convex thermodynamic… ▽ More We introduce a new information-geometric structure associated with the dynamics on discrete objects such as graphs and hypergraphs. The presented setup consists of two dually flat structures built on the vertex and edge spaces, respectively. The former is the conventional duality between density and potential, e.g., the probability density and its logarithmic form induced by a convex thermodynamic function. The latter is the duality between flux and force induced by a convex and symmetric dissipation function, which drives the dynamics of the density. These two are connected topologically by the homological algebraic relation induced by the underlying discrete objects. The generalized gradient flow in this doubly dual flat structure is an extension of the gradient flows on Riemannian manifolds, which include Markov jump processes and nonlinear chemical reaction dynamics as well as the natural gradient and mirror descent. The information-geometric projections on this doubly dual flat structure lead to information-geometric extensions of the Helmholtz-Hodge decomposition and the Otto structure in $L^{2}$ Wasserstein geometry. The structure can be extended to non-gradient nonequilibrium flows, from which we also obtain the induced dually flat structure on cycle spaces. This abstract but general framework can extend the applicability of information geometry to various problems of linear and nonlinear dynamics. △ Less

Submitted 5 August, 2023; v1 submitted 25 November, 2022; originally announced November 2022.

Comments: 92 pages, 9 figures