-
PlomBOX -- development of a low-cost CMOS device for environmental monitoring
Authors:
A. Aguilar-Arevalo,
E. Alba Posse,
M. Alvarez,
H. Arnaldi,
H. Asorey,
X. Bertou,
A. Colque,
A. Deisting,
A. Dias,
J. C. D'Olivo,
F. Favela-Pérez,
Y. Gándola,
E. A. Garcés,
J. Gasulla,
M. Gómez Berisso,
A. González Muñoz,
J. O. Guerra-Pulido,
S. Gutierrez,
S. Jois,
J. Lipovetzky,
J. Lovera,
M. B. Lovino,
D. J. Marín-Lámbarri,
L. Marpegan,
D. Martín
, et al. (14 additional authors not shown)
Abstract:
This paper reports on the development of a novel CMOS device employing lead-sensing bacteria to assay lead in drinking water. The objective of the PlomBOX project is to develop a low-cost sensor (£10) which can expedite access to on-demand assay methods and thus help mitigate lead intake through contaminated drinking water. The project follows three development paths: a) Certain bacteria can fluor…
▽ More
This paper reports on the development of a novel CMOS device employing lead-sensing bacteria to assay lead in drinking water. The objective of the PlomBOX project is to develop a low-cost sensor (£10) which can expedite access to on-demand assay methods and thus help mitigate lead intake through contaminated drinking water. The project follows three development paths: a) Certain bacteria can fluoresce or change colour when in the presence of lead. A genetically modified strain of Escherichia coli sensitive to lead concentrations up to 10 ppb is being developed. This constitutes the biosensor that fluoresces in proportion to the presence of lead. b) Bacteria response is imaged using a microprocessor (ESP32) with a camera module. This constitutes the optical metrology component of the PlomBOX. c) Data acquisition and control of the PlomBOX is achieved through a Bluetooth connection with the PlomApp, a custom-developed mobile phone application. Data are sent from the PlomApp to a database where a bespoke automated analysis software provides a result of the lead concentration in a sample of water. This paper reports on the instrumentation challenges of develo** the electronics for the PlomBOX and on the first prototype.
△ Less
Submitted 10 January, 2022;
originally announced January 2022.
-
Characterization of the muography background using the Muon Telescope (MuTe)
Authors:
Jesús Peña-Rodríguez,
Luis A. Núñez,
Hernán Asorey
Abstract:
In this work, we estimate the background components in muography using the MuTe: a hybrid muon telescope composed of two subdetectors -a scintillator hodoscope and a Water Cherenkov Detector (WCD). The hodoscope records the trajectories of particles crossing the telescope, while the WCD measures their energy loss. The MuTe hodoscope reconstructs 3841 different directions with an angular resolution…
▽ More
In this work, we estimate the background components in muography using the MuTe: a hybrid muon telescope composed of two subdetectors -a scintillator hodoscope and a Water Cherenkov Detector (WCD). The hodoscope records the trajectories of particles crossing the telescope, while the WCD measures their energy loss. The MuTe hodoscope reconstructs 3841 different directions with an angular resolution of 32 mrad for an inter-panel distance of 2.5 m. The spatial resolution can reach $\sim$25.6 m assuming an 800 m distance to the target. The WCD measures the deposited energy from 50 MeV to 1.5 GeV with a resolution of 0.72 MeV.
MuTe discriminates muography background sources such as: upward coming muons, scattered muons, the soft component of Extensive Air Showers (EAS), and particles arriving simultaneously. They are filtered by using measurements of deposited energy (WCD) and Time-of-Flight. The WCD differentiates single muons, electrons/positrons, and multiparticle events. On the other hand, the ToF measurements allow us to estimate the muon momentum establishing an energy threshold to decrease the background contribution of scattered muons. Upward coming muons are rejected by means of the particle arrival direction determined by the ToF sign.
We concluded that near 36% of the recorded events belong to the electromagnetic component (electrons and positrons), roughly 30.4% is caused by multiple particle events that arrive with time differences < 100 ns and the last 34% are caused by muons. The muonic soft component (< 1 GeV/c) represents 46% of the single-muon events. The upward going particles add up the 22% of the total flux crossing the MuTe.
△ Less
Submitted 22 February, 2021;
originally announced February 2021.
-
Characterization and on-field performance of the MuTe Silicon Photomultipliers
Authors:
J. Sánchez-Villafrades,
J. Peña-Rodríguez,
H. Asorey,
L. A. Núñez
Abstract:
The Muon Telescope is a muography experiment for imaging volcanoes in Colombia. It consists of a scintillator tracking system and a water Cherenkov detector used for particle deposited energy measurement. The MuTe operates autonomously in high altitude environments where the temperature gradient reaches up to $10$$^{\circ}$C. In this work, we characterize the breakdown voltage, gain, and noise of…
▽ More
The Muon Telescope is a muography experiment for imaging volcanoes in Colombia. It consists of a scintillator tracking system and a water Cherenkov detector used for particle deposited energy measurement. The MuTe operates autonomously in high altitude environments where the temperature gradient reaches up to $10$$^{\circ}$C. In this work, we characterize the breakdown voltage, gain, and noise of the telescope silicon photomultipliers for temperature variations spanning $0$ to $40$$^{\circ}$C. We demonstrated that the discrimination threshold for the MuTe hodoscope must be above 5 pe to avoid contamination due to the SiPM dark count, crosstalk, and afterpulsing. We also assess the MuTe counting rate depending on day-night temperature variations.
△ Less
Submitted 1 February, 2021;
originally announced February 2021.
-
Design, upgrade and characterization of the silicon photomultiplier front-end for the AMIGA detector at the Pierre Auger Observatory
Authors:
The Pierre Auger Collaboration,
A. Aab,
P. Abreu,
M. Aglietta,
J. M. Albury,
I. Allekotte,
A. Almela,
J. Alvarez-Muñiz,
R. Alves Batista,
G. A. Anastasi,
L. Anchordoqui,
B. Andrada,
S. Andringa,
C. Aramo,
P. R. Araújo Ferreira,
H. Asorey,
P. Assis,
G. Avila,
A. M. Badescu,
A. Bakalova,
A. Balaceanu,
F. Barbato,
R. J. Barreira Luz,
K. H. Becker,
J. A. Bellido
, et al. (335 additional authors not shown)
Abstract:
AMIGA (Auger Muons and Infill for the Ground Array) is an upgrade of the Pierre Auger Observatory to complement the study of ultra-high-energy cosmic rays (UHECR) by measuring the muon content of extensive air showers (EAS). It consists of an array of 61 water Cherenkov detectors on a denser spacing in combination with underground scintillation detectors used for muon density measurement. Each det…
▽ More
AMIGA (Auger Muons and Infill for the Ground Array) is an upgrade of the Pierre Auger Observatory to complement the study of ultra-high-energy cosmic rays (UHECR) by measuring the muon content of extensive air showers (EAS). It consists of an array of 61 water Cherenkov detectors on a denser spacing in combination with underground scintillation detectors used for muon density measurement. Each detector is composed of three scintillation modules, with 10 m$^2$ detection area per module, buried at 2.3 m depth, resulting in a total detection area of 30 m$^2$. Silicon photomultiplier sensors (SiPM) measure the amount of scintillation light generated by charged particles traversing the modules. In this paper, the design of the front-end electronics to process the signals of those SiPMs and test results from the laboratory and from the Pierre Auger Observatory are described. Compared to our previous prototype, the new electronics shows a higher performance, higher efficiency and lower power consumption, and it has a new acquisition system with increased dynamic range that allows measurements closer to the shower core. The new acquisition system is based on the measurement of the total charge signal that the muonic component of the cosmic ray shower generates in the detector.
△ Less
Submitted 25 January, 2021; v1 submitted 12 November, 2020;
originally announced November 2020.
-
The ARTI Framework: Cosmic Rays Atmospheric Background Simulations
Authors:
Christian Sarmiento-Cano,
Mauricio Suárez-Durán,
Rolando Calderón-Ardila,
Adriana Vásquez-Ramírez,
Andrei Jaimes-Motta,
Luis A. Núñez,
Sergio Dasso,
Iván Sidelnik,
Hernán Asorey
Abstract:
ARTI is a complete framework designed to simulate the signals produced by the secondary particles emerging from the interaction of single, multiple and even, the complete flux of primary cosmic rays with the atmosphere. These signals are simulated for any particle detector located at any place (latitude, longitude and altitude), including the real-time atmospheric, geomagnetic and detector conditi…
▽ More
ARTI is a complete framework designed to simulate the signals produced by the secondary particles emerging from the interaction of single, multiple and even, the complete flux of primary cosmic rays with the atmosphere. These signals are simulated for any particle detector located at any place (latitude, longitude and altitude), including the real-time atmospheric, geomagnetic and detector conditions. Formulated through a sequence of codes written in C++, Fortran, Bash and Perl, it provides an easy-to-use integration of three different simulation environments: magnetocosmic, CORSIKA and Geant4. These tools evaluate the geomagnetic field effects on the primary flux, the atmospheric showers of cosmic rays and the detectors' response to the secondary flux of particles. In this work, we exhibit the usage of the ARTI framework by calculating the total expected flux of signals at eight selected sites of the Latin American Giant Observatory, a cosmic ray Observatory located in Latin America covering a wide range altitudes, latitudes and geomagnetic rigidities. ARTI also calculates the flux of signals expected during the sudden occurrence of a gamma-ray burst or the flux of energetic photons originating in steady gamma sources. It also compares these fluxes with the expected background to detect these phenomena in a single water Cherenkov detector deployed in high altitude sites. Even more, by using ARTI, it is possible to calculate in a very precise way the expected flux of high energetic muons and other secondaries on the ground and to inject it over a geological structure for muography applications.
△ Less
Submitted 15 November, 2022; v1 submitted 27 October, 2020;
originally announced October 2020.
-
Studies on the response of a water-Cherenkov detector of the Pierre Auger Observatory to atmospheric muons using an RPC hodoscope
Authors:
The Pierre Auger Collaboration,
A. Aab,
P. Abreu,
M. Aglietta,
J. M. Albury,
I. Allekotte,
A. Almela,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
R. Alves Batista,
G. A. Anastasi,
L. Anchordoqui,
B. Andrada,
S. Andringa,
C. Aramo,
P. R. Araújo Ferreira,
H. Asorey,
P. Assis,
G. Avila,
A. M. Badescu,
A. Bakalova,
A. Balaceanu,
F. Barbato,
R. J. Barreira Luz,
K. H. Becker
, et al. (353 additional authors not shown)
Abstract:
Extensive air showers, originating from ultra-high energy cosmic rays, have been successfully measured through the use of arrays of water-Cherenkov detectors (WCDs). Sophisticated analyses exploiting WCD data have made it possible to demonstrate that shower simulations, based on different hadronic-interaction models, cannot reproduce the observed number of muons at the ground. The accurate knowled…
▽ More
Extensive air showers, originating from ultra-high energy cosmic rays, have been successfully measured through the use of arrays of water-Cherenkov detectors (WCDs). Sophisticated analyses exploiting WCD data have made it possible to demonstrate that shower simulations, based on different hadronic-interaction models, cannot reproduce the observed number of muons at the ground. The accurate knowledge of the WCD response to muons is paramount in establishing the exact level of this discrepancy. In this work, we report on a study of the response of a WCD of the Pierre Auger Observatory to atmospheric muons performed with a hodoscope made of resistive plate chambers (RPCs), enabling us to select and reconstruct nearly 600 thousand single muon trajectories with zenith angles ranging from 0$^\circ$ to 55$^\circ$. Comparison of distributions of key observables between the hodoscope data and the predictions of dedicated simulations allows us to demonstrate the accuracy of the latter at a level of 2%. As the WCD calibration is based on its response to atmospheric muons, the hodoscope data are also exploited to show the long-term stability of the procedure.
△ Less
Submitted 9 September, 2020; v1 submitted 8 July, 2020;
originally announced July 2020.
-
Study of Spatial Resolution of Muon Hodoscopes for Muography Applications in Geophysics
Authors:
R. Calderón-Ardila,
A. Almela,
M. Gómez-Berisso,
A. Sedoski,
C. Varela,
A. Vesga-Ramírez,
H. Asorey
Abstract:
Muon radiography, also known as muography, is a non-destructive geophysical technique for the study of the internal structure of large objects such as volcanoes. This is possible by constructing an image based on the differential absorption of the directional flux of high-energy atmospheric muons produced during the interaction of cosmic rays with the atmosphere. So this no other source of radiati…
▽ More
Muon radiography, also known as muography, is a non-destructive geophysical technique for the study of the internal structure of large objects such as volcanoes. This is possible by constructing an image based on the differential absorption of the directional flux of high-energy atmospheric muons produced during the interaction of cosmic rays with the atmosphere. So this no other source of radiation is required for this technique. Many muon telescopes are being built with crossed scintillator bars and so, the resolution of each panel is essentially given by the total surface of the bar crossings. Enhancing the resolution may require covering the same area with smaller scintillator bars, which adds costs and build complexity as more scintillators and fibers are required. More channels also require more acquisition electronics which have to be synchronized, increasing the complexity of the system, with associated operating issues and the final cost. In this work, we propose a novel analysis approach to obtain a reliable sub-pixel resolution, by measuring and comparing the average signals measured at each end of the scintillation bar. This analysis approach achieves sub-pixel resolutions, augmenting the spatial resolutions of existing designs. To study the feasibility of this technique we designed a laboratory setup, to emulate muon light pulses with a pulsed laser light located at different points on optical wavelength shifter fiber. By doing this we measured an increase in the spatial resolution when compared with traditional systems. These results enable the design of new prototypes for the muography of natural and artificial structures of strategic interest. We are currently assembling a prototype detector that will use this methodology.
△ Less
Submitted 10 June, 2021; v1 submitted 4 June, 2020;
originally announced June 2020.
-
Simulated Annealing for Volcano Muography
Authors:
A. Vesga-Ramírez,
J. D. Sanabria-Gómez,
D. Sierra-Porta,
L. Arana-Salinas,
H. Asorey,
V. A. Kudryavtsev,
R. Calderón-Ardila,
L. A. Núñez
Abstract:
Muography or muon radiography is a non-invasive emerging image technology relying on high energy atmospheric muons, which complements other standard geophysical tools to understand the Earth's subsurface. This work discusses a geophysical inversion methodology for volcanic muography, based on the Simulated Annealing algorithm, using a semi-empirical model of the muon flux to reach the volcano topo…
▽ More
Muography or muon radiography is a non-invasive emerging image technology relying on high energy atmospheric muons, which complements other standard geophysical tools to understand the Earth's subsurface. This work discusses a geophysical inversion methodology for volcanic muography, based on the Simulated Annealing algorithm, using a semi-empirical model of the muon flux to reach the volcano topography and a framework for the energy loss of muons in rock. The Metropolis-Simulated-Annealing algorithm starts from an 'observed' muon flux and obtains the best associated inner density distribution function inside a synthetic model of the Cerro Machin Volcano (Tolima-Colombia). The estimated initial density model was obtained with GEOMODELER, adapted to the volcano topography. We improved this model by including rock densities from samples taken from the crater, the dome and the areas associated with fumaroles. In this paper, we determined the minimum muon energy (a function of the arrival direction) needed to cross the volcanic building, the emerging integrated flux of muons, and the density profile inside a model of Cerro Machin. The present inversion correctly reconstructed the density differences inside the Machin, within a 1 percent error concerning our initial simulation model, giving a remarkable density contrast between the volcanic duct, the encasing rock and the fumaroles area.
△ Less
Submitted 18 March, 2021; v1 submitted 17 May, 2020;
originally announced May 2020.
-
Design and construction of MuTe: a hybrid Muon Telescope to study Colombian Volcanoes
Authors:
J. Peña-Rodríguez,
J. Pisco-Guabave,
D. Sierra-Porta,
M. Suárez-Durán,
M. Arenas-Flórez,
L. M. Pérez-Archila,
J. D. Sanabria-Gómez,
H. Asorey,
L. A. Núñez
Abstract:
We present a hybrid Muon Telescope, MuTe, designed and built for imaging active Colombian volcanoes. The MuTe has a resolution of tens of meters, low power consumption, robustness and transportability making it suitable for use in difficult access zones where active volcanoes usually are. The main feature of MuTe is the implementation of a hybrid detection technique combining two scintillation pan…
▽ More
We present a hybrid Muon Telescope, MuTe, designed and built for imaging active Colombian volcanoes. The MuTe has a resolution of tens of meters, low power consumption, robustness and transportability making it suitable for use in difficult access zones where active volcanoes usually are. The main feature of MuTe is the implementation of a hybrid detection technique combining two scintillation panels for particle tracking and a Water Cherenkov Detector for filtering background sources due to the electromagnetic component of extended air showers and multiple particle events. MuTe incorporates particle-identification techniques for reducing the background noise sources and discrimination of fake events by a picosecond Time-of-Flight system. We also describe the mechanical behavior of the MuTe during typical tremors and wind conditions at the observation place, as well as the frontend electronics design and power consumption.
△ Less
Submitted 24 June, 2020; v1 submitted 20 April, 2020;
originally announced April 2020.
-
Simulated Response of MuTe, a Hybrid Muon Telescope
Authors:
A. Vásquez-Ramírez,
M. Suárez-Durán,
A. Jaimes-Motta,
R. Calderón-Ardila,
J. Peña-Rodríguez,
J. Sánchez-Villafrades,
J. D. Sanabria-Gómez,
H. Asorey,
L. A. Núñez
Abstract:
In this paper we present a complete and detailed computational model of the response of the hybrid Muon Telescope (MuTe), designed to perform muography volcanic studies. This instrument combines two particle detection techniques: first, a muon hodoscope based on two panels of plastic scintillator bars; and a Water Cherenkov detector located behind the rear scintillator panel acting both as a coinc…
▽ More
In this paper we present a complete and detailed computational model of the response of the hybrid Muon Telescope (MuTe), designed to perform muography volcanic studies. This instrument combines two particle detection techniques: first, a muon hodoscope based on two panels of plastic scintillator bars; and a Water Cherenkov detector located behind the rear scintillator panel acting both as a coincidence and a discriminating detector. The simulation model includes: materials, geometries, dimensions, and the photo-sensitiveness of the detectors. The simulation results, in agreement with the measured data, were used to set up the muon detector trigger for the expected energy dependent signal.
△ Less
Submitted 18 June, 2020; v1 submitted 20 December, 2019;
originally announced December 2019.
-
Calibration and first measurements of MuTe: a hybrid Muon Telescope for geological structures
Authors:
Jesús Peña-Rodríguez,
Adriana Vásquez-Ramírez,
José D. Sanabria-Gómez,
Luis A. Núñez,
David Sierra-Porta,
Hernán Asorey
Abstract:
In this work, we describe the calibration and first measurements in the commissioning of MuTe, a hybrid Muon Telescope with two subdetectors --a scintillator hodoscope and a Water Cherenkov Detector (WCD)-- for imaging the inner structures of Colombian volcanoes. The hodoscope estimates the trajectories of particles im**ing on the front and rear panel, while the WCD acts as a calorimeter for the…
▽ More
In this work, we describe the calibration and first measurements in the commissioning of MuTe, a hybrid Muon Telescope with two subdetectors --a scintillator hodoscope and a Water Cherenkov Detector (WCD)-- for imaging the inner structures of Colombian volcanoes. The hodoscope estimates the trajectories of particles im**ing on the front and rear panel, while the WCD acts as a calorimeter for the through going charged particle. MuTe combines particle identification techniques so as to discriminate noise background from data. It filters the primary noise sources for muography, i.e., the EM-component ($e^{\pm}$) of Extensive Air Showers (EAS) and scattered/upward-coming muons. The WCD identifies Electrons/positrons events by their deposited energy identifies, while scattered and backward muons are rejected using a pico-second Time-of-Flight(ToF) system. Muon generated events were found in the deposited energy deposited range of ($144$MeV$ < E_d <$ 400MeV), represent only about the 40$\%$ of the WCD-hodoscope acquired events. The other 60$\%$ of data is composed by ($e^{\pm}$) events under 144 MeV and multiparticle events above 400 MeV. Subsequently, low-momentum muons ($<$ 1 GeV/c), which are scattered by the volcano surface, measures a ToF $>$ 3.3 ns for traversing one meter length.
△ Less
Submitted 20 September, 2019;
originally announced September 2019.
-
Results from The Latin American Giant Observatory Space Weather Simulation Chain
Authors:
Mauricio Suárez Durán,
Hernán Asorey,
Luis A. Núñez
Abstract:
The Space Weather program of the Latin American Giant Observatory (LAGO) Collaboration was designed to study the variation of the flux of atmospheric secondary particles at ground level produced during the interaction of cosmic rays with the air. This work complements and expands the inference capabilities of the LAGO detection network to identify the influence of solar activity on the particle fl…
▽ More
The Space Weather program of the Latin American Giant Observatory (LAGO) Collaboration was designed to study the variation of the flux of atmospheric secondary particles at ground level produced during the interaction of cosmic rays with the air. This work complements and expands the inference capabilities of the LAGO detection network to identify the influence of solar activity on the particle flux, at places having different geomagnetic rigidity cut-offs and atmospheric depths. This program is developed through a series of Monte Carlo sequential simulations to compute the intensity spectrum of the various components of the radiation field on the ground. A key feature of these calculations is that we performed detailed radiation transport computations as a function of incident direction, time, altitude, as well as latitude and longitude. Magnetic rigidity calculations and corrections for geomagnetic field activity are established by using the MAGNETOCOSMICS code, and the estimation of the flux of secondaries at ground level is implemented by using the CORSIKA code; thus we can examine the local peculiarities in the penumbral regions with a more realistic description of the atmospheric and geomagnetic response in these complex regions of the rigidity space. As an example of our calculation scheme, we report some result on the flux at ground level for two LAGO locations: Bucaramanga-Colombia and San Carlos de Bariloche-Argentina, for the geomagnetically active period of May 2005.
△ Less
Submitted 14 April, 2018; v1 submitted 24 February, 2018;
originally announced February 2018.
-
Spectral Calibration of the Fluorescence Telescopes of the Pierre Auger Observatory
Authors:
The Pierre Auger Collaboration,
A. Aab,
P. Abreu,
M. Aglietta,
I. Al Samarai,
I. F. M. Albuquerque,
I. Allekotte,
A. Almela,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
G. A. Anastasi,
L. Anchordoqui,
B. Andrada,
S. Andringa,
C. Aramo,
F. Arqueros,
N. Arsene,
H. Asorey,
P. Assis,
J. Aublin,
G. Avila,
A. M. Badescu,
A. Balaceanu,
F. Barbato,
R. J. Barreira Luz
, et al. (381 additional authors not shown)
Abstract:
We present a novel method to measure precisely the relative spectral response of the fluorescence telescopes of the Pierre Auger Observatory. We used a portable light source based on a xenon flasher and a monochromator to measure the relative spectral efficiencies of eight telescopes in steps of 5 nm from 280 nm to 440 nm. Each point in a scan had approximately 2 nm FWHM out of the monochromator.…
▽ More
We present a novel method to measure precisely the relative spectral response of the fluorescence telescopes of the Pierre Auger Observatory. We used a portable light source based on a xenon flasher and a monochromator to measure the relative spectral efficiencies of eight telescopes in steps of 5 nm from 280 nm to 440 nm. Each point in a scan had approximately 2 nm FWHM out of the monochromator. Different sets of telescopes in the observatory have different optical components, and the eight telescopes measured represent two each of the four combinations of components represented in the observatory. We made an end-to-end measurement of the response from different combinations of optical components, and the monochromator setup allowed for more precise and complete measurements than our previous multi-wavelength calibrations. We find an overall uncertainty in the calibration of the spectral response of most of the telescopes of 1.5% for all wavelengths; the six oldest telescopes have larger overall uncertainties of about 2.2%. We also report changes in physics measureables due to the change in calibration, which are generally small.
△ Less
Submitted 2 October, 2017; v1 submitted 5 September, 2017;
originally announced September 2017.
-
Muon Tomography sites for Colombian volcanoes
Authors:
A. Vesga-Ramírez,
D. Sierra-Porta,
J. Pena-Rodriguez,
J. D. Sanabria-Gomez,
M. Valencia-Otero,
C. Sarmiento-Cano,
M. Suarez-Duran,
H. Asorey,
L. A. Nunez
Abstract:
By using a very detailed simulation scheme, we have calculated the cosmic ray background flux at 13 active Colombian volcanoes and developed a methodology to identify the most convenient places for a muon telescope to study their inner structure.
Our simulation scheme considers three critical factors with different spatial and time scales: the geomagnetic effects, the development of extensive ai…
▽ More
By using a very detailed simulation scheme, we have calculated the cosmic ray background flux at 13 active Colombian volcanoes and developed a methodology to identify the most convenient places for a muon telescope to study their inner structure.
Our simulation scheme considers three critical factors with different spatial and time scales: the geomagnetic effects, the development of extensive air showers in the atmosphere, and the detector response at ground level. The muon energy dissipation along the path crossing the geological structure is modeled considering the losses due to ionization, and also contributions from radiative Bremstrahlung, nuclear interactions, and pair production.
By considering each particular volcano topography and assuming reasonable statistics for different instrument acceptances, we obtained the muon flux crossing each structure and estimated the exposure time for our hybrid muon telescope at several points around each geological edifice. After a detailed study from the topography, we have identified the best volcano to be studied, spotted the finest points to place a muon telescope and estimated its time exposures for a significant statistics of muon flux.
We have devised a mix of technical and logistic criteria --the ``rule of thumb'' criteria-- and found that only Cerro Machin, located at the Cordillera Central (4$^{\circ}$29'N 75$^{\circ}$22'W), can be feasibly studied today through muography. Cerro Negro and Chiles could be good candidates shortly
△ Less
Submitted 27 December, 2019; v1 submitted 27 May, 2017;
originally announced May 2017.
-
A simulation chain for the LAGO Space Weather Program
Authors:
Hernan Asorey,
Luis A. Núñez,
Mauricio Suárez-Durán
Abstract:
We simulate the expected variations of background flux at two particular sites of the Latin American Giant Observatory (LAGO) and found that these fluxes are sensible to the latitude and that neutrons and muons components, of cosmic rays, are affected due to the variation of the geomagnetic field (GF).
We simulate the expected variations of background flux at two particular sites of the Latin American Giant Observatory (LAGO) and found that these fluxes are sensible to the latitude and that neutrons and muons components, of cosmic rays, are affected due to the variation of the geomagnetic field (GF).
△ Less
Submitted 25 April, 2017;
originally announced April 2017.
-
Astroparticle Techniques: Colombia active volcano candidates for Muon Telescope observation sites
Authors:
H. Asorey,
A. Balaguera-Rojas,
L. A. Núñez,
J. D. Sanabria-Gómez,
C. Sarmiento-Cano,
M. Súarez-Duran,
M. Valencia-Otero,
A. Vesga-Ramírez
Abstract:
We discuss a methodology to identify observation points for muongraphy of active Colombian Volcanoes and it is found that only Cerro Machin can be studied.
We discuss a methodology to identify observation points for muongraphy of active Colombian Volcanoes and it is found that only Cerro Machin can be studied.
△ Less
Submitted 18 April, 2017; v1 submitted 17 April, 2017;
originally announced April 2017.
-
Astroparticle Techniques: Simulating Cosmic Rays induced Background Radiation on Aircrafts
Authors:
H. Asorey,
L. A. Núñez,
C. Y. Pérez Arias,
S. Pinilla,
F. Quiñonez,
M. Suárez-Durán
Abstract:
Incident cosmic ray fluxes over flying aircrafts are compared with those in Bucaramanga, Colombia and very significant differences are observed for proton and neutron fluxes. We also obtained that major contributions in the deposited energy by Cherenkov photons on blood plasma is in the UV-C band.
Incident cosmic ray fluxes over flying aircrafts are compared with those in Bucaramanga, Colombia and very significant differences are observed for proton and neutron fluxes. We also obtained that major contributions in the deposited energy by Cherenkov photons on blood plasma is in the UV-C band.
△ Less
Submitted 7 April, 2017;
originally announced April 2017.
-
Muon Counting using Silicon Photomultipliers in the AMIGA detector of the Pierre Auger Observatory
Authors:
The Pierre Auger Collaboration,
A. Aab,
P. Abreu,
M. Aglietta,
E. J. Ahn,
I. Al Samarai,
I. F. M. Albuquerque,
I. Allekotte,
P. Allison,
A. Almela,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
M. Ambrosio,
G. A. Anastasi,
L. Anchordoqui,
B. Andrada,
S. Andringa,
C. Aramo,
F. Arqueros,
N. Arsene,
H. Asorey,
P. Assis,
J. Aublin,
G. Avila,
A. M. Badescu
, et al. (400 additional authors not shown)
Abstract:
AMIGA (Auger Muons and Infill for the Ground Array) is an upgrade of the Pierre Auger Observatory designed to extend its energy range of detection and to directly measure the muon content of the cosmic ray primary particle showers. The array will be formed by an infill of surface water-Cherenkov detectors associated with buried scintillation counters employed for muon counting. Each counter is com…
▽ More
AMIGA (Auger Muons and Infill for the Ground Array) is an upgrade of the Pierre Auger Observatory designed to extend its energy range of detection and to directly measure the muon content of the cosmic ray primary particle showers. The array will be formed by an infill of surface water-Cherenkov detectors associated with buried scintillation counters employed for muon counting. Each counter is composed of three scintillation modules, with a 10 m$^2$ detection area per module. In this paper, a new generation of detectors, replacing the current multi-pixel photomultiplier tube (PMT) with silicon photo sensors (aka. SiPMs), is proposed. The selection of the new device and its front-end electronics is explained. A method to calibrate the counting system that ensures the performance of the detector is detailed. This method has the advantage of being able to be carried out in a remote place such as the one where the detectors are deployed. High efficiency results, i.e. 98 % efficiency for the highest tested overvoltage, combined with a low probability of accidental counting ($\sim$2 %), show a promising performance for this new system.
△ Less
Submitted 4 October, 2017; v1 submitted 17 March, 2017;
originally announced March 2017.
-
Prototype muon detectors for the AMIGA component of the Pierre Auger Observatory
Authors:
The Pierre Auger Collaboration,
A. Aab,
P. Abreu,
M. Aglietta,
E. J. Ahn,
I. Al Samarai,
I. F. M. Albuquerque,
I. Allekotte,
P. Allison,
A. Almela,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
R. Alves Batista,
M. Ambrosio,
A. Aminaei,
G. A. Anastasi,
L. Anchordoqui,
B. Andrada,
S. Andringa,
C. Aramo,
F. Arqueros,
N. Arsene,
H. Asorey,
P. Assis,
J. Aublin
, et al. (429 additional authors not shown)
Abstract:
Auger Muons and Infill for the Ground Array) is an upgrade of the Pierre Auger Observatory to extend its range of detection and to directly measure the muon content of the particle showers. It consists of an infill of surface water-Cherenkov detectors accompanied by buried scintillator detectors used for muon counting. The main objectives of the AMIGA engineering array, referred to as the Unitary…
▽ More
Auger Muons and Infill for the Ground Array) is an upgrade of the Pierre Auger Observatory to extend its range of detection and to directly measure the muon content of the particle showers. It consists of an infill of surface water-Cherenkov detectors accompanied by buried scintillator detectors used for muon counting. The main objectives of the AMIGA engineering array, referred to as the Unitary Cell, are to identify and resolve all engineering issues as well as to understand the muon-number counting uncertainties related to the design of the detector. The mechanical design, fabrication and deployment processes of the muon counters of the Unitary Cell are described in this document. These muon counters modules comprise sealed PVC casings containing plastic scintillation bars, wavelength-shifter optical fibers, 64 pixel photomultiplier tubes, and acquisition electronics. The modules are buried approximately 2.25 m below ground level in order to minimize contamination from electromagnetic shower particles. The mechanical setup, which allows access to the electronics for maintenance, is also described in addition to tests of the modules' response and integrity. The completed Unitary Cell has measured a number of air showers of which a first analysis of a sample event is included here.
△ Less
Submitted 12 May, 2016; v1 submitted 5 May, 2016;
originally announced May 2016.
-
Nanosecond-level time synchronization of autonomous radio detector stations for extensive air showers
Authors:
The Pierre Auger Collaboration,
A. Aab,
P. Abreu,
M. Aglietta,
E. J. Ahn,
I. Al Samarai,
I. F. M. Albuquerque,
I. Allekotte,
P. Allison,
A. Almela,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
R. Alves Batista,
M. Ambrosio,
A. Aminaei,
G. A. Anastasi,
L. Anchordoqui,
S. Andringa,
C. Aramo,
F. Arqueros,
N. Arsene,
H. Asorey,
P. Assis,
J. Aublin,
G. Avila
, et al. (426 additional authors not shown)
Abstract:
To exploit the full potential of radio measurements of cosmic-ray air showers at MHz frequencies, a detector timing synchronization within 1 ns is needed. Large distributed radio detector arrays such as the Auger Engineering Radio Array (AERA) rely on timing via the Global Positioning System (GPS) for the synchronization of individual detector station clocks. Unfortunately, GPS timing is expected…
▽ More
To exploit the full potential of radio measurements of cosmic-ray air showers at MHz frequencies, a detector timing synchronization within 1 ns is needed. Large distributed radio detector arrays such as the Auger Engineering Radio Array (AERA) rely on timing via the Global Positioning System (GPS) for the synchronization of individual detector station clocks. Unfortunately, GPS timing is expected to have an accuracy no better than about 5 ns. In practice, in particular in AERA, the GPS clocks exhibit drifts on the order of tens of ns. We developed a technique to correct for the GPS drifts, and an independent method is used for cross-checks that indeed we reach nanosecond-scale timing accuracy by this correction. First, we operate a "beacon transmitter" which emits defined sine waves detected by AERA antennas recorded within the physics data. The relative phasing of these sine waves can be used to correct for GPS clock drifts. In addition to this, we observe radio pulses emitted by commercial airplanes, the position of which we determine in real time from Automatic Dependent Surveillance Broadcasts intercepted with a software-defined radio. From the known source location and the measured arrival times of the pulses we determine relative timing offsets between radio detector stations. We demonstrate with a combined analysis that the two methods give a consistent timing calibration with an accuracy of 2 ns or better. Consequently, the beacon method alone can be used in the future to continuously determine and correct for GPS clock drifts in each individual event measured by AERA.
△ Less
Submitted 15 February, 2016; v1 submitted 7 December, 2015;
originally announced December 2015.
-
Cosmic Rays Induced Background Radiation on Board of Commercial Flights
Authors:
S. Pinilla,
H. Asorey,
L. A. Núñez
Abstract:
The aim of this work is to determine the total integrated flux of cosmic radiation which a commercial aircraft is exposed to along specific flight trajectories. To study the radiation background during a flight and its modulation by effects such as altitude, latitude, exposure time and transient magnetospheric events, we perform simulations based on Magnetocosmics and CORSIKA codes, the former des…
▽ More
The aim of this work is to determine the total integrated flux of cosmic radiation which a commercial aircraft is exposed to along specific flight trajectories. To study the radiation background during a flight and its modulation by effects such as altitude, latitude, exposure time and transient magnetospheric events, we perform simulations based on Magnetocosmics and CORSIKA codes, the former designed to calculate the geomagnetic effects on cosmic rays propagation and the latter allows us to simulate the development of extended air showers in the atmosphere. In this first work, by considering the total flux of cosmic rays from 5 GeV to 1 PeV, we obtained the expected integrated flux of secondary particles on board of a commercial airplane during the Bogotá-Buenos Aires trip by point-to-point numerical integration.
△ Less
Submitted 20 March, 2015;
originally announced March 2015.
-
Exposición Temprana de Nativos Digitales en Ambientes, Metodologías y Técnicas de Investigación en la Universidad
Authors:
H. Asorey,
L. A. Nunez,
C. Sarmiento-Cano
Abstract:
Being aware of the motivation problems observed in many scientific oriented careers, we present two experiences to expose to college students to environments, methodologies and discovery techniques addressing contemporary problems. This experiences are developed in two complementary contexts: an Introductory Physics course, where we motivated to physics students to participate in research activiti…
▽ More
Being aware of the motivation problems observed in many scientific oriented careers, we present two experiences to expose to college students to environments, methodologies and discovery techniques addressing contemporary problems. This experiences are developed in two complementary contexts: an Introductory Physics course, where we motivated to physics students to participate in research activities, and a multidisciplinary hotbed of research oriented to advanced undergraduate students of Science and Engineering (that even produced three poster presentations in international conferences). Although these are preliminary results and require additional editions to get statistical significance, we consider they are encouraging results. On both contexts we observe an increase in the students motivation to orient their careers with emphasizing on research. In this work, besides the contextualization support for these experiences, we describe six specific activities to link our students to research areas, which we believe can be replicated on similar environments in other educational institutions.
△ Less
Submitted 20 January, 2015;
originally announced January 2015.
-
Fermi Problem: Power developed at the eruption of the Puyehue-Cordón Caulle volcanic system in June 2011
Authors:
Hernan Asorey,
Arturo López Dávalos
Abstract:
On June 4 2011 the Puyehue-Cordón Caulle volcanic system produced a pyroclastic subplinian eruption reaching level 3 in the volcanic explosivity index. The first stage of the eruption released sand and ashes that affected small towns and cities in the surrounding areas, including San Carlos de Bariloche, in Argentina, one of the largest cities in the North Patagonian andean region. By treating the…
▽ More
On June 4 2011 the Puyehue-Cordón Caulle volcanic system produced a pyroclastic subplinian eruption reaching level 3 in the volcanic explosivity index. The first stage of the eruption released sand and ashes that affected small towns and cities in the surrounding areas, including San Carlos de Bariloche, in Argentina, one of the largest cities in the North Patagonian andean region. By treating the eruption as a Fermi problem, we estimated the volume and mass of sand ejected as well as the energy and power released during the eruptive phase. We then put the results in context by comparing the obtained values with everyday quantities, like the load of a cargo truck or the electric power produced in Argentina. These calculations have been done as a pedagogic exercise, and after evaluation of the hypothesis was done in the classroom, the calculations have been performed by the students. These are students of the first physics course at the Physics and Chemistry Teacher Programs of the Universidad Nacional de Río Negro.
△ Less
Submitted 21 January, 2015; v1 submitted 6 September, 2011;
originally announced September 2011.
-
The Pierre Auger Observatory V: Enhancements
Authors:
The Pierre Auger Collaboration,
P. Abreu,
M. Aglietta,
E. J. Ahn,
I. F. M. Albuquerque,
D. Allard,
I. Allekotte,
J. Allen,
P. Allison,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
M. Ambrosio,
A. Aminaei,
L. Anchordoqui,
S. Andringa,
T. Antičić,
A. Anzalone,
C. Aramo,
E. Arganda,
F. Arqueros,
H. Asorey,
P. Assis,
J. Aublin,
M. Ave,
M. Avenier
, et al. (471 additional authors not shown)
Abstract:
Ongoing and planned enhancements of the Pierre Auger Observatory
Ongoing and planned enhancements of the Pierre Auger Observatory
△ Less
Submitted 24 July, 2011;
originally announced July 2011.
-
The Pierre Auger Observatory IV: Operation and Monitoring
Authors:
The Pierre Auger Collaboration,
P. Abreu,
M. Aglietta,
E. J. Ahn,
I. F. M. Albuquerque,
D. Allard,
I. Allekotte,
J. Allen,
P. Allison,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
M. Ambrosio,
A. Aminaei,
L. Anchordoqui,
S. Andringa,
T. Antičić,
A. Anzalone,
C. Aramo,
E. Arganda,
F. Arqueros,
H. Asorey,
P. Assis,
J. Aublin,
M. Ave,
M. Avenier
, et al. (471 additional authors not shown)
Abstract:
Technical reports on operations and monitoring of the Pierre Auger Observatory
Technical reports on operations and monitoring of the Pierre Auger Observatory
△ Less
Submitted 24 July, 2011;
originally announced July 2011.
